! Started logfile: /image_prod/ug002_uva//J0039+4900_S_dfm.log on Wed Mar  4 18:34:41 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J0039+4900_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J0039+4900_S_uva.fits
! AN table 1: 45 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.963951 visibilities/baseline/integration-bin.
! Found source: J0039+4900
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 5856 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0039+4900_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.036435Jy  sigma=8.606090
! Fit after  self-cal, rms=0.780889Jy  sigma=6.362030
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.179 mas, bmaj=4.665 mas, bpa=-6.118 degrees
! Estimated noise=1.56097 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.173868 Jy
! Component: 100  -  total flux cleaned = 0.221004 Jy
! Total flux subtracted in 100 components = 0.221004 Jy
! Clean residual min=-0.014981 max=0.050059 Jy/beam
! Clean residual mean=0.000003 rms=0.004796 Jy/beam
! Combined flux in latest and established models = 0.221004 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.221004 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.121791Jy  sigma=0.916254
! Fit after  self-cal, rms=0.121639Jy  sigma=0.914954
! Inverting map 
! Added new window around map position (-9, -6.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0439535 Jy
! Component: 100  -  total flux cleaned = 0.0675273 Jy
! Total flux subtracted in 100 components = 0.0675273 Jy
! Clean residual min=-0.013978 max=0.019856 Jy/beam
! Clean residual mean=-0.000002 rms=0.003398 Jy/beam
! Combined flux in latest and established models = 0.288532 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 23 components and 0.288532 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.103809Jy  sigma=0.733771
! Fit after  self-cal, rms=0.101560Jy  sigma=0.718153
! Inverting map 
! Added new window around map position (-5, -3.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0210624 Jy
! Component: 100  -  total flux cleaned = 0.0343858 Jy
! Total flux subtracted in 100 components = 0.0343858 Jy
! Clean residual min=-0.012936 max=0.011036 Jy/beam
! Clean residual mean=-0.000001 rms=0.002800 Jy/beam
! Combined flux in latest and established models = 0.322917 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 46 components and 0.322917 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.097160Jy  sigma=0.667681
! Fit after  self-cal, rms=0.096678Jy  sigma=0.664755
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.721 mas, bmaj=5.403 mas, bpa=-3.39 degrees
! Estimated noise=1.16796 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0114581 Jy
! Component: 100  -  total flux cleaned = 0.0182624 Jy
! Component: 150  -  total flux cleaned = 0.0213826 Jy
! Component: 200  -  total flux cleaned = 0.0221697 Jy
! Total flux subtracted in 200 components = 0.0221697 Jy
! Clean residual min=-0.013534 max=0.010866 Jy/beam
! Clean residual mean=-0.000003 rms=0.002895 Jy/beam
! Combined flux in latest and established models = 0.345087 Jy
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 74 components and 0.345087 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.095340Jy  sigma=0.649200
! Fit after  self-cal, rms=0.095139Jy  sigma=0.648012
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.721 x 5.403 at -3.39 degrees (North through East)
! Clean map  min=-0.013086  max=0.21876 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.05     HN        1.05     KP        1.05     
!   LA        1.03     MK        1.01     NL        1.00     OV        0.73     
!   PT        1.03     SC        1.04     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.91     FD        1.02     HN        1.01     KP        1.02     
!   LA        1.00     MK        0.98     NL        0.95     OV        1.03     
!   PT        1.02     SC        0.96     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.04     HN        1.03     KP        1.03     
!   LA        1.04     MK        1.01     NL        0.91     OV        0.72     
!   PT        1.04     SC        1.03     
! 
! 
! Fit before self-cal, rms=0.095139Jy  sigma=0.648012
! Fit after  self-cal, rms=0.082605Jy  sigma=0.589307
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.747 mas, bmaj=5.437 mas, bpa=-3.06 degrees
! Estimated noise=1.14187 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00141909 Jy
! Component: 100  -  total flux cleaned = -0.0012372 Jy
! Component: 150  -  total flux cleaned = -0.0011101 Jy
! Component: 200  -  total flux cleaned = -0.00101133 Jy
! Total flux subtracted in 200 components = -0.00101133 Jy
! Clean residual min=-0.008467 max=0.009861 Jy/beam
! Clean residual mean=-0.000005 rms=0.002410 Jy/beam
! Combined flux in latest and established models = 0.344076 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 91 components and 0.344076 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.082022Jy  sigma=0.584318
! Fit after  self-cal, rms=0.081938Jy  sigma=0.583416
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.081938Jy  sigma=0.583416
! Fit after  self-cal, rms=0.126083Jy  sigma=0.467624
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.729 mas, bmaj=5.433 mas, bpa=-3.409 degrees
! Estimated noise=1.14579 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00232472 Jy
! Component: 100  -  total flux cleaned = 0.00248592 Jy
! Component: 150  -  total flux cleaned = 0.00255702 Jy
! Component: 200  -  total flux cleaned = 0.00261275 Jy
! Total flux subtracted in 200 components = 0.00261275 Jy
! Clean residual min=-0.002731 max=0.002912 Jy/beam
! Clean residual mean=-0.000006 rms=0.000622 Jy/beam
! Combined flux in latest and established models = 0.346688 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 105 components and 0.346688 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.125952Jy  sigma=0.465937
! Fit after  self-cal, rms=0.126381Jy  sigma=0.465033
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (81, 58).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0024604 Jy
! Component: 100  -  total flux cleaned = 0.00346268 Jy
! Component: 150  -  total flux cleaned = 0.0040733 Jy
! Component: 200  -  total flux cleaned = 0.00433544 Jy
! Total flux subtracted in 200 components = 0.00433544 Jy
! Clean residual min=-0.002524 max=0.002267 Jy/beam
! Clean residual mean=-0.000007 rms=0.000566 Jy/beam
! Combined flux in latest and established models = 0.351024 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 125 components and 0.351024 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.126312Jy  sigma=0.463683
! Fit after  self-cal, rms=0.126290Jy  sigma=0.463620
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.126290Jy  sigma=0.463620
! Fit after  self-cal, rms=0.128165Jy  sigma=0.463309
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.729 mas, bmaj=5.431 mas, bpa=-3.216 degrees
! Estimated noise=1.14465 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00109695 Jy
! Component: 100  -  total flux cleaned = 0.00158086 Jy
! Component: 150  -  total flux cleaned = 0.00200093 Jy
! Component: 200  -  total flux cleaned = 0.00219009 Jy
! Total flux subtracted in 200 components = 0.00219009 Jy
! Clean residual min=-0.002248 max=0.002077 Jy/beam
! Clean residual mean=-0.000008 rms=0.000530 Jy/beam
! Combined flux in latest and established models = 0.353214 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 132 components and 0.353214 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.128113Jy  sigma=0.462735
! Fit after  self-cal, rms=0.128104Jy  sigma=0.462692
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000275706 Jy
! Component: 100  -  total flux cleaned = 0.000445312 Jy
! Component: 150  -  total flux cleaned = 0.000508954 Jy
! Component: 200  -  total flux cleaned = 0.000628405 Jy
! Total flux subtracted in 200 components = 0.000628405 Jy
! Clean residual min=-0.002186 max=0.001962 Jy/beam
! Clean residual mean=-0.000008 rms=0.000519 Jy/beam
! Combined flux in latest and established models = 0.353842 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 137 components and 0.353842 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.128082Jy  sigma=0.462427
! Fit after  self-cal, rms=0.128076Jy  sigma=0.462410
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.128076Jy  sigma=0.462410
! Fit after  self-cal, rms=0.128359Jy  sigma=0.462299
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.98 mas, bmaj=9.202 mas, bpa=8.458 degrees
! Estimated noise=1.40067 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00119792 Jy
! Component: 100  -  total flux cleaned = 0.00136621 Jy
! Component: 150  -  total flux cleaned = 0.00139235 Jy
! Component: 200  -  total flux cleaned = 0.00143649 Jy
! Total flux subtracted in 200 components = 0.00143649 Jy
! Clean residual min=-0.002314 max=0.002336 Jy/beam
! Clean residual mean=-0.000019 rms=0.000633 Jy/beam
! Combined flux in latest and established models = 0.355279 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 152 components and 0.355279 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.128357Jy  sigma=0.462188
! Fit after  self-cal, rms=0.128352Jy  sigma=0.462137
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.88427e-06 Jy
! Component: 100  -  total flux cleaned = 7.45531e-05 Jy
! Component: 150  -  total flux cleaned = 0.00011079 Jy
! Component: 200  -  total flux cleaned = 0.000143307 Jy
! Total flux subtracted in 200 components = 0.000143307 Jy
! Clean residual min=-0.002279 max=0.002262 Jy/beam
! Clean residual mean=-0.000020 rms=0.000623 Jy/beam
! Combined flux in latest and established models = 0.355422 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 156 components and 0.355422 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.128352Jy  sigma=0.462133
! Fit after  self-cal, rms=0.128347Jy  sigma=0.462117
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.729 mas, bmaj=5.429 mas, bpa=-3.054 degrees
! Estimated noise=1.14467 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.729 x 5.429 at -3.054 degrees (North through East)
! Clean map  min=-0.0019155  max=0.21465 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.197 mas, bmaj=4.674 mas, bpa=-5.74 degrees
! Estimated noise=1.52665 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.169915 Jy
! Component: 100  -  total flux cleaned = 0.229244 Jy
! Component: 150  -  total flux cleaned = 0.265344 Jy
! Component: 200  -  total flux cleaned = 0.289626 Jy
! Total flux subtracted in 200 components = 0.289626 Jy
! Clean residual min=-0.006181 max=0.013418 Jy/beam
! Clean residual mean=-0.000002 rms=0.001800 Jy/beam
! Combined flux in latest and established models = 0.289626 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 33 model components to the UV plane model.
! The established model now contains 33 components and 0.289626 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.729 mas, bmaj=5.429 mas, bpa=-3.054 degrees
! Estimated noise=1.14467 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0219786 Jy
! Component: 100  -  total flux cleaned = 0.0357499 Jy
! Component: 150  -  total flux cleaned = 0.0448883 Jy
! Component: 200  -  total flux cleaned = 0.0510592 Jy
! Total flux subtracted in 200 components = 0.0510592 Jy
! Clean residual min=-0.002953 max=0.003784 Jy/beam
! Clean residual mean=-0.000007 rms=0.000724 Jy/beam
! Combined flux in latest and established models = 0.340685 Jy
! Adding 48 model components to the UV plane model.
! The established model now contains 69 components and 0.340685 Jy
! Inverting map 
! Added new window around map position (-10.5, -12).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00445262 Jy
! Component: 100  -  total flux cleaned = 0.00778181 Jy
! Component: 150  -  total flux cleaned = 0.00969705 Jy
! Component: 200  -  total flux cleaned = 0.0108662 Jy
! Total flux subtracted in 200 components = 0.0108662 Jy
! Clean residual min=-0.002568 max=0.002211 Jy/beam
! Clean residual mean=-0.000007 rms=0.000569 Jy/beam
! Combined flux in latest and established models = 0.351551 Jy
! Adding 29 model components to the UV plane model.
! The established model now contains 93 components and 0.351551 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.98 mas, bmaj=9.202 mas, bpa=8.458 degrees
! Estimated noise=1.40067 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0023602 Jy
! Component: 100  -  total flux cleaned = 0.00308874 Jy
! Component: 150  -  total flux cleaned = 0.00375214 Jy
! Component: 200  -  total flux cleaned = 0.00428566 Jy
! Total flux subtracted in 200 components = 0.00428566 Jy
! Clean residual min=-0.002196 max=0.002316 Jy/beam
! Clean residual mean=-0.000019 rms=0.000628 Jy/beam
! Combined flux in latest and established models = 0.355837 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000138786 Jy
! Component: 100  -  total flux cleaned = 0.000264914 Jy
! Component: 150  -  total flux cleaned = 0.000352097 Jy
! Component: 200  -  total flux cleaned = 0.000459426 Jy
! Total flux subtracted in 200 components = 0.000459426 Jy
! Clean residual min=-0.002177 max=0.002282 Jy/beam
! Clean residual mean=-0.000020 rms=0.000617 Jy/beam
! Combined flux in latest and established models = 0.356296 Jy
! Adding 47 model components to the UV plane model.
! The established model now contains 129 components and 0.356296 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.729 mas, bmaj=5.429 mas, bpa=-3.054 degrees
! Estimated noise=1.14467 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000134731 Jy
! Component: 100  -  total flux cleaned = -0.000136085 Jy
! Component: 150  -  total flux cleaned = -4.64562e-05 Jy
! Component: 200  -  total flux cleaned = 0.000152679 Jy
! Total flux subtracted in 200 components = 0.000152679 Jy
! Clean residual min=-0.002155 max=0.002035 Jy/beam
! Clean residual mean=-0.000008 rms=0.000508 Jy/beam
! Combined flux in latest and established models = 0.356449 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 146 components and 0.356449 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.128344Jy  sigma=0.462269
! Fit after  self-cal, rms=0.128315Jy  sigma=0.462123
wmodel J0039+4900_S_map.mod
! Writing 146 model components to file: J0039+4900_S_map.mod
wobs   J0039+4900_S_uvs.fits
! Writing UV FITS file: J0039+4900_S_uvs.fits
wwins  J0039+4900_S_map.win
! wwins: Wrote 5 windows to J0039+4900_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000476495 Jy
! Component: 100  -  total flux cleaned = -0.000512226 Jy
! Component: 150  -  total flux cleaned = -0.00071538 Jy
! Component: 200  -  total flux cleaned = -0.000813337 Jy
! Component: 250  -  total flux cleaned = -0.000939998 Jy
! Component: 300  -  total flux cleaned = -0.000846597 Jy
! Component: 350  -  total flux cleaned = -0.00081634 Jy
! Component: 400  -  total flux cleaned = -0.000756949 Jy
! Component: 450  -  total flux cleaned = -0.000640964 Jy
! Component: 500  -  total flux cleaned = -0.00052674 Jy
! Component: 550  -  total flux cleaned = -0.000387351 Jy
! Component: 600  -  total flux cleaned = -0.000332499 Jy
! Component: 650  -  total flux cleaned = -0.000278444 Jy
! Component: 700  -  total flux cleaned = -0.000278141 Jy
! Component: 750  -  total flux cleaned = -0.000304041 Jy
! Component: 800  -  total flux cleaned = -0.000252374 Jy
! Component: 850  -  total flux cleaned = -0.000201551 Jy
! Component: 900  -  total flux cleaned = -0.000126956 Jy
! Component: 950  -  total flux cleaned = -5.35146e-05 Jy
! Component: 1000  -  total flux cleaned = -2.92775e-05 Jy
! Component: 1050  -  total flux cleaned = -5.19596e-06 Jy
! Component: 1100  -  total flux cleaned = 8.94496e-05 Jy
! Component: 1150  -  total flux cleaned = 0.000136195 Jy
! Component: 1200  -  total flux cleaned = 0.000228173 Jy
! Component: 1250  -  total flux cleaned = 0.00029597 Jy
! Component: 1300  -  total flux cleaned = 0.000228127 Jy
! Component: 1350  -  total flux cleaned = 0.000338991 Jy
! Component: 1400  -  total flux cleaned = 0.000360877 Jy
! Component: 1450  -  total flux cleaned = 0.000469451 Jy
! Component: 1500  -  total flux cleaned = 0.000469325 Jy
! Component: 1550  -  total flux cleaned = 0.000575449 Jy
! Component: 1600  -  total flux cleaned = 0.000596376 Jy
! Component: 1650  -  total flux cleaned = 0.000700773 Jy
! Component: 1700  -  total flux cleaned = 0.000721515 Jy
! Component: 1750  -  total flux cleaned = 0.00082404 Jy
! Component: 1800  -  total flux cleaned = 0.000925209 Jy
! Component: 1850  -  total flux cleaned = 0.000945409 Jy
! Component: 1900  -  total flux cleaned = 0.00106477 Jy
! Component: 1950  -  total flux cleaned = 0.00110412 Jy
! Component: 2000  -  total flux cleaned = 0.00116288 Jy
! Component: 2050  -  total flux cleaned = 0.00127899 Jy
! Component: 2100  -  total flux cleaned = 0.00131721 Jy
! Component: 2150  -  total flux cleaned = 0.00135506 Jy
! Component: 2200  -  total flux cleaned = 0.00135514 Jy
! Component: 2250  -  total flux cleaned = 0.00139264 Jy
! Component: 2300  -  total flux cleaned = 0.00146676 Jy
! Component: 2350  -  total flux cleaned = 0.0015218 Jy
! Component: 2400  -  total flux cleaned = 0.00155825 Jy
! Component: 2450  -  total flux cleaned = 0.00155825 Jy
! Component: 2500  -  total flux cleaned = 0.0016658 Jy
! Component: 2550  -  total flux cleaned = 0.00168371 Jy
! Component: 2600  -  total flux cleaned = 0.00170146 Jy
! Component: 2650  -  total flux cleaned = 0.00173655 Jy
! Component: 2700  -  total flux cleaned = 0.00166693 Jy
! Component: 2750  -  total flux cleaned = 0.00173616 Jy
! Component: 2800  -  total flux cleaned = 0.00178779 Jy
! Component: 2850  -  total flux cleaned = 0.00178774 Jy
! Component: 2900  -  total flux cleaned = 0.00183827 Jy
! Component: 2950  -  total flux cleaned = 0.00178815 Jy
! Component: 3000  -  total flux cleaned = 0.00180478 Jy
! Component: 3050  -  total flux cleaned = 0.00188748 Jy
! Component: 3100  -  total flux cleaned = 0.0018217 Jy
! Component: 3150  -  total flux cleaned = 0.00188707 Jy
! Component: 3200  -  total flux cleaned = 0.00188709 Jy
! Component: 3250  -  total flux cleaned = 0.00191935 Jy
! Component: 3300  -  total flux cleaned = 0.00191931 Jy
! Component: 3350  -  total flux cleaned = 0.00195117 Jy
! Component: 3400  -  total flux cleaned = 0.00201435 Jy
! Component: 3450  -  total flux cleaned = 0.00193566 Jy
! Component: 3500  -  total flux cleaned = 0.00198255 Jy
! Component: 3550  -  total flux cleaned = 0.00202915 Jy
! Component: 3600  -  total flux cleaned = 0.00199813 Jy
! Component: 3650  -  total flux cleaned = 0.00199797 Jy
! Component: 3700  -  total flux cleaned = 0.0019827 Jy
! Component: 3750  -  total flux cleaned = 0.0019373 Jy
! Component: 3800  -  total flux cleaned = 0.00195241 Jy
! Component: 3850  -  total flux cleaned = 0.00193755 Jy
! Component: 3900  -  total flux cleaned = 0.00196759 Jy
! Component: 3950  -  total flux cleaned = 0.00196769 Jy
! Component: 4000  -  total flux cleaned = 0.00201203 Jy
! Component: 4050  -  total flux cleaned = 0.00195333 Jy
! Total flux subtracted in 4096 components = 0.00195333 Jy
! Clean residual min=-0.000855 max=0.001137 Jy/beam
! Clean residual mean=-0.000001 rms=0.000264 Jy/beam
! Combined flux in latest and established models = 0.358402 Jy
keep
! Adding 279 model components to the UV plane model.
! The established model now contains 425 components and 0.358402 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J0039+4900_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.729 x 5.429 at -3.054 degrees (North through East)
! Clean map  min=-0.0015953  max=0.21364 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J0039+4900_S_map.fits
wmodel /image_prod/ug002_uva//J0039+4900_S_map.mod
! Writing 425 model components to file: /image_prod/ug002_uva//J0039+4900_S_map.mod
wobs   /image_prod/ug002_uva//J0039+4900_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J0039+4900_S_uvs.fits
wwins  /image_prod/ug002_uva//J0039+4900_S_map.win
! wwins: Wrote 6 windows to /image_prod/ug002_uva//J0039+4900_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.21364 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.0002618 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.367627 0.367627 0.735253 1.47051 2.94101 5.88203 11.7641 23.5281 47.0562 94.1124
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.213 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  816.045 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J0039+4900_S_dfm.log closed on Wed Mar  4 18:34:45 2020