! Started logfile: /image_prod/ug002_uvm//J2101+0341_S_b_dfm.log on Wed Mar  4 17:41:26 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uvm//J2101+0341_S_b_uvm.fits
! Reading UV FITS file: /image_prod/ug002_uvm//J2101+0341_S_b_uvm.fits
! AN table 1: 20 integrations on 6 of 6 possible baselines.
! AN table 2: 14 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.908213 visibilities/baseline/integration-bin.
! Found source: J2101+0341
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 1128 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2101+0341_S_b]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 4 telescope corrections were flagged in sub-array 1.
!  A total of 7 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 4 telescope corrections were flagged in sub-array 1.
!  A total of 7 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 4 telescope corrections were flagged in sub-array 1.
!  A total of 7 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.101270Jy  sigma=7.639398
! Fit after  self-cal, rms=0.519897Jy  sigma=3.665365
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.972 mas, bmaj=11.66 mas, bpa=30.58 degrees
! Estimated noise=3.92283 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.386784 Jy
! Component: 100  -  total flux cleaned = 0.478643 Jy
! Total flux subtracted in 100 components = 0.478643 Jy
! Clean residual min=-0.029423 max=0.044301 Jy/beam
! Clean residual mean=-0.000185 rms=0.009742 Jy/beam
! Combined flux in latest and established models = 0.478643 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.478643 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.179473Jy  sigma=0.955086
! Fit after  self-cal, rms=0.179469Jy  sigma=0.955031
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.246 mas, bmaj=12.06 mas, bpa=29.09 degrees
! Estimated noise=3.16538 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0410594 Jy
! Component: 100  -  total flux cleaned = 0.0627334 Jy
! Component: 150  -  total flux cleaned = 0.0707647 Jy
! Component: 200  -  total flux cleaned = 0.0732316 Jy
! Total flux subtracted in 200 components = 0.0732316 Jy
! Clean residual min=-0.022562 max=0.031031 Jy/beam
! Clean residual mean=0.000022 rms=0.006808 Jy/beam
! Combined flux in latest and established models = 0.551874 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 21 components and 0.551875 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.166014Jy  sigma=0.893670
! Fit after  self-cal, rms=0.166011Jy  sigma=0.893640
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.246 x 12.06 at 29.09 degrees (North through East)
! Clean map  min=-0.021764  max=0.47109 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.50     HN        0.99     NL        0.89     SC        0.98     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.08     FD        0.95     KP        0.98     LA        1.05     
!   NL        1.01     OV        0.93     PT        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.75     HN        1.01     NL        1.08     SC        0.82     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.11     FD        0.99     KP        0.98     LA        1.00     
!   NL        1.04     OV        0.94     PT        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.84     HN        0.99     NL        1.13     SC        1.02     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.08     FD        0.98     KP        1.01     LA        1.01     
!   NL        1.11     OV        0.91     PT        1.02     
! 
! 
! Fit before self-cal, rms=0.166011Jy  sigma=0.893640
! Fit after  self-cal, rms=0.107130Jy  sigma=0.571241
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.084 mas, bmaj=12.19 mas, bpa=29.36 degrees
! Estimated noise=3.14644 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00140138 Jy
! Component: 100  -  total flux cleaned = -0.00391571 Jy
! Component: 150  -  total flux cleaned = -0.00650034 Jy
! Component: 200  -  total flux cleaned = -0.008777 Jy
! Total flux subtracted in 200 components = -0.008777 Jy
! Clean residual min=-0.012915 max=0.014613 Jy/beam
! Clean residual mean=-0.000008 rms=0.003848 Jy/beam
! Combined flux in latest and established models = 0.543097 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 32 components and 0.543098 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.102690Jy  sigma=0.556434
! Fit after  self-cal, rms=0.102784Jy  sigma=0.555617
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.102784Jy  sigma=0.555617
! Fit after  self-cal, rms=0.106125Jy  sigma=0.498269
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.081 mas, bmaj=12.03 mas, bpa=29.24 degrees
! Estimated noise=3.1672 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000279862 Jy
! Component: 100  -  total flux cleaned = 0.0002872 Jy
! Component: 150  -  total flux cleaned = -0.000184082 Jy
! Component: 200  -  total flux cleaned = -0.000460756 Jy
! Total flux subtracted in 200 components = -0.000460756 Jy
! Clean residual min=-0.007060 max=0.007738 Jy/beam
! Clean residual mean=0.000016 rms=0.001971 Jy/beam
! Combined flux in latest and established models = 0.542637 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 62 components and 0.542637 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.105548Jy  sigma=0.492918
! Fit after  self-cal, rms=0.105602Jy  sigma=0.492853
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000254551 Jy
! Component: 100  -  total flux cleaned = -0.000599975 Jy
! Component: 150  -  total flux cleaned = -0.000912441 Jy
! Component: 200  -  total flux cleaned = -0.00119385 Jy
! Total flux subtracted in 200 components = -0.00119385 Jy
! Clean residual min=-0.006544 max=0.006734 Jy/beam
! Clean residual mean=0.000013 rms=0.001815 Jy/beam
! Combined flux in latest and established models = 0.541443 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 71 components and 0.541443 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.105393Jy  sigma=0.490722
! Fit after  self-cal, rms=0.105377Jy  sigma=0.490710
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.105377Jy  sigma=0.490710
! Fit after  self-cal, rms=0.107155Jy  sigma=0.489477
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.076 mas, bmaj=12 mas, bpa=29.14 degrees
! Estimated noise=3.16695 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000529518 Jy
! Component: 100  -  total flux cleaned = 0.00014468 Jy
! Component: 150  -  total flux cleaned = -7.97085e-05 Jy
! Component: 200  -  total flux cleaned = -0.000384882 Jy
! Total flux subtracted in 200 components = -0.000384882 Jy
! Clean residual min=-0.006026 max=0.005604 Jy/beam
! Clean residual mean=0.000014 rms=0.001577 Jy/beam
! Combined flux in latest and established models = 0.541058 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 78 components and 0.541058 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.106856Jy  sigma=0.487039
! Fit after  self-cal, rms=0.106846Jy  sigma=0.487028
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000184934 Jy
! Component: 100  -  total flux cleaned = -0.000431193 Jy
! Component: 150  -  total flux cleaned = -0.000651409 Jy
! Component: 200  -  total flux cleaned = -0.000852477 Jy
! Total flux subtracted in 200 components = -0.000852477 Jy
! Clean residual min=-0.005717 max=0.004935 Jy/beam
! Clean residual mean=0.000012 rms=0.001493 Jy/beam
! Combined flux in latest and established models = 0.540206 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 82 components and 0.540206 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.106729Jy  sigma=0.485980
! Fit after  self-cal, rms=0.106717Jy  sigma=0.485972
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.106717Jy  sigma=0.485972
! Fit after  self-cal, rms=0.108164Jy  sigma=0.485327
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.401 mas, bmaj=13.62 mas, bpa=17.18 degrees
! Estimated noise=3.45636 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000249348 Jy
! Component: 100  -  total flux cleaned = -0.000253726 Jy
! Component: 150  -  total flux cleaned = -0.000252781 Jy
! Component: 200  -  total flux cleaned = -0.000253649 Jy
! Total flux subtracted in 200 components = -0.000253649 Jy
! Clean residual min=-0.006035 max=0.005544 Jy/beam
! Clean residual mean=0.000018 rms=0.001564 Jy/beam
! Combined flux in latest and established models = 0.539952 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 98 components and 0.539952 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.108039Jy  sigma=0.484403
! Fit after  self-cal, rms=0.108029Jy  sigma=0.484388
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.58402e-05 Jy
! Component: 100  -  total flux cleaned = -0.000204723 Jy
! Component: 150  -  total flux cleaned = -0.000341373 Jy
! Component: 200  -  total flux cleaned = -0.000466236 Jy
! Total flux subtracted in 200 components = -0.000466236 Jy
! Clean residual min=-0.005855 max=0.005480 Jy/beam
! Clean residual mean=0.000017 rms=0.001544 Jy/beam
! Combined flux in latest and established models = 0.539486 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 105 components and 0.539486 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.107966Jy  sigma=0.483877
! Fit after  self-cal, rms=0.107962Jy  sigma=0.483874
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=5.072 mas, bmaj=11.98 mas, bpa=29.07 degrees
! Estimated noise=3.16497 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.072 x 11.98 at 29.07 degrees (North through East)
! Clean map  min=-0.0049907  max=0.47466 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.77 mas, bmaj=11.43 mas, bpa=30.09 degrees
! Estimated noise=3.98767 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.39045 Jy
! Component: 100  -  total flux cleaned = 0.475962 Jy
! Component: 150  -  total flux cleaned = 0.503442 Jy
! Component: 200  -  total flux cleaned = 0.518161 Jy
! Total flux subtracted in 200 components = 0.518161 Jy
! Clean residual min=-0.007809 max=0.009471 Jy/beam
! Clean residual mean=-0.000050 rms=0.002415 Jy/beam
! Combined flux in latest and established models = 0.518161 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 34 model components to the UV plane model.
! The established model now contains 34 components and 0.518161 Jy
! Inverting map and beam 
! Estimated beam: bmin=5.072 mas, bmaj=11.98 mas, bpa=29.07 degrees
! Estimated noise=3.16497 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00994023 Jy
! Component: 100  -  total flux cleaned = 0.0156199 Jy
! Component: 150  -  total flux cleaned = 0.0187851 Jy
! Component: 200  -  total flux cleaned = 0.0198687 Jy
! Total flux subtracted in 200 components = 0.0198687 Jy
! Clean residual min=-0.005617 max=0.005352 Jy/beam
! Clean residual mean=0.000004 rms=0.001519 Jy/beam
! Combined flux in latest and established models = 0.53803 Jy
! Adding 30 model components to the UV plane model.
! The established model now contains 60 components and 0.53803 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.401 mas, bmaj=13.62 mas, bpa=17.18 degrees
! Estimated noise=3.45636 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00141653 Jy
! Component: 100  -  total flux cleaned = 0.00179323 Jy
! Component: 150  -  total flux cleaned = 0.00192279 Jy
! Component: 200  -  total flux cleaned = 0.00209523 Jy
! Total flux subtracted in 200 components = 0.00209523 Jy
! Clean residual min=-0.005938 max=0.006236 Jy/beam
! Clean residual mean=0.000015 rms=0.001604 Jy/beam
! Combined flux in latest and established models = 0.540125 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.84682e-05 Jy
! Component: 100  -  total flux cleaned = 9.86369e-05 Jy
! Component: 150  -  total flux cleaned = 9.86544e-05 Jy
! Component: 200  -  total flux cleaned = 9.79619e-05 Jy
! Total flux subtracted in 200 components = 9.79619e-05 Jy
! Clean residual min=-0.005866 max=0.006164 Jy/beam
! Clean residual mean=0.000016 rms=0.001581 Jy/beam
! Combined flux in latest and established models = 0.540223 Jy
! Adding 24 model components to the UV plane model.
! The established model now contains 79 components and 0.540223 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=5.072 mas, bmaj=11.98 mas, bpa=29.07 degrees
! Estimated noise=3.16497 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000165655 Jy
! Component: 100  -  total flux cleaned = -4.29473e-05 Jy
! Component: 150  -  total flux cleaned = -9.33171e-05 Jy
! Component: 200  -  total flux cleaned = -0.000188578 Jy
! Total flux subtracted in 200 components = -0.000188578 Jy
! Clean residual min=-0.004950 max=0.005106 Jy/beam
! Clean residual mean=0.000011 rms=0.001353 Jy/beam
! Combined flux in latest and established models = 0.540035 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 85 components and 0.540035 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.107972Jy  sigma=0.483849
! Fit after  self-cal, rms=0.107990Jy  sigma=0.483800
wmodel J2101+0341_S_b_map.mod
! Writing 85 model components to file: J2101+0341_S_b_map.mod
wobs   J2101+0341_S_b_uvs.fits
! Writing UV FITS file: J2101+0341_S_b_uvs.fits
wwins  J2101+0341_S_b_map.win
! wwins: Wrote 1 windows to J2101+0341_S_b_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000595112 Jy
! Component: 100  -  total flux cleaned = -0.00154899 Jy
! Component: 150  -  total flux cleaned = -0.00213947 Jy
! Component: 200  -  total flux cleaned = -0.00269263 Jy
! Component: 250  -  total flux cleaned = -0.0031494 Jy
! Component: 300  -  total flux cleaned = -0.00358825 Jy
! Component: 350  -  total flux cleaned = -0.00376963 Jy
! Component: 400  -  total flux cleaned = -0.00406333 Jy
! Component: 450  -  total flux cleaned = -0.00434633 Jy
! Component: 500  -  total flux cleaned = -0.00451035 Jy
! Component: 550  -  total flux cleaned = -0.00456323 Jy
! Component: 600  -  total flux cleaned = -0.00456351 Jy
! Component: 650  -  total flux cleaned = -0.00461378 Jy
! Component: 700  -  total flux cleaned = -0.00446328 Jy
! Component: 750  -  total flux cleaned = -0.00436673 Jy
! Component: 800  -  total flux cleaned = -0.00441414 Jy
! Component: 850  -  total flux cleaned = -0.00431983 Jy
! Component: 900  -  total flux cleaned = -0.00413854 Jy
! Component: 950  -  total flux cleaned = -0.00391671 Jy
! Component: 1000  -  total flux cleaned = -0.00365555 Jy
! Component: 1050  -  total flux cleaned = -0.00344166 Jy
! Component: 1100  -  total flux cleaned = -0.00339933 Jy
! Component: 1150  -  total flux cleaned = -0.00323357 Jy
! Component: 1200  -  total flux cleaned = -0.00323297 Jy
! Component: 1250  -  total flux cleaned = -0.0031132 Jy
! Component: 1300  -  total flux cleaned = -0.00303497 Jy
! Component: 1350  -  total flux cleaned = -0.00303566 Jy
! Component: 1400  -  total flux cleaned = -0.00299792 Jy
! Component: 1450  -  total flux cleaned = -0.00299823 Jy
! Component: 1500  -  total flux cleaned = -0.00281458 Jy
! Component: 1550  -  total flux cleaned = -0.00277893 Jy
! Component: 1600  -  total flux cleaned = -0.00274326 Jy
! Component: 1650  -  total flux cleaned = -0.00260208 Jy
! Component: 1700  -  total flux cleaned = -0.00242886 Jy
! Component: 1750  -  total flux cleaned = -0.00236115 Jy
! Component: 1800  -  total flux cleaned = -0.00219314 Jy
! Component: 1850  -  total flux cleaned = -0.00222642 Jy
! Component: 1900  -  total flux cleaned = -0.00212803 Jy
! Component: 1950  -  total flux cleaned = -0.00203113 Jy
! Component: 2000  -  total flux cleaned = -0.0019358 Jy
! Component: 2050  -  total flux cleaned = -0.00190462 Jy
! Component: 2100  -  total flux cleaned = -0.00184203 Jy
! Component: 2150  -  total flux cleaned = -0.00178041 Jy
! Component: 2200  -  total flux cleaned = -0.00178059 Jy
! Component: 2250  -  total flux cleaned = -0.00178025 Jy
! Component: 2300  -  total flux cleaned = -0.00172102 Jy
! Component: 2350  -  total flux cleaned = -0.00169173 Jy
! Component: 2400  -  total flux cleaned = -0.00175006 Jy
! Component: 2450  -  total flux cleaned = -0.00183609 Jy
! Component: 2500  -  total flux cleaned = -0.00177908 Jy
! Component: 2550  -  total flux cleaned = -0.00180759 Jy
! Component: 2600  -  total flux cleaned = -0.00180746 Jy
! Component: 2650  -  total flux cleaned = -0.00180729 Jy
! Component: 2700  -  total flux cleaned = -0.00183452 Jy
! Component: 2750  -  total flux cleaned = -0.00180747 Jy
! Component: 2800  -  total flux cleaned = -0.00178102 Jy
! Component: 2850  -  total flux cleaned = -0.00180745 Jy
! Component: 2900  -  total flux cleaned = -0.00175513 Jy
! Component: 2950  -  total flux cleaned = -0.00172925 Jy
! Component: 3000  -  total flux cleaned = -0.0016777 Jy
! Component: 3050  -  total flux cleaned = -0.00165202 Jy
! Component: 3100  -  total flux cleaned = -0.00160159 Jy
! Component: 3150  -  total flux cleaned = -0.00150104 Jy
! Component: 3200  -  total flux cleaned = -0.00152602 Jy
! Component: 3250  -  total flux cleaned = -0.00145167 Jy
! Component: 3300  -  total flux cleaned = -0.00137788 Jy
! Component: 3350  -  total flux cleaned = -0.00137771 Jy
! Component: 3400  -  total flux cleaned = -0.00142618 Jy
! Component: 3450  -  total flux cleaned = -0.00149803 Jy
! Component: 3500  -  total flux cleaned = -0.00142634 Jy
! Component: 3550  -  total flux cleaned = -0.00152138 Jy
! Component: 3600  -  total flux cleaned = -0.00159207 Jy
! Component: 3650  -  total flux cleaned = -0.0016622 Jy
! Component: 3700  -  total flux cleaned = -0.00166216 Jy
! Component: 3750  -  total flux cleaned = -0.001639 Jy
! Component: 3800  -  total flux cleaned = -0.00175403 Jy
! Component: 3850  -  total flux cleaned = -0.00177675 Jy
! Component: 3900  -  total flux cleaned = -0.00182232 Jy
! Component: 3950  -  total flux cleaned = -0.00191303 Jy
! Component: 4000  -  total flux cleaned = -0.00195788 Jy
! Component: 4050  -  total flux cleaned = -0.00198038 Jy
! Total flux subtracted in 4096 components = -0.0020919 Jy
! Clean residual min=-0.001292 max=0.001158 Jy/beam
! Clean residual mean=0.000004 rms=0.000460 Jy/beam
! Combined flux in latest and established models = 0.537943 Jy
keep
! Adding 347 model components to the UV plane model.
! The established model now contains 432 components and 0.537942 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uvm//J2101+0341_S_b_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.072 x 11.98 at 29.07 degrees (North through East)
! Clean map  min=-0.0037974  max=0.48403 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uvm//J2101+0341_S_b_map.fits
wmodel /image_prod/ug002_uvm//J2101+0341_S_b_map.mod
! Writing 432 model components to file: /image_prod/ug002_uvm//J2101+0341_S_b_map.mod
wobs   /image_prod/ug002_uvm//J2101+0341_S_b_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uvm//J2101+0341_S_b_uvs.fits
wwins  /image_prod/ug002_uvm//J2101+0341_S_b_map.win
! wwins: Wrote 2 windows to /image_prod/ug002_uvm//J2101+0341_S_b_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.484034 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000454041 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.28141 0.28141 0.562821 1.12564 2.25128 4.50257 9.00513 18.0103 36.0205 72.0411
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0013 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.484 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1066.06 
quit
! Quitting program
! Log file /image_prod/ug002_uvm//J2101+0341_S_b_dfm.log closed on Wed Mar  4 17:41:29 2020