! Started logfile: /image_prod/ug002_uvm//J2114+8204_X_a_dfm.log on Wed Mar 4 17:42:22 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uvm//J2114+8204_X_a_uvm.fits ! Reading UV FITS file: /image_prod/ug002_uvm//J2114+8204_X_a_uvm.fits ! AN table 1: 60 integrations on 45 of 45 possible baselines. ! AN table 2: 85 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.886458 visibilities/baseline/integration-bin. ! Found source: J2114+8204 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 61272 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J2114+8204_X_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 48 telescope corrections were flagged in sub-array 1. ! A total of 89 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 48 telescope corrections were flagged in sub-array 1. ! A total of 89 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 48 telescope corrections were flagged in sub-array 1. ! A total of 89 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 48 telescope corrections were flagged in sub-array 1. ! A total of 89 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 48 telescope corrections were flagged in sub-array 1. ! A total of 89 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 48 telescope corrections were flagged in sub-array 1. ! A total of 89 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 48 telescope corrections were flagged in sub-array 1. ! A total of 89 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 48 telescope corrections were flagged in sub-array 1. ! A total of 89 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 9. ! A total of 48 telescope corrections were flagged in sub-array 1. ! A total of 89 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 10. ! A total of 48 telescope corrections were flagged in sub-array 1. ! A total of 89 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 11. ! A total of 48 telescope corrections were flagged in sub-array 1. ! A total of 89 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 12. ! A total of 48 telescope corrections were flagged in sub-array 1. ! A total of 89 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.006219Jy sigma=8.918207 ! Fit after self-cal, rms=0.908533Jy sigma=8.040109 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7999 mas, bmaj=1.139 mas, bpa=-25.35 degrees ! Estimated noise=0.736406 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0689806 Jy ! Component: 100 - total flux cleaned = 0.0898792 Jy ! Total flux subtracted in 100 components = 0.0898792 Jy ! Clean residual min=-0.003912 max=0.009500 Jy/beam ! Clean residual mean=0.000001 rms=0.000811 Jy/beam ! Combined flux in latest and established models = 0.0898792 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0898792 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063817Jy sigma=0.517198 ! Fit after self-cal, rms=0.063621Jy sigma=0.515521 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0108027 Jy ! Component: 100 - total flux cleaned = 0.016321 Jy ! Total flux subtracted in 100 components = 0.016321 Jy ! Clean residual min=-0.003395 max=0.006352 Jy/beam ! Clean residual mean=-0.000000 rms=0.000695 Jy/beam ! Combined flux in latest and established models = 0.1062 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 10 components and 0.1062 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061567Jy sigma=0.496107 ! Fit after self-cal, rms=0.061537Jy sigma=0.495788 ! Inverting map ! Added new window around map position (-2, 4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00594573 Jy ! Component: 100 - total flux cleaned = 0.00798917 Jy ! Total flux subtracted in 100 components = 0.00798917 Jy ! Clean residual min=-0.003094 max=0.004506 Jy/beam ! Clean residual mean=-0.000000 rms=0.000647 Jy/beam ! Combined flux in latest and established models = 0.114189 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 21 components and 0.114189 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060871Jy sigma=0.489212 ! Fit after self-cal, rms=0.060828Jy sigma=0.488832 ! Inverting map ! Added new window around map position (-0.8, 1.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00430386 Jy ! Component: 100 - total flux cleaned = 0.0060567 Jy ! Total flux subtracted in 100 components = 0.0060567 Jy ! Clean residual min=-0.002876 max=0.003535 Jy/beam ! Clean residual mean=-0.000001 rms=0.000609 Jy/beam ! Combined flux in latest and established models = 0.120246 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 26 components and 0.120246 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060414Jy sigma=0.484748 ! Fit after self-cal, rms=0.060378Jy sigma=0.484423 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.076 mas, bmaj=1.436 mas, bpa=-14.74 degrees ! Estimated noise=0.344819 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.8, 2.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00387476 Jy ! Component: 100 - total flux cleaned = 0.00581127 Jy ! Component: 150 - total flux cleaned = 0.00680631 Jy ! Component: 200 - total flux cleaned = 0.0071553 Jy ! Total flux subtracted in 200 components = 0.0071553 Jy ! Clean residual min=-0.001988 max=0.003302 Jy/beam ! Clean residual mean=0.000000 rms=0.000523 Jy/beam ! Combined flux in latest and established models = 0.127401 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 55 components and 0.127401 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060081Jy sigma=0.481709 ! Fit after self-cal, rms=0.060047Jy sigma=0.481396 ! Inverting map ! Added new window around map position (13.4, -31). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00299165 Jy ! Component: 100 - total flux cleaned = 0.00443574 Jy ! Component: 150 - total flux cleaned = 0.00510418 Jy ! Component: 200 - total flux cleaned = 0.00564139 Jy ! Total flux subtracted in 200 components = 0.00564139 Jy ! Clean residual min=-0.001900 max=0.002757 Jy/beam ! Clean residual mean=0.000002 rms=0.000489 Jy/beam ! Combined flux in latest and established models = 0.133043 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 75 components and 0.133043 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059859Jy sigma=0.479629 ! Fit after self-cal, rms=0.059844Jy sigma=0.479469 ! Inverting map ! Added new window around map position (-4.4, 7.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00252185 Jy ! Component: 100 - total flux cleaned = 0.00387982 Jy ! Component: 150 - total flux cleaned = 0.0045676 Jy ! Component: 200 - total flux cleaned = 0.0051014 Jy ! Total flux subtracted in 200 components = 0.0051014 Jy ! Clean residual min=-0.001855 max=0.002634 Jy/beam ! Clean residual mean=0.000002 rms=0.000469 Jy/beam ! Combined flux in latest and established models = 0.138144 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 92 components and 0.138144 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059709Jy sigma=0.478275 ! Fit after self-cal, rms=0.059698Jy sigma=0.478161 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.076 x 1.436 at -14.74 degrees (North through East) ! Clean map min=-0.0017886 max=0.090936 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.90 HN 1.00 KP 1.06 ! LA 1.01 MK 1.05 NL 1.15 OV 0.91 ! PT 0.89 SC 0.87 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.06 HN 1.08 KP 1.03 ! LA 1.00* NL 1.03 OV 1.03 PT 1.04 ! SC 1.08 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.88 HN 0.94 KP 1.05 ! LA 1.01 MK 1.01 NL 1.17 OV 0.91 ! PT 0.88 SC 0.90 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.04 FD 1.04 HN 1.02 KP 1.02 ! LA 1.00* NL 1.05 OV 1.05 PT 1.04 ! SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.88 HN 0.94 KP 1.05 ! LA 1.04 MK 0.99 NL 1.14 OV 0.93 ! PT 0.86 SC 0.88 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 1.02 HN 0.99 KP 1.03 ! LA 1.00* NL 1.04 OV 1.03 PT 1.03 ! SC 1.04 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.88 HN 0.97 KP 1.06 ! LA 1.01 MK 1.02 NL 1.14 OV 0.94 ! PT 0.90 SC 0.89 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 1.04 HN 1.02 KP 1.04 ! LA 1.00* NL 1.02 OV 1.02 PT 1.02 ! SC 1.09 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.89 HN 0.94 KP 1.06 ! LA 1.01 MK 0.99 NL 1.16 OV 0.91 ! PT 0.86 SC 0.93 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 1.03 HN 1.06 KP 1.04 ! LA 1.00* NL 1.04 OV 1.02 PT 1.04 ! SC 1.02 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.93 HN 0.96 KP 1.06 ! LA 1.02 MK 1.00 NL 1.16 OV 0.91 ! PT 0.87 SC 0.86 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.06 FD 1.04 HN 1.00 KP 1.02 ! LA 1.00* NL 1.05 OV 1.01 PT 1.03 ! SC 1.04 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.86 HN 0.95 KP 1.06 ! LA 0.99 MK 1.03 NL 1.16 OV 0.94 ! PT 0.92 SC 0.86 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 0.99 HN 1.00 KP 1.01 ! LA 1.00* NL 1.04 OV 1.05 PT 1.08 ! SC 1.02 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.88 HN 0.99 KP 1.06 ! LA 1.01 MK 1.01 NL 1.18 OV 0.91 ! PT 0.92 SC 0.88 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 1.03 HN 1.01 KP 1.03 ! LA 1.00* NL 1.03 OV 1.02 PT 1.08 ! SC 1.04 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.89 HN 0.94 KP 1.05 ! LA 1.01 MK 1.01 NL 1.19 OV 0.90 ! PT 0.87 SC 0.88 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 1.02 HN 1.04 KP 1.06 ! LA 1.00* NL 1.04 OV 1.02 PT 1.05 ! SC 1.08 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.88 HN 0.97 KP 1.04 ! LA 1.00 MK 1.02 NL 1.18 OV 0.93 ! PT 0.88 SC 0.89 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 1.04 HN 1.04 KP 1.04 ! LA 1.00* NL 1.02 OV 1.03 PT 1.04 ! SC 1.01 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.86 HN 0.94 KP 1.08 ! LA 0.98 MK 0.97 NL 1.19 OV 0.92 ! PT 0.90 SC 0.89 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 0.99 HN 1.03 KP 1.04 ! LA 1.00* NL 1.03 OV 1.04 PT 1.02 ! SC 1.10 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.91 HN 1.01 KP 1.04 ! LA 0.98 MK 0.93 NL 1.17 OV 0.92 ! PT 0.90 SC 0.82 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 1.03 HN 0.98 KP 1.04 ! LA 1.00* NL 1.02 OV 1.03 PT 1.08 ! SC 1.02 ! ! ! Fit before self-cal, rms=0.059698Jy sigma=0.478161 ! Fit after self-cal, rms=0.058213Jy sigma=0.469175 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.062 mas, bmaj=1.427 mas, bpa=-17.08 degrees ! Estimated noise=0.344958 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000245902 Jy ! Component: 100 - total flux cleaned = -0.000295125 Jy ! Component: 150 - total flux cleaned = -0.000223223 Jy ! Component: 200 - total flux cleaned = -0.000121255 Jy ! Total flux subtracted in 200 components = -0.000121255 Jy ! Clean residual min=-0.001534 max=0.001271 Jy/beam ! Clean residual mean=0.000002 rms=0.000324 Jy/beam ! Combined flux in latest and established models = 0.138023 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 111 components and 0.138023 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058151Jy sigma=0.468688 ! Fit after self-cal, rms=0.058155Jy sigma=0.468564 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058155Jy sigma=0.468564 ! Fit after self-cal, rms=0.059837Jy sigma=0.461475 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.059 mas, bmaj=1.435 mas, bpa=-16.71 degrees ! Estimated noise=0.346961 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000480373 Jy ! Component: 100 - total flux cleaned = -0.000694635 Jy ! Component: 150 - total flux cleaned = -0.000819669 Jy ! Component: 200 - total flux cleaned = -0.00087638 Jy ! Total flux subtracted in 200 components = -0.00087638 Jy ! Clean residual min=-0.000673 max=0.000728 Jy/beam ! Clean residual mean=0.000001 rms=0.000173 Jy/beam ! Combined flux in latest and established models = 0.137147 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 124 components and 0.137147 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059797Jy sigma=0.461117 ! Fit after self-cal, rms=0.059854Jy sigma=0.460992 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000172739 Jy ! Component: 100 - total flux cleaned = -0.000221016 Jy ! Component: 150 - total flux cleaned = -0.000242469 Jy ! Component: 200 - total flux cleaned = -0.000242545 Jy ! Total flux subtracted in 200 components = -0.000242545 Jy ! Clean residual min=-0.000674 max=0.000708 Jy/beam ! Clean residual mean=0.000001 rms=0.000169 Jy/beam ! Combined flux in latest and established models = 0.136904 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 134 components and 0.136904 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059838Jy sigma=0.460854 ! Fit after self-cal, rms=0.059836Jy sigma=0.460847 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059836Jy sigma=0.460847 ! Fit after self-cal, rms=0.060095Jy sigma=0.460774 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.057 mas, bmaj=1.433 mas, bpa=-16.78 degrees ! Estimated noise=0.346744 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000333907 Jy ! Component: 100 - total flux cleaned = -0.000495954 Jy ! Component: 150 - total flux cleaned = -0.00047558 Jy ! Component: 200 - total flux cleaned = -0.000513554 Jy ! Total flux subtracted in 200 components = -0.000513554 Jy ! Clean residual min=-0.000653 max=0.000710 Jy/beam ! Clean residual mean=0.000001 rms=0.000162 Jy/beam ! Combined flux in latest and established models = 0.136391 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 142 components and 0.136391 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060079Jy sigma=0.460635 ! Fit after self-cal, rms=0.060081Jy sigma=0.460631 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (30.6, 11). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000364515 Jy ! Component: 100 - total flux cleaned = 0.000362516 Jy ! Component: 150 - total flux cleaned = 0.000345963 Jy ! Component: 200 - total flux cleaned = 0.000345942 Jy ! Total flux subtracted in 200 components = 0.000345942 Jy ! Clean residual min=-0.000647 max=0.000604 Jy/beam ! Clean residual mean=0.000001 rms=0.000158 Jy/beam ! Combined flux in latest and established models = 0.136736 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 157 components and 0.136736 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060070Jy sigma=0.460532 ! Fit after self-cal, rms=0.060070Jy sigma=0.460530 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060070Jy sigma=0.460530 ! Fit after self-cal, rms=0.060129Jy sigma=0.460503 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.273 mas, bmaj=2.647 mas, bpa=1.698 degrees ! Estimated noise=0.434314 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00012314 Jy ! Component: 100 - total flux cleaned = -0.000171931 Jy ! Component: 150 - total flux cleaned = -0.000131695 Jy ! Component: 200 - total flux cleaned = -0.000108446 Jy ! Total flux subtracted in 200 components = -0.000108446 Jy ! Clean residual min=-0.000703 max=0.000675 Jy/beam ! Clean residual mean=0.000002 rms=0.000182 Jy/beam ! Combined flux in latest and established models = 0.136628 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 177 components and 0.136628 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060124Jy sigma=0.460449 ! Fit after self-cal, rms=0.060125Jy sigma=0.460444 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.88309e-05 Jy ! Component: 100 - total flux cleaned = -4.86617e-05 Jy ! Component: 150 - total flux cleaned = -5.82224e-05 Jy ! Component: 200 - total flux cleaned = -6.68493e-05 Jy ! Total flux subtracted in 200 components = -6.68493e-05 Jy ! Clean residual min=-0.000694 max=0.000680 Jy/beam ! Clean residual mean=0.000002 rms=0.000180 Jy/beam ! Combined flux in latest and established models = 0.136561 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 187 components and 0.136561 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060123Jy sigma=0.460419 ! Fit after self-cal, rms=0.060123Jy sigma=0.460418 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=1.055 mas, bmaj=1.432 mas, bpa=-16.82 degrees ! Estimated noise=0.346527 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.055 x 1.432 at -16.82 degrees (North through East) ! Clean map min=-0.00077102 max=0.091574 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7816 mas, bmaj=1.141 mas, bpa=-26.54 degrees ! Estimated noise=0.725235 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.067588 Jy ! Component: 100 - total flux cleaned = 0.0895311 Jy ! Component: 150 - total flux cleaned = 0.101009 Jy ! Component: 200 - total flux cleaned = 0.108345 Jy ! Total flux subtracted in 200 components = 0.108345 Jy ! Clean residual min=-0.001939 max=0.004063 Jy/beam ! Clean residual mean=-0.000000 rms=0.000445 Jy/beam ! Combined flux in latest and established models = 0.108345 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.108345 Jy ! Inverting map and beam ! Estimated beam: bmin=1.055 mas, bmaj=1.432 mas, bpa=-16.82 degrees ! Estimated noise=0.346527 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0073539 Jy ! Component: 100 - total flux cleaned = 0.0121598 Jy ! Component: 150 - total flux cleaned = 0.0154895 Jy ! Component: 200 - total flux cleaned = 0.01786 Jy ! Total flux subtracted in 200 components = 0.01786 Jy ! Clean residual min=-0.000907 max=0.001431 Jy/beam ! Clean residual mean=0.000001 rms=0.000221 Jy/beam ! Combined flux in latest and established models = 0.126205 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 42 components and 0.126205 Jy ! Inverting map ! Added new window around map position (-2.8, 5.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0018083 Jy ! Component: 100 - total flux cleaned = 0.00324487 Jy ! Component: 150 - total flux cleaned = 0.0044097 Jy ! Component: 200 - total flux cleaned = 0.00524252 Jy ! Total flux subtracted in 200 components = 0.00524252 Jy ! Clean residual min=-0.000762 max=0.000772 Jy/beam ! Clean residual mean=0.000000 rms=0.000178 Jy/beam ! Combined flux in latest and established models = 0.131448 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 66 components and 0.131448 Jy ! Inverting map ! Added new window around map position (6, -8.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000659071 Jy ! Component: 100 - total flux cleaned = 0.00120424 Jy ! Component: 150 - total flux cleaned = 0.0016738 Jy ! Component: 200 - total flux cleaned = 0.00210413 Jy ! Total flux subtracted in 200 components = 0.00210413 Jy ! Clean residual min=-0.000723 max=0.000700 Jy/beam ! Clean residual mean=0.000000 rms=0.000165 Jy/beam ! Combined flux in latest and established models = 0.133552 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 83 components and 0.133552 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.273 mas, bmaj=2.647 mas, bpa=1.698 degrees ! Estimated noise=0.434314 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000864808 Jy ! Component: 100 - total flux cleaned = 0.00153986 Jy ! Component: 150 - total flux cleaned = 0.00207166 Jy ! Component: 200 - total flux cleaned = 0.00237178 Jy ! Total flux subtracted in 200 components = 0.00237178 Jy ! Clean residual min=-0.000748 max=0.000666 Jy/beam ! Clean residual mean=0.000001 rms=0.000184 Jy/beam ! Combined flux in latest and established models = 0.135924 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000211993 Jy ! Component: 100 - total flux cleaned = 0.000398822 Jy ! Component: 150 - total flux cleaned = 0.000577393 Jy ! Component: 200 - total flux cleaned = 0.000725999 Jy ! Total flux subtracted in 200 components = 0.000725999 Jy ! Clean residual min=-0.000716 max=0.000666 Jy/beam ! Clean residual mean=0.000001 rms=0.000178 Jy/beam ! Combined flux in latest and established models = 0.13665 Jy ! Adding 82 model components to the UV plane model. ! The established model now contains 154 components and 0.13665 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.055 mas, bmaj=1.432 mas, bpa=-16.82 degrees ! Estimated noise=0.346527 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000170755 Jy ! Component: 100 - total flux cleaned = -0.000152674 Jy ! Component: 150 - total flux cleaned = -0.000134441 Jy ! Component: 200 - total flux cleaned = -6.84344e-05 Jy ! Total flux subtracted in 200 components = -6.84344e-05 Jy ! Clean residual min=-0.000668 max=0.000633 Jy/beam ! Clean residual mean=0.000001 rms=0.000154 Jy/beam ! Combined flux in latest and established models = 0.136581 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 169 components and 0.136581 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060132Jy sigma=0.460518 ! Fit after self-cal, rms=0.060123Jy sigma=0.460469 wmodel J2114+8204_X_a_map.mod ! Writing 169 model components to file: J2114+8204_X_a_map.mod wobs J2114+8204_X_a_uvs.fits ! Writing UV FITS file: J2114+8204_X_a_uvs.fits wwins J2114+8204_X_a_map.win ! wwins: Wrote 9 windows to J2114+8204_X_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00010942 Jy ! Component: 100 - total flux cleaned = -0.000120545 Jy ! Component: 150 - total flux cleaned = -0.000196565 Jy ! Component: 200 - total flux cleaned = -0.000238604 Jy ! Component: 250 - total flux cleaned = -0.00023865 Jy ! Component: 300 - total flux cleaned = -0.000248857 Jy ! Component: 350 - total flux cleaned = -0.00027882 Jy ! Component: 400 - total flux cleaned = -0.00030846 Jy ! Component: 450 - total flux cleaned = -0.000347231 Jy ! Component: 500 - total flux cleaned = -0.000337649 Jy ! Component: 550 - total flux cleaned = -0.000347313 Jy ! Component: 600 - total flux cleaned = -0.000356766 Jy ! Component: 650 - total flux cleaned = -0.000338417 Jy ! Component: 700 - total flux cleaned = -0.000375105 Jy ! Component: 750 - total flux cleaned = -0.000365836 Jy ! Component: 800 - total flux cleaned = -0.000347711 Jy ! Component: 850 - total flux cleaned = -0.000329912 Jy ! Component: 900 - total flux cleaned = -0.000356342 Jy ! Component: 950 - total flux cleaned = -0.000320979 Jy ! Component: 1000 - total flux cleaned = -0.00030356 Jy ! Component: 1050 - total flux cleaned = -0.000294843 Jy ! Component: 1100 - total flux cleaned = -0.000312145 Jy ! Component: 1150 - total flux cleaned = -0.00032074 Jy ! Component: 1200 - total flux cleaned = -0.000286873 Jy ! Component: 1250 - total flux cleaned = -0.000320716 Jy ! Component: 1300 - total flux cleaned = -0.000345879 Jy ! Component: 1350 - total flux cleaned = -0.000329145 Jy ! Component: 1400 - total flux cleaned = -0.000320838 Jy ! Component: 1450 - total flux cleaned = -0.000329091 Jy ! Component: 1500 - total flux cleaned = -0.000353605 Jy ! Component: 1550 - total flux cleaned = -0.000353634 Jy ! Component: 1600 - total flux cleaned = -0.000353573 Jy ! Component: 1650 - total flux cleaned = -0.000321402 Jy ! Component: 1700 - total flux cleaned = -0.000345489 Jy ! Component: 1750 - total flux cleaned = -0.000369465 Jy ! Component: 1800 - total flux cleaned = -0.000345671 Jy ! Component: 1850 - total flux cleaned = -0.000369406 Jy ! Component: 1900 - total flux cleaned = -0.000377191 Jy ! Component: 1950 - total flux cleaned = -0.00036938 Jy ! Component: 2000 - total flux cleaned = -0.000353879 Jy ! Component: 2050 - total flux cleaned = -0.00037704 Jy ! Component: 2100 - total flux cleaned = -0.000400172 Jy ! Component: 2150 - total flux cleaned = -0.000400172 Jy ! Component: 2200 - total flux cleaned = -0.000423093 Jy ! Component: 2250 - total flux cleaned = -0.000430651 Jy ! Component: 2300 - total flux cleaned = -0.000438211 Jy ! Component: 2350 - total flux cleaned = -0.000445709 Jy ! Component: 2400 - total flux cleaned = -0.000453245 Jy ! Component: 2450 - total flux cleaned = -0.000445761 Jy ! Component: 2500 - total flux cleaned = -0.000460583 Jy ! Component: 2550 - total flux cleaned = -0.000490152 Jy ! Component: 2600 - total flux cleaned = -0.000497541 Jy ! Component: 2650 - total flux cleaned = -0.000504807 Jy ! Component: 2700 - total flux cleaned = -0.000512083 Jy ! Component: 2750 - total flux cleaned = -0.000512026 Jy ! Component: 2800 - total flux cleaned = -0.000526496 Jy ! Component: 2850 - total flux cleaned = -0.000497578 Jy ! Component: 2900 - total flux cleaned = -0.000490405 Jy ! Component: 2950 - total flux cleaned = -0.00054059 Jy ! Component: 3000 - total flux cleaned = -0.000533442 Jy ! Component: 3050 - total flux cleaned = -0.000504977 Jy ! Component: 3100 - total flux cleaned = -0.000512083 Jy ! Component: 3150 - total flux cleaned = -0.000512126 Jy ! Component: 3200 - total flux cleaned = -0.000533202 Jy ! Component: 3250 - total flux cleaned = -0.000519207 Jy ! Component: 3300 - total flux cleaned = -0.000540132 Jy ! Component: 3350 - total flux cleaned = -0.000561015 Jy ! Component: 3400 - total flux cleaned = -0.000561001 Jy ! Component: 3450 - total flux cleaned = -0.000567884 Jy ! Component: 3500 - total flux cleaned = -0.000560984 Jy ! Component: 3550 - total flux cleaned = -0.00055414 Jy ! Component: 3600 - total flux cleaned = -0.000547351 Jy ! Component: 3650 - total flux cleaned = -0.000554179 Jy ! Component: 3700 - total flux cleaned = -0.000574573 Jy ! Component: 3750 - total flux cleaned = -0.000601627 Jy ! Component: 3800 - total flux cleaned = -0.00059483 Jy ! Component: 3850 - total flux cleaned = -0.000608297 Jy ! Component: 3900 - total flux cleaned = -0.000628385 Jy ! Component: 3950 - total flux cleaned = -0.000594968 Jy ! Component: 4000 - total flux cleaned = -0.000601636 Jy ! Component: 4050 - total flux cleaned = -0.000628154 Jy ! Total flux subtracted in 4096 components = -0.00060167 Jy ! Clean residual min=-0.000377 max=0.000331 Jy/beam ! Clean residual mean=0.000000 rms=0.000115 Jy/beam ! Combined flux in latest and established models = 0.13598 Jy keep ! Adding 347 model components to the UV plane model. ! The established model now contains 516 components and 0.135979 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uvm//J2114+8204_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.055 x 1.432 at -16.82 degrees (North through East) ! Clean map min=-0.00053154 max=0.091728 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uvm//J2114+8204_X_a_map.fits wmodel /image_prod/ug002_uvm//J2114+8204_X_a_map.mod ! Writing 516 model components to file: /image_prod/ug002_uvm//J2114+8204_X_a_map.mod wobs /image_prod/ug002_uvm//J2114+8204_X_a_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uvm//J2114+8204_X_a_uvs.fits wwins /image_prod/ug002_uvm//J2114+8204_X_a_map.win ! wwins: Wrote 10 windows to /image_prod/ug002_uvm//J2114+8204_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0917278 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000115167 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.376657 0.376657 0.753315 1.50663 3.01326 6.02652 12.053 24.1061 48.2121 96.4243 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.091 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 796.479 quit ! Quitting program ! Log file /image_prod/ug002_uvm//J2114+8204_X_a_dfm.log closed on Wed Mar 4 17:42:30 2020