! Started logfile: /image_prod/ug002_uva//J0001-1551_X_dfm.log on Wed Mar  4 18:07:47 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /image_prod/ug002_uva//J0001-1551_X_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J0001-1551_X_uva.fits
! AN table 1: 40 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.977778 visibilities/baseline/integration-bin.
! Found source: J0001-1551
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 16896 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0001-1551_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.018790Jy  sigma=8.726016
! Fit after  self-cal, rms=0.858368Jy  sigma=7.328580
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7182 mas, bmaj=3.282 mas, bpa=-19.01 degrees
! Estimated noise=1.21191 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.107561 Jy
! Component: 100  -  total flux cleaned = 0.133315 Jy
! Total flux subtracted in 100 components = 0.133315 Jy
! Clean residual min=-0.006280 max=0.010580 Jy/beam
! Clean residual mean=-0.000007 rms=0.001535 Jy/beam
! Combined flux in latest and established models = 0.133315 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.133315 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072489Jy  sigma=0.560249
! Fit after  self-cal, rms=0.072474Jy  sigma=0.560086
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0117725 Jy
! Component: 100  -  total flux cleaned = 0.0182506 Jy
! Total flux subtracted in 100 components = 0.0182506 Jy
! Clean residual min=-0.006014 max=0.009074 Jy/beam
! Clean residual mean=0.000001 rms=0.001187 Jy/beam
! Combined flux in latest and established models = 0.151566 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 15 components and 0.151566 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069901Jy  sigma=0.533169
! Fit after  self-cal, rms=0.069923Jy  sigma=0.533064
! Inverting map 
! Added new window around map position (-2.6, 2.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00785551 Jy
! Component: 100  -  total flux cleaned = 0.0124945 Jy
! Total flux subtracted in 100 components = 0.0124945 Jy
! Clean residual min=-0.005217 max=0.005808 Jy/beam
! Clean residual mean=-0.000000 rms=0.000997 Jy/beam
! Combined flux in latest and established models = 0.16406 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 24 components and 0.16406 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068625Jy  sigma=0.521205
! Fit after  self-cal, rms=0.068601Jy  sigma=0.520852
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9642 mas, bmaj=3.574 mas, bpa=-16.83 degrees
! Estimated noise=0.64885 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00652274 Jy
! Component: 100  -  total flux cleaned = 0.0108184 Jy
! Component: 150  -  total flux cleaned = 0.0139407 Jy
! Component: 200  -  total flux cleaned = 0.0163175 Jy
! Total flux subtracted in 200 components = 0.0163175 Jy
! Clean residual min=-0.005732 max=0.004185 Jy/beam
! Clean residual mean=0.000003 rms=0.001074 Jy/beam
! Combined flux in latest and established models = 0.180378 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 49 components and 0.180378 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067809Jy  sigma=0.514054
! Fit after  self-cal, rms=0.067794Jy  sigma=0.513798
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9642 x 3.574 at -16.83 degrees (North through East)
! Clean map  min=-0.0053301  max=0.14268 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     HN        1.14     KP        1.08     
!   LA        1.01     MK        1.03     NL        1.05     OV        0.91     
!   PT        0.88     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.02     HN        1.12     KP        1.06     
!   LA        1.01     MK        1.04     NL        1.07     OV        0.90     
!   PT        0.87     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        1.05     KP        1.07     
!   LA        1.01     MK        1.01     NL        1.05     OV        0.90     
!   PT        0.89     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.05     HN        1.08     KP        1.08     
!   LA        0.98     MK        1.02     NL        1.05     OV        0.88     
!   PT        0.87     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.04     HN        1.06     KP        1.04     
!   LA        1.01     MK        1.04     NL        1.06     OV        0.93     
!   PT        0.90     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        1.14     KP        1.06     
!   LA        1.01     MK        1.02     NL        1.06     OV        0.92     
!   PT        0.87     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.02     HN        1.04     KP        1.05     
!   LA        1.02     MK        1.03     NL        1.03     OV        0.93     
!   PT        0.90     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        1.07     KP        1.06     
!   LA        1.03     MK        1.02     NL        1.07     OV        0.90     
!   PT        0.89     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.07     HN        1.04     KP        1.05     
!   LA        1.00     MK        1.01     NL        1.04     OV        0.89     
!   PT        0.88     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.02     HN        1.09     KP        1.02     
!   LA        1.00     MK        1.02     NL        1.03     OV        0.94     
!   PT        0.92     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        1.10     KP        1.07     
!   LA        1.00     MK        0.99     NL        1.05     OV        0.91     
!   PT        0.88     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.04     HN        1.04     KP        1.09     
!   LA        0.99     MK        1.04     NL        1.03     OV        0.91     
!   PT        0.88     
! 
! 
! Fit before self-cal, rms=0.067794Jy  sigma=0.513798
! Fit after  self-cal, rms=0.067843Jy  sigma=0.501185
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9818 mas, bmaj=3.576 mas, bpa=-16.84 degrees
! Estimated noise=0.646012 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00121166 Jy
! Component: 100  -  total flux cleaned = -0.00106794 Jy
! Component: 150  -  total flux cleaned = -0.00068218 Jy
! Component: 200  -  total flux cleaned = -0.000362709 Jy
! Total flux subtracted in 200 components = -0.000362709 Jy
! Clean residual min=-0.002074 max=0.002482 Jy/beam
! Clean residual mean=-0.000003 rms=0.000536 Jy/beam
! Combined flux in latest and established models = 0.180015 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 64 components and 0.180015 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067623Jy  sigma=0.499572
! Fit after  self-cal, rms=0.067672Jy  sigma=0.499407
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067672Jy  sigma=0.499407
! Fit after  self-cal, rms=0.070334Jy  sigma=0.496459
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9818 mas, bmaj=3.593 mas, bpa=-17 degrees
! Estimated noise=0.644414 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.62186e-05 Jy
! Component: 100  -  total flux cleaned = 2.17418e-05 Jy
! Component: 150  -  total flux cleaned = 0.000110008 Jy
! Component: 200  -  total flux cleaned = 0.000157676 Jy
! Total flux subtracted in 200 components = 0.000157676 Jy
! Clean residual min=-0.001706 max=0.001367 Jy/beam
! Clean residual mean=0.000001 rms=0.000370 Jy/beam
! Combined flux in latest and established models = 0.180173 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 88 components and 0.180173 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070297Jy  sigma=0.496113
! Fit after  self-cal, rms=0.070334Jy  sigma=0.496059
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.73137e-05 Jy
! Component: 100  -  total flux cleaned = 7.05164e-05 Jy
! Component: 150  -  total flux cleaned = 0.000109275 Jy
! Component: 200  -  total flux cleaned = 0.000144145 Jy
! Total flux subtracted in 200 components = 0.000144145 Jy
! Clean residual min=-0.001627 max=0.001350 Jy/beam
! Clean residual mean=0.000001 rms=0.000361 Jy/beam
! Combined flux in latest and established models = 0.180317 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 100 components and 0.180317 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070323Jy  sigma=0.495949
! Fit after  self-cal, rms=0.070321Jy  sigma=0.495939
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070321Jy  sigma=0.495939
! Fit after  self-cal, rms=0.070482Jy  sigma=0.495857
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.983 mas, bmaj=3.592 mas, bpa=-17.01 degrees
! Estimated noise=0.64351 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000358649 Jy
! Component: 100  -  total flux cleaned = -0.000403674 Jy
! Component: 150  -  total flux cleaned = -0.000422507 Jy
! Component: 200  -  total flux cleaned = -0.000454962 Jy
! Total flux subtracted in 200 components = -0.000454962 Jy
! Clean residual min=-0.001555 max=0.001326 Jy/beam
! Clean residual mean=0.000001 rms=0.000343 Jy/beam
! Combined flux in latest and established models = 0.179862 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 105 components and 0.179862 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070468Jy  sigma=0.495738
! Fit after  self-cal, rms=0.070471Jy  sigma=0.495731
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.44394e-05 Jy
! Component: 100  -  total flux cleaned = 5.70155e-06 Jy
! Component: 150  -  total flux cleaned = 1.92601e-05 Jy
! Component: 200  -  total flux cleaned = 4.46062e-05 Jy
! Total flux subtracted in 200 components = 4.46062e-05 Jy
! Clean residual min=-0.001520 max=0.001336 Jy/beam
! Clean residual mean=0.000001 rms=0.000340 Jy/beam
! Combined flux in latest and established models = 0.179906 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 110 components and 0.179906 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070465Jy  sigma=0.495681
! Fit after  self-cal, rms=0.070464Jy  sigma=0.495678
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070464Jy  sigma=0.495678
! Fit after  self-cal, rms=0.070551Jy  sigma=0.495645
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.304 mas, bmaj=4.809 mas, bpa=-0.3 degrees
! Estimated noise=0.747088 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000118147 Jy
! Component: 100  -  total flux cleaned = 0.000149172 Jy
! Component: 150  -  total flux cleaned = 0.000160075 Jy
! Component: 200  -  total flux cleaned = 0.000168257 Jy
! Total flux subtracted in 200 components = 0.000168257 Jy
! Clean residual min=-0.001592 max=0.001476 Jy/beam
! Clean residual mean=0.000001 rms=0.000419 Jy/beam
! Combined flux in latest and established models = 0.180075 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 118 components and 0.180075 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070550Jy  sigma=0.495625
! Fit after  self-cal, rms=0.070551Jy  sigma=0.495620
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.25273e-05 Jy
! Component: 100  -  total flux cleaned = 1.93021e-05 Jy
! Component: 150  -  total flux cleaned = 2.57924e-05 Jy
! Component: 200  -  total flux cleaned = 3.1709e-05 Jy
! Total flux subtracted in 200 components = 3.1709e-05 Jy
! Clean residual min=-0.001586 max=0.001450 Jy/beam
! Clean residual mean=0.000001 rms=0.000417 Jy/beam
! Combined flux in latest and established models = 0.180106 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 123 components and 0.180106 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070551Jy  sigma=0.495616
! Fit after  self-cal, rms=0.070551Jy  sigma=0.495615
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9842 mas, bmaj=3.59 mas, bpa=-17.01 degrees
! Estimated noise=0.642897 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9842 x 3.59 at -17.01 degrees (North through East)
! Clean map  min=-0.0014078  max=0.14311 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7317 mas, bmaj=3.291 mas, bpa=-19.24 degrees
! Estimated noise=1.21845 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.107978 Jy
! Component: 100  -  total flux cleaned = 0.132577 Jy
! Component: 150  -  total flux cleaned = 0.143814 Jy
! Component: 200  -  total flux cleaned = 0.151148 Jy
! Total flux subtracted in 200 components = 0.151148 Jy
! Clean residual min=-0.003146 max=0.003999 Jy/beam
! Clean residual mean=-0.000001 rms=0.000813 Jy/beam
! Combined flux in latest and established models = 0.151148 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.151148 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9842 mas, bmaj=3.59 mas, bpa=-17.01 degrees
! Estimated noise=0.642897 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00823344 Jy
! Component: 100  -  total flux cleaned = 0.013543 Jy
! Component: 150  -  total flux cleaned = 0.0172432 Jy
! Component: 200  -  total flux cleaned = 0.0199605 Jy
! Total flux subtracted in 200 components = 0.0199605 Jy
! Clean residual min=-0.001904 max=0.001958 Jy/beam
! Clean residual mean=0.000002 rms=0.000462 Jy/beam
! Combined flux in latest and established models = 0.171109 Jy
! Adding 43 model components to the UV plane model.
! The established model now contains 54 components and 0.171109 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.304 mas, bmaj=4.809 mas, bpa=-0.3 degrees
! Estimated noise=0.747088 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00300659 Jy
! Component: 100  -  total flux cleaned = 0.00495146 Jy
! Component: 150  -  total flux cleaned = 0.00625589 Jy
! Component: 200  -  total flux cleaned = 0.00714928 Jy
! Total flux subtracted in 200 components = 0.00714928 Jy
! Clean residual min=-0.001715 max=0.001525 Jy/beam
! Clean residual mean=0.000002 rms=0.000432 Jy/beam
! Combined flux in latest and established models = 0.178258 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000618683 Jy
! Component: 100  -  total flux cleaned = 0.000808146 Jy
! Component: 150  -  total flux cleaned = 0.000952703 Jy
! Component: 200  -  total flux cleaned = 0.00105148 Jy
! Total flux subtracted in 200 components = 0.00105148 Jy
! Clean residual min=-0.001573 max=0.001497 Jy/beam
! Clean residual mean=0.000002 rms=0.000419 Jy/beam
! Combined flux in latest and established models = 0.17931 Jy
! Adding 50 model components to the UV plane model.
! The established model now contains 98 components and 0.17931 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9842 mas, bmaj=3.59 mas, bpa=-17.01 degrees
! Estimated noise=0.642897 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00015443 Jy
! Component: 100  -  total flux cleaned = -0.000213334 Jy
! Component: 150  -  total flux cleaned = -0.000120298 Jy
! Component: 200  -  total flux cleaned = -3.86306e-05 Jy
! Total flux subtracted in 200 components = -3.86306e-05 Jy
! Clean residual min=-0.001369 max=0.001439 Jy/beam
! Clean residual mean=0.000001 rms=0.000337 Jy/beam
! Combined flux in latest and established models = 0.179271 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 105 components and 0.179271 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070568Jy  sigma=0.495781
! Fit after  self-cal, rms=0.070549Jy  sigma=0.495755
wmodel J0001-1551_X_map.mod
! Writing 105 model components to file: J0001-1551_X_map.mod
wobs   J0001-1551_X_uvs.fits
! Writing UV FITS file: J0001-1551_X_uvs.fits
wwins  J0001-1551_X_map.win
! wwins: Wrote 2 windows to J0001-1551_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000137822 Jy
! Component: 100  -  total flux cleaned = 0.000208374 Jy
! Component: 150  -  total flux cleaned = 0.000229097 Jy
! Component: 200  -  total flux cleaned = 0.000208118 Jy
! Component: 250  -  total flux cleaned = 0.000287582 Jy
! Component: 300  -  total flux cleaned = 0.000307097 Jy
! Component: 350  -  total flux cleaned = 0.00036247 Jy
! Component: 400  -  total flux cleaned = 0.000309409 Jy
! Component: 450  -  total flux cleaned = 0.00025798 Jy
! Component: 500  -  total flux cleaned = 0.000241586 Jy
! Component: 550  -  total flux cleaned = 0.000175798 Jy
! Component: 600  -  total flux cleaned = 0.00011151 Jy
! Component: 650  -  total flux cleaned = 9.56573e-05 Jy
! Component: 700  -  total flux cleaned = 1.82199e-05 Jy
! Component: 750  -  total flux cleaned = -5.73768e-05 Jy
! Component: 800  -  total flux cleaned = -7.26282e-05 Jy
! Component: 850  -  total flux cleaned = -0.000131029 Jy
! Component: 900  -  total flux cleaned = -0.000145687 Jy
! Component: 950  -  total flux cleaned = -0.000160059 Jy
! Component: 1000  -  total flux cleaned = -0.000174074 Jy
! Component: 1050  -  total flux cleaned = -0.000160407 Jy
! Component: 1100  -  total flux cleaned = -0.000160322 Jy
! Component: 1150  -  total flux cleaned = -0.000120028 Jy
! Component: 1200  -  total flux cleaned = -9.363e-05 Jy
! Component: 1250  -  total flux cleaned = -9.35965e-05 Jy
! Component: 1300  -  total flux cleaned = -0.000106196 Jy
! Component: 1350  -  total flux cleaned = -5.52551e-05 Jy
! Component: 1400  -  total flux cleaned = -6.77695e-05 Jy
! Component: 1450  -  total flux cleaned = -3.04865e-05 Jy
! Component: 1500  -  total flux cleaned = -3.04412e-05 Jy
! Component: 1550  -  total flux cleaned = -1.81078e-05 Jy
! Component: 1600  -  total flux cleaned = -4.19919e-05 Jy
! Component: 1650  -  total flux cleaned = 5.51413e-06 Jy
! Component: 1700  -  total flux cleaned = 4.0776e-05 Jy
! Component: 1750  -  total flux cleaned = 8.72663e-05 Jy
! Component: 1800  -  total flux cleaned = 4.1112e-05 Jy
! Component: 1850  -  total flux cleaned = 4.11767e-05 Jy
! Component: 1900  -  total flux cleaned = 2.99849e-05 Jy
! Component: 1950  -  total flux cleaned = 2.99781e-05 Jy
! Component: 2000  -  total flux cleaned = -1.45681e-05 Jy
! Component: 2050  -  total flux cleaned = 7.61118e-06 Jy
! Component: 2100  -  total flux cleaned = -3.6086e-05 Jy
! Component: 2150  -  total flux cleaned = -3.60321e-05 Jy
! Component: 2200  -  total flux cleaned = -3.60383e-05 Jy
! Component: 2250  -  total flux cleaned = -4.66263e-05 Jy
! Component: 2300  -  total flux cleaned = -4.65506e-05 Jy
! Component: 2350  -  total flux cleaned = -3.60624e-05 Jy
! Component: 2400  -  total flux cleaned = -7.76247e-05 Jy
! Component: 2450  -  total flux cleaned = -5.69027e-05 Jy
! Component: 2500  -  total flux cleaned = -3.63014e-05 Jy
! Component: 2550  -  total flux cleaned = -4.64427e-05 Jy
! Component: 2600  -  total flux cleaned = -3.62413e-05 Jy
! Component: 2650  -  total flux cleaned = -5.63434e-05 Jy
! Component: 2700  -  total flux cleaned = -5.63017e-05 Jy
! Component: 2750  -  total flux cleaned = -4.63246e-05 Jy
! Component: 2800  -  total flux cleaned = -2.66732e-05 Jy
! Component: 2850  -  total flux cleaned = -1.6959e-05 Jy
! Component: 2900  -  total flux cleaned = -3.6412e-05 Jy
! Component: 2950  -  total flux cleaned = -3.63615e-05 Jy
! Component: 3000  -  total flux cleaned = -1.72693e-05 Jy
! Component: 3050  -  total flux cleaned = -2.6784e-05 Jy
! Component: 3100  -  total flux cleaned = -7.81751e-06 Jy
! Component: 3150  -  total flux cleaned = -1.71512e-05 Jy
! Component: 3200  -  total flux cleaned = -7.9021e-06 Jy
! Component: 3250  -  total flux cleaned = -7.84853e-06 Jy
! Component: 3300  -  total flux cleaned = 1.42966e-06 Jy
! Component: 3350  -  total flux cleaned = 1.97517e-05 Jy
! Component: 3400  -  total flux cleaned = 2.88187e-05 Jy
! Component: 3450  -  total flux cleaned = 2.88519e-05 Jy
! Component: 3500  -  total flux cleaned = 2.08822e-06 Jy
! Component: 3550  -  total flux cleaned = 1.98765e-05 Jy
! Component: 3600  -  total flux cleaned = 2.24335e-06 Jy
! Component: 3650  -  total flux cleaned = 2.28634e-06 Jy
! Component: 3700  -  total flux cleaned = 2.84727e-05 Jy
! Component: 3750  -  total flux cleaned = 1.97564e-05 Jy
! Component: 3800  -  total flux cleaned = 1.10421e-05 Jy
! Component: 3850  -  total flux cleaned = -6.13514e-06 Jy
! Component: 3900  -  total flux cleaned = -3.17853e-05 Jy
! Component: 3950  -  total flux cleaned = -3.17459e-05 Jy
! Component: 4000  -  total flux cleaned = -2.33034e-05 Jy
! Component: 4050  -  total flux cleaned = -2.32256e-05 Jy
! Total flux subtracted in 4096 components = -1.49308e-05 Jy
! Clean residual min=-0.000556 max=0.000465 Jy/beam
! Clean residual mean=-0.000000 rms=0.000150 Jy/beam
! Combined flux in latest and established models = 0.179256 Jy
keep
! Adding 267 model components to the UV plane model.
! The established model now contains 372 components and 0.179256 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J0001-1551_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9842 x 3.59 at -17.01 degrees (North through East)
! Clean map  min=-0.00093759  max=0.14328 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J0001-1551_X_map.fits
wmodel /image_prod/ug002_uva//J0001-1551_X_map.mod
! Writing 372 model components to file: /image_prod/ug002_uva//J0001-1551_X_map.mod
wobs   /image_prod/ug002_uva//J0001-1551_X_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J0001-1551_X_uvs.fits
wwins  /image_prod/ug002_uva//J0001-1551_X_map.win
! wwins: Wrote 3 windows to /image_prod/ug002_uva//J0001-1551_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.143278 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000148372 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.310666 0.310666 0.621333 1.24267 2.48533 4.97066 9.94132 19.8826 39.7653 79.5306
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.143 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  965.666 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J0001-1551_X_dfm.log closed on Wed Mar  4 18:07:52 2020