! Started logfile: /image_prod/ug002_uvm//J2325-0344_X_a_dfm.log on Wed Mar 4 17:47:47 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uvm//J2325-0344_X_a_uvm.fits ! Reading UV FITS file: /image_prod/ug002_uvm//J2325-0344_X_a_uvm.fits ! AN table 1: 75 integrations on 45 of 45 possible baselines. ! AN table 2: 40 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.949948 visibilities/baseline/integration-bin. ! Found source: J2325-0344 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 54888 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J2325-0344_X_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 25 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 25 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 25 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 25 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 25 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 25 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 25 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 25 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 9. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 25 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 10. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 25 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 11. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 25 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 12. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 25 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.010128Jy sigma=8.951160 ! Fit after self-cal, rms=0.887800Jy sigma=7.826356 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6651 mas, bmaj=1.679 mas, bpa=-2.173 degrees ! Estimated noise=0.67165 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0772605 Jy ! Component: 100 - total flux cleaned = 0.105577 Jy ! Total flux subtracted in 100 components = 0.105577 Jy ! Clean residual min=-0.006319 max=0.014413 Jy/beam ! Clean residual mean=-0.000003 rms=0.001380 Jy/beam ! Combined flux in latest and established models = 0.105577 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.105577 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.077208Jy sigma=0.657370 ! Fit after self-cal, rms=0.077100Jy sigma=0.656333 ! Inverting map ! Added new window around map position (0.2, -1.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0177522 Jy ! Component: 100 - total flux cleaned = 0.029562 Jy ! Total flux subtracted in 100 components = 0.029562 Jy ! Clean residual min=-0.004606 max=0.008452 Jy/beam ! Clean residual mean=-0.000002 rms=0.001023 Jy/beam ! Combined flux in latest and established models = 0.135139 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 28 components and 0.135139 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069753Jy sigma=0.581902 ! Fit after self-cal, rms=0.069707Jy sigma=0.581372 ! Inverting map ! Added new window around map position (-1.4, -8.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00929285 Jy ! Component: 100 - total flux cleaned = 0.016076 Jy ! Total flux subtracted in 100 components = 0.016076 Jy ! Clean residual min=-0.003841 max=0.005804 Jy/beam ! Clean residual mean=-0.000001 rms=0.000892 Jy/beam ! Combined flux in latest and established models = 0.151215 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 44 components and 0.151215 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067387Jy sigma=0.557785 ! Fit after self-cal, rms=0.067359Jy sigma=0.557399 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8655 mas, bmaj=2.007 mas, bpa=-1.749 degrees ! Estimated noise=0.34843 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.2, -1.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0116604 Jy ! Component: 100 - total flux cleaned = 0.020258 Jy ! Component: 150 - total flux cleaned = 0.0271912 Jy ! Component: 200 - total flux cleaned = 0.0329153 Jy ! Total flux subtracted in 200 components = 0.0329153 Jy ! Clean residual min=-0.004703 max=0.006171 Jy/beam ! Clean residual mean=0.000001 rms=0.001194 Jy/beam ! Combined flux in latest and established models = 0.184131 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 84 components and 0.184131 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064566Jy sigma=0.528827 ! Fit after self-cal, rms=0.064461Jy sigma=0.527859 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8655 x 2.007 at -1.749 degrees (North through East) ! Clean map min=-0.0040882 max=0.10926 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.90 HN 1.01 KP 1.05 ! LA 0.97 MK 1.05 NL 1.13 OV 0.89 ! PT 0.81 SC 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.05 FD 0.95 KP 0.93 LA 1.02 ! MK 1.06 NL 0.91 OV 1.03 PT 0.97 ! SC 1.13 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.91 HN 0.98 KP 1.04 ! LA 0.98 MK 1.05 NL 1.14 OV 0.88 ! PT 0.83 SC 0.93 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.11 FD 0.97 KP 0.95 LA 1.01 ! MK 0.98 NL 0.95 OV 1.00 PT 0.98 ! SC 1.10 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.91 HN 0.98 KP 1.06 ! LA 1.02 MK 1.05 NL 1.11 OV 0.89 ! PT 0.82 SC 0.92 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.05 FD 1.04 KP 0.96 LA 1.02 ! MK 1.01 NL 0.97 OV 1.04 PT 0.92 ! SC 1.20 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.91 HN 1.01 KP 1.05 ! LA 0.98 MK 1.11 NL 1.12 OV 0.90 ! PT 0.82 SC 0.95 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.05 FD 0.94 KP 0.96 LA 1.07 ! MK 1.10 NL 0.95 OV 1.02 PT 0.97 ! SC 1.23 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.92 HN 1.02 KP 1.06 ! LA 0.99 MK 1.06 NL 1.09 OV 0.89 ! PT 0.81 SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.08 FD 1.01 KP 0.97 LA 1.05 ! MK 1.06 NL 0.93 OV 1.01 PT 0.96 ! SC 1.06 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.94 HN 1.01 KP 1.05 ! LA 1.01 MK 1.05 NL 1.11 OV 0.90 ! PT 0.82 SC 0.92 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.10 FD 1.01 KP 0.98 LA 1.02 ! MK 0.99 NL 0.90 OV 1.03 PT 0.98 ! SC 1.13 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.90 HN 0.99 KP 1.08 ! LA 1.00 MK 1.08 NL 1.11 OV 0.91 ! PT 0.82 SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.08 FD 0.96 KP 0.96 LA 1.05 ! MK 1.08 NL 0.93 OV 1.02 PT 0.99 ! SC 1.13 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.93 HN 1.04 KP 1.09 ! LA 1.00 MK 1.10 NL 1.14 OV 0.90 ! PT 0.83 SC 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.08 FD 0.94 KP 0.97 LA 1.03 ! MK 1.10 NL 0.95 OV 1.01 PT 1.03 ! SC 1.11 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.88 HN 1.06 KP 1.05 ! LA 1.00 MK 1.10 NL 1.14 OV 0.90 ! PT 0.85 SC 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 1.00 KP 0.95 LA 1.02 ! MK 1.05 NL 0.91 OV 1.02 PT 1.06 ! SC 1.14 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.93 HN 1.04 KP 1.04 ! LA 1.00 MK 1.08 NL 1.11 OV 0.92 ! PT 0.83 SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.04 FD 0.95 KP 0.95 LA 1.06 ! MK 1.05 NL 0.88 OV 1.08 PT 0.98 ! SC 1.12 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.88 HN 1.01 KP 1.08 ! LA 1.02 MK 0.98 NL 1.10 OV 0.93 ! PT 0.83 SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.11 FD 0.99 KP 0.91 LA 1.02 ! MK 1.02 NL 0.93 OV 1.02 PT 1.00 ! SC 1.25 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.88 HN 1.01 KP 1.08 ! LA 1.00 MK 1.02 NL 1.15 OV 0.93 ! PT 0.86 SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.09 FD 0.97 KP 0.96 LA 1.04 ! MK 1.00 NL 0.94 OV 1.07 PT 0.94 ! SC 1.23 ! ! ! Fit before self-cal, rms=0.064461Jy sigma=0.527859 ! Fit after self-cal, rms=0.061458Jy sigma=0.509400 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8833 mas, bmaj=2.041 mas, bpa=-1.244 degrees ! Estimated noise=0.341683 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.2, -8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00603376 Jy ! Component: 100 - total flux cleaned = 0.00896207 Jy ! Component: 150 - total flux cleaned = 0.0104446 Jy ! Component: 200 - total flux cleaned = 0.0114155 Jy ! Total flux subtracted in 200 components = 0.0114155 Jy ! Clean residual min=-0.002761 max=0.004925 Jy/beam ! Clean residual mean=0.000001 rms=0.000728 Jy/beam ! Combined flux in latest and established models = 0.195546 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 107 components and 0.195546 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060853Jy sigma=0.502735 ! Fit after self-cal, rms=0.060865Jy sigma=0.502279 ! Inverting map ! Added new window around map position (2.6, -39.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00474785 Jy ! Component: 100 - total flux cleaned = 0.00733696 Jy ! Component: 150 - total flux cleaned = 0.00938126 Jy ! Component: 200 - total flux cleaned = 0.0110924 Jy ! Total flux subtracted in 200 components = 0.0110924 Jy ! Clean residual min=-0.002377 max=0.002768 Jy/beam ! Clean residual mean=0.000000 rms=0.000609 Jy/beam ! Combined flux in latest and established models = 0.206638 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 136 components and 0.206638 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060482Jy sigma=0.497925 ! Fit after self-cal, rms=0.060445Jy sigma=0.497582 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060445Jy sigma=0.497582 ! Fit after self-cal, rms=0.061633Jy sigma=0.487104 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8808 mas, bmaj=2.044 mas, bpa=-1.318 degrees ! Estimated noise=0.341408 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0023113 Jy ! Component: 100 - total flux cleaned = 0.00401419 Jy ! Component: 150 - total flux cleaned = 0.00525752 Jy ! Component: 200 - total flux cleaned = 0.0061378 Jy ! Total flux subtracted in 200 components = 0.0061378 Jy ! Clean residual min=-0.001559 max=0.001895 Jy/beam ! Clean residual mean=0.000000 rms=0.000326 Jy/beam ! Combined flux in latest and established models = 0.212776 Jy selfcal ! Performing phase self-cal ! Adding 50 model components to the UV plane model. ! The established model now contains 173 components and 0.212776 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061517Jy sigma=0.485673 ! Fit after self-cal, rms=0.061574Jy sigma=0.485488 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4, -27). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00185851 Jy ! Component: 100 - total flux cleaned = 0.00264001 Jy ! Component: 150 - total flux cleaned = 0.00325012 Jy ! Component: 200 - total flux cleaned = 0.00365313 Jy ! Total flux subtracted in 200 components = 0.00365313 Jy ! Clean residual min=-0.001425 max=0.001556 Jy/beam ! Clean residual mean=0.000000 rms=0.000278 Jy/beam ! Combined flux in latest and established models = 0.216429 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 203 components and 0.216429 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061508Jy sigma=0.484696 ! Fit after self-cal, rms=0.061504Jy sigma=0.484668 ! Inverting map ! Added new window around map position (2.2, -34.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00135116 Jy ! Component: 100 - total flux cleaned = 0.00170426 Jy ! Component: 150 - total flux cleaned = 0.00204447 Jy ! Component: 200 - total flux cleaned = 0.00229865 Jy ! Total flux subtracted in 200 components = 0.00229865 Jy ! Clean residual min=-0.001337 max=0.001231 Jy/beam ! Clean residual mean=-0.000000 rms=0.000255 Jy/beam ! Combined flux in latest and established models = 0.218728 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 225 components and 0.218728 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061459Jy sigma=0.484217 ! Fit after self-cal, rms=0.061456Jy sigma=0.484196 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061456Jy sigma=0.484196 ! Fit after self-cal, rms=0.061792Jy sigma=0.484002 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8801 mas, bmaj=2.043 mas, bpa=-1.38 degrees ! Estimated noise=0.341303 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000793646 Jy ! Component: 100 - total flux cleaned = 0.0014026 Jy ! Component: 150 - total flux cleaned = 0.00186001 Jy ! Component: 200 - total flux cleaned = 0.00208046 Jy ! Total flux subtracted in 200 components = 0.00208046 Jy ! Clean residual min=-0.001165 max=0.001122 Jy/beam ! Clean residual mean=-0.000000 rms=0.000229 Jy/beam ! Combined flux in latest and established models = 0.220808 Jy selfcal ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 242 components and 0.220808 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061767Jy sigma=0.483734 ! Fit after self-cal, rms=0.061769Jy sigma=0.483715 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000283942 Jy ! Component: 100 - total flux cleaned = 0.000515915 Jy ! Component: 150 - total flux cleaned = 0.000646438 Jy ! Component: 200 - total flux cleaned = 0.000750279 Jy ! Total flux subtracted in 200 components = 0.000750279 Jy ! Clean residual min=-0.001133 max=0.001055 Jy/beam ! Clean residual mean=-0.000000 rms=0.000222 Jy/beam ! Combined flux in latest and established models = 0.221559 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 256 components and 0.221559 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061753Jy sigma=0.483571 ! Fit after self-cal, rms=0.061752Jy sigma=0.483565 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061752Jy sigma=0.483565 ! Fit after self-cal, rms=0.061810Jy sigma=0.483535 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.24 mas, bmaj=3.557 mas, bpa=5.696 degrees ! Estimated noise=0.422628 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00104162 Jy ! Component: 100 - total flux cleaned = 0.00178582 Jy ! Component: 150 - total flux cleaned = 0.002318 Jy ! Component: 200 - total flux cleaned = 0.00266318 Jy ! Total flux subtracted in 200 components = 0.00266318 Jy ! Clean residual min=-0.000994 max=0.000944 Jy/beam ! Clean residual mean=-0.000000 rms=0.000270 Jy/beam ! Combined flux in latest and established models = 0.224222 Jy selfcal ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 276 components and 0.224222 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061801Jy sigma=0.483434 ! Fit after self-cal, rms=0.061799Jy sigma=0.483416 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000176994 Jy ! Component: 100 - total flux cleaned = 0.000274416 Jy ! Component: 150 - total flux cleaned = 0.00036144 Jy ! Component: 200 - total flux cleaned = 0.00045711 Jy ! Total flux subtracted in 200 components = 0.00045711 Jy ! Clean residual min=-0.000962 max=0.000909 Jy/beam ! Clean residual mean=-0.000000 rms=0.000262 Jy/beam ! Combined flux in latest and established models = 0.224679 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 282 components and 0.224679 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061793Jy sigma=0.483354 ! Fit after self-cal, rms=0.061790Jy sigma=0.483344 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8792 mas, bmaj=2.042 mas, bpa=-1.447 degrees ! Estimated noise=0.341115 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8792 x 2.042 at -1.447 degrees (North through East) ! Clean map min=-0.0013084 max=0.10696 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6726 mas, bmaj=1.7 mas, bpa=-1.902 degrees ! Estimated noise=0.668091 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0762197 Jy ! Component: 100 - total flux cleaned = 0.104097 Jy ! Component: 150 - total flux cleaned = 0.121195 Jy ! Component: 200 - total flux cleaned = 0.133069 Jy ! Total flux subtracted in 200 components = 0.133069 Jy ! Clean residual min=-0.004018 max=0.006747 Jy/beam ! Clean residual mean=-0.000002 rms=0.000885 Jy/beam ! Combined flux in latest and established models = 0.133069 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.133069 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8792 mas, bmaj=2.042 mas, bpa=-1.447 degrees ! Estimated noise=0.341115 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0153318 Jy ! Component: 100 - total flux cleaned = 0.0259328 Jy ! Component: 150 - total flux cleaned = 0.0342063 Jy ! Component: 200 - total flux cleaned = 0.0409457 Jy ! Total flux subtracted in 200 components = 0.0409457 Jy ! Clean residual min=-0.003175 max=0.004610 Jy/beam ! Clean residual mean=-0.000000 rms=0.000847 Jy/beam ! Combined flux in latest and established models = 0.174014 Jy ! Adding 59 model components to the UV plane model. ! The established model now contains 76 components and 0.174014 Jy ! Inverting map ! Added new window around map position (-1.6, -10.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00580799 Jy ! Component: 100 - total flux cleaned = 0.0107593 Jy ! Component: 150 - total flux cleaned = 0.0150542 Jy ! Component: 200 - total flux cleaned = 0.0188041 Jy ! Total flux subtracted in 200 components = 0.0188041 Jy ! Clean residual min=-0.002240 max=0.002470 Jy/beam ! Clean residual mean=0.000000 rms=0.000546 Jy/beam ! Combined flux in latest and established models = 0.192818 Jy ! Adding 62 model components to the UV plane model. ! The established model now contains 123 components and 0.192818 Jy ! Inverting map ! Added new window around map position (-0.6, 1.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00331814 Jy ! Component: 100 - total flux cleaned = 0.00625134 Jy ! Component: 150 - total flux cleaned = 0.00886635 Jy ! Component: 200 - total flux cleaned = 0.0112082 Jy ! Total flux subtracted in 200 components = 0.0112082 Jy ! Clean residual min=-0.001736 max=0.001815 Jy/beam ! Clean residual mean=0.000000 rms=0.000389 Jy/beam ! Combined flux in latest and established models = 0.204027 Jy ! Adding 74 model components to the UV plane model. ! The established model now contains 173 components and 0.204027 Jy ! Inverting map ! Added new window around map position (1.2, 2.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0021682 Jy ! Component: 100 - total flux cleaned = 0.00407345 Jy ! Component: 150 - total flux cleaned = 0.00578913 Jy ! Component: 200 - total flux cleaned = 0.00728062 Jy ! Total flux subtracted in 200 components = 0.00728062 Jy ! Clean residual min=-0.001402 max=0.001324 Jy/beam ! Clean residual mean=0.000000 rms=0.000303 Jy/beam ! Combined flux in latest and established models = 0.211307 Jy ! Adding 75 model components to the UV plane model. ! The established model now contains 220 components and 0.211307 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.24 mas, bmaj=3.557 mas, bpa=5.696 degrees ! Estimated noise=0.422628 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00248582 Jy ! Component: 100 - total flux cleaned = 0.00449195 Jy ! Component: 150 - total flux cleaned = 0.00603132 Jy ! Component: 200 - total flux cleaned = 0.00716735 Jy ! Total flux subtracted in 200 components = 0.00716735 Jy ! Clean residual min=-0.001265 max=0.001187 Jy/beam ! Clean residual mean=0.000000 rms=0.000331 Jy/beam ! Combined flux in latest and established models = 0.218475 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000979089 Jy ! Component: 100 - total flux cleaned = 0.00179195 Jy ! Component: 150 - total flux cleaned = 0.00250968 Jy ! Component: 200 - total flux cleaned = 0.00308447 Jy ! Total flux subtracted in 200 components = 0.00308447 Jy ! Clean residual min=-0.001021 max=0.000964 Jy/beam ! Clean residual mean=0.000000 rms=0.000277 Jy/beam ! Combined flux in latest and established models = 0.221559 Jy ! Adding 98 model components to the UV plane model. ! The established model now contains 294 components and 0.221559 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8792 mas, bmaj=2.042 mas, bpa=-1.447 degrees ! Estimated noise=0.341115 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.90366e-06 Jy ! Component: 100 - total flux cleaned = 6.70978e-05 Jy ! Component: 150 - total flux cleaned = 0.000311141 Jy ! Component: 200 - total flux cleaned = 0.000561928 Jy ! Total flux subtracted in 200 components = 0.000561928 Jy ! Clean residual min=-0.000876 max=0.000805 Jy/beam ! Clean residual mean=-0.000000 rms=0.000203 Jy/beam ! Combined flux in latest and established models = 0.222121 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 320 components and 0.222121 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061777Jy sigma=0.483172 ! Fit after self-cal, rms=0.061765Jy sigma=0.483077 wmodel J2325-0344_X_a_map.mod ! Writing 320 model components to file: J2325-0344_X_a_map.mod wobs J2325-0344_X_a_uvs.fits ! Writing UV FITS file: J2325-0344_X_a_uvs.fits wwins J2325-0344_X_a_map.win ! wwins: Wrote 11 windows to J2325-0344_X_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000225182 Jy ! Component: 100 - total flux cleaned = -0.000239584 Jy ! Component: 150 - total flux cleaned = -0.000253322 Jy ! Component: 200 - total flux cleaned = -0.000226518 Jy ! Component: 250 - total flux cleaned = -0.000239673 Jy ! Component: 300 - total flux cleaned = -0.000277813 Jy ! Component: 350 - total flux cleaned = -0.000315136 Jy ! Component: 400 - total flux cleaned = -0.000376135 Jy ! Component: 450 - total flux cleaned = -0.000388171 Jy ! Component: 500 - total flux cleaned = -0.000471064 Jy ! Component: 550 - total flux cleaned = -0.000529071 Jy ! Component: 600 - total flux cleaned = -0.000551963 Jy ! Component: 650 - total flux cleaned = -0.000574419 Jy ! Component: 700 - total flux cleaned = -0.000608211 Jy ! Component: 750 - total flux cleaned = -0.000674429 Jy ! Component: 800 - total flux cleaned = -0.00067447 Jy ! Component: 850 - total flux cleaned = -0.000717717 Jy ! Component: 900 - total flux cleaned = -0.000771079 Jy ! Component: 950 - total flux cleaned = -0.000770971 Jy ! Component: 1000 - total flux cleaned = -0.000771195 Jy ! Component: 1050 - total flux cleaned = -0.000812571 Jy ! Component: 1100 - total flux cleaned = -0.000822582 Jy ! Component: 1150 - total flux cleaned = -0.000842804 Jy ! Component: 1200 - total flux cleaned = -0.000852771 Jy ! Component: 1250 - total flux cleaned = -0.000872632 Jy ! Component: 1300 - total flux cleaned = -0.0009221 Jy ! Component: 1350 - total flux cleaned = -0.000961054 Jy ! Component: 1400 - total flux cleaned = -0.000931833 Jy ! Component: 1450 - total flux cleaned = -0.000970261 Jy ! Component: 1500 - total flux cleaned = -0.000989287 Jy ! Component: 1550 - total flux cleaned = -0.00100817 Jy ! Component: 1600 - total flux cleaned = -0.00100815 Jy ! Component: 1650 - total flux cleaned = -0.00100816 Jy ! Component: 1700 - total flux cleaned = -0.00104515 Jy ! Component: 1750 - total flux cleaned = -0.00101757 Jy ! Component: 1800 - total flux cleaned = -0.00101762 Jy ! Component: 1850 - total flux cleaned = -0.00101769 Jy ! Component: 1900 - total flux cleaned = -0.00102665 Jy ! Component: 1950 - total flux cleaned = -0.00102673 Jy ! Component: 2000 - total flux cleaned = -0.00102661 Jy ! Component: 2050 - total flux cleaned = -0.00101792 Jy ! Component: 2100 - total flux cleaned = -0.00106156 Jy ! Component: 2150 - total flux cleaned = -0.00104419 Jy ! Component: 2200 - total flux cleaned = -0.00107001 Jy ! Component: 2250 - total flux cleaned = -0.00107854 Jy ! Component: 2300 - total flux cleaned = -0.00105299 Jy ! Component: 2350 - total flux cleaned = -0.00106152 Jy ! Component: 2400 - total flux cleaned = -0.00105308 Jy ! Component: 2450 - total flux cleaned = -0.00106986 Jy ! Component: 2500 - total flux cleaned = -0.00110305 Jy ! Component: 2550 - total flux cleaned = -0.00107829 Jy ! Component: 2600 - total flux cleaned = -0.00108648 Jy ! Component: 2650 - total flux cleaned = -0.00106207 Jy ! Component: 2700 - total flux cleaned = -0.00104588 Jy ! Component: 2750 - total flux cleaned = -0.00107001 Jy ! Component: 2800 - total flux cleaned = -0.00108607 Jy ! Component: 2850 - total flux cleaned = -0.00112589 Jy ! Component: 2900 - total flux cleaned = -0.00110998 Jy ! Component: 2950 - total flux cleaned = -0.00113351 Jy ! Component: 3000 - total flux cleaned = -0.00110999 Jy ! Component: 3050 - total flux cleaned = -0.00114889 Jy ! Component: 3100 - total flux cleaned = -0.00111026 Jy ! Component: 3150 - total flux cleaned = -0.00114869 Jy ! Component: 3200 - total flux cleaned = -0.00114107 Jy ! Component: 3250 - total flux cleaned = -0.00116388 Jy ! Component: 3300 - total flux cleaned = -0.00114125 Jy ! Component: 3350 - total flux cleaned = -0.00114879 Jy ! Component: 3400 - total flux cleaned = -0.0011788 Jy ! Component: 3450 - total flux cleaned = -0.00118629 Jy ! Component: 3500 - total flux cleaned = -0.00119378 Jy ! Component: 3550 - total flux cleaned = -0.00122325 Jy ! Component: 3600 - total flux cleaned = -0.00123791 Jy ! Component: 3650 - total flux cleaned = -0.00123794 Jy ! Component: 3700 - total flux cleaned = -0.00124523 Jy ! Component: 3750 - total flux cleaned = -0.00126689 Jy ! Component: 3800 - total flux cleaned = -0.0012525 Jy ! Component: 3850 - total flux cleaned = -0.00130255 Jy ! Component: 3900 - total flux cleaned = -0.00129544 Jy ! Component: 3950 - total flux cleaned = -0.00130963 Jy ! Component: 4000 - total flux cleaned = -0.00131664 Jy ! Component: 4050 - total flux cleaned = -0.00134469 Jy ! Total flux subtracted in 4096 components = -0.00133775 Jy ! Clean residual min=-0.000415 max=0.000430 Jy/beam ! Clean residual mean=0.000000 rms=0.000122 Jy/beam ! Combined flux in latest and established models = 0.220783 Jy keep ! Adding 314 model components to the UV plane model. ! The established model now contains 634 components and 0.220783 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uvm//J2325-0344_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8792 x 2.042 at -1.447 degrees (North through East) ! Clean map min=-0.0011852 max=0.10721 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uvm//J2325-0344_X_a_map.fits wmodel /image_prod/ug002_uvm//J2325-0344_X_a_map.mod ! Writing 634 model components to file: /image_prod/ug002_uvm//J2325-0344_X_a_map.mod wobs /image_prod/ug002_uvm//J2325-0344_X_a_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uvm//J2325-0344_X_a_uvs.fits wwins /image_prod/ug002_uvm//J2325-0344_X_a_map.win ! wwins: Wrote 12 windows to /image_prod/ug002_uvm//J2325-0344_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.107205 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000121731 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.340647 0.340647 0.681293 1.36259 2.72517 5.45035 10.9007 21.8014 43.6028 87.2056 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.107 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 880.677 quit ! Quitting program ! Log file /image_prod/ug002_uvm//J2325-0344_X_a_dfm.log closed on Wed Mar 4 17:47:55 2020