! Started logfile: /image_prod/ug002_uva//J0048+0640_S_dfm.log on Wed Mar  4 18:39:28 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J0048+0640_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J0048+0640_S_uva.fits
! AN table 1: 90 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.991667 visibilities/baseline/integration-bin.
! Found source: J0048+0640
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 9639 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0048+0640_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=1.036446Jy  sigma=8.554038
! Fit after  self-cal, rms=0.776567Jy  sigma=6.467259
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.007 mas, bmaj=13.06 mas, bpa=-18.69 degrees
! Estimated noise=1.36702 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.172365 Jy
! Component: 100  -  total flux cleaned = 0.244467 Jy
! Total flux subtracted in 100 components = 0.244467 Jy
! Clean residual min=-0.014800 max=0.031227 Jy/beam
! Clean residual mean=0.000000 rms=0.003452 Jy/beam
! Combined flux in latest and established models = 0.244467 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.244467 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.083035Jy  sigma=0.635660
! Fit after  self-cal, rms=0.081358Jy  sigma=0.618399
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0357288 Jy
! Component: 100  -  total flux cleaned = 0.051875 Jy
! Total flux subtracted in 100 components = 0.051875 Jy
! Clean residual min=-0.006466 max=0.007150 Jy/beam
! Clean residual mean=0.000004 rms=0.001342 Jy/beam
! Combined flux in latest and established models = 0.296342 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 14 components and 0.296342 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063107Jy  sigma=0.470331
! Fit after  self-cal, rms=0.062815Jy  sigma=0.467577
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00688934 Jy
! Component: 100  -  total flux cleaned = 0.00811065 Jy
! Total flux subtracted in 100 components = 0.00811065 Jy
! Clean residual min=-0.004722 max=0.003998 Jy/beam
! Clean residual mean=0.000004 rms=0.001013 Jy/beam
! Combined flux in latest and established models = 0.304453 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 22 components and 0.304453 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061410Jy  sigma=0.458698
! Fit after  self-cal, rms=0.061378Jy  sigma=0.458507
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.617 mas, bmaj=13.28 mas, bpa=-18.1 degrees
! Estimated noise=0.891905 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00192946 Jy
! Component: 100  -  total flux cleaned = -0.00265907 Jy
! Component: 150  -  total flux cleaned = -0.0034721 Jy
! Component: 200  -  total flux cleaned = -0.00426809 Jy
! Total flux subtracted in 200 components = -0.00426809 Jy
! Clean residual min=-0.004295 max=0.003607 Jy/beam
! Clean residual mean=0.000007 rms=0.000892 Jy/beam
! Combined flux in latest and established models = 0.300185 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 48 components and 0.300185 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060870Jy  sigma=0.455064
! Fit after  self-cal, rms=0.060853Jy  sigma=0.455037
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.617 x 13.28 at -18.1 degrees (North through East)
! Clean map  min=-0.006944  max=0.21762 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.04     KP        1.00     
!   LA        1.04     MK        0.99     NL        0.97     OV        0.99     
!   PT        1.03     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.99     HN        1.04     KP        1.01     
!   LA        1.04     MK        0.98     NL        0.90     OV        0.97     
!   PT        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.00     HN        1.02     KP        1.01     
!   LA        1.04     MK        0.97     NL        0.93     OV        1.01     
!   PT        1.01     
! 
! 
! Fit before self-cal, rms=0.060853Jy  sigma=0.455037
! Fit after  self-cal, rms=0.058155Jy  sigma=0.445187
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.606 mas, bmaj=13.2 mas, bpa=-18.17 degrees
! Estimated noise=0.886082 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-3, -12.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00220412 Jy
! Component: 100  -  total flux cleaned = 0.00287104 Jy
! Component: 150  -  total flux cleaned = 0.00301969 Jy
! Component: 200  -  total flux cleaned = 0.0031527 Jy
! Total flux subtracted in 200 components = 0.0031527 Jy
! Clean residual min=-0.001834 max=0.002223 Jy/beam
! Clean residual mean=0.000006 rms=0.000513 Jy/beam
! Combined flux in latest and established models = 0.303337 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 69 components and 0.303337 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057989Jy  sigma=0.444009
! Fit after  self-cal, rms=0.057989Jy  sigma=0.443943
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057989Jy  sigma=0.443943
! Fit after  self-cal, rms=0.056423Jy  sigma=0.437373
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.611 mas, bmaj=13.18 mas, bpa=-18.14 degrees
! Estimated noise=0.886842 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00143514 Jy
! Component: 100  -  total flux cleaned = 0.00181074 Jy
! Component: 150  -  total flux cleaned = 0.00181236 Jy
! Component: 200  -  total flux cleaned = 0.0017461 Jy
! Total flux subtracted in 200 components = 0.0017461 Jy
! Clean residual min=-0.001445 max=0.001602 Jy/beam
! Clean residual mean=0.000004 rms=0.000367 Jy/beam
! Combined flux in latest and established models = 0.305084 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 85 components and 0.305084 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.056373Jy  sigma=0.437054
! Fit after  self-cal, rms=0.056368Jy  sigma=0.437041
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (37.5, -110).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000604539 Jy
! Component: 100  -  total flux cleaned = 0.00060342 Jy
! Component: 150  -  total flux cleaned = 0.000632247 Jy
! Component: 200  -  total flux cleaned = 0.000656933 Jy
! Total flux subtracted in 200 components = 0.000656933 Jy
! Clean residual min=-0.001427 max=0.001414 Jy/beam
! Clean residual mean=0.000004 rms=0.000343 Jy/beam
! Combined flux in latest and established models = 0.305741 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 113 components and 0.30574 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.056321Jy  sigma=0.436695
! Fit after  self-cal, rms=0.056318Jy  sigma=0.436681
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.056318Jy  sigma=0.436681
! Fit after  self-cal, rms=0.056183Jy  sigma=0.436182
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.61 mas, bmaj=13.17 mas, bpa=-18.15 degrees
! Estimated noise=0.886978 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000723687 Jy
! Component: 100  -  total flux cleaned = 0.0010021 Jy
! Component: 150  -  total flux cleaned = 0.00120052 Jy
! Component: 200  -  total flux cleaned = 0.00127256 Jy
! Total flux subtracted in 200 components = 0.00127256 Jy
! Clean residual min=-0.001309 max=0.001255 Jy/beam
! Clean residual mean=0.000003 rms=0.000318 Jy/beam
! Combined flux in latest and established models = 0.307013 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 129 components and 0.307013 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.056164Jy  sigma=0.436052
! Fit after  self-cal, rms=0.056163Jy  sigma=0.436049
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000108635 Jy
! Component: 100  -  total flux cleaned = 0.00012455 Jy
! Component: 150  -  total flux cleaned = 9.34396e-05 Jy
! Component: 200  -  total flux cleaned = 6.37854e-05 Jy
! Total flux subtracted in 200 components = 6.37854e-05 Jy
! Clean residual min=-0.001288 max=0.001228 Jy/beam
! Clean residual mean=0.000003 rms=0.000314 Jy/beam
! Combined flux in latest and established models = 0.307077 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 148 components and 0.307077 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.056154Jy  sigma=0.435995
! Fit after  self-cal, rms=0.056154Jy  sigma=0.435995
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.056154Jy  sigma=0.435995
! Fit after  self-cal, rms=0.056139Jy  sigma=0.435973
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.843 mas, bmaj=13.51 mas, bpa=-13.35 degrees
! Estimated noise=1.04585 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000160745 Jy
! Component: 100  -  total flux cleaned = 0.000175517 Jy
! Component: 150  -  total flux cleaned = 0.000190211 Jy
! Component: 200  -  total flux cleaned = 0.000162839 Jy
! Total flux subtracted in 200 components = 0.000162839 Jy
! Clean residual min=-0.001214 max=0.001074 Jy/beam
! Clean residual mean=0.000005 rms=0.000333 Jy/beam
! Combined flux in latest and established models = 0.30724 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 175 components and 0.30724 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.056132Jy  sigma=0.435926
! Fit after  self-cal, rms=0.056132Jy  sigma=0.435923
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.23204e-05 Jy
! Component: 100  -  total flux cleaned = 9.79685e-06 Jy
! Component: 150  -  total flux cleaned = 9.94554e-06 Jy
! Component: 200  -  total flux cleaned = -1.26443e-06 Jy
! Total flux subtracted in 200 components = -1.26443e-06 Jy
! Clean residual min=-0.001186 max=0.001040 Jy/beam
! Clean residual mean=0.000006 rms=0.000327 Jy/beam
! Combined flux in latest and established models = 0.307238 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 187 components and 0.307238 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.056128Jy  sigma=0.435906
! Fit after  self-cal, rms=0.056128Jy  sigma=0.435906
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.608 mas, bmaj=13.17 mas, bpa=-18.16 degrees
! Estimated noise=0.887285 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.608 x 13.17 at -18.16 degrees (North through East)
! Clean map  min=-0.0018368  max=0.21624 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3 mas, bmaj=12.98 mas, bpa=-18.76 degrees
! Estimated noise=1.355 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.172668 Jy
! Component: 100  -  total flux cleaned = 0.246474 Jy
! Component: 150  -  total flux cleaned = 0.279903 Jy
! Component: 200  -  total flux cleaned = 0.295175 Jy
! Total flux subtracted in 200 components = 0.295175 Jy
! Clean residual min=-0.002756 max=0.006646 Jy/beam
! Clean residual mean=0.000001 rms=0.000836 Jy/beam
! Combined flux in latest and established models = 0.295175 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.295175 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.608 mas, bmaj=13.17 mas, bpa=-18.16 degrees
! Estimated noise=0.887285 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00849295 Jy
! Component: 100  -  total flux cleaned = 0.0123096 Jy
! Component: 150  -  total flux cleaned = 0.0139582 Jy
! Component: 200  -  total flux cleaned = 0.0144209 Jy
! Total flux subtracted in 200 components = 0.0144209 Jy
! Clean residual min=-0.001447 max=0.001388 Jy/beam
! Clean residual mean=0.000003 rms=0.000376 Jy/beam
! Combined flux in latest and established models = 0.309596 Jy
! Adding 29 model components to the UV plane model.
! The established model now contains 36 components and 0.309596 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.843 mas, bmaj=13.51 mas, bpa=-13.35 degrees
! Estimated noise=1.04585 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.44659e-05 Jy
! Component: 100  -  total flux cleaned = -0.000319869 Jy
! Component: 150  -  total flux cleaned = -0.000439397 Jy
! Component: 200  -  total flux cleaned = -0.00054532 Jy
! Total flux subtracted in 200 components = -0.00054532 Jy
! Clean residual min=-0.001327 max=0.001173 Jy/beam
! Clean residual mean=0.000006 rms=0.000359 Jy/beam
! Combined flux in latest and established models = 0.309051 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.32739e-05 Jy
! Component: 100  -  total flux cleaned = -0.000209146 Jy
! Component: 150  -  total flux cleaned = -0.000315584 Jy
! Component: 200  -  total flux cleaned = -0.000396373 Jy
! Total flux subtracted in 200 components = -0.000396373 Jy
! Clean residual min=-0.001281 max=0.001151 Jy/beam
! Clean residual mean=0.000006 rms=0.000349 Jy/beam
! Combined flux in latest and established models = 0.308655 Jy
! Adding 61 model components to the UV plane model.
! The established model now contains 93 components and 0.308655 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.608 mas, bmaj=13.17 mas, bpa=-18.16 degrees
! Estimated noise=0.887285 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000215976 Jy
! Component: 100  -  total flux cleaned = -0.000470684 Jy
! Component: 150  -  total flux cleaned = -0.000535756 Jy
! Component: 200  -  total flux cleaned = -0.000565591 Jy
! Total flux subtracted in 200 components = -0.000565591 Jy
! Clean residual min=-0.001372 max=0.001257 Jy/beam
! Clean residual mean=0.000003 rms=0.000334 Jy/beam
! Combined flux in latest and established models = 0.308089 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 118 components and 0.308089 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.056197Jy  sigma=0.436371
! Fit after  self-cal, rms=0.056195Jy  sigma=0.436347
wmodel J0048+0640_S_map.mod
! Writing 118 model components to file: J0048+0640_S_map.mod
wobs   J0048+0640_S_uvs.fits
! Writing UV FITS file: J0048+0640_S_uvs.fits
wwins  J0048+0640_S_map.win
! wwins: Wrote 3 windows to J0048+0640_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000316298 Jy
! Component: 100  -  total flux cleaned = -0.000648965 Jy
! Component: 150  -  total flux cleaned = -0.000924459 Jy
! Component: 200  -  total flux cleaned = -0.00112885 Jy
! Component: 250  -  total flux cleaned = -0.00140509 Jy
! Component: 300  -  total flux cleaned = -0.00159602 Jy
! Component: 350  -  total flux cleaned = -0.00178217 Jy
! Component: 400  -  total flux cleaned = -0.00198116 Jy
! Component: 450  -  total flux cleaned = -0.00217512 Jy
! Component: 500  -  total flux cleaned = -0.00233048 Jy
! Component: 550  -  total flux cleaned = -0.00246603 Jy
! Component: 600  -  total flux cleaned = -0.00259925 Jy
! Component: 650  -  total flux cleaned = -0.00272993 Jy
! Component: 700  -  total flux cleaned = -0.00285838 Jy
! Component: 750  -  total flux cleaned = -0.00290606 Jy
! Component: 800  -  total flux cleaned = -0.00304615 Jy
! Component: 850  -  total flux cleaned = -0.00309192 Jy
! Component: 900  -  total flux cleaned = -0.00313727 Jy
! Component: 950  -  total flux cleaned = -0.00318236 Jy
! Component: 1000  -  total flux cleaned = -0.00328509 Jy
! Component: 1050  -  total flux cleaned = -0.00328498 Jy
! Component: 1100  -  total flux cleaned = -0.00331357 Jy
! Component: 1150  -  total flux cleaned = -0.00342622 Jy
! Component: 1200  -  total flux cleaned = -0.00349554 Jy
! Component: 1250  -  total flux cleaned = -0.00353679 Jy
! Component: 1300  -  total flux cleaned = -0.00367241 Jy
! Component: 1350  -  total flux cleaned = -0.00369901 Jy
! Component: 1400  -  total flux cleaned = -0.00377851 Jy
! Component: 1450  -  total flux cleaned = -0.00386995 Jy
! Component: 1500  -  total flux cleaned = -0.00390845 Jy
! Component: 1550  -  total flux cleaned = -0.00397238 Jy
! Component: 1600  -  total flux cleaned = -0.00403556 Jy
! Component: 1650  -  total flux cleaned = -0.00412308 Jy
! Component: 1700  -  total flux cleaned = -0.00420972 Jy
! Component: 1750  -  total flux cleaned = -0.00423435 Jy
! Component: 1800  -  total flux cleaned = -0.00434364 Jy
! Component: 1850  -  total flux cleaned = -0.00442754 Jy
! Component: 1900  -  total flux cleaned = -0.00451077 Jy
! Component: 1950  -  total flux cleaned = -0.00455786 Jy
! Component: 2000  -  total flux cleaned = -0.00461609 Jy
! Component: 2050  -  total flux cleaned = -0.00465064 Jy
! Component: 2100  -  total flux cleaned = -0.00474203 Jy
! Component: 2150  -  total flux cleaned = -0.00479842 Jy
! Component: 2200  -  total flux cleaned = -0.00484313 Jy
! Component: 2250  -  total flux cleaned = -0.00485426 Jy
! Component: 2300  -  total flux cleaned = -0.00489849 Jy
! Component: 2350  -  total flux cleaned = -0.00495318 Jy
! Component: 2400  -  total flux cleaned = -0.0049966 Jy
! Component: 2450  -  total flux cleaned = -0.00510398 Jy
! Component: 2500  -  total flux cleaned = -0.00511451 Jy
! Component: 2550  -  total flux cleaned = -0.00516725 Jy
! Component: 2600  -  total flux cleaned = -0.00520911 Jy
! Component: 2650  -  total flux cleaned = -0.00530258 Jy
! Component: 2700  -  total flux cleaned = -0.00532314 Jy
! Component: 2750  -  total flux cleaned = -0.00536401 Jy
! Component: 2800  -  total flux cleaned = -0.00545531 Jy
! Component: 2850  -  total flux cleaned = -0.00544523 Jy
! Component: 2900  -  total flux cleaned = -0.00550518 Jy
! Component: 2950  -  total flux cleaned = -0.00555472 Jy
! Component: 3000  -  total flux cleaned = -0.00560391 Jy
! Component: 3050  -  total flux cleaned = -0.0056331 Jy
! Component: 3100  -  total flux cleaned = -0.00568143 Jy
! Component: 3150  -  total flux cleaned = -0.0057006 Jy
! Component: 3200  -  total flux cleaned = -0.00572922 Jy
! Component: 3250  -  total flux cleaned = -0.00577668 Jy
! Component: 3300  -  total flux cleaned = -0.00581424 Jy
! Component: 3350  -  total flux cleaned = -0.00585156 Jy
! Component: 3400  -  total flux cleaned = -0.00587928 Jy
! Component: 3450  -  total flux cleaned = -0.00591606 Jy
! Component: 3500  -  total flux cleaned = -0.00594344 Jy
! Component: 3550  -  total flux cleaned = -0.00598873 Jy
! Component: 3600  -  total flux cleaned = -0.0060429 Jy
! Component: 3650  -  total flux cleaned = -0.00608762 Jy
! Component: 3700  -  total flux cleaned = -0.00613214 Jy
! Component: 3750  -  total flux cleaned = -0.0061409 Jy
! Component: 3800  -  total flux cleaned = -0.00621101 Jy
! Component: 3850  -  total flux cleaned = -0.00621104 Jy
! Component: 3900  -  total flux cleaned = -0.00625432 Jy
! Component: 3950  -  total flux cleaned = -0.00632316 Jy
! Component: 4000  -  total flux cleaned = -0.00634878 Jy
! Component: 4050  -  total flux cleaned = -0.00638276 Jy
! Total flux subtracted in 4096 components = -0.00639967 Jy
! Clean residual min=-0.000493 max=0.000641 Jy/beam
! Clean residual mean=0.000001 rms=0.000164 Jy/beam
! Combined flux in latest and established models = 0.301689 Jy
keep
! Adding 283 model components to the UV plane model.
! The established model now contains 401 components and 0.301689 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J0048+0640_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.608 x 13.17 at -18.16 degrees (North through East)
! Clean map  min=-0.0013576  max=0.21562 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J0048+0640_S_map.fits
wmodel /image_prod/ug002_uva//J0048+0640_S_map.mod
! Writing 401 model components to file: /image_prod/ug002_uva//J0048+0640_S_map.mod
wobs   /image_prod/ug002_uva//J0048+0640_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J0048+0640_S_uvs.fits
wwins  /image_prod/ug002_uva//J0048+0640_S_map.win
! wwins: Wrote 4 windows to /image_prod/ug002_uva//J0048+0640_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.215618 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000162334 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.225864 0.225864 0.451729 0.903457 1.80691 3.61383 7.22766 14.4553 28.9106 57.8213
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.215 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1328.23 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J0048+0640_S_dfm.log closed on Wed Mar  4 18:39:33 2020