! Started logfile: /image_prod/ug002_uvm//J2134-0153_X_a_dfm.log on Wed Mar 4 17:43:21 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uvm//J2134-0153_X_a_uvm.fits ! Reading UV FITS file: /image_prod/ug002_uvm//J2134-0153_X_a_uvm.fits ! AN table 1: 36 integrations on 45 of 45 possible baselines. ! AN table 2: 8 integrations on 6 of 6 possible baselines. ! AN table 3: 5 integrations on 15 of 15 possible baselines. ! Apparent sampling: 0.761905 visibilities/baseline/integration-bin. ! Found source: J2134-0153 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 15936 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J2134-0153_X_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 60 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 60 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 60 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 60 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 60 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 60 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 60 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 60 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 9. ! A total of 60 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 10. ! A total of 60 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 11. ! A total of 60 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 12. ! A total of 60 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.739822Jy sigma=8.517109 ! Fit after self-cal, rms=0.548363Jy sigma=2.357446 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6334 mas, bmaj=1.621 mas, bpa=0.3035 degrees ! Estimated noise=1.65083 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.956479 Jy ! Component: 100 - total flux cleaned = 1.20479 Jy ! Total flux subtracted in 100 components = 1.20479 Jy ! Clean residual min=-0.071234 max=0.163898 Jy/beam ! Clean residual mean=0.000020 rms=0.010769 Jy/beam ! Combined flux in latest and established models = 1.20479 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 1.20479 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.428255Jy sigma=1.805869 ! Fit after self-cal, rms=0.427685Jy sigma=1.804819 ! Inverting map ! Added new window around map position (2.4, -0.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.159446 Jy ! Component: 100 - total flux cleaned = 0.257464 Jy ! Total flux subtracted in 100 components = 0.257464 Jy ! Clean residual min=-0.047600 max=0.087497 Jy/beam ! Clean residual mean=0.000020 rms=0.007649 Jy/beam ! Combined flux in latest and established models = 1.46226 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 10 components and 1.46226 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.308710Jy sigma=1.302170 ! Fit after self-cal, rms=0.305786Jy sigma=1.286016 ! Inverting map ! Added new window around map position (0.8, -0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0893233 Jy ! Component: 100 - total flux cleaned = 0.151027 Jy ! Total flux subtracted in 100 components = 0.151027 Jy ! Clean residual min=-0.035471 max=0.045408 Jy/beam ! Clean residual mean=0.000021 rms=0.006200 Jy/beam ! Combined flux in latest and established models = 1.61328 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 17 components and 1.61328 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.244056Jy sigma=1.035479 ! Fit after self-cal, rms=0.242971Jy sigma=1.028147 ! Inverting map ! Added new window around map position (1.6, 0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0522188 Jy ! Component: 100 - total flux cleaned = 0.0922049 Jy ! Total flux subtracted in 100 components = 0.0922049 Jy ! Clean residual min=-0.028607 max=0.041615 Jy/beam ! Clean residual mean=0.000021 rms=0.005516 Jy/beam ! Combined flux in latest and established models = 1.70549 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 24 components and 1.70549 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.213161Jy sigma=0.909306 ! Fit after self-cal, rms=0.212737Jy sigma=0.905844 ! Inverting map ! Added new window around map position (-2.6, -2.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0399033 Jy ! Component: 100 - total flux cleaned = 0.0709092 Jy ! Total flux subtracted in 100 components = 0.0709092 Jy ! Clean residual min=-0.027461 max=0.029900 Jy/beam ! Clean residual mean=0.000020 rms=0.005060 Jy/beam ! Combined flux in latest and established models = 1.7764 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 35 components and 1.7764 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.196219Jy sigma=0.833811 ! Fit after self-cal, rms=0.195719Jy sigma=0.831859 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7868 mas, bmaj=1.863 mas, bpa=0.5824 degrees ! Estimated noise=1.17098 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0513147 Jy ! Component: 100 - total flux cleaned = 0.0881166 Jy ! Component: 150 - total flux cleaned = 0.116773 Jy ! Component: 200 - total flux cleaned = 0.139798 Jy ! Total flux subtracted in 200 components = 0.139798 Jy ! Clean residual min=-0.026443 max=0.031390 Jy/beam ! Clean residual mean=0.000054 rms=0.005465 Jy/beam ! Combined flux in latest and established models = 1.91619 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 60 components and 1.91619 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.170105Jy sigma=0.741632 ! Fit after self-cal, rms=0.169706Jy sigma=0.738611 ! Inverting map ! Added new window around map position (4.6, 0.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0287706 Jy ! Component: 100 - total flux cleaned = 0.0485717 Jy ! Component: 150 - total flux cleaned = 0.0651277 Jy ! Component: 200 - total flux cleaned = 0.0794323 Jy ! Total flux subtracted in 200 components = 0.0794323 Jy ! Clean residual min=-0.023475 max=0.021169 Jy/beam ! Clean residual mean=0.000046 rms=0.004910 Jy/beam ! Combined flux in latest and established models = 1.99563 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 78 components and 1.99563 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.160327Jy sigma=0.707360 ! Fit after self-cal, rms=0.160167Jy sigma=0.705646 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7868 x 1.863 at 0.5824 degrees (North through East) ! Clean map min=-0.022195 max=1.3205 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.02 HN 0.99 KP 1.08 ! LA 1.01 MK 1.03 NL 1.09 OV 0.96 ! PT 0.91 SC 1.04 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 HN 1.05 NL 1.06 SC 0.91 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.97 FD 0.96 HN 1.02 KP 1.02 ! NL 1.07 OV 0.92 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.01 HN 0.97 KP 1.06 ! LA 1.01 MK 1.00 NL 1.10 OV 0.96 ! PT 0.93 SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 HN 1.05 NL 1.05 SC 0.94 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.97 FD 0.99 HN 1.05 KP 1.01 ! NL 1.11 OV 0.93 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.01 HN 0.99 KP 1.06 ! LA 1.00 MK 1.02 NL 1.07 OV 0.96 ! PT 0.92 SC 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 HN 1.04 NL 1.06 SC 0.93 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.96 FD 1.00 HN 1.06 KP 1.04 ! NL 1.08 OV 0.92 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.03 HN 0.99 KP 1.05 ! LA 1.03 MK 1.02 NL 1.06 OV 0.95 ! PT 0.91 SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 HN 1.02 NL 1.07 SC 0.93 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.97 FD 0.97 HN 1.06 KP 1.03 ! NL 1.07 OV 0.92 ! ! ! Correcting IF 5. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.03 HN 0.97 KP 1.06 ! LA 1.00 MK 1.00 NL 1.08 OV 0.96 ! PT 0.91 SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 HN 1.05 NL 1.04 SC 0.91 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.96 FD 0.97 HN 1.04 KP 1.03 ! NL 1.07 OV 0.94 ! ! ! Correcting IF 6. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.01 HN 0.95 KP 1.05 ! LA 0.99 MK 1.00 NL 1.09 OV 0.97 ! PT 0.91 SC 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 HN 1.03 NL 1.05 SC 0.94 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.97 FD 1.00 HN 1.05 KP 1.03 ! NL 1.08 OV 0.93 ! ! ! Correcting IF 7. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.01 HN 0.96 KP 1.04 ! LA 0.99 MK 1.03 NL 1.09 OV 0.95 ! PT 0.90 SC 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 HN 1.05 NL 1.04 SC 0.89 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.96 FD 0.99 HN 1.05 KP 1.01 ! NL 1.06 OV 0.93 ! ! ! Correcting IF 8. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.01 HN 0.96 KP 1.07 ! LA 1.01 MK 1.01 NL 1.06 OV 0.97 ! PT 0.91 SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 HN 1.02 NL 1.06 SC 0.90 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.96 FD 0.94 HN 1.07 KP 1.05 ! NL 1.08 OV 0.95 ! ! ! Correcting IF 9. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.01 HN 0.97 KP 1.04 ! LA 1.00 MK 0.99 NL 1.06 OV 0.94 ! PT 0.92 SC 1.06 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 HN 1.03 NL 1.05 SC 0.90 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 0.99 HN 1.07 KP 1.01 ! NL 1.09 OV 0.90 ! ! ! Correcting IF 10. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.04 HN 0.96 KP 1.05 ! LA 1.00 MK 1.02 NL 1.08 OV 0.95 ! PT 0.92 SC 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 HN 1.04 NL 1.05 SC 0.91 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 0.98 HN 1.05 KP 1.03 ! NL 1.10 OV 0.91 ! ! ! Correcting IF 11. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00 HN 0.96 KP 1.04 ! LA 1.01 MK 0.99 NL 1.05 OV 0.95 ! PT 0.93 SC 1.06 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 HN 1.03 NL 1.02 SC 0.92 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.01 FD 1.00 HN 1.04 KP 1.01 ! NL 1.09 OV 0.94 ! ! ! Correcting IF 12. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.99 HN 0.98 KP 1.06 ! LA 1.00 MK 1.02 NL 1.08 OV 0.95 ! PT 0.90 SC 1.04 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.04 HN 1.03 NL 1.05 SC 0.91 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 0.96 HN 1.10 KP 0.98 ! NL 1.08 OV 0.94 ! ! ! Fit before self-cal, rms=0.160167Jy sigma=0.705646 ! Fit after self-cal, rms=0.126616Jy sigma=0.554652 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7937 mas, bmaj=1.863 mas, bpa=0.5565 degrees ! Estimated noise=1.17136 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000292336 Jy ! Component: 100 - total flux cleaned = 0.000837437 Jy ! Component: 150 - total flux cleaned = 0.00127525 Jy ! Component: 200 - total flux cleaned = 0.00166911 Jy ! Total flux subtracted in 200 components = 0.00166911 Jy ! Clean residual min=-0.016763 max=0.014578 Jy/beam ! Clean residual mean=0.000017 rms=0.002878 Jy/beam ! Combined flux in latest and established models = 1.9973 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 101 components and 1.9973 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.121984Jy sigma=0.538575 ! Fit after self-cal, rms=0.121826Jy sigma=0.537455 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.121826Jy sigma=0.537455 ! Fit after self-cal, rms=0.092687Jy sigma=0.422651 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7942 mas, bmaj=1.864 mas, bpa=0.5532 degrees ! Estimated noise=1.17225 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0066132 Jy ! Component: 100 - total flux cleaned = -0.00456179 Jy ! Component: 150 - total flux cleaned = -0.00185146 Jy ! Component: 200 - total flux cleaned = 0.00102905 Jy ! Total flux subtracted in 200 components = 0.00102905 Jy ! Clean residual min=-0.011653 max=0.009249 Jy/beam ! Clean residual mean=0.000005 rms=0.002014 Jy/beam ! Combined flux in latest and established models = 1.99832 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 114 components and 1.99832 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.089915Jy sigma=0.411075 ! Fit after self-cal, rms=0.089798Jy sigma=0.410377 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00116745 Jy ! Component: 100 - total flux cleaned = 0.003379 Jy ! Component: 150 - total flux cleaned = 0.00476657 Jy ! Component: 200 - total flux cleaned = 0.00566641 Jy ! Total flux subtracted in 200 components = 0.00566641 Jy ! Clean residual min=-0.009979 max=0.008873 Jy/beam ! Clean residual mean=0.000004 rms=0.001940 Jy/beam ! Combined flux in latest and established models = 2.00399 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 121 components and 2.00399 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.088700Jy sigma=0.406682 ! Fit after self-cal, rms=0.088674Jy sigma=0.406516 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.088674Jy sigma=0.406516 ! Fit after self-cal, rms=0.074116Jy sigma=0.353549 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7935 mas, bmaj=1.863 mas, bpa=0.5893 degrees ! Estimated noise=1.1698 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00137453 Jy ! Component: 100 - total flux cleaned = -0.00140841 Jy ! Component: 150 - total flux cleaned = -0.00117984 Jy ! Component: 200 - total flux cleaned = -0.00118326 Jy ! Total flux subtracted in 200 components = -0.00118326 Jy ! Clean residual min=-0.009499 max=0.006064 Jy/beam ! Clean residual mean=0.000003 rms=0.001392 Jy/beam ! Combined flux in latest and established models = 2.00281 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 131 components and 2.00281 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072004Jy sigma=0.343921 ! Fit after self-cal, rms=0.071934Jy sigma=0.343459 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000666856 Jy ! Component: 100 - total flux cleaned = 0.000852981 Jy ! Component: 150 - total flux cleaned = 0.000848592 Jy ! Component: 200 - total flux cleaned = 0.00112622 Jy ! Total flux subtracted in 200 components = 0.00112622 Jy ! Clean residual min=-0.008396 max=0.005813 Jy/beam ! Clean residual mean=0.000003 rms=0.001336 Jy/beam ! Combined flux in latest and established models = 2.00393 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 138 components and 2.00393 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071153Jy sigma=0.340315 ! Fit after self-cal, rms=0.071133Jy sigma=0.340172 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071133Jy sigma=0.340172 ! Fit after self-cal, rms=0.070118Jy sigma=0.336935 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.94 mas, bmaj=3.194 mas, bpa=9.372 degrees ! Estimated noise=1.70751 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00145649 Jy ! Component: 100 - total flux cleaned = -0.0020444 Jy ! Component: 150 - total flux cleaned = -0.00248668 Jy ! Component: 200 - total flux cleaned = -0.00311892 Jy ! Total flux subtracted in 200 components = -0.00311892 Jy ! Clean residual min=-0.010018 max=0.007183 Jy/beam ! Clean residual mean=0.000007 rms=0.002097 Jy/beam ! Combined flux in latest and established models = 2.00081 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 152 components and 2.00081 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069511Jy sigma=0.335517 ! Fit after self-cal, rms=0.069485Jy sigma=0.335138 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000630655 Jy ! Component: 100 - total flux cleaned = -0.000847128 Jy ! Component: 150 - total flux cleaned = -0.000939789 Jy ! Component: 200 - total flux cleaned = -0.00111016 Jy ! Total flux subtracted in 200 components = -0.00111016 Jy ! Clean residual min=-0.009245 max=0.007016 Jy/beam ! Clean residual mean=0.000008 rms=0.002074 Jy/beam ! Combined flux in latest and established models = 1.9997 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 154 components and 1.9997 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069304Jy sigma=0.334712 ! Fit after self-cal, rms=0.069311Jy sigma=0.334575 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.7929 mas, bmaj=1.862 mas, bpa=0.6164 degrees ! Estimated noise=1.16794 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7929 x 1.862 at 0.6164 degrees (North through East) ! Clean map min=-0.0064858 max=1.3209 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069311Jy sigma=0.334575 ! Fit after self-cal, rms=0.065527Jy sigma=0.306990 ! Inverting map and beam ! Estimated beam: bmin=0.7931 mas, bmaj=1.862 mas, bpa=0.6318 degrees ! Estimated noise=1.16755 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00353009 Jy ! Component: 100 - total flux cleaned = -0.00370943 Jy ! Component: 150 - total flux cleaned = -0.00357772 Jy ! Component: 200 - total flux cleaned = -0.00281169 Jy ! Total flux subtracted in 200 components = -0.00281169 Jy ! Clean residual min=-0.006135 max=0.004896 Jy/beam ! Clean residual mean=0.000004 rms=0.001106 Jy/beam ! Combined flux in latest and established models = 1.99689 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 159 components and 1.99689 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064757Jy sigma=0.302481 ! Fit after self-cal, rms=0.064719Jy sigma=0.302252 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000129026 Jy ! Component: 100 - total flux cleaned = 0.000307201 Jy ! Component: 150 - total flux cleaned = 0.000610369 Jy ! Component: 200 - total flux cleaned = 0.000989701 Jy ! Total flux subtracted in 200 components = 0.000989701 Jy ! Clean residual min=-0.005489 max=0.004743 Jy/beam ! Clean residual mean=0.000004 rms=0.001074 Jy/beam ! Combined flux in latest and established models = 1.99788 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 163 components and 1.99788 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064383Jy sigma=0.300743 ! Fit after self-cal, rms=0.064376Jy sigma=0.300690 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064376Jy sigma=0.300690 ! Fit after self-cal, rms=0.063921Jy sigma=0.299329 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6353 mas, bmaj=1.622 mas, bpa=0.1749 degrees ! Estimated noise=1.6553 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.955388 Jy ! Component: 100 - total flux cleaned = 1.21628 Jy ! Component: 150 - total flux cleaned = 1.37691 Jy ! Component: 200 - total flux cleaned = 1.4835 Jy ! Total flux subtracted in 200 components = 1.4835 Jy ! Clean residual min=-0.030509 max=0.057238 Jy/beam ! Clean residual mean=0.000007 rms=0.005056 Jy/beam ! Combined flux in latest and established models = 1.4835 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 1.4835 Jy ! Inverting map and beam ! Estimated beam: bmin=0.7924 mas, bmaj=1.861 mas, bpa=0.6319 degrees ! Estimated noise=1.1664 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.122562 Jy ! Component: 100 - total flux cleaned = 0.203768 Jy ! Component: 150 - total flux cleaned = 0.261153 Jy ! Component: 200 - total flux cleaned = 0.30352 Jy ! Total flux subtracted in 200 components = 0.30352 Jy ! Clean residual min=-0.012154 max=0.024972 Jy/beam ! Clean residual mean=0.000026 rms=0.003620 Jy/beam ! Combined flux in latest and established models = 1.78702 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 47 components and 1.78702 Jy ! Inverting map ! Added new window around map position (3, -0.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0322011 Jy ! Component: 100 - total flux cleaned = 0.0572141 Jy ! Component: 150 - total flux cleaned = 0.0771526 Jy ! Component: 200 - total flux cleaned = 0.093441 Jy ! Total flux subtracted in 200 components = 0.093441 Jy ! Clean residual min=-0.008132 max=0.010477 Jy/beam ! Clean residual mean=0.000016 rms=0.002015 Jy/beam ! Combined flux in latest and established models = 1.88046 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 73 components and 1.88047 Jy ! Inverting map ! Added new window around map position (11, -12.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0138449 Jy ! Component: 100 - total flux cleaned = 0.0258326 Jy ! Component: 150 - total flux cleaned = 0.0363501 Jy ! Component: 200 - total flux cleaned = 0.0456124 Jy ! Total flux subtracted in 200 components = 0.0456124 Jy ! Clean residual min=-0.006373 max=0.006714 Jy/beam ! Clean residual mean=0.000011 rms=0.001440 Jy/beam ! Combined flux in latest and established models = 1.92608 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 106 components and 1.92608 Jy ! Inverting map ! Added new window around map position (-7.6, 11.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.008312 Jy ! Component: 100 - total flux cleaned = 0.0155934 Jy ! Component: 150 - total flux cleaned = 0.0220774 Jy ! Component: 200 - total flux cleaned = 0.0278673 Jy ! Total flux subtracted in 200 components = 0.0278673 Jy ! Clean residual min=-0.005424 max=0.005044 Jy/beam ! Clean residual mean=0.000008 rms=0.001169 Jy/beam ! Combined flux in latest and established models = 1.95394 Jy ! Adding 56 model components to the UV plane model. ! The established model now contains 137 components and 1.95394 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.94 mas, bmaj=3.192 mas, bpa=9.414 degrees ! Estimated noise=1.70665 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0111712 Jy ! Component: 100 - total flux cleaned = 0.0192132 Jy ! Component: 150 - total flux cleaned = 0.0253315 Jy ! Component: 200 - total flux cleaned = 0.0302121 Jy ! Total flux subtracted in 200 components = 0.0302121 Jy ! Clean residual min=-0.008080 max=0.005976 Jy/beam ! Clean residual mean=0.000013 rms=0.001862 Jy/beam ! Combined flux in latest and established models = 1.98416 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00378905 Jy ! Component: 100 - total flux cleaned = 0.00565601 Jy ! Component: 150 - total flux cleaned = 0.00696319 Jy ! Component: 200 - total flux cleaned = 0.00813855 Jy ! Total flux subtracted in 200 components = 0.00813855 Jy ! Clean residual min=-0.007693 max=0.005638 Jy/beam ! Clean residual mean=0.000011 rms=0.001763 Jy/beam ! Combined flux in latest and established models = 1.9923 Jy ! Adding 84 model components to the UV plane model. ! The established model now contains 200 components and 1.9923 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.7924 mas, bmaj=1.861 mas, bpa=0.6319 degrees ! Estimated noise=1.1664 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000810399 Jy ! Component: 100 - total flux cleaned = 0.00114321 Jy ! Component: 150 - total flux cleaned = 0.00164023 Jy ! Component: 200 - total flux cleaned = 0.00200179 Jy ! Total flux subtracted in 200 components = 0.00200179 Jy ! Clean residual min=-0.004567 max=0.004445 Jy/beam ! Clean residual mean=0.000004 rms=0.000926 Jy/beam ! Combined flux in latest and established models = 1.9943 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 217 components and 1.9943 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062626Jy sigma=0.294325 ! Fit after self-cal, rms=0.062405Jy sigma=0.292906 wmodel J2134-0153_X_a_map.mod ! Writing 217 model components to file: J2134-0153_X_a_map.mod wobs J2134-0153_X_a_uvs.fits ! Writing UV FITS file: J2134-0153_X_a_uvs.fits wwins J2134-0153_X_a_map.win ! wwins: Wrote 9 windows to J2134-0153_X_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 1.39467e-05 Jy ! Component: 100 - total flux cleaned = -0.000573201 Jy ! Component: 150 - total flux cleaned = -0.00119044 Jy ! Component: 200 - total flux cleaned = -0.00177104 Jy ! Component: 250 - total flux cleaned = -0.00232924 Jy ! Component: 300 - total flux cleaned = -0.00298712 Jy ! Component: 350 - total flux cleaned = -0.00362176 Jy ! Component: 400 - total flux cleaned = -0.0040697 Jy ! Component: 450 - total flux cleaned = -0.0043411 Jy ! Component: 500 - total flux cleaned = -0.00476206 Jy ! Component: 550 - total flux cleaned = -0.00501874 Jy ! Component: 600 - total flux cleaned = -0.00527057 Jy ! Component: 650 - total flux cleaned = -0.0054197 Jy ! Component: 700 - total flux cleaned = -0.00571107 Jy ! Component: 750 - total flux cleaned = -0.00604402 Jy ! Component: 800 - total flux cleaned = -0.00613675 Jy ! Component: 850 - total flux cleaned = -0.0064592 Jy ! Component: 900 - total flux cleaned = -0.0065493 Jy ! Component: 950 - total flux cleaned = -0.00663879 Jy ! Component: 1000 - total flux cleaned = -0.00681458 Jy ! Component: 1050 - total flux cleaned = -0.00698755 Jy ! Component: 1100 - total flux cleaned = -0.00698668 Jy ! Component: 1150 - total flux cleaned = -0.00719711 Jy ! Component: 1200 - total flux cleaned = -0.0070719 Jy ! Component: 1250 - total flux cleaned = -0.00723679 Jy ! Component: 1300 - total flux cleaned = -0.00727801 Jy ! Component: 1350 - total flux cleaned = -0.00735811 Jy ! Component: 1400 - total flux cleaned = -0.00743765 Jy ! Component: 1450 - total flux cleaned = -0.00747681 Jy ! Component: 1500 - total flux cleaned = -0.00751543 Jy ! Component: 1550 - total flux cleaned = -0.00763034 Jy ! Component: 1600 - total flux cleaned = -0.00759245 Jy ! Component: 1650 - total flux cleaned = -0.00755479 Jy ! Component: 1700 - total flux cleaned = -0.00766665 Jy ! Component: 1750 - total flux cleaned = -0.00774061 Jy ! Component: 1800 - total flux cleaned = -0.00774057 Jy ! Component: 1850 - total flux cleaned = -0.00781224 Jy ! Component: 1900 - total flux cleaned = -0.00799073 Jy ! Component: 1950 - total flux cleaned = -0.00806109 Jy ! Component: 2000 - total flux cleaned = -0.00788598 Jy ! Component: 2050 - total flux cleaned = -0.00819928 Jy ! Component: 2100 - total flux cleaned = -0.00823376 Jy ! Component: 2150 - total flux cleaned = -0.00837007 Jy ! Component: 2200 - total flux cleaned = -0.00833591 Jy ! Component: 2250 - total flux cleaned = -0.00826915 Jy ! Component: 2300 - total flux cleaned = -0.00846829 Jy ! Component: 2350 - total flux cleaned = -0.00843512 Jy ! Component: 2400 - total flux cleaned = -0.00856596 Jy ! Component: 2450 - total flux cleaned = -0.00853343 Jy ! Component: 2500 - total flux cleaned = -0.00869421 Jy ! Component: 2550 - total flux cleaned = -0.00859871 Jy ! Component: 2600 - total flux cleaned = -0.00872579 Jy ! Component: 2650 - total flux cleaned = -0.00869502 Jy ! Component: 2700 - total flux cleaned = -0.0088196 Jy ! Component: 2750 - total flux cleaned = -0.00881982 Jy ! Component: 2800 - total flux cleaned = -0.00894274 Jy ! Component: 2850 - total flux cleaned = -0.00897321 Jy ! Component: 2900 - total flux cleaned = -0.00903364 Jy ! Component: 2950 - total flux cleaned = -0.00906383 Jy ! Component: 3000 - total flux cleaned = -0.00927205 Jy ! Component: 3050 - total flux cleaned = -0.00939036 Jy ! Component: 3100 - total flux cleaned = -0.00944915 Jy ! Component: 3150 - total flux cleaned = -0.00942008 Jy ! Component: 3200 - total flux cleaned = -0.00959353 Jy ! Component: 3250 - total flux cleaned = -0.00956491 Jy ! Component: 3300 - total flux cleaned = -0.00965029 Jy ! Component: 3350 - total flux cleaned = -0.00970714 Jy ! Component: 3400 - total flux cleaned = -0.00987563 Jy ! Component: 3450 - total flux cleaned = -0.00981962 Jy ! Component: 3500 - total flux cleaned = -0.00995835 Jy ! Component: 3550 - total flux cleaned = -0.00995837 Jy ! Component: 3600 - total flux cleaned = -0.00995876 Jy ! Component: 3650 - total flux cleaned = -0.0101492 Jy ! Component: 3700 - total flux cleaned = -0.0102299 Jy ! Component: 3750 - total flux cleaned = -0.0103107 Jy ! Component: 3800 - total flux cleaned = -0.0102837 Jy ! Component: 3850 - total flux cleaned = -0.0104428 Jy ! Component: 3900 - total flux cleaned = -0.010469 Jy ! Component: 3950 - total flux cleaned = -0.0107045 Jy ! Component: 4000 - total flux cleaned = -0.0107045 Jy ! Component: 4050 - total flux cleaned = -0.0108596 Jy ! Total flux subtracted in 4096 components = -0.0109111 Jy ! Clean residual min=-0.001463 max=0.001565 Jy/beam ! Clean residual mean=0.000003 rms=0.000475 Jy/beam ! Combined flux in latest and established models = 1.98339 Jy keep ! Adding 387 model components to the UV plane model. ! The established model now contains 604 components and 1.98339 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uvm//J2134-0153_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7924 x 1.861 at 0.6319 degrees (North through East) ! Clean map min=-0.0034064 max=1.3312 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uvm//J2134-0153_X_a_map.fits wmodel /image_prod/ug002_uvm//J2134-0153_X_a_map.mod ! Writing 604 model components to file: /image_prod/ug002_uvm//J2134-0153_X_a_map.mod wobs /image_prod/ug002_uvm//J2134-0153_X_a_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uvm//J2134-0153_X_a_uvs.fits wwins /image_prod/ug002_uvm//J2134-0153_X_a_map.win ! wwins: Wrote 10 windows to /image_prod/ug002_uvm//J2134-0153_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 1.33115 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000473709 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.106759 0.106759 0.213518 0.427037 0.854074 1.70815 3.41629 6.83259 13.6652 27.3304 54.6607 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak= ", int(1000*peak_flux)/1000 ! peak= 1.331 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2810.06 quit ! Quitting program ! Log file /image_prod/ug002_uvm//J2134-0153_X_a_dfm.log closed on Wed Mar 4 17:43:28 2020