! Started logfile: /image_prod/ug002_uvm//J2048+4310_S_a_dfm.log on Wed Mar  4 17:40:47 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uvm//J2048+4310_S_a_uvm.fits
! Reading UV FITS file: /image_prod/ug002_uvm//J2048+4310_S_a_uvm.fits
! AN table 1: 292 integrations on 6 of 6 possible baselines.
! Apparent sampling: 0.662671 visibilities/baseline/integration-bin.
! Found source: J2048+4310
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 3483 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2048+4310_S_a]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 337 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 337 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 337 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.006161Jy  sigma=11.209222
! Fit after  self-cal, rms=0.927934Jy  sigma=10.417854
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=24.1 mas, bmaj=27.54 mas, bpa=-30.68 degrees
! Estimated noise=1.43232 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0346902 Jy
! Component: 100  -  total flux cleaned = 0.0292148 Jy
! Total flux subtracted in 100 components = 0.0292148 Jy
! Clean residual min=-0.019208 max=0.019260 Jy/beam
! Clean residual mean=-0.000147 rms=0.008951 Jy/beam
! Combined flux in latest and established models = 0.0292148 Jy
! Performing phase self-cal
! Adding 62 model components to the UV plane model.
! The established model now contains 62 components and 0.0292148 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.095187Jy  sigma=1.020517
! Fit after  self-cal, rms=0.094546Jy  sigma=1.012898
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=25.73 mas, bmaj=27.47 mas, bpa=27.77 degrees
! Estimated noise=1.10935 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00241345 Jy
! Component: 100  -  total flux cleaned = -0.00975062 Jy
! Component: 150  -  total flux cleaned = -0.0283368 Jy
! Component: 200  -  total flux cleaned = -0.041961 Jy
! Total flux subtracted in 200 components = -0.041961 Jy
! Clean residual min=-0.014241 max=0.014179 Jy/beam
! Clean residual mean=-0.000083 rms=0.008986 Jy/beam
! Combined flux in latest and established models = -0.0127462 Jy
! Performing phase self-cal
! Adding 168 model components to the UV plane model.
! The established model now contains 229 components and -0.0127462 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063453Jy  sigma=0.680483
! Fit after  self-cal, rms=0.063194Jy  sigma=0.677500
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 25.73 x 27.47 at 27.77 degrees (North through East)
! Clean map  min=-0.039055  max=0.069168 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 291 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.34     KP        1.61     LA        0.75     PT        0.76     
! 
! 
! Correcting IF 2.
!  A total of 291 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.42     KP        1.74     LA        0.84     PT        0.68     
! 
! 
! Correcting IF 3.
!  A total of 291 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.28     KP        1.80     LA        0.76     PT        0.75     
! 
! 
! Fit before self-cal, rms=0.063194Jy  sigma=0.677500
! Fit after  self-cal, rms=0.056097Jy  sigma=0.432184
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=27.61 mas, bmaj=28.93 mas, bpa=46.52 degrees
! Estimated noise=1.36382 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00411795 Jy
! Component: 100  -  total flux cleaned = -0.00275441 Jy
! Component: 150  -  total flux cleaned = -0.00180155 Jy
! Component: 200  -  total flux cleaned = -0.00147101 Jy
! Total flux subtracted in 200 components = -0.00147101 Jy
! Clean residual min=-0.002311 max=0.002335 Jy/beam
! Clean residual mean=-0.000042 rms=0.000963 Jy/beam
! Combined flux in latest and established models = -0.0142173 Jy
! Performing phase self-cal
! Adding 81 model components to the UV plane model.
! The established model now contains 310 components and -0.0142173 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.054278Jy  sigma=0.409585
! Fit after  self-cal, rms=0.054951Jy  sigma=0.406971
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.054951Jy  sigma=0.406971
! Fit after  self-cal, rms=0.055588Jy  sigma=0.400792
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=27.19 mas, bmaj=28.88 mas, bpa=44 degrees
! Estimated noise=1.34541 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000857406 Jy
! Component: 100  -  total flux cleaned = -0.000425547 Jy
! Component: 150  -  total flux cleaned = -0.000582692 Jy
! Component: 200  -  total flux cleaned = -0.000444569 Jy
! Total flux subtracted in 200 components = -0.000444569 Jy
! Clean residual min=-0.000685 max=0.000687 Jy/beam
! Clean residual mean=-0.000003 rms=0.000329 Jy/beam
! Combined flux in latest and established models = -0.0146618 Jy
selfcal
! Performing phase self-cal
! Adding 71 model components to the UV plane model.
! The established model now contains 381 components and -0.0146618 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.055424Jy  sigma=0.399456
! Fit after  self-cal, rms=0.055354Jy  sigma=0.398665
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.9269e-05 Jy
! Component: 100  -  total flux cleaned = -0.000144378 Jy
! Component: 150  -  total flux cleaned = -0.000317339 Jy
! Component: 200  -  total flux cleaned = -0.00067224 Jy
! Total flux subtracted in 200 components = -0.00067224 Jy
! Clean residual min=-0.000563 max=0.000555 Jy/beam
! Clean residual mean=-0.000004 rms=0.000252 Jy/beam
! Combined flux in latest and established models = -0.0153341 Jy
! Performing phase self-cal
! Adding 84 model components to the UV plane model.
! The established model now contains 460 components and -0.0153341 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.055276Jy  sigma=0.397873
! Fit after  self-cal, rms=0.055131Jy  sigma=0.397572
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.055131Jy  sigma=0.397572
! Fit after  self-cal, rms=0.059278Jy  sigma=0.396941
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=26.96 mas, bmaj=28.96 mas, bpa=44.08 degrees
! Estimated noise=1.3203 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000206185 Jy
! Component: 100  -  total flux cleaned = 2.92767e-05 Jy
! Component: 150  -  total flux cleaned = -0.000244728 Jy
! Component: 200  -  total flux cleaned = -0.00043134 Jy
! Total flux subtracted in 200 components = -0.00043134 Jy
! Clean residual min=-0.000427 max=0.000424 Jy/beam
! Clean residual mean=-0.000001 rms=0.000186 Jy/beam
! Combined flux in latest and established models = -0.0157654 Jy
selfcal
! Performing phase self-cal
! Adding 64 model components to the UV plane model.
! The established model now contains 523 components and -0.0157654 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059217Jy  sigma=0.396570
! Fit after  self-cal, rms=0.059303Jy  sigma=0.396305
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.14894e-05 Jy
! Component: 100  -  total flux cleaned = 0.000122535 Jy
! Component: 150  -  total flux cleaned = 0.000145213 Jy
! Component: 200  -  total flux cleaned = 0.000164487 Jy
! Total flux subtracted in 200 components = 0.000164487 Jy
! Clean residual min=-0.000329 max=0.000330 Jy/beam
! Clean residual mean=-0.000001 rms=0.000143 Jy/beam
! Combined flux in latest and established models = -0.0156009 Jy
! Performing phase self-cal
! Adding 70 model components to the UV plane model.
! The established model now contains 584 components and -0.0156009 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059276Jy  sigma=0.396018
! Fit after  self-cal, rms=0.059235Jy  sigma=0.395966
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059235Jy  sigma=0.395966
! Fit after  self-cal, rms=0.064543Jy  sigma=0.395583
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=26.95 mas, bmaj=29.28 mas, bpa=44.88 degrees
! Estimated noise=1.29264 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.34224e-05 Jy
! Component: 100  -  total flux cleaned = -9.55692e-05 Jy
! Component: 150  -  total flux cleaned = -0.000116206 Jy
! Component: 200  -  total flux cleaned = -0.000115922 Jy
! Total flux subtracted in 200 components = -0.000115922 Jy
! Clean residual min=-0.000296 max=0.000296 Jy/beam
! Clean residual mean=-0.000002 rms=0.000124 Jy/beam
! Combined flux in latest and established models = -0.0157168 Jy
selfcal
! Performing phase self-cal
! Adding 80 model components to the UV plane model.
! The established model now contains 660 components and -0.0157168 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064511Jy  sigma=0.395462
! Fit after  self-cal, rms=0.064628Jy  sigma=0.395330
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000291791 Jy
! Component: 100  -  total flux cleaned = 0.000227931 Jy
! Component: 150  -  total flux cleaned = 7.06721e-05 Jy
! Component: 200  -  total flux cleaned = -1.44462e-05 Jy
! Total flux subtracted in 200 components = -1.44462e-05 Jy
! Clean residual min=-0.000228 max=0.000226 Jy/beam
! Clean residual mean=-0.000001 rms=0.000097 Jy/beam
! Combined flux in latest and established models = -0.0157313 Jy
! Performing phase self-cal
! Adding 70 model components to the UV plane model.
! The established model now contains 726 components and -0.0157313 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064617Jy  sigma=0.395197
! Fit after  self-cal, rms=0.064607Jy  sigma=0.395165
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=26.76 mas, bmaj=29.07 mas, bpa=43.81 degrees
! Estimated noise=1.30147 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 26.76 x 29.07 at 43.81 degrees (North through East)
! Clean map  min=-0.023336  max=0.056399 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=26.19 mas, bmaj=26.66 mas, bpa=-23.67 degrees
! Estimated noise=1.86283 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0180687 Jy
! Component: 100  -  total flux cleaned = 0.00151594 Jy
! Component: 150  -  total flux cleaned = -0.00764814 Jy
! Component: 200  -  total flux cleaned = -0.00780404 Jy
! Total flux subtracted in 200 components = -0.00780404 Jy
! Clean residual min=-0.011807 max=0.011642 Jy/beam
! Clean residual mean=0.000148 rms=0.006469 Jy/beam
! Combined flux in latest and established models = -0.00780404 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 98 model components to the UV plane model.
! The established model now contains 98 components and -0.00780404 Jy
! Inverting map and beam 
! Estimated beam: bmin=26.76 mas, bmaj=29.07 mas, bpa=43.81 degrees
! Estimated noise=1.30147 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0014293 Jy
! Component: 100  -  total flux cleaned = -0.0106812 Jy
! Component: 150  -  total flux cleaned = -0.0207979 Jy
! Component: 200  -  total flux cleaned = -0.0282942 Jy
! Total flux subtracted in 200 components = -0.0282942 Jy
! Clean residual min=-0.006242 max=0.006172 Jy/beam
! Clean residual mean=0.000138 rms=0.003905 Jy/beam
! Combined flux in latest and established models = -0.0360982 Jy
! Adding 165 model components to the UV plane model.
! The established model now contains 262 components and -0.0360982 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=26.95 mas, bmaj=29.28 mas, bpa=44.88 degrees
! Estimated noise=1.29264 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00287938 Jy
! Component: 100  -  total flux cleaned = 0.000428022 Jy
! Component: 150  -  total flux cleaned = 0.000562874 Jy
! Component: 200  -  total flux cleaned = 0.00058265 Jy
! Total flux subtracted in 200 components = 0.00058265 Jy
! Clean residual min=-0.002025 max=0.002023 Jy/beam
! Clean residual mean=0.000061 rms=0.001231 Jy/beam
! Combined flux in latest and established models = -0.0355156 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000436599 Jy
! Component: 100  -  total flux cleaned = 0.00101803 Jy
! Component: 150  -  total flux cleaned = 0.00153429 Jy
! Component: 200  -  total flux cleaned = 0.00145447 Jy
! Total flux subtracted in 200 components = 0.00145447 Jy
! Clean residual min=-0.001258 max=0.001265 Jy/beam
! Clean residual mean=0.000045 rms=0.000565 Jy/beam
! Combined flux in latest and established models = -0.0340611 Jy
! Adding 226 model components to the UV plane model.
! The established model now contains 487 components and -0.0340611 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=26.76 mas, bmaj=29.07 mas, bpa=43.81 degrees
! Estimated noise=1.30147 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000787711 Jy
! Component: 100  -  total flux cleaned = 0.000879908 Jy
! Component: 150  -  total flux cleaned = 0.000882406 Jy
! Component: 200  -  total flux cleaned = 0.000735482 Jy
! Total flux subtracted in 200 components = 0.000735482 Jy
! Clean residual min=-0.000585 max=0.000582 Jy/beam
! Clean residual mean=0.000013 rms=0.000246 Jy/beam
! Combined flux in latest and established models = -0.0333256 Jy
selfcal
! Performing phase self-cal
! Adding 78 model components to the UV plane model.
! The established model now contains 562 components and -0.0333256 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064734Jy  sigma=0.396695
! Fit after  self-cal, rms=0.064711Jy  sigma=0.395820
wmodel J2048+4310_S_a_map.mod
! Writing 562 model components to file: J2048+4310_S_a_map.mod
wobs   J2048+4310_S_a_uvs.fits
! Writing UV FITS file: J2048+4310_S_a_uvs.fits
wwins  J2048+4310_S_a_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap   /image_prod/ug002_uvm//J2048+4310_S_a_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 26.76 x 29.07 at 43.81 degrees (North through East)
! Clean map  min=-0.017544  max=0.04476 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uvm//J2048+4310_S_a_map.fits
wmodel /image_prod/ug002_uvm//J2048+4310_S_a_map.mod
! Writing 562 model components to file: /image_prod/ug002_uvm//J2048+4310_S_a_map.mod
wobs   /image_prod/ug002_uvm//J2048+4310_S_a_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uvm//J2048+4310_S_a_uvs.fits
wwins  /image_prod/ug002_uvm//J2048+4310_S_a_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
! 
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0447603 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000229541 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.53847 1.53847 3.07694 6.15389 12.3078 24.6156 49.2311 98.4622
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.044 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  194.998 
quit
! Quitting program
! Log file /image_prod/ug002_uvm//J2048+4310_S_a_dfm.log closed on Wed Mar  4 17:40:50 2020