! Started logfile: /image_prod/ug002_uvm//J2116+0225_X_a_dfm.log on Wed Mar 4 17:42:37 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uvm//J2116+0225_X_a_uvm.fits ! Reading UV FITS file: /image_prod/ug002_uvm//J2116+0225_X_a_uvm.fits ! AN table 1: 37 integrations on 10 of 10 possible baselines. ! AN table 2: 76 integrations on 3 of 3 possible baselines. ! AN table 3: 76 integrations on 6 of 6 possible baselines. ! AN table 4: 50 integrations on 15 of 15 possible baselines. ! AN table 5: 50 integrations on 21 of 21 possible baselines. ! AN table 6: 100 integrations on 21 of 21 possible baselines. ! Apparent sampling: 0.75979 visibilities/baseline/integration-bin. ! Found source: J2116+0225 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 108 lines of history. ! ! Reading 45168 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J2116+0225_X_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 114 telescope corrections were flagged in sub-array 2. ! A total of 38 telescope corrections were flagged in sub-array 3. ! A total of 350 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 2. ! A total of 114 telescope corrections were flagged in sub-array 2. ! A total of 38 telescope corrections were flagged in sub-array 3. ! A total of 350 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 3. ! A total of 114 telescope corrections were flagged in sub-array 2. ! A total of 38 telescope corrections were flagged in sub-array 3. ! A total of 350 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 4. ! A total of 114 telescope corrections were flagged in sub-array 2. ! A total of 38 telescope corrections were flagged in sub-array 3. ! A total of 350 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 5. ! A total of 114 telescope corrections were flagged in sub-array 2. ! A total of 38 telescope corrections were flagged in sub-array 3. ! A total of 350 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 6. ! A total of 114 telescope corrections were flagged in sub-array 2. ! A total of 38 telescope corrections were flagged in sub-array 3. ! A total of 350 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 7. ! A total of 114 telescope corrections were flagged in sub-array 2. ! A total of 38 telescope corrections were flagged in sub-array 3. ! A total of 350 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 8. ! A total of 114 telescope corrections were flagged in sub-array 2. ! A total of 38 telescope corrections were flagged in sub-array 3. ! A total of 350 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 9. ! A total of 114 telescope corrections were flagged in sub-array 2. ! A total of 38 telescope corrections were flagged in sub-array 3. ! A total of 350 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 10. ! A total of 114 telescope corrections were flagged in sub-array 2. ! A total of 38 telescope corrections were flagged in sub-array 3. ! A total of 350 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 11. ! A total of 114 telescope corrections were flagged in sub-array 2. ! A total of 38 telescope corrections were flagged in sub-array 3. ! A total of 350 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 12. ! A total of 114 telescope corrections were flagged in sub-array 2. ! A total of 38 telescope corrections were flagged in sub-array 3. ! A total of 350 telescope corrections were flagged in sub-array 6. ! ! Fit before self-cal, rms=1.001113Jy sigma=10.086386 ! Fit after self-cal, rms=0.974686Jy sigma=9.845690 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9006 mas, bmaj=2.353 mas, bpa=-8.256 degrees ! Estimated noise=0.80302 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0209795 Jy ! Component: 100 - total flux cleaned = 0.02539 Jy ! Total flux subtracted in 100 components = 0.02539 Jy ! Clean residual min=-0.002192 max=0.002198 Jy/beam ! Clean residual mean=-0.000001 rms=0.000472 Jy/beam ! Combined flux in latest and established models = 0.02539 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.02539 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.042939Jy sigma=0.414533 ! Fit after self-cal, rms=0.041214Jy sigma=0.396829 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00284805 Jy ! Component: 100 - total flux cleaned = 0.0027321 Jy ! Total flux subtracted in 100 components = 0.0027321 Jy ! Clean residual min=-0.001976 max=0.002022 Jy/beam ! Clean residual mean=-0.000001 rms=0.000459 Jy/beam ! Combined flux in latest and established models = 0.0281221 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0281221 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.041034Jy sigma=0.395416 ! Fit after self-cal, rms=0.041012Jy sigma=0.395293 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.263 mas, bmaj=2.973 mas, bpa=-6.465 degrees ! Estimated noise=0.337229 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000362615 Jy ! Component: 100 - total flux cleaned = -0.000440497 Jy ! Component: 150 - total flux cleaned = -0.000506993 Jy ! Component: 200 - total flux cleaned = -0.000537156 Jy ! Total flux subtracted in 200 components = -0.000537156 Jy ! Clean residual min=-0.001196 max=0.001333 Jy/beam ! Clean residual mean=-0.000000 rms=0.000304 Jy/beam ! Combined flux in latest and established models = 0.0275849 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 16 components and 0.0275849 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.040993Jy sigma=0.395152 ! Fit after self-cal, rms=0.040973Jy sigma=0.395115 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.263 x 2.973 at -6.465 degrees (North through East) ! Clean map min=-0.0012217 max=0.029061 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 0.92 KP 1.14 NL 1.36 ! OV 0.83 ! ! A total of 114 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* HN 0.00* NL 0.00* ! ! A total of 114 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! FD 0.75 KP 1.03 MK 1.16 OV 0.82 ! ! Telescope amplitude corrections in sub-array 4: ! FD 1.01 KP 1.06 LA 1.07 OV 0.94 ! PT 0.93 SC 0.93 ! ! Telescope amplitude corrections in sub-array 5: ! FD 1.04 HN 0.89 KP 1.16 LA 0.96 ! MK 1.22 OV 1.11 PT 0.95 ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.14 FD 1.05 KP 1.18 LA 1.02 ! NL 1.00 OV 1.14 PT 1.12 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.88 KP 1.13 NL 1.42 ! OV 0.85 ! ! A total of 114 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* HN 0.00* NL 0.00* ! ! A total of 114 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! FD 0.93 KP 0.94 MK 1.07 OV 0.91 ! ! Telescope amplitude corrections in sub-array 4: ! FD 0.96 KP 1.15 LA 0.92 OV 1.05 ! PT 1.11 SC 0.91 ! ! Telescope amplitude corrections in sub-array 5: ! FD 1.05 HN 1.00 KP 1.10 LA 1.09 ! MK 1.25 OV 1.04 PT 0.96 ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.12 FD 1.01 KP 1.24 LA 1.11 ! NL 1.10 OV 1.21 PT 1.08 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.83 FD 0.92 KP 1.04 NL 1.22 ! OV 0.90 ! ! A total of 114 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* HN 0.00* NL 0.00* ! ! A total of 114 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! FD 1.07 KP 0.86 MK 0.95 OV 0.98 ! ! Telescope amplitude corrections in sub-array 4: ! FD 0.99 KP 1.07 LA 1.02 OV 0.98 ! PT 1.02 SC 0.94 ! ! Telescope amplitude corrections in sub-array 5: ! FD 1.01 HN 0.80 KP 1.20 LA 1.04 ! MK 1.26 OV 1.18 PT 1.08 ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.01 FD 1.06 KP 1.14 LA 1.15 ! NL 0.97 OV 1.19 PT 1.18 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.08 KP 1.03 NL 1.30 ! OV 0.82 ! ! A total of 114 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* HN 0.00* NL 0.00* ! ! A total of 114 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! FD 0.90 KP 0.95 MK 1.00 OV 1.00 ! ! Telescope amplitude corrections in sub-array 4: ! FD 1.03 KP 0.98 LA 0.96 OV 1.03 ! PT 0.94 SC 1.05 ! ! Telescope amplitude corrections in sub-array 5: ! FD 0.99 HN 0.78 KP 1.23 LA 1.11 ! MK 1.21 OV 1.17 PT 1.17 ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.13 FD 1.09 KP 1.14 LA 1.02 ! NL 0.99 OV 1.13 PT 1.13 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.77 FD 1.03 KP 1.02 NL 1.34 ! OV 0.89 ! ! A total of 114 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* HN 0.00* NL 0.00* ! ! A total of 114 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! FD 0.82 KP 1.01 MK 1.04 OV 0.97 ! ! Telescope amplitude corrections in sub-array 4: ! FD 0.91 KP 1.04 LA 0.99 OV 1.06 ! PT 1.05 SC 0.98 ! ! Telescope amplitude corrections in sub-array 5: ! FD 1.07 HN 0.87 KP 1.17 LA 1.05 ! MK 1.06 OV 1.13 PT 1.02 ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.13 FD 1.11 KP 1.05 LA 1.10 ! NL 0.95 OV 1.10 PT 1.20 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 1.03 KP 1.08 NL 1.23 ! OV 0.81 ! ! A total of 114 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* HN 0.00* NL 0.00* ! ! A total of 114 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! FD 1.00 KP 1.06 MK 0.89 OV 0.86 ! ! Telescope amplitude corrections in sub-array 4: ! FD 0.99 KP 1.10 LA 0.92 OV 0.86 ! PT 0.94 SC 1.03 ! ! Telescope amplitude corrections in sub-array 5: ! FD 1.15 HN 0.79 KP 1.13 LA 0.93 ! MK 1.25 OV 1.14 PT 1.02 ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.06 FD 1.14 KP 1.14 LA 1.03 ! NL 0.97 OV 1.05 PT 1.15 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.85 FD 0.89 KP 1.06 NL 1.17 ! OV 0.93 ! ! A total of 114 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* HN 0.00* NL 0.00* ! ! A total of 114 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! FD 0.87 KP 0.95 MK 1.19 OV 0.85 ! ! Telescope amplitude corrections in sub-array 4: ! FD 0.99 KP 1.01 LA 1.04 OV 0.93 ! PT 0.89 SC 0.96 ! ! Telescope amplitude corrections in sub-array 5: ! FD 1.16 HN 0.79 KP 1.10 LA 0.93 ! MK 1.16 OV 1.11 PT 0.99 ! ! Telescope amplitude corrections in sub-array 6: ! BR 0.98 FD 1.02 KP 1.14 LA 1.01 ! NL 1.03 OV 0.96 PT 1.17 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 FD 0.90 KP 0.88 NL 1.24 ! OV 0.89 ! ! A total of 114 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* HN 0.00* NL 0.00* ! ! A total of 114 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! FD 0.81 KP 1.05 MK 0.95 OV 0.91 ! ! Telescope amplitude corrections in sub-array 4: ! FD 0.91 KP 1.09 LA 1.04 OV 0.88 ! PT 0.96 SC 0.99 ! ! Telescope amplitude corrections in sub-array 5: ! FD 0.90 HN 0.87 KP 1.11 LA 1.02 ! MK 1.16 OV 1.14 PT 0.98 ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.00 FD 1.04 KP 1.28 LA 1.12 ! NL 0.89 OV 1.01 PT 1.06 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.79 FD 1.00 KP 0.90 NL 1.23 ! OV 0.88 ! ! A total of 114 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* HN 0.00* NL 0.00* ! ! A total of 114 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! FD 0.92 KP 0.88 MK 0.98 OV 0.79 ! ! Telescope amplitude corrections in sub-array 4: ! FD 0.92 KP 1.03 LA 0.86 OV 0.97 ! PT 1.00 SC 1.07 ! ! Telescope amplitude corrections in sub-array 5: ! FD 1.00 HN 0.73 KP 1.21 LA 1.08 ! MK 1.05 OV 0.92 PT 1.06 ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.00 FD 0.98 KP 1.28 LA 0.95 ! NL 0.95 OV 1.07 PT 1.00 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.75 FD 0.81 KP 1.10 NL 1.45 ! OV 0.86 ! ! A total of 114 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* HN 0.00* NL 0.00* ! ! A total of 114 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! FD 0.90 KP 0.96 MK 1.03 OV 0.86 ! ! Telescope amplitude corrections in sub-array 4: ! FD 0.87 KP 0.95 LA 0.96 OV 0.93 ! PT 1.02 SC 0.88 ! ! Telescope amplitude corrections in sub-array 5: ! FD 0.93 HN 0.71 KP 1.16 LA 0.95 ! MK 0.98 OV 1.23 PT 1.01 ! ! Telescope amplitude corrections in sub-array 6: ! BR 0.95 FD 1.00 KP 1.20 LA 0.92 ! NL 0.96 OV 1.01 PT 1.16 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 0.83 KP 0.91 NL 1.22 ! OV 0.87 ! ! A total of 114 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* HN 0.00* NL 0.00* ! ! A total of 114 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! FD 0.83 KP 0.89 MK 0.89 OV 0.87 ! ! Telescope amplitude corrections in sub-array 4: ! FD 0.89 KP 0.91 LA 0.97 OV 0.96 ! PT 0.87 SC 0.92 ! ! Telescope amplitude corrections in sub-array 5: ! FD 0.90 HN 0.75 KP 1.16 LA 1.02 ! MK 1.04 OV 0.98 PT 0.98 ! ! Telescope amplitude corrections in sub-array 6: ! BR 0.97 FD 1.00 KP 1.10 LA 0.97 ! NL 0.90 OV 1.07 PT 1.04 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.73 FD 0.78 KP 0.88 NL 1.07 ! OV 0.83 ! ! A total of 114 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* HN 0.00* NL 0.00* ! ! A total of 114 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! FD 0.70 KP 0.85 MK 1.06 OV 0.82 ! ! Telescope amplitude corrections in sub-array 4: ! FD 0.79 KP 1.00 LA 0.96 OV 0.84 ! PT 0.86 SC 0.88 ! ! Telescope amplitude corrections in sub-array 5: ! FD 0.95 HN 0.78 KP 0.99 LA 1.05 ! MK 0.92 OV 0.97 PT 0.94 ! ! Telescope amplitude corrections in sub-array 6: ! BR 0.90 FD 0.87 KP 1.20 LA 1.01 ! NL 0.85 OV 1.06 PT 0.91 ! ! ! Fit before self-cal, rms=0.040973Jy sigma=0.395115 ! Fit after self-cal, rms=0.041207Jy sigma=0.395287 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.226 mas, bmaj=2.864 mas, bpa=-6.979 degrees ! Estimated noise=0.351443 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.11584e-05 Jy ! Component: 100 - total flux cleaned = 0.00010128 Jy ! Component: 150 - total flux cleaned = 0.000124014 Jy ! Component: 200 - total flux cleaned = 0.000144301 Jy ! Total flux subtracted in 200 components = 0.000144301 Jy ! Clean residual min=-0.000570 max=0.000570 Jy/beam ! Clean residual mean=0.000000 rms=0.000135 Jy/beam ! Combined flux in latest and established models = 0.0277292 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 26 components and 0.0277292 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.041205Jy sigma=0.395273 ! Fit after self-cal, rms=0.041263Jy sigma=0.394462 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.041263Jy sigma=0.394462 ! Fit after self-cal, rms=0.041628Jy sigma=0.394217 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.218 mas, bmaj=2.852 mas, bpa=-6.969 degrees ! Estimated noise=0.350858 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.28678e-05 Jy ! Component: 100 - total flux cleaned = 7.95939e-05 Jy ! Component: 150 - total flux cleaned = 0.000105272 Jy ! Component: 200 - total flux cleaned = 0.000123087 Jy ! Total flux subtracted in 200 components = 0.000123087 Jy ! Clean residual min=-0.000562 max=0.000586 Jy/beam ! Clean residual mean=0.000000 rms=0.000133 Jy/beam ! Combined flux in latest and established models = 0.0278523 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 27 components and 0.0278523 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.041626Jy sigma=0.394205 ! Fit after self-cal, rms=0.041683Jy sigma=0.393974 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-26, -16.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000545869 Jy ! Component: 100 - total flux cleaned = 0.000674824 Jy ! Component: 150 - total flux cleaned = 0.000742286 Jy ! Component: 200 - total flux cleaned = 0.000783292 Jy ! Total flux subtracted in 200 components = 0.000783292 Jy ! Clean residual min=-0.000552 max=0.000525 Jy/beam ! Clean residual mean=0.000001 rms=0.000122 Jy/beam ! Combined flux in latest and established models = 0.0286356 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 50 components and 0.0286356 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.041674Jy sigma=0.393893 ! Fit after self-cal, rms=0.041668Jy sigma=0.393834 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.041668Jy sigma=0.393834 ! Fit after self-cal, rms=0.041849Jy sigma=0.393787 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.214 mas, bmaj=2.844 mas, bpa=-6.947 degrees ! Estimated noise=0.350058 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000408772 Jy ! Component: 100 - total flux cleaned = 0.000587594 Jy ! Component: 150 - total flux cleaned = 0.000661893 Jy ! Component: 200 - total flux cleaned = 0.000718852 Jy ! Total flux subtracted in 200 components = 0.000718852 Jy ! Clean residual min=-0.000511 max=0.000499 Jy/beam ! Clean residual mean=0.000000 rms=0.000117 Jy/beam ! Combined flux in latest and established models = 0.0293545 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 54 components and 0.0293545 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.041845Jy sigma=0.393737 ! Fit after self-cal, rms=0.041869Jy sigma=0.393648 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000326997 Jy ! Component: 100 - total flux cleaned = 0.000403937 Jy ! Component: 150 - total flux cleaned = 0.000447657 Jy ! Component: 200 - total flux cleaned = 0.000480351 Jy ! Total flux subtracted in 200 components = 0.000480351 Jy ! Clean residual min=-0.000507 max=0.000475 Jy/beam ! Clean residual mean=0.000001 rms=0.000116 Jy/beam ! Combined flux in latest and established models = 0.0298348 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 60 components and 0.0298348 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.041866Jy sigma=0.393617 ! Fit after self-cal, rms=0.041864Jy sigma=0.393561 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.041864Jy sigma=0.393561 ! Fit after self-cal, rms=0.041928Jy sigma=0.393542 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.738 mas, bmaj=4.11 mas, bpa=9.279 degrees ! Estimated noise=0.402955 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000330396 Jy ! Component: 100 - total flux cleaned = 0.000501108 Jy ! Component: 150 - total flux cleaned = 0.000551669 Jy ! Component: 200 - total flux cleaned = 0.000573355 Jy ! Total flux subtracted in 200 components = 0.000573355 Jy ! Clean residual min=-0.000490 max=0.000471 Jy/beam ! Clean residual mean=0.000001 rms=0.000132 Jy/beam ! Combined flux in latest and established models = 0.0304082 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 76 components and 0.0304082 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.041926Jy sigma=0.393521 ! Fit after self-cal, rms=0.041939Jy sigma=0.393493 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00022417 Jy ! Component: 100 - total flux cleaned = 0.000298563 Jy ! Component: 150 - total flux cleaned = 0.000306937 Jy ! Component: 200 - total flux cleaned = 0.00031055 Jy ! Total flux subtracted in 200 components = 0.00031055 Jy ! Clean residual min=-0.000497 max=0.000446 Jy/beam ! Clean residual mean=0.000001 rms=0.000131 Jy/beam ! Combined flux in latest and established models = 0.0307187 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 81 components and 0.0307187 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.041938Jy sigma=0.393483 ! Fit after self-cal, rms=0.041938Jy sigma=0.393468 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=1.213 mas, bmaj=2.838 mas, bpa=-6.899 degrees ! Estimated noise=0.349555 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.213 x 2.838 at -6.899 degrees (North through East) ! Clean map min=-0.00050284 max=0.028571 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8805 mas, bmaj=2.261 mas, bpa=-8.047 degrees ! Estimated noise=0.81309 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.022334 Jy ! Component: 100 - total flux cleaned = 0.0272547 Jy ! Component: 150 - total flux cleaned = 0.0281428 Jy ! Component: 200 - total flux cleaned = 0.0288483 Jy ! Total flux subtracted in 200 components = 0.0288483 Jy ! Clean residual min=-0.001169 max=0.001095 Jy/beam ! Clean residual mean=-0.000000 rms=0.000278 Jy/beam ! Combined flux in latest and established models = 0.0288483 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.0288483 Jy ! Inverting map and beam ! Estimated beam: bmin=1.213 mas, bmaj=2.838 mas, bpa=-6.899 degrees ! Estimated noise=0.349555 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000827728 Jy ! Component: 100 - total flux cleaned = 0.00123021 Jy ! Component: 150 - total flux cleaned = 0.00150902 Jy ! Component: 200 - total flux cleaned = 0.00165275 Jy ! Total flux subtracted in 200 components = 0.00165275 Jy ! Clean residual min=-0.000570 max=0.000504 Jy/beam ! Clean residual mean=0.000000 rms=0.000125 Jy/beam ! Combined flux in latest and established models = 0.030501 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 32 components and 0.030501 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.738 mas, bmaj=4.11 mas, bpa=9.279 degrees ! Estimated noise=0.402955 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000282405 Jy ! Component: 100 - total flux cleaned = 0.000364127 Jy ! Component: 150 - total flux cleaned = 0.000413065 Jy ! Component: 200 - total flux cleaned = 0.000449078 Jy ! Total flux subtracted in 200 components = 0.000449078 Jy ! Clean residual min=-0.000522 max=0.000469 Jy/beam ! Clean residual mean=0.000001 rms=0.000134 Jy/beam ! Combined flux in latest and established models = 0.0309501 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.6005e-05 Jy ! Component: 100 - total flux cleaned = 2.0671e-05 Jy ! Component: 150 - total flux cleaned = 2.51286e-05 Jy ! Component: 200 - total flux cleaned = 2.93573e-05 Jy ! Total flux subtracted in 200 components = 2.93573e-05 Jy ! Clean residual min=-0.000511 max=0.000465 Jy/beam ! Clean residual mean=0.000001 rms=0.000132 Jy/beam ! Combined flux in latest and established models = 0.0309795 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 46 components and 0.0309795 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.213 mas, bmaj=2.838 mas, bpa=-6.899 degrees ! Estimated noise=0.349555 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.55361e-05 Jy ! Component: 100 - total flux cleaned = -3.23142e-05 Jy ! Component: 150 - total flux cleaned = -3.28581e-05 Jy ! Component: 200 - total flux cleaned = -3.28778e-05 Jy ! Total flux subtracted in 200 components = -3.28778e-05 Jy ! Clean residual min=-0.000491 max=0.000463 Jy/beam ! Clean residual mean=0.000001 rms=0.000115 Jy/beam ! Combined flux in latest and established models = 0.0309466 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 59 components and 0.0309466 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.041939Jy sigma=0.393501 ! Fit after self-cal, rms=0.041936Jy sigma=0.393468 wmodel J2116+0225_X_a_map.mod ! Writing 59 model components to file: J2116+0225_X_a_map.mod wobs J2116+0225_X_a_uvs.fits ! Writing UV FITS file: J2116+0225_X_a_uvs.fits wwins J2116+0225_X_a_map.win ! wwins: Wrote 2 windows to J2116+0225_X_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00016622 Jy ! Component: 100 - total flux cleaned = -0.000233875 Jy ! Component: 150 - total flux cleaned = -0.00031193 Jy ! Component: 200 - total flux cleaned = -0.000352748 Jy ! Component: 250 - total flux cleaned = -0.000372529 Jy ! Component: 300 - total flux cleaned = -0.000372607 Jy ! Component: 350 - total flux cleaned = -0.000360298 Jy ! Component: 400 - total flux cleaned = -0.000354352 Jy ! Component: 450 - total flux cleaned = -0.000360426 Jy ! Component: 500 - total flux cleaned = -0.000360465 Jy ! Component: 550 - total flux cleaned = -0.000343443 Jy ! Component: 600 - total flux cleaned = -0.000337892 Jy ! Component: 650 - total flux cleaned = -0.000326914 Jy ! Component: 700 - total flux cleaned = -0.000321529 Jy ! Component: 750 - total flux cleaned = -0.00032674 Jy ! Component: 800 - total flux cleaned = -0.000321444 Jy ! Component: 850 - total flux cleaned = -0.000311124 Jy ! Component: 900 - total flux cleaned = -0.000321209 Jy ! Component: 950 - total flux cleaned = -0.000316201 Jy ! Component: 1000 - total flux cleaned = -0.00031621 Jy ! Component: 1050 - total flux cleaned = -0.000316299 Jy ! Component: 1100 - total flux cleaned = -0.00033526 Jy ! Component: 1150 - total flux cleaned = -0.000358551 Jy ! Component: 1200 - total flux cleaned = -0.000367706 Jy ! Component: 1250 - total flux cleaned = -0.000399507 Jy ! Component: 1300 - total flux cleaned = -0.000426381 Jy ! Component: 1350 - total flux cleaned = -0.000444086 Jy ! Component: 1400 - total flux cleaned = -0.000465863 Jy ! Component: 1450 - total flux cleaned = -0.000470144 Jy ! Component: 1500 - total flux cleaned = -0.000474434 Jy ! Component: 1550 - total flux cleaned = -0.000495596 Jy ! Component: 1600 - total flux cleaned = -0.000491373 Jy ! Component: 1650 - total flux cleaned = -0.000516203 Jy ! Component: 1700 - total flux cleaned = -0.000516232 Jy ! Component: 1750 - total flux cleaned = -0.0005 Jy ! Component: 1800 - total flux cleaned = -0.000520065 Jy ! Component: 1850 - total flux cleaned = -0.000512038 Jy ! Component: 1900 - total flux cleaned = -0.000512066 Jy ! Component: 1950 - total flux cleaned = -0.000523746 Jy ! Component: 2000 - total flux cleaned = -0.000523723 Jy ! Component: 2050 - total flux cleaned = -0.000519875 Jy ! Component: 2100 - total flux cleaned = -0.000523683 Jy ! Component: 2150 - total flux cleaned = -0.000531227 Jy ! Component: 2200 - total flux cleaned = -0.000534932 Jy ! Component: 2250 - total flux cleaned = -0.000549644 Jy ! Component: 2300 - total flux cleaned = -0.000556924 Jy ! Component: 2350 - total flux cleaned = -0.000575001 Jy ! Component: 2400 - total flux cleaned = -0.000592927 Jy ! Component: 2450 - total flux cleaned = -0.000607119 Jy ! Component: 2500 - total flux cleaned = -0.000614189 Jy ! Component: 2550 - total flux cleaned = -0.000649138 Jy ! Component: 2600 - total flux cleaned = -0.000659548 Jy ! Component: 2650 - total flux cleaned = -0.000687024 Jy ! Component: 2700 - total flux cleaned = -0.00069044 Jy ! Component: 2750 - total flux cleaned = -0.000714131 Jy ! Component: 2800 - total flux cleaned = -0.000730887 Jy ! Component: 2850 - total flux cleaned = -0.000757462 Jy ! Component: 2900 - total flux cleaned = -0.000770654 Jy ! Component: 2950 - total flux cleaned = -0.00078377 Jy ! Component: 3000 - total flux cleaned = -0.000796765 Jy ! Component: 3050 - total flux cleaned = -0.000822547 Jy ! Component: 3100 - total flux cleaned = -0.000832147 Jy ! Component: 3150 - total flux cleaned = -0.000854378 Jy ! Component: 3200 - total flux cleaned = -0.000866975 Jy ! Component: 3250 - total flux cleaned = -0.000879489 Jy ! Component: 3300 - total flux cleaned = -0.000891924 Jy ! Component: 3350 - total flux cleaned = -0.000894968 Jy ! Component: 3400 - total flux cleaned = -0.000901066 Jy ! Component: 3450 - total flux cleaned = -0.000919347 Jy ! Component: 3500 - total flux cleaned = -0.000928397 Jy ! Component: 3550 - total flux cleaned = -0.000940427 Jy ! Component: 3600 - total flux cleaned = -0.00095239 Jy ! Component: 3650 - total flux cleaned = -0.000970198 Jy ! Component: 3700 - total flux cleaned = -0.000970205 Jy ! Component: 3750 - total flux cleaned = -0.000976066 Jy ! Component: 3800 - total flux cleaned = -0.000973174 Jy ! Component: 3850 - total flux cleaned = -0.000984782 Jy ! Component: 3900 - total flux cleaned = -0.00100209 Jy ! Component: 3950 - total flux cleaned = -0.00101071 Jy ! Component: 4000 - total flux cleaned = -0.00100788 Jy ! Component: 4050 - total flux cleaned = -0.00102202 Jy ! Total flux subtracted in 4096 components = -0.00103047 Jy ! Clean residual min=-0.000159 max=0.000159 Jy/beam ! Clean residual mean=0.000000 rms=0.000049 Jy/beam ! Combined flux in latest and established models = 0.0299161 Jy keep ! Adding 262 model components to the UV plane model. ! The established model now contains 321 components and 0.0299161 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uvm//J2116+0225_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.213 x 2.838 at -6.899 degrees (North through East) ! Clean map min=-0.00031791 max=0.028454 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uvm//J2116+0225_X_a_map.fits wmodel /image_prod/ug002_uvm//J2116+0225_X_a_map.mod ! Writing 321 model components to file: /image_prod/ug002_uvm//J2116+0225_X_a_map.mod wobs /image_prod/ug002_uvm//J2116+0225_X_a_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uvm//J2116+0225_X_a_uvs.fits wwins /image_prod/ug002_uvm//J2116+0225_X_a_map.win ! wwins: Wrote 3 windows to /image_prod/ug002_uvm//J2116+0225_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0284541 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 4.87448e-05 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.513931 0.513931 1.02786 2.05572 4.11145 8.2229 16.4458 32.8916 65.7832 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0001 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.028 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 583.736 quit ! Quitting program ! Log file /image_prod/ug002_uvm//J2116+0225_X_a_dfm.log closed on Wed Mar 4 17:42:44 2020