! Started logfile: /image_prod/ug002_uva//J0013+4051_S_d_dfm.log on Wed Mar 4 18:18:45 2020 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /image_prod/ug002_uva//J0013+4051_S_d_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0013+4051_S_d_uva.fits ! AN table 1: 18 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.814815 visibilities/baseline/integration-bin. ! Found source: J0013+4051 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 44 lines of history. ! ! Reading 1584 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0013+4051_S_d] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.103137Jy sigma=8.014030 ! Fit after self-cal, rms=0.621292Jy sigma=4.594109 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.052 mas, bmaj=4.711 mas, bpa=-9.568 degrees ! Estimated noise=3.02699 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.29857 Jy ! Component: 100 - total flux cleaned = 0.363744 Jy ! Total flux subtracted in 100 components = 0.363744 Jy ! Clean residual min=-0.015485 max=0.021603 Jy/beam ! Clean residual mean=-0.000020 rms=0.004255 Jy/beam ! Combined flux in latest and established models = 0.363744 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.363744 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.139744Jy sigma=0.709432 ! Fit after self-cal, rms=0.139729Jy sigma=0.709412 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.464 mas, bmaj=5.352 mas, bpa=-10.2 degrees ! Estimated noise=2.50877 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.020023 Jy ! Component: 100 - total flux cleaned = 0.0252985 Jy ! Component: 150 - total flux cleaned = 0.0263282 Jy ! Component: 200 - total flux cleaned = 0.0267254 Jy ! Total flux subtracted in 200 components = 0.0267254 Jy ! Clean residual min=-0.015890 max=0.020555 Jy/beam ! Clean residual mean=-0.000022 rms=0.004324 Jy/beam ! Combined flux in latest and established models = 0.390469 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.390469 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.135701Jy sigma=0.683064 ! Fit after self-cal, rms=0.135647Jy sigma=0.682841 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.464 x 5.352 at -10.2 degrees (North through East) ! Clean map min=-0.015348 max=0.38472 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.03 HN 0.97 KP 1.03 ! LA 1.01 MK 1.03 NL 1.00 OV 0.92 ! SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.03 HN 1.02 KP 1.03 ! LA 1.00 MK 1.06 NL 0.86 OV 1.09 ! SC 0.83 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.04 HN 0.97 KP 1.01 ! LA 1.01 MK 1.02 NL 0.89 OV 1.01 ! SC 0.99 ! ! ! Fit before self-cal, rms=0.135647Jy sigma=0.682841 ! Fit after self-cal, rms=0.116423Jy sigma=0.641528 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.465 mas, bmaj=5.319 mas, bpa=-9.298 degrees ! Estimated noise=2.49572 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000746955 Jy ! Component: 100 - total flux cleaned = 0.000888591 Jy ! Component: 150 - total flux cleaned = 0.00115019 Jy ! Component: 200 - total flux cleaned = 0.00162659 Jy ! Total flux subtracted in 200 components = 0.00162659 Jy ! Clean residual min=-0.016550 max=0.017208 Jy/beam ! Clean residual mean=-0.000027 rms=0.003935 Jy/beam ! Combined flux in latest and established models = 0.392096 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 31 components and 0.392096 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.115935Jy sigma=0.638487 ! Fit after self-cal, rms=0.115937Jy sigma=0.638308 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.115937Jy sigma=0.638308 ! Fit after self-cal, rms=0.103076Jy sigma=0.448852 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.444 mas, bmaj=5.35 mas, bpa=-9.792 degrees ! Estimated noise=2.50155 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00164482 Jy ! Component: 100 - total flux cleaned = 0.00164886 Jy ! Component: 150 - total flux cleaned = 0.00171592 Jy ! Component: 200 - total flux cleaned = 0.00165717 Jy ! Total flux subtracted in 200 components = 0.00165717 Jy ! Clean residual min=-0.004858 max=0.005203 Jy/beam ! Clean residual mean=0.000007 rms=0.001175 Jy/beam ! Combined flux in latest and established models = 0.393753 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 35 components and 0.393753 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.102937Jy sigma=0.447613 ! Fit after self-cal, rms=0.103133Jy sigma=0.447138 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-76.5, -53.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00132915 Jy ! Component: 100 - total flux cleaned = 0.00105069 Jy ! Component: 150 - total flux cleaned = 0.0011439 Jy ! Component: 200 - total flux cleaned = 0.00138708 Jy ! Total flux subtracted in 200 components = 0.00138708 Jy ! Clean residual min=-0.004276 max=0.004488 Jy/beam ! Clean residual mean=0.000008 rms=0.001088 Jy/beam ! Combined flux in latest and established models = 0.39514 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 51 components and 0.39514 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.102735Jy sigma=0.443847 ! Fit after self-cal, rms=0.102709Jy sigma=0.443610 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.102709Jy sigma=0.443610 ! Fit after self-cal, rms=0.103237Jy sigma=0.443125 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.436 mas, bmaj=5.349 mas, bpa=-9.676 degrees ! Estimated noise=2.50489 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00106766 Jy ! Component: 100 - total flux cleaned = 0.00138115 Jy ! Component: 150 - total flux cleaned = 0.00159269 Jy ! Component: 200 - total flux cleaned = 0.00177763 Jy ! Total flux subtracted in 200 components = 0.00177763 Jy ! Clean residual min=-0.004033 max=0.004292 Jy/beam ! Clean residual mean=0.000007 rms=0.001040 Jy/beam ! Combined flux in latest and established models = 0.396918 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 60 components and 0.396918 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.103090Jy sigma=0.442003 ! Fit after self-cal, rms=0.103082Jy sigma=0.441953 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000202802 Jy ! Component: 100 - total flux cleaned = 0.000146549 Jy ! Component: 150 - total flux cleaned = -7.5355e-06 Jy ! Component: 200 - total flux cleaned = -4.24878e-06 Jy ! Total flux subtracted in 200 components = -4.24878e-06 Jy ! Clean residual min=-0.004118 max=0.004202 Jy/beam ! Clean residual mean=0.000007 rms=0.001025 Jy/beam ! Combined flux in latest and established models = 0.396914 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 64 components and 0.396914 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.103023Jy sigma=0.441413 ! Fit after self-cal, rms=0.103028Jy sigma=0.441399 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.103028Jy sigma=0.441399 ! Fit after self-cal, rms=0.103180Jy sigma=0.441230 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.614 mas, bmaj=8.781 mas, bpa=-8.614 degrees ! Estimated noise=3.12833 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00165134 Jy ! Component: 100 - total flux cleaned = 0.00190786 Jy ! Component: 150 - total flux cleaned = 0.00216672 Jy ! Component: 200 - total flux cleaned = 0.00227495 Jy ! Total flux subtracted in 200 components = 0.00227495 Jy ! Clean residual min=-0.005136 max=0.004509 Jy/beam ! Clean residual mean=0.000017 rms=0.001259 Jy/beam ! Combined flux in latest and established models = 0.399189 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 77 components and 0.399189 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.103110Jy sigma=0.441109 ! Fit after self-cal, rms=0.103101Jy sigma=0.441049 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000257856 Jy ! Component: 100 - total flux cleaned = 0.000225725 Jy ! Component: 150 - total flux cleaned = 0.000137292 Jy ! Component: 200 - total flux cleaned = 0.000110266 Jy ! Total flux subtracted in 200 components = 0.000110266 Jy ! Clean residual min=-0.005128 max=0.004404 Jy/beam ! Clean residual mean=0.000017 rms=0.001252 Jy/beam ! Combined flux in latest and established models = 0.399299 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 83 components and 0.399299 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.103079Jy sigma=0.441059 ! Fit after self-cal, rms=0.103075Jy sigma=0.441045 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.433 mas, bmaj=5.348 mas, bpa=-9.613 degrees ! Estimated noise=2.50728 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.433 x 5.348 at -9.613 degrees (North through East) ! Clean map min=-0.0043342 max=0.38304 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.021 mas, bmaj=4.713 mas, bpa=-9.653 degrees ! Estimated noise=3.04016 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.299825 Jy ! Component: 100 - total flux cleaned = 0.365436 Jy ! Component: 150 - total flux cleaned = 0.384393 Jy ! Component: 200 - total flux cleaned = 0.393089 Jy ! Total flux subtracted in 200 components = 0.393089 Jy ! Clean residual min=-0.005585 max=0.006332 Jy/beam ! Clean residual mean=0.000009 rms=0.001329 Jy/beam ! Combined flux in latest and established models = 0.39309 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.39309 Jy ! Inverting map and beam ! Estimated beam: bmin=3.433 mas, bmaj=5.348 mas, bpa=-9.613 degrees ! Estimated noise=2.50728 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3, 6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00387379 Jy ! Component: 100 - total flux cleaned = 0.00541694 Jy ! Component: 150 - total flux cleaned = 0.00652968 Jy ! Component: 200 - total flux cleaned = 0.00713618 Jy ! Total flux subtracted in 200 components = 0.00713618 Jy ! Clean residual min=-0.004183 max=0.004701 Jy/beam ! Clean residual mean=0.000007 rms=0.001044 Jy/beam ! Combined flux in latest and established models = 0.400226 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 33 components and 0.400226 Jy ! Inverting map ! Added new window around map position (-31, 72). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00315068 Jy ! Component: 100 - total flux cleaned = 0.00436834 Jy ! Component: 150 - total flux cleaned = 0.00510432 Jy ! Component: 200 - total flux cleaned = 0.00552429 Jy ! Total flux subtracted in 200 components = 0.00552429 Jy ! Clean residual min=-0.004064 max=0.003897 Jy/beam ! Clean residual mean=0.000005 rms=0.000964 Jy/beam ! Combined flux in latest and established models = 0.40575 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 52 components and 0.40575 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.614 mas, bmaj=8.781 mas, bpa=-8.614 degrees ! Estimated noise=3.12833 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000189379 Jy ! Component: 100 - total flux cleaned = 0.000560954 Jy ! Component: 150 - total flux cleaned = 0.000806781 Jy ! Component: 200 - total flux cleaned = 0.000963505 Jy ! Total flux subtracted in 200 components = 0.000963505 Jy ! Clean residual min=-0.004390 max=0.003914 Jy/beam ! Clean residual mean=0.000017 rms=0.001132 Jy/beam ! Combined flux in latest and established models = 0.406714 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00023213 Jy ! Component: 100 - total flux cleaned = 0.000315961 Jy ! Component: 150 - total flux cleaned = 0.000474484 Jy ! Component: 200 - total flux cleaned = 0.000619227 Jy ! Total flux subtracted in 200 components = 0.000619227 Jy ! Clean residual min=-0.004406 max=0.003835 Jy/beam ! Clean residual mean=0.000016 rms=0.001119 Jy/beam ! Combined flux in latest and established models = 0.407333 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 89 components and 0.407333 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.433 mas, bmaj=5.348 mas, bpa=-9.613 degrees ! Estimated noise=2.50728 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000197707 Jy ! Component: 100 - total flux cleaned = -0.000133475 Jy ! Component: 150 - total flux cleaned = -8.09712e-06 Jy ! Component: 200 - total flux cleaned = 0.000167815 Jy ! Total flux subtracted in 200 components = 0.000167815 Jy ! Clean residual min=-0.003677 max=0.003748 Jy/beam ! Clean residual mean=0.000007 rms=0.000913 Jy/beam ! Combined flux in latest and established models = 0.407501 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 107 components and 0.407501 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.102804Jy sigma=0.438316 ! Fit after self-cal, rms=0.102795Jy sigma=0.437904 wmodel J0013+4051_S_d_map.mod ! Writing 107 model components to file: J0013+4051_S_d_map.mod wobs J0013+4051_S_d_uvs.fits ! Writing UV FITS file: J0013+4051_S_d_uvs.fits wwins J0013+4051_S_d_map.win ! wwins: Wrote 4 windows to J0013+4051_S_d_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000138082 Jy ! Component: 100 - total flux cleaned = -0.000203431 Jy ! Component: 150 - total flux cleaned = -0.000262694 Jy ! Component: 200 - total flux cleaned = -0.000554023 Jy ! Component: 250 - total flux cleaned = -0.000780717 Jy ! Component: 300 - total flux cleaned = -0.0011104 Jy ! Component: 350 - total flux cleaned = -0.00137717 Jy ! Component: 400 - total flux cleaned = -0.00184506 Jy ! Component: 450 - total flux cleaned = -0.00220077 Jy ! Component: 500 - total flux cleaned = -0.00249785 Jy ! Component: 550 - total flux cleaned = -0.00273988 Jy ! Component: 600 - total flux cleaned = -0.00302467 Jy ! Component: 650 - total flux cleaned = -0.00335027 Jy ! Component: 700 - total flux cleaned = -0.00362348 Jy ! Component: 750 - total flux cleaned = -0.00384933 Jy ! Component: 800 - total flux cleaned = -0.00420309 Jy ! Component: 850 - total flux cleaned = -0.00446432 Jy ! Component: 900 - total flux cleaned = -0.00455017 Jy ! Component: 950 - total flux cleaned = -0.0047618 Jy ! Component: 1000 - total flux cleaned = -0.00509573 Jy ! Component: 1050 - total flux cleaned = -0.00525938 Jy ! Component: 1100 - total flux cleaned = -0.00538131 Jy ! Component: 1150 - total flux cleaned = -0.00558297 Jy ! Component: 1200 - total flux cleaned = -0.00593957 Jy ! Component: 1250 - total flux cleaned = -0.00605724 Jy ! Component: 1300 - total flux cleaned = -0.00640607 Jy ! Component: 1350 - total flux cleaned = -0.00659787 Jy ! Component: 1400 - total flux cleaned = -0.00678813 Jy ! Component: 1450 - total flux cleaned = -0.0071266 Jy ! Component: 1500 - total flux cleaned = -0.00731214 Jy ! Component: 1550 - total flux cleaned = -0.00760639 Jy ! Component: 1600 - total flux cleaned = -0.00778856 Jy ! Component: 1650 - total flux cleaned = -0.00814919 Jy ! Component: 1700 - total flux cleaned = -0.00832708 Jy ! Component: 1750 - total flux cleaned = -0.00853929 Jy ! Component: 1800 - total flux cleaned = -0.00871392 Jy ! Component: 1850 - total flux cleaned = -0.00906045 Jy ! Component: 1900 - total flux cleaned = -0.00926641 Jy ! Component: 1950 - total flux cleaned = -0.00936892 Jy ! Component: 2000 - total flux cleaned = -0.00980748 Jy ! Component: 2050 - total flux cleaned = -0.00990747 Jy ! Component: 2100 - total flux cleaned = -0.0101727 Jy ! Component: 2150 - total flux cleaned = -0.010304 Jy ! Component: 2200 - total flux cleaned = -0.0104667 Jy ! Component: 2250 - total flux cleaned = -0.0106608 Jy ! Component: 2300 - total flux cleaned = -0.0108852 Jy ! Component: 2350 - total flux cleaned = -0.0110126 Jy ! Component: 2400 - total flux cleaned = -0.0110441 Jy ! Component: 2450 - total flux cleaned = -0.0111697 Jy ! Component: 2500 - total flux cleaned = -0.0114486 Jy ! Component: 2550 - total flux cleaned = -0.0115405 Jy ! Component: 2600 - total flux cleaned = -0.0116016 Jy ! Component: 2650 - total flux cleaned = -0.0116625 Jy ! Component: 2700 - total flux cleaned = -0.0117833 Jy ! Component: 2750 - total flux cleaned = -0.0118427 Jy ! Component: 2800 - total flux cleaned = -0.0120204 Jy ! Component: 2850 - total flux cleaned = -0.0119617 Jy ! Component: 2900 - total flux cleaned = -0.0121951 Jy ! Component: 2950 - total flux cleaned = -0.0121657 Jy ! Component: 3000 - total flux cleaned = -0.0122808 Jy ! Component: 3050 - total flux cleaned = -0.0123947 Jy ! Component: 3100 - total flux cleaned = -0.0124513 Jy ! Component: 3150 - total flux cleaned = -0.012564 Jy ! Component: 3200 - total flux cleaned = -0.0125636 Jy ! Component: 3250 - total flux cleaned = -0.0127023 Jy ! Component: 3300 - total flux cleaned = -0.0128122 Jy ! Component: 3350 - total flux cleaned = -0.012867 Jy ! Component: 3400 - total flux cleaned = -0.0129212 Jy ! Component: 3450 - total flux cleaned = -0.0130025 Jy ! Component: 3500 - total flux cleaned = -0.013083 Jy ! Component: 3550 - total flux cleaned = -0.0131895 Jy ! Component: 3600 - total flux cleaned = -0.0131893 Jy ! Component: 3650 - total flux cleaned = -0.0131368 Jy ! Component: 3700 - total flux cleaned = -0.0132678 Jy ! Component: 3750 - total flux cleaned = -0.0133459 Jy ! Component: 3800 - total flux cleaned = -0.0132941 Jy ! Component: 3850 - total flux cleaned = -0.0133968 Jy ! Component: 3900 - total flux cleaned = -0.0134732 Jy ! Component: 3950 - total flux cleaned = -0.0135239 Jy ! Component: 4000 - total flux cleaned = -0.0135489 Jy ! Component: 4050 - total flux cleaned = -0.0135988 Jy ! Total flux subtracted in 4096 components = -0.0135738 Jy ! Clean residual min=-0.001784 max=0.001531 Jy/beam ! Clean residual mean=0.000002 rms=0.000448 Jy/beam ! Combined flux in latest and established models = 0.393927 Jy keep ! Adding 284 model components to the UV plane model. ! The established model now contains 391 components and 0.393927 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0013+4051_S_d_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.433 x 5.348 at -9.613 degrees (North through East) ! Clean map min=-0.0035329 max=0.3834 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0013+4051_S_d_map.fits wmodel /image_prod/ug002_uva//J0013+4051_S_d_map.mod ! Writing 391 model components to file: /image_prod/ug002_uva//J0013+4051_S_d_map.mod wobs /image_prod/ug002_uva//J0013+4051_S_d_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0013+4051_S_d_uvs.fits wwins /image_prod/ug002_uva//J0013+4051_S_d_map.win ! wwins: Wrote 5 windows to /image_prod/ug002_uva//J0013+4051_S_d_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.383397 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000441903 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.34578 0.34578 0.69156 1.38312 2.76624 5.53248 11.065 22.1299 44.2598 88.5197 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.383 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 867.603 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0013+4051_S_d_dfm.log closed on Wed Mar 4 18:18:49 2020