! Started logfile: /image_prod/ug002_uva//J0019-2205_S_b_dfm.log on Wed Mar  4 18:24:40 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J0019-2205_S_b_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J0019-2205_S_b_uva.fits
! AN table 1: 60 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.784259 visibilities/baseline/integration-bin.
! Found source: J0019-2205
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 5082 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0019-2205_S_b]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.009294Jy  sigma=6.796502
! Fit after  self-cal, rms=0.900476Jy  sigma=5.969254
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.393 mas, bmaj=12.46 mas, bpa=11.4 degrees
! Estimated noise=2.05336 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0862734 Jy
! Component: 100  -  total flux cleaned = 0.109792 Jy
! Total flux subtracted in 100 components = 0.109792 Jy
! Clean residual min=-0.007053 max=0.012256 Jy/beam
! Clean residual mean=-0.000001 rms=0.002288 Jy/beam
! Combined flux in latest and established models = 0.109792 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.109792 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.081674Jy  sigma=0.482662
! Fit after  self-cal, rms=0.081276Jy  sigma=0.481285
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.935 mas, bmaj=12.67 mas, bpa=9.567 degrees
! Estimated noise=1.53732 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0119364 Jy
! Component: 100  -  total flux cleaned = 0.0176773 Jy
! Component: 150  -  total flux cleaned = 0.0196648 Jy
! Component: 200  -  total flux cleaned = 0.0204871 Jy
! Total flux subtracted in 200 components = 0.0204871 Jy
! Clean residual min=-0.005611 max=0.007979 Jy/beam
! Clean residual mean=0.000010 rms=0.001765 Jy/beam
! Combined flux in latest and established models = 0.130279 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 22 components and 0.130279 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.079752Jy  sigma=0.467755
! Fit after  self-cal, rms=0.079638Jy  sigma=0.467562
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.935 x 12.67 at 9.567 degrees (North through East)
! Clean map  min=-0.0055029  max=0.090241 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.75     FD        0.95     HN        1.04     KP        0.97     
!   LA        0.99     NL        0.99     OV        0.89     PT        1.00     
!   SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.86     FD        0.96     HN        1.01     KP        1.02     
!   LA        1.03     NL        0.91     OV        0.92     PT        1.00     
!   SC        0.81     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.74     FD        0.97     HN        1.10     KP        1.02     
!   LA        0.99     NL        0.86     OV        1.00     PT        1.04     
!   SC        1.03     
! 
! 
! Fit before self-cal, rms=0.079638Jy  sigma=0.467562
! Fit after  self-cal, rms=0.098980Jy  sigma=0.454263
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.891 mas, bmaj=12.56 mas, bpa=9.601 degrees
! Estimated noise=1.57602 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000188926 Jy
! Component: 100  -  total flux cleaned = 0.000188921 Jy
! Component: 150  -  total flux cleaned = 8.72566e-05 Jy
! Component: 200  -  total flux cleaned = -0.000171185 Jy
! Total flux subtracted in 200 components = -0.000171185 Jy
! Clean residual min=-0.004495 max=0.003936 Jy/beam
! Clean residual mean=0.000010 rms=0.001053 Jy/beam
! Combined flux in latest and established models = 0.130108 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 32 components and 0.130108 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.098784Jy  sigma=0.452080
! Fit after  self-cal, rms=0.099142Jy  sigma=0.451753
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.099142Jy  sigma=0.451753
! Fit after  self-cal, rms=0.103344Jy  sigma=0.449782
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.877 mas, bmaj=12.54 mas, bpa=9.62 degrees
! Estimated noise=1.57127 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000313387 Jy
! Component: 100  -  total flux cleaned = 0.000244239 Jy
! Component: 150  -  total flux cleaned = 0.000121746 Jy
! Component: 200  -  total flux cleaned = 1.47593e-05 Jy
! Total flux subtracted in 200 components = 1.47593e-05 Jy
! Clean residual min=-0.003652 max=0.003286 Jy/beam
! Clean residual mean=0.000011 rms=0.000872 Jy/beam
! Combined flux in latest and established models = 0.130123 Jy
selfcal
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 34 components and 0.130123 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.103283Jy  sigma=0.448914
! Fit after  self-cal, rms=0.103367Jy  sigma=0.448867
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.19131e-05 Jy
! Component: 100  -  total flux cleaned = -0.000170505 Jy
! Component: 150  -  total flux cleaned = -0.000341877 Jy
! Component: 200  -  total flux cleaned = -0.000459372 Jy
! Total flux subtracted in 200 components = -0.000459372 Jy
! Clean residual min=-0.003451 max=0.003213 Jy/beam
! Clean residual mean=0.000011 rms=0.000841 Jy/beam
! Combined flux in latest and established models = 0.129663 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 44 components and 0.129663 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.103345Jy  sigma=0.448477
! Fit after  self-cal, rms=0.103355Jy  sigma=0.448470
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.103355Jy  sigma=0.448470
! Fit after  self-cal, rms=0.105603Jy  sigma=0.448101
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.87 mas, bmaj=12.51 mas, bpa=9.595 degrees
! Estimated noise=1.56361 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000155793 Jy
! Component: 100  -  total flux cleaned = -0.000234939 Jy
! Component: 150  -  total flux cleaned = -0.000268177 Jy
! Component: 200  -  total flux cleaned = -0.000297504 Jy
! Total flux subtracted in 200 components = -0.000297504 Jy
! Clean residual min=-0.003261 max=0.002869 Jy/beam
! Clean residual mean=0.000012 rms=0.000788 Jy/beam
! Combined flux in latest and established models = 0.129366 Jy
selfcal
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 45 components and 0.129366 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.105586Jy  sigma=0.447777
! Fit after  self-cal, rms=0.105636Jy  sigma=0.447755
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.34414e-06 Jy
! Component: 100  -  total flux cleaned = -4.18049e-05 Jy
! Component: 150  -  total flux cleaned = -0.000137151 Jy
! Component: 200  -  total flux cleaned = -0.000202843 Jy
! Total flux subtracted in 200 components = -0.000202843 Jy
! Clean residual min=-0.003247 max=0.002821 Jy/beam
! Clean residual mean=0.000012 rms=0.000776 Jy/beam
! Combined flux in latest and established models = 0.129163 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 52 components and 0.129163 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.105628Jy  sigma=0.447626
! Fit after  self-cal, rms=0.105633Jy  sigma=0.447621
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.105633Jy  sigma=0.447621
! Fit after  self-cal, rms=0.107193Jy  sigma=0.447561
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.368 mas, bmaj=17.61 mas, bpa=-1.49 degrees
! Estimated noise=1.82643 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000364095 Jy
! Component: 100  -  total flux cleaned = 0.000201473 Jy
! Component: 150  -  total flux cleaned = 0.000116185 Jy
! Component: 200  -  total flux cleaned = 8.01711e-05 Jy
! Total flux subtracted in 200 components = 8.01711e-05 Jy
! Clean residual min=-0.003083 max=0.002579 Jy/beam
! Clean residual mean=0.000018 rms=0.000870 Jy/beam
! Combined flux in latest and established models = 0.129243 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 58 components and 0.129243 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.107193Jy  sigma=0.447490
! Fit after  self-cal, rms=0.107223Jy  sigma=0.447457
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.68121e-05 Jy
! Component: 100  -  total flux cleaned = -6.15929e-05 Jy
! Component: 150  -  total flux cleaned = -9.07983e-05 Jy
! Component: 200  -  total flux cleaned = -0.000117429 Jy
! Total flux subtracted in 200 components = -0.000117429 Jy
! Clean residual min=-0.003120 max=0.002587 Jy/beam
! Clean residual mean=0.000018 rms=0.000862 Jy/beam
! Combined flux in latest and established models = 0.129126 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 59 components and 0.129126 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.107227Jy  sigma=0.447463
! Fit after  self-cal, rms=0.107240Jy  sigma=0.447446
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.869 mas, bmaj=12.48 mas, bpa=9.549 degrees
! Estimated noise=1.56019 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.869 x 12.48 at 9.549 degrees (North through East)
! Clean map  min=-0.0029705  max=0.097421 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.363 mas, bmaj=12.33 mas, bpa=11.36 degrees
! Estimated noise=2.0537 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0861269 Jy
! Component: 100  -  total flux cleaned = 0.106034 Jy
! Component: 150  -  total flux cleaned = 0.11461 Jy
! Component: 200  -  total flux cleaned = 0.119739 Jy
! Total flux subtracted in 200 components = 0.119739 Jy
! Clean residual min=-0.004305 max=0.003928 Jy/beam
! Clean residual mean=0.000014 rms=0.001067 Jy/beam
! Combined flux in latest and established models = 0.119739 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.119739 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.869 mas, bmaj=12.48 mas, bpa=9.549 degrees
! Estimated noise=1.56019 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00364862 Jy
! Component: 100  -  total flux cleaned = 0.00577981 Jy
! Component: 150  -  total flux cleaned = 0.00625565 Jy
! Component: 200  -  total flux cleaned = 0.00660264 Jy
! Total flux subtracted in 200 components = 0.00660264 Jy
! Clean residual min=-0.002997 max=0.002790 Jy/beam
! Clean residual mean=0.000009 rms=0.000771 Jy/beam
! Combined flux in latest and established models = 0.126341 Jy
! Adding 17 model components to the UV plane model.
! The established model now contains 30 components and 0.126341 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.368 mas, bmaj=17.61 mas, bpa=-1.49 degrees
! Estimated noise=1.82643 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000766127 Jy
! Component: 100  -  total flux cleaned = 0.00087411 Jy
! Component: 150  -  total flux cleaned = 0.00100636 Jy
! Component: 200  -  total flux cleaned = 0.00112631 Jy
! Total flux subtracted in 200 components = 0.00112631 Jy
! Clean residual min=-0.002977 max=0.002711 Jy/beam
! Clean residual mean=0.000015 rms=0.000872 Jy/beam
! Combined flux in latest and established models = 0.127467 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000107492 Jy
! Component: 100  -  total flux cleaned = 0.000182214 Jy
! Component: 150  -  total flux cleaned = 0.000252793 Jy
! Component: 200  -  total flux cleaned = 0.000318938 Jy
! Total flux subtracted in 200 components = 0.000318938 Jy
! Clean residual min=-0.003000 max=0.002698 Jy/beam
! Clean residual mean=0.000016 rms=0.000862 Jy/beam
! Combined flux in latest and established models = 0.127786 Jy
! Adding 14 model components to the UV plane model.
! The established model now contains 38 components and 0.127786 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.869 mas, bmaj=12.48 mas, bpa=9.549 degrees
! Estimated noise=1.56019 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.27348e-05 Jy
! Component: 100  -  total flux cleaned = 0.000114389 Jy
! Component: 150  -  total flux cleaned = 0.000237168 Jy
! Component: 200  -  total flux cleaned = 0.000321205 Jy
! Total flux subtracted in 200 components = 0.000321205 Jy
! Clean residual min=-0.002926 max=0.002730 Jy/beam
! Clean residual mean=0.000010 rms=0.000739 Jy/beam
! Combined flux in latest and established models = 0.128108 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 56 components and 0.128108 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.107274Jy  sigma=0.447285
! Fit after  self-cal, rms=0.107261Jy  sigma=0.447234
wmodel J0019-2205_S_b_map.mod
! Writing 56 model components to file: J0019-2205_S_b_map.mod
wobs   J0019-2205_S_b_uvs.fits
! Writing UV FITS file: J0019-2205_S_b_uvs.fits
wwins  J0019-2205_S_b_map.win
! wwins: Wrote 1 windows to J0019-2205_S_b_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000430257 Jy
! Component: 100  -  total flux cleaned = -0.000152267 Jy
! Component: 150  -  total flux cleaned = -6.45878e-05 Jy
! Component: 200  -  total flux cleaned = 0.000101458 Jy
! Component: 250  -  total flux cleaned = 0.000303927 Jy
! Component: 300  -  total flux cleaned = 0.000538196 Jy
! Component: 350  -  total flux cleaned = 0.00061297 Jy
! Component: 400  -  total flux cleaned = 0.000649262 Jy
! Component: 450  -  total flux cleaned = 0.000684477 Jy
! Component: 500  -  total flux cleaned = 0.000787031 Jy
! Component: 550  -  total flux cleaned = 0.000853421 Jy
! Component: 600  -  total flux cleaned = 0.000983368 Jy
! Component: 650  -  total flux cleaned = 0.00114145 Jy
! Component: 700  -  total flux cleaned = 0.00117138 Jy
! Component: 750  -  total flux cleaned = 0.00129212 Jy
! Component: 800  -  total flux cleaned = 0.00135068 Jy
! Component: 850  -  total flux cleaned = 0.00135024 Jy
! Component: 900  -  total flux cleaned = 0.00135014 Jy
! Component: 950  -  total flux cleaned = 0.00135044 Jy
! Component: 1000  -  total flux cleaned = 0.00135061 Jy
! Component: 1050  -  total flux cleaned = 0.00135016 Jy
! Component: 1100  -  total flux cleaned = 0.00135036 Jy
! Component: 1150  -  total flux cleaned = 0.00135022 Jy
! Component: 1200  -  total flux cleaned = 0.00132507 Jy
! Component: 1250  -  total flux cleaned = 0.0013502 Jy
! Component: 1300  -  total flux cleaned = 0.00142328 Jy
! Component: 1350  -  total flux cleaned = 0.00149465 Jy
! Component: 1400  -  total flux cleaned = 0.00142333 Jy
! Component: 1450  -  total flux cleaned = 0.0014698 Jy
! Component: 1500  -  total flux cleaned = 0.00146983 Jy
! Component: 1550  -  total flux cleaned = 0.00146963 Jy
! Component: 1600  -  total flux cleaned = 0.00149166 Jy
! Component: 1650  -  total flux cleaned = 0.00146969 Jy
! Component: 1700  -  total flux cleaned = 0.00151302 Jy
! Component: 1750  -  total flux cleaned = 0.00146978 Jy
! Component: 1800  -  total flux cleaned = 0.00142733 Jy
! Component: 1850  -  total flux cleaned = 0.00146939 Jy
! Component: 1900  -  total flux cleaned = 0.00142772 Jy
! Component: 1950  -  total flux cleaned = 0.00144851 Jy
! Component: 2000  -  total flux cleaned = 0.00144835 Jy
! Component: 2050  -  total flux cleaned = 0.00140794 Jy
! Component: 2100  -  total flux cleaned = 0.00144812 Jy
! Component: 2150  -  total flux cleaned = 0.00142857 Jy
! Component: 2200  -  total flux cleaned = 0.00144822 Jy
! Component: 2250  -  total flux cleaned = 0.00140932 Jy
! Component: 2300  -  total flux cleaned = 0.00146711 Jy
! Component: 2350  -  total flux cleaned = 0.00140963 Jy
! Component: 2400  -  total flux cleaned = 0.00137174 Jy
! Component: 2450  -  total flux cleaned = 0.00139035 Jy
! Component: 2500  -  total flux cleaned = 0.00133406 Jy
! Component: 2550  -  total flux cleaned = 0.00131563 Jy
! Component: 2600  -  total flux cleaned = 0.0012786 Jy
! Component: 2650  -  total flux cleaned = 0.00122362 Jy
! Component: 2700  -  total flux cleaned = 0.00116901 Jy
! Component: 2750  -  total flux cleaned = 0.00109676 Jy
! Component: 2800  -  total flux cleaned = 0.00104277 Jy
! Component: 2850  -  total flux cleaned = 0.00102486 Jy
! Component: 2900  -  total flux cleaned = 0.000936029 Jy
! Component: 2950  -  total flux cleaned = 0.000936031 Jy
! Component: 3000  -  total flux cleaned = 0.000848272 Jy
! Component: 3050  -  total flux cleaned = 0.000813376 Jy
! Component: 3100  -  total flux cleaned = 0.000796013 Jy
! Component: 3150  -  total flux cleaned = 0.000744194 Jy
! Component: 3200  -  total flux cleaned = 0.000709788 Jy
! Component: 3250  -  total flux cleaned = 0.000658461 Jy
! Component: 3300  -  total flux cleaned = 0.00062436 Jy
! Component: 3350  -  total flux cleaned = 0.000590424 Jy
! Component: 3400  -  total flux cleaned = 0.000539732 Jy
! Component: 3450  -  total flux cleaned = 0.000506089 Jy
! Component: 3500  -  total flux cleaned = 0.000439035 Jy
! Component: 3550  -  total flux cleaned = 0.000455717 Jy
! Component: 3600  -  total flux cleaned = 0.000372591 Jy
! Component: 3650  -  total flux cleaned = 0.000322941 Jy
! Component: 3700  -  total flux cleaned = 0.00033957 Jy
! Component: 3750  -  total flux cleaned = 0.000306581 Jy
! Component: 3800  -  total flux cleaned = 0.000273779 Jy
! Component: 3850  -  total flux cleaned = 0.000224801 Jy
! Component: 3900  -  total flux cleaned = 0.000241187 Jy
! Component: 3950  -  total flux cleaned = 0.000192507 Jy
! Component: 4000  -  total flux cleaned = 0.0001601 Jy
! Component: 4050  -  total flux cleaned = 0.00016007 Jy
! Total flux subtracted in 4096 components = 0.000111696 Jy
! Clean residual min=-0.000895 max=0.000927 Jy/beam
! Clean residual mean=0.000002 rms=0.000290 Jy/beam
! Combined flux in latest and established models = 0.128219 Jy
keep
! Adding 277 model components to the UV plane model.
! The established model now contains 333 components and 0.128219 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J0019-2205_S_b_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.869 x 12.48 at 9.549 degrees (North through East)
! Clean map  min=-0.0025809  max=0.099184 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J0019-2205_S_b_map.fits
wmodel /image_prod/ug002_uva//J0019-2205_S_b_map.mod
! Writing 333 model components to file: /image_prod/ug002_uva//J0019-2205_S_b_map.mod
wobs   /image_prod/ug002_uva//J0019-2205_S_b_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J0019-2205_S_b_uvs.fits
wwins  /image_prod/ug002_uva//J0019-2205_S_b_map.win
! wwins: Wrote 2 windows to /image_prod/ug002_uva//J0019-2205_S_b_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0991841 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.0002751 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.83209 0.83209 1.66418 3.32836 6.65672 13.3134 26.6269 53.2537
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.099 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  360.538 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J0019-2205_S_b_dfm.log closed on Wed Mar  4 18:24:44 2020