! Started logfile: /image_prod/ug002_uva//J0010+1058_S_b_dfm.log on Wed Mar  4 18:13:47 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J0010+1058_S_b_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J0010+1058_S_b_uva.fits
! AN table 1: 6 integrations on 15 of 15 possible baselines.
! AN table 2: 6 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.894444 visibilities/baseline/integration-bin.
! Found source: J0010+1058
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 483 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0010+1058_S_b]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 2 telescope corrections were flagged in sub-array 1.
!  A total of 2 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 2 telescope corrections were flagged in sub-array 1.
!  A total of 2 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 2 telescope corrections were flagged in sub-array 1.
!  A total of 2 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=0.993173Jy  sigma=10.310548
! Fit after  self-cal, rms=0.939535Jy  sigma=9.758356
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.881 mas, bmaj=14.79 mas, bpa=-20.54 degrees
! Estimated noise=3.57137 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0475706 Jy
! Component: 100  -  total flux cleaned = 0.0581458 Jy
! Total flux subtracted in 100 components = 0.0581458 Jy
! Clean residual min=-0.006701 max=0.006789 Jy/beam
! Clean residual mean=0.000003 rms=0.001821 Jy/beam
! Combined flux in latest and established models = 0.0581458 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 0.0581458 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.052251Jy  sigma=0.514461
! Fit after  self-cal, rms=0.051590Jy  sigma=0.507235
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.218 mas, bmaj=13.82 mas, bpa=-21 degrees
! Estimated noise=3.17838 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0042317 Jy
! Component: 100  -  total flux cleaned = 0.00533728 Jy
! Component: 150  -  total flux cleaned = 0.00562822 Jy
! Component: 200  -  total flux cleaned = 0.00555925 Jy
! Total flux subtracted in 200 components = 0.00555925 Jy
! Clean residual min=-0.005436 max=0.005879 Jy/beam
! Clean residual mean=0.000005 rms=0.001427 Jy/beam
! Combined flux in latest and established models = 0.0637051 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 24 components and 0.0637051 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.050971Jy  sigma=0.502009
! Fit after  self-cal, rms=0.050907Jy  sigma=0.501497
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.218 x 13.82 at -21 degrees (North through East)
! Clean map  min=-0.0053451  max=0.059944 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.96     KP        0.92     LA        0.87     MK        0.89     
!   NL        0.90     OV        1.11     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.88     FD        0.77     KP        0.99     LA        1.33     
!   NL        1.18     OV        1.07     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.84     KP        1.27     LA        0.98     MK        0.85     
!   NL        1.17     OV        1.02     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.01     FD        0.96     KP        1.01     LA        0.96     
!   NL        0.97     OV        0.94     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.19     KP        0.91     LA        1.15     MK        1.32     
!   NL        0.91     OV        0.89     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.94     FD        0.96     KP        1.00     LA        0.92     
!   NL        0.89     OV        1.40     
! 
! 
! Fit before self-cal, rms=0.050907Jy  sigma=0.501497
! Fit after  self-cal, rms=0.051066Jy  sigma=0.488407
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.206 mas, bmaj=13.62 mas, bpa=-21.07 degrees
! Estimated noise=3.12801 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000609539 Jy
! Component: 100  -  total flux cleaned = 0.00076814 Jy
! Component: 150  -  total flux cleaned = 0.000721935 Jy
! Component: 200  -  total flux cleaned = 0.000679301 Jy
! Total flux subtracted in 200 components = 0.000679301 Jy
! Clean residual min=-0.004331 max=0.005244 Jy/beam
! Clean residual mean=0.000006 rms=0.001206 Jy/beam
! Combined flux in latest and established models = 0.0643844 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 39 components and 0.0643844 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.050952Jy  sigma=0.487278
! Fit after  self-cal, rms=0.051279Jy  sigma=0.486065
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.051279Jy  sigma=0.486065
! Fit after  self-cal, rms=0.051801Jy  sigma=0.485833
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.183 mas, bmaj=13.6 mas, bpa=-21.11 degrees
! Estimated noise=3.12602 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000283946 Jy
! Component: 100  -  total flux cleaned = 0.000323447 Jy
! Component: 150  -  total flux cleaned = 0.000286339 Jy
! Component: 200  -  total flux cleaned = 0.000217911 Jy
! Total flux subtracted in 200 components = 0.000217911 Jy
! Clean residual min=-0.004349 max=0.005104 Jy/beam
! Clean residual mean=0.000007 rms=0.001192 Jy/beam
! Combined flux in latest and established models = 0.0646023 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 48 components and 0.0646023 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.051732Jy  sigma=0.485338
! Fit after  self-cal, rms=0.051804Jy  sigma=0.485248
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000121009 Jy
! Component: 100  -  total flux cleaned = -0.000154507 Jy
! Component: 150  -  total flux cleaned = -0.000281303 Jy
! Component: 200  -  total flux cleaned = -0.000312189 Jy
! Total flux subtracted in 200 components = -0.000312189 Jy
! Clean residual min=-0.004450 max=0.005048 Jy/beam
! Clean residual mean=0.000007 rms=0.001201 Jy/beam
! Combined flux in latest and established models = 0.0642901 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 53 components and 0.0642901 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.051751Jy  sigma=0.484966
! Fit after  self-cal, rms=0.051762Jy  sigma=0.484930
! Inverting map 
! Added new window around map position (-86, 123.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00254046 Jy
! Component: 100  -  total flux cleaned = 0.00200404 Jy
! Component: 150  -  total flux cleaned = 0.00152485 Jy
! Component: 200  -  total flux cleaned = 0.0012017 Jy
! Total flux subtracted in 200 components = 0.0012017 Jy
! Clean residual min=-0.003932 max=0.003881 Jy/beam
! Clean residual mean=0.000005 rms=0.001019 Jy/beam
! Combined flux in latest and established models = 0.0654918 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 74 components and 0.0654918 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.051285Jy  sigma=0.480809
! Fit after  self-cal, rms=0.051138Jy  sigma=0.479513
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.051138Jy  sigma=0.479513
! Fit after  self-cal, rms=0.050417Jy  sigma=0.478937
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.124 mas, bmaj=13.68 mas, bpa=-21.09 degrees
! Estimated noise=3.08884 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000524171 Jy
! Component: 100  -  total flux cleaned = 4.0136e-05 Jy
! Component: 150  -  total flux cleaned = -0.000427344 Jy
! Component: 200  -  total flux cleaned = -0.000534972 Jy
! Total flux subtracted in 200 components = -0.000534972 Jy
! Clean residual min=-0.003738 max=0.003852 Jy/beam
! Clean residual mean=0.000003 rms=0.000981 Jy/beam
! Combined flux in latest and established models = 0.0649568 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 99 components and 0.0649569 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.050206Jy  sigma=0.477156
! Fit after  self-cal, rms=0.050168Jy  sigma=0.476942
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.7925e-05 Jy
! Component: 100  -  total flux cleaned = -0.000254141 Jy
! Component: 150  -  total flux cleaned = -0.000254008 Jy
! Component: 200  -  total flux cleaned = -0.00029841 Jy
! Total flux subtracted in 200 components = -0.00029841 Jy
! Clean residual min=-0.003654 max=0.003764 Jy/beam
! Clean residual mean=0.000004 rms=0.000954 Jy/beam
! Combined flux in latest and established models = 0.0646584 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 110 components and 0.0646584 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.050064Jy  sigma=0.476065
! Fit after  self-cal, rms=0.050053Jy  sigma=0.476008
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.050053Jy  sigma=0.476008
! Fit after  self-cal, rms=0.049891Jy  sigma=0.475811
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.491 mas, bmaj=13.37 mas, bpa=-23.54 degrees
! Estimated noise=3.46944 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000549286 Jy
! Component: 100  -  total flux cleaned = -0.00062216 Jy
! Component: 150  -  total flux cleaned = -0.000791409 Jy
! Component: 200  -  total flux cleaned = -0.000854106 Jy
! Total flux subtracted in 200 components = -0.000854106 Jy
! Clean residual min=-0.002888 max=0.003614 Jy/beam
! Clean residual mean=0.000005 rms=0.000923 Jy/beam
! Combined flux in latest and established models = 0.0638043 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 131 components and 0.0638043 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.049849Jy  sigma=0.475359
! Fit after  self-cal, rms=0.049835Jy  sigma=0.475303
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000106766 Jy
! Component: 100  -  total flux cleaned = -0.000197465 Jy
! Component: 150  -  total flux cleaned = -0.000312989 Jy
! Component: 200  -  total flux cleaned = -0.00042344 Jy
! Total flux subtracted in 200 components = -0.00042344 Jy
! Clean residual min=-0.002897 max=0.003440 Jy/beam
! Clean residual mean=0.000006 rms=0.000902 Jy/beam
! Combined flux in latest and established models = 0.0633809 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 144 components and 0.0633809 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.049813Jy  sigma=0.475022
! Fit after  self-cal, rms=0.049812Jy  sigma=0.475006
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.086 mas, bmaj=13.74 mas, bpa=-21.07 degrees
! Estimated noise=3.07571 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.086 x 13.74 at -21.07 degrees (North through East)
! Clean map  min=-0.0051774  max=0.058413 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.743 mas, bmaj=14.72 mas, bpa=-20.58 degrees
! Estimated noise=3.45775 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0463842 Jy
! Component: 100  -  total flux cleaned = 0.0583254 Jy
! Component: 150  -  total flux cleaned = 0.0653101 Jy
! Component: 200  -  total flux cleaned = 0.0686825 Jy
! Total flux subtracted in 200 components = 0.0686825 Jy
! Clean residual min=-0.004952 max=0.005036 Jy/beam
! Clean residual mean=-0.000003 rms=0.001413 Jy/beam
! Combined flux in latest and established models = 0.0686825 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 23 model components to the UV plane model.
! The established model now contains 23 components and 0.0686825 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.086 mas, bmaj=13.74 mas, bpa=-21.07 degrees
! Estimated noise=3.07571 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00219417 Jy
! Component: 100  -  total flux cleaned = -0.00262046 Jy
! Component: 150  -  total flux cleaned = -0.00251537 Jy
! Component: 200  -  total flux cleaned = -0.00306504 Jy
! Total flux subtracted in 200 components = -0.00306504 Jy
! Clean residual min=-0.004053 max=0.004547 Jy/beam
! Clean residual mean=0.000002 rms=0.001151 Jy/beam
! Combined flux in latest and established models = 0.0656175 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 45 components and 0.0656175 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.491 mas, bmaj=13.37 mas, bpa=-23.54 degrees
! Estimated noise=3.46944 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000942495 Jy
! Component: 100  -  total flux cleaned = -0.00107665 Jy
! Component: 150  -  total flux cleaned = -0.00107604 Jy
! Component: 200  -  total flux cleaned = -0.000965056 Jy
! Total flux subtracted in 200 components = -0.000965056 Jy
! Clean residual min=-0.003454 max=0.004282 Jy/beam
! Clean residual mean=0.000004 rms=0.001078 Jy/beam
! Combined flux in latest and established models = 0.0646524 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.19033e-05 Jy
! Component: 100  -  total flux cleaned = 4.66335e-05 Jy
! Component: 150  -  total flux cleaned = 4.60802e-05 Jy
! Component: 200  -  total flux cleaned = 5.08933e-06 Jy
! Total flux subtracted in 200 components = 5.08933e-06 Jy
! Clean residual min=-0.003353 max=0.004036 Jy/beam
! Clean residual mean=0.000005 rms=0.001018 Jy/beam
! Combined flux in latest and established models = 0.0646575 Jy
! Adding 40 model components to the UV plane model.
! The established model now contains 85 components and 0.0646575 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.086 mas, bmaj=13.74 mas, bpa=-21.07 degrees
! Estimated noise=3.07571 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000389327 Jy
! Component: 100  -  total flux cleaned = -0.000268279 Jy
! Component: 150  -  total flux cleaned = -0.000433506 Jy
! Component: 200  -  total flux cleaned = -0.000536834 Jy
! Total flux subtracted in 200 components = -0.000536834 Jy
! Clean residual min=-0.003811 max=0.003872 Jy/beam
! Clean residual mean=0.000004 rms=0.000999 Jy/beam
! Combined flux in latest and established models = 0.0641207 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 107 components and 0.0641207 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.049955Jy  sigma=0.477076
! Fit after  self-cal, rms=0.049959Jy  sigma=0.476559
wmodel J0010+1058_S_b_map.mod
! Writing 107 model components to file: J0010+1058_S_b_map.mod
wobs   J0010+1058_S_b_uvs.fits
! Writing UV FITS file: J0010+1058_S_b_uvs.fits
wwins  J0010+1058_S_b_map.win
! wwins: Wrote 2 windows to J0010+1058_S_b_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -7.18742e-05 Jy
! Component: 100  -  total flux cleaned = 0.000418807 Jy
! Component: 150  -  total flux cleaned = 0.000699835 Jy
! Component: 200  -  total flux cleaned = 0.00112392 Jy
! Component: 250  -  total flux cleaned = 0.00157238 Jy
! Component: 300  -  total flux cleaned = 0.0019462 Jy
! Component: 350  -  total flux cleaned = 0.0023441 Jy
! Component: 400  -  total flux cleaned = 0.00276298 Jy
! Component: 450  -  total flux cleaned = 0.00312116 Jy
! Component: 500  -  total flux cleaned = 0.00334889 Jy
! Component: 550  -  total flux cleaned = 0.00364036 Jy
! Component: 600  -  total flux cleaned = 0.00388447 Jy
! Component: 650  -  total flux cleaned = 0.00415331 Jy
! Component: 700  -  total flux cleaned = 0.00441252 Jy
! Component: 750  -  total flux cleaned = 0.00463221 Jy
! Component: 800  -  total flux cleaned = 0.00484525 Jy
! Component: 850  -  total flux cleaned = 0.00513966 Jy
! Component: 900  -  total flux cleaned = 0.00528229 Jy
! Component: 950  -  total flux cleaned = 0.00542183 Jy
! Component: 1000  -  total flux cleaned = 0.00553116 Jy
! Component: 1050  -  total flux cleaned = 0.00563777 Jy
! Component: 1100  -  total flux cleaned = 0.00574202 Jy
! Component: 1150  -  total flux cleaned = 0.00581856 Jy
! Component: 1200  -  total flux cleaned = 0.00599396 Jy
! Component: 1250  -  total flux cleaned = 0.0060679 Jy
! Component: 1300  -  total flux cleaned = 0.00618945 Jy
! Component: 1350  -  total flux cleaned = 0.00628528 Jy
! Component: 1400  -  total flux cleaned = 0.00644995 Jy
! Component: 1450  -  total flux cleaned = 0.0065657 Jy
! Component: 1500  -  total flux cleaned = 0.0066341 Jy
! Component: 1550  -  total flux cleaned = 0.00670165 Jy
! Component: 1600  -  total flux cleaned = 0.00676844 Jy
! Component: 1650  -  total flux cleaned = 0.00685605 Jy
! Component: 1700  -  total flux cleaned = 0.00689915 Jy
! Component: 1750  -  total flux cleaned = 0.00702722 Jy
! Component: 1800  -  total flux cleaned = 0.00711148 Jy
! Component: 1850  -  total flux cleaned = 0.00725725 Jy
! Component: 1900  -  total flux cleaned = 0.00736051 Jy
! Component: 1950  -  total flux cleaned = 0.00752396 Jy
! Component: 2000  -  total flux cleaned = 0.00772592 Jy
! Component: 2050  -  total flux cleaned = 0.00788589 Jy
! Component: 2100  -  total flux cleaned = 0.00802438 Jy
! Component: 2150  -  total flux cleaned = 0.00812224 Jy
! Component: 2200  -  total flux cleaned = 0.00821945 Jy
! Component: 2250  -  total flux cleaned = 0.0083738 Jy
! Component: 2300  -  total flux cleaned = 0.00850749 Jy
! Component: 2350  -  total flux cleaned = 0.00856455 Jy
! Component: 2400  -  total flux cleaned = 0.00862118 Jy
! Component: 2450  -  total flux cleaned = 0.00863996 Jy
! Component: 2500  -  total flux cleaned = 0.00864012 Jy
! Component: 2550  -  total flux cleaned = 0.00867748 Jy
! Component: 2600  -  total flux cleaned = 0.00871454 Jy
! Component: 2650  -  total flux cleaned = 0.00871452 Jy
! Component: 2700  -  total flux cleaned = 0.00875149 Jy
! Component: 2750  -  total flux cleaned = 0.00875143 Jy
! Component: 2800  -  total flux cleaned = 0.0086964 Jy
! Component: 2850  -  total flux cleaned = 0.008733 Jy
! Component: 2900  -  total flux cleaned = 0.00871476 Jy
! Component: 2950  -  total flux cleaned = 0.00871482 Jy
! Component: 3000  -  total flux cleaned = 0.00873293 Jy
! Component: 3050  -  total flux cleaned = 0.0087147 Jy
! Component: 3100  -  total flux cleaned = 0.00873285 Jy
! Component: 3150  -  total flux cleaned = 0.00867847 Jy
! Component: 3200  -  total flux cleaned = 0.00875098 Jy
! Component: 3250  -  total flux cleaned = 0.00869659 Jy
! Component: 3300  -  total flux cleaned = 0.00873283 Jy
! Component: 3350  -  total flux cleaned = 0.00867845 Jy
! Component: 3400  -  total flux cleaned = 0.00867841 Jy
! Component: 3450  -  total flux cleaned = 0.00866033 Jy
! Component: 3500  -  total flux cleaned = 0.00864224 Jy
! Component: 3550  -  total flux cleaned = 0.00862394 Jy
! Component: 3600  -  total flux cleaned = 0.0086239 Jy
! Component: 3650  -  total flux cleaned = 0.0085872 Jy
! Component: 3700  -  total flux cleaned = 0.00858717 Jy
! Component: 3750  -  total flux cleaned = 0.00856867 Jy
! Component: 3800  -  total flux cleaned = 0.00855017 Jy
! Component: 3850  -  total flux cleaned = 0.00855015 Jy
! Component: 3900  -  total flux cleaned = 0.00853151 Jy
! Component: 3950  -  total flux cleaned = 0.00851282 Jy
! Component: 4000  -  total flux cleaned = 0.00851279 Jy
! Component: 4050  -  total flux cleaned = 0.00851285 Jy
! Total flux subtracted in 4096 components = 0.00847504 Jy
! Clean residual min=-0.001154 max=0.001182 Jy/beam
! Clean residual mean=0.000002 rms=0.000325 Jy/beam
! Combined flux in latest and established models = 0.0725957 Jy
keep
! Adding 230 model components to the UV plane model.
! The established model now contains 337 components and 0.0725957 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J0010+1058_S_b_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.086 x 13.74 at -21.07 degrees (North through East)
! Clean map  min=-0.004525  max=0.057061 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J0010+1058_S_b_map.fits
wmodel /image_prod/ug002_uva//J0010+1058_S_b_map.mod
! Writing 337 model components to file: /image_prod/ug002_uva//J0010+1058_S_b_map.mod
wobs   /image_prod/ug002_uva//J0010+1058_S_b_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J0010+1058_S_b_uvs.fits
wwins  /image_prod/ug002_uva//J0010+1058_S_b_map.win
! wwins: Wrote 3 windows to /image_prod/ug002_uva//J0010+1058_S_b_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0570608 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000307964 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.61913 1.61913 3.23827 6.47653 12.9531 25.9061 51.8123
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0009 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.057 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  185.284 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J0010+1058_S_b_dfm.log closed on Wed Mar  4 18:13:51 2020