! Started logfile: /image_prod/ug002_uva//J0050-0929_S_h_dfm.log on Wed Mar  4 18:40:57 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J0050-0929_S_h_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J0050-0929_S_h_uva.fits
! AN table 1: 6 integrations on 36 of 36 possible baselines.
! AN table 2: 6 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.87037 visibilities/baseline/integration-bin.
! Found source: J0050-0929
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 1128 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0050-0929_S_h]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 4 telescope corrections were flagged in sub-array 1.
!  A total of 4 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 4 telescope corrections were flagged in sub-array 1.
!  A total of 4 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 4 telescope corrections were flagged in sub-array 1.
!  A total of 4 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.079152Jy  sigma=7.554542
! Fit after  self-cal, rms=0.598380Jy  sigma=4.182295
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.702 mas, bmaj=6.915 mas, bpa=-2.528 degrees
! Estimated noise=3.68056 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.309035 Jy
! Component: 100  -  total flux cleaned = 0.377477 Jy
! Total flux subtracted in 100 components = 0.377477 Jy
! Clean residual min=-0.015020 max=0.022501 Jy/beam
! Clean residual mean=0.000035 rms=0.003879 Jy/beam
! Combined flux in latest and established models = 0.377478 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 0.377478 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.107412Jy  sigma=0.573656
! Fit after  self-cal, rms=0.107421Jy  sigma=0.573641
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.114 mas, bmaj=7.793 mas, bpa=-1.662 degrees
! Estimated noise=3.21294 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0276894 Jy
! Component: 100  -  total flux cleaned = 0.0401832 Jy
! Component: 150  -  total flux cleaned = 0.0472007 Jy
! Component: 200  -  total flux cleaned = 0.0513809 Jy
! Total flux subtracted in 200 components = 0.0513809 Jy
! Clean residual min=-0.015457 max=0.013624 Jy/beam
! Clean residual mean=-0.000008 rms=0.003433 Jy/beam
! Combined flux in latest and established models = 0.428858 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 27 components and 0.428858 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.098024Jy  sigma=0.529309
! Fit after  self-cal, rms=0.098055Jy  sigma=0.529143
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.114 x 7.793 at -1.662 degrees (North through East)
! Clean map  min=-0.015096  max=0.39847 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.99     HN        0.85     KP        1.04     
!   LA        1.02     MK        0.92     NL        0.95     OV        0.92     
!   SC        1.00     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.18     FD        0.95     HN        1.11     KP        1.06     
!   LA        1.05     MK        0.98     OV        0.92     PT        1.13     
!   SC        0.93     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.01     HN        0.78     KP        1.07     
!   LA        1.04     MK        1.02     NL        0.74     OV        0.95     
!   SC        1.08     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.93     FD        0.99     HN        1.09     KP        1.03     
!   LA        1.09     MK        1.02     OV        0.93     PT        1.07     
!   SC        1.14     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.88     FD        1.02     HN        0.88     KP        1.03     
!   LA        1.01     MK        0.97     NL        0.96     OV        0.90     
!   SC        1.02     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.89     FD        0.96     HN        1.09     KP        1.06     
!   LA        1.05     MK        1.03     OV        0.89     PT        1.11     
!   SC        0.95     
! 
! 
! Fit before self-cal, rms=0.098055Jy  sigma=0.529143
! Fit after  self-cal, rms=0.074480Jy  sigma=0.432801
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.119 mas, bmaj=7.813 mas, bpa=-1.765 degrees
! Estimated noise=3.20104 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000370974 Jy
! Component: 100  -  total flux cleaned = -0.000185001 Jy
! Component: 150  -  total flux cleaned = -0.000187765 Jy
! Component: 200  -  total flux cleaned = -0.000155499 Jy
! Total flux subtracted in 200 components = -0.000155499 Jy
! Clean residual min=-0.005744 max=0.006373 Jy/beam
! Clean residual mean=0.000004 rms=0.001447 Jy/beam
! Combined flux in latest and established models = 0.428703 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 38 components and 0.428703 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.074405Jy  sigma=0.432472
! Fit after  self-cal, rms=0.074335Jy  sigma=0.432281
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.074335Jy  sigma=0.432281
! Fit after  self-cal, rms=0.074388Jy  sigma=0.432261
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.119 mas, bmaj=7.817 mas, bpa=-1.778 degrees
! Estimated noise=3.20152 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000139312 Jy
! Component: 100  -  total flux cleaned = -3.65283e-05 Jy
! Component: 150  -  total flux cleaned = 5.55097e-05 Jy
! Component: 200  -  total flux cleaned = 8.52026e-05 Jy
! Total flux subtracted in 200 components = 8.52026e-05 Jy
! Clean residual min=-0.005713 max=0.006319 Jy/beam
! Clean residual mean=0.000004 rms=0.001440 Jy/beam
! Combined flux in latest and established models = 0.428788 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 40 components and 0.428788 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.074352Jy  sigma=0.432063
! Fit after  self-cal, rms=0.074353Jy  sigma=0.432043
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-97.5, -61).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00555138 Jy
! Component: 100  -  total flux cleaned = 0.00770269 Jy
! Component: 150  -  total flux cleaned = 0.00861161 Jy
! Component: 200  -  total flux cleaned = 0.0092094 Jy
! Total flux subtracted in 200 components = 0.0092094 Jy
! Clean residual min=-0.005258 max=0.005315 Jy/beam
! Clean residual mean=0.000004 rms=0.001297 Jy/beam
! Combined flux in latest and established models = 0.437998 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 63 components and 0.437997 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.073908Jy  sigma=0.428414
! Fit after  self-cal, rms=0.073866Jy  sigma=0.428264
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.073866Jy  sigma=0.428264
! Fit after  self-cal, rms=0.073748Jy  sigma=0.428148
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.12 mas, bmaj=7.82 mas, bpa=-1.78 degrees
! Estimated noise=3.19722 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00128564 Jy
! Component: 100  -  total flux cleaned = 0.00141181 Jy
! Component: 150  -  total flux cleaned = 0.00158315 Jy
! Component: 200  -  total flux cleaned = 0.00168765 Jy
! Total flux subtracted in 200 components = 0.00168765 Jy
! Clean residual min=-0.005056 max=0.005323 Jy/beam
! Clean residual mean=0.000002 rms=0.001266 Jy/beam
! Combined flux in latest and established models = 0.439685 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 76 components and 0.439685 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.073641Jy  sigma=0.427542
! Fit after  self-cal, rms=0.073635Jy  sigma=0.427528
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000214748 Jy
! Component: 100  -  total flux cleaned = 0.000406879 Jy
! Component: 150  -  total flux cleaned = 0.000585312 Jy
! Component: 200  -  total flux cleaned = 0.000712594 Jy
! Total flux subtracted in 200 components = 0.000712594 Jy
! Clean residual min=-0.005001 max=0.005342 Jy/beam
! Clean residual mean=0.000002 rms=0.001258 Jy/beam
! Combined flux in latest and established models = 0.440398 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 82 components and 0.440398 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.073573Jy  sigma=0.427226
! Fit after  self-cal, rms=0.073573Jy  sigma=0.427221
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.073573Jy  sigma=0.427221
! Fit after  self-cal, rms=0.073518Jy  sigma=0.427187
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.905 mas, bmaj=13.87 mas, bpa=5.356 degrees
! Estimated noise=4.07195 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0011375 Jy
! Component: 100  -  total flux cleaned = 0.001335 Jy
! Component: 150  -  total flux cleaned = 0.00155582 Jy
! Component: 200  -  total flux cleaned = 0.0017438 Jy
! Total flux subtracted in 200 components = 0.0017438 Jy
! Clean residual min=-0.003984 max=0.004253 Jy/beam
! Clean residual mean=0.000001 rms=0.001332 Jy/beam
! Combined flux in latest and established models = 0.442142 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 87 components and 0.442142 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.073521Jy  sigma=0.427349
! Fit after  self-cal, rms=0.073498Jy  sigma=0.427215
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.2912e-06 Jy
! Component: 100  -  total flux cleaned = 7.51729e-05 Jy
! Component: 150  -  total flux cleaned = 0.000184111 Jy
! Component: 200  -  total flux cleaned = 0.000215212 Jy
! Total flux subtracted in 200 components = 0.000215212 Jy
! Clean residual min=-0.003986 max=0.004175 Jy/beam
! Clean residual mean=0.000001 rms=0.001302 Jy/beam
! Combined flux in latest and established models = 0.442357 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 96 components and 0.442357 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.073532Jy  sigma=0.427547
! Fit after  self-cal, rms=0.073518Jy  sigma=0.427416
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.12 mas, bmaj=7.819 mas, bpa=-1.781 degrees
! Estimated noise=3.1967 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.12 x 7.819 at -1.781 degrees (North through East)
! Clean map  min=-0.0047625  max=0.39617 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.706 mas, bmaj=6.95 mas, bpa=-2.54 degrees
! Estimated noise=3.66525 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.307707 Jy
! Component: 100  -  total flux cleaned = 0.375627 Jy
! Component: 150  -  total flux cleaned = 0.397853 Jy
! Component: 200  -  total flux cleaned = 0.408782 Jy
! Total flux subtracted in 200 components = 0.408782 Jy
! Clean residual min=-0.007303 max=0.009504 Jy/beam
! Clean residual mean=0.000015 rms=0.001780 Jy/beam
! Combined flux in latest and established models = 0.408782 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 0.408782 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.12 mas, bmaj=7.819 mas, bpa=-1.781 degrees
! Estimated noise=3.1967 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 10).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0107633 Jy
! Component: 100  -  total flux cleaned = 0.0172722 Jy
! Component: 150  -  total flux cleaned = 0.0216729 Jy
! Component: 200  -  total flux cleaned = 0.0247053 Jy
! Total flux subtracted in 200 components = 0.0247053 Jy
! Clean residual min=-0.005209 max=0.005338 Jy/beam
! Clean residual mean=0.000005 rms=0.001275 Jy/beam
! Combined flux in latest and established models = 0.433487 Jy
! Adding 37 model components to the UV plane model.
! The established model now contains 52 components and 0.433487 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.905 mas, bmaj=13.87 mas, bpa=5.356 degrees
! Estimated noise=4.07195 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00414445 Jy
! Component: 100  -  total flux cleaned = 0.00541324 Jy
! Component: 150  -  total flux cleaned = 0.00641413 Jy
! Component: 200  -  total flux cleaned = 0.00715336 Jy
! Total flux subtracted in 200 components = 0.00715336 Jy
! Clean residual min=-0.004346 max=0.004351 Jy/beam
! Clean residual mean=0.000001 rms=0.001283 Jy/beam
! Combined flux in latest and established models = 0.440641 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000506884 Jy
! Component: 100  -  total flux cleaned = 0.000839922 Jy
! Component: 150  -  total flux cleaned = 0.00113732 Jy
! Component: 200  -  total flux cleaned = 0.00136008 Jy
! Total flux subtracted in 200 components = 0.00136008 Jy
! Clean residual min=-0.004315 max=0.004362 Jy/beam
! Clean residual mean=-0.000000 rms=0.001251 Jy/beam
! Combined flux in latest and established models = 0.442001 Jy
! Adding 41 model components to the UV plane model.
! The established model now contains 89 components and 0.442001 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.12 mas, bmaj=7.819 mas, bpa=-1.781 degrees
! Estimated noise=3.1967 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000115242 Jy
! Component: 100  -  total flux cleaned = -0.000121577 Jy
! Component: 150  -  total flux cleaned = 3.28466e-05 Jy
! Component: 200  -  total flux cleaned = 0.000315237 Jy
! Total flux subtracted in 200 components = 0.000315237 Jy
! Clean residual min=-0.004881 max=0.005265 Jy/beam
! Clean residual mean=-0.000000 rms=0.001191 Jy/beam
! Combined flux in latest and established models = 0.442316 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 110 components and 0.442316 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.073247Jy  sigma=0.425990
! Fit after  self-cal, rms=0.073221Jy  sigma=0.425804
wmodel J0050-0929_S_h_map.mod
! Writing 110 model components to file: J0050-0929_S_h_map.mod
wobs   J0050-0929_S_h_uvs.fits
! Writing UV FITS file: J0050-0929_S_h_uvs.fits
wwins  J0050-0929_S_h_map.win
! wwins: Wrote 3 windows to J0050-0929_S_h_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000896821 Jy
! Component: 100  -  total flux cleaned = 0.000804783 Jy
! Component: 150  -  total flux cleaned = 0.00104898 Jy
! Component: 200  -  total flux cleaned = 0.00166193 Jy
! Component: 250  -  total flux cleaned = 0.00202649 Jy
! Component: 300  -  total flux cleaned = 0.00244859 Jy
! Component: 350  -  total flux cleaned = 0.00272018 Jy
! Component: 400  -  total flux cleaned = 0.00291634 Jy
! Component: 450  -  total flux cleaned = 0.00291703 Jy
! Component: 500  -  total flux cleaned = 0.00291746 Jy
! Component: 550  -  total flux cleaned = 0.00291789 Jy
! Component: 600  -  total flux cleaned = 0.00286069 Jy
! Component: 650  -  total flux cleaned = 0.00280367 Jy
! Component: 700  -  total flux cleaned = 0.00263626 Jy
! Component: 750  -  total flux cleaned = 0.00263603 Jy
! Component: 800  -  total flux cleaned = 0.00263618 Jy
! Component: 850  -  total flux cleaned = 0.00268905 Jy
! Component: 900  -  total flux cleaned = 0.00258729 Jy
! Component: 950  -  total flux cleaned = 0.00263671 Jy
! Component: 1000  -  total flux cleaned = 0.002588 Jy
! Component: 1050  -  total flux cleaned = 0.0025389 Jy
! Component: 1100  -  total flux cleaned = 0.00220292 Jy
! Component: 1150  -  total flux cleaned = 0.00220391 Jy
! Component: 1200  -  total flux cleaned = 0.00220324 Jy
! Component: 1250  -  total flux cleaned = 0.00211061 Jy
! Component: 1300  -  total flux cleaned = 0.00215656 Jy
! Component: 1350  -  total flux cleaned = 0.00202153 Jy
! Component: 1400  -  total flux cleaned = 0.00184507 Jy
! Component: 1450  -  total flux cleaned = 0.0017586 Jy
! Component: 1500  -  total flux cleaned = 0.00167353 Jy
! Component: 1550  -  total flux cleaned = 0.00167397 Jy
! Component: 1600  -  total flux cleaned = 0.00154794 Jy
! Component: 1650  -  total flux cleaned = 0.00163025 Jy
! Component: 1700  -  total flux cleaned = 0.00150707 Jy
! Component: 1750  -  total flux cleaned = 0.00146629 Jy
! Component: 1800  -  total flux cleaned = 0.00150643 Jy
! Component: 1850  -  total flux cleaned = 0.00146754 Jy
! Component: 1900  -  total flux cleaned = 0.00146818 Jy
! Component: 1950  -  total flux cleaned = 0.00142987 Jy
! Component: 2000  -  total flux cleaned = 0.00146785 Jy
! Component: 2050  -  total flux cleaned = 0.00142972 Jy
! Component: 2100  -  total flux cleaned = 0.0014297 Jy
! Component: 2150  -  total flux cleaned = 0.00150301 Jy
! Component: 2200  -  total flux cleaned = 0.00157544 Jy
! Component: 2250  -  total flux cleaned = 0.00143154 Jy
! Component: 2300  -  total flux cleaned = 0.00146776 Jy
! Component: 2350  -  total flux cleaned = 0.00150315 Jy
! Component: 2400  -  total flux cleaned = 0.00136331 Jy
! Component: 2450  -  total flux cleaned = 0.00136359 Jy
! Component: 2500  -  total flux cleaned = 0.00139787 Jy
! Component: 2550  -  total flux cleaned = 0.00126252 Jy
! Component: 2600  -  total flux cleaned = 0.00133 Jy
! Component: 2650  -  total flux cleaned = 0.00133 Jy
! Component: 2700  -  total flux cleaned = 0.00139538 Jy
! Component: 2750  -  total flux cleaned = 0.00129692 Jy
! Component: 2800  -  total flux cleaned = 0.00123255 Jy
! Component: 2850  -  total flux cleaned = 0.00113628 Jy
! Component: 2900  -  total flux cleaned = 0.00113641 Jy
! Component: 2950  -  total flux cleaned = 0.00119938 Jy
! Component: 3000  -  total flux cleaned = 0.00110601 Jy
! Component: 3050  -  total flux cleaned = 0.00116811 Jy
! Component: 3100  -  total flux cleaned = 0.00125965 Jy
! Component: 3150  -  total flux cleaned = 0.0012597 Jy
! Component: 3200  -  total flux cleaned = 0.00137987 Jy
! Component: 3250  -  total flux cleaned = 0.0015591 Jy
! Component: 3300  -  total flux cleaned = 0.00146999 Jy
! Component: 3350  -  total flux cleaned = 0.00155854 Jy
! Component: 3400  -  total flux cleaned = 0.00173405 Jy
! Component: 3450  -  total flux cleaned = 0.00179201 Jy
! Component: 3500  -  total flux cleaned = 0.00184997 Jy
! Component: 3550  -  total flux cleaned = 0.00205053 Jy
! Component: 3600  -  total flux cleaned = 0.00210733 Jy
! Component: 3650  -  total flux cleaned = 0.00224859 Jy
! Component: 3700  -  total flux cleaned = 0.0022485 Jy
! Component: 3750  -  total flux cleaned = 0.00230399 Jy
! Component: 3800  -  total flux cleaned = 0.00222093 Jy
! Component: 3850  -  total flux cleaned = 0.0022761 Jy
! Component: 3900  -  total flux cleaned = 0.00238577 Jy
! Component: 3950  -  total flux cleaned = 0.00252193 Jy
! Component: 4000  -  total flux cleaned = 0.00246772 Jy
! Component: 4050  -  total flux cleaned = 0.00252159 Jy
! Total flux subtracted in 4096 components = 0.00257531 Jy
! Clean residual min=-0.001598 max=0.001884 Jy/beam
! Clean residual mean=0.000002 rms=0.000479 Jy/beam
! Combined flux in latest and established models = 0.444891 Jy
keep
! Adding 247 model components to the UV plane model.
! The established model now contains 357 components and 0.444891 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J0050-0929_S_h_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.12 x 7.819 at -1.781 degrees (North through East)
! Clean map  min=-0.0034321  max=0.39737 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J0050-0929_S_h_map.fits
wmodel /image_prod/ug002_uva//J0050-0929_S_h_map.mod
! Writing 357 model components to file: /image_prod/ug002_uva//J0050-0929_S_h_map.mod
wobs   /image_prod/ug002_uva//J0050-0929_S_h_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J0050-0929_S_h_uvs.fits
wwins  /image_prod/ug002_uva//J0050-0929_S_h_map.win
! wwins: Wrote 4 windows to /image_prod/ug002_uva//J0050-0929_S_h_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.397373 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000469002 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.354076 0.354076 0.708153 1.41631 2.83261 5.66522 11.3304 22.6609 45.3218 90.6436
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0014 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.397 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  847.274 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J0050-0929_S_h_dfm.log closed on Wed Mar  4 18:41:01 2020