! Started logfile: /image_prod/ug002_uva//J0024-0811_S_dfm.log on Wed Mar 4 18:26:57 2020 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /image_prod/ug002_uva//J0024-0811_S_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0024-0811_S_uva.fits ! AN table 1: 50 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.983889 visibilities/baseline/integration-bin. ! Found source: J0024-0811 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 40 lines of history. ! ! Reading 5313 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0024-0811_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=1.004568Jy sigma=7.612367 ! Fit after self-cal, rms=0.924854Jy sigma=7.006992 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.602 mas, bmaj=7.206 mas, bpa=-3.951 degrees ! Estimated noise=1.99839 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0580397 Jy ! Component: 100 - total flux cleaned = 0.0736704 Jy ! Total flux subtracted in 100 components = 0.0736704 Jy ! Clean residual min=-0.004993 max=0.007270 Jy/beam ! Clean residual mean=-0.000001 rms=0.001601 Jy/beam ! Combined flux in latest and established models = 0.0736704 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0736704 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.072105Jy sigma=0.495086 ! Fit after self-cal, rms=0.071605Jy sigma=0.491097 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.043 mas, bmaj=7.739 mas, bpa=-3.671 degrees ! Estimated noise=1.3289 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.011749 Jy ! Component: 100 - total flux cleaned = 0.0180107 Jy ! Component: 150 - total flux cleaned = 0.0218611 Jy ! Component: 200 - total flux cleaned = 0.0242477 Jy ! Total flux subtracted in 200 components = 0.0242477 Jy ! Clean residual min=-0.003708 max=0.004539 Jy/beam ! Clean residual mean=0.000001 rms=0.000966 Jy/beam ! Combined flux in latest and established models = 0.0979181 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 42 components and 0.0979181 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.069822Jy sigma=0.474072 ! Fit after self-cal, rms=0.069815Jy sigma=0.473669 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.043 x 7.739 at -3.671 degrees (North through East) ! Clean map min=-0.0036645 max=0.077308 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.94 HN 1.04 KP 0.94 ! LA 0.95 MK 0.88 NL 1.02 OV 0.96 ! SC 1.07 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.96 HN 1.03 KP 0.97 ! LA 0.97 MK 0.95 NL 0.92 OV 0.92 ! SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.97 HN 1.56 KP 1.00 ! LA 0.96 MK 0.95 NL 1.23 OV 0.93 ! SC 1.02 ! ! ! Fit before self-cal, rms=0.069815Jy sigma=0.473669 ! Fit after self-cal, rms=0.071926Jy sigma=0.465000 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.045 mas, bmaj=7.809 mas, bpa=-4.182 degrees ! Estimated noise=1.3173 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00103925 Jy ! Component: 100 - total flux cleaned = 0.0010719 Jy ! Component: 150 - total flux cleaned = 0.00115638 Jy ! Component: 200 - total flux cleaned = 0.00115695 Jy ! Total flux subtracted in 200 components = 0.00115695 Jy ! Clean residual min=-0.003035 max=0.002744 Jy/beam ! Clean residual mean=-0.000005 rms=0.000722 Jy/beam ! Combined flux in latest and established models = 0.099075 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 50 components and 0.099075 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.071873Jy sigma=0.464757 ! Fit after self-cal, rms=0.072012Jy sigma=0.464481 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.072012Jy sigma=0.464481 ! Fit after self-cal, rms=0.073442Jy sigma=0.461372 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.031 mas, bmaj=7.799 mas, bpa=-3.879 degrees ! Estimated noise=1.31539 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000119068 Jy ! Component: 100 - total flux cleaned = 7.06185e-05 Jy ! Component: 150 - total flux cleaned = 5.0597e-05 Jy ! Component: 200 - total flux cleaned = 6.75644e-05 Jy ! Total flux subtracted in 200 components = 6.75644e-05 Jy ! Clean residual min=-0.002873 max=0.002318 Jy/beam ! Clean residual mean=-0.000002 rms=0.000596 Jy/beam ! Combined flux in latest and established models = 0.0991426 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 54 components and 0.0991426 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.073424Jy sigma=0.461276 ! Fit after self-cal, rms=0.073517Jy sigma=0.461177 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.35631e-05 Jy ! Component: 100 - total flux cleaned = -0.000113156 Jy ! Component: 150 - total flux cleaned = -0.000112599 Jy ! Component: 200 - total flux cleaned = -0.000112331 Jy ! Total flux subtracted in 200 components = -0.000112331 Jy ! Clean residual min=-0.002852 max=0.002324 Jy/beam ! Clean residual mean=-0.000002 rms=0.000594 Jy/beam ! Combined flux in latest and established models = 0.0990303 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 54 components and 0.0990303 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.073508Jy sigma=0.461130 ! Fit after self-cal, rms=0.073522Jy sigma=0.461118 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.073522Jy sigma=0.461118 ! Fit after self-cal, rms=0.073406Jy sigma=0.461105 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.025 mas, bmaj=7.779 mas, bpa=-3.79 degrees ! Estimated noise=1.31152 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.14918e-07 Jy ! Component: 100 - total flux cleaned = 2.87892e-05 Jy ! Component: 150 - total flux cleaned = 4.09839e-05 Jy ! Component: 200 - total flux cleaned = 5.14941e-05 Jy ! Total flux subtracted in 200 components = 5.14941e-05 Jy ! Clean residual min=-0.002818 max=0.002300 Jy/beam ! Clean residual mean=-0.000002 rms=0.000590 Jy/beam ! Combined flux in latest and established models = 0.0990817 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 54 components and 0.0990818 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.073399Jy sigma=0.461072 ! Fit after self-cal, rms=0.073419Jy sigma=0.461065 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.30051e-05 Jy ! Component: 100 - total flux cleaned = -7.41795e-05 Jy ! Component: 150 - total flux cleaned = -7.40914e-05 Jy ! Component: 200 - total flux cleaned = -7.37119e-05 Jy ! Total flux subtracted in 200 components = -7.37119e-05 Jy ! Clean residual min=-0.002800 max=0.002307 Jy/beam ! Clean residual mean=-0.000002 rms=0.000589 Jy/beam ! Combined flux in latest and established models = 0.099008 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 56 components and 0.099008 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.073415Jy sigma=0.461050 ! Fit after self-cal, rms=0.073426Jy sigma=0.461045 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.073426Jy sigma=0.461045 ! Fit after self-cal, rms=0.073170Jy sigma=0.461037 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.081 mas, bmaj=13.08 mas, bpa=-0.2304 degrees ! Estimated noise=1.64024 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000327845 Jy ! Component: 100 - total flux cleaned = 0.000359882 Jy ! Component: 150 - total flux cleaned = 0.000396906 Jy ! Component: 200 - total flux cleaned = 0.000416176 Jy ! Total flux subtracted in 200 components = 0.000416176 Jy ! Clean residual min=-0.002651 max=0.001975 Jy/beam ! Clean residual mean=-0.000004 rms=0.000661 Jy/beam ! Combined flux in latest and established models = 0.0994242 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 62 components and 0.0994242 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.073169Jy sigma=0.461071 ! Fit after self-cal, rms=0.073166Jy sigma=0.461045 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.51625e-05 Jy ! Component: 100 - total flux cleaned = 3.74584e-05 Jy ! Component: 150 - total flux cleaned = 6.80459e-05 Jy ! Component: 200 - total flux cleaned = 8.39214e-05 Jy ! Total flux subtracted in 200 components = 8.39214e-05 Jy ! Clean residual min=-0.002642 max=0.001972 Jy/beam ! Clean residual mean=-0.000004 rms=0.000659 Jy/beam ! Combined flux in latest and established models = 0.0995081 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 64 components and 0.0995081 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.073167Jy sigma=0.461087 ! Fit after self-cal, rms=0.073160Jy sigma=0.461068 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.021 mas, bmaj=7.762 mas, bpa=-3.695 degrees ! Estimated noise=1.30786 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.021 x 7.762 at -3.695 degrees (North through East) ! Clean map min=-0.0026211 max=0.075785 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.577 mas, bmaj=7.191 mas, bpa=-3.876 degrees ! Estimated noise=1.99951 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0586322 Jy ! Component: 100 - total flux cleaned = 0.0755859 Jy ! Component: 150 - total flux cleaned = 0.0846052 Jy ! Component: 200 - total flux cleaned = 0.0897856 Jy ! Total flux subtracted in 200 components = 0.0897856 Jy ! Clean residual min=-0.003722 max=0.004034 Jy/beam ! Clean residual mean=-0.000001 rms=0.000952 Jy/beam ! Combined flux in latest and established models = 0.0897857 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.0897857 Jy ! Inverting map and beam ! Estimated beam: bmin=3.021 mas, bmaj=7.762 mas, bpa=-3.695 degrees ! Estimated noise=1.30786 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00398482 Jy ! Component: 100 - total flux cleaned = 0.00618184 Jy ! Component: 150 - total flux cleaned = 0.00749474 Jy ! Component: 200 - total flux cleaned = 0.0082877 Jy ! Total flux subtracted in 200 components = 0.0082877 Jy ! Clean residual min=-0.002737 max=0.002385 Jy/beam ! Clean residual mean=-0.000002 rms=0.000599 Jy/beam ! Combined flux in latest and established models = 0.0980734 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 38 components and 0.0980733 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.081 mas, bmaj=13.08 mas, bpa=-0.2304 degrees ! Estimated noise=1.64024 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000997814 Jy ! Component: 100 - total flux cleaned = 0.00119148 Jy ! Component: 150 - total flux cleaned = 0.00123901 Jy ! Component: 200 - total flux cleaned = 0.00128231 Jy ! Total flux subtracted in 200 components = 0.00128231 Jy ! Clean residual min=-0.002652 max=0.001971 Jy/beam ! Clean residual mean=-0.000004 rms=0.000662 Jy/beam ! Combined flux in latest and established models = 0.0993557 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.93175e-05 Jy ! Component: 100 - total flux cleaned = 7.5563e-05 Jy ! Component: 150 - total flux cleaned = 0.000116557 Jy ! Component: 200 - total flux cleaned = 0.000131345 Jy ! Total flux subtracted in 200 components = 0.000131345 Jy ! Clean residual min=-0.002648 max=0.001975 Jy/beam ! Clean residual mean=-0.000004 rms=0.000659 Jy/beam ! Combined flux in latest and established models = 0.099487 Jy ! Adding 8 model components to the UV plane model. ! The established model now contains 42 components and 0.099487 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.021 mas, bmaj=7.762 mas, bpa=-3.695 degrees ! Estimated noise=1.30786 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000248997 Jy ! Component: 100 - total flux cleaned = -0.000370391 Jy ! Component: 150 - total flux cleaned = -0.000397962 Jy ! Component: 200 - total flux cleaned = -0.00039721 Jy ! Total flux subtracted in 200 components = -0.00039721 Jy ! Clean residual min=-0.002797 max=0.002381 Jy/beam ! Clean residual mean=-0.000002 rms=0.000591 Jy/beam ! Combined flux in latest and established models = 0.0990898 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 51 components and 0.0990898 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.073168Jy sigma=0.461116 ! Fit after self-cal, rms=0.073133Jy sigma=0.461100 wmodel J0024-0811_S_map.mod ! Writing 51 model components to file: J0024-0811_S_map.mod wobs J0024-0811_S_uvs.fits ! Writing UV FITS file: J0024-0811_S_uvs.fits wwins J0024-0811_S_map.win ! wwins: Wrote 1 windows to J0024-0811_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000640864 Jy ! Component: 100 - total flux cleaned = -0.000852087 Jy ! Component: 150 - total flux cleaned = -0.000973483 Jy ! Component: 200 - total flux cleaned = -0.000898263 Jy ! Component: 250 - total flux cleaned = -0.000860817 Jy ! Component: 300 - total flux cleaned = -0.000824721 Jy ! Component: 350 - total flux cleaned = -0.000824339 Jy ! Component: 400 - total flux cleaned = -0.000791341 Jy ! Component: 450 - total flux cleaned = -0.000759881 Jy ! Component: 500 - total flux cleaned = -0.00066672 Jy ! Component: 550 - total flux cleaned = -0.000577032 Jy ! Component: 600 - total flux cleaned = -0.000519183 Jy ! Component: 650 - total flux cleaned = -0.000546921 Jy ! Component: 700 - total flux cleaned = -0.000546703 Jy ! Component: 750 - total flux cleaned = -0.000492948 Jy ! Component: 800 - total flux cleaned = -0.000467394 Jy ! Component: 850 - total flux cleaned = -0.000544902 Jy ! Component: 900 - total flux cleaned = -0.000519244 Jy ! Component: 950 - total flux cleaned = -0.000569337 Jy ! Component: 1000 - total flux cleaned = -0.000642588 Jy ! Component: 1050 - total flux cleaned = -0.000690527 Jy ! Component: 1100 - total flux cleaned = -0.000784149 Jy ! Component: 1150 - total flux cleaned = -0.000806834 Jy ! Component: 1200 - total flux cleaned = -0.000897734 Jy ! Component: 1250 - total flux cleaned = -0.000987378 Jy ! Component: 1300 - total flux cleaned = -0.00111959 Jy ! Component: 1350 - total flux cleaned = -0.00118496 Jy ! Component: 1400 - total flux cleaned = -0.00137774 Jy ! Component: 1450 - total flux cleaned = -0.00148308 Jy ! Component: 1500 - total flux cleaned = -0.00152485 Jy ! Component: 1550 - total flux cleaned = -0.00166892 Jy ! Component: 1600 - total flux cleaned = -0.00177046 Jy ! Component: 1650 - total flux cleaned = -0.00181072 Jy ! Component: 1700 - total flux cleaned = -0.00189024 Jy ! Component: 1750 - total flux cleaned = -0.00196877 Jy ! Component: 1800 - total flux cleaned = -0.00206579 Jy ! Component: 1850 - total flux cleaned = -0.00216156 Jy ! Component: 1900 - total flux cleaned = -0.00229404 Jy ! Component: 1950 - total flux cleaned = -0.00235031 Jy ! Component: 2000 - total flux cleaned = -0.00242453 Jy ! Component: 2050 - total flux cleaned = -0.0025531 Jy ! Component: 2100 - total flux cleaned = -0.00262576 Jy ! Component: 2150 - total flux cleaned = -0.00275163 Jy ! Component: 2200 - total flux cleaned = -0.00282307 Jy ! Component: 2250 - total flux cleaned = -0.00294644 Jy ! Component: 2300 - total flux cleaned = -0.00306889 Jy ! Component: 2350 - total flux cleaned = -0.00320747 Jy ! Component: 2400 - total flux cleaned = -0.00329335 Jy ! Component: 2450 - total flux cleaned = -0.00339527 Jy ! Component: 2500 - total flux cleaned = -0.00349663 Jy ! Component: 2550 - total flux cleaned = -0.00361348 Jy ! Component: 2600 - total flux cleaned = -0.00372927 Jy ! Component: 2650 - total flux cleaned = -0.00386041 Jy ! Component: 2700 - total flux cleaned = -0.0038281 Jy ! Component: 2750 - total flux cleaned = -0.00400567 Jy ! Component: 2800 - total flux cleaned = -0.00406962 Jy ! Component: 2850 - total flux cleaned = -0.00418078 Jy ! Component: 2900 - total flux cleaned = -0.00427532 Jy ! Component: 2950 - total flux cleaned = -0.00440044 Jy ! Component: 3000 - total flux cleaned = -0.00452468 Jy ! Component: 3050 - total flux cleaned = -0.00460175 Jy ! Component: 3100 - total flux cleaned = -0.00470894 Jy ! Component: 3150 - total flux cleaned = -0.00478483 Jy ! Component: 3200 - total flux cleaned = -0.00487539 Jy ! Component: 3250 - total flux cleaned = -0.00492052 Jy ! Component: 3300 - total flux cleaned = -0.00502502 Jy ! Component: 3350 - total flux cleaned = -0.00515834 Jy ! Component: 3400 - total flux cleaned = -0.00520247 Jy ! Component: 3450 - total flux cleaned = -0.0053049 Jy ! Component: 3500 - total flux cleaned = -0.00536304 Jy ! Component: 3550 - total flux cleaned = -0.00544972 Jy ! Component: 3600 - total flux cleaned = -0.00553583 Jy ! Component: 3650 - total flux cleaned = -0.00553586 Jy ! Component: 3700 - total flux cleaned = -0.00562112 Jy ! Component: 3750 - total flux cleaned = -0.00566343 Jy ! Component: 3800 - total flux cleaned = -0.0057898 Jy ! Component: 3850 - total flux cleaned = -0.00581773 Jy ! Component: 3900 - total flux cleaned = -0.00591496 Jy ! Component: 3950 - total flux cleaned = -0.00597021 Jy ! Component: 4000 - total flux cleaned = -0.00595651 Jy ! Component: 4050 - total flux cleaned = -0.00606585 Jy ! Total flux subtracted in 4096 components = -0.0060932 Jy ! Clean residual min=-0.000796 max=0.000708 Jy/beam ! Clean residual mean=-0.000001 rms=0.000235 Jy/beam ! Combined flux in latest and established models = 0.0929966 Jy keep ! Adding 251 model components to the UV plane model. ! The established model now contains 302 components and 0.0929966 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0024-0811_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.021 x 7.762 at -3.695 degrees (North through East) ! Clean map min=-0.0018269 max=0.075876 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0024-0811_S_map.fits wmodel /image_prod/ug002_uva//J0024-0811_S_map.mod ! Writing 302 model components to file: /image_prod/ug002_uva//J0024-0811_S_map.mod wobs /image_prod/ug002_uva//J0024-0811_S_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0024-0811_S_uvs.fits wwins /image_prod/ug002_uva//J0024-0811_S_map.win ! wwins: Wrote 2 windows to /image_prod/ug002_uva//J0024-0811_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0758763 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000227259 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.89854 0.89854 1.79708 3.59416 7.18832 14.3766 28.7533 57.5065 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.075 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 333.875 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0024-0811_S_dfm.log closed on Wed Mar 4 18:27:01 2020