! Started logfile: /image_prod/ug002_uva//J0047+0319_X_dfm.log on Wed Mar  4 18:38:55 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /image_prod/ug002_uva//J0047+0319_X_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J0047+0319_X_uva.fits
! AN table 1: 75 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.973333 visibilities/baseline/integration-bin.
! Found source: J0047+0319
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 31536 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0047+0319_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.034424Jy  sigma=8.870886
! Fit after  self-cal, rms=0.715989Jy  sigma=6.156677
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7502 mas, bmaj=3.29 mas, bpa=-18.86 degrees
! Estimated noise=0.81123 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.216264 Jy
! Component: 100  -  total flux cleaned = 0.26516 Jy
! Total flux subtracted in 100 components = 0.26516 Jy
! Clean residual min=-0.007213 max=0.017787 Jy/beam
! Clean residual mean=-0.000002 rms=0.001950 Jy/beam
! Combined flux in latest and established models = 0.26516 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.26516 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071753Jy  sigma=0.590361
! Fit after  self-cal, rms=0.071752Jy  sigma=0.590331
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0190175 Jy
! Component: 100  -  total flux cleaned = 0.0297604 Jy
! Total flux subtracted in 100 components = 0.0297604 Jy
! Clean residual min=-0.005560 max=0.008640 Jy/beam
! Clean residual mean=-0.000001 rms=0.001425 Jy/beam
! Combined flux in latest and established models = 0.294921 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 10 components and 0.294921 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064881Jy  sigma=0.531323
! Fit after  self-cal, rms=0.064888Jy  sigma=0.531287
! Inverting map 
! Added new window around map position (1.6, 1.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00831083 Jy
! Component: 100  -  total flux cleaned = 0.0125558 Jy
! Total flux subtracted in 100 components = 0.0125558 Jy
! Clean residual min=-0.005057 max=0.007203 Jy/beam
! Clean residual mean=0.000000 rms=0.001285 Jy/beam
! Combined flux in latest and established models = 0.307476 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 19 components and 0.307476 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063436Jy  sigma=0.518833
! Fit after  self-cal, rms=0.063388Jy  sigma=0.518459
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9657 mas, bmaj=3.34 mas, bpa=-17.76 degrees
! Estimated noise=0.468927 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00561929 Jy
! Component: 100  -  total flux cleaned = 0.00620659 Jy
! Component: 150  -  total flux cleaned = 0.00678251 Jy
! Component: 200  -  total flux cleaned = 0.00696284 Jy
! Total flux subtracted in 200 components = 0.00696284 Jy
! Clean residual min=-0.005492 max=0.005611 Jy/beam
! Clean residual mean=0.000001 rms=0.001446 Jy/beam
! Combined flux in latest and established models = 0.314439 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 42 components and 0.314439 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062741Jy  sigma=0.512995
! Fit after  self-cal, rms=0.062722Jy  sigma=0.512842
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9657 x 3.34 at -17.76 degrees (North through East)
! Clean map  min=-0.0053418  max=0.28136 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.03     HN        1.03     KP        1.09     
!   LA        1.03     MK        1.03     NL        1.09     OV        0.94     
!   PT        0.92     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.04     HN        1.04     KP        1.09     
!   LA        1.02     MK        1.01     NL        1.08     OV        0.95     
!   PT        0.92     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.03     HN        1.03     KP        1.08     
!   LA        1.03     MK        1.02     NL        1.07     OV        0.94     
!   PT        0.92     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.03     HN        1.04     KP        1.08     
!   LA        1.03     MK        1.02     NL        1.07     OV        0.94     
!   PT        0.91     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.03     HN        1.03     KP        1.08     
!   LA        1.01     MK        1.02     NL        1.07     OV        0.92     
!   PT        0.93     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.03     HN        1.02     KP        1.06     
!   LA        1.02     MK        1.01     NL        1.08     OV        0.93     
!   PT        0.90     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.02     HN        1.02     KP        1.07     
!   LA        1.00     MK        1.00     NL        1.06     OV        0.94     
!   PT        0.91     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.03     HN        1.02     KP        1.06     
!   LA        1.00     MK        1.01     NL        1.05     OV        0.91     
!   PT        0.91     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.02     HN        1.02     KP        1.06     
!   LA        1.00     MK        0.99     NL        1.06     OV        0.90     
!   PT        0.90     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.02     HN        1.02     KP        1.06     
!   LA        0.99     MK        0.99     NL        1.04     OV        0.91     
!   PT        0.91     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.01     HN        1.01     KP        1.06     
!   LA        1.00     MK        0.98     NL        1.04     OV        0.92     
!   PT        0.89     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.01     HN        1.03     KP        1.02     
!   LA        0.99     MK        0.99     NL        1.04     OV        0.91     
!   PT        0.89     
! 
! 
! Fit before self-cal, rms=0.062722Jy  sigma=0.512842
! Fit after  self-cal, rms=0.058351Jy  sigma=0.477527
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9734 mas, bmaj=3.323 mas, bpa=-17.68 degrees
! Estimated noise=0.468292 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00405083 Jy
! Component: 100  -  total flux cleaned = -0.00492 Jy
! Component: 150  -  total flux cleaned = -0.00522963 Jy
! Component: 200  -  total flux cleaned = -0.00532336 Jy
! Total flux subtracted in 200 components = -0.00532336 Jy
! Clean residual min=-0.002456 max=0.002279 Jy/beam
! Clean residual mean=0.000001 rms=0.000590 Jy/beam
! Combined flux in latest and established models = 0.309116 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 59 components and 0.309116 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058063Jy  sigma=0.474969
! Fit after  self-cal, rms=0.058074Jy  sigma=0.474854
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058074Jy  sigma=0.474854
! Fit after  self-cal, rms=0.057762Jy  sigma=0.469975
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9739 mas, bmaj=3.322 mas, bpa=-17.67 degrees
! Estimated noise=0.467761 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00234185 Jy
! Component: 100  -  total flux cleaned = -0.00254447 Jy
! Component: 150  -  total flux cleaned = -0.00262139 Jy
! Component: 200  -  total flux cleaned = -0.00262133 Jy
! Total flux subtracted in 200 components = -0.00262133 Jy
! Clean residual min=-0.001729 max=0.001665 Jy/beam
! Clean residual mean=0.000001 rms=0.000399 Jy/beam
! Combined flux in latest and established models = 0.306494 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 70 components and 0.306494 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057650Jy  sigma=0.469018
! Fit after  self-cal, rms=0.057650Jy  sigma=0.468963
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00020323 Jy
! Component: 100  -  total flux cleaned = -0.000176006 Jy
! Component: 150  -  total flux cleaned = -0.000267928 Jy
! Component: 200  -  total flux cleaned = -0.000287682 Jy
! Total flux subtracted in 200 components = -0.000287682 Jy
! Clean residual min=-0.001754 max=0.001623 Jy/beam
! Clean residual mean=0.000001 rms=0.000393 Jy/beam
! Combined flux in latest and established models = 0.306207 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 79 components and 0.306207 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057627Jy  sigma=0.468791
! Fit after  self-cal, rms=0.057626Jy  sigma=0.468782
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057626Jy  sigma=0.468782
! Fit after  self-cal, rms=0.057706Jy  sigma=0.468287
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9753 mas, bmaj=3.318 mas, bpa=-17.66 degrees
! Estimated noise=0.46761 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00149839 Jy
! Component: 100  -  total flux cleaned = -0.00173411 Jy
! Component: 150  -  total flux cleaned = -0.00183759 Jy
! Component: 200  -  total flux cleaned = -0.00188229 Jy
! Total flux subtracted in 200 components = -0.00188229 Jy
! Clean residual min=-0.001544 max=0.001412 Jy/beam
! Clean residual mean=0.000000 rms=0.000342 Jy/beam
! Combined flux in latest and established models = 0.304324 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 84 components and 0.304324 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057659Jy  sigma=0.467884
! Fit after  self-cal, rms=0.057660Jy  sigma=0.467870
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000222361 Jy
! Component: 100  -  total flux cleaned = -0.000221142 Jy
! Component: 150  -  total flux cleaned = -0.000236909 Jy
! Component: 200  -  total flux cleaned = -0.000266173 Jy
! Total flux subtracted in 200 components = -0.000266173 Jy
! Clean residual min=-0.001541 max=0.001390 Jy/beam
! Clean residual mean=0.000000 rms=0.000339 Jy/beam
! Combined flux in latest and established models = 0.304058 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 91 components and 0.304058 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057650Jy  sigma=0.467789
! Fit after  self-cal, rms=0.057649Jy  sigma=0.467785
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057649Jy  sigma=0.467785
! Fit after  self-cal, rms=0.057727Jy  sigma=0.467578
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.236 mas, bmaj=3.546 mas, bpa=-7.17 degrees
! Estimated noise=0.553924 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00103072 Jy
! Component: 100  -  total flux cleaned = -0.00118049 Jy
! Component: 150  -  total flux cleaned = -0.00124212 Jy
! Component: 200  -  total flux cleaned = -0.00123074 Jy
! Total flux subtracted in 200 components = -0.00123074 Jy
! Clean residual min=-0.001968 max=0.001787 Jy/beam
! Clean residual mean=0.000001 rms=0.000399 Jy/beam
! Combined flux in latest and established models = 0.302828 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 103 components and 0.302827 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057713Jy  sigma=0.467437
! Fit after  self-cal, rms=0.057714Jy  sigma=0.467415
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.17435e-05 Jy
! Component: 100  -  total flux cleaned = -9.23709e-05 Jy
! Component: 150  -  total flux cleaned = -8.28354e-05 Jy
! Component: 200  -  total flux cleaned = -6.70201e-05 Jy
! Total flux subtracted in 200 components = -6.70201e-05 Jy
! Clean residual min=-0.001963 max=0.001788 Jy/beam
! Clean residual mean=0.000001 rms=0.000397 Jy/beam
! Combined flux in latest and established models = 0.30276 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 113 components and 0.30276 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057716Jy  sigma=0.467429
! Fit after  self-cal, rms=0.057716Jy  sigma=0.467426
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9767 mas, bmaj=3.314 mas, bpa=-17.66 degrees
! Estimated noise=0.467504 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9767 x 3.314 at -17.66 degrees (North through East)
! Clean map  min=-0.0014128  max=0.28247 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7572 mas, bmaj=3.255 mas, bpa=-18.82 degrees
! Estimated noise=0.815947 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.217491 Jy
! Component: 100  -  total flux cleaned = 0.265816 Jy
! Component: 150  -  total flux cleaned = 0.283351 Jy
! Component: 200  -  total flux cleaned = 0.291759 Jy
! Total flux subtracted in 200 components = 0.291759 Jy
! Clean residual min=-0.002393 max=0.003768 Jy/beam
! Clean residual mean=-0.000000 rms=0.000595 Jy/beam
! Combined flux in latest and established models = 0.291759 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.291759 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9767 mas, bmaj=3.314 mas, bpa=-17.66 degrees
! Estimated noise=0.467504 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00513842 Jy
! Component: 100  -  total flux cleaned = 0.00796498 Jy
! Component: 150  -  total flux cleaned = 0.00941591 Jy
! Component: 200  -  total flux cleaned = 0.00983739 Jy
! Total flux subtracted in 200 components = 0.00983739 Jy
! Clean residual min=-0.001471 max=0.001451 Jy/beam
! Clean residual mean=0.000000 rms=0.000326 Jy/beam
! Combined flux in latest and established models = 0.301597 Jy
! Adding 24 model components to the UV plane model.
! The established model now contains 28 components and 0.301597 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.236 mas, bmaj=3.546 mas, bpa=-7.17 degrees
! Estimated noise=0.553924 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000627642 Jy
! Component: 100  -  total flux cleaned = 0.000563067 Jy
! Component: 150  -  total flux cleaned = 0.000658871 Jy
! Component: 200  -  total flux cleaned = 0.000737492 Jy
! Total flux subtracted in 200 components = 0.000737492 Jy
! Clean residual min=-0.001826 max=0.001686 Jy/beam
! Clean residual mean=0.000001 rms=0.000400 Jy/beam
! Combined flux in latest and established models = 0.302334 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.05978e-05 Jy
! Component: 100  -  total flux cleaned = 0.000109747 Jy
! Component: 150  -  total flux cleaned = 0.000149387 Jy
! Component: 200  -  total flux cleaned = 0.000186042 Jy
! Total flux subtracted in 200 components = 0.000186042 Jy
! Clean residual min=-0.001839 max=0.001728 Jy/beam
! Clean residual mean=0.000001 rms=0.000398 Jy/beam
! Combined flux in latest and established models = 0.30252 Jy
! Adding 22 model components to the UV plane model.
! The established model now contains 46 components and 0.30252 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9767 mas, bmaj=3.314 mas, bpa=-17.66 degrees
! Estimated noise=0.467504 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000234951 Jy
! Component: 100  -  total flux cleaned = -0.000147698 Jy
! Component: 150  -  total flux cleaned = -0.000128894 Jy
! Component: 200  -  total flux cleaned = -0.000112254 Jy
! Total flux subtracted in 200 components = -0.000112254 Jy
! Clean residual min=-0.001438 max=0.001265 Jy/beam
! Clean residual mean=0.000000 rms=0.000309 Jy/beam
! Combined flux in latest and established models = 0.302408 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 57 components and 0.302408 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057707Jy  sigma=0.467360
! Fit after  self-cal, rms=0.057699Jy  sigma=0.467331
wmodel J0047+0319_X_map.mod
! Writing 57 model components to file: J0047+0319_X_map.mod
wobs   J0047+0319_X_uvs.fits
! Writing UV FITS file: J0047+0319_X_uvs.fits
wwins  J0047+0319_X_map.win
! wwins: Wrote 2 windows to J0047+0319_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000457146 Jy
! Component: 100  -  total flux cleaned = -0.000566225 Jy
! Component: 150  -  total flux cleaned = -0.000647031 Jy
! Component: 200  -  total flux cleaned = -0.000646169 Jy
! Component: 250  -  total flux cleaned = -0.000590221 Jy
! Component: 300  -  total flux cleaned = -0.000535956 Jy
! Component: 350  -  total flux cleaned = -0.000466277 Jy
! Component: 400  -  total flux cleaned = -0.000466432 Jy
! Component: 450  -  total flux cleaned = -0.000433293 Jy
! Component: 500  -  total flux cleaned = -0.00040112 Jy
! Component: 550  -  total flux cleaned = -0.0004171 Jy
! Component: 600  -  total flux cleaned = -0.000448063 Jy
! Component: 650  -  total flux cleaned = -0.000355945 Jy
! Component: 700  -  total flux cleaned = -0.000326028 Jy
! Component: 750  -  total flux cleaned = -0.000252775 Jy
! Component: 800  -  total flux cleaned = -0.000209023 Jy
! Component: 850  -  total flux cleaned = -9.46595e-05 Jy
! Component: 900  -  total flux cleaned = 3.85591e-06 Jy
! Component: 950  -  total flux cleaned = 0.000100581 Jy
! Component: 1000  -  total flux cleaned = 0.000168634 Jy
! Component: 1050  -  total flux cleaned = 0.000236263 Jy
! Component: 1100  -  total flux cleaned = 0.000328968 Jy
! Component: 1150  -  total flux cleaned = 0.000407266 Jy
! Component: 1200  -  total flux cleaned = 0.000420253 Jy
! Component: 1250  -  total flux cleaned = 0.000547548 Jy
! Component: 1300  -  total flux cleaned = 0.000559915 Jy
! Component: 1350  -  total flux cleaned = 0.000609454 Jy
! Component: 1400  -  total flux cleaned = 0.000658441 Jy
! Component: 1450  -  total flux cleaned = 0.000670737 Jy
! Component: 1500  -  total flux cleaned = 0.000766737 Jy
! Component: 1550  -  total flux cleaned = 0.000790459 Jy
! Component: 1600  -  total flux cleaned = 0.000872677 Jy
! Component: 1650  -  total flux cleaned = 0.000930862 Jy
! Component: 1700  -  total flux cleaned = 0.00102249 Jy
! Component: 1750  -  total flux cleaned = 0.00105656 Jy
! Component: 1800  -  total flux cleaned = 0.00110157 Jy
! Component: 1850  -  total flux cleaned = 0.00113487 Jy
! Component: 1900  -  total flux cleaned = 0.00119 Jy
! Component: 1950  -  total flux cleaned = 0.00124458 Jy
! Component: 2000  -  total flux cleaned = 0.00129855 Jy
! Component: 2050  -  total flux cleaned = 0.00134138 Jy
! Component: 2100  -  total flux cleaned = 0.00141558 Jy
! Component: 2150  -  total flux cleaned = 0.00145746 Jy
! Component: 2200  -  total flux cleaned = 0.00147829 Jy
! Component: 2250  -  total flux cleaned = 0.00154023 Jy
! Component: 2300  -  total flux cleaned = 0.00159141 Jy
! Component: 2350  -  total flux cleaned = 0.00168235 Jy
! Component: 2400  -  total flux cleaned = 0.00169253 Jy
! Component: 2450  -  total flux cleaned = 0.00180162 Jy
! Component: 2500  -  total flux cleaned = 0.00181146 Jy
! Component: 2550  -  total flux cleaned = 0.00191849 Jy
! Component: 2600  -  total flux cleaned = 0.00190883 Jy
! Component: 2650  -  total flux cleaned = 0.00198543 Jy
! Component: 2700  -  total flux cleaned = 0.00200448 Jy
! Component: 2750  -  total flux cleaned = 0.00206101 Jy
! Component: 2800  -  total flux cleaned = 0.00210775 Jy
! Component: 2850  -  total flux cleaned = 0.00213558 Jy
! Component: 2900  -  total flux cleaned = 0.00218132 Jy
! Component: 2950  -  total flux cleaned = 0.00223596 Jy
! Component: 3000  -  total flux cleaned = 0.00229001 Jy
! Component: 3050  -  total flux cleaned = 0.00226315 Jy
! Component: 3100  -  total flux cleaned = 0.0023254 Jy
! Component: 3150  -  total flux cleaned = 0.00237825 Jy
! Component: 3200  -  total flux cleaned = 0.00243072 Jy
! Component: 3250  -  total flux cleaned = 0.00248275 Jy
! Component: 3300  -  total flux cleaned = 0.00247413 Jy
! Component: 3350  -  total flux cleaned = 0.00249134 Jy
! Component: 3400  -  total flux cleaned = 0.00255066 Jy
! Component: 3450  -  total flux cleaned = 0.00256738 Jy
! Component: 3500  -  total flux cleaned = 0.00259241 Jy
! Component: 3550  -  total flux cleaned = 0.0026256 Jy
! Component: 3600  -  total flux cleaned = 0.00261733 Jy
! Component: 3650  -  total flux cleaned = 0.00265016 Jy
! Component: 3700  -  total flux cleaned = 0.00267449 Jy
! Component: 3750  -  total flux cleaned = 0.00273891 Jy
! Component: 3800  -  total flux cleaned = 0.00273085 Jy
! Component: 3850  -  total flux cleaned = 0.00275463 Jy
! Component: 3900  -  total flux cleaned = 0.00273882 Jy
! Component: 3950  -  total flux cleaned = 0.00278585 Jy
! Component: 4000  -  total flux cleaned = 0.0027936 Jy
! Component: 4050  -  total flux cleaned = 0.00280143 Jy
! Total flux subtracted in 4096 components = 0.00282449 Jy
! Clean residual min=-0.000420 max=0.000420 Jy/beam
! Clean residual mean=0.000000 rms=0.000147 Jy/beam
! Combined flux in latest and established models = 0.305233 Jy
keep
! Adding 323 model components to the UV plane model.
! The established model now contains 380 components and 0.305233 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J0047+0319_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9767 x 3.314 at -17.66 degrees (North through East)
! Clean map  min=-0.0010152  max=0.28279 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J0047+0319_X_map.fits
wmodel /image_prod/ug002_uva//J0047+0319_X_map.mod
! Writing 380 model components to file: /image_prod/ug002_uva//J0047+0319_X_map.mod
wobs   /image_prod/ug002_uva//J0047+0319_X_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J0047+0319_X_uvs.fits
wwins  /image_prod/ug002_uva//J0047+0319_X_map.win
! wwins: Wrote 3 windows to /image_prod/ug002_uva//J0047+0319_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.282786 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000146711 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.155641 0.155641 0.311282 0.622564 1.24513 2.49025 4.98051 9.96102 19.922 39.8441 79.6882
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.282 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1927.51 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J0047+0319_X_dfm.log closed on Wed Mar  4 18:39:00 2020