! Started logfile: /image_prod/ug002_uva//J0050-0929_S_i_dfm.log on Wed Mar 4 18:41:02 2020 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /image_prod/ug002_uva//J0050-0929_S_i_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0050-0929_S_i_uva.fits ! AN table 1: 6 integrations on 21 of 21 possible baselines. ! Apparent sampling: 0.873016 visibilities/baseline/integration-bin. ! Found source: J0050-0929 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 36 lines of history. ! ! Reading 330 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0050-0929_S_i] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.048840Jy sigma=13.386905 ! Fit after self-cal, rms=0.630344Jy sigma=7.790881 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.573 mas, bmaj=13.62 mas, bpa=-15.78 degrees ! Estimated noise=3.94764 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.295833 Jy ! Component: 100 - total flux cleaned = 0.363061 Jy ! Total flux subtracted in 100 components = 0.363061 Jy ! Clean residual min=-0.024854 max=0.028141 Jy/beam ! Clean residual mean=0.000028 rms=0.007912 Jy/beam ! Combined flux in latest and established models = 0.363061 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.363061 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.075173Jy sigma=0.893880 ! Fit after self-cal, rms=0.075171Jy sigma=0.893649 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.073 mas, bmaj=12.83 mas, bpa=-14.83 degrees ! Estimated noise=3.26595 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0248587 Jy ! Component: 100 - total flux cleaned = 0.0390417 Jy ! Component: 150 - total flux cleaned = 0.0489622 Jy ! Component: 200 - total flux cleaned = 0.0565668 Jy ! Total flux subtracted in 200 components = 0.0565668 Jy ! Clean residual min=-0.013379 max=0.011697 Jy/beam ! Clean residual mean=0.000010 rms=0.003411 Jy/beam ! Combined flux in latest and established models = 0.419628 Jy ! Performing phase self-cal ! Adding 52 model components to the UV plane model. ! The established model now contains 61 components and 0.419627 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.067325Jy sigma=0.746628 ! Fit after self-cal, rms=0.067324Jy sigma=0.746158 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.073 x 12.83 at -14.83 degrees (North through East) ! Clean map min=-0.013493 max=0.37911 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00 HN 1.05 KP 1.02 ! MK 1.01 NL 0.97 OV 0.92 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 HN 1.04 KP 1.00 ! MK 1.07 NL 1.14 OV 0.94 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 0.99 HN 1.02 KP 0.99 ! MK 1.00 NL 0.90 OV 0.92 ! ! ! Fit before self-cal, rms=0.067324Jy sigma=0.746158 ! Fit after self-cal, rms=0.063776Jy sigma=0.643776 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.098 mas, bmaj=13.01 mas, bpa=-14.84 degrees ! Estimated noise=3.25686 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00257301 Jy ! Component: 100 - total flux cleaned = 0.00355536 Jy ! Component: 150 - total flux cleaned = 0.00420431 Jy ! Component: 200 - total flux cleaned = 0.00453546 Jy ! Total flux subtracted in 200 components = 0.00453546 Jy ! Clean residual min=-0.007652 max=0.006925 Jy/beam ! Clean residual mean=0.000000 rms=0.001775 Jy/beam ! Combined flux in latest and established models = 0.424163 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 74 components and 0.424163 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.063531Jy sigma=0.640652 ! Fit after self-cal, rms=0.063637Jy sigma=0.640222 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.063637Jy sigma=0.640222 ! Fit after self-cal, rms=0.063678Jy sigma=0.640054 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.099 mas, bmaj=13 mas, bpa=-14.83 degrees ! Estimated noise=3.26205 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00150505 Jy ! Component: 100 - total flux cleaned = 0.00207723 Jy ! Component: 150 - total flux cleaned = 0.00265503 Jy ! Component: 200 - total flux cleaned = 0.00302688 Jy ! Total flux subtracted in 200 components = 0.00302688 Jy ! Clean residual min=-0.007176 max=0.006408 Jy/beam ! Clean residual mean=-0.000001 rms=0.001683 Jy/beam ! Combined flux in latest and established models = 0.42719 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 83 components and 0.42719 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.063540Jy sigma=0.638343 ! Fit after self-cal, rms=0.063532Jy sigma=0.638237 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000222498 Jy ! Component: 100 - total flux cleaned = 0.000369353 Jy ! Component: 150 - total flux cleaned = 0.000509275 Jy ! Component: 200 - total flux cleaned = 0.00060126 Jy ! Total flux subtracted in 200 components = 0.00060126 Jy ! Clean residual min=-0.006870 max=0.006149 Jy/beam ! Clean residual mean=-0.000001 rms=0.001634 Jy/beam ! Combined flux in latest and established models = 0.427791 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 87 components and 0.427791 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.063460Jy sigma=0.637211 ! Fit after self-cal, rms=0.063458Jy sigma=0.637182 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.063458Jy sigma=0.637182 ! Fit after self-cal, rms=0.063540Jy sigma=0.637043 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.098 mas, bmaj=13 mas, bpa=-14.82 degrees ! Estimated noise=3.26805 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000822675 Jy ! Component: 100 - total flux cleaned = 0.00101801 Jy ! Component: 150 - total flux cleaned = 0.00128958 Jy ! Component: 200 - total flux cleaned = 0.00150221 Jy ! Total flux subtracted in 200 components = 0.00150221 Jy ! Clean residual min=-0.006753 max=0.005882 Jy/beam ! Clean residual mean=-0.000001 rms=0.001594 Jy/beam ! Combined flux in latest and established models = 0.429293 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 91 components and 0.429293 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.063459Jy sigma=0.636250 ! Fit after self-cal, rms=0.063459Jy sigma=0.636234 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000303165 Jy ! Component: 100 - total flux cleaned = 0.000420848 Jy ! Component: 150 - total flux cleaned = 0.0005355 Jy ! Component: 200 - total flux cleaned = 0.000610057 Jy ! Total flux subtracted in 200 components = 0.000610057 Jy ! Clean residual min=-0.006576 max=0.005795 Jy/beam ! Clean residual mean=-0.000002 rms=0.001566 Jy/beam ! Combined flux in latest and established models = 0.429903 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 92 components and 0.429903 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.063412Jy sigma=0.635627 ! Fit after self-cal, rms=0.063412Jy sigma=0.635622 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.063412Jy sigma=0.635622 ! Fit after self-cal, rms=0.063518Jy sigma=0.635504 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.575 mas, bmaj=13.9 mas, bpa=-3.034 degrees ! Estimated noise=3.85969 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000528115 Jy ! Component: 100 - total flux cleaned = 0.000104884 Jy ! Component: 150 - total flux cleaned = 0.000648882 Jy ! Component: 200 - total flux cleaned = 0.000953976 Jy ! Total flux subtracted in 200 components = 0.000953976 Jy ! Clean residual min=-0.006355 max=0.005198 Jy/beam ! Clean residual mean=-0.000005 rms=0.001696 Jy/beam ! Combined flux in latest and established models = 0.430857 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 101 components and 0.430857 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.063540Jy sigma=0.635286 ! Fit after self-cal, rms=0.063531Jy sigma=0.635079 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.86058e-05 Jy ! Component: 100 - total flux cleaned = 6.34081e-05 Jy ! Component: 150 - total flux cleaned = 0.000170675 Jy ! Component: 200 - total flux cleaned = 0.000272012 Jy ! Total flux subtracted in 200 components = 0.000272012 Jy ! Clean residual min=-0.006065 max=0.004898 Jy/beam ! Clean residual mean=-0.000005 rms=0.001632 Jy/beam ! Combined flux in latest and established models = 0.431129 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 106 components and 0.431129 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.063556Jy sigma=0.635332 ! Fit after self-cal, rms=0.063558Jy sigma=0.635268 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.097 mas, bmaj=13.01 mas, bpa=-14.82 degrees ! Estimated noise=3.27391 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.097 x 13.01 at -14.82 degrees (North through East) ! Clean map min=-0.005427 max=0.37687 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.603 mas, bmaj=13.85 mas, bpa=-15.76 degrees ! Estimated noise=3.91836 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.293592 Jy ! Component: 100 - total flux cleaned = 0.358884 Jy ! Component: 150 - total flux cleaned = 0.381963 Jy ! Component: 200 - total flux cleaned = 0.39463 Jy ! Total flux subtracted in 200 components = 0.39463 Jy ! Clean residual min=-0.011771 max=0.010646 Jy/beam ! Clean residual mean=0.000009 rms=0.003088 Jy/beam ! Combined flux in latest and established models = 0.39463 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.39463 Jy ! Inverting map and beam ! Estimated beam: bmin=3.097 mas, bmaj=13.01 mas, bpa=-14.82 degrees ! Estimated noise=3.27391 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00870982 Jy ! Component: 100 - total flux cleaned = 0.0148091 Jy ! Component: 150 - total flux cleaned = 0.019631 Jy ! Component: 200 - total flux cleaned = 0.0235862 Jy ! Total flux subtracted in 200 components = 0.0235862 Jy ! Clean residual min=-0.008567 max=0.005554 Jy/beam ! Clean residual mean=0.000003 rms=0.001893 Jy/beam ! Combined flux in latest and established models = 0.418217 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 67 components and 0.418217 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.575 mas, bmaj=13.9 mas, bpa=-3.034 degrees ! Estimated noise=3.85969 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00450264 Jy ! Component: 100 - total flux cleaned = 0.00747642 Jy ! Component: 150 - total flux cleaned = 0.00964489 Jy ! Component: 200 - total flux cleaned = 0.0105966 Jy ! Total flux subtracted in 200 components = 0.0105966 Jy ! Clean residual min=-0.006700 max=0.005305 Jy/beam ! Clean residual mean=-0.000002 rms=0.001823 Jy/beam ! Combined flux in latest and established models = 0.428813 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000521002 Jy ! Component: 100 - total flux cleaned = 0.000676358 Jy ! Component: 150 - total flux cleaned = 0.000870184 Jy ! Component: 200 - total flux cleaned = 0.00105066 Jy ! Total flux subtracted in 200 components = 0.00105066 Jy ! Clean residual min=-0.006330 max=0.004957 Jy/beam ! Clean residual mean=-0.000003 rms=0.001727 Jy/beam ! Combined flux in latest and established models = 0.429864 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 96 components and 0.429864 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.097 mas, bmaj=13.01 mas, bpa=-14.82 degrees ! Estimated noise=3.27391 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000262754 Jy ! Component: 100 - total flux cleaned = 0.000328889 Jy ! Component: 150 - total flux cleaned = 0.000711024 Jy ! Component: 200 - total flux cleaned = 0.000997274 Jy ! Total flux subtracted in 200 components = 0.000997274 Jy ! Clean residual min=-0.007007 max=0.005087 Jy/beam ! Clean residual mean=-0.000001 rms=0.001596 Jy/beam ! Combined flux in latest and established models = 0.430861 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 115 components and 0.430861 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.063589Jy sigma=0.636914 ! Fit after self-cal, rms=0.063608Jy sigma=0.636791 wmodel J0050-0929_S_i_map.mod ! Writing 115 model components to file: J0050-0929_S_i_map.mod wobs J0050-0929_S_i_uvs.fits ! Writing UV FITS file: J0050-0929_S_i_uvs.fits wwins J0050-0929_S_i_map.win ! wwins: Wrote 1 windows to J0050-0929_S_i_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00244367 Jy ! Component: 100 - total flux cleaned = -0.00326995 Jy ! Component: 150 - total flux cleaned = -0.0033573 Jy ! Component: 200 - total flux cleaned = -0.00312618 Jy ! Component: 250 - total flux cleaned = -0.0029152 Jy ! Component: 300 - total flux cleaned = -0.00298103 Jy ! Component: 350 - total flux cleaned = -0.00323997 Jy ! Component: 400 - total flux cleaned = -0.00342629 Jy ! Component: 450 - total flux cleaned = -0.0036657 Jy ! Component: 500 - total flux cleaned = -0.0039542 Jy ! Component: 550 - total flux cleaned = -0.00428924 Jy ! Component: 600 - total flux cleaned = -0.00450574 Jy ! Component: 650 - total flux cleaned = -0.00492915 Jy ! Component: 700 - total flux cleaned = -0.00513467 Jy ! Component: 750 - total flux cleaned = -0.0053862 Jy ! Component: 800 - total flux cleaned = -0.00553398 Jy ! Component: 850 - total flux cleaned = -0.00567806 Jy ! Component: 900 - total flux cleaned = -0.00572427 Jy ! Component: 950 - total flux cleaned = -0.00586226 Jy ! Component: 1000 - total flux cleaned = -0.00599861 Jy ! Component: 1050 - total flux cleaned = -0.00622143 Jy ! Component: 1100 - total flux cleaned = -0.00630858 Jy ! Component: 1150 - total flux cleaned = -0.006438 Jy ! Component: 1200 - total flux cleaned = -0.00669348 Jy ! Component: 1250 - total flux cleaned = -0.00719716 Jy ! Component: 1300 - total flux cleaned = -0.00757171 Jy ! Component: 1350 - total flux cleaned = -0.00794361 Jy ! Component: 1400 - total flux cleaned = -0.00835382 Jy ! Component: 1450 - total flux cleaned = -0.00859851 Jy ! Component: 1500 - total flux cleaned = -0.00896381 Jy ! Component: 1550 - total flux cleaned = -0.00924706 Jy ! Component: 1600 - total flux cleaned = -0.00961055 Jy ! Component: 1650 - total flux cleaned = -0.00989256 Jy ! Component: 1700 - total flux cleaned = -0.0102159 Jy ! Component: 1750 - total flux cleaned = -0.0104589 Jy ! Component: 1800 - total flux cleaned = -0.0107026 Jy ! Component: 1850 - total flux cleaned = -0.0109067 Jy ! Component: 1900 - total flux cleaned = -0.0109887 Jy ! Component: 1950 - total flux cleaned = -0.0111533 Jy ! Component: 2000 - total flux cleaned = -0.0112359 Jy ! Component: 2050 - total flux cleaned = -0.011319 Jy ! Component: 2100 - total flux cleaned = -0.0114021 Jy ! Component: 2150 - total flux cleaned = -0.0114024 Jy ! Component: 2200 - total flux cleaned = -0.0114026 Jy ! Component: 2250 - total flux cleaned = -0.0115315 Jy ! Component: 2300 - total flux cleaned = -0.0116183 Jy ! Component: 2350 - total flux cleaned = -0.011751 Jy ! Component: 2400 - total flux cleaned = -0.0118855 Jy ! Component: 2450 - total flux cleaned = -0.0120679 Jy ! Component: 2500 - total flux cleaned = -0.0122072 Jy ! Component: 2550 - total flux cleaned = -0.0123489 Jy ! Component: 2600 - total flux cleaned = -0.0125419 Jy ! Component: 2650 - total flux cleaned = -0.012788 Jy ! Component: 2700 - total flux cleaned = -0.012889 Jy ! Component: 2750 - total flux cleaned = -0.013042 Jy ! Component: 2800 - total flux cleaned = -0.0131994 Jy ! Component: 2850 - total flux cleaned = -0.0133598 Jy ! Component: 2900 - total flux cleaned = -0.0135811 Jy ! Component: 2950 - total flux cleaned = -0.0136383 Jy ! Component: 3000 - total flux cleaned = -0.0138706 Jy ! Component: 3050 - total flux cleaned = -0.0140495 Jy ! Component: 3100 - total flux cleaned = -0.0141727 Jy ! Component: 3150 - total flux cleaned = -0.0143608 Jy ! Component: 3200 - total flux cleaned = -0.0144905 Jy ! Component: 3250 - total flux cleaned = -0.0146219 Jy ! Component: 3300 - total flux cleaned = -0.0148254 Jy ! Component: 3350 - total flux cleaned = -0.0150365 Jy ! Component: 3400 - total flux cleaned = -0.0151803 Jy ! Component: 3450 - total flux cleaned = -0.0152532 Jy ! Component: 3500 - total flux cleaned = -0.0154797 Jy ! Component: 3550 - total flux cleaned = -0.015636 Jy ! Component: 3600 - total flux cleaned = -0.0158754 Jy ! Component: 3650 - total flux cleaned = -0.0159566 Jy ! Component: 3700 - total flux cleaned = -0.0162081 Jy ! Component: 3750 - total flux cleaned = -0.0163831 Jy ! Component: 3800 - total flux cleaned = -0.016737 Jy ! Component: 3850 - total flux cleaned = -0.0169198 Jy ! Component: 3900 - total flux cleaned = -0.0171066 Jy ! Component: 3950 - total flux cleaned = -0.0174902 Jy ! Component: 4000 - total flux cleaned = -0.017688 Jy ! Component: 4050 - total flux cleaned = -0.0179932 Jy ! Total flux subtracted in 4096 components = -0.0182029 Jy ! Clean residual min=-0.006514 max=0.005994 Jy/beam ! Clean residual mean=-0.000021 rms=0.001496 Jy/beam ! Combined flux in latest and established models = 0.412658 Jy keep ! Adding 192 model components to the UV plane model. ! The established model now contains 307 components and 0.412658 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0050-0929_S_i_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.097 x 13.01 at -14.82 degrees (North through East) ! Clean map min=-0.015007 max=0.37964 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0050-0929_S_i_map.fits wmodel /image_prod/ug002_uva//J0050-0929_S_i_map.mod ! Writing 307 model components to file: /image_prod/ug002_uva//J0050-0929_S_i_map.mod wobs /image_prod/ug002_uva//J0050-0929_S_i_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0050-0929_S_i_uvs.fits wwins /image_prod/ug002_uva//J0050-0929_S_i_map.win ! wwins: Wrote 2 windows to /image_prod/ug002_uva//J0050-0929_S_i_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.379643 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00159253 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.25844 1.25844 2.51688 5.03376 10.0675 20.1351 40.2701 80.5402 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0047 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.379 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 238.39 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0050-0929_S_i_dfm.log closed on Wed Mar 4 18:41:06 2020