! Started logfile: /image_prod/ug002_uvm//J2152+1734_X_a_dfm.log on Wed Mar 4 17:43:35 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uvm//J2152+1734_X_a_uvm.fits ! Reading UV FITS file: /image_prod/ug002_uvm//J2152+1734_X_a_uvm.fits ! AN table 1: 12 integrations on 36 of 36 possible baselines. ! AN table 2: 18 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.886752 visibilities/baseline/integration-bin. ! Found source: J2152+1734 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 121 lines of history. ! ! Reading 9960 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J2152+1734_X_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 8 telescope corrections were flagged in sub-array 1. ! A total of 7 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 8 telescope corrections were flagged in sub-array 1. ! A total of 7 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 8 telescope corrections were flagged in sub-array 1. ! A total of 7 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 8 telescope corrections were flagged in sub-array 1. ! A total of 7 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 8 telescope corrections were flagged in sub-array 1. ! A total of 7 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 8 telescope corrections were flagged in sub-array 1. ! A total of 7 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 8 telescope corrections were flagged in sub-array 1. ! A total of 7 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 8 telescope corrections were flagged in sub-array 1. ! A total of 7 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 9. ! A total of 8 telescope corrections were flagged in sub-array 1. ! A total of 7 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 10. ! A total of 8 telescope corrections were flagged in sub-array 1. ! A total of 7 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 11. ! A total of 8 telescope corrections were flagged in sub-array 1. ! A total of 7 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 12. ! A total of 8 telescope corrections were flagged in sub-array 1. ! A total of 7 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.058207Jy sigma=11.987799 ! Fit after self-cal, rms=0.672515Jy sigma=7.608158 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7342 mas, bmaj=1.687 mas, bpa=-17.49 degrees ! Estimated noise=1.06509 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.240672 Jy ! Component: 100 - total flux cleaned = 0.308199 Jy ! Total flux subtracted in 100 components = 0.308199 Jy ! Clean residual min=-0.012940 max=0.030097 Jy/beam ! Clean residual mean=-0.000001 rms=0.003447 Jy/beam ! Combined flux in latest and established models = 0.308199 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.308199 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.136241Jy sigma=1.193228 ! Fit after self-cal, rms=0.136218Jy sigma=1.192840 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0328424 Jy ! Component: 100 - total flux cleaned = 0.0493969 Jy ! Total flux subtracted in 100 components = 0.0493969 Jy ! Clean residual min=-0.012059 max=0.027180 Jy/beam ! Clean residual mean=0.000004 rms=0.002925 Jy/beam ! Combined flux in latest and established models = 0.357596 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 10 components and 0.357596 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.122269Jy sigma=1.017749 ! Fit after self-cal, rms=0.122256Jy sigma=1.017364 ! Inverting map ! Added new window around map position (-3.8, 0.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.023739 Jy ! Component: 100 - total flux cleaned = 0.0366201 Jy ! Total flux subtracted in 100 components = 0.0366201 Jy ! Clean residual min=-0.012811 max=0.017898 Jy/beam ! Clean residual mean=0.000001 rms=0.002602 Jy/beam ! Combined flux in latest and established models = 0.394216 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 17 components and 0.394216 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.114354Jy sigma=0.918528 ! Fit after self-cal, rms=0.113979Jy sigma=0.912649 ! Inverting map ! Added new window around map position (-7, 10.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0155753 Jy ! Component: 100 - total flux cleaned = 0.0213505 Jy ! Total flux subtracted in 100 components = 0.0213505 Jy ! Clean residual min=-0.011749 max=0.017806 Jy/beam ! Clean residual mean=0.000003 rms=0.002429 Jy/beam ! Combined flux in latest and established models = 0.415566 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 24 components and 0.415566 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.110972Jy sigma=0.884852 ! Fit after self-cal, rms=0.110779Jy sigma=0.880917 ! Inverting map ! Added new window around map position (7.2, -10.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0111102 Jy ! Component: 100 - total flux cleaned = 0.0111721 Jy ! Total flux subtracted in 100 components = 0.0111721 Jy ! Clean residual min=-0.010983 max=0.015056 Jy/beam ! Clean residual mean=0.000005 rms=0.002296 Jy/beam ! Combined flux in latest and established models = 0.426739 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 31 components and 0.426739 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.109072Jy sigma=0.869193 ! Fit after self-cal, rms=0.109050Jy sigma=0.868543 ! Inverting map ! Added new window around map position (-2, -1.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0117528 Jy ! Component: 100 - total flux cleaned = 0.0158408 Jy ! Total flux subtracted in 100 components = 0.0158408 Jy ! Clean residual min=-0.010456 max=0.011986 Jy/beam ! Clean residual mean=0.000005 rms=0.002170 Jy/beam ! Combined flux in latest and established models = 0.442579 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 41 components and 0.442579 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.107008Jy sigma=0.838680 ! Fit after self-cal, rms=0.106920Jy sigma=0.837511 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.969 mas, bmaj=1.988 mas, bpa=-16.19 degrees ! Estimated noise=0.675469 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0110947 Jy ! Component: 100 - total flux cleaned = 0.0192503 Jy ! Component: 150 - total flux cleaned = 0.0253016 Jy ! Component: 200 - total flux cleaned = 0.0283926 Jy ! Total flux subtracted in 200 components = 0.0283926 Jy ! Clean residual min=-0.010185 max=0.013199 Jy/beam ! Clean residual mean=0.000007 rms=0.002146 Jy/beam ! Combined flux in latest and established models = 0.470972 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 54 components and 0.470972 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.104518Jy sigma=0.815828 ! Fit after self-cal, rms=0.104425Jy sigma=0.814910 ! Inverting map ! Added new window around map position (-8.6, 2.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.010458 Jy ! Component: 100 - total flux cleaned = 0.0161095 Jy ! Component: 150 - total flux cleaned = 0.0196461 Jy ! Component: 200 - total flux cleaned = 0.0213131 Jy ! Total flux subtracted in 200 components = 0.0213131 Jy ! Clean residual min=-0.009571 max=0.010509 Jy/beam ! Clean residual mean=0.000009 rms=0.001922 Jy/beam ! Combined flux in latest and established models = 0.492285 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 72 components and 0.492285 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.102402Jy sigma=0.799424 ! Fit after self-cal, rms=0.102313Jy sigma=0.797985 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.969 x 1.988 at -16.19 degrees (North through East) ! Clean map min=-0.0084372 max=0.32527 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.00 HN 0.95 KP 1.02 ! LA 1.01 MK 1.04 NL 1.05 OV 0.98 ! PT 0.91 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.87 FD 1.01 KP 1.01 LA 0.99 ! MK 0.98 NL 1.12 OV 1.01 SC 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.99 HN 0.96 KP 1.00 ! LA 1.03 MK 1.01 NL 1.06 OV 0.98 ! PT 0.91 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.88 FD 1.00 KP 1.00 LA 1.00 ! MK 0.96 NL 1.12 OV 1.01 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.97 HN 0.99 KP 1.02 ! LA 1.03 MK 1.06 NL 1.08 OV 0.97 ! PT 0.93 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.88 FD 0.98 KP 1.02 LA 0.99 ! MK 0.91 NL 1.13 OV 1.02 SC 1.05 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.98 HN 0.95 KP 1.01 ! LA 1.04 MK 1.02 NL 1.06 OV 0.98 ! PT 0.91 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.88 FD 0.97 KP 1.01 LA 0.99 ! MK 0.95 NL 1.14 OV 1.03 SC 1.02 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.00 HN 0.97 KP 1.00 ! LA 1.03 MK 1.04 NL 1.05 OV 0.97 ! PT 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.90 FD 1.00 KP 1.00 LA 1.00 ! MK 0.93 NL 1.13 OV 1.03 SC 1.04 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.01 HN 0.99 KP 1.01 ! LA 1.01 MK 1.03 NL 1.05 OV 0.95 ! PT 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.88 FD 0.98 KP 1.01 LA 0.99 ! MK 0.98 NL 1.12 OV 1.01 SC 1.06 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.01 HN 0.98 KP 1.01 ! LA 1.04 MK 1.04 NL 1.04 OV 0.98 ! PT 0.91 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.91 FD 1.01 KP 1.00 LA 0.99 ! MK 0.95 NL 1.14 OV 1.02 SC 1.05 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.01 HN 0.99 KP 0.98 ! LA 1.03 MK 1.00 NL 1.04 OV 0.97 ! PT 0.95 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.89 FD 0.99 KP 1.02 LA 0.98 ! MK 0.94 NL 1.13 OV 1.00 SC 1.04 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.02 HN 0.96 KP 0.98 ! LA 1.03 MK 0.93 NL 1.07 OV 0.97 ! PT 0.93 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.91 FD 0.99 KP 1.00 LA 0.99 ! MK 0.93 NL 1.14 OV 1.01 SC 1.02 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.01 HN 0.97 KP 0.99 ! LA 1.03 MK 1.00 NL 1.06 OV 0.96 ! PT 0.92 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.91 FD 0.99 KP 1.01 LA 0.99 ! MK 0.96 NL 1.14 OV 1.01 SC 1.00 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.02 HN 0.99 KP 0.99 ! LA 1.04 MK 0.92 NL 1.02 OV 0.96 ! PT 0.91 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.91 FD 0.99 KP 1.01 LA 1.00 ! MK 0.94 NL 1.10 OV 1.02 SC 1.02 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.04 HN 0.94 KP 0.99 ! LA 1.06 MK 0.92 NL 1.03 OV 0.98 ! PT 0.90 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.88 FD 0.99 KP 1.00 LA 1.02 ! MK 0.97 NL 1.11 OV 1.04 SC 1.00 ! ! ! Fit before self-cal, rms=0.102313Jy sigma=0.797985 ! Fit after self-cal, rms=0.090918Jy sigma=0.755142 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9662 mas, bmaj=1.989 mas, bpa=-16.38 degrees ! Estimated noise=0.676191 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.8, 14.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00627537 Jy ! Component: 100 - total flux cleaned = 0.005696 Jy ! Component: 150 - total flux cleaned = 0.00427902 Jy ! Component: 200 - total flux cleaned = 0.00284262 Jy ! Total flux subtracted in 200 components = 0.00284262 Jy ! Clean residual min=-0.007187 max=0.007940 Jy/beam ! Clean residual mean=0.000002 rms=0.001496 Jy/beam ! Combined flux in latest and established models = 0.495128 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 90 components and 0.495128 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.089339Jy sigma=0.747736 ! Fit after self-cal, rms=0.089288Jy sigma=0.746604 ! Inverting map ! Added new window around map position (-22.8, 15.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00366734 Jy ! Component: 100 - total flux cleaned = 0.00548724 Jy ! Component: 150 - total flux cleaned = 0.00533171 Jy ! Component: 200 - total flux cleaned = 0.00462479 Jy ! Total flux subtracted in 200 components = 0.00462479 Jy ! Clean residual min=-0.006373 max=0.006327 Jy/beam ! Clean residual mean=0.000002 rms=0.001421 Jy/beam ! Combined flux in latest and established models = 0.499752 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 106 components and 0.499753 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.088103Jy sigma=0.738581 ! Fit after self-cal, rms=0.088046Jy sigma=0.737427 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.088046Jy sigma=0.737427 ! Fit after self-cal, rms=0.068347Jy sigma=0.647394 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9803 mas, bmaj=1.99 mas, bpa=-16.19 degrees ! Estimated noise=0.684243 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00170582 Jy ! Component: 100 - total flux cleaned = -0.00226054 Jy ! Component: 150 - total flux cleaned = -0.00308075 Jy ! Component: 200 - total flux cleaned = -0.00359988 Jy ! Total flux subtracted in 200 components = -0.00359988 Jy ! Clean residual min=-0.003902 max=0.003584 Jy/beam ! Clean residual mean=0.000002 rms=0.000807 Jy/beam ! Combined flux in latest and established models = 0.496153 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 120 components and 0.496153 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067839Jy sigma=0.642138 ! Fit after self-cal, rms=0.067828Jy sigma=0.641809 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000552056 Jy ! Component: 100 - total flux cleaned = -0.000905269 Jy ! Component: 150 - total flux cleaned = -0.00115 Jy ! Component: 200 - total flux cleaned = -0.00145469 Jy ! Total flux subtracted in 200 components = -0.00145469 Jy ! Clean residual min=-0.003613 max=0.003398 Jy/beam ! Clean residual mean=0.000002 rms=0.000769 Jy/beam ! Combined flux in latest and established models = 0.494698 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 134 components and 0.494698 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067618Jy sigma=0.639515 ! Fit after self-cal, rms=0.067606Jy sigma=0.639441 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067606Jy sigma=0.639441 ! Fit after self-cal, rms=0.067903Jy sigma=0.638430 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9832 mas, bmaj=1.991 mas, bpa=-16.18 degrees ! Estimated noise=0.684391 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00283956 Jy ! Component: 100 - total flux cleaned = -0.00345413 Jy ! Component: 150 - total flux cleaned = -0.00392923 Jy ! Component: 200 - total flux cleaned = -0.00378685 Jy ! Total flux subtracted in 200 components = -0.00378685 Jy ! Clean residual min=-0.003287 max=0.003293 Jy/beam ! Clean residual mean=0.000001 rms=0.000709 Jy/beam ! Combined flux in latest and established models = 0.490911 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 143 components and 0.490911 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067676Jy sigma=0.635908 ! Fit after self-cal, rms=0.067665Jy sigma=0.635831 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00037683 Jy ! Component: 100 - total flux cleaned = -0.00044281 Jy ! Component: 150 - total flux cleaned = -0.00037956 Jy ! Component: 200 - total flux cleaned = -0.000320948 Jy ! Total flux subtracted in 200 components = -0.000320948 Jy ! Clean residual min=-0.003201 max=0.003173 Jy/beam ! Clean residual mean=0.000001 rms=0.000688 Jy/beam ! Combined flux in latest and established models = 0.49059 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 155 components and 0.49059 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067540Jy sigma=0.634575 ! Fit after self-cal, rms=0.067534Jy sigma=0.634541 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067534Jy sigma=0.634541 ! Fit after self-cal, rms=0.067781Jy sigma=0.633979 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.366 mas, bmaj=2.878 mas, bpa=-14.84 degrees ! Estimated noise=0.785188 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000252035 Jy ! Component: 100 - total flux cleaned = 0.000130099 Jy ! Component: 150 - total flux cleaned = 0.00018013 Jy ! Component: 200 - total flux cleaned = 0.000274858 Jy ! Total flux subtracted in 200 components = 0.000274858 Jy ! Clean residual min=-0.002649 max=0.003269 Jy/beam ! Clean residual mean=0.000004 rms=0.000804 Jy/beam ! Combined flux in latest and established models = 0.490865 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 173 components and 0.490865 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067729Jy sigma=0.633326 ! Fit after self-cal, rms=0.067715Jy sigma=0.633241 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.66594e-05 Jy ! Component: 100 - total flux cleaned = -0.000300402 Jy ! Component: 150 - total flux cleaned = -0.000539861 Jy ! Component: 200 - total flux cleaned = -0.00065098 Jy ! Total flux subtracted in 200 components = -0.00065098 Jy ! Clean residual min=-0.002520 max=0.003157 Jy/beam ! Clean residual mean=0.000003 rms=0.000777 Jy/beam ! Combined flux in latest and established models = 0.490214 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 191 components and 0.490214 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067690Jy sigma=0.632837 ! Fit after self-cal, rms=0.067679Jy sigma=0.632787 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9852 mas, bmaj=1.991 mas, bpa=-16.17 degrees ! Estimated noise=0.684449 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9852 x 1.991 at -16.17 degrees (North through East) ! Clean map min=-0.0028769 max=0.32788 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7424 mas, bmaj=1.687 mas, bpa=-17.58 degrees ! Estimated noise=1.08458 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.244777 Jy ! Component: 100 - total flux cleaned = 0.311274 Jy ! Component: 150 - total flux cleaned = 0.34581 Jy ! Component: 200 - total flux cleaned = 0.368608 Jy ! Total flux subtracted in 200 components = 0.368608 Jy ! Clean residual min=-0.007774 max=0.013506 Jy/beam ! Clean residual mean=-0.000000 rms=0.001820 Jy/beam ! Combined flux in latest and established models = 0.368608 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.368608 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9852 mas, bmaj=1.991 mas, bpa=-16.17 degrees ! Estimated noise=0.684449 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0282303 Jy ! Component: 100 - total flux cleaned = 0.0468779 Jy ! Component: 150 - total flux cleaned = 0.0599247 Jy ! Component: 200 - total flux cleaned = 0.069906 Jy ! Total flux subtracted in 200 components = 0.069906 Jy ! Clean residual min=-0.004747 max=0.007635 Jy/beam ! Clean residual mean=-0.000001 rms=0.001390 Jy/beam ! Combined flux in latest and established models = 0.438514 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 45 components and 0.438514 Jy ! Inverting map ! Added new window around map position (-1, 0.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00842466 Jy ! Component: 100 - total flux cleaned = 0.0152791 Jy ! Component: 150 - total flux cleaned = 0.0211308 Jy ! Component: 200 - total flux cleaned = 0.0261492 Jy ! Total flux subtracted in 200 components = 0.0261492 Jy ! Clean residual min=-0.003688 max=0.004020 Jy/beam ! Clean residual mean=0.000000 rms=0.000957 Jy/beam ! Combined flux in latest and established models = 0.464664 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 66 components and 0.464664 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.366 mas, bmaj=2.878 mas, bpa=-14.84 degrees ! Estimated noise=0.785188 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00623807 Jy ! Component: 100 - total flux cleaned = 0.010062 Jy ! Component: 150 - total flux cleaned = 0.0118654 Jy ! Component: 200 - total flux cleaned = 0.0131481 Jy ! Total flux subtracted in 200 components = 0.0131481 Jy ! Clean residual min=-0.003260 max=0.003737 Jy/beam ! Clean residual mean=-0.000001 rms=0.000957 Jy/beam ! Combined flux in latest and established models = 0.477812 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00102996 Jy ! Component: 100 - total flux cleaned = 0.00203739 Jy ! Component: 150 - total flux cleaned = 0.00302063 Jy ! Component: 200 - total flux cleaned = 0.00391685 Jy ! Total flux subtracted in 200 components = 0.00391685 Jy ! Clean residual min=-0.002974 max=0.003543 Jy/beam ! Clean residual mean=0.000000 rms=0.000863 Jy/beam ! Combined flux in latest and established models = 0.481729 Jy ! Adding 62 model components to the UV plane model. ! The established model now contains 112 components and 0.481729 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9852 mas, bmaj=1.991 mas, bpa=-16.17 degrees ! Estimated noise=0.684449 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00141936 Jy ! Component: 100 - total flux cleaned = 0.0019328 Jy ! Component: 150 - total flux cleaned = 0.0023007 Jy ! Component: 200 - total flux cleaned = 0.00272611 Jy ! Total flux subtracted in 200 components = 0.00272611 Jy ! Clean residual min=-0.002875 max=0.002891 Jy/beam ! Clean residual mean=0.000001 rms=0.000664 Jy/beam ! Combined flux in latest and established models = 0.484455 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 139 components and 0.484455 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067912Jy sigma=0.633012 ! Fit after self-cal, rms=0.067798Jy sigma=0.632238 wmodel J2152+1734_X_a_map.mod ! Writing 139 model components to file: J2152+1734_X_a_map.mod wobs J2152+1734_X_a_uvs.fits ! Writing UV FITS file: J2152+1734_X_a_uvs.fits wwins J2152+1734_X_a_map.win ! wwins: Wrote 9 windows to J2152+1734_X_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00055889 Jy ! Component: 100 - total flux cleaned = -0.000251046 Jy ! Component: 150 - total flux cleaned = 0.000277223 Jy ! Component: 200 - total flux cleaned = 0.000782988 Jy ! Component: 250 - total flux cleaned = 0.00118285 Jy ! Component: 300 - total flux cleaned = 0.00135549 Jy ! Component: 350 - total flux cleaned = 0.0016915 Jy ! Component: 400 - total flux cleaned = 0.00197696 Jy ! Component: 450 - total flux cleaned = 0.00217663 Jy ! Component: 500 - total flux cleaned = 0.00249007 Jy ! Component: 550 - total flux cleaned = 0.0027592 Jy ! Component: 600 - total flux cleaned = 0.003209 Jy ! Component: 650 - total flux cleaned = 0.00342867 Jy ! Component: 700 - total flux cleaned = 0.00368098 Jy ! Component: 750 - total flux cleaned = 0.00392744 Jy ! Component: 800 - total flux cleaned = 0.00410051 Jy ! Component: 850 - total flux cleaned = 0.00427099 Jy ! Component: 900 - total flux cleaned = 0.00440559 Jy ! Component: 950 - total flux cleaned = 0.00453912 Jy ! Component: 1000 - total flux cleaned = 0.00470291 Jy ! Component: 1050 - total flux cleaned = 0.00480025 Jy ! Component: 1100 - total flux cleaned = 0.00518038 Jy ! Component: 1150 - total flux cleaned = 0.00524206 Jy ! Component: 1200 - total flux cleaned = 0.00539635 Jy ! Component: 1250 - total flux cleaned = 0.00551791 Jy ! Component: 1300 - total flux cleaned = 0.00569791 Jy ! Component: 1350 - total flux cleaned = 0.00584593 Jy ! Component: 1400 - total flux cleaned = 0.00605006 Jy ! Component: 1450 - total flux cleaned = 0.00610723 Jy ! Component: 1500 - total flux cleaned = 0.00610721 Jy ! Component: 1550 - total flux cleaned = 0.00619206 Jy ! Component: 1600 - total flux cleaned = 0.00624777 Jy ! Component: 1650 - total flux cleaned = 0.00619336 Jy ! Component: 1700 - total flux cleaned = 0.00638398 Jy ! Component: 1750 - total flux cleaned = 0.00649145 Jy ! Component: 1800 - total flux cleaned = 0.00651765 Jy ! Component: 1850 - total flux cleaned = 0.00664974 Jy ! Component: 1900 - total flux cleaned = 0.006571 Jy ! Component: 1950 - total flux cleaned = 0.00677859 Jy ! Component: 2000 - total flux cleaned = 0.00670158 Jy ! Component: 2050 - total flux cleaned = 0.00682913 Jy ! Component: 2100 - total flux cleaned = 0.006905 Jy ! Component: 2150 - total flux cleaned = 0.00695463 Jy ! Component: 2200 - total flux cleaned = 0.00692995 Jy ! Component: 2250 - total flux cleaned = 0.00697904 Jy ! Component: 2300 - total flux cleaned = 0.00705218 Jy ! Component: 2350 - total flux cleaned = 0.00717263 Jy ! Component: 2400 - total flux cleaned = 0.00722058 Jy ! Component: 2450 - total flux cleaned = 0.00714934 Jy ! Component: 2500 - total flux cleaned = 0.00729096 Jy ! Component: 2550 - total flux cleaned = 0.00729096 Jy ! Component: 2600 - total flux cleaned = 0.00729086 Jy ! Component: 2650 - total flux cleaned = 0.00738299 Jy ! Component: 2700 - total flux cleaned = 0.00729125 Jy ! Component: 2750 - total flux cleaned = 0.00729118 Jy ! Component: 2800 - total flux cleaned = 0.00738134 Jy ! Component: 2850 - total flux cleaned = 0.00729179 Jy ! Component: 2900 - total flux cleaned = 0.00735881 Jy ! Component: 2950 - total flux cleaned = 0.0072704 Jy ! Component: 3000 - total flux cleaned = 0.00735819 Jy ! Component: 3050 - total flux cleaned = 0.00731453 Jy ! Component: 3100 - total flux cleaned = 0.00735772 Jy ! Component: 3150 - total flux cleaned = 0.00725016 Jy ! Component: 3200 - total flux cleaned = 0.0072505 Jy ! Component: 3250 - total flux cleaned = 0.00729292 Jy ! Component: 3300 - total flux cleaned = 0.00727186 Jy ! Component: 3350 - total flux cleaned = 0.00731422 Jy ! Component: 3400 - total flux cleaned = 0.007251 Jy ! Component: 3450 - total flux cleaned = 0.00729252 Jy ! Component: 3500 - total flux cleaned = 0.00727165 Jy ! Component: 3550 - total flux cleaned = 0.00725109 Jy ! Component: 3600 - total flux cleaned = 0.00729183 Jy ! Component: 3650 - total flux cleaned = 0.00729162 Jy ! Component: 3700 - total flux cleaned = 0.00723114 Jy ! Component: 3750 - total flux cleaned = 0.00721098 Jy ! Component: 3800 - total flux cleaned = 0.00723104 Jy ! Component: 3850 - total flux cleaned = 0.00721155 Jy ! Component: 3900 - total flux cleaned = 0.00725099 Jy ! Component: 3950 - total flux cleaned = 0.00725098 Jy ! Component: 4000 - total flux cleaned = 0.00723142 Jy ! Component: 4050 - total flux cleaned = 0.00725083 Jy ! Total flux subtracted in 4096 components = 0.00721218 Jy ! Clean residual min=-0.001056 max=0.001004 Jy/beam ! Clean residual mean=0.000002 rms=0.000334 Jy/beam ! Combined flux in latest and established models = 0.491667 Jy keep ! Adding 300 model components to the UV plane model. ! The established model now contains 435 components and 0.491667 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uvm//J2152+1734_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9852 x 1.991 at -16.17 degrees (North through East) ! Clean map min=-0.0023427 max=0.33098 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uvm//J2152+1734_X_a_map.fits wmodel /image_prod/ug002_uvm//J2152+1734_X_a_map.mod ! Writing 435 model components to file: /image_prod/ug002_uvm//J2152+1734_X_a_map.mod wobs /image_prod/ug002_uvm//J2152+1734_X_a_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uvm//J2152+1734_X_a_uvs.fits wwins /image_prod/ug002_uvm//J2152+1734_X_a_map.win ! wwins: Wrote 10 windows to /image_prod/ug002_uvm//J2152+1734_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.330979 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000333462 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.30225 0.30225 0.6045 1.209 2.418 4.836 9.672 19.344 38.688 77.376 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.33 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 992.555 quit ! Quitting program ! Log file /image_prod/ug002_uvm//J2152+1734_X_a_dfm.log closed on Wed Mar 4 17:43:40 2020