! Started logfile: /image_prod/ug002_uva//J0050-0929_S_a_dfm.log on Wed Mar  4 18:40:25 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J0050-0929_S_a_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J0050-0929_S_a_uva.fits
! AN table 1: 6 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.87037 visibilities/baseline/integration-bin.
! Found source: J0050-0929
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 564 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0050-0929_S_a]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.069261Jy  sigma=11.835515
! Fit after  self-cal, rms=0.564173Jy  sigma=6.201744
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.163 mas, bmaj=15.13 mas, bpa=-23.08 degrees
! Estimated noise=3.40181 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.350038 Jy
! Component: 100  -  total flux cleaned = 0.429337 Jy
! Total flux subtracted in 100 components = 0.429337 Jy
! Clean residual min=-0.022862 max=0.034575 Jy/beam
! Clean residual mean=-0.000061 rms=0.006943 Jy/beam
! Combined flux in latest and established models = 0.429337 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.429337 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.096120Jy  sigma=0.993791
! Fit after  self-cal, rms=0.096131Jy  sigma=0.993745
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.781 mas, bmaj=16.45 mas, bpa=-22.2 degrees
! Estimated noise=2.78944 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0295046 Jy
! Component: 100  -  total flux cleaned = 0.0427853 Jy
! Component: 150  -  total flux cleaned = 0.0465762 Jy
! Component: 200  -  total flux cleaned = 0.0479815 Jy
! Total flux subtracted in 200 components = 0.0479815 Jy
! Clean residual min=-0.020068 max=0.018279 Jy/beam
! Clean residual mean=-0.000106 rms=0.004883 Jy/beam
! Combined flux in latest and established models = 0.477318 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 45 components and 0.477318 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.087805Jy  sigma=0.881778
! Fit after  self-cal, rms=0.087765Jy  sigma=0.881436
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.781 x 16.45 at -22.2 degrees (North through East)
! Clean map  min=-0.019606  max=0.44879 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.91     FD        0.90     HN        1.01     KP        1.03     
!   LA        1.07     MK        1.03     NL        0.95     OV        0.97     
!   PT        1.04     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.37     FD        0.88     HN        1.04     KP        1.04     
!   LA        1.07     MK        0.96     NL        0.94     OV        0.93     
!   PT        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.22     FD        0.92     HN        0.97     KP        1.03     
!   LA        1.05     MK        1.03     NL        0.92     OV        0.95     
!   PT        1.02     
! 
! 
! Fit before self-cal, rms=0.087765Jy  sigma=0.881436
! Fit after  self-cal, rms=0.077770Jy  sigma=0.737312
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.781 mas, bmaj=16.81 mas, bpa=-22.19 degrees
! Estimated noise=2.77964 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00178626 Jy
! Component: 100  -  total flux cleaned = -0.00181108 Jy
! Component: 150  -  total flux cleaned = -0.00130062 Jy
! Component: 200  -  total flux cleaned = -0.00130601 Jy
! Total flux subtracted in 200 components = -0.00130601 Jy
! Clean residual min=-0.009191 max=0.010239 Jy/beam
! Clean residual mean=-0.000045 rms=0.002478 Jy/beam
! Combined flux in latest and established models = 0.476012 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 61 components and 0.476012 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077135Jy  sigma=0.729930
! Fit after  self-cal, rms=0.077204Jy  sigma=0.729662
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077204Jy  sigma=0.729662
! Fit after  self-cal, rms=0.077317Jy  sigma=0.728308
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.781 mas, bmaj=16.86 mas, bpa=-22.17 degrees
! Estimated noise=2.77441 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00162659 Jy
! Component: 100  -  total flux cleaned = -0.00162878 Jy
! Component: 150  -  total flux cleaned = -0.00172527 Jy
! Component: 200  -  total flux cleaned = -0.00172747 Jy
! Total flux subtracted in 200 components = -0.00172747 Jy
! Clean residual min=-0.008725 max=0.010294 Jy/beam
! Clean residual mean=-0.000042 rms=0.002356 Jy/beam
! Combined flux in latest and established models = 0.474285 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 68 components and 0.474285 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.076966Jy  sigma=0.724928
! Fit after  self-cal, rms=0.076961Jy  sigma=0.724904
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-90, -32).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00685556 Jy
! Component: 100  -  total flux cleaned = 0.00964304 Jy
! Component: 150  -  total flux cleaned = 0.011131 Jy
! Component: 200  -  total flux cleaned = 0.0127126 Jy
! Total flux subtracted in 200 components = 0.0127126 Jy
! Clean residual min=-0.007532 max=0.007517 Jy/beam
! Clean residual mean=-0.000040 rms=0.001894 Jy/beam
! Combined flux in latest and established models = 0.486997 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 96 components and 0.486997 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.075271Jy  sigma=0.707807
! Fit after  self-cal, rms=0.075232Jy  sigma=0.707351
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.075232Jy  sigma=0.707351
! Fit after  self-cal, rms=0.075135Jy  sigma=0.705483
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.789 mas, bmaj=16.9 mas, bpa=-22.15 degrees
! Estimated noise=2.76428 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00165928 Jy
! Component: 100  -  total flux cleaned = 0.00289406 Jy
! Component: 150  -  total flux cleaned = 0.00383196 Jy
! Component: 200  -  total flux cleaned = 0.00425336 Jy
! Total flux subtracted in 200 components = 0.00425336 Jy
! Clean residual min=-0.006343 max=0.006974 Jy/beam
! Clean residual mean=-0.000030 rms=0.001658 Jy/beam
! Combined flux in latest and established models = 0.49125 Jy
selfcal
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 117 components and 0.49125 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.074688Jy  sigma=0.700502
! Fit after  self-cal, rms=0.074697Jy  sigma=0.700359
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (39.5, 67).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00468698 Jy
! Component: 100  -  total flux cleaned = 0.00573254 Jy
! Component: 150  -  total flux cleaned = 0.00742955 Jy
! Component: 200  -  total flux cleaned = 0.00847949 Jy
! Total flux subtracted in 200 components = 0.00847949 Jy
! Clean residual min=-0.005385 max=0.005000 Jy/beam
! Clean residual mean=-0.000023 rms=0.001327 Jy/beam
! Combined flux in latest and established models = 0.49973 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 132 components and 0.49973 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.073763Jy  sigma=0.691275
! Fit after  self-cal, rms=0.073712Jy  sigma=0.690939
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.073712Jy  sigma=0.690939
! Fit after  self-cal, rms=0.073829Jy  sigma=0.690508
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.47 mas, bmaj=18.98 mas, bpa=-18.01 degrees
! Estimated noise=3.21511 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00269099 Jy
! Component: 100  -  total flux cleaned = 0.00472257 Jy
! Component: 150  -  total flux cleaned = 0.00573347 Jy
! Component: 200  -  total flux cleaned = 0.00679794 Jy
! Total flux subtracted in 200 components = 0.00679794 Jy
! Clean residual min=-0.004606 max=0.005704 Jy/beam
! Clean residual mean=-0.000029 rms=0.001419 Jy/beam
! Combined flux in latest and established models = 0.506528 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 147 components and 0.506528 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.073687Jy  sigma=0.687975
! Fit after  self-cal, rms=0.073682Jy  sigma=0.687889
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000636262 Jy
! Component: 100  -  total flux cleaned = 0.00149452 Jy
! Component: 150  -  total flux cleaned = 0.00216224 Jy
! Component: 200  -  total flux cleaned = 0.00285368 Jy
! Total flux subtracted in 200 components = 0.00285368 Jy
! Clean residual min=-0.004457 max=0.005286 Jy/beam
! Clean residual mean=-0.000028 rms=0.001319 Jy/beam
! Combined flux in latest and established models = 0.509381 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 164 components and 0.509381 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.073574Jy  sigma=0.686830
! Fit after  self-cal, rms=0.073569Jy  sigma=0.686809
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.792 mas, bmaj=16.93 mas, bpa=-22.13 degrees
! Estimated noise=2.7615 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.792 x 16.93 at -22.13 degrees (North through East)
! Clean map  min=-0.0048406  max=0.44501 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.175 mas, bmaj=15.58 mas, bpa=-22.97 degrees
! Estimated noise=3.37278 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.347022 Jy
! Component: 100  -  total flux cleaned = 0.422865 Jy
! Component: 150  -  total flux cleaned = 0.446482 Jy
! Component: 200  -  total flux cleaned = 0.457961 Jy
! Total flux subtracted in 200 components = 0.457961 Jy
! Clean residual min=-0.012159 max=0.011962 Jy/beam
! Clean residual mean=-0.000016 rms=0.003368 Jy/beam
! Combined flux in latest and established models = 0.457961 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 25 model components to the UV plane model.
! The established model now contains 25 components and 0.457961 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.792 mas, bmaj=16.93 mas, bpa=-22.13 degrees
! Estimated noise=2.7615 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0094329 Jy
! Component: 100  -  total flux cleaned = 0.0142154 Jy
! Component: 150  -  total flux cleaned = 0.0187722 Jy
! Component: 200  -  total flux cleaned = 0.0222871 Jy
! Total flux subtracted in 200 components = 0.0222871 Jy
! Clean residual min=-0.007593 max=0.007051 Jy/beam
! Clean residual mean=-0.000025 rms=0.001882 Jy/beam
! Combined flux in latest and established models = 0.480248 Jy
! Adding 43 model components to the UV plane model.
! The established model now contains 68 components and 0.480248 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.47 mas, bmaj=18.98 mas, bpa=-18.01 degrees
! Estimated noise=3.21511 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00636355 Jy
! Component: 100  -  total flux cleaned = 0.00993593 Jy
! Component: 150  -  total flux cleaned = 0.0113574 Jy
! Component: 200  -  total flux cleaned = 0.0132243 Jy
! Total flux subtracted in 200 components = 0.0132243 Jy
! Clean residual min=-0.006203 max=0.005779 Jy/beam
! Clean residual mean=-0.000037 rms=0.001650 Jy/beam
! Combined flux in latest and established models = 0.493473 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00139273 Jy
! Component: 100  -  total flux cleaned = 0.00282761 Jy
! Component: 150  -  total flux cleaned = 0.00423268 Jy
! Component: 200  -  total flux cleaned = 0.0054494 Jy
! Total flux subtracted in 200 components = 0.0054494 Jy
! Clean residual min=-0.005574 max=0.005181 Jy/beam
! Clean residual mean=-0.000033 rms=0.001458 Jy/beam
! Combined flux in latest and established models = 0.498922 Jy
! Adding 47 model components to the UV plane model.
! The established model now contains 110 components and 0.498922 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.792 mas, bmaj=16.93 mas, bpa=-22.13 degrees
! Estimated noise=2.7615 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00199137 Jy
! Component: 100  -  total flux cleaned = 0.00326748 Jy
! Component: 150  -  total flux cleaned = 0.00381955 Jy
! Component: 200  -  total flux cleaned = 0.00458608 Jy
! Total flux subtracted in 200 components = 0.00458608 Jy
! Clean residual min=-0.005489 max=0.004794 Jy/beam
! Clean residual mean=-0.000020 rms=0.001263 Jy/beam
! Combined flux in latest and established models = 0.503508 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 141 components and 0.503508 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.074118Jy  sigma=0.691349
! Fit after  self-cal, rms=0.074086Jy  sigma=0.691111
wmodel J0050-0929_S_a_map.mod
! Writing 141 model components to file: J0050-0929_S_a_map.mod
wobs   J0050-0929_S_a_uvs.fits
! Writing UV FITS file: J0050-0929_S_a_uvs.fits
wwins  J0050-0929_S_a_map.win
! wwins: Wrote 3 windows to J0050-0929_S_a_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00227676 Jy
! Component: 100  -  total flux cleaned = -0.00342421 Jy
! Component: 150  -  total flux cleaned = -0.00395062 Jy
! Component: 200  -  total flux cleaned = -0.00423352 Jy
! Component: 250  -  total flux cleaned = -0.00449792 Jy
! Component: 300  -  total flux cleaned = -0.00449822 Jy
! Component: 350  -  total flux cleaned = -0.00462032 Jy
! Component: 400  -  total flux cleaned = -0.00490984 Jy
! Component: 450  -  total flux cleaned = -0.00529373 Jy
! Component: 500  -  total flux cleaned = -0.00534595 Jy
! Component: 550  -  total flux cleaned = -0.00539641 Jy
! Component: 600  -  total flux cleaned = -0.00524821 Jy
! Component: 650  -  total flux cleaned = -0.00505754 Jy
! Component: 700  -  total flux cleaned = -0.0048719 Jy
! Component: 750  -  total flux cleaned = -0.00478143 Jy
! Component: 800  -  total flux cleaned = -0.00473697 Jy
! Component: 850  -  total flux cleaned = -0.00465102 Jy
! Component: 900  -  total flux cleaned = -0.00448158 Jy
! Component: 950  -  total flux cleaned = -0.00435663 Jy
! Component: 1000  -  total flux cleaned = -0.00419308 Jy
! Component: 1050  -  total flux cleaned = -0.00403237 Jy
! Component: 1100  -  total flux cleaned = -0.00403271 Jy
! Component: 1150  -  total flux cleaned = -0.00391466 Jy
! Component: 1200  -  total flux cleaned = -0.0037216 Jy
! Component: 1250  -  total flux cleaned = -0.00353162 Jy
! Component: 1300  -  total flux cleaned = -0.00353241 Jy
! Component: 1350  -  total flux cleaned = -0.00345802 Jy
! Component: 1400  -  total flux cleaned = -0.00345762 Jy
! Component: 1450  -  total flux cleaned = -0.00327635 Jy
! Component: 1500  -  total flux cleaned = -0.00316982 Jy
! Component: 1550  -  total flux cleaned = -0.00316998 Jy
! Component: 1600  -  total flux cleaned = -0.00313474 Jy
! Component: 1650  -  total flux cleaned = -0.0030308 Jy
! Component: 1700  -  total flux cleaned = -0.00296175 Jy
! Component: 1750  -  total flux cleaned = -0.00282579 Jy
! Component: 1800  -  total flux cleaned = -0.00282603 Jy
! Component: 1850  -  total flux cleaned = -0.00275955 Jy
! Component: 1900  -  total flux cleaned = -0.0027267 Jy
! Component: 1950  -  total flux cleaned = -0.00272673 Jy
! Component: 2000  -  total flux cleaned = -0.00275929 Jy
! Component: 2050  -  total flux cleaned = -0.00275919 Jy
! Component: 2100  -  total flux cleaned = -0.00272694 Jy
! Component: 2150  -  total flux cleaned = -0.00282281 Jy
! Component: 2200  -  total flux cleaned = -0.00279107 Jy
! Component: 2250  -  total flux cleaned = -0.00285437 Jy
! Component: 2300  -  total flux cleaned = -0.00282299 Jy
! Component: 2350  -  total flux cleaned = -0.00285443 Jy
! Component: 2400  -  total flux cleaned = -0.00291624 Jy
! Component: 2450  -  total flux cleaned = -0.00291616 Jy
! Component: 2500  -  total flux cleaned = -0.00291608 Jy
! Component: 2550  -  total flux cleaned = -0.00294659 Jy
! Component: 2600  -  total flux cleaned = -0.00294648 Jy
! Component: 2650  -  total flux cleaned = -0.00291619 Jy
! Component: 2700  -  total flux cleaned = -0.00291616 Jy
! Component: 2750  -  total flux cleaned = -0.00300608 Jy
! Component: 2800  -  total flux cleaned = -0.00312564 Jy
! Component: 2850  -  total flux cleaned = -0.00315545 Jy
! Component: 2900  -  total flux cleaned = -0.00324478 Jy
! Component: 2950  -  total flux cleaned = -0.00342322 Jy
! Component: 3000  -  total flux cleaned = -0.00366091 Jy
! Component: 3050  -  total flux cleaned = -0.00383928 Jy
! Component: 3100  -  total flux cleaned = -0.0040477 Jy
! Component: 3150  -  total flux cleaned = -0.00422687 Jy
! Component: 3200  -  total flux cleaned = -0.00440685 Jy
! Component: 3250  -  total flux cleaned = -0.00464786 Jy
! Component: 3300  -  total flux cleaned = -0.00482972 Jy
! Component: 3350  -  total flux cleaned = -0.00501269 Jy
! Component: 3400  -  total flux cleaned = -0.00513499 Jy
! Component: 3450  -  total flux cleaned = -0.00532041 Jy
! Component: 3500  -  total flux cleaned = -0.00541386 Jy
! Component: 3550  -  total flux cleaned = -0.00550779 Jy
! Component: 3600  -  total flux cleaned = -0.00566613 Jy
! Component: 3650  -  total flux cleaned = -0.0057621 Jy
! Component: 3700  -  total flux cleaned = -0.00585912 Jy
! Component: 3750  -  total flux cleaned = -0.00598937 Jy
! Component: 3800  -  total flux cleaned = -0.00608823 Jy
! Component: 3850  -  total flux cleaned = -0.00618777 Jy
! Component: 3900  -  total flux cleaned = -0.00628833 Jy
! Component: 3950  -  total flux cleaned = -0.0063897 Jy
! Component: 4000  -  total flux cleaned = -0.00649237 Jy
! Component: 4050  -  total flux cleaned = -0.00666491 Jy
! Total flux subtracted in 4096 components = -0.00673479 Jy
! Clean residual min=-0.001937 max=0.001966 Jy/beam
! Clean residual mean=-0.000004 rms=0.000595 Jy/beam
! Combined flux in latest and established models = 0.496773 Jy
keep
! Adding 215 model components to the UV plane model.
! The established model now contains 356 components and 0.496774 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J0050-0929_S_a_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.792 x 16.93 at -22.13 degrees (North through East)
! Clean map  min=-0.0043917  max=0.44345 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J0050-0929_S_a_map.fits
wmodel /image_prod/ug002_uva//J0050-0929_S_a_map.mod
! Writing 356 model components to file: /image_prod/ug002_uva//J0050-0929_S_a_map.mod
wobs   /image_prod/ug002_uva//J0050-0929_S_a_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J0050-0929_S_a_uvs.fits
wwins  /image_prod/ug002_uva//J0050-0929_S_a_map.win
! wwins: Wrote 4 windows to /image_prod/ug002_uva//J0050-0929_S_a_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.443449 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000597764 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.404396 0.404396 0.808792 1.61758 3.23517 6.47034 12.9407 25.8813 51.7627
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0017 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.443 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  741.847 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J0050-0929_S_a_dfm.log closed on Wed Mar  4 18:40:29 2020