! Started logfile: /image_prod/ug002_uva//J0034-0054_S_dfm.log on Wed Mar  4 18:31:34 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J0034-0054_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J0034-0054_S_uva.fits
! AN table 1: 30 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.873333 visibilities/baseline/integration-bin.
! Found source: J0034-0054
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 3537 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0034-0054_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.006533Jy  sigma=8.009870
! Fit after  self-cal, rms=0.931731Jy  sigma=7.389156
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.865 mas, bmaj=7.415 mas, bpa=-5.555 degrees
! Estimated noise=1.9552 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0532206 Jy
! Component: 100  -  total flux cleaned = 0.0678572 Jy
! Total flux subtracted in 100 components = 0.0678572 Jy
! Clean residual min=-0.004844 max=0.006350 Jy/beam
! Clean residual mean=0.000007 rms=0.001253 Jy/beam
! Combined flux in latest and established models = 0.0678573 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.0678573 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063958Jy  sigma=0.456689
! Fit after  self-cal, rms=0.063531Jy  sigma=0.453121
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.347 mas, bmaj=8.024 mas, bpa=-4.669 degrees
! Estimated noise=1.54795 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00840019 Jy
! Component: 100  -  total flux cleaned = 0.012601 Jy
! Component: 150  -  total flux cleaned = 0.0150964 Jy
! Component: 200  -  total flux cleaned = 0.0161464 Jy
! Total flux subtracted in 200 components = 0.0161464 Jy
! Clean residual min=-0.003310 max=0.003247 Jy/beam
! Clean residual mean=0.000006 rms=0.000796 Jy/beam
! Combined flux in latest and established models = 0.0840036 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 21 components and 0.0840036 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062624Jy  sigma=0.442318
! Fit after  self-cal, rms=0.062629Jy  sigma=0.442199
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.347 x 8.024 at -4.669 degrees (North through East)
! Clean map  min=-0.0032216  max=0.06909 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        0.94     HN        0.96     KP        1.01     
!   LA        1.00     MK        1.04     NL        0.95     OV        1.02     
!   PT        1.00     SC        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.36     FD        0.92     HN        1.03     KP        1.01     
!   LA        0.98     MK        1.03     NL        1.01     OV        0.95     
!   PT        1.00     SC        0.91     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.14     FD        0.95     HN        1.05     KP        1.00     
!   LA        0.99     MK        1.04     NL        0.96     OV        0.95     
!   PT        0.98     SC        0.96     
! 
! 
! Fit before self-cal, rms=0.062629Jy  sigma=0.442199
! Fit after  self-cal, rms=0.065514Jy  sigma=0.439952
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.362 mas, bmaj=8.081 mas, bpa=-4.105 degrees
! Estimated noise=1.54476 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000854997 Jy
! Component: 100  -  total flux cleaned = -0.0010837 Jy
! Component: 150  -  total flux cleaned = -0.0011213 Jy
! Component: 200  -  total flux cleaned = -0.00112091 Jy
! Total flux subtracted in 200 components = -0.00112091 Jy
! Clean residual min=-0.002688 max=0.003162 Jy/beam
! Clean residual mean=0.000005 rms=0.000687 Jy/beam
! Combined flux in latest and established models = 0.0828827 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 29 components and 0.0828827 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065442Jy  sigma=0.439550
! Fit after  self-cal, rms=0.065504Jy  sigma=0.439462
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065504Jy  sigma=0.439462
! Fit after  self-cal, rms=0.066937Jy  sigma=0.438017
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.375 mas, bmaj=8.106 mas, bpa=-4.042 degrees
! Estimated noise=1.54198 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0007125 Jy
! Component: 100  -  total flux cleaned = -0.000862137 Jy
! Component: 150  -  total flux cleaned = -0.000912686 Jy
! Component: 200  -  total flux cleaned = -0.000934839 Jy
! Total flux subtracted in 200 components = -0.000934839 Jy
! Clean residual min=-0.002518 max=0.002987 Jy/beam
! Clean residual mean=0.000003 rms=0.000638 Jy/beam
! Combined flux in latest and established models = 0.0819479 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 37 components and 0.0819479 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.066903Jy  sigma=0.437847
! Fit after  self-cal, rms=0.066933Jy  sigma=0.437792
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-66.5, 127.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00153949 Jy
! Component: 100  -  total flux cleaned = 0.00179049 Jy
! Component: 150  -  total flux cleaned = 0.00178959 Jy
! Component: 200  -  total flux cleaned = 0.00178715 Jy
! Total flux subtracted in 200 components = 0.00178715 Jy
! Clean residual min=-0.002357 max=0.002442 Jy/beam
! Clean residual mean=0.000005 rms=0.000589 Jy/beam
! Combined flux in latest and established models = 0.0837351 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 51 components and 0.083735 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.066794Jy  sigma=0.436724
! Fit after  self-cal, rms=0.066786Jy  sigma=0.436603
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.066786Jy  sigma=0.436603
! Fit after  self-cal, rms=0.067203Jy  sigma=0.436504
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.373 mas, bmaj=8.12 mas, bpa=-4.128 degrees
! Estimated noise=1.53343 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000423322 Jy
! Component: 100  -  total flux cleaned = 0.000386894 Jy
! Component: 150  -  total flux cleaned = 0.000351271 Jy
! Component: 200  -  total flux cleaned = 0.000288417 Jy
! Total flux subtracted in 200 components = 0.000288417 Jy
! Clean residual min=-0.002306 max=0.002335 Jy/beam
! Clean residual mean=0.000004 rms=0.000568 Jy/beam
! Combined flux in latest and established models = 0.0840235 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 59 components and 0.0840235 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.067150Jy  sigma=0.436175
! Fit after  self-cal, rms=0.067161Jy  sigma=0.436150
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.0897e-05 Jy
! Component: 100  -  total flux cleaned = 1.58098e-05 Jy
! Component: 150  -  total flux cleaned = -3.45641e-05 Jy
! Component: 200  -  total flux cleaned = -7.94225e-05 Jy
! Total flux subtracted in 200 components = -7.94225e-05 Jy
! Clean residual min=-0.002351 max=0.002287 Jy/beam
! Clean residual mean=0.000004 rms=0.000562 Jy/beam
! Combined flux in latest and established models = 0.083944 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 63 components and 0.083944 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.067137Jy  sigma=0.436008
! Fit after  self-cal, rms=0.067134Jy  sigma=0.436001
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.067134Jy  sigma=0.436001
! Fit after  self-cal, rms=0.067456Jy  sigma=0.435959
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.72 mas, bmaj=12.91 mas, bpa=-4.036 degrees
! Estimated noise=1.82572 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000172373 Jy
! Component: 100  -  total flux cleaned = -0.000190821 Jy
! Component: 150  -  total flux cleaned = -0.000207318 Jy
! Component: 200  -  total flux cleaned = -0.000237761 Jy
! Total flux subtracted in 200 components = -0.000237761 Jy
! Clean residual min=-0.002107 max=0.002270 Jy/beam
! Clean residual mean=0.000006 rms=0.000637 Jy/beam
! Combined flux in latest and established models = 0.0837063 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 71 components and 0.0837063 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.067451Jy  sigma=0.435924
! Fit after  self-cal, rms=0.067459Jy  sigma=0.435913
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.46056e-05 Jy
! Component: 100  -  total flux cleaned = -4.92887e-05 Jy
! Component: 150  -  total flux cleaned = -7.65732e-05 Jy
! Component: 200  -  total flux cleaned = -0.000101944 Jy
! Total flux subtracted in 200 components = -0.000101944 Jy
! Clean residual min=-0.002098 max=0.002237 Jy/beam
! Clean residual mean=0.000006 rms=0.000636 Jy/beam
! Combined flux in latest and established models = 0.0836043 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 73 components and 0.0836043 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.067458Jy  sigma=0.435910
! Fit after  self-cal, rms=0.067459Jy  sigma=0.435905
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.374 mas, bmaj=8.128 mas, bpa=-4.12 degrees
! Estimated noise=1.52958 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.374 x 8.128 at -4.12 degrees (North through East)
! Clean map  min=-0.0028391  max=0.068407 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.886 mas, bmaj=7.467 mas, bpa=-5.079 degrees
! Estimated noise=1.93788 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0529849 Jy
! Component: 100  -  total flux cleaned = 0.0676026 Jy
! Component: 150  -  total flux cleaned = 0.0744481 Jy
! Component: 200  -  total flux cleaned = 0.0778279 Jy
! Total flux subtracted in 200 components = 0.0778279 Jy
! Clean residual min=-0.003598 max=0.003316 Jy/beam
! Clean residual mean=0.000003 rms=0.000867 Jy/beam
! Combined flux in latest and established models = 0.0778279 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 21 model components to the UV plane model.
! The established model now contains 21 components and 0.0778279 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.374 mas, bmaj=8.128 mas, bpa=-4.12 degrees
! Estimated noise=1.52958 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00276898 Jy
! Component: 100  -  total flux cleaned = 0.00362035 Jy
! Component: 150  -  total flux cleaned = 0.00397538 Jy
! Component: 200  -  total flux cleaned = 0.00410154 Jy
! Total flux subtracted in 200 components = 0.00410154 Jy
! Clean residual min=-0.002457 max=0.002175 Jy/beam
! Clean residual mean=0.000004 rms=0.000615 Jy/beam
! Combined flux in latest and established models = 0.0819294 Jy
! Adding 15 model components to the UV plane model.
! The established model now contains 30 components and 0.0819294 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.72 mas, bmaj=12.91 mas, bpa=-4.036 degrees
! Estimated noise=1.82572 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00118844 Jy
! Component: 100  -  total flux cleaned = 0.00136563 Jy
! Component: 150  -  total flux cleaned = 0.00136799 Jy
! Component: 200  -  total flux cleaned = 0.0013226 Jy
! Total flux subtracted in 200 components = 0.0013226 Jy
! Clean residual min=-0.002095 max=0.002255 Jy/beam
! Clean residual mean=0.000007 rms=0.000651 Jy/beam
! Combined flux in latest and established models = 0.083252 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.22735e-07 Jy
! Component: 100  -  total flux cleaned = -1.94678e-05 Jy
! Component: 150  -  total flux cleaned = -1.93652e-05 Jy
! Component: 200  -  total flux cleaned = -3.60391e-05 Jy
! Total flux subtracted in 200 components = -3.60391e-05 Jy
! Clean residual min=-0.002068 max=0.002244 Jy/beam
! Clean residual mean=0.000006 rms=0.000645 Jy/beam
! Combined flux in latest and established models = 0.083216 Jy
! Adding 20 model components to the UV plane model.
! The established model now contains 46 components and 0.083216 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.374 mas, bmaj=8.128 mas, bpa=-4.12 degrees
! Estimated noise=1.52958 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000412868 Jy
! Component: 100  -  total flux cleaned = -0.000411045 Jy
! Component: 150  -  total flux cleaned = -0.000501401 Jy
! Component: 200  -  total flux cleaned = -0.000583015 Jy
! Total flux subtracted in 200 components = -0.000583015 Jy
! Clean residual min=-0.002523 max=0.002232 Jy/beam
! Clean residual mean=0.000003 rms=0.000576 Jy/beam
! Combined flux in latest and established models = 0.082633 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 57 components and 0.082633 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.067559Jy  sigma=0.436256
! Fit after  self-cal, rms=0.067558Jy  sigma=0.436216
wmodel J0034-0054_S_map.mod
! Writing 57 model components to file: J0034-0054_S_map.mod
wobs   J0034-0054_S_uvs.fits
! Writing UV FITS file: J0034-0054_S_uvs.fits
wwins  J0034-0054_S_map.win
! wwins: Wrote 2 windows to J0034-0054_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00087334 Jy
! Component: 100  -  total flux cleaned = -0.00133689 Jy
! Component: 150  -  total flux cleaned = -0.00152066 Jy
! Component: 200  -  total flux cleaned = -0.00162794 Jy
! Component: 250  -  total flux cleaned = -0.00183457 Jy
! Component: 300  -  total flux cleaned = -0.00196832 Jy
! Component: 350  -  total flux cleaned = -0.00209778 Jy
! Component: 400  -  total flux cleaned = -0.0020667 Jy
! Component: 450  -  total flux cleaned = -0.002036 Jy
! Component: 500  -  total flux cleaned = -0.00203534 Jy
! Component: 550  -  total flux cleaned = -0.00206382 Jy
! Component: 600  -  total flux cleaned = -0.00203498 Jy
! Component: 650  -  total flux cleaned = -0.00200722 Jy
! Component: 700  -  total flux cleaned = -0.00203441 Jy
! Component: 750  -  total flux cleaned = -0.00198027 Jy
! Component: 800  -  total flux cleaned = -0.00190199 Jy
! Component: 850  -  total flux cleaned = -0.00192852 Jy
! Component: 900  -  total flux cleaned = -0.00187796 Jy
! Component: 950  -  total flux cleaned = -0.00180395 Jy
! Component: 1000  -  total flux cleaned = -0.00173069 Jy
! Component: 1050  -  total flux cleaned = -0.00165893 Jy
! Component: 1100  -  total flux cleaned = -0.00161138 Jy
! Component: 1150  -  total flux cleaned = -0.00154163 Jy
! Component: 1200  -  total flux cleaned = -0.00145024 Jy
! Component: 1250  -  total flux cleaned = -0.00138258 Jy
! Component: 1300  -  total flux cleaned = -0.00138273 Jy
! Component: 1350  -  total flux cleaned = -0.00129452 Jy
! Component: 1400  -  total flux cleaned = -0.00127225 Jy
! Component: 1450  -  total flux cleaned = -0.0012295 Jy
! Component: 1500  -  total flux cleaned = -0.00125037 Jy
! Component: 1550  -  total flux cleaned = -0.00114598 Jy
! Component: 1600  -  total flux cleaned = -0.00116618 Jy
! Component: 1650  -  total flux cleaned = -0.000962827 Jy
! Component: 1700  -  total flux cleaned = -0.00100323 Jy
! Component: 1750  -  total flux cleaned = -0.00100302 Jy
! Component: 1800  -  total flux cleaned = -0.000924893 Jy
! Component: 1850  -  total flux cleaned = -0.000905817 Jy
! Component: 1900  -  total flux cleaned = -0.000867523 Jy
! Component: 1950  -  total flux cleaned = -0.000886566 Jy
! Component: 2000  -  total flux cleaned = -0.000868078 Jy
! Component: 2050  -  total flux cleaned = -0.000775804 Jy
! Component: 2100  -  total flux cleaned = -0.000794555 Jy
! Component: 2150  -  total flux cleaned = -0.000758246 Jy
! Component: 2200  -  total flux cleaned = -0.000758524 Jy
! Component: 2250  -  total flux cleaned = -0.000687461 Jy
! Component: 2300  -  total flux cleaned = -0.00063456 Jy
! Component: 2350  -  total flux cleaned = -0.000617301 Jy
! Component: 2400  -  total flux cleaned = -0.000548587 Jy
! Component: 2450  -  total flux cleaned = -0.000531885 Jy
! Component: 2500  -  total flux cleaned = -0.000464631 Jy
! Component: 2550  -  total flux cleaned = -0.000481096 Jy
! Component: 2600  -  total flux cleaned = -0.000414843 Jy
! Component: 2650  -  total flux cleaned = -0.000414785 Jy
! Component: 2700  -  total flux cleaned = -0.000414882 Jy
! Component: 2750  -  total flux cleaned = -0.000334448 Jy
! Component: 2800  -  total flux cleaned = -0.000398358 Jy
! Component: 2850  -  total flux cleaned = -0.000366733 Jy
! Component: 2900  -  total flux cleaned = -0.000319836 Jy
! Component: 2950  -  total flux cleaned = -0.00036645 Jy
! Component: 3000  -  total flux cleaned = -0.000381948 Jy
! Component: 3050  -  total flux cleaned = -0.000382109 Jy
! Component: 3100  -  total flux cleaned = -0.000336638 Jy
! Component: 3150  -  total flux cleaned = -0.000366914 Jy
! Component: 3200  -  total flux cleaned = -0.000396574 Jy
! Component: 3250  -  total flux cleaned = -0.00041153 Jy
! Component: 3300  -  total flux cleaned = -0.000426092 Jy
! Component: 3350  -  total flux cleaned = -0.000382482 Jy
! Component: 3400  -  total flux cleaned = -0.000440475 Jy
! Component: 3450  -  total flux cleaned = -0.00044047 Jy
! Component: 3500  -  total flux cleaned = -0.000440385 Jy
! Component: 3550  -  total flux cleaned = -0.000440475 Jy
! Component: 3600  -  total flux cleaned = -0.000482614 Jy
! Component: 3650  -  total flux cleaned = -0.000468804 Jy
! Component: 3700  -  total flux cleaned = -0.000482596 Jy
! Component: 3750  -  total flux cleaned = -0.000523902 Jy
! Component: 3800  -  total flux cleaned = -0.000551119 Jy
! Component: 3850  -  total flux cleaned = -0.000618843 Jy
! Component: 3900  -  total flux cleaned = -0.000591914 Jy
! Component: 3950  -  total flux cleaned = -0.000605443 Jy
! Component: 4000  -  total flux cleaned = -0.000632105 Jy
! Component: 4050  -  total flux cleaned = -0.000658444 Jy
! Total flux subtracted in 4096 components = -0.000671514 Jy
! Clean residual min=-0.000862 max=0.000940 Jy/beam
! Clean residual mean=-0.000001 rms=0.000231 Jy/beam
! Combined flux in latest and established models = 0.0819615 Jy
keep
! Adding 257 model components to the UV plane model.
! The established model now contains 314 components and 0.0819615 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J0034-0054_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.374 x 8.128 at -4.12 degrees (North through East)
! Clean map  min=-0.0024533  max=0.069504 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J0034-0054_S_map.fits
wmodel /image_prod/ug002_uva//J0034-0054_S_map.mod
! Writing 314 model components to file: /image_prod/ug002_uva//J0034-0054_S_map.mod
wobs   /image_prod/ug002_uva//J0034-0054_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J0034-0054_S_uvs.fits
wwins  /image_prod/ug002_uva//J0034-0054_S_map.win
! wwins: Wrote 3 windows to /image_prod/ug002_uva//J0034-0054_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0695044 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000228411 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.985885 0.985885 1.97177 3.94354 7.88708 15.7742 31.5483 63.0967
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.069 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  304.295 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J0034-0054_S_dfm.log closed on Wed Mar  4 18:31:38 2020