! Started logfile: /image_prod/ug002_uva//J0013+4051_S_a_dfm.log on Wed Mar 4 18:18:31 2020 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /image_prod/ug002_uva//J0013+4051_S_a_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0013+4051_S_a_uva.fits ! AN table 1: 12 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.77963 visibilities/baseline/integration-bin. ! Found source: J0013+4051 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 44 lines of history. ! ! Reading 1263 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0013+4051_S_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.087579Jy sigma=9.732240 ! Fit after self-cal, rms=0.627643Jy sigma=5.632603 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.36 mas, bmaj=6.52 mas, bpa=-20.88 degrees ! Estimated noise=2.71033 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.29451 Jy ! Component: 100 - total flux cleaned = 0.358732 Jy ! Total flux subtracted in 100 components = 0.358732 Jy ! Clean residual min=-0.017265 max=0.019873 Jy/beam ! Clean residual mean=0.000034 rms=0.005158 Jy/beam ! Combined flux in latest and established models = 0.358732 Jy ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 0.358732 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.089766Jy sigma=0.774273 ! Fit after self-cal, rms=0.089760Jy sigma=0.774253 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.766 mas, bmaj=7.121 mas, bpa=-20.78 degrees ! Estimated noise=2.30874 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.014521 Jy ! Component: 100 - total flux cleaned = 0.0168302 Jy ! Component: 150 - total flux cleaned = 0.0170288 Jy ! Component: 200 - total flux cleaned = 0.0173488 Jy ! Total flux subtracted in 200 components = 0.0173488 Jy ! Clean residual min=-0.016461 max=0.017607 Jy/beam ! Clean residual mean=0.000026 rms=0.004323 Jy/beam ! Combined flux in latest and established models = 0.376081 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.376081 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.087105Jy sigma=0.754008 ! Fit after self-cal, rms=0.087099Jy sigma=0.753967 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.766 x 7.121 at -20.78 degrees (North through East) ! Clean map min=-0.016096 max=0.37705 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.00 HN 0.99 KP 0.98 ! LA 0.99 MK 0.97 NL 0.99 OV 1.12 ! PT 0.96 SC 1.06 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 FD 1.00 HN 0.97 KP 0.98 ! LA 0.99 MK 0.99 NL 1.11 OV 1.43 ! PT 0.97 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.00 HN 0.98 KP 0.95 ! LA 1.01 MK 1.00 NL 0.83 OV 1.15 ! PT 0.96 SC 1.06 ! ! ! Fit before self-cal, rms=0.087099Jy sigma=0.753967 ! Fit after self-cal, rms=0.081354Jy sigma=0.624381 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.781 mas, bmaj=7.1 mas, bpa=-21.57 degrees ! Estimated noise=2.29654 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00330081 Jy ! Component: 100 - total flux cleaned = 0.00390464 Jy ! Component: 150 - total flux cleaned = 0.0042297 Jy ! Component: 200 - total flux cleaned = 0.00450253 Jy ! Total flux subtracted in 200 components = 0.00450253 Jy ! Clean residual min=-0.012186 max=0.014354 Jy/beam ! Clean residual mean=0.000007 rms=0.003148 Jy/beam ! Combined flux in latest and established models = 0.380583 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 29 components and 0.380583 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.080581Jy sigma=0.614500 ! Fit after self-cal, rms=0.080646Jy sigma=0.614319 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.080646Jy sigma=0.614319 ! Fit after self-cal, rms=0.064415Jy sigma=0.458347 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.77 mas, bmaj=7.086 mas, bpa=-20.96 degrees ! Estimated noise=2.30256 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00171357 Jy ! Component: 100 - total flux cleaned = 0.00180101 Jy ! Component: 150 - total flux cleaned = 0.0018762 Jy ! Component: 200 - total flux cleaned = 0.00199915 Jy ! Total flux subtracted in 200 components = 0.00199915 Jy ! Clean residual min=-0.004080 max=0.004402 Jy/beam ! Clean residual mean=0.000010 rms=0.001109 Jy/beam ! Combined flux in latest and established models = 0.382583 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 39 components and 0.382583 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.064148Jy sigma=0.456739 ! Fit after self-cal, rms=0.064216Jy sigma=0.456572 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.24154e-05 Jy ! Component: 100 - total flux cleaned = 2.93996e-05 Jy ! Component: 150 - total flux cleaned = 7.05417e-05 Jy ! Component: 200 - total flux cleaned = 0.000106893 Jy ! Total flux subtracted in 200 components = 0.000106893 Jy ! Clean residual min=-0.003976 max=0.004329 Jy/beam ! Clean residual mean=0.000010 rms=0.001098 Jy/beam ! Combined flux in latest and established models = 0.382689 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 41 components and 0.382689 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.064132Jy sigma=0.456244 ! Fit after self-cal, rms=0.064128Jy sigma=0.456229 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.064128Jy sigma=0.456229 ! Fit after self-cal, rms=0.064252Jy sigma=0.455506 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.77 mas, bmaj=7.066 mas, bpa=-20.77 degrees ! Estimated noise=2.30799 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00185372 Jy ! Component: 100 - total flux cleaned = 0.00215796 Jy ! Component: 150 - total flux cleaned = 0.00220235 Jy ! Component: 200 - total flux cleaned = 0.00223971 Jy ! Total flux subtracted in 200 components = 0.00223971 Jy ! Clean residual min=-0.003982 max=0.004258 Jy/beam ! Clean residual mean=0.000010 rms=0.001073 Jy/beam ! Combined flux in latest and established models = 0.384929 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 49 components and 0.384929 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.064142Jy sigma=0.454975 ! Fit after self-cal, rms=0.064139Jy sigma=0.454964 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.69661e-05 Jy ! Component: 100 - total flux cleaned = 1.65661e-05 Jy ! Component: 150 - total flux cleaned = -1.09157e-05 Jy ! Component: 200 - total flux cleaned = 1.54276e-05 Jy ! Total flux subtracted in 200 components = 1.54276e-05 Jy ! Clean residual min=-0.003931 max=0.004201 Jy/beam ! Clean residual mean=0.000010 rms=0.001068 Jy/beam ! Combined flux in latest and established models = 0.384945 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 51 components and 0.384945 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.064107Jy sigma=0.454808 ! Fit after self-cal, rms=0.064106Jy sigma=0.454803 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.064106Jy sigma=0.454803 ! Fit after self-cal, rms=0.064243Jy sigma=0.454466 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.883 mas, bmaj=9.981 mas, bpa=-22.83 degrees ! Estimated noise=2.70432 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00210654 Jy ! Component: 100 - total flux cleaned = 0.00232727 Jy ! Component: 150 - total flux cleaned = 0.00235567 Jy ! Component: 200 - total flux cleaned = 0.00237768 Jy ! Total flux subtracted in 200 components = 0.00237768 Jy ! Clean residual min=-0.004178 max=0.004785 Jy/beam ! Clean residual mean=0.000019 rms=0.001251 Jy/beam ! Combined flux in latest and established models = 0.387322 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 52 components and 0.387322 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.064209Jy sigma=0.454404 ! Fit after self-cal, rms=0.064199Jy sigma=0.454365 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000208082 Jy ! Component: 100 - total flux cleaned = 0.000137296 Jy ! Component: 150 - total flux cleaned = 9.76861e-05 Jy ! Component: 200 - total flux cleaned = 8.638e-05 Jy ! Total flux subtracted in 200 components = 8.638e-05 Jy ! Clean residual min=-0.004149 max=0.004784 Jy/beam ! Clean residual mean=0.000019 rms=0.001248 Jy/beam ! Combined flux in latest and established models = 0.387409 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 58 components and 0.387409 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.064201Jy sigma=0.454395 ! Fit after self-cal, rms=0.064193Jy sigma=0.454379 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.768 mas, bmaj=7.051 mas, bpa=-20.66 degrees ! Estimated noise=2.3129 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.768 x 7.051 at -20.66 degrees (North through East) ! Clean map min=-0.003976 max=0.37593 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.377 mas, bmaj=6.452 mas, bpa=-20.73 degrees ! Estimated noise=2.71308 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.2948 Jy ! Component: 100 - total flux cleaned = 0.359086 Jy ! Component: 150 - total flux cleaned = 0.374322 Jy ! Component: 200 - total flux cleaned = 0.380524 Jy ! Total flux subtracted in 200 components = 0.380524 Jy ! Clean residual min=-0.005201 max=0.005305 Jy/beam ! Clean residual mean=0.000012 rms=0.001404 Jy/beam ! Combined flux in latest and established models = 0.380524 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.380524 Jy ! Inverting map and beam ! Estimated beam: bmin=3.768 mas, bmaj=7.051 mas, bpa=-20.66 degrees ! Estimated noise=2.3129 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00320847 Jy ! Component: 100 - total flux cleaned = 0.00425211 Jy ! Component: 150 - total flux cleaned = 0.00499852 Jy ! Component: 200 - total flux cleaned = 0.00553678 Jy ! Total flux subtracted in 200 components = 0.00553678 Jy ! Clean residual min=-0.003997 max=0.004103 Jy/beam ! Clean residual mean=0.000011 rms=0.001092 Jy/beam ! Combined flux in latest and established models = 0.386061 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 32 components and 0.386061 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.883 mas, bmaj=9.981 mas, bpa=-22.83 degrees ! Estimated noise=2.70432 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000898003 Jy ! Component: 100 - total flux cleaned = 0.00111194 Jy ! Component: 150 - total flux cleaned = 0.00126846 Jy ! Component: 200 - total flux cleaned = 0.00131941 Jy ! Total flux subtracted in 200 components = 0.00131941 Jy ! Clean residual min=-0.004166 max=0.004870 Jy/beam ! Clean residual mean=0.000019 rms=0.001266 Jy/beam ! Combined flux in latest and established models = 0.38738 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.81776e-07 Jy ! Component: 100 - total flux cleaned = 1.52122e-08 Jy ! Component: 150 - total flux cleaned = 9.1015e-07 Jy ! Component: 200 - total flux cleaned = 1.93119e-05 Jy ! Total flux subtracted in 200 components = 1.93119e-05 Jy ! Clean residual min=-0.004153 max=0.004880 Jy/beam ! Clean residual mean=0.000019 rms=0.001263 Jy/beam ! Combined flux in latest and established models = 0.3874 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 44 components and 0.3874 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.768 mas, bmaj=7.051 mas, bpa=-20.66 degrees ! Estimated noise=2.3129 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000123132 Jy ! Component: 100 - total flux cleaned = -1.31196e-05 Jy ! Component: 150 - total flux cleaned = -9.46666e-05 Jy ! Component: 200 - total flux cleaned = -0.000202128 Jy ! Total flux subtracted in 200 components = -0.000202128 Jy ! Clean residual min=-0.003932 max=0.004158 Jy/beam ! Clean residual mean=0.000010 rms=0.001068 Jy/beam ! Combined flux in latest and established models = 0.387198 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 52 components and 0.387198 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.064213Jy sigma=0.454705 ! Fit after self-cal, rms=0.064205Jy sigma=0.454681 wmodel J0013+4051_S_a_map.mod ! Writing 52 model components to file: J0013+4051_S_a_map.mod wobs J0013+4051_S_a_uvs.fits ! Writing UV FITS file: J0013+4051_S_a_uvs.fits wwins J0013+4051_S_a_map.win ! wwins: Wrote 1 windows to J0013+4051_S_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000864996 Jy ! Component: 100 - total flux cleaned = 0.000792094 Jy ! Component: 150 - total flux cleaned = 0.00058936 Jy ! Component: 200 - total flux cleaned = 0.00077917 Jy ! Component: 250 - total flux cleaned = 0.000714909 Jy ! Component: 300 - total flux cleaned = 0.000595954 Jy ! Component: 350 - total flux cleaned = 0.000711853 Jy ! Component: 400 - total flux cleaned = 0.000767225 Jy ! Component: 450 - total flux cleaned = 0.000875147 Jy ! Component: 500 - total flux cleaned = 0.000927537 Jy ! Component: 550 - total flux cleaned = 0.00103191 Jy ! Component: 600 - total flux cleaned = 0.00108239 Jy ! Component: 650 - total flux cleaned = 0.00118114 Jy ! Component: 700 - total flux cleaned = 0.00122925 Jy ! Component: 750 - total flux cleaned = 0.00113404 Jy ! Component: 800 - total flux cleaned = 0.00104129 Jy ! Component: 850 - total flux cleaned = 0.00104206 Jy ! Component: 900 - total flux cleaned = 0.000906371 Jy ! Component: 950 - total flux cleaned = 0.000729125 Jy ! Component: 1000 - total flux cleaned = 0.000641557 Jy ! Component: 1050 - total flux cleaned = 0.000385005 Jy ! Component: 1100 - total flux cleaned = 0.000174521 Jy ! Component: 1150 - total flux cleaned = 0.000132646 Jy ! Component: 1200 - total flux cleaned = -0.000111356 Jy ! Component: 1250 - total flux cleaned = -0.000151157 Jy ! Component: 1300 - total flux cleaned = -0.000151725 Jy ! Component: 1350 - total flux cleaned = -0.000308063 Jy ! Component: 1400 - total flux cleaned = -0.000270221 Jy ! Component: 1450 - total flux cleaned = -0.000384654 Jy ! Component: 1500 - total flux cleaned = -0.0004599 Jy ! Component: 1550 - total flux cleaned = -0.00060752 Jy ! Component: 1600 - total flux cleaned = -0.000608363 Jy ! Component: 1650 - total flux cleaned = -0.000751535 Jy ! Component: 1700 - total flux cleaned = -0.000787206 Jy ! Component: 1750 - total flux cleaned = -0.00071638 Jy ! Component: 1800 - total flux cleaned = -0.000750734 Jy ! Component: 1850 - total flux cleaned = -0.000819222 Jy ! Component: 1900 - total flux cleaned = -0.000751164 Jy ! Component: 1950 - total flux cleaned = -0.000751734 Jy ! Component: 2000 - total flux cleaned = -0.000883695 Jy ! Component: 2050 - total flux cleaned = -0.000883531 Jy ! Component: 2100 - total flux cleaned = -0.000915735 Jy ! Component: 2150 - total flux cleaned = -0.000947359 Jy ! Component: 2200 - total flux cleaned = -0.000884375 Jy ! Component: 2250 - total flux cleaned = -0.00097837 Jy ! Component: 2300 - total flux cleaned = -0.00100938 Jy ! Component: 2350 - total flux cleaned = -0.00100931 Jy ! Component: 2400 - total flux cleaned = -0.000919038 Jy ! Component: 2450 - total flux cleaned = -0.000889382 Jy ! Component: 2500 - total flux cleaned = -0.000948425 Jy ! Component: 2550 - total flux cleaned = -0.000918717 Jy ! Component: 2600 - total flux cleaned = -0.000831359 Jy ! Component: 2650 - total flux cleaned = -0.000831212 Jy ! Component: 2700 - total flux cleaned = -0.000802858 Jy ! Component: 2750 - total flux cleaned = -0.000831154 Jy ! Component: 2800 - total flux cleaned = -0.000747067 Jy ! Component: 2850 - total flux cleaned = -0.000747252 Jy ! Component: 2900 - total flux cleaned = -0.000774519 Jy ! Component: 2950 - total flux cleaned = -0.0007472 Jy ! Component: 3000 - total flux cleaned = -0.000747121 Jy ! Component: 3050 - total flux cleaned = -0.000801066 Jy ! Component: 3100 - total flux cleaned = -0.000774639 Jy ! Component: 3150 - total flux cleaned = -0.000748077 Jy ! Component: 3200 - total flux cleaned = -0.000774355 Jy ! Component: 3250 - total flux cleaned = -0.000722287 Jy ! Component: 3300 - total flux cleaned = -0.000748001 Jy ! Component: 3350 - total flux cleaned = -0.000697177 Jy ! Component: 3400 - total flux cleaned = -0.000621089 Jy ! Component: 3450 - total flux cleaned = -0.000595613 Jy ! Component: 3500 - total flux cleaned = -0.000570617 Jy ! Component: 3550 - total flux cleaned = -0.000521294 Jy ! Component: 3600 - total flux cleaned = -0.000496593 Jy ! Component: 3650 - total flux cleaned = -0.000472213 Jy ! Component: 3700 - total flux cleaned = -0.000471865 Jy ! Component: 3750 - total flux cleaned = -0.000423822 Jy ! Component: 3800 - total flux cleaned = -0.000400001 Jy ! Component: 3850 - total flux cleaned = -0.000494762 Jy ! Component: 3900 - total flux cleaned = -0.000423864 Jy ! Component: 3950 - total flux cleaned = -0.000400406 Jy ! Component: 4000 - total flux cleaned = -0.000470094 Jy ! Component: 4050 - total flux cleaned = -0.000354587 Jy ! Total flux subtracted in 4096 components = -0.00030887 Jy ! Clean residual min=-0.001221 max=0.001523 Jy/beam ! Clean residual mean=0.000001 rms=0.000418 Jy/beam ! Combined flux in latest and established models = 0.386889 Jy keep ! Adding 285 model components to the UV plane model. ! The established model now contains 337 components and 0.386889 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0013+4051_S_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.768 x 7.051 at -20.66 degrees (North through East) ! Clean map min=-0.0031473 max=0.37543 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0013+4051_S_a_map.fits wmodel /image_prod/ug002_uva//J0013+4051_S_a_map.mod ! Writing 337 model components to file: /image_prod/ug002_uva//J0013+4051_S_a_map.mod wobs /image_prod/ug002_uva//J0013+4051_S_a_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0013+4051_S_a_uvs.fits wwins /image_prod/ug002_uva//J0013+4051_S_a_map.win ! wwins: Wrote 2 windows to /image_prod/ug002_uva//J0013+4051_S_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.375428 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000412508 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.32963 0.32963 0.659261 1.31852 2.63704 5.27408 10.5482 21.0963 42.1927 84.3854 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.375 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 910.11 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0013+4051_S_a_dfm.log closed on Wed Mar 4 18:18:35 2020