! Started logfile: /image_prod/ug002_uva//J0039-0942_S_dfm.log on Wed Mar  4 18:34:53 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J0039-0942_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J0039-0942_S_uva.fits
! AN table 1: 25 integrations on 36 of 36 possible baselines.
! AN table 2: 25 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.983333 visibilities/baseline/integration-bin.
! Found source: J0039-0942
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 5310 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0039-0942_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 1 telescope corrections were flagged in sub-array 1.
!  A total of 2 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 1 telescope corrections were flagged in sub-array 1.
!  A total of 2 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 1 telescope corrections were flagged in sub-array 1.
!  A total of 2 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.009512Jy  sigma=7.660343
! Fit after  self-cal, rms=0.805163Jy  sigma=6.129971
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.652 mas, bmaj=6.858 mas, bpa=-3.149 degrees
! Estimated noise=2.18076 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.155263 Jy
! Component: 100  -  total flux cleaned = 0.189149 Jy
! Total flux subtracted in 100 components = 0.189149 Jy
! Clean residual min=-0.009558 max=0.014654 Jy/beam
! Clean residual mean=0.000029 rms=0.002673 Jy/beam
! Combined flux in latest and established models = 0.189149 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.189149 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.078279Jy  sigma=0.529296
! Fit after  self-cal, rms=0.078266Jy  sigma=0.529270
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.239 mas, bmaj=8.056 mas, bpa=-2.411 degrees
! Estimated noise=1.31391 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00981515 Jy
! Component: 100  -  total flux cleaned = 0.0138468 Jy
! Component: 150  -  total flux cleaned = 0.0147832 Jy
! Component: 200  -  total flux cleaned = 0.0151262 Jy
! Total flux subtracted in 200 components = 0.0151262 Jy
! Clean residual min=-0.009550 max=0.012592 Jy/beam
! Clean residual mean=0.000023 rms=0.002523 Jy/beam
! Combined flux in latest and established models = 0.204275 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 21 components and 0.204275 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077262Jy  sigma=0.518818
! Fit after  self-cal, rms=0.077258Jy  sigma=0.518762
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.239 x 8.056 at -2.411 degrees (North through East)
! Clean map  min=-0.009282  max=0.19747 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.16     FD        0.93     KP        0.99     LA        1.01     
!   MK        0.95     NL        1.46     OV        0.85     PT        1.02     
!   SC        1.02     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.12     FD        0.99     HN        0.93     KP        0.97     
!   LA        1.00     MK        0.97     OV        0.80     PT        1.00     
!   SC        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.50     FD        0.93     KP        0.99     LA        1.00     
!   MK        0.94     NL        1.55     OV        0.92     PT        1.00     
!   SC        0.74     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.82     FD        0.96     HN        0.94     KP        1.00     
!   LA        0.99     MK        0.97     OV        0.90     PT        0.99     
!   SC        0.98     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.37     FD        0.97     KP        1.00     LA        1.00     
!   MK        0.96     NL        1.34     OV        0.81     PT        1.00     
!   SC        1.01     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.09     FD        0.95     HN        1.50     KP        1.02     
!   LA        0.98     MK        0.96     OV        0.83     PT        0.99     
!   SC        0.99     
! 
! 
! Fit before self-cal, rms=0.077258Jy  sigma=0.518762
! Fit after  self-cal, rms=0.069959Jy  sigma=0.451339
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.209 mas, bmaj=8.066 mas, bpa=-2.072 degrees
! Estimated noise=1.30896 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00015691 Jy
! Component: 100  -  total flux cleaned = 0.000154192 Jy
! Component: 150  -  total flux cleaned = 0.000153733 Jy
! Component: 200  -  total flux cleaned = 0.000126325 Jy
! Total flux subtracted in 200 components = 0.000126325 Jy
! Clean residual min=-0.002750 max=0.003022 Jy/beam
! Clean residual mean=0.000000 rms=0.000693 Jy/beam
! Combined flux in latest and established models = 0.204401 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 28 components and 0.204401 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.069912Jy  sigma=0.451068
! Fit after  self-cal, rms=0.070082Jy  sigma=0.450662
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.070082Jy  sigma=0.450662
! Fit after  self-cal, rms=0.070267Jy  sigma=0.450632
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.204 mas, bmaj=8.066 mas, bpa=-2.137 degrees
! Estimated noise=1.30939 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00023199 Jy
! Component: 100  -  total flux cleaned = 0.000231071 Jy
! Component: 150  -  total flux cleaned = 0.000231688 Jy
! Component: 200  -  total flux cleaned = 0.000232306 Jy
! Total flux subtracted in 200 components = 0.000232306 Jy
! Clean residual min=-0.002674 max=0.002907 Jy/beam
! Clean residual mean=0.000000 rms=0.000682 Jy/beam
! Combined flux in latest and established models = 0.204634 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 32 components and 0.204634 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.070235Jy  sigma=0.450461
! Fit after  self-cal, rms=0.070231Jy  sigma=0.450438
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000129845 Jy
! Component: 100  -  total flux cleaned = -0.000152321 Jy
! Component: 150  -  total flux cleaned = -0.000152328 Jy
! Component: 200  -  total flux cleaned = -0.000171696 Jy
! Total flux subtracted in 200 components = -0.000171696 Jy
! Clean residual min=-0.002636 max=0.002860 Jy/beam
! Clean residual mean=0.000000 rms=0.000676 Jy/beam
! Combined flux in latest and established models = 0.204462 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 35 components and 0.204462 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.070214Jy  sigma=0.450338
! Fit after  self-cal, rms=0.070210Jy  sigma=0.450324
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.070210Jy  sigma=0.450324
! Fit after  self-cal, rms=0.070311Jy  sigma=0.450293
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.199 mas, bmaj=8.063 mas, bpa=-2.189 degrees
! Estimated noise=1.30903 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000252272 Jy
! Component: 100  -  total flux cleaned = 0.000324961 Jy
! Component: 150  -  total flux cleaned = 0.00032456 Jy
! Component: 200  -  total flux cleaned = 0.000307416 Jy
! Total flux subtracted in 200 components = 0.000307416 Jy
! Clean residual min=-0.002604 max=0.002903 Jy/beam
! Clean residual mean=-0.000000 rms=0.000669 Jy/beam
! Combined flux in latest and established models = 0.204769 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 36 components and 0.204769 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.070292Jy  sigma=0.450210
! Fit after  self-cal, rms=0.070291Jy  sigma=0.450200
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (18.5, 10.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0026208 Jy
! Component: 100  -  total flux cleaned = 0.00296287 Jy
! Component: 150  -  total flux cleaned = 0.00325639 Jy
! Component: 200  -  total flux cleaned = 0.00346817 Jy
! Total flux subtracted in 200 components = 0.00346817 Jy
! Clean residual min=-0.002524 max=0.002364 Jy/beam
! Clean residual mean=0.000001 rms=0.000575 Jy/beam
! Combined flux in latest and established models = 0.208237 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 57 components and 0.208237 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.070180Jy  sigma=0.449166
! Fit after  self-cal, rms=0.070170Jy  sigma=0.449119
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.070170Jy  sigma=0.449119
! Fit after  self-cal, rms=0.070233Jy  sigma=0.449070
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.686 mas, bmaj=15.32 mas, bpa=5.531 degrees
! Estimated noise=1.62617 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0010509 Jy
! Component: 100  -  total flux cleaned = 0.00101756 Jy
! Component: 150  -  total flux cleaned = 0.000991729 Jy
! Component: 200  -  total flux cleaned = 0.00099228 Jy
! Total flux subtracted in 200 components = 0.00099228 Jy
! Clean residual min=-0.002582 max=0.002665 Jy/beam
! Clean residual mean=0.000003 rms=0.000718 Jy/beam
! Combined flux in latest and established models = 0.20923 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 67 components and 0.20923 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.070211Jy  sigma=0.448961
! Fit after  self-cal, rms=0.070204Jy  sigma=0.448922
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000102583 Jy
! Component: 100  -  total flux cleaned = 5.13182e-05 Jy
! Component: 150  -  total flux cleaned = 2.93202e-05 Jy
! Component: 200  -  total flux cleaned = 4.87883e-05 Jy
! Total flux subtracted in 200 components = 4.87883e-05 Jy
! Clean residual min=-0.002469 max=0.002515 Jy/beam
! Clean residual mean=0.000003 rms=0.000709 Jy/beam
! Combined flux in latest and established models = 0.209279 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 73 components and 0.209279 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.070199Jy  sigma=0.448944
! Fit after  self-cal, rms=0.070193Jy  sigma=0.448927
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.194 mas, bmaj=8.062 mas, bpa=-2.237 degrees
! Estimated noise=1.30846 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.194 x 8.062 at -2.237 degrees (North through East)
! Clean map  min=-0.0021802  max=0.19797 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.627 mas, bmaj=6.9 mas, bpa=-2.8 degrees
! Estimated noise=2.15394 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.153301 Jy
! Component: 100  -  total flux cleaned = 0.186801 Jy
! Component: 150  -  total flux cleaned = 0.196665 Jy
! Component: 200  -  total flux cleaned = 0.201247 Jy
! Total flux subtracted in 200 components = 0.201247 Jy
! Clean residual min=-0.004145 max=0.003874 Jy/beam
! Clean residual mean=0.000005 rms=0.000938 Jy/beam
! Combined flux in latest and established models = 0.201247 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.201247 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.194 mas, bmaj=8.062 mas, bpa=-2.237 degrees
! Estimated noise=1.30846 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (2.5, 4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00387428 Jy
! Component: 100  -  total flux cleaned = 0.00480954 Jy
! Component: 150  -  total flux cleaned = 0.00592052 Jy
! Component: 200  -  total flux cleaned = 0.00668034 Jy
! Total flux subtracted in 200 components = 0.00668034 Jy
! Clean residual min=-0.002722 max=0.002371 Jy/beam
! Clean residual mean=0.000001 rms=0.000595 Jy/beam
! Combined flux in latest and established models = 0.207927 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 46 components and 0.207927 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.686 mas, bmaj=15.32 mas, bpa=5.531 degrees
! Estimated noise=1.62617 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00125282 Jy
! Component: 100  -  total flux cleaned = 0.00160808 Jy
! Component: 150  -  total flux cleaned = 0.00188257 Jy
! Component: 200  -  total flux cleaned = 0.00191829 Jy
! Total flux subtracted in 200 components = 0.00191829 Jy
! Clean residual min=-0.002521 max=0.002630 Jy/beam
! Clean residual mean=0.000002 rms=0.000700 Jy/beam
! Combined flux in latest and established models = 0.209845 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.41918e-07 Jy
! Component: 100  -  total flux cleaned = 5.21293e-05 Jy
! Component: 150  -  total flux cleaned = 9.85562e-05 Jy
! Component: 200  -  total flux cleaned = 0.00014177 Jy
! Total flux subtracted in 200 components = 0.00014177 Jy
! Clean residual min=-0.002384 max=0.002538 Jy/beam
! Clean residual mean=0.000002 rms=0.000689 Jy/beam
! Combined flux in latest and established models = 0.209987 Jy
! Adding 43 model components to the UV plane model.
! The established model now contains 85 components and 0.209987 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.194 mas, bmaj=8.062 mas, bpa=-2.237 degrees
! Estimated noise=1.30846 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000347835 Jy
! Component: 100  -  total flux cleaned = -0.0003494 Jy
! Component: 150  -  total flux cleaned = -0.000384475 Jy
! Component: 200  -  total flux cleaned = -0.000448247 Jy
! Total flux subtracted in 200 components = -0.000448247 Jy
! Clean residual min=-0.002164 max=0.002134 Jy/beam
! Clean residual mean=0.000001 rms=0.000528 Jy/beam
! Combined flux in latest and established models = 0.209539 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 105 components and 0.209539 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.070142Jy  sigma=0.448613
! Fit after  self-cal, rms=0.070127Jy  sigma=0.448564
wmodel J0039-0942_S_map.mod
! Writing 105 model components to file: J0039-0942_S_map.mod
wobs   J0039-0942_S_uvs.fits
! Writing UV FITS file: J0039-0942_S_uvs.fits
wwins  J0039-0942_S_map.win
! wwins: Wrote 3 windows to J0039-0942_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000330623 Jy
! Component: 100  -  total flux cleaned = -0.000542691 Jy
! Component: 150  -  total flux cleaned = -0.000940943 Jy
! Component: 200  -  total flux cleaned = -0.00115952 Jy
! Component: 250  -  total flux cleaned = -0.00133798 Jy
! Component: 300  -  total flux cleaned = -0.00148022 Jy
! Component: 350  -  total flux cleaned = -0.00161675 Jy
! Component: 400  -  total flux cleaned = -0.00177548 Jy
! Component: 450  -  total flux cleaned = -0.00187808 Jy
! Component: 500  -  total flux cleaned = -0.00195273 Jy
! Component: 550  -  total flux cleaned = -0.00200124 Jy
! Component: 600  -  total flux cleaned = -0.00204878 Jy
! Component: 650  -  total flux cleaned = -0.0021413 Jy
! Component: 700  -  total flux cleaned = -0.00209599 Jy
! Component: 750  -  total flux cleaned = -0.00207375 Jy
! Component: 800  -  total flux cleaned = -0.0019874 Jy
! Component: 850  -  total flux cleaned = -0.00188211 Jy
! Component: 900  -  total flux cleaned = -0.00184042 Jy
! Component: 950  -  total flux cleaned = -0.00175921 Jy
! Component: 1000  -  total flux cleaned = -0.00173911 Jy
! Component: 1050  -  total flux cleaned = -0.00166034 Jy
! Component: 1100  -  total flux cleaned = -0.00156424 Jy
! Component: 1150  -  total flux cleaned = -0.00156465 Jy
! Component: 1200  -  total flux cleaned = -0.00160198 Jy
! Component: 1250  -  total flux cleaned = -0.00163864 Jy
! Component: 1300  -  total flux cleaned = -0.00162057 Jy
! Component: 1350  -  total flux cleaned = -0.00160299 Jy
! Component: 1400  -  total flux cleaned = -0.00163783 Jy
! Component: 1450  -  total flux cleaned = -0.00167219 Jy
! Component: 1500  -  total flux cleaned = -0.00167194 Jy
! Component: 1550  -  total flux cleaned = -0.00163799 Jy
! Component: 1600  -  total flux cleaned = -0.0016712 Jy
! Component: 1650  -  total flux cleaned = -0.00167097 Jy
! Component: 1700  -  total flux cleaned = -0.00162267 Jy
! Component: 1750  -  total flux cleaned = -0.00167035 Jy
! Component: 1800  -  total flux cleaned = -0.00168636 Jy
! Component: 1850  -  total flux cleaned = -0.00174837 Jy
! Component: 1900  -  total flux cleaned = -0.00176374 Jy
! Component: 1950  -  total flux cleaned = -0.00174881 Jy
! Component: 2000  -  total flux cleaned = -0.00183805 Jy
! Component: 2050  -  total flux cleaned = -0.00188199 Jy
! Component: 2100  -  total flux cleaned = -0.00191124 Jy
! Component: 2150  -  total flux cleaned = -0.00193974 Jy
! Component: 2200  -  total flux cleaned = -0.00193974 Jy
! Component: 2250  -  total flux cleaned = -0.00193991 Jy
! Component: 2300  -  total flux cleaned = -0.00193991 Jy
! Component: 2350  -  total flux cleaned = -0.00195356 Jy
! Component: 2400  -  total flux cleaned = -0.0019538 Jy
! Component: 2450  -  total flux cleaned = -0.00198073 Jy
! Component: 2500  -  total flux cleaned = -0.00198074 Jy
! Component: 2550  -  total flux cleaned = -0.00203359 Jy
! Component: 2600  -  total flux cleaned = -0.00202045 Jy
! Component: 2650  -  total flux cleaned = -0.00204621 Jy
! Component: 2700  -  total flux cleaned = -0.00203348 Jy
! Component: 2750  -  total flux cleaned = -0.0020715 Jy
! Component: 2800  -  total flux cleaned = -0.00209654 Jy
! Component: 2850  -  total flux cleaned = -0.00213368 Jy
! Component: 2900  -  total flux cleaned = -0.00212122 Jy
! Component: 2950  -  total flux cleaned = -0.00210912 Jy
! Component: 3000  -  total flux cleaned = -0.00212111 Jy
! Component: 3050  -  total flux cleaned = -0.002157 Jy
! Component: 3100  -  total flux cleaned = -0.0021214 Jy
! Component: 3150  -  total flux cleaned = -0.00213307 Jy
! Component: 3200  -  total flux cleaned = -0.00219144 Jy
! Component: 3250  -  total flux cleaned = -0.00215676 Jy
! Component: 3300  -  total flux cleaned = -0.00216827 Jy
! Component: 3350  -  total flux cleaned = -0.0021455 Jy
! Component: 3400  -  total flux cleaned = -0.00214545 Jy
! Component: 3450  -  total flux cleaned = -0.00216779 Jy
! Component: 3500  -  total flux cleaned = -0.00216785 Jy
! Component: 3550  -  total flux cleaned = -0.00215685 Jy
! Component: 3600  -  total flux cleaned = -0.00215695 Jy
! Component: 3650  -  total flux cleaned = -0.00215682 Jy
! Component: 3700  -  total flux cleaned = -0.00214594 Jy
! Component: 3750  -  total flux cleaned = -0.00214595 Jy
! Component: 3800  -  total flux cleaned = -0.00210329 Jy
! Component: 3850  -  total flux cleaned = -0.00211381 Jy
! Component: 3900  -  total flux cleaned = -0.00211362 Jy
! Component: 3950  -  total flux cleaned = -0.00211353 Jy
! Component: 4000  -  total flux cleaned = -0.00209273 Jy
! Component: 4050  -  total flux cleaned = -0.00205162 Jy
! Total flux subtracted in 4096 components = -0.0020824 Jy
! Clean residual min=-0.000603 max=0.000614 Jy/beam
! Clean residual mean=0.000001 rms=0.000178 Jy/beam
! Combined flux in latest and established models = 0.207457 Jy
keep
! Adding 265 model components to the UV plane model.
! The established model now contains 370 components and 0.207457 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J0039-0942_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.194 x 8.062 at -2.237 degrees (North through East)
! Clean map  min=-0.0013432  max=0.19699 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J0039-0942_S_map.fits
wmodel /image_prod/ug002_uva//J0039-0942_S_map.mod
! Writing 370 model components to file: /image_prod/ug002_uva//J0039-0942_S_map.mod
wobs   /image_prod/ug002_uva//J0039-0942_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J0039-0942_S_uvs.fits
wwins  /image_prod/ug002_uva//J0039-0942_S_map.win
! wwins: Wrote 4 windows to /image_prod/ug002_uva//J0039-0942_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.196992 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000175242 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.266877 0.266877 0.533754 1.06751 2.13502 4.27003 8.54006 17.0801 34.1603 68.3205
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.196 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1124.11 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J0039-0942_S_dfm.log closed on Wed Mar  4 18:34:56 2020