! Started logfile: /image_prod/ug002_uva//J0013-1513_S_dfm.log on Wed Mar  4 18:20:06 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J0013-1513_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J0013-1513_S_uva.fits
! AN table 1: 40 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.878472 visibilities/baseline/integration-bin.
! Found source: J0013-1513
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 3795 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0013-1513_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.020290Jy  sigma=7.377656
! Fit after  self-cal, rms=0.848688Jy  sigma=6.146910
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.871 mas, bmaj=13.68 mas, bpa=-18.02 degrees
! Estimated noise=2.44942 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.116301 Jy
! Component: 100  -  total flux cleaned = 0.14442 Jy
! Total flux subtracted in 100 components = 0.14442 Jy
! Clean residual min=-0.007612 max=0.011484 Jy/beam
! Clean residual mean=-0.000033 rms=0.002230 Jy/beam
! Combined flux in latest and established models = 0.14442 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.14442 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.082637Jy  sigma=0.509620
! Fit after  self-cal, rms=0.082615Jy  sigma=0.509533
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.471 mas, bmaj=14.43 mas, bpa=-16.93 degrees
! Estimated noise=1.65038 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0132201 Jy
! Component: 100  -  total flux cleaned = 0.0175671 Jy
! Component: 150  -  total flux cleaned = 0.0180438 Jy
! Component: 200  -  total flux cleaned = 0.0185825 Jy
! Total flux subtracted in 200 components = 0.0185825 Jy
! Clean residual min=-0.006497 max=0.007015 Jy/beam
! Clean residual mean=-0.000011 rms=0.001788 Jy/beam
! Combined flux in latest and established models = 0.163003 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 33 components and 0.163003 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.080495Jy  sigma=0.492641
! Fit after  self-cal, rms=0.080489Jy  sigma=0.492567
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.471 x 14.43 at -16.93 degrees (North through East)
! Clean map  min=-0.0062517  max=0.15286 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.88     FD        0.91     HN        1.02     KP        1.00     
!   LA        1.00     MK        1.04     NL        1.11     OV        1.00     
!   PT        1.04     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.89     HN        1.02     KP        0.99     
!   LA        1.04     MK        0.98     NL        1.16     OV        0.86     
!   PT        1.05     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.89     HN        1.01     KP        1.00     
!   LA        1.04     MK        1.07     NL        1.09     OV        0.98     
!   PT        1.03     
! 
! 
! Fit before self-cal, rms=0.080489Jy  sigma=0.492567
! Fit after  self-cal, rms=0.078544Jy  sigma=0.479850
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.524 mas, bmaj=14.21 mas, bpa=-16.74 degrees
! Estimated noise=1.63942 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000958982 Jy
! Component: 100  -  total flux cleaned = -0.000861671 Jy
! Component: 150  -  total flux cleaned = -0.000700871 Jy
! Component: 200  -  total flux cleaned = -0.000765178 Jy
! Total flux subtracted in 200 components = -0.000765178 Jy
! Clean residual min=-0.005537 max=0.005113 Jy/beam
! Clean residual mean=-0.000006 rms=0.001311 Jy/beam
! Combined flux in latest and established models = 0.162238 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 63 components and 0.162238 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.078273Jy  sigma=0.478453
! Fit after  self-cal, rms=0.078363Jy  sigma=0.478283
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.078363Jy  sigma=0.478283
! Fit after  self-cal, rms=0.076032Jy  sigma=0.468960
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.527 mas, bmaj=14.34 mas, bpa=-16.67 degrees
! Estimated noise=1.63656 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0010442 Jy
! Component: 100  -  total flux cleaned = 0.000998832 Jy
! Component: 150  -  total flux cleaned = 0.000923872 Jy
! Component: 200  -  total flux cleaned = 0.000892015 Jy
! Total flux subtracted in 200 components = 0.000892015 Jy
! Clean residual min=-0.003287 max=0.002945 Jy/beam
! Clean residual mean=0.000001 rms=0.000773 Jy/beam
! Combined flux in latest and established models = 0.16313 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 81 components and 0.16313 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.075978Jy  sigma=0.468621
! Fit after  self-cal, rms=0.076006Jy  sigma=0.468508
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000104576 Jy
! Component: 100  -  total flux cleaned = -0.000107239 Jy
! Component: 150  -  total flux cleaned = -0.000107343 Jy
! Component: 200  -  total flux cleaned = -0.000107391 Jy
! Total flux subtracted in 200 components = -0.000107391 Jy
! Clean residual min=-0.003285 max=0.002844 Jy/beam
! Clean residual mean=0.000001 rms=0.000766 Jy/beam
! Combined flux in latest and established models = 0.163022 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 92 components and 0.163022 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.075982Jy  sigma=0.468383
! Fit after  self-cal, rms=0.075980Jy  sigma=0.468374
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.075980Jy  sigma=0.468374
! Fit after  self-cal, rms=0.076071Jy  sigma=0.468291
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.529 mas, bmaj=14.36 mas, bpa=-16.59 degrees
! Estimated noise=1.63633 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000419257 Jy
! Component: 100  -  total flux cleaned = 0.00044863 Jy
! Component: 150  -  total flux cleaned = 0.00047428 Jy
! Component: 200  -  total flux cleaned = 0.000474305 Jy
! Total flux subtracted in 200 components = 0.000474305 Jy
! Clean residual min=-0.003332 max=0.002809 Jy/beam
! Clean residual mean=0.000001 rms=0.000750 Jy/beam
! Combined flux in latest and established models = 0.163497 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 98 components and 0.163497 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.076044Jy  sigma=0.468135
! Fit after  self-cal, rms=0.076047Jy  sigma=0.468127
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.12575e-05 Jy
! Component: 100  -  total flux cleaned = 1.10629e-05 Jy
! Component: 150  -  total flux cleaned = 3.20753e-05 Jy
! Component: 200  -  total flux cleaned = 7.14948e-05 Jy
! Total flux subtracted in 200 components = 7.14948e-05 Jy
! Clean residual min=-0.003320 max=0.002769 Jy/beam
! Clean residual mean=0.000001 rms=0.000746 Jy/beam
! Combined flux in latest and established models = 0.163568 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 103 components and 0.163568 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.076033Jy  sigma=0.468058
! Fit after  self-cal, rms=0.076033Jy  sigma=0.468054
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.076033Jy  sigma=0.468054
! Fit after  self-cal, rms=0.076108Jy  sigma=0.468009
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.837 mas, bmaj=17.83 mas, bpa=-5.317 degrees
! Estimated noise=1.91832 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000103278 Jy
! Component: 100  -  total flux cleaned = 0.000122745 Jy
! Component: 150  -  total flux cleaned = 0.000155352 Jy
! Component: 200  -  total flux cleaned = 0.000169994 Jy
! Total flux subtracted in 200 components = 0.000169994 Jy
! Clean residual min=-0.003430 max=0.003546 Jy/beam
! Clean residual mean=0.000002 rms=0.000933 Jy/beam
! Combined flux in latest and established models = 0.163738 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 114 components and 0.163738 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.076102Jy  sigma=0.467984
! Fit after  self-cal, rms=0.076106Jy  sigma=0.467976
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.44156e-07 Jy
! Component: 100  -  total flux cleaned = 1.34454e-05 Jy
! Component: 150  -  total flux cleaned = 1.27897e-05 Jy
! Component: 200  -  total flux cleaned = 2.47389e-05 Jy
! Total flux subtracted in 200 components = 2.47389e-05 Jy
! Clean residual min=-0.003395 max=0.003560 Jy/beam
! Clean residual mean=0.000002 rms=0.000930 Jy/beam
! Combined flux in latest and established models = 0.163763 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 120 components and 0.163763 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.076103Jy  sigma=0.467982
! Fit after  self-cal, rms=0.076104Jy  sigma=0.467978
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.53 mas, bmaj=14.38 mas, bpa=-16.53 degrees
! Estimated noise=1.63568 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.53 x 14.38 at -16.53 degrees (North through East)
! Clean map  min=-0.0032255  max=0.15194 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.928 mas, bmaj=13.62 mas, bpa=-17.66 degrees
! Estimated noise=2.46062 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.116717 Jy
! Component: 100  -  total flux cleaned = 0.143376 Jy
! Component: 150  -  total flux cleaned = 0.153299 Jy
! Component: 200  -  total flux cleaned = 0.158304 Jy
! Total flux subtracted in 200 components = 0.158304 Jy
! Clean residual min=-0.004282 max=0.004095 Jy/beam
! Clean residual mean=-0.000009 rms=0.001160 Jy/beam
! Combined flux in latest and established models = 0.158304 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 34 model components to the UV plane model.
! The established model now contains 34 components and 0.158304 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.53 mas, bmaj=14.38 mas, bpa=-16.53 degrees
! Estimated noise=1.63568 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00361021 Jy
! Component: 100  -  total flux cleaned = 0.00512824 Jy
! Component: 150  -  total flux cleaned = 0.00518407 Jy
! Component: 200  -  total flux cleaned = 0.00523108 Jy
! Total flux subtracted in 200 components = 0.00523108 Jy
! Clean residual min=-0.003333 max=0.002844 Jy/beam
! Clean residual mean=0.000000 rms=0.000754 Jy/beam
! Combined flux in latest and established models = 0.163535 Jy
! Adding 24 model components to the UV plane model.
! The established model now contains 58 components and 0.163535 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.837 mas, bmaj=17.83 mas, bpa=-5.317 degrees
! Estimated noise=1.91832 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000792456 Jy
! Component: 100  -  total flux cleaned = 0.000741886 Jy
! Component: 150  -  total flux cleaned = 0.000658775 Jy
! Component: 200  -  total flux cleaned = 0.000603138 Jy
! Total flux subtracted in 200 components = 0.000603138 Jy
! Clean residual min=-0.003344 max=0.003575 Jy/beam
! Clean residual mean=0.000002 rms=0.000933 Jy/beam
! Combined flux in latest and established models = 0.164138 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.66589e-05 Jy
! Component: 100  -  total flux cleaned = -0.000141448 Jy
! Component: 150  -  total flux cleaned = -0.0001964 Jy
! Component: 200  -  total flux cleaned = -0.000234819 Jy
! Total flux subtracted in 200 components = -0.000234819 Jy
! Clean residual min=-0.003319 max=0.003564 Jy/beam
! Clean residual mean=0.000002 rms=0.000931 Jy/beam
! Combined flux in latest and established models = 0.163903 Jy
! Adding 22 model components to the UV plane model.
! The established model now contains 78 components and 0.163903 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.53 mas, bmaj=14.38 mas, bpa=-16.53 degrees
! Estimated noise=1.63568 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000187482 Jy
! Component: 100  -  total flux cleaned = -9.45385e-05 Jy
! Component: 150  -  total flux cleaned = -6.85822e-05 Jy
! Component: 200  -  total flux cleaned = -4.4556e-05 Jy
! Total flux subtracted in 200 components = -4.4556e-05 Jy
! Clean residual min=-0.003348 max=0.002747 Jy/beam
! Clean residual mean=0.000001 rms=0.000741 Jy/beam
! Combined flux in latest and established models = 0.163859 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 90 components and 0.163859 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.076109Jy  sigma=0.468013
! Fit after  self-cal, rms=0.076098Jy  sigma=0.467990
wmodel J0013-1513_S_map.mod
! Writing 90 model components to file: J0013-1513_S_map.mod
wobs   J0013-1513_S_uvs.fits
! Writing UV FITS file: J0013-1513_S_uvs.fits
wwins  J0013-1513_S_map.win
! wwins: Wrote 1 windows to J0013-1513_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000982127 Jy
! Component: 100  -  total flux cleaned = -0.00127251 Jy
! Component: 150  -  total flux cleaned = -0.00131708 Jy
! Component: 200  -  total flux cleaned = -0.00131691 Jy
! Component: 250  -  total flux cleaned = -0.00127593 Jy
! Component: 300  -  total flux cleaned = -0.00123649 Jy
! Component: 350  -  total flux cleaned = -0.00123728 Jy
! Component: 400  -  total flux cleaned = -0.00116568 Jy
! Component: 450  -  total flux cleaned = -0.00109611 Jy
! Component: 500  -  total flux cleaned = -0.00106219 Jy
! Component: 550  -  total flux cleaned = -0.000996481 Jy
! Component: 600  -  total flux cleaned = -0.000901043 Jy
! Component: 650  -  total flux cleaned = -0.000808556 Jy
! Component: 700  -  total flux cleaned = -0.000689008 Jy
! Component: 750  -  total flux cleaned = -0.000659721 Jy
! Component: 800  -  total flux cleaned = -0.000602421 Jy
! Component: 850  -  total flux cleaned = -0.000601982 Jy
! Component: 900  -  total flux cleaned = -0.000575153 Jy
! Component: 950  -  total flux cleaned = -0.000549033 Jy
! Component: 1000  -  total flux cleaned = -0.000602147 Jy
! Component: 1050  -  total flux cleaned = -0.000602314 Jy
! Component: 1100  -  total flux cleaned = -0.000677852 Jy
! Component: 1150  -  total flux cleaned = -0.000702189 Jy
! Component: 1200  -  total flux cleaned = -0.000750541 Jy
! Component: 1250  -  total flux cleaned = -0.000822 Jy
! Component: 1300  -  total flux cleaned = -0.000869039 Jy
! Component: 1350  -  total flux cleaned = -0.000937895 Jy
! Component: 1400  -  total flux cleaned = -0.00107411 Jy
! Component: 1450  -  total flux cleaned = -0.00114105 Jy
! Component: 1500  -  total flux cleaned = -0.0011632 Jy
! Component: 1550  -  total flux cleaned = -0.00129392 Jy
! Component: 1600  -  total flux cleaned = -0.00137953 Jy
! Component: 1650  -  total flux cleaned = -0.00154795 Jy
! Component: 1700  -  total flux cleaned = -0.00167254 Jy
! Component: 1750  -  total flux cleaned = -0.00181612 Jy
! Component: 1800  -  total flux cleaned = -0.00191698 Jy
! Component: 1850  -  total flux cleaned = -0.00213656 Jy
! Component: 1900  -  total flux cleaned = -0.00213666 Jy
! Component: 1950  -  total flux cleaned = -0.00223461 Jy
! Component: 2000  -  total flux cleaned = -0.00235026 Jy
! Component: 2050  -  total flux cleaned = -0.00236933 Jy
! Component: 2100  -  total flux cleaned = -0.00246361 Jy
! Component: 2150  -  total flux cleaned = -0.00257514 Jy
! Component: 2200  -  total flux cleaned = -0.00266691 Jy
! Component: 2250  -  total flux cleaned = -0.00272113 Jy
! Component: 2300  -  total flux cleaned = -0.00284601 Jy
! Component: 2350  -  total flux cleaned = -0.00289899 Jy
! Component: 2400  -  total flux cleaned = -0.00288153 Jy
! Component: 2450  -  total flux cleaned = -0.00295117 Jy
! Component: 2500  -  total flux cleaned = -0.0030195 Jy
! Component: 2550  -  total flux cleaned = -0.00301961 Jy
! Component: 2600  -  total flux cleaned = -0.00305317 Jy
! Component: 2650  -  total flux cleaned = -0.00318504 Jy
! Component: 2700  -  total flux cleaned = -0.00321754 Jy
! Component: 2750  -  total flux cleaned = -0.00326579 Jy
! Component: 2800  -  total flux cleaned = -0.00329774 Jy
! Component: 2850  -  total flux cleaned = -0.0033455 Jy
! Component: 2900  -  total flux cleaned = -0.00343927 Jy
! Component: 2950  -  total flux cleaned = -0.00343945 Jy
! Component: 3000  -  total flux cleaned = -0.00350108 Jy
! Component: 3050  -  total flux cleaned = -0.00360749 Jy
! Component: 3100  -  total flux cleaned = -0.00363765 Jy
! Component: 3150  -  total flux cleaned = -0.00368234 Jy
! Component: 3200  -  total flux cleaned = -0.00366747 Jy
! Component: 3250  -  total flux cleaned = -0.00368223 Jy
! Component: 3300  -  total flux cleaned = -0.00369681 Jy
! Component: 3350  -  total flux cleaned = -0.00371116 Jy
! Component: 3400  -  total flux cleaned = -0.00369666 Jy
! Component: 3450  -  total flux cleaned = -0.00363982 Jy
! Component: 3500  -  total flux cleaned = -0.00366817 Jy
! Component: 3550  -  total flux cleaned = -0.0036542 Jy
! Component: 3600  -  total flux cleaned = -0.00364028 Jy
! Component: 3650  -  total flux cleaned = -0.00361271 Jy
! Component: 3700  -  total flux cleaned = -0.00359892 Jy
! Component: 3750  -  total flux cleaned = -0.00358538 Jy
! Component: 3800  -  total flux cleaned = -0.00353122 Jy
! Component: 3850  -  total flux cleaned = -0.00353114 Jy
! Component: 3900  -  total flux cleaned = -0.00346422 Jy
! Component: 3950  -  total flux cleaned = -0.00346415 Jy
! Component: 4000  -  total flux cleaned = -0.00338494 Jy
! Component: 4050  -  total flux cleaned = -0.00342422 Jy
! Total flux subtracted in 4096 components = -0.00338515 Jy
! Clean residual min=-0.000812 max=0.000796 Jy/beam
! Clean residual mean=0.000001 rms=0.000249 Jy/beam
! Combined flux in latest and established models = 0.160473 Jy
keep
! Adding 284 model components to the UV plane model.
! The established model now contains 374 components and 0.160473 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J0013-1513_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.53 x 14.38 at -16.53 degrees (North through East)
! Clean map  min=-0.0021454  max=0.15159 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J0013-1513_S_map.fits
wmodel /image_prod/ug002_uva//J0013-1513_S_map.mod
! Writing 374 model components to file: /image_prod/ug002_uva//J0013-1513_S_map.mod
wobs   /image_prod/ug002_uva//J0013-1513_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J0013-1513_S_uvs.fits
wwins  /image_prod/ug002_uva//J0013-1513_S_map.win
! wwins: Wrote 2 windows to /image_prod/ug002_uva//J0013-1513_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.151593 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000242471 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.479845 0.479845 0.95969 1.91938 3.83876 7.67752 15.355 30.7101 61.4201
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.151 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  625.202 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J0013-1513_S_dfm.log closed on Wed Mar  4 18:20:10 2020