! Started logfile: /image_prod/ug002_uvm//J2336-4115_S_a_dfm.log on Wed Mar 4 17:47:56 2020 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /image_prod/ug002_uvm//J2336-4115_S_a_uvm.fits ! Reading UV FITS file: /image_prod/ug002_uvm//J2336-4115_S_a_uvm.fits ! AN table 1: 8 integrations on 21 of 21 possible baselines. ! AN table 2: 6 integrations on 15 of 15 possible baselines. ! Apparent sampling: 0.922481 visibilities/baseline/integration-bin. ! Found source: J2336-4115 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 40 lines of history. ! ! Reading 714 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J2336-4115_S_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.088482Jy sigma=10.455998 ! Fit after self-cal, rms=0.564767Jy sigma=5.206040 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.958 mas, bmaj=24.41 mas, bpa=-18.74 degrees ! Estimated noise=3.40066 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.343525 Jy ! Component: 100 - total flux cleaned = 0.429148 Jy ! Total flux subtracted in 100 components = 0.429148 Jy ! Clean residual min=-0.016124 max=0.033107 Jy/beam ! Clean residual mean=-0.000355 rms=0.005873 Jy/beam ! Combined flux in latest and established models = 0.429148 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.429148 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.103917Jy sigma=0.955428 ! Fit after self-cal, rms=0.103897Jy sigma=0.955176 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.547 mas, bmaj=25.69 mas, bpa=-18.62 degrees ! Estimated noise=2.94141 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0419771 Jy ! Component: 100 - total flux cleaned = 0.0621284 Jy ! Component: 150 - total flux cleaned = 0.0731715 Jy ! Component: 200 - total flux cleaned = 0.0796933 Jy ! Total flux subtracted in 200 components = 0.0796933 Jy ! Clean residual min=-0.009747 max=0.013331 Jy/beam ! Clean residual mean=0.000061 rms=0.003159 Jy/beam ! Combined flux in latest and established models = 0.508841 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 52 components and 0.508841 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.088501Jy sigma=0.777798 ! Fit after self-cal, rms=0.088488Jy sigma=0.777278 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.547 x 25.69 at -18.62 degrees (North through East) ! Clean map min=-0.008951 max=0.37353 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00 KP 0.98 LA 1.00 MK 0.99 ! NL 1.07 OV 0.95 PT 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.07 KP 1.02 LA 0.97 MK 0.99 ! OV 0.96 PT 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 0.93 KP 0.99 LA 0.98 MK 1.03 ! NL 1.16 OV 0.92 PT 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.01 KP 0.94 LA 1.03 MK 1.03 ! OV 1.07 PT 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 1.02 KP 0.98 LA 0.99 MK 1.03 ! NL 1.04 OV 0.96 PT 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.11 KP 0.99 LA 1.03 MK 0.98 ! OV 0.97 PT 0.98 ! ! ! Fit before self-cal, rms=0.088488Jy sigma=0.777278 ! Fit after self-cal, rms=0.087061Jy sigma=0.737217 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.575 mas, bmaj=25.78 mas, bpa=-18.67 degrees ! Estimated noise=2.94626 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00198282 Jy ! Component: 100 - total flux cleaned = -0.0021743 Jy ! Component: 150 - total flux cleaned = -0.00224987 Jy ! Component: 200 - total flux cleaned = -0.00224687 Jy ! Total flux subtracted in 200 components = -0.00224687 Jy ! Clean residual min=-0.006937 max=0.008772 Jy/beam ! Clean residual mean=0.000010 rms=0.002038 Jy/beam ! Combined flux in latest and established models = 0.506594 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 70 components and 0.506594 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.086873Jy sigma=0.735584 ! Fit after self-cal, rms=0.086926Jy sigma=0.735468 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.086926Jy sigma=0.735468 ! Fit after self-cal, rms=0.087039Jy sigma=0.735283 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.574 mas, bmaj=25.78 mas, bpa=-18.68 degrees ! Estimated noise=2.9421 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00181249 Jy ! Component: 100 - total flux cleaned = -0.00188157 Jy ! Component: 150 - total flux cleaned = -0.00188122 Jy ! Component: 200 - total flux cleaned = -0.00188515 Jy ! Total flux subtracted in 200 components = -0.00188515 Jy ! Clean residual min=-0.006886 max=0.008547 Jy/beam ! Clean residual mean=0.000005 rms=0.001985 Jy/beam ! Combined flux in latest and established models = 0.504709 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 77 components and 0.504709 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.086925Jy sigma=0.734340 ! Fit after self-cal, rms=0.086918Jy sigma=0.734304 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (125.5, 83.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00673553 Jy ! Component: 100 - total flux cleaned = 0.00623526 Jy ! Component: 150 - total flux cleaned = 0.00597363 Jy ! Component: 200 - total flux cleaned = 0.0058563 Jy ! Total flux subtracted in 200 components = 0.0058563 Jy ! Clean residual min=-0.006869 max=0.007250 Jy/beam ! Clean residual mean=0.000035 rms=0.001856 Jy/beam ! Combined flux in latest and established models = 0.510565 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 106 components and 0.510565 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.086028Jy sigma=0.727166 ! Fit after self-cal, rms=0.086017Jy sigma=0.726678 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.086017Jy sigma=0.726678 ! Fit after self-cal, rms=0.086068Jy sigma=0.726085 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.574 mas, bmaj=25.78 mas, bpa=-18.69 degrees ! Estimated noise=2.93831 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00180158 Jy ! Component: 100 - total flux cleaned = 0.00150396 Jy ! Component: 150 - total flux cleaned = 0.00115149 Jy ! Component: 200 - total flux cleaned = 0.000666124 Jy ! Total flux subtracted in 200 components = 0.000666124 Jy ! Clean residual min=-0.006829 max=0.006813 Jy/beam ! Clean residual mean=0.000036 rms=0.001803 Jy/beam ! Combined flux in latest and established models = 0.511232 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 125 components and 0.511232 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.085826Jy sigma=0.724209 ! Fit after self-cal, rms=0.085834Jy sigma=0.724129 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000301508 Jy ! Component: 100 - total flux cleaned = -5.49177e-05 Jy ! Component: 150 - total flux cleaned = -0.000320902 Jy ! Component: 200 - total flux cleaned = -0.000632706 Jy ! Total flux subtracted in 200 components = -0.000632706 Jy ! Clean residual min=-0.007017 max=0.006772 Jy/beam ! Clean residual mean=0.000030 rms=0.001786 Jy/beam ! Combined flux in latest and established models = 0.510599 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 137 components and 0.510599 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.085723Jy sigma=0.723214 ! Fit after self-cal, rms=0.085722Jy sigma=0.723197 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.085722Jy sigma=0.723197 ! Fit after self-cal, rms=0.085842Jy sigma=0.723008 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.3 mas, bmaj=43.55 mas, bpa=-4.21 degrees ! Estimated noise=3.39218 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000662044 Jy ! Component: 100 - total flux cleaned = -0.00111104 Jy ! Component: 150 - total flux cleaned = -0.00133577 Jy ! Component: 200 - total flux cleaned = -0.00136924 Jy ! Total flux subtracted in 200 components = -0.00136924 Jy ! Clean residual min=-0.004880 max=0.005076 Jy/beam ! Clean residual mean=0.000035 rms=0.001758 Jy/beam ! Combined flux in latest and established models = 0.50923 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 150 components and 0.50923 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.085826Jy sigma=0.722646 ! Fit after self-cal, rms=0.085825Jy sigma=0.722618 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.97527e-05 Jy ! Component: 100 - total flux cleaned = 7.15022e-05 Jy ! Component: 150 - total flux cleaned = 7.2438e-05 Jy ! Component: 200 - total flux cleaned = 7.27007e-05 Jy ! Total flux subtracted in 200 components = 7.27007e-05 Jy ! Clean residual min=-0.004807 max=0.005099 Jy/beam ! Clean residual mean=0.000028 rms=0.001757 Jy/beam ! Combined flux in latest and established models = 0.509302 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 156 components and 0.509302 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.085826Jy sigma=0.722516 ! Fit after self-cal, rms=0.085827Jy sigma=0.722508 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.575 mas, bmaj=25.79 mas, bpa=-18.68 degrees ! Estimated noise=2.93913 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.575 x 25.79 at -18.68 degrees (North through East) ! Clean map min=-0.00673 max=0.37368 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.975 mas, bmaj=24.49 mas, bpa=-18.79 degrees ! Estimated noise=3.40879 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.344266 Jy ! Component: 100 - total flux cleaned = 0.428781 Jy ! Component: 150 - total flux cleaned = 0.461413 Jy ! Component: 200 - total flux cleaned = 0.478489 Jy ! Total flux subtracted in 200 components = 0.478489 Jy ! Clean residual min=-0.010755 max=0.010896 Jy/beam ! Clean residual mean=-0.000116 rms=0.002703 Jy/beam ! Combined flux in latest and established models = 0.478489 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 39 model components to the UV plane model. ! The established model now contains 39 components and 0.478489 Jy ! Inverting map and beam ! Estimated beam: bmin=3.575 mas, bmaj=25.79 mas, bpa=-18.68 degrees ! Estimated noise=2.93913 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-34, 76.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0134579 Jy ! Component: 100 - total flux cleaned = 0.0222697 Jy ! Component: 150 - total flux cleaned = 0.0260055 Jy ! Component: 200 - total flux cleaned = 0.0274944 Jy ! Total flux subtracted in 200 components = 0.0274944 Jy ! Clean residual min=-0.008080 max=0.005870 Jy/beam ! Clean residual mean=-0.000010 rms=0.001817 Jy/beam ! Combined flux in latest and established models = 0.505983 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 80 components and 0.505983 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.3 mas, bmaj=43.55 mas, bpa=-4.21 degrees ! Estimated noise=3.39218 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00149327 Jy ! Component: 100 - total flux cleaned = 0.00265251 Jy ! Component: 150 - total flux cleaned = 0.00344891 Jy ! Component: 200 - total flux cleaned = 0.00374789 Jy ! Total flux subtracted in 200 components = 0.00374789 Jy ! Clean residual min=-0.005169 max=0.004743 Jy/beam ! Clean residual mean=0.000033 rms=0.001636 Jy/beam ! Combined flux in latest and established models = 0.509731 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.87171e-07 Jy ! Component: 100 - total flux cleaned = -0.000100877 Jy ! Component: 150 - total flux cleaned = -0.000194006 Jy ! Component: 200 - total flux cleaned = -0.000239073 Jy ! Total flux subtracted in 200 components = -0.000239073 Jy ! Clean residual min=-0.005072 max=0.004587 Jy/beam ! Clean residual mean=0.000033 rms=0.001611 Jy/beam ! Combined flux in latest and established models = 0.509492 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 117 components and 0.509492 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.575 mas, bmaj=25.79 mas, bpa=-18.68 degrees ! Estimated noise=2.93913 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000306516 Jy ! Component: 100 - total flux cleaned = 0.0005817 Jy ! Component: 150 - total flux cleaned = 0.000710641 Jy ! Component: 200 - total flux cleaned = 0.000713425 Jy ! Total flux subtracted in 200 components = 0.000713425 Jy ! Clean residual min=-0.006591 max=0.005353 Jy/beam ! Clean residual mean=0.000027 rms=0.001625 Jy/beam ! Combined flux in latest and established models = 0.510205 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 136 components and 0.510205 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.085891Jy sigma=0.721120 ! Fit after self-cal, rms=0.085844Jy sigma=0.720878 wmodel J2336-4115_S_a_map.mod ! Writing 136 model components to file: J2336-4115_S_a_map.mod wobs J2336-4115_S_a_uvs.fits ! Writing UV FITS file: J2336-4115_S_a_uvs.fits wwins J2336-4115_S_a_map.win ! wwins: Wrote 3 windows to J2336-4115_S_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00251543 Jy ! Component: 100 - total flux cleaned = -0.00365503 Jy ! Component: 150 - total flux cleaned = -0.00409409 Jy ! Component: 200 - total flux cleaned = -0.00458668 Jy ! Component: 250 - total flux cleaned = -0.00513178 Jy ! Component: 300 - total flux cleaned = -0.00557697 Jy ! Component: 350 - total flux cleaned = -0.005931 Jy ! Component: 400 - total flux cleaned = -0.00613686 Jy ! Component: 450 - total flux cleaned = -0.0063989 Jy ! Component: 500 - total flux cleaned = -0.00633407 Jy ! Component: 550 - total flux cleaned = -0.00633351 Jy ! Component: 600 - total flux cleaned = -0.00639443 Jy ! Component: 650 - total flux cleaned = -0.00651086 Jy ! Component: 700 - total flux cleaned = -0.00651141 Jy ! Component: 750 - total flux cleaned = -0.00634572 Jy ! Component: 800 - total flux cleaned = -0.0060788 Jy ! Component: 850 - total flux cleaned = -0.00597507 Jy ! Component: 900 - total flux cleaned = -0.00576849 Jy ! Component: 950 - total flux cleaned = -0.00551813 Jy ! Component: 1000 - total flux cleaned = -0.00537101 Jy ! Component: 1050 - total flux cleaned = -0.00513131 Jy ! Component: 1100 - total flux cleaned = -0.00499079 Jy ! Component: 1150 - total flux cleaned = -0.00485296 Jy ! Component: 1200 - total flux cleaned = -0.00480739 Jy ! Component: 1250 - total flux cleaned = -0.00467516 Jy ! Component: 1300 - total flux cleaned = -0.00458795 Jy ! Component: 1350 - total flux cleaned = -0.00441703 Jy ! Component: 1400 - total flux cleaned = -0.00424933 Jy ! Component: 1450 - total flux cleaned = -0.00416697 Jy ! Component: 1500 - total flux cleaned = -0.00408475 Jy ! Component: 1550 - total flux cleaned = -0.00400356 Jy ! Component: 1600 - total flux cleaned = -0.0039241 Jy ! Component: 1650 - total flux cleaned = -0.0038076 Jy ! Component: 1700 - total flux cleaned = -0.00380759 Jy ! Component: 1750 - total flux cleaned = -0.00373209 Jy ! Component: 1800 - total flux cleaned = -0.00369481 Jy ! Component: 1850 - total flux cleaned = -0.00365798 Jy ! Component: 1900 - total flux cleaned = -0.00358534 Jy ! Component: 1950 - total flux cleaned = -0.00358488 Jy ! Component: 2000 - total flux cleaned = -0.0035493 Jy ! Component: 2050 - total flux cleaned = -0.00354938 Jy ! Component: 2100 - total flux cleaned = -0.00354951 Jy ! Component: 2150 - total flux cleaned = -0.00348071 Jy ! Component: 2200 - total flux cleaned = -0.00361682 Jy ! Component: 2250 - total flux cleaned = -0.00354917 Jy ! Component: 2300 - total flux cleaned = -0.00354913 Jy ! Component: 2350 - total flux cleaned = -0.00351598 Jy ! Component: 2400 - total flux cleaned = -0.00351627 Jy ! Component: 2450 - total flux cleaned = -0.00348336 Jy ! Component: 2500 - total flux cleaned = -0.00345058 Jy ! Component: 2550 - total flux cleaned = -0.00345065 Jy ! Component: 2600 - total flux cleaned = -0.00341794 Jy ! Component: 2650 - total flux cleaned = -0.0033854 Jy ! Component: 2700 - total flux cleaned = -0.0033207 Jy ! Component: 2750 - total flux cleaned = -0.00335322 Jy ! Component: 2800 - total flux cleaned = -0.00332097 Jy ! Component: 2850 - total flux cleaned = -0.00325644 Jy ! Component: 2900 - total flux cleaned = -0.00328863 Jy ! Component: 2950 - total flux cleaned = -0.00335328 Jy ! Component: 3000 - total flux cleaned = -0.00338564 Jy ! Component: 3050 - total flux cleaned = -0.00348287 Jy ! Component: 3100 - total flux cleaned = -0.0035807 Jy ! Component: 3150 - total flux cleaned = -0.00367871 Jy ! Component: 3200 - total flux cleaned = -0.00371153 Jy ! Component: 3250 - total flux cleaned = -0.00381038 Jy ! Component: 3300 - total flux cleaned = -0.00390952 Jy ! Component: 3350 - total flux cleaned = -0.00394281 Jy ! Component: 3400 - total flux cleaned = -0.0040764 Jy ! Component: 3450 - total flux cleaned = -0.0041771 Jy ! Component: 3500 - total flux cleaned = -0.00427849 Jy ! Component: 3550 - total flux cleaned = -0.00434642 Jy ! Component: 3600 - total flux cleaned = -0.00448321 Jy ! Component: 3650 - total flux cleaned = -0.00458626 Jy ! Component: 3700 - total flux cleaned = -0.00469014 Jy ! Component: 3750 - total flux cleaned = -0.00475973 Jy ! Component: 3800 - total flux cleaned = -0.00482971 Jy ! Component: 3850 - total flux cleaned = -0.00497029 Jy ! Component: 3900 - total flux cleaned = -0.00514768 Jy ! Component: 3950 - total flux cleaned = -0.00525501 Jy ! Component: 4000 - total flux cleaned = -0.00536265 Jy ! Component: 4050 - total flux cleaned = -0.00543496 Jy ! Total flux subtracted in 4096 components = -0.00558152 Jy ! Clean residual min=-0.002128 max=0.002028 Jy/beam ! Clean residual mean=-0.000002 rms=0.000620 Jy/beam ! Combined flux in latest and established models = 0.504624 Jy keep ! Adding 221 model components to the UV plane model. ! The established model now contains 355 components and 0.504623 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uvm//J2336-4115_S_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.575 x 25.79 at -18.68 degrees (North through East) ! Clean map min=-0.0056818 max=0.38726 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uvm//J2336-4115_S_a_map.fits wmodel /image_prod/ug002_uvm//J2336-4115_S_a_map.mod ! Writing 355 model components to file: /image_prod/ug002_uvm//J2336-4115_S_a_map.mod wobs /image_prod/ug002_uvm//J2336-4115_S_a_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uvm//J2336-4115_S_a_uvs.fits wwins /image_prod/ug002_uvm//J2336-4115_S_a_map.win ! wwins: Wrote 4 windows to /image_prod/ug002_uvm//J2336-4115_S_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.387264 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000603173 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.467258 0.467258 0.934516 1.86903 3.73806 7.47612 14.9522 29.9045 59.809 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0018 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.387 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 642.043 quit ! Quitting program ! Log file /image_prod/ug002_uvm//J2336-4115_S_a_dfm.log closed on Wed Mar 4 17:48:00 2020