! Started logfile: /image_prod/ug002_uva//J0025-2227_S_dfm.log on Wed Mar 4 18:27:29 2020 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /image_prod/ug002_uva//J0025-2227_S_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0025-2227_S_uva.fits ! AN table 1: 40 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.978889 visibilities/baseline/integration-bin. ! Found source: J0025-2227 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 44 lines of history. ! ! Reading 5286 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0025-2227_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.015523Jy sigma=7.450225 ! Fit after self-cal, rms=0.839431Jy sigma=6.128871 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.59 mas, bmaj=7.133 mas, bpa=-3.492 degrees ! Estimated noise=1.8316 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.126223 Jy ! Component: 100 - total flux cleaned = 0.16073 Jy ! Total flux subtracted in 100 components = 0.16073 Jy ! Clean residual min=-0.009926 max=0.013387 Jy/beam ! Clean residual mean=-0.000023 rms=0.002718 Jy/beam ! Combined flux in latest and established models = 0.16073 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.16073 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.085070Jy sigma=0.565246 ! Fit after self-cal, rms=0.085020Jy sigma=0.564939 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.046 mas, bmaj=8.244 mas, bpa=-3.587 degrees ! Estimated noise=1.38143 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0145149 Jy ! Component: 100 - total flux cleaned = 0.0208419 Jy ! Component: 150 - total flux cleaned = 0.0241716 Jy ! Component: 200 - total flux cleaned = 0.0253239 Jy ! Total flux subtracted in 200 components = 0.0253239 Jy ! Clean residual min=-0.009608 max=0.009098 Jy/beam ! Clean residual mean=0.000003 rms=0.002259 Jy/beam ! Combined flux in latest and established models = 0.186054 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 24 components and 0.186054 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.082990Jy sigma=0.545495 ! Fit after self-cal, rms=0.082988Jy sigma=0.545401 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.046 x 8.244 at -3.587 degrees (North through East) ! Clean map min=-0.0091747 max=0.15853 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.04 HN 1.25 KP 1.05 ! LA 1.05 MK 0.97 NL 1.13 OV 0.66 ! PT 1.05 SC 1.05 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.02 HN 1.26 KP 1.04 ! LA 1.04 MK 0.96 NL 1.01 OV 0.94 ! PT 1.04 SC 0.95 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.07 HN 1.21 KP 1.03 ! LA 1.06 MK 1.00 NL 0.95 OV 0.64 ! PT 1.07 SC 0.99 ! ! ! Fit before self-cal, rms=0.082988Jy sigma=0.545401 ! Fit after self-cal, rms=0.079487Jy sigma=0.483903 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.052 mas, bmaj=8.182 mas, bpa=-3.308 degrees ! Estimated noise=1.38222 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (5.5, 7.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00498202 Jy ! Component: 100 - total flux cleaned = 0.00461561 Jy ! Component: 150 - total flux cleaned = 0.00416097 Jy ! Component: 200 - total flux cleaned = 0.00396564 Jy ! Total flux subtracted in 200 components = 0.00396564 Jy ! Clean residual min=-0.002728 max=0.003016 Jy/beam ! Clean residual mean=0.000002 rms=0.000777 Jy/beam ! Combined flux in latest and established models = 0.19002 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 42 components and 0.19002 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.079082Jy sigma=0.481638 ! Fit after self-cal, rms=0.079334Jy sigma=0.480500 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.079334Jy sigma=0.480500 ! Fit after self-cal, rms=0.078552Jy sigma=0.478660 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.046 mas, bmaj=8.165 mas, bpa=-3.197 degrees ! Estimated noise=1.38231 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00211906 Jy ! Component: 100 - total flux cleaned = 0.0023352 Jy ! Component: 150 - total flux cleaned = 0.00230098 Jy ! Component: 200 - total flux cleaned = 0.0021885 Jy ! Total flux subtracted in 200 components = 0.0021885 Jy ! Clean residual min=-0.002700 max=0.002644 Jy/beam ! Clean residual mean=0.000002 rms=0.000670 Jy/beam ! Combined flux in latest and established models = 0.192208 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 60 components and 0.192208 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.078439Jy sigma=0.478171 ! Fit after self-cal, rms=0.078424Jy sigma=0.478098 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000493393 Jy ! Component: 100 - total flux cleaned = 0.00042602 Jy ! Component: 150 - total flux cleaned = 0.000330771 Jy ! Component: 200 - total flux cleaned = 0.000270475 Jy ! Total flux subtracted in 200 components = 0.000270475 Jy ! Clean residual min=-0.002672 max=0.002615 Jy/beam ! Clean residual mean=0.000002 rms=0.000661 Jy/beam ! Combined flux in latest and established models = 0.192478 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 74 components and 0.192478 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.078383Jy sigma=0.477967 ! Fit after self-cal, rms=0.078382Jy sigma=0.477959 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.078382Jy sigma=0.477959 ! Fit after self-cal, rms=0.077498Jy sigma=0.476869 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.044 mas, bmaj=8.157 mas, bpa=-3.068 degrees ! Estimated noise=1.3803 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000857505 Jy ! Component: 100 - total flux cleaned = 0.00104185 Jy ! Component: 150 - total flux cleaned = 0.00117516 Jy ! Component: 200 - total flux cleaned = 0.0012713 Jy ! Total flux subtracted in 200 components = 0.0012713 Jy ! Clean residual min=-0.002728 max=0.002350 Jy/beam ! Clean residual mean=-0.000001 rms=0.000610 Jy/beam ! Combined flux in latest and established models = 0.19375 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 95 components and 0.19375 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.077468Jy sigma=0.476754 ! Fit after self-cal, rms=0.077457Jy sigma=0.476739 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000234234 Jy ! Component: 100 - total flux cleaned = 0.000256262 Jy ! Component: 150 - total flux cleaned = 0.000275809 Jy ! Component: 200 - total flux cleaned = 0.000275553 Jy ! Total flux subtracted in 200 components = 0.000275553 Jy ! Clean residual min=-0.002757 max=0.002319 Jy/beam ! Clean residual mean=-0.000001 rms=0.000606 Jy/beam ! Combined flux in latest and established models = 0.194025 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 102 components and 0.194025 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.077443Jy sigma=0.476696 ! Fit after self-cal, rms=0.077444Jy sigma=0.476693 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.077444Jy sigma=0.476693 ! Fit after self-cal, rms=0.077270Jy sigma=0.476665 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.702 mas, bmaj=18.78 mas, bpa=1.449 degrees ! Estimated noise=1.71246 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000562545 Jy ! Component: 100 - total flux cleaned = 0.000547076 Jy ! Component: 150 - total flux cleaned = 0.00053287 Jy ! Component: 200 - total flux cleaned = 0.00053254 Jy ! Total flux subtracted in 200 components = 0.00053254 Jy ! Clean residual min=-0.002606 max=0.002555 Jy/beam ! Clean residual mean=-0.000002 rms=0.000702 Jy/beam ! Combined flux in latest and established models = 0.194558 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 111 components and 0.194558 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.077263Jy sigma=0.476659 ! Fit after self-cal, rms=0.077259Jy sigma=0.476656 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.81191e-05 Jy ! Component: 100 - total flux cleaned = 1.80769e-05 Jy ! Component: 150 - total flux cleaned = 5.26512e-06 Jy ! Component: 200 - total flux cleaned = 5.29999e-06 Jy ! Total flux subtracted in 200 components = 5.29999e-06 Jy ! Clean residual min=-0.002614 max=0.002535 Jy/beam ! Clean residual mean=-0.000002 rms=0.000701 Jy/beam ! Combined flux in latest and established models = 0.194563 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 112 components and 0.194563 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.077255Jy sigma=0.476669 ! Fit after self-cal, rms=0.077257Jy sigma=0.476668 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.044 mas, bmaj=8.155 mas, bpa=-3.002 degrees ! Estimated noise=1.38086 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.044 x 8.155 at -3.002 degrees (North through East) ! Clean map min=-0.0027183 max=0.15885 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.596 mas, bmaj=7.079 mas, bpa=-2.844 degrees ! Estimated noise=1.81667 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.125046 Jy ! Component: 100 - total flux cleaned = 0.159027 Jy ! Component: 150 - total flux cleaned = 0.172745 Jy ! Component: 200 - total flux cleaned = 0.180096 Jy ! Total flux subtracted in 200 components = 0.180096 Jy ! Clean residual min=-0.003966 max=0.003764 Jy/beam ! Clean residual mean=-0.000010 rms=0.000965 Jy/beam ! Combined flux in latest and established models = 0.180096 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.180096 Jy ! Inverting map and beam ! Estimated beam: bmin=3.044 mas, bmaj=8.155 mas, bpa=-3.002 degrees ! Estimated noise=1.38086 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00595427 Jy ! Component: 100 - total flux cleaned = 0.00944402 Jy ! Component: 150 - total flux cleaned = 0.0114152 Jy ! Component: 200 - total flux cleaned = 0.012024 Jy ! Total flux subtracted in 200 components = 0.012024 Jy ! Clean residual min=-0.002841 max=0.002615 Jy/beam ! Clean residual mean=-0.000004 rms=0.000634 Jy/beam ! Combined flux in latest and established models = 0.19212 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 58 components and 0.19212 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.702 mas, bmaj=18.78 mas, bpa=1.449 degrees ! Estimated noise=1.71246 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00149512 Jy ! Component: 100 - total flux cleaned = 0.00167464 Jy ! Component: 150 - total flux cleaned = 0.00180952 Jy ! Component: 200 - total flux cleaned = 0.00193118 Jy ! Total flux subtracted in 200 components = 0.00193118 Jy ! Clean residual min=-0.002505 max=0.002557 Jy/beam ! Clean residual mean=-0.000003 rms=0.000710 Jy/beam ! Combined flux in latest and established models = 0.194051 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.59991e-05 Jy ! Component: 100 - total flux cleaned = 0.000107284 Jy ! Component: 150 - total flux cleaned = 0.000166272 Jy ! Component: 200 - total flux cleaned = 0.000202999 Jy ! Total flux subtracted in 200 components = 0.000202999 Jy ! Clean residual min=-0.002505 max=0.002552 Jy/beam ! Clean residual mean=-0.000002 rms=0.000706 Jy/beam ! Combined flux in latest and established models = 0.194254 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 92 components and 0.194254 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.044 mas, bmaj=8.155 mas, bpa=-3.002 degrees ! Estimated noise=1.38086 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000203405 Jy ! Component: 100 - total flux cleaned = 4.24106e-05 Jy ! Component: 150 - total flux cleaned = 0.000189852 Jy ! Component: 200 - total flux cleaned = 0.000266737 Jy ! Total flux subtracted in 200 components = 0.000266737 Jy ! Clean residual min=-0.002771 max=0.002334 Jy/beam ! Clean residual mean=-0.000001 rms=0.000603 Jy/beam ! Combined flux in latest and established models = 0.194521 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 113 components and 0.194521 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.077234Jy sigma=0.476673 ! Fit after self-cal, rms=0.077229Jy sigma=0.476645 wmodel J0025-2227_S_map.mod ! Writing 113 model components to file: J0025-2227_S_map.mod wobs J0025-2227_S_uvs.fits ! Writing UV FITS file: J0025-2227_S_uvs.fits wwins J0025-2227_S_map.win ! wwins: Wrote 2 windows to J0025-2227_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000648009 Jy ! Component: 100 - total flux cleaned = -0.000605581 Jy ! Component: 150 - total flux cleaned = -0.000488614 Jy ! Component: 200 - total flux cleaned = -0.000525295 Jy ! Component: 250 - total flux cleaned = -0.000632212 Jy ! Component: 300 - total flux cleaned = -0.000597555 Jy ! Component: 350 - total flux cleaned = -0.000563618 Jy ! Component: 400 - total flux cleaned = -0.000628184 Jy ! Component: 450 - total flux cleaned = -0.00072349 Jy ! Component: 500 - total flux cleaned = -0.000848651 Jy ! Component: 550 - total flux cleaned = -0.000910463 Jy ! Component: 600 - total flux cleaned = -0.00115051 Jy ! Component: 650 - total flux cleaned = -0.00126768 Jy ! Component: 700 - total flux cleaned = -0.00135392 Jy ! Component: 750 - total flux cleaned = -0.0014392 Jy ! Component: 800 - total flux cleaned = -0.0014396 Jy ! Component: 850 - total flux cleaned = -0.00146749 Jy ! Component: 900 - total flux cleaned = -0.00146732 Jy ! Component: 950 - total flux cleaned = -0.00146736 Jy ! Component: 1000 - total flux cleaned = -0.00138924 Jy ! Component: 1050 - total flux cleaned = -0.00144083 Jy ! Component: 1100 - total flux cleaned = -0.001441 Jy ! Component: 1150 - total flux cleaned = -0.00156571 Jy ! Component: 1200 - total flux cleaned = -0.00159012 Jy ! Component: 1250 - total flux cleaned = -0.0016633 Jy ! Component: 1300 - total flux cleaned = -0.00173515 Jy ! Component: 1350 - total flux cleaned = -0.00180633 Jy ! Component: 1400 - total flux cleaned = -0.00178306 Jy ! Component: 1450 - total flux cleaned = -0.00189847 Jy ! Component: 1500 - total flux cleaned = -0.00196664 Jy ! Component: 1550 - total flux cleaned = -0.00196691 Jy ! Component: 1600 - total flux cleaned = -0.00205584 Jy ! Component: 1650 - total flux cleaned = -0.00212191 Jy ! Component: 1700 - total flux cleaned = -0.0021652 Jy ! Component: 1750 - total flux cleaned = -0.00225065 Jy ! Component: 1800 - total flux cleaned = -0.00225061 Jy ! Component: 1850 - total flux cleaned = -0.00216665 Jy ! Component: 1900 - total flux cleaned = -0.00227027 Jy ! Component: 1950 - total flux cleaned = -0.00220831 Jy ! Component: 2000 - total flux cleaned = -0.00218807 Jy ! Component: 2050 - total flux cleaned = -0.00228889 Jy ! Component: 2100 - total flux cleaned = -0.00226886 Jy ! Component: 2150 - total flux cleaned = -0.00222928 Jy ! Component: 2200 - total flux cleaned = -0.00220965 Jy ! Component: 2250 - total flux cleaned = -0.00220973 Jy ! Component: 2300 - total flux cleaned = -0.00224839 Jy ! Component: 2350 - total flux cleaned = -0.00221019 Jy ! Component: 2400 - total flux cleaned = -0.00221017 Jy ! Component: 2450 - total flux cleaned = -0.00224785 Jy ! Component: 2500 - total flux cleaned = -0.00226593 Jy ! Component: 2550 - total flux cleaned = -0.00215529 Jy ! Component: 2600 - total flux cleaned = -0.00221012 Jy ! Component: 2650 - total flux cleaned = -0.0021557 Jy ! Component: 2700 - total flux cleaned = -0.00220956 Jy ! Component: 2750 - total flux cleaned = -0.00222755 Jy ! Component: 2800 - total flux cleaned = -0.00217448 Jy ! Component: 2850 - total flux cleaned = -0.00220944 Jy ! Component: 2900 - total flux cleaned = -0.00215687 Jy ! Component: 2950 - total flux cleaned = -0.00208775 Jy ! Component: 3000 - total flux cleaned = -0.00207049 Jy ! Component: 3050 - total flux cleaned = -0.00201943 Jy ! Component: 3100 - total flux cleaned = -0.00203624 Jy ! Component: 3150 - total flux cleaned = -0.00200266 Jy ! Component: 3200 - total flux cleaned = -0.00198603 Jy ! Component: 3250 - total flux cleaned = -0.00195308 Jy ! Component: 3300 - total flux cleaned = -0.00196947 Jy ! Component: 3350 - total flux cleaned = -0.00185519 Jy ! Component: 3400 - total flux cleaned = -0.00180653 Jy ! Component: 3450 - total flux cleaned = -0.00182258 Jy ! Component: 3500 - total flux cleaned = -0.00175835 Jy ! Component: 3550 - total flux cleaned = -0.00169483 Jy ! Component: 3600 - total flux cleaned = -0.00159997 Jy ! Component: 3650 - total flux cleaned = -0.00160004 Jy ! Component: 3700 - total flux cleaned = -0.00155321 Jy ! Component: 3750 - total flux cleaned = -0.00155318 Jy ! Component: 3800 - total flux cleaned = -0.00155319 Jy ! Component: 3850 - total flux cleaned = -0.00144591 Jy ! Component: 3900 - total flux cleaned = -0.00144586 Jy ! Component: 3950 - total flux cleaned = -0.00138539 Jy ! Component: 4000 - total flux cleaned = -0.00132519 Jy ! Component: 4050 - total flux cleaned = -0.0013402 Jy ! Total flux subtracted in 4096 components = -0.00132538 Jy ! Clean residual min=-0.000886 max=0.000743 Jy/beam ! Clean residual mean=0.000005 rms=0.000272 Jy/beam ! Combined flux in latest and established models = 0.193195 Jy keep ! Adding 294 model components to the UV plane model. ! The established model now contains 407 components and 0.193195 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0025-2227_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.044 x 8.155 at -3.002 degrees (North through East) ! Clean map min=-0.0023972 max=0.16028 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0025-2227_S_map.fits wmodel /image_prod/ug002_uva//J0025-2227_S_map.mod ! Writing 407 model components to file: /image_prod/ug002_uva//J0025-2227_S_map.mod wobs /image_prod/ug002_uva//J0025-2227_S_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0025-2227_S_uvs.fits wwins /image_prod/ug002_uva//J0025-2227_S_map.win ! wwins: Wrote 3 windows to /image_prod/ug002_uva//J0025-2227_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.160283 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000266685 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.499151 0.499151 0.998302 1.9966 3.99321 7.98642 15.9728 31.9457 63.8913 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.16 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 601.02 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0025-2227_S_dfm.log closed on Wed Mar 4 18:27:33 2020