! Started logfile: /image_prod/ug002_uvm//J2355+2835_X_a_dfm.log on Wed Mar 4 17:48:35 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uvm//J2355+2835_X_a_uvm.fits ! Reading UV FITS file: /image_prod/ug002_uvm//J2355+2835_X_a_uvm.fits ! AN table 1: 50 integrations on 21 of 21 possible baselines. ! AN table 2: 100 integrations on 36 of 36 possible baselines. ! AN table 3: 90 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.914923 visibilities/baseline/integration-bin. ! Found source: J2355+2835 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 78720 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J2355+2835_X_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 50 telescope corrections were flagged in sub-array 2. ! A total of 30 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 50 telescope corrections were flagged in sub-array 2. ! A total of 30 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 50 telescope corrections were flagged in sub-array 2. ! A total of 30 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 50 telescope corrections were flagged in sub-array 2. ! A total of 30 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 5. ! A total of 50 telescope corrections were flagged in sub-array 2. ! A total of 30 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 6. ! A total of 50 telescope corrections were flagged in sub-array 2. ! A total of 30 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 7. ! A total of 50 telescope corrections were flagged in sub-array 2. ! A total of 30 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 8. ! A total of 50 telescope corrections were flagged in sub-array 2. ! A total of 30 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 9. ! A total of 50 telescope corrections were flagged in sub-array 2. ! A total of 30 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 10. ! A total of 50 telescope corrections were flagged in sub-array 2. ! A total of 30 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 11. ! A total of 50 telescope corrections were flagged in sub-array 2. ! A total of 30 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 12. ! A total of 50 telescope corrections were flagged in sub-array 2. ! A total of 30 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=1.002047Jy sigma=9.637474 ! Fit after self-cal, rms=0.973589Jy sigma=9.366744 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7322 mas, bmaj=1.425 mas, bpa=-0.1305 degrees ! Estimated noise=0.632766 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0214638 Jy ! Component: 100 - total flux cleaned = 0.0262527 Jy ! Total flux subtracted in 100 components = 0.0262527 Jy ! Clean residual min=-0.001704 max=0.002871 Jy/beam ! Clean residual mean=0.000001 rms=0.000401 Jy/beam ! Combined flux in latest and established models = 0.0262527 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.0262527 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052680Jy sigma=0.465812 ! Fit after self-cal, rms=0.050869Jy sigma=0.447170 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00371367 Jy ! Component: 100 - total flux cleaned = 0.00413475 Jy ! Total flux subtracted in 100 components = 0.00413475 Jy ! Clean residual min=-0.001895 max=0.002933 Jy/beam ! Clean residual mean=0.000002 rms=0.000394 Jy/beam ! Combined flux in latest and established models = 0.0303874 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 11 components and 0.0303874 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050583Jy sigma=0.444626 ! Fit after self-cal, rms=0.050566Jy sigma=0.444505 ! Inverting map ! Added new window around map position (-2.4, -1.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00258668 Jy ! Component: 100 - total flux cleaned = 0.00339666 Jy ! Total flux subtracted in 100 components = 0.00339666 Jy ! Clean residual min=-0.001792 max=0.002745 Jy/beam ! Clean residual mean=0.000001 rms=0.000371 Jy/beam ! Combined flux in latest and established models = 0.0337841 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 20 components and 0.0337841 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050451Jy sigma=0.443288 ! Fit after self-cal, rms=0.050369Jy sigma=0.442601 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00188231 Jy ! Component: 100 - total flux cleaned = 0.00209251 Jy ! Total flux subtracted in 100 components = 0.00209251 Jy ! Clean residual min=-0.001814 max=0.002198 Jy/beam ! Clean residual mean=0.000001 rms=0.000366 Jy/beam ! Combined flux in latest and established models = 0.0358766 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 22 components and 0.0358766 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050310Jy sigma=0.442014 ! Fit after self-cal, rms=0.050262Jy sigma=0.441585 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9313 mas, bmaj=1.733 mas, bpa=0.2616 degrees ! Estimated noise=0.266965 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00133123 Jy ! Component: 100 - total flux cleaned = 0.00128033 Jy ! Component: 150 - total flux cleaned = 0.00133402 Jy ! Component: 200 - total flux cleaned = 0.0013634 Jy ! Total flux subtracted in 200 components = 0.0013634 Jy ! Clean residual min=-0.000805 max=0.001666 Jy/beam ! Clean residual mean=-0.000001 rms=0.000194 Jy/beam ! Combined flux in latest and established models = 0.03724 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 40 components and 0.03724 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050221Jy sigma=0.441196 ! Fit after self-cal, rms=0.050179Jy sigma=0.440903 ! Inverting map ! Added new window around map position (2, 1.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00124725 Jy ! Component: 100 - total flux cleaned = 0.00131624 Jy ! Component: 150 - total flux cleaned = 0.00131369 Jy ! Component: 200 - total flux cleaned = 0.00131453 Jy ! Total flux subtracted in 200 components = 0.00131453 Jy ! Clean residual min=-0.000756 max=0.000829 Jy/beam ! Clean residual mean=-0.000001 rms=0.000175 Jy/beam ! Combined flux in latest and established models = 0.0385545 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 59 components and 0.0385545 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050140Jy sigma=0.440529 ! Fit after self-cal, rms=0.050107Jy sigma=0.440372 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9313 x 1.733 at 0.2616 degrees (North through East) ! Clean map min=-0.00077736 max=0.029358 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 HN 0.99 KP 1.07 LA 0.97 ! MK 1.20 NL 1.12 SC 0.89 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.07 FD 1.10 HN 1.00 KP 1.09 ! LA 1.12 MK 1.18 OV 0.91 PT 0.95 ! SC 1.03 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 FD 1.16 HN 1.05 KP 1.01 ! NL 1.05 OV 1.11 PT 0.93 SC 1.06 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 HN 0.98 KP 1.13 LA 1.05 ! MK 1.07 NL 1.11 SC 0.80 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.05 FD 1.01 HN 0.90 KP 1.11 ! LA 1.00 MK 1.23 OV 0.95 PT 1.03 ! SC 1.05 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.12 FD 0.99 HN 1.08 KP 0.97 ! NL 1.11 OV 1.04 PT 1.05 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 HN 0.94 KP 1.08 LA 1.04 ! MK 1.01 NL 1.22 SC 0.90 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 1.03 HN 0.95 KP 1.13 ! LA 1.05 MK 1.18 OV 0.96 PT 1.00 ! SC 0.95 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.07 FD 1.05 HN 1.06 KP 0.98 ! NL 1.06 OV 1.09 PT 1.13 SC 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 HN 0.90 KP 1.11 LA 1.10 ! MK 1.02 NL 1.23 SC 0.93 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 1.04 HN 1.02 KP 1.04 ! LA 1.06 MK 1.09 OV 0.94 PT 0.99 ! SC 0.97 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.07 FD 1.03 HN 1.13 KP 0.97 ! NL 1.06 OV 1.12 PT 1.06 SC 0.99 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 HN 0.91 KP 1.03 LA 1.00 ! MK 1.01 NL 1.21 SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 1.05 HN 0.89 KP 1.02 ! LA 1.05 MK 1.05 OV 0.93 PT 0.92 ! SC 1.07 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.12 FD 0.97 HN 0.94 KP 1.02 ! NL 1.10 OV 1.10 PT 0.82 SC 0.96 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 HN 0.90 KP 1.08 LA 0.99 ! MK 1.15 NL 1.09 SC 0.91 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 FD 1.07 HN 0.94 KP 1.14 ! LA 1.06 MK 1.09 OV 0.90 PT 0.95 ! SC 1.08 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.05 FD 1.06 HN 0.96 KP 1.06 ! NL 1.09 OV 1.05 PT 1.04 SC 0.96 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 HN 1.00 KP 1.08 LA 1.06 ! MK 1.04 NL 1.12 SC 0.76 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 1.09 HN 0.88 KP 1.08 ! LA 1.07 MK 1.12 OV 0.92 PT 0.98 ! SC 1.00 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.08 FD 1.13 HN 1.16 KP 0.94 ! NL 0.94 OV 1.09 PT 1.05 SC 0.99 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 HN 0.86 KP 1.08 LA 1.05 ! MK 1.02 NL 1.19 SC 0.73 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 1.01 HN 0.86 KP 1.12 ! LA 1.07 MK 1.12 OV 0.88 PT 0.90 ! SC 1.00 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.12 FD 1.01 HN 0.96 KP 1.00 ! NL 0.94 OV 1.02 PT 1.10 SC 0.95 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 HN 0.86 KP 1.00 LA 1.08 ! MK 0.96 NL 1.20 SC 0.87 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 1.02 HN 0.92 KP 1.08 ! LA 1.00 MK 1.04 OV 0.93 PT 0.95 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.09 FD 0.91 HN 1.02 KP 0.91 ! NL 1.06 OV 1.05 PT 1.05 SC 0.98 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 HN 0.77 KP 1.02 LA 1.03 ! MK 0.97 NL 1.17 SC 0.88 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 FD 1.03 HN 0.99 KP 1.06 ! LA 1.00 MK 1.03 OV 0.93 PT 0.91 ! SC 1.03 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 1.03 HN 0.89 KP 1.02 ! NL 1.12 OV 0.96 PT 0.97 SC 0.91 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 HN 0.95 KP 0.97 LA 0.99 ! MK 0.94 NL 0.97 SC 0.76 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.91 FD 0.94 HN 0.81 KP 1.08 ! LA 1.08 MK 0.91 OV 0.90 PT 0.96 ! SC 0.94 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.01 FD 1.06 HN 1.00 KP 0.90 ! NL 0.93 OV 1.05 PT 0.97 SC 0.94 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 HN 0.72 KP 1.02 LA 1.06 ! MK 0.88 NL 0.97 SC 0.72 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.83 FD 1.02 HN 0.95 KP 1.06 ! LA 1.07 MK 0.89 OV 0.91 PT 0.84 ! SC 0.84 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.95 FD 0.97 HN 0.92 KP 0.92 ! NL 0.95 OV 1.06 PT 1.07 SC 0.91 ! ! ! Fit before self-cal, rms=0.050107Jy sigma=0.440372 ! Fit after self-cal, rms=0.049177Jy sigma=0.438907 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9249 mas, bmaj=1.721 mas, bpa=0.2794 degrees ! Estimated noise=0.268945 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1, -0.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000758108 Jy ! Component: 100 - total flux cleaned = 0.000978125 Jy ! Component: 150 - total flux cleaned = 0.000992753 Jy ! Component: 200 - total flux cleaned = 0.00103257 Jy ! Total flux subtracted in 200 components = 0.00103257 Jy ! Clean residual min=-0.000540 max=0.000535 Jy/beam ! Clean residual mean=-0.000001 rms=0.000127 Jy/beam ! Combined flux in latest and established models = 0.0395871 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 78 components and 0.0395871 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.049161Jy sigma=0.438777 ! Fit after self-cal, rms=0.049162Jy sigma=0.438368 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.049162Jy sigma=0.438368 ! Fit after self-cal, rms=0.048938Jy sigma=0.437766 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.921 mas, bmaj=1.716 mas, bpa=0.2957 degrees ! Estimated noise=0.269309 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000522154 Jy ! Component: 100 - total flux cleaned = 0.000655726 Jy ! Component: 150 - total flux cleaned = 0.00071857 Jy ! Component: 200 - total flux cleaned = 0.00076345 Jy ! Total flux subtracted in 200 components = 0.00076345 Jy ! Clean residual min=-0.000594 max=0.000463 Jy/beam ! Clean residual mean=-0.000000 rms=0.000116 Jy/beam ! Combined flux in latest and established models = 0.0403505 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 85 components and 0.0403505 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.048929Jy sigma=0.437690 ! Fit after self-cal, rms=0.048946Jy sigma=0.437468 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.13838e-05 Jy ! Component: 100 - total flux cleaned = 4.86951e-05 Jy ! Component: 150 - total flux cleaned = 7.0864e-05 Jy ! Component: 200 - total flux cleaned = 8.12227e-05 Jy ! Total flux subtracted in 200 components = 8.12227e-05 Jy ! Clean residual min=-0.000572 max=0.000486 Jy/beam ! Clean residual mean=-0.000000 rms=0.000117 Jy/beam ! Combined flux in latest and established models = 0.0404317 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 91 components and 0.0404317 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.048940Jy sigma=0.437424 ! Fit after self-cal, rms=0.048935Jy sigma=0.437391 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.048935Jy sigma=0.437391 ! Fit after self-cal, rms=0.048829Jy sigma=0.437304 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9166 mas, bmaj=1.713 mas, bpa=0.3815 degrees ! Estimated noise=0.26849 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000295276 Jy ! Component: 100 - total flux cleaned = 0.000425219 Jy ! Component: 150 - total flux cleaned = 0.000485323 Jy ! Component: 200 - total flux cleaned = 0.000539566 Jy ! Total flux subtracted in 200 components = 0.000539566 Jy ! Clean residual min=-0.000554 max=0.000475 Jy/beam ! Clean residual mean=-0.000000 rms=0.000114 Jy/beam ! Combined flux in latest and established models = 0.0409713 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 96 components and 0.0409713 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.048823Jy sigma=0.437260 ! Fit after self-cal, rms=0.048835Jy sigma=0.437225 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.16563e-05 Jy ! Component: 100 - total flux cleaned = 6.16981e-05 Jy ! Component: 150 - total flux cleaned = 7.01511e-05 Jy ! Component: 200 - total flux cleaned = 7.76998e-05 Jy ! Total flux subtracted in 200 components = 7.76998e-05 Jy ! Clean residual min=-0.000550 max=0.000482 Jy/beam ! Clean residual mean=-0.000000 rms=0.000114 Jy/beam ! Combined flux in latest and established models = 0.041049 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 97 components and 0.041049 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.048832Jy sigma=0.437199 ! Fit after self-cal, rms=0.048831Jy sigma=0.437191 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.048831Jy sigma=0.437191 ! Fit after self-cal, rms=0.048650Jy sigma=0.437170 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.152 mas, bmaj=2.468 mas, bpa=5.205 degrees ! Estimated noise=0.341698 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000358438 Jy ! Component: 100 - total flux cleaned = 0.000508013 Jy ! Component: 150 - total flux cleaned = 0.000529432 Jy ! Component: 200 - total flux cleaned = 0.000541603 Jy ! Total flux subtracted in 200 components = 0.000541603 Jy ! Clean residual min=-0.000468 max=0.000505 Jy/beam ! Clean residual mean=-0.000001 rms=0.000132 Jy/beam ! Combined flux in latest and established models = 0.0415906 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 108 components and 0.0415906 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.048648Jy sigma=0.437153 ! Fit after self-cal, rms=0.048649Jy sigma=0.437124 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.51046e-05 Jy ! Component: 100 - total flux cleaned = 5.98911e-05 Jy ! Component: 150 - total flux cleaned = 6.02578e-05 Jy ! Component: 200 - total flux cleaned = 5.06495e-05 Jy ! Total flux subtracted in 200 components = 5.06495e-05 Jy ! Clean residual min=-0.000463 max=0.000511 Jy/beam ! Clean residual mean=-0.000001 rms=0.000131 Jy/beam ! Combined flux in latest and established models = 0.0416413 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 111 components and 0.0416413 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.048648Jy sigma=0.437117 ! Fit after self-cal, rms=0.048646Jy sigma=0.437108 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.913 mas, bmaj=1.711 mas, bpa=0.4227 degrees ! Estimated noise=0.267332 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.913 x 1.711 at 0.4227 degrees (North through East) ! Clean map min=-0.0005645 max=0.028821 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7178 mas, bmaj=1.409 mas, bpa=-0.1642 degrees ! Estimated noise=0.624302 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0230071 Jy ! Component: 100 - total flux cleaned = 0.0304003 Jy ! Component: 150 - total flux cleaned = 0.0341721 Jy ! Component: 200 - total flux cleaned = 0.0363648 Jy ! Total flux subtracted in 200 components = 0.0363648 Jy ! Clean residual min=-0.001588 max=0.001504 Jy/beam ! Clean residual mean=0.000001 rms=0.000336 Jy/beam ! Combined flux in latest and established models = 0.0363648 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.0363648 Jy ! Inverting map and beam ! Estimated beam: bmin=0.913 mas, bmaj=1.711 mas, bpa=0.4227 degrees ! Estimated noise=0.267332 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00210395 Jy ! Component: 100 - total flux cleaned = 0.00338827 Jy ! Component: 150 - total flux cleaned = 0.00394461 Jy ! Component: 200 - total flux cleaned = 0.00419739 Jy ! Total flux subtracted in 200 components = 0.00419739 Jy ! Clean residual min=-0.000624 max=0.000641 Jy/beam ! Clean residual mean=-0.000000 rms=0.000134 Jy/beam ! Combined flux in latest and established models = 0.0405622 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 33 components and 0.0405622 Jy ! Inverting map ! Added new window around map position (-5.2, -3.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000361702 Jy ! Component: 100 - total flux cleaned = 0.000530478 Jy ! Component: 150 - total flux cleaned = 0.000660478 Jy ! Component: 200 - total flux cleaned = 0.000759388 Jy ! Total flux subtracted in 200 components = 0.000759388 Jy ! Clean residual min=-0.000577 max=0.000482 Jy/beam ! Clean residual mean=-0.000000 rms=0.000123 Jy/beam ! Combined flux in latest and established models = 0.0413216 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 47 components and 0.0413216 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.152 mas, bmaj=2.468 mas, bpa=5.205 degrees ! Estimated noise=0.341698 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00026271 Jy ! Component: 100 - total flux cleaned = 0.000439193 Jy ! Component: 150 - total flux cleaned = 0.00051293 Jy ! Component: 200 - total flux cleaned = 0.000513065 Jy ! Total flux subtracted in 200 components = 0.000513065 Jy ! Clean residual min=-0.000467 max=0.000528 Jy/beam ! Clean residual mean=-0.000001 rms=0.000131 Jy/beam ! Combined flux in latest and established models = 0.0418347 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.86122e-06 Jy ! Component: 100 - total flux cleaned = 1.90646e-05 Jy ! Component: 150 - total flux cleaned = 4.42603e-05 Jy ! Component: 200 - total flux cleaned = 7.54039e-05 Jy ! Total flux subtracted in 200 components = 7.54039e-05 Jy ! Clean residual min=-0.000447 max=0.000518 Jy/beam ! Clean residual mean=-0.000001 rms=0.000129 Jy/beam ! Combined flux in latest and established models = 0.0419101 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 77 components and 0.0419101 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.913 mas, bmaj=1.711 mas, bpa=0.4227 degrees ! Estimated noise=0.267332 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000146838 Jy ! Component: 100 - total flux cleaned = -0.000133726 Jy ! Component: 150 - total flux cleaned = -8.28343e-05 Jy ! Component: 200 - total flux cleaned = -3.64895e-05 Jy ! Total flux subtracted in 200 components = -3.64895e-05 Jy ! Clean residual min=-0.000533 max=0.000459 Jy/beam ! Clean residual mean=-0.000000 rms=0.000114 Jy/beam ! Combined flux in latest and established models = 0.0418736 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 92 components and 0.0418736 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.048649Jy sigma=0.437163 ! Fit after self-cal, rms=0.048652Jy sigma=0.437107 wmodel J2355+2835_X_a_map.mod ! Writing 92 model components to file: J2355+2835_X_a_map.mod wobs J2355+2835_X_a_uvs.fits ! Writing UV FITS file: J2355+2835_X_a_uvs.fits wwins J2355+2835_X_a_map.win ! wwins: Wrote 5 windows to J2355+2835_X_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000139266 Jy ! Component: 100 - total flux cleaned = -0.000122692 Jy ! Component: 150 - total flux cleaned = -9.89053e-05 Jy ! Component: 200 - total flux cleaned = -7.55978e-05 Jy ! Component: 250 - total flux cleaned = -6.02943e-05 Jy ! Component: 300 - total flux cleaned = -3.06249e-05 Jy ! Component: 350 - total flux cleaned = -1.56155e-06 Jy ! Component: 400 - total flux cleaned = 5.53972e-05 Jy ! Component: 450 - total flux cleaned = 9.73079e-05 Jy ! Component: 500 - total flux cleaned = 0.000131729 Jy ! Component: 550 - total flux cleaned = 0.000152167 Jy ! Component: 600 - total flux cleaned = 0.000192617 Jy ! Component: 650 - total flux cleaned = 0.000232489 Jy ! Component: 700 - total flux cleaned = 0.000258741 Jy ! Component: 750 - total flux cleaned = 0.000304207 Jy ! Component: 800 - total flux cleaned = 0.000317151 Jy ! Component: 850 - total flux cleaned = 0.000361575 Jy ! Component: 900 - total flux cleaned = 0.000361563 Jy ! Component: 950 - total flux cleaned = 0.000392772 Jy ! Component: 1000 - total flux cleaned = 0.000436057 Jy ! Component: 1050 - total flux cleaned = 0.000448219 Jy ! Component: 1100 - total flux cleaned = 0.000478588 Jy ! Component: 1150 - total flux cleaned = 0.000508653 Jy ! Component: 1200 - total flux cleaned = 0.000514616 Jy ! Component: 1250 - total flux cleaned = 0.000561983 Jy ! Component: 1300 - total flux cleaned = 0.000573784 Jy ! Component: 1350 - total flux cleaned = 0.00056795 Jy ! Component: 1400 - total flux cleaned = 0.000625874 Jy ! Component: 1450 - total flux cleaned = 0.000643104 Jy ! Component: 1500 - total flux cleaned = 0.00066024 Jy ! Component: 1550 - total flux cleaned = 0.000671496 Jy ! Component: 1600 - total flux cleaned = 0.000682755 Jy ! Component: 1650 - total flux cleaned = 0.000682733 Jy ! Component: 1700 - total flux cleaned = 0.000704882 Jy ! Component: 1750 - total flux cleaned = 0.000715805 Jy ! Component: 1800 - total flux cleaned = 0.00073219 Jy ! Component: 1850 - total flux cleaned = 0.000732184 Jy ! Component: 1900 - total flux cleaned = 0.000748328 Jy ! Component: 1950 - total flux cleaned = 0.00078053 Jy ! Component: 2000 - total flux cleaned = 0.000801865 Jy ! Component: 2050 - total flux cleaned = 0.000828301 Jy ! Component: 2100 - total flux cleaned = 0.000833506 Jy ! Component: 2150 - total flux cleaned = 0.000859682 Jy ! Component: 2200 - total flux cleaned = 0.000870024 Jy ! Component: 2250 - total flux cleaned = 0.000911441 Jy ! Component: 2300 - total flux cleaned = 0.00092172 Jy ! Component: 2350 - total flux cleaned = 0.00091147 Jy ! Component: 2400 - total flux cleaned = 0.000962331 Jy ! Component: 2450 - total flux cleaned = 0.000972471 Jy ! Component: 2500 - total flux cleaned = 0.000997622 Jy ! Component: 2550 - total flux cleaned = 0.00100261 Jy ! Component: 2600 - total flux cleaned = 0.0010126 Jy ! Component: 2650 - total flux cleaned = 0.00101263 Jy ! Component: 2700 - total flux cleaned = 0.00104224 Jy ! Component: 2750 - total flux cleaned = 0.00105209 Jy ! Component: 2800 - total flux cleaned = 0.00109112 Jy ! Component: 2850 - total flux cleaned = 0.0010863 Jy ! Component: 2900 - total flux cleaned = 0.00109115 Jy ! Component: 2950 - total flux cleaned = 0.00113441 Jy ! Component: 3000 - total flux cleaned = 0.00112487 Jy ! Component: 3050 - total flux cleaned = 0.00112487 Jy ! Component: 3100 - total flux cleaned = 0.00115336 Jy ! Component: 3150 - total flux cleaned = 0.00115811 Jy ! Component: 3200 - total flux cleaned = 0.00117224 Jy ! Component: 3250 - total flux cleaned = 0.00117226 Jy ! Component: 3300 - total flux cleaned = 0.00119555 Jy ! Component: 3350 - total flux cleaned = 0.00120486 Jy ! Component: 3400 - total flux cleaned = 0.0012187 Jy ! Component: 3450 - total flux cleaned = 0.00122328 Jy ! Component: 3500 - total flux cleaned = 0.0012324 Jy ! Component: 3550 - total flux cleaned = 0.00124154 Jy ! Component: 3600 - total flux cleaned = 0.00122795 Jy ! Component: 3650 - total flux cleaned = 0.0012595 Jy ! Component: 3700 - total flux cleaned = 0.001273 Jy ! Component: 3750 - total flux cleaned = 0.00127745 Jy ! Component: 3800 - total flux cleaned = 0.00130419 Jy ! Component: 3850 - total flux cleaned = 0.00131752 Jy ! Component: 3900 - total flux cleaned = 0.00131752 Jy ! Component: 3950 - total flux cleaned = 0.00133073 Jy ! Component: 4000 - total flux cleaned = 0.00137457 Jy ! Component: 4050 - total flux cleaned = 0.00138329 Jy ! Total flux subtracted in 4096 components = 0.00139635 Jy ! Clean residual min=-0.000278 max=0.000268 Jy/beam ! Clean residual mean=-0.000000 rms=0.000075 Jy/beam ! Combined flux in latest and established models = 0.0432699 Jy keep ! Adding 339 model components to the UV plane model. ! The established model now contains 431 components and 0.0432699 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uvm//J2355+2835_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.913 x 1.711 at 0.4227 degrees (North through East) ! Clean map min=-0.00061735 max=0.028456 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uvm//J2355+2835_X_a_map.fits wmodel /image_prod/ug002_uvm//J2355+2835_X_a_map.mod ! Writing 431 model components to file: /image_prod/ug002_uvm//J2355+2835_X_a_map.mod wobs /image_prod/ug002_uvm//J2355+2835_X_a_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uvm//J2355+2835_X_a_uvs.fits wwins /image_prod/ug002_uvm//J2355+2835_X_a_map.win ! wwins: Wrote 6 windows to /image_prod/ug002_uvm//J2355+2835_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0284559 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 7.53149e-05 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.794017 0.794017 1.58803 3.17607 6.35214 12.7043 25.4085 50.8171 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0002 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.028 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 377.825 quit ! Quitting program ! Log file /image_prod/ug002_uvm//J2355+2835_X_a_dfm.log closed on Wed Mar 4 17:48:44 2020