! Started logfile: /image_prod/ug002_uva//J0010-0433_S_dfm.log on Wed Mar  4 18:16:05 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J0010-0433_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J0010-0433_S_uva.fits
! AN table 1: 60 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.949074 visibilities/baseline/integration-bin.
! Found source: J0010-0433
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 6150 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0010-0433_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.053587Jy  sigma=7.203284
! Fit after  self-cal, rms=0.654972Jy  sigma=4.583643
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.587 mas, bmaj=6.732 mas, bpa=-3.405 degrees
! Estimated noise=1.78203 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.268151 Jy
! Component: 100  -  total flux cleaned = 0.326626 Jy
! Total flux subtracted in 100 components = 0.326626 Jy
! Clean residual min=-0.010774 max=0.018074 Jy/beam
! Clean residual mean=-0.000012 rms=0.003371 Jy/beam
! Combined flux in latest and established models = 0.326626 Jy
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 0.326626 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.107491Jy  sigma=0.560688
! Fit after  self-cal, rms=0.107488Jy  sigma=0.560676
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.032 mas, bmaj=7.665 mas, bpa=-3.173 degrees
! Estimated noise=1.34889 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0163947 Jy
! Component: 100  -  total flux cleaned = 0.0230371 Jy
! Component: 150  -  total flux cleaned = 0.0242772 Jy
! Component: 200  -  total flux cleaned = 0.0247073 Jy
! Total flux subtracted in 200 components = 0.0247073 Jy
! Clean residual min=-0.009900 max=0.012161 Jy/beam
! Clean residual mean=-0.000015 rms=0.002773 Jy/beam
! Combined flux in latest and established models = 0.351333 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 21 components and 0.351333 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.103711Jy  sigma=0.545179
! Fit after  self-cal, rms=0.103711Jy  sigma=0.545135
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.032 x 7.665 at -3.173 degrees (North through East)
! Clean map  min=-0.0097067  max=0.34633 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.91     HN        1.09     KP        0.97     
!   LA        1.05     MK        0.96     NL        0.99     OV        1.00     
!   SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.85     FD        0.94     HN        1.05     KP        1.00     
!   LA        1.05     MK        0.95     NL        0.99     OV        0.97     
!   SC        1.05     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.91     HN        1.34     KP        1.00     
!   LA        1.04     MK        0.95     NL        1.04     OV        1.00     
!   SC        1.00     
! 
! 
! Fit before self-cal, rms=0.103711Jy  sigma=0.545135
! Fit after  self-cal, rms=0.090660Jy  sigma=0.498093
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.027 mas, bmaj=7.666 mas, bpa=-3.4 degrees
! Estimated noise=1.34828 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00297298 Jy
! Component: 100  -  total flux cleaned = 0.00303586 Jy
! Component: 150  -  total flux cleaned = 0.003037 Jy
! Component: 200  -  total flux cleaned = 0.00294511 Jy
! Total flux subtracted in 200 components = 0.00294511 Jy
! Clean residual min=-0.009826 max=0.008177 Jy/beam
! Clean residual mean=-0.000006 rms=0.001871 Jy/beam
! Combined flux in latest and established models = 0.354278 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 30 components and 0.354278 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.090382Jy  sigma=0.498033
! Fit after  self-cal, rms=0.090409Jy  sigma=0.497919
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.090409Jy  sigma=0.497919
! Fit after  self-cal, rms=0.073166Jy  sigma=0.440895
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.028 mas, bmaj=7.664 mas, bpa=-3.354 degrees
! Estimated noise=1.34672 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000996401 Jy
! Component: 100  -  total flux cleaned = -0.000996948 Jy
! Component: 150  -  total flux cleaned = -0.000996598 Jy
! Component: 200  -  total flux cleaned = -0.00102012 Jy
! Total flux subtracted in 200 components = -0.00102012 Jy
! Clean residual min=-0.002165 max=0.002487 Jy/beam
! Clean residual mean=-0.000002 rms=0.000531 Jy/beam
! Combined flux in latest and established models = 0.353258 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 33 components and 0.353258 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.073132Jy  sigma=0.440608
! Fit after  self-cal, rms=0.073144Jy  sigma=0.440494
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-113.5, -50).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00145232 Jy
! Component: 100  -  total flux cleaned = 0.00145599 Jy
! Component: 150  -  total flux cleaned = 0.00149309 Jy
! Component: 200  -  total flux cleaned = 0.0014232 Jy
! Total flux subtracted in 200 components = 0.0014232 Jy
! Clean residual min=-0.002277 max=0.002027 Jy/beam
! Clean residual mean=-0.000002 rms=0.000505 Jy/beam
! Combined flux in latest and established models = 0.354681 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 49 components and 0.354681 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.073057Jy  sigma=0.440006
! Fit after  self-cal, rms=0.073054Jy  sigma=0.439980
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.073054Jy  sigma=0.439980
! Fit after  self-cal, rms=0.073047Jy  sigma=0.439932
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.029 mas, bmaj=7.663 mas, bpa=-3.308 degrees
! Estimated noise=1.34654 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000208862 Jy
! Component: 100  -  total flux cleaned = -0.000209413 Jy
! Component: 150  -  total flux cleaned = -0.000154912 Jy
! Component: 200  -  total flux cleaned = -0.000130924 Jy
! Total flux subtracted in 200 components = -0.000130924 Jy
! Clean residual min=-0.002193 max=0.002140 Jy/beam
! Clean residual mean=-0.000002 rms=0.000497 Jy/beam
! Combined flux in latest and established models = 0.35455 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 59 components and 0.35455 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.073019Jy  sigma=0.439786
! Fit after  self-cal, rms=0.073021Jy  sigma=0.439779
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (109.5, -64.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00119777 Jy
! Component: 100  -  total flux cleaned = 0.0011068 Jy
! Component: 150  -  total flux cleaned = 0.000929233 Jy
! Component: 200  -  total flux cleaned = 0.000831695 Jy
! Total flux subtracted in 200 components = 0.000831695 Jy
! Clean residual min=-0.001886 max=0.001940 Jy/beam
! Clean residual mean=-0.000002 rms=0.000471 Jy/beam
! Combined flux in latest and established models = 0.355382 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 75 components and 0.355382 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.072949Jy  sigma=0.439387
! Fit after  self-cal, rms=0.072947Jy  sigma=0.439366
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.072947Jy  sigma=0.439366
! Fit after  self-cal, rms=0.072945Jy  sigma=0.439328
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.051 mas, bmaj=12.48 mas, bpa=-0.2682 degrees
! Estimated noise=1.70339 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000196022 Jy
! Component: 100  -  total flux cleaned = -3.66165e-05 Jy
! Component: 150  -  total flux cleaned = 2.8139e-06 Jy
! Component: 200  -  total flux cleaned = 1.70415e-06 Jy
! Total flux subtracted in 200 components = 1.70415e-06 Jy
! Clean residual min=-0.001655 max=0.001526 Jy/beam
! Clean residual mean=-0.000004 rms=0.000434 Jy/beam
! Combined flux in latest and established models = 0.355384 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 88 components and 0.355384 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.072934Jy  sigma=0.439266
! Fit after  self-cal, rms=0.072936Jy  sigma=0.439261
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.73381e-05 Jy
! Component: 100  -  total flux cleaned = -5.62057e-06 Jy
! Component: 150  -  total flux cleaned = -3.28045e-05 Jy
! Component: 200  -  total flux cleaned = -4.58626e-05 Jy
! Total flux subtracted in 200 components = -4.58626e-05 Jy
! Clean residual min=-0.001660 max=0.001497 Jy/beam
! Clean residual mean=-0.000004 rms=0.000431 Jy/beam
! Combined flux in latest and established models = 0.355338 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 100 components and 0.355338 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.072931Jy  sigma=0.439256
! Fit after  self-cal, rms=0.072932Jy  sigma=0.439254
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.029 mas, bmaj=7.663 mas, bpa=-3.282 degrees
! Estimated noise=1.34621 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.029 x 7.663 at -3.282 degrees (North through East)
! Clean map  min=-0.0017437  max=0.3461 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.58 mas, bmaj=6.749 mas, bpa=-3.374 degrees
! Estimated noise=1.78137 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.268038 Jy
! Component: 100  -  total flux cleaned = 0.32649 Jy
! Component: 150  -  total flux cleaned = 0.341419 Jy
! Component: 200  -  total flux cleaned = 0.347818 Jy
! Total flux subtracted in 200 components = 0.347818 Jy
! Clean residual min=-0.003987 max=0.003258 Jy/beam
! Clean residual mean=-0.000001 rms=0.000835 Jy/beam
! Combined flux in latest and established models = 0.347818 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.347818 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.029 mas, bmaj=7.663 mas, bpa=-3.282 degrees
! Estimated noise=1.34621 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00397913 Jy
! Component: 100  -  total flux cleaned = 0.00641375 Jy
! Component: 150  -  total flux cleaned = 0.00700077 Jy
! Component: 200  -  total flux cleaned = 0.00706086 Jy
! Total flux subtracted in 200 components = 0.00706086 Jy
! Clean residual min=-0.001961 max=0.001987 Jy/beam
! Clean residual mean=-0.000002 rms=0.000499 Jy/beam
! Combined flux in latest and established models = 0.354879 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 38 components and 0.354879 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.051 mas, bmaj=12.48 mas, bpa=-0.2682 degrees
! Estimated noise=1.70339 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000432767 Jy
! Component: 100  -  total flux cleaned = 0.000604078 Jy
! Component: 150  -  total flux cleaned = 0.000608578 Jy
! Component: 200  -  total flux cleaned = 0.000520636 Jy
! Total flux subtracted in 200 components = 0.000520636 Jy
! Clean residual min=-0.001501 max=0.001502 Jy/beam
! Clean residual mean=-0.000004 rms=0.000437 Jy/beam
! Combined flux in latest and established models = 0.3554 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.93084e-05 Jy
! Component: 100  -  total flux cleaned = -7.53619e-05 Jy
! Component: 150  -  total flux cleaned = -9.29705e-05 Jy
! Component: 200  -  total flux cleaned = -0.000109088 Jy
! Total flux subtracted in 200 components = -0.000109088 Jy
! Clean residual min=-0.001473 max=0.001472 Jy/beam
! Clean residual mean=-0.000004 rms=0.000428 Jy/beam
! Combined flux in latest and established models = 0.35529 Jy
! Adding 41 model components to the UV plane model.
! The established model now contains 75 components and 0.35529 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.029 mas, bmaj=7.663 mas, bpa=-3.282 degrees
! Estimated noise=1.34621 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000167851 Jy
! Component: 100  -  total flux cleaned = 4.76421e-05 Jy
! Component: 150  -  total flux cleaned = 4.86533e-05 Jy
! Component: 200  -  total flux cleaned = 1.64534e-05 Jy
! Total flux subtracted in 200 components = 1.64534e-05 Jy
! Clean residual min=-0.001822 max=0.001978 Jy/beam
! Clean residual mean=-0.000002 rms=0.000466 Jy/beam
! Combined flux in latest and established models = 0.355307 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 90 components and 0.355307 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.072974Jy  sigma=0.439391
! Fit after  self-cal, rms=0.072971Jy  sigma=0.439369
wmodel J0010-0433_S_map.mod
! Writing 90 model components to file: J0010-0433_S_map.mod
wobs   J0010-0433_S_uvs.fits
! Writing UV FITS file: J0010-0433_S_uvs.fits
wwins  J0010-0433_S_map.win
! wwins: Wrote 3 windows to J0010-0433_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000404935 Jy
! Component: 100  -  total flux cleaned = 0.000631209 Jy
! Component: 150  -  total flux cleaned = 0.00075237 Jy
! Component: 200  -  total flux cleaned = 0.000781938 Jy
! Component: 250  -  total flux cleaned = 0.000725681 Jy
! Component: 300  -  total flux cleaned = 0.000670676 Jy
! Component: 350  -  total flux cleaned = 0.000564283 Jy
! Component: 400  -  total flux cleaned = 0.0005127 Jy
! Component: 450  -  total flux cleaned = 0.00048763 Jy
! Component: 500  -  total flux cleaned = 0.000512248 Jy
! Component: 550  -  total flux cleaned = 0.000463254 Jy
! Component: 600  -  total flux cleaned = 0.000391765 Jy
! Component: 650  -  total flux cleaned = 0.000298117 Jy
! Component: 700  -  total flux cleaned = 0.000138384 Jy
! Component: 750  -  total flux cleaned = 4.91485e-05 Jy
! Component: 800  -  total flux cleaned = -0.000104801 Jy
! Component: 850  -  total flux cleaned = -0.000169677 Jy
! Component: 900  -  total flux cleaned = -0.000255159 Jy
! Component: 950  -  total flux cleaned = -0.000318643 Jy
! Component: 1000  -  total flux cleaned = -0.000443011 Jy
! Component: 1050  -  total flux cleaned = -0.000524445 Jy
! Component: 1100  -  total flux cleaned = -0.000605206 Jy
! Component: 1150  -  total flux cleaned = -0.000763951 Jy
! Component: 1200  -  total flux cleaned = -0.000783482 Jy
! Component: 1250  -  total flux cleaned = -0.000822395 Jy
! Component: 1300  -  total flux cleaned = -0.000937114 Jy
! Component: 1350  -  total flux cleaned = -0.0010875 Jy
! Component: 1400  -  total flux cleaned = -0.00112509 Jy
! Component: 1450  -  total flux cleaned = -0.00119869 Jy
! Component: 1500  -  total flux cleaned = -0.00134321 Jy
! Component: 1550  -  total flux cleaned = -0.00141435 Jy
! Component: 1600  -  total flux cleaned = -0.00139662 Jy
! Component: 1650  -  total flux cleaned = -0.0015542 Jy
! Component: 1700  -  total flux cleaned = -0.00162325 Jy
! Component: 1750  -  total flux cleaned = -0.00165721 Jy
! Component: 1800  -  total flux cleaned = -0.00167413 Jy
! Component: 1850  -  total flux cleaned = -0.00170761 Jy
! Component: 1900  -  total flux cleaned = -0.00177387 Jy
! Component: 1950  -  total flux cleaned = -0.00185553 Jy
! Component: 2000  -  total flux cleaned = -0.00187159 Jy
! Component: 2050  -  total flux cleaned = -0.00193568 Jy
! Component: 2100  -  total flux cleaned = -0.00199886 Jy
! Component: 2150  -  total flux cleaned = -0.00204587 Jy
! Component: 2200  -  total flux cleaned = -0.00209261 Jy
! Component: 2250  -  total flux cleaned = -0.00215439 Jy
! Component: 2300  -  total flux cleaned = -0.00227625 Jy
! Component: 2350  -  total flux cleaned = -0.00229108 Jy
! Component: 2400  -  total flux cleaned = -0.002321 Jy
! Component: 2450  -  total flux cleaned = -0.00248351 Jy
! Component: 2500  -  total flux cleaned = -0.00252719 Jy
! Component: 2550  -  total flux cleaned = -0.00254166 Jy
! Component: 2600  -  total flux cleaned = -0.00261345 Jy
! Component: 2650  -  total flux cleaned = -0.00267053 Jy
! Component: 2700  -  total flux cleaned = -0.00278367 Jy
! Component: 2750  -  total flux cleaned = -0.00281153 Jy
! Component: 2800  -  total flux cleaned = -0.00293645 Jy
! Component: 2850  -  total flux cleaned = -0.00295027 Jy
! Component: 2900  -  total flux cleaned = -0.00307319 Jy
! Component: 2950  -  total flux cleaned = -0.00311384 Jy
! Component: 3000  -  total flux cleaned = -0.00318089 Jy
! Component: 3050  -  total flux cleaned = -0.00323399 Jy
! Component: 3100  -  total flux cleaned = -0.00329985 Jy
! Component: 3150  -  total flux cleaned = -0.00328682 Jy
! Component: 3200  -  total flux cleaned = -0.00340366 Jy
! Component: 3250  -  total flux cleaned = -0.00342938 Jy
! Component: 3300  -  total flux cleaned = -0.00351874 Jy
! Component: 3350  -  total flux cleaned = -0.00353132 Jy
! Component: 3400  -  total flux cleaned = -0.00359415 Jy
! Component: 3450  -  total flux cleaned = -0.00369402 Jy
! Component: 3500  -  total flux cleaned = -0.00368171 Jy
! Component: 3550  -  total flux cleaned = -0.00379219 Jy
! Component: 3600  -  total flux cleaned = -0.00381664 Jy
! Component: 3650  -  total flux cleaned = -0.00386496 Jy
! Component: 3700  -  total flux cleaned = -0.00397317 Jy
! Component: 3750  -  total flux cleaned = -0.00400901 Jy
! Component: 3800  -  total flux cleaned = -0.00411587 Jy
! Component: 3850  -  total flux cleaned = -0.00419826 Jy
! Component: 3900  -  total flux cleaned = -0.00429174 Jy
! Component: 3950  -  total flux cleaned = -0.00438466 Jy
! Component: 4000  -  total flux cleaned = -0.00445383 Jy
! Component: 4050  -  total flux cleaned = -0.00449966 Jy
! Total flux subtracted in 4096 components = -0.00457945 Jy
! Clean residual min=-0.000719 max=0.000670 Jy/beam
! Clean residual mean=-0.000002 rms=0.000197 Jy/beam
! Combined flux in latest and established models = 0.350728 Jy
keep
! Adding 233 model components to the UV plane model.
! The established model now contains 323 components and 0.350727 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J0010-0433_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.029 x 7.663 at -3.282 degrees (North through East)
! Clean map  min=-0.0016162  max=0.34463 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J0010-0433_S_map.fits
wmodel /image_prod/ug002_uva//J0010-0433_S_map.mod
! Writing 323 model components to file: /image_prod/ug002_uva//J0010-0433_S_map.mod
wobs   /image_prod/ug002_uva//J0010-0433_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J0010-0433_S_uvs.fits
wwins  /image_prod/ug002_uva//J0010-0433_S_map.win
! wwins: Wrote 4 windows to /image_prod/ug002_uva//J0010-0433_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.344628 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000195371 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.170071 0.170071 0.340142 0.680284 1.36057 2.72114 5.44227 10.8845 21.7691 43.5382 87.0764
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.344 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1763.97 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J0010-0433_S_dfm.log closed on Wed Mar  4 18:16:09 2020