! Started logfile: /image_prod/ug002_uva//J0003-1547_S_dfm.log on Wed Mar 4 18:08:27 2020 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /image_prod/ug002_uva//J0003-1547_S_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0003-1547_S_uva.fits ! AN table 1: 45 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.991358 visibilities/baseline/integration-bin. ! Found source: J0003-1547 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 40 lines of history. ! ! Reading 4818 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0003-1547_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=1.004232Jy sigma=7.812115 ! Fit after self-cal, rms=0.934075Jy sigma=7.249879 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.865 mas, bmaj=14.07 mas, bpa=-17.72 degrees ! Estimated noise=2.19462 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0541484 Jy ! Component: 100 - total flux cleaned = 0.0663871 Jy ! Total flux subtracted in 100 components = 0.0663871 Jy ! Clean residual min=-0.004975 max=0.005298 Jy/beam ! Clean residual mean=0.000005 rms=0.001357 Jy/beam ! Combined flux in latest and established models = 0.0663871 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.0663871 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.072086Jy sigma=0.519693 ! Fit after self-cal, rms=0.071240Jy sigma=0.513893 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.61 mas, bmaj=14.85 mas, bpa=-17.52 degrees ! Estimated noise=1.3684 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00446581 Jy ! Component: 100 - total flux cleaned = 0.00615422 Jy ! Component: 150 - total flux cleaned = 0.00615203 Jy ! Component: 200 - total flux cleaned = 0.00620619 Jy ! Total flux subtracted in 200 components = 0.00620619 Jy ! Clean residual min=-0.003384 max=0.003381 Jy/beam ! Clean residual mean=-0.000001 rms=0.000799 Jy/beam ! Combined flux in latest and established models = 0.0725933 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 22 components and 0.0725933 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.070989Jy sigma=0.511292 ! Fit after self-cal, rms=0.070999Jy sigma=0.511242 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.61 x 14.85 at -17.52 degrees (North through East) ! Clean map min=-0.003215 max=0.070082 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.00 HN 1.09 KP 1.00 ! LA 0.96 MK 0.97 NL 1.03 OV 0.94 ! PT 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 0.92 HN 1.04 KP 0.98 ! LA 1.00 MK 0.94 NL 1.02 OV 0.97 ! PT 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.93 HN 0.96 KP 1.00 ! LA 1.09 MK 0.97 NL 0.97 OV 1.01 ! PT 0.99 ! ! ! Fit before self-cal, rms=0.070999Jy sigma=0.511242 ! Fit after self-cal, rms=0.071144Jy sigma=0.509974 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.591 mas, bmaj=14.92 mas, bpa=-17.67 degrees ! Estimated noise=1.34835 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000865601 Jy ! Component: 100 - total flux cleaned = -0.000951943 Jy ! Component: 150 - total flux cleaned = -0.00106633 Jy ! Component: 200 - total flux cleaned = -0.00113564 Jy ! Total flux subtracted in 200 components = -0.00113564 Jy ! Clean residual min=-0.002982 max=0.002709 Jy/beam ! Clean residual mean=-0.000001 rms=0.000715 Jy/beam ! Combined flux in latest and established models = 0.0714577 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 30 components and 0.0714577 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.071089Jy sigma=0.509616 ! Fit after self-cal, rms=0.071147Jy sigma=0.509514 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.071147Jy sigma=0.509514 ! Fit after self-cal, rms=0.073901Jy sigma=0.508031 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.588 mas, bmaj=15.05 mas, bpa=-17.81 degrees ! Estimated noise=1.3545 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000299995 Jy ! Component: 100 - total flux cleaned = -0.000273179 Jy ! Component: 150 - total flux cleaned = -0.000273893 Jy ! Component: 200 - total flux cleaned = -0.000249649 Jy ! Total flux subtracted in 200 components = -0.000249649 Jy ! Clean residual min=-0.002612 max=0.002466 Jy/beam ! Clean residual mean=0.000001 rms=0.000626 Jy/beam ! Combined flux in latest and established models = 0.071208 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 46 components and 0.071208 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.073887Jy sigma=0.507821 ! Fit after self-cal, rms=0.073963Jy sigma=0.507714 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.5406e-05 Jy ! Component: 100 - total flux cleaned = 3.60834e-05 Jy ! Component: 150 - total flux cleaned = 3.58985e-05 Jy ! Component: 200 - total flux cleaned = 3.63248e-05 Jy ! Total flux subtracted in 200 components = 3.63248e-05 Jy ! Clean residual min=-0.002553 max=0.002428 Jy/beam ! Clean residual mean=0.000000 rms=0.000620 Jy/beam ! Combined flux in latest and established models = 0.0712443 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 52 components and 0.0712443 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.073954Jy sigma=0.507588 ! Fit after self-cal, rms=0.073952Jy sigma=0.507583 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.073952Jy sigma=0.507583 ! Fit after self-cal, rms=0.074379Jy sigma=0.507556 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.585 mas, bmaj=15.11 mas, bpa=-17.77 degrees ! Estimated noise=1.35388 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000203501 Jy ! Component: 100 - total flux cleaned = -0.000179668 Jy ! Component: 150 - total flux cleaned = -0.000158735 Jy ! Component: 200 - total flux cleaned = -0.000159186 Jy ! Total flux subtracted in 200 components = -0.000159186 Jy ! Clean residual min=-0.002573 max=0.002395 Jy/beam ! Clean residual mean=0.000000 rms=0.000611 Jy/beam ! Combined flux in latest and established models = 0.0710851 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 57 components and 0.0710851 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.074368Jy sigma=0.507443 ! Fit after self-cal, rms=0.074375Jy sigma=0.507436 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.83058e-06 Jy ! Component: 100 - total flux cleaned = 2.68493e-06 Jy ! Component: 150 - total flux cleaned = 2.74574e-06 Jy ! Component: 200 - total flux cleaned = 2.70315e-06 Jy ! Total flux subtracted in 200 components = 2.70315e-06 Jy ! Clean residual min=-0.002507 max=0.002389 Jy/beam ! Clean residual mean=0.000000 rms=0.000608 Jy/beam ! Combined flux in latest and established models = 0.0710878 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 58 components and 0.0710878 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.074368Jy sigma=0.507358 ! Fit after self-cal, rms=0.074365Jy sigma=0.507356 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.074365Jy sigma=0.507356 ! Fit after self-cal, rms=0.074624Jy sigma=0.507343 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.111 mas, bmaj=19.06 mas, bpa=-7.322 degrees ! Estimated noise=1.59098 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000143389 Jy ! Component: 100 - total flux cleaned = -0.00017761 Jy ! Component: 150 - total flux cleaned = -0.000177058 Jy ! Component: 200 - total flux cleaned = -0.000176776 Jy ! Total flux subtracted in 200 components = -0.000176776 Jy ! Clean residual min=-0.002683 max=0.002711 Jy/beam ! Clean residual mean=-0.000001 rms=0.000757 Jy/beam ! Combined flux in latest and established models = 0.070911 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 68 components and 0.070911 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.074621Jy sigma=0.507296 ! Fit after self-cal, rms=0.074623Jy sigma=0.507286 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.01428e-05 Jy ! Component: 100 - total flux cleaned = -5.8394e-05 Jy ! Component: 150 - total flux cleaned = -5.7924e-05 Jy ! Component: 200 - total flux cleaned = -6.64598e-05 Jy ! Total flux subtracted in 200 components = -6.64598e-05 Jy ! Clean residual min=-0.002661 max=0.002723 Jy/beam ! Clean residual mean=-0.000001 rms=0.000756 Jy/beam ! Combined flux in latest and established models = 0.0708446 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 72 components and 0.0708446 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.074621Jy sigma=0.507269 ! Fit after self-cal, rms=0.074618Jy sigma=0.507266 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.585 mas, bmaj=15.17 mas, bpa=-17.71 degrees ! Estimated noise=1.35351 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.585 x 15.17 at -17.71 degrees (North through East) ! Clean map min=-0.0024399 max=0.069025 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.848 mas, bmaj=14.36 mas, bpa=-17.87 degrees ! Estimated noise=2.18493 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0543257 Jy ! Component: 100 - total flux cleaned = 0.066521 Jy ! Component: 150 - total flux cleaned = 0.0712828 Jy ! Component: 200 - total flux cleaned = 0.0723965 Jy ! Total flux subtracted in 200 components = 0.0723965 Jy ! Clean residual min=-0.004274 max=0.004518 Jy/beam ! Clean residual mean=0.000002 rms=0.001314 Jy/beam ! Combined flux in latest and established models = 0.0723965 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.0723965 Jy ! Inverting map and beam ! Estimated beam: bmin=3.585 mas, bmaj=15.17 mas, bpa=-17.71 degrees ! Estimated noise=1.35351 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000715462 Jy ! Component: 100 - total flux cleaned = -0.000929279 Jy ! Component: 150 - total flux cleaned = -0.0010647 Jy ! Component: 200 - total flux cleaned = -0.00110367 Jy ! Total flux subtracted in 200 components = -0.00110367 Jy ! Clean residual min=-0.002768 max=0.002340 Jy/beam ! Clean residual mean=-0.000000 rms=0.000636 Jy/beam ! Combined flux in latest and established models = 0.0712929 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 31 components and 0.0712929 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.111 mas, bmaj=19.06 mas, bpa=-7.322 degrees ! Estimated noise=1.59098 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.1076e-05 Jy ! Component: 100 - total flux cleaned = -0.000142476 Jy ! Component: 150 - total flux cleaned = -0.000186193 Jy ! Component: 200 - total flux cleaned = -0.000185847 Jy ! Total flux subtracted in 200 components = -0.000185847 Jy ! Clean residual min=-0.002798 max=0.002758 Jy/beam ! Clean residual mean=-0.000001 rms=0.000767 Jy/beam ! Combined flux in latest and established models = 0.071107 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.22454e-08 Jy ! Component: 100 - total flux cleaned = -1.28211e-05 Jy ! Component: 150 - total flux cleaned = -1.26601e-05 Jy ! Component: 200 - total flux cleaned = -2.42934e-05 Jy ! Total flux subtracted in 200 components = -2.42934e-05 Jy ! Clean residual min=-0.002755 max=0.002749 Jy/beam ! Clean residual mean=-0.000001 rms=0.000764 Jy/beam ! Combined flux in latest and established models = 0.0710827 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 43 components and 0.0710827 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.585 mas, bmaj=15.17 mas, bpa=-17.71 degrees ! Estimated noise=1.35351 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000135365 Jy ! Component: 100 - total flux cleaned = 0.000107744 Jy ! Component: 150 - total flux cleaned = 8.17064e-05 Jy ! Component: 200 - total flux cleaned = 8.17786e-05 Jy ! Total flux subtracted in 200 components = 8.17786e-05 Jy ! Clean residual min=-0.002592 max=0.002300 Jy/beam ! Clean residual mean=0.000000 rms=0.000617 Jy/beam ! Combined flux in latest and established models = 0.0711645 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 50 components and 0.0711645 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.074632Jy sigma=0.507451 ! Fit after self-cal, rms=0.074618Jy sigma=0.507435 wmodel J0003-1547_S_map.mod ! Writing 50 model components to file: J0003-1547_S_map.mod wobs J0003-1547_S_uvs.fits ! Writing UV FITS file: J0003-1547_S_uvs.fits wwins J0003-1547_S_map.win ! wwins: Wrote 1 windows to J0003-1547_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000519587 Jy ! Component: 100 - total flux cleaned = -0.000523069 Jy ! Component: 150 - total flux cleaned = -0.000335499 Jy ! Component: 200 - total flux cleaned = -0.000191623 Jy ! Component: 250 - total flux cleaned = -2.07439e-05 Jy ! Component: 300 - total flux cleaned = 0.000108792 Jy ! Component: 350 - total flux cleaned = 0.000265286 Jy ! Component: 400 - total flux cleaned = 0.000295039 Jy ! Component: 450 - total flux cleaned = 0.000265614 Jy ! Component: 500 - total flux cleaned = 0.000264895 Jy ! Component: 550 - total flux cleaned = 0.000264979 Jy ! Component: 600 - total flux cleaned = 0.000317807 Jy ! Component: 650 - total flux cleaned = 0.000395506 Jy ! Component: 700 - total flux cleaned = 0.000521622 Jy ! Component: 750 - total flux cleaned = 0.000571299 Jy ! Component: 800 - total flux cleaned = 0.00057213 Jy ! Component: 850 - total flux cleaned = 0.000619862 Jy ! Component: 900 - total flux cleaned = 0.00062028 Jy ! Component: 950 - total flux cleaned = 0.00075603 Jy ! Component: 1000 - total flux cleaned = 0.000800117 Jy ! Component: 1050 - total flux cleaned = 0.000821829 Jy ! Component: 1100 - total flux cleaned = 0.000886059 Jy ! Component: 1150 - total flux cleaned = 0.000991086 Jy ! Component: 1200 - total flux cleaned = 0.00103246 Jy ! Component: 1250 - total flux cleaned = 0.00111388 Jy ! Component: 1300 - total flux cleaned = 0.00123401 Jy ! Component: 1350 - total flux cleaned = 0.00125406 Jy ! Component: 1400 - total flux cleaned = 0.00140934 Jy ! Component: 1450 - total flux cleaned = 0.00144742 Jy ! Component: 1500 - total flux cleaned = 0.00161687 Jy ! Component: 1550 - total flux cleaned = 0.00167266 Jy ! Component: 1600 - total flux cleaned = 0.00176427 Jy ! Component: 1650 - total flux cleaned = 0.00187247 Jy ! Component: 1700 - total flux cleaned = 0.00194356 Jy ! Component: 1750 - total flux cleaned = 0.0019261 Jy ! Component: 1800 - total flux cleaned = 0.00197835 Jy ! Component: 1850 - total flux cleaned = 0.00196144 Jy ! Component: 1900 - total flux cleaned = 0.00201212 Jy ! Component: 1950 - total flux cleaned = 0.00204538 Jy ! Component: 2000 - total flux cleaned = 0.00209472 Jy ! Component: 2050 - total flux cleaned = 0.00212717 Jy ! Component: 2100 - total flux cleaned = 0.0021435 Jy ! Component: 2150 - total flux cleaned = 0.00222295 Jy ! Component: 2200 - total flux cleaned = 0.00225426 Jy ! Component: 2250 - total flux cleaned = 0.00225429 Jy ! Component: 2300 - total flux cleaned = 0.00223921 Jy ! Component: 2350 - total flux cleaned = 0.00229979 Jy ! Component: 2400 - total flux cleaned = 0.00229968 Jy ! Component: 2450 - total flux cleaned = 0.00228501 Jy ! Component: 2500 - total flux cleaned = 0.00227027 Jy ! Component: 2550 - total flux cleaned = 0.00225559 Jy ! Component: 2600 - total flux cleaned = 0.00224116 Jy ! Component: 2650 - total flux cleaned = 0.00215593 Jy ! Component: 2700 - total flux cleaned = 0.00211403 Jy ! Component: 2750 - total flux cleaned = 0.00208648 Jy ! Component: 2800 - total flux cleaned = 0.00205915 Jy ! Component: 2850 - total flux cleaned = 0.0020319 Jy ! Component: 2900 - total flux cleaned = 0.00199143 Jy ! Component: 2950 - total flux cleaned = 0.00192457 Jy ! Component: 3000 - total flux cleaned = 0.00187168 Jy ! Component: 3050 - total flux cleaned = 0.00179296 Jy ! Component: 3100 - total flux cleaned = 0.00178016 Jy ! Component: 3150 - total flux cleaned = 0.00175417 Jy ! Component: 3200 - total flux cleaned = 0.00169019 Jy ! Component: 3250 - total flux cleaned = 0.00166477 Jy ! Component: 3300 - total flux cleaned = 0.0015893 Jy ! Component: 3350 - total flux cleaned = 0.00155201 Jy ! Component: 3400 - total flux cleaned = 0.00160166 Jy ! Component: 3450 - total flux cleaned = 0.00154002 Jy ! Component: 3500 - total flux cleaned = 0.00151566 Jy ! Component: 3550 - total flux cleaned = 0.00151561 Jy ! Component: 3600 - total flux cleaned = 0.00145538 Jy ! Component: 3650 - total flux cleaned = 0.00138365 Jy ! Component: 3700 - total flux cleaned = 0.0013837 Jy ! Component: 3750 - total flux cleaned = 0.00132463 Jy ! Component: 3800 - total flux cleaned = 0.00132463 Jy ! Component: 3850 - total flux cleaned = 0.00130129 Jy ! Component: 3900 - total flux cleaned = 0.00128964 Jy ! Component: 3950 - total flux cleaned = 0.00123201 Jy ! Component: 4000 - total flux cleaned = 0.00125487 Jy ! Component: 4050 - total flux cleaned = 0.00118652 Jy ! Total flux subtracted in 4096 components = 0.00115252 Jy ! Clean residual min=-0.000623 max=0.000647 Jy/beam ! Clean residual mean=-0.000000 rms=0.000213 Jy/beam ! Combined flux in latest and established models = 0.072317 Jy keep ! Adding 286 model components to the UV plane model. ! The established model now contains 336 components and 0.072317 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0003-1547_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.585 x 15.17 at -17.71 degrees (North through East) ! Clean map min=-0.0017837 max=0.068768 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0003-1547_S_map.fits wmodel /image_prod/ug002_uva//J0003-1547_S_map.mod ! Writing 336 model components to file: /image_prod/ug002_uva//J0003-1547_S_map.mod wobs /image_prod/ug002_uva//J0003-1547_S_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0003-1547_S_uvs.fits wwins /image_prod/ug002_uva//J0003-1547_S_map.win ! wwins: Wrote 2 windows to /image_prod/ug002_uva//J0003-1547_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0687677 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000206637 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.901458 0.901458 1.80292 3.60583 7.21166 14.4233 28.8466 57.6933 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.068 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 332.794 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0003-1547_S_dfm.log closed on Wed Mar 4 18:08:31 2020