! Started logfile: /image_prod/ug002_uvm//J2108+1430_S_a_dfm.log on Wed Mar  4 17:41:57 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uvm//J2108+1430_S_a_uvm.fits
! Reading UV FITS file: /image_prod/ug002_uvm//J2108+1430_S_a_uvm.fits
! AN table 1: 18 integrations on 28 of 28 possible baselines.
! AN table 2: 6 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.833333 visibilities/baseline/integration-bin.
! Found source: J2108+1430
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 1800 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2108+1430_S_a]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 14 telescope corrections were flagged in sub-array 1.
!  A total of 3 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 14 telescope corrections were flagged in sub-array 1.
!  A total of 3 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 14 telescope corrections were flagged in sub-array 1.
!  A total of 3 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.147172Jy  sigma=9.793214
! Fit after  self-cal, rms=0.476558Jy  sigma=4.417887
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.537 mas, bmaj=9.233 mas, bpa=-17.55 degrees
! Estimated noise=2.49724 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.406211 Jy
! Component: 100  -  total flux cleaned = 0.494822 Jy
! Total flux subtracted in 100 components = 0.494822 Jy
! Clean residual min=-0.018180 max=0.024785 Jy/beam
! Clean residual mean=-0.000054 rms=0.005276 Jy/beam
! Combined flux in latest and established models = 0.494822 Jy
! Performing phase self-cal
! Adding 2 model components to the UV plane model.
! The established model now contains 2 components and 0.494822 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.127994Jy  sigma=0.921700
! Fit after  self-cal, rms=0.127998Jy  sigma=0.921626
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.184 mas, bmaj=9.827 mas, bpa=-15.92 degrees
! Estimated noise=2.0912 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0225632 Jy
! Component: 100  -  total flux cleaned = 0.0305428 Jy
! Component: 150  -  total flux cleaned = 0.0320643 Jy
! Component: 200  -  total flux cleaned = 0.0327919 Jy
! Total flux subtracted in 200 components = 0.0327919 Jy
! Clean residual min=-0.021850 max=0.020526 Jy/beam
! Clean residual mean=0.000018 rms=0.005186 Jy/beam
! Combined flux in latest and established models = 0.527614 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 37 components and 0.527614 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.120600Jy  sigma=0.917886
! Fit after  self-cal, rms=0.120642Jy  sigma=0.917604
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.184 x 9.827 at -15.92 degrees (North through East)
! Clean map  min=-0.021735  max=0.52201 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.91     FD        0.84     HN        1.00     KP        0.94     
!   LA        0.98     MK        1.09     NL        1.04     OV        0.94     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.07     FD        1.03     HN        1.03     KP        1.02     
!   LA        1.03     NL        1.18     OV        1.07     PT        1.03     
!   SC        1.07     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.89     FD        0.82     HN        0.96     KP        0.94     
!   LA        0.99     MK        1.08     NL        0.95     OV        0.82     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.46     FD        1.04     HN        1.07     KP        1.04     
!   LA        1.02     NL        1.41     OV        1.01     PT        1.02     
!   SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.88     FD        0.83     HN        0.95     KP        0.95     
!   LA        1.02     MK        1.08     NL        1.02     OV        0.95     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.06     FD        1.07     HN        1.02     KP        1.04     
!   LA        1.01     NL        1.18     OV        1.02     PT        1.02     
!   SC        1.08     
! 
! 
! Fit before self-cal, rms=0.120642Jy  sigma=0.917604
! Fit after  self-cal, rms=0.084570Jy  sigma=0.588497
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.197 mas, bmaj=9.911 mas, bpa=-16.03 degrees
! Estimated noise=2.08818 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00382419 Jy
! Component: 100  -  total flux cleaned = 0.00376173 Jy
! Component: 150  -  total flux cleaned = 0.00364488 Jy
! Component: 200  -  total flux cleaned = 0.00343786 Jy
! Total flux subtracted in 200 components = 0.00343786 Jy
! Clean residual min=-0.007022 max=0.007492 Jy/beam
! Clean residual mean=0.000015 rms=0.001752 Jy/beam
! Combined flux in latest and established models = 0.531052 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 48 components and 0.531052 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.084277Jy  sigma=0.586981
! Fit after  self-cal, rms=0.084397Jy  sigma=0.586475
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.084397Jy  sigma=0.586475
! Fit after  self-cal, rms=0.074600Jy  sigma=0.540705
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.185 mas, bmaj=9.917 mas, bpa=-16.16 degrees
! Estimated noise=2.09071 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00173277 Jy
! Component: 100  -  total flux cleaned = 0.0018068 Jy
! Component: 150  -  total flux cleaned = 0.00186183 Jy
! Component: 200  -  total flux cleaned = 0.00176488 Jy
! Total flux subtracted in 200 components = 0.00176488 Jy
! Clean residual min=-0.004745 max=0.004758 Jy/beam
! Clean residual mean=0.000011 rms=0.001160 Jy/beam
! Combined flux in latest and established models = 0.532816 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 59 components and 0.532816 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.074410Jy  sigma=0.539904
! Fit after  self-cal, rms=0.074395Jy  sigma=0.539673
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.02676e-05 Jy
! Component: 100  -  total flux cleaned = -7.86077e-05 Jy
! Component: 150  -  total flux cleaned = -0.00020264 Jy
! Component: 200  -  total flux cleaned = -0.000356582 Jy
! Total flux subtracted in 200 components = -0.000356582 Jy
! Clean residual min=-0.004647 max=0.004756 Jy/beam
! Clean residual mean=0.000009 rms=0.001151 Jy/beam
! Combined flux in latest and established models = 0.53246 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 63 components and 0.53246 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.074297Jy  sigma=0.539307
! Fit after  self-cal, rms=0.074292Jy  sigma=0.539183
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.074292Jy  sigma=0.539183
! Fit after  self-cal, rms=0.074361Jy  sigma=0.538364
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.178 mas, bmaj=9.927 mas, bpa=-16.23 degrees
! Estimated noise=2.09136 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00114568 Jy
! Component: 100  -  total flux cleaned = 0.00104169 Jy
! Component: 150  -  total flux cleaned = 0.000999095 Jy
! Component: 200  -  total flux cleaned = 0.000876835 Jy
! Total flux subtracted in 200 components = 0.000876835 Jy
! Clean residual min=-0.004509 max=0.004689 Jy/beam
! Clean residual mean=0.000008 rms=0.001128 Jy/beam
! Combined flux in latest and established models = 0.533337 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 71 components and 0.533337 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.074256Jy  sigma=0.537945
! Fit after  self-cal, rms=0.074260Jy  sigma=0.537876
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.10912e-07 Jy
! Component: 100  -  total flux cleaned = -7.23833e-05 Jy
! Component: 150  -  total flux cleaned = -0.000141153 Jy
! Component: 200  -  total flux cleaned = -0.000239458 Jy
! Total flux subtracted in 200 components = -0.000239458 Jy
! Clean residual min=-0.004430 max=0.004687 Jy/beam
! Clean residual mean=0.000007 rms=0.001123 Jy/beam
! Combined flux in latest and established models = 0.533097 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 76 components and 0.533097 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.074200Jy  sigma=0.537696
! Fit after  self-cal, rms=0.074197Jy  sigma=0.537651
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.074197Jy  sigma=0.537651
! Fit after  self-cal, rms=0.074383Jy  sigma=0.537482
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.177 mas, bmaj=11.07 mas, bpa=-11.32 degrees
! Estimated noise=2.25528 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000245796 Jy
! Component: 100  -  total flux cleaned = 0.000248436 Jy
! Component: 150  -  total flux cleaned = 0.000223238 Jy
! Component: 200  -  total flux cleaned = 0.000185089 Jy
! Total flux subtracted in 200 components = 0.000185089 Jy
! Clean residual min=-0.004478 max=0.005009 Jy/beam
! Clean residual mean=0.000011 rms=0.001296 Jy/beam
! Combined flux in latest and established models = 0.533282 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 83 components and 0.533282 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.074356Jy  sigma=0.537396
! Fit after  self-cal, rms=0.074369Jy  sigma=0.537388
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.98642e-06 Jy
! Component: 100  -  total flux cleaned = -7.085e-05 Jy
! Component: 150  -  total flux cleaned = -8.16246e-05 Jy
! Component: 200  -  total flux cleaned = -0.000109592 Jy
! Total flux subtracted in 200 components = -0.000109592 Jy
! Clean residual min=-0.004465 max=0.005005 Jy/beam
! Clean residual mean=0.000011 rms=0.001294 Jy/beam
! Combined flux in latest and established models = 0.533172 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 88 components and 0.533172 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.074358Jy  sigma=0.537386
! Fit after  self-cal, rms=0.074357Jy  sigma=0.537383
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.172 mas, bmaj=9.937 mas, bpa=-16.28 degrees
! Estimated noise=2.0922 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.172 x 9.937 at -16.28 degrees (North through East)
! Clean map  min=-0.0042902  max=0.52125 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.074357Jy  sigma=0.537383
! Fit after  self-cal, rms=0.105702Jy  sigma=0.482823
! Inverting map and beam 
! Estimated beam: bmin=4.171 mas, bmaj=9.943 mas, bpa=-16.31 degrees
! Estimated noise=2.09256 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000294287 Jy
! Component: 100  -  total flux cleaned = 0.000217388 Jy
! Component: 150  -  total flux cleaned = 0.000146645 Jy
! Component: 200  -  total flux cleaned = 7.99374e-05 Jy
! Total flux subtracted in 200 components = 7.99374e-05 Jy
! Clean residual min=-0.004566 max=0.004458 Jy/beam
! Clean residual mean=0.000003 rms=0.001090 Jy/beam
! Combined flux in latest and established models = 0.533252 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 92 components and 0.533252 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.105626Jy  sigma=0.482577
! Fit after  self-cal, rms=0.105626Jy  sigma=0.482544
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.67802e-07 Jy
! Component: 100  -  total flux cleaned = 3.1102e-05 Jy
! Component: 150  -  total flux cleaned = 3.07853e-05 Jy
! Component: 200  -  total flux cleaned = 5.82508e-05 Jy
! Total flux subtracted in 200 components = 5.82508e-05 Jy
! Clean residual min=-0.004582 max=0.004452 Jy/beam
! Clean residual mean=0.000004 rms=0.001088 Jy/beam
! Combined flux in latest and established models = 0.533311 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 96 components and 0.533311 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.105564Jy  sigma=0.482423
! Fit after  self-cal, rms=0.105554Jy  sigma=0.482402
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.105554Jy  sigma=0.482402
! Fit after  self-cal, rms=0.105295Jy  sigma=0.482353
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.529 mas, bmaj=9.376 mas, bpa=-17.88 degrees
! Estimated noise=2.49128 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.405147 Jy
! Component: 100  -  total flux cleaned = 0.493628 Jy
! Component: 150  -  total flux cleaned = 0.517279 Jy
! Component: 200  -  total flux cleaned = 0.522933 Jy
! Total flux subtracted in 200 components = 0.522933 Jy
! Clean residual min=-0.005526 max=0.006218 Jy/beam
! Clean residual mean=-0.000017 rms=0.001417 Jy/beam
! Combined flux in latest and established models = 0.522933 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.522933 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.167 mas, bmaj=9.948 mas, bpa=-16.33 degrees
! Estimated noise=2.09293 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00437608 Jy
! Component: 100  -  total flux cleaned = 0.00580256 Jy
! Component: 150  -  total flux cleaned = 0.0068042 Jy
! Component: 200  -  total flux cleaned = 0.00763364 Jy
! Total flux subtracted in 200 components = 0.00763364 Jy
! Clean residual min=-0.004636 max=0.004534 Jy/beam
! Clean residual mean=-0.000005 rms=0.001105 Jy/beam
! Combined flux in latest and established models = 0.530567 Jy
! Adding 30 model components to the UV plane model.
! The established model now contains 41 components and 0.530567 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.172 mas, bmaj=11.07 mas, bpa=-11.45 degrees
! Estimated noise=2.25734 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00157413 Jy
! Component: 100  -  total flux cleaned = 0.0023269 Jy
! Component: 150  -  total flux cleaned = 0.00273846 Jy
! Component: 200  -  total flux cleaned = 0.00280665 Jy
! Total flux subtracted in 200 components = 0.00280665 Jy
! Clean residual min=-0.004399 max=0.004910 Jy/beam
! Clean residual mean=0.000007 rms=0.001253 Jy/beam
! Combined flux in latest and established models = 0.533374 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.08587e-05 Jy
! Component: 100  -  total flux cleaned = 3.05974e-05 Jy
! Component: 150  -  total flux cleaned = 3.08762e-05 Jy
! Component: 200  -  total flux cleaned = 3.99724e-05 Jy
! Total flux subtracted in 200 components = 3.99724e-05 Jy
! Clean residual min=-0.004411 max=0.004905 Jy/beam
! Clean residual mean=0.000007 rms=0.001252 Jy/beam
! Combined flux in latest and established models = 0.533414 Jy
! Adding 30 model components to the UV plane model.
! The established model now contains 67 components and 0.533414 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.167 mas, bmaj=9.948 mas, bpa=-16.33 degrees
! Estimated noise=2.09293 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000530666 Jy
! Component: 100  -  total flux cleaned = -0.000302967 Jy
! Component: 150  -  total flux cleaned = -5.58561e-05 Jy
! Component: 200  -  total flux cleaned = -5.702e-05 Jy
! Total flux subtracted in 200 components = -5.702e-05 Jy
! Clean residual min=-0.004592 max=0.004471 Jy/beam
! Clean residual mean=0.000003 rms=0.001090 Jy/beam
! Combined flux in latest and established models = 0.533357 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 72 components and 0.533357 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.105129Jy  sigma=0.482599
! Fit after  self-cal, rms=0.104955Jy  sigma=0.482428
wmodel J2108+1430_S_a_map.mod
! Writing 72 model components to file: J2108+1430_S_a_map.mod
wobs   J2108+1430_S_a_uvs.fits
! Writing UV FITS file: J2108+1430_S_a_uvs.fits
wwins  J2108+1430_S_a_map.win
! wwins: Wrote 1 windows to J2108+1430_S_a_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000412936 Jy
! Component: 100  -  total flux cleaned = 0.000565998 Jy
! Component: 150  -  total flux cleaned = 0.000709593 Jy
! Component: 200  -  total flux cleaned = 0.000911532 Jy
! Component: 250  -  total flux cleaned = 0.00122931 Jy
! Component: 300  -  total flux cleaned = 0.00171859 Jy
! Component: 350  -  total flux cleaned = 0.00201549 Jy
! Component: 400  -  total flux cleaned = 0.002359 Jy
! Component: 450  -  total flux cleaned = 0.00274818 Jy
! Component: 500  -  total flux cleaned = 0.00296424 Jy
! Component: 550  -  total flux cleaned = 0.00328274 Jy
! Component: 600  -  total flux cleaned = 0.00354146 Jy
! Component: 650  -  total flux cleaned = 0.00384549 Jy
! Component: 700  -  total flux cleaned = 0.00409418 Jy
! Component: 750  -  total flux cleaned = 0.0043386 Jy
! Component: 800  -  total flux cleaned = 0.00467371 Jy
! Component: 850  -  total flux cleaned = 0.00495502 Jy
! Component: 900  -  total flux cleaned = 0.00500039 Jy
! Component: 950  -  total flux cleaned = 0.00522783 Jy
! Component: 1000  -  total flux cleaned = 0.00540624 Jy
! Component: 1050  -  total flux cleaned = 0.00553777 Jy
! Component: 1100  -  total flux cleaned = 0.00553765 Jy
! Component: 1150  -  total flux cleaned = 0.00562318 Jy
! Component: 1200  -  total flux cleaned = 0.00570646 Jy
! Component: 1250  -  total flux cleaned = 0.0057072 Jy
! Component: 1300  -  total flux cleaned = 0.00587106 Jy
! Component: 1350  -  total flux cleaned = 0.00591168 Jy
! Component: 1400  -  total flux cleaned = 0.00603218 Jy
! Component: 1450  -  total flux cleaned = 0.00615152 Jy
! Component: 1500  -  total flux cleaned = 0.00638529 Jy
! Component: 1550  -  total flux cleaned = 0.00646231 Jy
! Component: 1600  -  total flux cleaned = 0.00650016 Jy
! Component: 1650  -  total flux cleaned = 0.0066132 Jy
! Component: 1700  -  total flux cleaned = 0.00676241 Jy
! Component: 1750  -  total flux cleaned = 0.00676211 Jy
! Component: 1800  -  total flux cleaned = 0.00698085 Jy
! Component: 1850  -  total flux cleaned = 0.00719715 Jy
! Component: 1900  -  total flux cleaned = 0.00723266 Jy
! Component: 1950  -  total flux cleaned = 0.00730331 Jy
! Component: 2000  -  total flux cleaned = 0.00744345 Jy
! Component: 2050  -  total flux cleaned = 0.00761646 Jy
! Component: 2100  -  total flux cleaned = 0.00768531 Jy
! Component: 2150  -  total flux cleaned = 0.00792302 Jy
! Component: 2200  -  total flux cleaned = 0.00802394 Jy
! Component: 2250  -  total flux cleaned = 0.00819036 Jy
! Component: 2300  -  total flux cleaned = 0.00825632 Jy
! Component: 2350  -  total flux cleaned = 0.00838728 Jy
! Component: 2400  -  total flux cleaned = 0.00858192 Jy
! Component: 2450  -  total flux cleaned = 0.00880683 Jy
! Component: 2500  -  total flux cleaned = 0.00887031 Jy
! Component: 2550  -  total flux cleaned = 0.00906018 Jy
! Component: 2600  -  total flux cleaned = 0.00918524 Jy
! Component: 2650  -  total flux cleaned = 0.00918565 Jy
! Component: 2700  -  total flux cleaned = 0.00927817 Jy
! Component: 2750  -  total flux cleaned = 0.0092784 Jy
! Component: 2800  -  total flux cleaned = 0.00943037 Jy
! Component: 2850  -  total flux cleaned = 0.00946041 Jy
! Component: 2900  -  total flux cleaned = 0.00943045 Jy
! Component: 2950  -  total flux cleaned = 0.00954925 Jy
! Component: 3000  -  total flux cleaned = 0.00957923 Jy
! Component: 3050  -  total flux cleaned = 0.00963757 Jy
! Component: 3100  -  total flux cleaned = 0.00975368 Jy
! Component: 3150  -  total flux cleaned = 0.00978229 Jy
! Component: 3200  -  total flux cleaned = 0.00978234 Jy
! Component: 3250  -  total flux cleaned = 0.00986762 Jy
! Component: 3300  -  total flux cleaned = 0.00992379 Jy
! Component: 3350  -  total flux cleaned = 0.00997965 Jy
! Component: 3400  -  total flux cleaned = 0.00995179 Jy
! Component: 3450  -  total flux cleaned = 0.0100344 Jy
! Component: 3500  -  total flux cleaned = 0.0100069 Jy
! Component: 3550  -  total flux cleaned = 0.0100616 Jy
! Component: 3600  -  total flux cleaned = 0.0100342 Jy
! Component: 3650  -  total flux cleaned = 0.0100609 Jy
! Component: 3700  -  total flux cleaned = 0.0100607 Jy
! Component: 3750  -  total flux cleaned = 0.0100343 Jy
! Component: 3800  -  total flux cleaned = 0.0100342 Jy
! Component: 3850  -  total flux cleaned = 0.0100344 Jy
! Component: 3900  -  total flux cleaned = 0.0100604 Jy
! Component: 3950  -  total flux cleaned = 0.0101117 Jy
! Component: 4000  -  total flux cleaned = 0.0100861 Jy
! Component: 4050  -  total flux cleaned = 0.0101115 Jy
! Total flux subtracted in 4096 components = 0.010187 Jy
! Clean residual min=-0.001863 max=0.001422 Jy/beam
! Clean residual mean=-0.000001 rms=0.000471 Jy/beam
! Combined flux in latest and established models = 0.543544 Jy
keep
! Adding 258 model components to the UV plane model.
! The established model now contains 330 components and 0.543544 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uvm//J2108+1430_S_a_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.167 x 9.948 at -16.33 degrees (North through East)
! Clean map  min=-0.0031483  max=0.52188 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uvm//J2108+1430_S_a_map.fits
wmodel /image_prod/ug002_uvm//J2108+1430_S_a_map.mod
! Writing 330 model components to file: /image_prod/ug002_uvm//J2108+1430_S_a_map.mod
wobs   /image_prod/ug002_uvm//J2108+1430_S_a_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uvm//J2108+1430_S_a_uvs.fits
wwins  /image_prod/ug002_uvm//J2108+1430_S_a_map.win
! wwins: Wrote 2 windows to /image_prod/ug002_uvm//J2108+1430_S_a_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.521884 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000463321 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.266336 0.266336 0.532672 1.06534 2.13069 4.26137 8.52275 17.0455 34.091 68.182
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0013 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.521 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1126.4 
quit
! Quitting program
! Log file /image_prod/ug002_uvm//J2108+1430_S_a_dfm.log closed on Wed Mar  4 17:42:01 2020