! Started logfile: /image_prod/ug002_uva//J0010+1724_X_dfm.log on Wed Mar 4 18:15:35 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J0010+1724_X_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0010+1724_X_uva.fits ! AN table 1: 60 integrations on 36 of 36 possible baselines. ! AN table 2: 30 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.980247 visibilities/baseline/integration-bin. ! Found source: J0010+1724 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 38112 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0010+1724_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 9. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 10. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 11. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 12. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.041676Jy sigma=8.935660 ! Fit after self-cal, rms=0.748569Jy sigma=6.442797 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6496 mas, bmaj=1.666 mas, bpa=-3.727 degrees ! Estimated noise=0.923111 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.172491 Jy ! Component: 100 - total flux cleaned = 0.229988 Jy ! Total flux subtracted in 100 components = 0.229988 Jy ! Clean residual min=-0.015768 max=0.033128 Jy/beam ! Clean residual mean=0.000010 rms=0.003404 Jy/beam ! Combined flux in latest and established models = 0.229988 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.229988 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.112810Jy sigma=0.932667 ! Fit after self-cal, rms=0.112762Jy sigma=0.932305 ! Inverting map ! Added new window around map position (-1.6, -0.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0344177 Jy ! Component: 100 - total flux cleaned = 0.0565393 Jy ! Total flux subtracted in 100 components = 0.0565393 Jy ! Clean residual min=-0.012393 max=0.024938 Jy/beam ! Clean residual mean=0.000007 rms=0.002598 Jy/beam ! Combined flux in latest and established models = 0.286527 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 18 components and 0.286527 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.090382Jy sigma=0.747628 ! Fit after self-cal, rms=0.089549Jy sigma=0.738110 ! Inverting map ! Added new window around map position (-2.4, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0236066 Jy ! Component: 100 - total flux cleaned = 0.0383217 Jy ! Total flux subtracted in 100 components = 0.0383217 Jy ! Clean residual min=-0.009532 max=0.018254 Jy/beam ! Clean residual mean=0.000006 rms=0.002002 Jy/beam ! Combined flux in latest and established models = 0.324849 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 26 components and 0.324849 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.077227Jy sigma=0.637867 ! Fit after self-cal, rms=0.076439Jy sigma=0.629000 ! Inverting map ! Added new window around map position (-4, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0171972 Jy ! Component: 100 - total flux cleaned = 0.0283413 Jy ! Total flux subtracted in 100 components = 0.0283413 Jy ! Clean residual min=-0.007746 max=0.012345 Jy/beam ! Clean residual mean=0.000004 rms=0.001551 Jy/beam ! Combined flux in latest and established models = 0.35319 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 37 components and 0.35319 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069242Jy sigma=0.571564 ! Fit after self-cal, rms=0.068886Jy sigma=0.567690 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0103351 Jy ! Component: 100 - total flux cleaned = 0.0181403 Jy ! Total flux subtracted in 100 components = 0.0181403 Jy ! Clean residual min=-0.006877 max=0.009646 Jy/beam ! Clean residual mean=0.000003 rms=0.001347 Jy/beam ! Combined flux in latest and established models = 0.371331 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 41 components and 0.371331 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065251Jy sigma=0.538856 ! Fit after self-cal, rms=0.065083Jy sigma=0.536922 ! Inverting map ! Added new window around map position (1.2, 0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00875461 Jy ! Component: 100 - total flux cleaned = 0.0152818 Jy ! Total flux subtracted in 100 components = 0.0152818 Jy ! Clean residual min=-0.006381 max=0.006296 Jy/beam ! Clean residual mean=0.000002 rms=0.001197 Jy/beam ! Combined flux in latest and established models = 0.386612 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 45 components and 0.386612 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062529Jy sigma=0.516164 ! Fit after self-cal, rms=0.062504Jy sigma=0.515847 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8336 mas, bmaj=1.992 mas, bpa=-2.612 degrees ! Estimated noise=0.427155 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.8, 0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0117057 Jy ! Component: 100 - total flux cleaned = 0.0200472 Jy ! Component: 150 - total flux cleaned = 0.026521 Jy ! Component: 200 - total flux cleaned = 0.0316486 Jy ! Total flux subtracted in 200 components = 0.0316486 Jy ! Clean residual min=-0.006124 max=0.007054 Jy/beam ! Clean residual mean=-0.000001 rms=0.001428 Jy/beam ! Combined flux in latest and established models = 0.418261 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 82 components and 0.418261 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059357Jy sigma=0.490403 ! Fit after self-cal, rms=0.059296Jy sigma=0.489747 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8336 x 1.992 at -2.612 degrees (North through East) ! Clean map min=-0.0059168 max=0.23051 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.03 KP 1.07 LA 1.01 ! MK 1.02 NL 1.07 OV 0.93 PT 0.90 ! SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 FD 1.04 HN 1.02 KP 1.08 ! LA 1.01 MK 1.06 OV 0.96 PT 0.91 ! SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.02 KP 1.07 LA 1.01 ! MK 1.03 NL 1.08 OV 0.94 PT 0.90 ! SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.96 FD 1.03 HN 1.02 KP 1.08 ! LA 1.03 MK 1.04 OV 0.94 PT 0.90 ! SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.01 KP 1.08 LA 1.00 ! MK 1.03 NL 1.10 OV 0.94 PT 0.89 ! SC 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 1.02 HN 1.03 KP 1.08 ! LA 1.02 MK 1.03 OV 0.95 PT 0.91 ! SC 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.02 KP 1.07 LA 1.01 ! MK 1.01 NL 1.09 OV 0.93 PT 0.90 ! SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 FD 1.02 HN 0.98 KP 1.08 ! LA 1.05 MK 1.02 OV 0.94 PT 0.91 ! SC 0.98 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.01 KP 1.08 LA 0.99 ! MK 1.03 NL 1.07 OV 0.93 PT 0.90 ! SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.96 FD 1.03 HN 1.05 KP 1.07 ! LA 1.01 MK 1.01 OV 0.95 PT 0.90 ! SC 0.99 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.02 KP 1.09 LA 1.00 ! MK 1.02 NL 1.08 OV 0.93 PT 0.90 ! SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 FD 1.01 HN 1.02 KP 1.06 ! LA 1.03 MK 1.04 OV 0.95 PT 0.91 ! SC 1.01 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.01 KP 1.08 LA 1.01 ! MK 1.03 NL 1.09 OV 0.91 PT 0.90 ! SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 1.02 HN 1.02 KP 1.06 ! LA 1.02 MK 1.01 OV 0.93 PT 0.90 ! SC 0.99 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.02 KP 1.08 LA 0.98 ! MK 1.04 NL 1.08 OV 0.93 PT 0.90 ! SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 FD 1.03 HN 0.98 KP 1.06 ! LA 1.02 MK 1.04 OV 0.96 PT 0.89 ! SC 0.99 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.01 KP 1.07 LA 0.99 ! MK 1.02 NL 1.08 OV 0.91 PT 0.91 ! SC 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 FD 1.01 HN 1.01 KP 1.05 ! LA 1.00 MK 1.03 OV 0.95 PT 0.93 ! SC 1.04 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.01 KP 1.07 LA 0.98 ! MK 1.01 NL 1.08 OV 0.92 PT 0.90 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.96 FD 1.03 HN 1.01 KP 1.05 ! LA 1.02 MK 1.03 OV 0.93 PT 0.90 ! SC 1.01 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.99 KP 1.06 LA 0.99 ! MK 0.99 NL 1.07 OV 0.92 PT 0.91 ! SC 1.04 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 FD 0.99 HN 0.99 KP 1.05 ! LA 1.01 MK 1.01 OV 0.94 PT 0.92 ! SC 1.03 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.01 KP 1.08 LA 1.01 ! MK 1.01 NL 1.08 OV 0.94 PT 0.89 ! SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 FD 1.02 HN 1.01 KP 1.06 ! LA 1.03 MK 1.04 OV 0.94 PT 0.91 ! SC 1.04 ! ! ! Fit before self-cal, rms=0.059296Jy sigma=0.489747 ! Fit after self-cal, rms=0.054876Jy sigma=0.455468 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8409 mas, bmaj=2.003 mas, bpa=-2.301 degrees ! Estimated noise=0.426303 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-5.4, -0.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00544586 Jy ! Component: 100 - total flux cleaned = 0.0083468 Jy ! Component: 150 - total flux cleaned = 0.00901182 Jy ! Component: 200 - total flux cleaned = 0.00932069 Jy ! Total flux subtracted in 200 components = 0.00932069 Jy ! Clean residual min=-0.002182 max=0.002494 Jy/beam ! Clean residual mean=0.000001 rms=0.000507 Jy/beam ! Combined flux in latest and established models = 0.427582 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 108 components and 0.427582 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054284Jy sigma=0.449977 ! Fit after self-cal, rms=0.054249Jy sigma=0.449466 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054249Jy sigma=0.449466 ! Fit after self-cal, rms=0.054212Jy sigma=0.448210 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8407 mas, bmaj=2 mas, bpa=-2.249 degrees ! Estimated noise=0.426295 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0019862 Jy ! Component: 100 - total flux cleaned = 0.00286653 Jy ! Component: 150 - total flux cleaned = 0.0031549 Jy ! Component: 200 - total flux cleaned = 0.00345704 Jy ! Total flux subtracted in 200 components = 0.00345704 Jy ! Clean residual min=-0.001761 max=0.001997 Jy/beam ! Clean residual mean=0.000000 rms=0.000396 Jy/beam ! Combined flux in latest and established models = 0.431039 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 122 components and 0.431039 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054054Jy sigma=0.446721 ! Fit after self-cal, rms=0.054040Jy sigma=0.446604 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000581999 Jy ! Component: 100 - total flux cleaned = 0.000675389 Jy ! Component: 150 - total flux cleaned = 0.000715618 Jy ! Component: 200 - total flux cleaned = 0.000715166 Jy ! Total flux subtracted in 200 components = 0.000715166 Jy ! Clean residual min=-0.001680 max=0.001848 Jy/beam ! Clean residual mean=-0.000000 rms=0.000373 Jy/beam ! Combined flux in latest and established models = 0.431754 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 137 components and 0.431754 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053977Jy sigma=0.446059 ! Fit after self-cal, rms=0.053970Jy sigma=0.446021 ! Inverting map ! Added new window around map position (-19.4, -1.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00103815 Jy ! Component: 100 - total flux cleaned = 0.00126903 Jy ! Component: 150 - total flux cleaned = 0.00155181 Jy ! Component: 200 - total flux cleaned = 0.00173257 Jy ! Total flux subtracted in 200 components = 0.00173257 Jy ! Clean residual min=-0.001513 max=0.001379 Jy/beam ! Clean residual mean=0.000000 rms=0.000340 Jy/beam ! Combined flux in latest and established models = 0.433487 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 153 components and 0.433487 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053893Jy sigma=0.445349 ! Fit after self-cal, rms=0.053887Jy sigma=0.445321 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053887Jy sigma=0.445321 ! Fit after self-cal, rms=0.053961Jy sigma=0.445042 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8404 mas, bmaj=1.999 mas, bpa=-2.211 degrees ! Estimated noise=0.426701 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000100696 Jy ! Component: 100 - total flux cleaned = 0.000170875 Jy ! Component: 150 - total flux cleaned = 0.000486729 Jy ! Component: 200 - total flux cleaned = 0.000710936 Jy ! Total flux subtracted in 200 components = 0.000710936 Jy ! Clean residual min=-0.001286 max=0.001342 Jy/beam ! Clean residual mean=0.000000 rms=0.000307 Jy/beam ! Combined flux in latest and established models = 0.434198 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 160 components and 0.434198 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053909Jy sigma=0.444620 ! Fit after self-cal, rms=0.053907Jy sigma=0.444599 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000211221 Jy ! Component: 100 - total flux cleaned = 0.000269504 Jy ! Component: 150 - total flux cleaned = 0.000324302 Jy ! Component: 200 - total flux cleaned = 0.000400175 Jy ! Total flux subtracted in 200 components = 0.000400175 Jy ! Clean residual min=-0.001231 max=0.001297 Jy/beam ! Clean residual mean=0.000000 rms=0.000297 Jy/beam ! Combined flux in latest and established models = 0.434598 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 169 components and 0.434598 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053880Jy sigma=0.444377 ! Fit after self-cal, rms=0.053877Jy sigma=0.444364 ! Inverting map ! Added new window around map position (2.6, -25.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000644368 Jy ! Component: 100 - total flux cleaned = 0.000758126 Jy ! Component: 150 - total flux cleaned = 0.000811758 Jy ! Component: 200 - total flux cleaned = 0.000837697 Jy ! Total flux subtracted in 200 components = 0.000837697 Jy ! Clean residual min=-0.001176 max=0.001182 Jy/beam ! Clean residual mean=0.000000 rms=0.000284 Jy/beam ! Combined flux in latest and established models = 0.435435 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 184 components and 0.435435 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053842Jy sigma=0.444075 ! Fit after self-cal, rms=0.053840Jy sigma=0.444060 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053840Jy sigma=0.444060 ! Fit after self-cal, rms=0.053863Jy sigma=0.443979 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.237 mas, bmaj=3.138 mas, bpa=13.62 degrees ! Estimated noise=0.559248 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000523284 Jy ! Component: 100 - total flux cleaned = -0.000699412 Jy ! Component: 150 - total flux cleaned = -0.000813341 Jy ! Component: 200 - total flux cleaned = -0.000838406 Jy ! Total flux subtracted in 200 components = -0.000838406 Jy ! Clean residual min=-0.001361 max=0.001385 Jy/beam ! Clean residual mean=0.000000 rms=0.000373 Jy/beam ! Combined flux in latest and established models = 0.434597 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 203 components and 0.434597 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053851Jy sigma=0.443874 ! Fit after self-cal, rms=0.053850Jy sigma=0.443866 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000134912 Jy ! Component: 100 - total flux cleaned = 9.49104e-05 Jy ! Component: 150 - total flux cleaned = 7.55868e-05 Jy ! Component: 200 - total flux cleaned = 2.28855e-05 Jy ! Total flux subtracted in 200 components = 2.28855e-05 Jy ! Clean residual min=-0.001358 max=0.001382 Jy/beam ! Clean residual mean=0.000000 rms=0.000363 Jy/beam ! Combined flux in latest and established models = 0.43462 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 217 components and 0.43462 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053848Jy sigma=0.443856 ! Fit after self-cal, rms=0.053848Jy sigma=0.443852 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.84 mas, bmaj=1.999 mas, bpa=-2.175 degrees ! Estimated noise=0.427002 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.84 x 1.999 at -2.175 degrees (North through East) ! Clean map min=-0.0010698 max=0.22989 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6526 mas, bmaj=1.665 mas, bpa=-3.236 degrees ! Estimated noise=0.93443 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.172994 Jy ! Component: 100 - total flux cleaned = 0.236826 Jy ! Component: 150 - total flux cleaned = 0.27679 Jy ! Component: 200 - total flux cleaned = 0.304915 Jy ! Total flux subtracted in 200 components = 0.304915 Jy ! Clean residual min=-0.008278 max=0.016146 Jy/beam ! Clean residual mean=0.000006 rms=0.001935 Jy/beam ! Combined flux in latest and established models = 0.304915 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.304915 Jy ! Inverting map and beam ! Estimated beam: bmin=0.84 mas, bmaj=1.999 mas, bpa=-2.175 degrees ! Estimated noise=0.427002 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0342674 Jy ! Component: 100 - total flux cleaned = 0.0565211 Jy ! Component: 150 - total flux cleaned = 0.0721396 Jy ! Component: 200 - total flux cleaned = 0.0835266 Jy ! Total flux subtracted in 200 components = 0.0835266 Jy ! Clean residual min=-0.003593 max=0.006528 Jy/beam ! Clean residual mean=0.000004 rms=0.001092 Jy/beam ! Combined flux in latest and established models = 0.388442 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 40 components and 0.388442 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00865064 Jy ! Component: 100 - total flux cleaned = 0.0153527 Jy ! Component: 150 - total flux cleaned = 0.0206266 Jy ! Component: 200 - total flux cleaned = 0.0248786 Jy ! Total flux subtracted in 200 components = 0.0248786 Jy ! Clean residual min=-0.001917 max=0.002813 Jy/beam ! Clean residual mean=0.000002 rms=0.000542 Jy/beam ! Combined flux in latest and established models = 0.413321 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 77 components and 0.413321 Jy ! Inverting map ! Added new window around map position (-3.2, 0.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00349666 Jy ! Component: 100 - total flux cleaned = 0.00633554 Jy ! Component: 150 - total flux cleaned = 0.00869237 Jy ! Component: 200 - total flux cleaned = 0.0107175 Jy ! Total flux subtracted in 200 components = 0.0107175 Jy ! Clean residual min=-0.001352 max=0.001693 Jy/beam ! Clean residual mean=0.000001 rms=0.000371 Jy/beam ! Combined flux in latest and established models = 0.424038 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 107 components and 0.424038 Jy ! Inverting map ! Added new window around map position (8, -9.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00187303 Jy ! Component: 100 - total flux cleaned = 0.00345517 Jy ! Component: 150 - total flux cleaned = 0.00485584 Jy ! Component: 200 - total flux cleaned = 0.0060518 Jy ! Total flux subtracted in 200 components = 0.0060518 Jy ! Clean residual min=-0.001137 max=0.001354 Jy/beam ! Clean residual mean=0.000001 rms=0.000305 Jy/beam ! Combined flux in latest and established models = 0.43009 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 129 components and 0.43009 Jy ! Inverting map ! Added new window around map position (-34, -17.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00121928 Jy ! Component: 100 - total flux cleaned = 0.00201276 Jy ! Component: 150 - total flux cleaned = 0.00250634 Jy ! Component: 200 - total flux cleaned = 0.0029591 Jy ! Total flux subtracted in 200 components = 0.0029591 Jy ! Clean residual min=-0.001037 max=0.001061 Jy/beam ! Clean residual mean=0.000001 rms=0.000272 Jy/beam ! Combined flux in latest and established models = 0.433049 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 157 components and 0.433049 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.237 mas, bmaj=3.138 mas, bpa=13.62 degrees ! Estimated noise=0.559248 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000539812 Jy ! Component: 100 - total flux cleaned = 0.000922558 Jy ! Component: 150 - total flux cleaned = 0.00108481 Jy ! Component: 200 - total flux cleaned = 0.00119937 Jy ! Total flux subtracted in 200 components = 0.00119937 Jy ! Clean residual min=-0.001404 max=0.001308 Jy/beam ! Clean residual mean=0.000001 rms=0.000351 Jy/beam ! Combined flux in latest and established models = 0.434248 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000125801 Jy ! Component: 100 - total flux cleaned = 0.000169817 Jy ! Component: 150 - total flux cleaned = 0.000209672 Jy ! Component: 200 - total flux cleaned = 0.0002832 Jy ! Total flux subtracted in 200 components = 0.0002832 Jy ! Clean residual min=-0.001374 max=0.001254 Jy/beam ! Clean residual mean=0.000000 rms=0.000334 Jy/beam ! Combined flux in latest and established models = 0.434531 Jy ! Adding 69 model components to the UV plane model. ! The established model now contains 220 components and 0.434531 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.84 mas, bmaj=1.999 mas, bpa=-2.175 degrees ! Estimated noise=0.427002 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.45937e-05 Jy ! Component: 100 - total flux cleaned = 7.93088e-05 Jy ! Component: 150 - total flux cleaned = 0.000153354 Jy ! Component: 200 - total flux cleaned = 0.000176099 Jy ! Total flux subtracted in 200 components = 0.000176099 Jy ! Clean residual min=-0.000963 max=0.001045 Jy/beam ! Clean residual mean=0.000000 rms=0.000240 Jy/beam ! Combined flux in latest and established models = 0.434707 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 238 components and 0.434707 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053789Jy sigma=0.443364 ! Fit after self-cal, rms=0.053778Jy sigma=0.443283 wmodel J0010+1724_X_map.mod ! Writing 238 model components to file: J0010+1724_X_map.mod wobs J0010+1724_X_uvs.fits ! Writing UV FITS file: J0010+1724_X_uvs.fits wwins J0010+1724_X_map.win ! wwins: Wrote 12 windows to J0010+1724_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000113131 Jy ! Component: 100 - total flux cleaned = 0.00013014 Jy ! Component: 150 - total flux cleaned = 0.000146332 Jy ! Component: 200 - total flux cleaned = 0.000193388 Jy ! Component: 250 - total flux cleaned = 0.00025414 Jy ! Component: 300 - total flux cleaned = 0.000298313 Jy ! Component: 350 - total flux cleaned = 0.000312744 Jy ! Component: 400 - total flux cleaned = 0.00036951 Jy ! Component: 450 - total flux cleaned = 0.000369286 Jy ! Component: 500 - total flux cleaned = 0.000382943 Jy ! Component: 550 - total flux cleaned = 0.000409746 Jy ! Component: 600 - total flux cleaned = 0.000462114 Jy ! Component: 650 - total flux cleaned = 0.000539382 Jy ! Component: 700 - total flux cleaned = 0.000564803 Jy ! Component: 750 - total flux cleaned = 0.000589815 Jy ! Component: 800 - total flux cleaned = 0.00060239 Jy ! Component: 850 - total flux cleaned = 0.000651101 Jy ! Component: 900 - total flux cleaned = 0.000675235 Jy ! Component: 950 - total flux cleaned = 0.000722566 Jy ! Component: 1000 - total flux cleaned = 0.000734484 Jy ! Component: 1050 - total flux cleaned = 0.000803919 Jy ! Component: 1100 - total flux cleaned = 0.000826612 Jy ! Component: 1150 - total flux cleaned = 0.000849036 Jy ! Component: 1200 - total flux cleaned = 0.000826774 Jy ! Component: 1250 - total flux cleaned = 0.00092623 Jy ! Component: 1300 - total flux cleaned = 0.000937159 Jy ! Component: 1350 - total flux cleaned = 0.000980475 Jy ! Component: 1400 - total flux cleaned = 0.00105509 Jy ! Component: 1450 - total flux cleaned = 0.0010446 Jy ! Component: 1500 - total flux cleaned = 0.00108648 Jy ! Component: 1550 - total flux cleaned = 0.00109674 Jy ! Component: 1600 - total flux cleaned = 0.00112765 Jy ! Component: 1650 - total flux cleaned = 0.00116826 Jy ! Component: 1700 - total flux cleaned = 0.00118839 Jy ! Component: 1750 - total flux cleaned = 0.00122819 Jy ! Component: 1800 - total flux cleaned = 0.00123804 Jy ! Component: 1850 - total flux cleaned = 0.00128686 Jy ! Component: 1900 - total flux cleaned = 0.00130627 Jy ! Component: 1950 - total flux cleaned = 0.00133503 Jy ! Component: 2000 - total flux cleaned = 0.00136353 Jy ! Component: 2050 - total flux cleaned = 0.00139168 Jy ! Component: 2100 - total flux cleaned = 0.00140097 Jy ! Component: 2150 - total flux cleaned = 0.00141951 Jy ! Component: 2200 - total flux cleaned = 0.00142864 Jy ! Component: 2250 - total flux cleaned = 0.00142851 Jy ! Component: 2300 - total flux cleaned = 0.00143747 Jy ! Component: 2350 - total flux cleaned = 0.00143748 Jy ! Component: 2400 - total flux cleaned = 0.00144631 Jy ! Component: 2450 - total flux cleaned = 0.00148172 Jy ! Component: 2500 - total flux cleaned = 0.00150796 Jy ! Component: 2550 - total flux cleaned = 0.00147305 Jy ! Component: 2600 - total flux cleaned = 0.00149896 Jy ! Component: 2650 - total flux cleaned = 0.00154185 Jy ! Component: 2700 - total flux cleaned = 0.00154183 Jy ! Component: 2750 - total flux cleaned = 0.00155038 Jy ! Component: 2800 - total flux cleaned = 0.00155034 Jy ! Component: 2850 - total flux cleaned = 0.0016088 Jy ! Component: 2900 - total flux cleaned = 0.00160879 Jy ! Component: 2950 - total flux cleaned = 0.00165823 Jy ! Component: 3000 - total flux cleaned = 0.00164196 Jy ! Component: 3050 - total flux cleaned = 0.00165818 Jy ! Component: 3100 - total flux cleaned = 0.00165822 Jy ! Component: 3150 - total flux cleaned = 0.00170632 Jy ! Component: 3200 - total flux cleaned = 0.00170623 Jy ! Component: 3250 - total flux cleaned = 0.00172996 Jy ! Component: 3300 - total flux cleaned = 0.00170634 Jy ! Component: 3350 - total flux cleaned = 0.00170635 Jy ! Component: 3400 - total flux cleaned = 0.00174514 Jy ! Component: 3450 - total flux cleaned = 0.00175276 Jy ! Component: 3500 - total flux cleaned = 0.00176805 Jy ! Component: 3550 - total flux cleaned = 0.00175289 Jy ! Component: 3600 - total flux cleaned = 0.00179068 Jy ! Component: 3650 - total flux cleaned = 0.00176814 Jy ! Component: 3700 - total flux cleaned = 0.00178304 Jy ! Component: 3750 - total flux cleaned = 0.00177559 Jy ! Component: 3800 - total flux cleaned = 0.00178302 Jy ! Component: 3850 - total flux cleaned = 0.00183437 Jy ! Component: 3900 - total flux cleaned = 0.00184169 Jy ! Component: 3950 - total flux cleaned = 0.00185617 Jy ! Component: 4000 - total flux cleaned = 0.00185612 Jy ! Component: 4050 - total flux cleaned = 0.00181307 Jy ! Total flux subtracted in 4096 components = 0.00185587 Jy ! Clean residual min=-0.000402 max=0.000389 Jy/beam ! Clean residual mean=0.000000 rms=0.000123 Jy/beam ! Combined flux in latest and established models = 0.436563 Jy keep ! Adding 316 model components to the UV plane model. ! The established model now contains 554 components and 0.436563 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0010+1724_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.84 x 1.999 at -2.175 degrees (North through East) ! Clean map min=-0.00063262 max=0.23075 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0010+1724_X_map.fits wmodel /image_prod/ug002_uva//J0010+1724_X_map.mod ! Writing 554 model components to file: /image_prod/ug002_uva//J0010+1724_X_map.mod wobs /image_prod/ug002_uva//J0010+1724_X_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0010+1724_X_uvs.fits wwins /image_prod/ug002_uva//J0010+1724_X_map.win ! wwins: Wrote 13 windows to /image_prod/ug002_uva//J0010+1724_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.230748 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000122566 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.15935 0.15935 0.3187 0.637401 1.2748 2.5496 5.09921 10.1984 20.3968 40.7937 81.5873 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.23 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1882.65 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0010+1724_X_dfm.log closed on Wed Mar 4 18:15:43 2020