! Started logfile: /image_prod/ug002_uva//J0004-1148_S_dfm.log on Wed Mar  4 18:09:22 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J0004-1148_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J0004-1148_S_uva.fits
! AN table 1: 40 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.766667 visibilities/baseline/integration-bin.
! Found source: J0004-1148
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 3312 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0004-1148_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.162041Jy  sigma=6.762672
! Fit after  self-cal, rms=0.441217Jy  sigma=2.634955
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.537 mas, bmaj=15.17 mas, bpa=-13.34 degrees
! Estimated noise=3.07274 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.439856 Jy
! Component: 100  -  total flux cleaned = 0.54501 Jy
! Total flux subtracted in 100 components = 0.54501 Jy
! Clean residual min=-0.021436 max=0.038901 Jy/beam
! Clean residual mean=-0.000206 rms=0.007452 Jy/beam
! Combined flux in latest and established models = 0.54501 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.54501 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.149490Jy  sigma=0.848828
! Fit after  self-cal, rms=0.149410Jy  sigma=0.848670
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.491 mas, bmaj=16.58 mas, bpa=-13.39 degrees
! Estimated noise=2.20848 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0432762 Jy
! Component: 100  -  total flux cleaned = 0.0551077 Jy
! Component: 150  -  total flux cleaned = 0.0566687 Jy
! Component: 200  -  total flux cleaned = 0.0572561 Jy
! Total flux subtracted in 200 components = 0.0572561 Jy
! Clean residual min=-0.014206 max=0.027656 Jy/beam
! Clean residual mean=-0.000141 rms=0.006069 Jy/beam
! Combined flux in latest and established models = 0.602266 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 29 components and 0.602266 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.135980Jy  sigma=0.799475
! Fit after  self-cal, rms=0.135833Jy  sigma=0.799126
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.491 x 16.58 at -13.39 degrees (North through East)
! Clean map  min=-0.013954  max=0.57276 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.96     HN        1.01     KP        0.95     
!   LA        2.48     MK        1.02     NL        0.98     OV        0.97     
!   PT        0.95     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.95     HN        1.02     KP        0.95     
!   LA        0.97     MK        1.02     NL        1.08     OV        1.01     
!   PT        0.96     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.96     HN        1.03     KP        0.96     
!   LA        0.97     MK        1.02     NL        1.00     OV        0.99     
!   PT        0.95     
! 
! 
! Fit before self-cal, rms=0.135833Jy  sigma=0.799126
! Fit after  self-cal, rms=0.235977Jy  sigma=0.517607
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.506 mas, bmaj=16.37 mas, bpa=-13.28 degrees
! Estimated noise=2.21601 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00784329 Jy
! Component: 100  -  total flux cleaned = 0.00902572 Jy
! Component: 150  -  total flux cleaned = 0.00956032 Jy
! Component: 200  -  total flux cleaned = 0.0101265 Jy
! Total flux subtracted in 200 components = 0.0101265 Jy
! Clean residual min=-0.014196 max=0.012540 Jy/beam
! Clean residual mean=-0.000017 rms=0.003028 Jy/beam
! Combined flux in latest and established models = 0.612393 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 37 components and 0.612393 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.235153Jy  sigma=0.515941
! Fit after  self-cal, rms=0.235341Jy  sigma=0.515166
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.235341Jy  sigma=0.515166
! Fit after  self-cal, rms=0.113058Jy  sigma=0.436897
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.496 mas, bmaj=16.33 mas, bpa=-13.29 degrees
! Estimated noise=2.21436 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00309089 Jy
! Component: 100  -  total flux cleaned = 0.00328149 Jy
! Component: 150  -  total flux cleaned = 0.00328422 Jy
! Component: 200  -  total flux cleaned = 0.00328408 Jy
! Total flux subtracted in 200 components = 0.00328408 Jy
! Clean residual min=-0.005447 max=0.011144 Jy/beam
! Clean residual mean=-0.000004 rms=0.001711 Jy/beam
! Combined flux in latest and established models = 0.615677 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 47 components and 0.615677 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.112878Jy  sigma=0.435472
! Fit after  self-cal, rms=0.112763Jy  sigma=0.435188
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (75.5, -84).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00892183 Jy
! Component: 100  -  total flux cleaned = 0.00990191 Jy
! Component: 150  -  total flux cleaned = 0.00950668 Jy
! Component: 200  -  total flux cleaned = 0.00908382 Jy
! Total flux subtracted in 200 components = 0.00908382 Jy
! Clean residual min=-0.004798 max=0.004941 Jy/beam
! Clean residual mean=0.000002 rms=0.001270 Jy/beam
! Combined flux in latest and established models = 0.624761 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 81 components and 0.624761 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.112078Jy  sigma=0.429462
! Fit after  self-cal, rms=0.112075Jy  sigma=0.429101
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.112075Jy  sigma=0.429101
! Fit after  self-cal, rms=0.112228Jy  sigma=0.428048
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.486 mas, bmaj=16.31 mas, bpa=-13.3 degrees
! Estimated noise=2.21368 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00382785 Jy
! Component: 100  -  total flux cleaned = 0.00450156 Jy
! Component: 150  -  total flux cleaned = 0.00456781 Jy
! Component: 200  -  total flux cleaned = 0.00475902 Jy
! Total flux subtracted in 200 components = 0.00475902 Jy
! Clean residual min=-0.003964 max=0.004490 Jy/beam
! Clean residual mean=-0.000005 rms=0.001050 Jy/beam
! Combined flux in latest and established models = 0.62952 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 103 components and 0.62952 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.112066Jy  sigma=0.426739
! Fit after  self-cal, rms=0.112069Jy  sigma=0.426660
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-98, 75.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00200679 Jy
! Component: 100  -  total flux cleaned = 0.00163441 Jy
! Component: 150  -  total flux cleaned = 0.0014834 Jy
! Component: 200  -  total flux cleaned = 0.00134994 Jy
! Total flux subtracted in 200 components = 0.00134994 Jy
! Clean residual min=-0.003761 max=0.003567 Jy/beam
! Clean residual mean=-0.000007 rms=0.000917 Jy/beam
! Combined flux in latest and established models = 0.63087 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 126 components and 0.63087 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.111818Jy  sigma=0.425304
! Fit after  self-cal, rms=0.111814Jy  sigma=0.425266
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.111814Jy  sigma=0.425266
! Fit after  self-cal, rms=0.111928Jy  sigma=0.425030
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.376 mas, bmaj=17.88 mas, bpa=-7.815 degrees
! Estimated noise=2.42807 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000760123 Jy
! Component: 100  -  total flux cleaned = 0.000449157 Jy
! Component: 150  -  total flux cleaned = 0.000404 Jy
! Component: 200  -  total flux cleaned = 0.000446397 Jy
! Total flux subtracted in 200 components = 0.000446397 Jy
! Clean residual min=-0.002953 max=0.003423 Jy/beam
! Clean residual mean=-0.000004 rms=0.000922 Jy/beam
! Combined flux in latest and established models = 0.631316 Jy
selfcal
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 155 components and 0.631316 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.111884Jy  sigma=0.424629
! Fit after  self-cal, rms=0.111882Jy  sigma=0.424601
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000500192 Jy
! Component: 100  -  total flux cleaned = 0.00042905 Jy
! Component: 150  -  total flux cleaned = 0.000398176 Jy
! Component: 200  -  total flux cleaned = 0.000336156 Jy
! Total flux subtracted in 200 components = 0.000336156 Jy
! Clean residual min=-0.002791 max=0.003256 Jy/beam
! Clean residual mean=-0.000003 rms=0.000902 Jy/beam
! Combined flux in latest and established models = 0.631652 Jy
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 181 components and 0.631652 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.111858Jy  sigma=0.424516
! Fit after  self-cal, rms=0.111856Jy  sigma=0.424505
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.484 mas, bmaj=16.31 mas, bpa=-13.29 degrees
! Estimated noise=2.21285 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.484 x 16.31 at -13.29 degrees (North through East)
! Clean map  min=-0.0031101  max=0.57225 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.111856Jy  sigma=0.424505
! Fit after  self-cal, rms=0.104759Jy  sigma=0.386054
! Inverting map and beam 
! Estimated beam: bmin=4.483 mas, bmaj=16.31 mas, bpa=-13.3 degrees
! Estimated noise=2.2129 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000333262 Jy
! Component: 100  -  total flux cleaned = 0.000386108 Jy
! Component: 150  -  total flux cleaned = 0.000488269 Jy
! Component: 200  -  total flux cleaned = 0.000676984 Jy
! Total flux subtracted in 200 components = 0.000676984 Jy
! Clean residual min=-0.003087 max=0.003180 Jy/beam
! Clean residual mean=-0.000003 rms=0.000765 Jy/beam
! Combined flux in latest and established models = 0.632329 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 200 components and 0.632329 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.104686Jy  sigma=0.385671
! Fit after  self-cal, rms=0.104689Jy  sigma=0.385660
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00012903 Jy
! Component: 100  -  total flux cleaned = 0.000294152 Jy
! Component: 150  -  total flux cleaned = 0.000407889 Jy
! Component: 200  -  total flux cleaned = 0.000301861 Jy
! Total flux subtracted in 200 components = 0.000301861 Jy
! Clean residual min=-0.002963 max=0.003109 Jy/beam
! Clean residual mean=-0.000002 rms=0.000751 Jy/beam
! Combined flux in latest and established models = 0.632631 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 210 components and 0.632631 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.104647Jy  sigma=0.385481
! Fit after  self-cal, rms=0.104648Jy  sigma=0.385476
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.104648Jy  sigma=0.385476
! Fit after  self-cal, rms=0.104635Jy  sigma=0.385433
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.538 mas, bmaj=14.96 mas, bpa=-13.3 degrees
! Estimated noise=3.07118 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.439569 Jy
! Component: 100  -  total flux cleaned = 0.545895 Jy
! Component: 150  -  total flux cleaned = 0.58489 Jy
! Component: 200  -  total flux cleaned = 0.603364 Jy
! Total flux subtracted in 200 components = 0.603364 Jy
! Clean residual min=-0.007715 max=0.010493 Jy/beam
! Clean residual mean=-0.000046 rms=0.002230 Jy/beam
! Combined flux in latest and established models = 0.603364 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 26 model components to the UV plane model.
! The established model now contains 26 components and 0.603364 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.48 mas, bmaj=16.31 mas, bpa=-13.3 degrees
! Estimated noise=2.21253 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (8.5, 2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0149798 Jy
! Component: 100  -  total flux cleaned = 0.0235442 Jy
! Component: 150  -  total flux cleaned = 0.029147 Jy
! Component: 200  -  total flux cleaned = 0.0313221 Jy
! Total flux subtracted in 200 components = 0.0313221 Jy
! Clean residual min=-0.004077 max=0.003719 Jy/beam
! Clean residual mean=-0.000003 rms=0.001105 Jy/beam
! Combined flux in latest and established models = 0.634686 Jy
! Adding 48 model components to the UV plane model.
! The established model now contains 71 components and 0.634686 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.368 mas, bmaj=17.88 mas, bpa=-7.82 degrees
! Estimated noise=2.42922 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00215969 Jy
! Component: 100  -  total flux cleaned = 0.00242566 Jy
! Component: 150  -  total flux cleaned = 0.00210937 Jy
! Component: 200  -  total flux cleaned = 0.0020107 Jy
! Total flux subtracted in 200 components = 0.0020107 Jy
! Clean residual min=-0.003048 max=0.003408 Jy/beam
! Clean residual mean=-0.000001 rms=0.000984 Jy/beam
! Combined flux in latest and established models = 0.636697 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00025149 Jy
! Component: 100  -  total flux cleaned = -0.00047349 Jy
! Component: 150  -  total flux cleaned = -0.000608921 Jy
! Component: 200  -  total flux cleaned = -0.000795492 Jy
! Total flux subtracted in 200 components = -0.000795492 Jy
! Clean residual min=-0.002848 max=0.003239 Jy/beam
! Clean residual mean=-0.000000 rms=0.000901 Jy/beam
! Combined flux in latest and established models = 0.635901 Jy
! Adding 82 model components to the UV plane model.
! The established model now contains 146 components and 0.635901 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.48 mas, bmaj=16.31 mas, bpa=-13.3 degrees
! Estimated noise=2.21253 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000902918 Jy
! Component: 100  -  total flux cleaned = 0.00132934 Jy
! Component: 150  -  total flux cleaned = 0.00132746 Jy
! Component: 200  -  total flux cleaned = 0.00146528 Jy
! Total flux subtracted in 200 components = 0.00146528 Jy
! Clean residual min=-0.003203 max=0.003009 Jy/beam
! Clean residual mean=0.000001 rms=0.000809 Jy/beam
! Combined flux in latest and established models = 0.637366 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 171 components and 0.637366 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.104782Jy  sigma=0.386498
! Fit after  self-cal, rms=0.104755Jy  sigma=0.386388
wmodel J0004-1148_S_map.mod
! Writing 171 model components to file: J0004-1148_S_map.mod
wobs   J0004-1148_S_uvs.fits
! Writing UV FITS file: J0004-1148_S_uvs.fits
wwins  J0004-1148_S_map.win
! wwins: Wrote 4 windows to J0004-1148_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000381118 Jy
! Component: 100  -  total flux cleaned = 0.000538925 Jy
! Component: 150  -  total flux cleaned = 0.00053851 Jy
! Component: 200  -  total flux cleaned = 0.000406039 Jy
! Component: 250  -  total flux cleaned = 0.000319867 Jy
! Component: 300  -  total flux cleaned = 0.000279064 Jy
! Component: 350  -  total flux cleaned = 0.000318018 Jy
! Component: 400  -  total flux cleaned = 0.000430564 Jy
! Component: 450  -  total flux cleaned = 0.000539307 Jy
! Component: 500  -  total flux cleaned = 0.000609318 Jy
! Component: 550  -  total flux cleaned = 0.000507699 Jy
! Component: 600  -  total flux cleaned = 0.000408954 Jy
! Component: 650  -  total flux cleaned = 0.000312307 Jy
! Component: 700  -  total flux cleaned = 0.000218043 Jy
! Component: 750  -  total flux cleaned = 0.000156618 Jy
! Component: 800  -  total flux cleaned = 0.000126436 Jy
! Component: 850  -  total flux cleaned = 6.68985e-05 Jy
! Component: 900  -  total flux cleaned = 6.63764e-05 Jy
! Component: 950  -  total flux cleaned = 9.36182e-05 Jy
! Component: 1000  -  total flux cleaned = 1.00804e-05 Jy
! Component: 1050  -  total flux cleaned = -7.11224e-05 Jy
! Component: 1100  -  total flux cleaned = -9.82067e-05 Jy
! Component: 1150  -  total flux cleaned = -0.000176677 Jy
! Component: 1200  -  total flux cleaned = -0.000227984 Jy
! Component: 1250  -  total flux cleaned = -0.000278525 Jy
! Component: 1300  -  total flux cleaned = -0.000303358 Jy
! Component: 1350  -  total flux cleaned = -0.000400561 Jy
! Component: 1400  -  total flux cleaned = -0.000424013 Jy
! Component: 1450  -  total flux cleaned = -0.000447112 Jy
! Component: 1500  -  total flux cleaned = -0.000493699 Jy
! Component: 1550  -  total flux cleaned = -0.000539792 Jy
! Component: 1600  -  total flux cleaned = -0.000630484 Jy
! Component: 1650  -  total flux cleaned = -0.00076428 Jy
! Component: 1700  -  total flux cleaned = -0.000807934 Jy
! Component: 1750  -  total flux cleaned = -0.000851421 Jy
! Component: 1800  -  total flux cleaned = -0.000936516 Jy
! Component: 1850  -  total flux cleaned = -0.000936552 Jy
! Component: 1900  -  total flux cleaned = -0.000957461 Jy
! Component: 1950  -  total flux cleaned = -0.000978243 Jy
! Component: 2000  -  total flux cleaned = -0.00105936 Jy
! Component: 2050  -  total flux cleaned = -0.00107969 Jy
! Component: 2100  -  total flux cleaned = -0.00115914 Jy
! Component: 2150  -  total flux cleaned = -0.0012181 Jy
! Component: 2200  -  total flux cleaned = -0.00129558 Jy
! Component: 2250  -  total flux cleaned = -0.00125734 Jy
! Component: 2300  -  total flux cleaned = -0.00131444 Jy
! Component: 2350  -  total flux cleaned = -0.0013146 Jy
! Component: 2400  -  total flux cleaned = -0.00138868 Jy
! Component: 2450  -  total flux cleaned = -0.00142502 Jy
! Component: 2500  -  total flux cleaned = -0.0014069 Jy
! Component: 2550  -  total flux cleaned = -0.00147884 Jy
! Component: 2600  -  total flux cleaned = -0.00142553 Jy
! Component: 2650  -  total flux cleaned = -0.00151401 Jy
! Component: 2700  -  total flux cleaned = -0.00153149 Jy
! Component: 2750  -  total flux cleaned = -0.0016355 Jy
! Component: 2800  -  total flux cleaned = -0.00165276 Jy
! Component: 2850  -  total flux cleaned = -0.00170391 Jy
! Component: 2900  -  total flux cleaned = -0.00180515 Jy
! Component: 2950  -  total flux cleaned = -0.00178811 Jy
! Component: 3000  -  total flux cleaned = -0.00185462 Jy
! Component: 3050  -  total flux cleaned = -0.00190414 Jy
! Component: 3100  -  total flux cleaned = -0.00200214 Jy
! Component: 3150  -  total flux cleaned = -0.00205068 Jy
! Component: 3200  -  total flux cleaned = -0.0020989 Jy
! Component: 3250  -  total flux cleaned = -0.00213079 Jy
! Component: 3300  -  total flux cleaned = -0.00219415 Jy
! Component: 3350  -  total flux cleaned = -0.00227267 Jy
! Component: 3400  -  total flux cleaned = -0.00228821 Jy
! Component: 3450  -  total flux cleaned = -0.00236576 Jy
! Component: 3500  -  total flux cleaned = -0.0023963 Jy
! Component: 3550  -  total flux cleaned = -0.00244199 Jy
! Component: 3600  -  total flux cleaned = -0.00247218 Jy
! Component: 3650  -  total flux cleaned = -0.00248718 Jy
! Component: 3700  -  total flux cleaned = -0.00253187 Jy
! Component: 3750  -  total flux cleaned = -0.00254679 Jy
! Component: 3800  -  total flux cleaned = -0.00265003 Jy
! Component: 3850  -  total flux cleaned = -0.00264983 Jy
! Component: 3900  -  total flux cleaned = -0.00270806 Jy
! Component: 3950  -  total flux cleaned = -0.00278036 Jy
! Component: 4000  -  total flux cleaned = -0.00280913 Jy
! Component: 4050  -  total flux cleaned = -0.00286632 Jy
! Total flux subtracted in 4096 components = -0.00296572 Jy
! Clean residual min=-0.000848 max=0.000810 Jy/beam
! Clean residual mean=-0.000001 rms=0.000276 Jy/beam
! Combined flux in latest and established models = 0.634401 Jy
keep
! Adding 285 model components to the UV plane model.
! The established model now contains 456 components and 0.6344 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J0004-1148_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.48 x 16.31 at -13.3 degrees (North through East)
! Clean map  min=-0.0021277  max=0.57024 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J0004-1148_S_map.fits
wmodel /image_prod/ug002_uva//J0004-1148_S_map.mod
! Writing 456 model components to file: /image_prod/ug002_uva//J0004-1148_S_map.mod
wobs   /image_prod/ug002_uva//J0004-1148_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J0004-1148_S_uvs.fits
wwins  /image_prod/ug002_uva//J0004-1148_S_map.win
! wwins: Wrote 5 windows to /image_prod/ug002_uva//J0004-1148_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.570238 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000273513 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.143894 0.143894 0.287788 0.575576 1.15115 2.30231 4.60461 9.20922 18.4184 36.8369 73.6738
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.57 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  2084.87 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J0004-1148_S_dfm.log closed on Wed Mar  4 18:09:26 2020