! Started logfile: /image_prod/ug002_uvm//J2040+4527_X_a_dfm.log on Wed Mar 4 17:40:22 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uvm//J2040+4527_X_a_uvm.fits ! Reading UV FITS file: /image_prod/ug002_uvm//J2040+4527_X_a_uvm.fits ! AN table 1: 60 integrations on 36 of 36 possible baselines. ! AN table 2: 155 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.821346 visibilities/baseline/integration-bin. ! Found source: J2040+4527 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 121 lines of history. ! ! Reading 90036 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J2040+4527_X_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 40 telescope corrections were flagged in sub-array 1. ! A total of 150 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 40 telescope corrections were flagged in sub-array 1. ! A total of 150 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 40 telescope corrections were flagged in sub-array 1. ! A total of 150 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 40 telescope corrections were flagged in sub-array 1. ! A total of 150 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 40 telescope corrections were flagged in sub-array 1. ! A total of 150 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 40 telescope corrections were flagged in sub-array 1. ! A total of 150 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 40 telescope corrections were flagged in sub-array 1. ! A total of 150 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 40 telescope corrections were flagged in sub-array 1. ! A total of 150 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 9. ! A total of 40 telescope corrections were flagged in sub-array 1. ! A total of 150 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 10. ! A total of 40 telescope corrections were flagged in sub-array 1. ! A total of 150 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 11. ! A total of 40 telescope corrections were flagged in sub-array 1. ! A total of 150 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 12. ! A total of 40 telescope corrections were flagged in sub-array 1. ! A total of 150 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.003825Jy sigma=9.656800 ! Fit after self-cal, rms=0.946437Jy sigma=9.064902 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7282 mas, bmaj=1.043 mas, bpa=-15.67 degrees ! Estimated noise=0.658796 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0330192 Jy ! Component: 100 - total flux cleaned = 0.0485018 Jy ! Total flux subtracted in 100 components = 0.0485018 Jy ! Clean residual min=-0.002736 max=0.008494 Jy/beam ! Clean residual mean=0.000014 rms=0.000794 Jy/beam ! Combined flux in latest and established models = 0.0485018 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.0485018 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059497Jy sigma=0.555028 ! Fit after self-cal, rms=0.058626Jy sigma=0.547353 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0109378 Jy ! Component: 100 - total flux cleaned = 0.0183926 Jy ! Total flux subtracted in 100 components = 0.0183926 Jy ! Clean residual min=-0.002112 max=0.005005 Jy/beam ! Clean residual mean=0.000010 rms=0.000571 Jy/beam ! Combined flux in latest and established models = 0.0668944 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 35 components and 0.0668943 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054362Jy sigma=0.497481 ! Fit after self-cal, rms=0.054321Jy sigma=0.497109 ! Inverting map ! Added new window around map position (1, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00605889 Jy ! Component: 100 - total flux cleaned = 0.0104708 Jy ! Total flux subtracted in 100 components = 0.0104708 Jy ! Clean residual min=-0.001884 max=0.003791 Jy/beam ! Clean residual mean=0.000008 rms=0.000489 Jy/beam ! Combined flux in latest and established models = 0.0773651 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 52 components and 0.0773651 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052848Jy sigma=0.479289 ! Fit after self-cal, rms=0.052824Jy sigma=0.479063 ! Inverting map ! Added new window around map position (-1, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00393628 Jy ! Component: 100 - total flux cleaned = 0.00696416 Jy ! Total flux subtracted in 100 components = 0.00696416 Jy ! Clean residual min=-0.001869 max=0.002629 Jy/beam ! Clean residual mean=0.000006 rms=0.000450 Jy/beam ! Combined flux in latest and established models = 0.0843293 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 61 components and 0.0843293 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052168Jy sigma=0.471078 ! Fit after self-cal, rms=0.052164Jy sigma=0.471017 ! Inverting map ! Added new window around map position (0.2, -1.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0028658 Jy ! Component: 100 - total flux cleaned = 0.00505713 Jy ! Total flux subtracted in 100 components = 0.00505713 Jy ! Clean residual min=-0.001755 max=0.001879 Jy/beam ! Clean residual mean=0.000005 rms=0.000429 Jy/beam ! Combined flux in latest and established models = 0.0893864 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 78 components and 0.0893864 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051833Jy sigma=0.466968 ! Fit after self-cal, rms=0.051828Jy sigma=0.466892 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9788 mas, bmaj=1.431 mas, bpa=-15.66 degrees ! Estimated noise=0.248726 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00425893 Jy ! Component: 100 - total flux cleaned = 0.00735755 Jy ! Component: 150 - total flux cleaned = 0.00969705 Jy ! Component: 200 - total flux cleaned = 0.0114904 Jy ! Total flux subtracted in 200 components = 0.0114904 Jy ! Clean residual min=-0.001231 max=0.001700 Jy/beam ! Clean residual mean=0.000006 rms=0.000362 Jy/beam ! Combined flux in latest and established models = 0.100877 Jy ! Performing phase self-cal ! Adding 54 model components to the UV plane model. ! The established model now contains 119 components and 0.100877 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051391Jy sigma=0.461793 ! Fit after self-cal, rms=0.051386Jy sigma=0.461687 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9788 x 1.431 at -15.66 degrees (North through East) ! Clean map min=-0.0011668 max=0.050025 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 HN 0.95 KP 1.04 LA 1.04 ! MK 1.14 NL 1.19 OV 0.86 PT 0.84 ! SC 1.19 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.07 FD 1.01 HN 0.96 KP 1.00 ! LA 0.96 MK 1.18 NL 1.02 OV 0.99 ! PT 0.99 SC 1.05 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 HN 0.83 KP 1.06 LA 1.00 ! MK 1.00 NL 1.20 OV 0.87 PT 0.87 ! SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.05 FD 1.02 HN 0.92 KP 1.02 ! LA 0.97 MK 1.18 NL 1.03 OV 0.98 ! PT 0.98 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 HN 0.94 KP 1.03 LA 1.01 ! MK 1.08 NL 1.18 OV 0.88 PT 0.90 ! SC 1.13 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.07 FD 0.99 HN 0.95 KP 0.99 ! LA 0.97 MK 1.13 NL 1.05 OV 0.99 ! PT 0.99 SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 HN 0.92 KP 1.06 LA 1.01 ! MK 1.03 NL 1.23 OV 0.87 PT 0.88 ! SC 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 0.99 HN 0.92 KP 0.98 ! LA 0.98 MK 1.14 NL 1.01 OV 0.99 ! PT 0.97 SC 1.01 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 HN 0.92 KP 1.05 LA 0.99 ! MK 1.01 NL 1.18 OV 0.92 PT 0.91 ! SC 0.95 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 0.99 HN 0.91 KP 1.00 ! LA 0.97 MK 1.03 NL 1.02 OV 1.01 ! PT 0.99 SC 0.98 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 HN 0.82 KP 1.04 LA 1.00 ! MK 1.13 NL 1.17 OV 0.90 PT 0.89 ! SC 1.17 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.04 FD 0.98 HN 0.90 KP 0.97 ! LA 0.97 MK 1.05 NL 1.01 OV 0.99 ! PT 0.99 SC 0.96 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 HN 0.85 KP 1.01 LA 1.01 ! MK 1.17 NL 1.18 OV 0.93 PT 0.91 ! SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 1.00 HN 0.94 KP 0.98 ! LA 0.96 MK 1.03 NL 0.98 OV 1.00 ! PT 0.99 SC 1.01 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 HN 0.84 KP 1.03 LA 1.00 ! MK 0.95 NL 1.17 OV 0.87 PT 0.91 ! SC 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.07 FD 0.98 HN 0.91 KP 0.98 ! LA 0.97 MK 1.05 NL 1.02 OV 0.98 ! PT 0.99 SC 0.96 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 HN 0.82 KP 0.98 LA 0.97 ! MK 1.00 NL 1.21 OV 0.89 PT 0.88 ! SC 0.93 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.04 FD 0.98 HN 0.89 KP 0.99 ! LA 0.97 MK 1.00 NL 1.00 OV 0.99 ! PT 1.00 SC 0.96 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 HN 0.86 KP 1.00 LA 0.97 ! MK 0.94 NL 1.22 OV 0.91 PT 0.90 ! SC 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 0.99 HN 0.87 KP 1.02 ! LA 0.98 MK 0.95 NL 1.11 OV 1.01 ! PT 1.00 SC 0.90 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 HN 0.92 KP 1.00 LA 1.02 ! MK 0.98 NL 1.17 OV 0.87 PT 0.90 ! SC 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 1.00 HN 0.85 KP 0.99 ! LA 0.95 MK 0.84 NL 0.97 OV 0.99 ! PT 0.97 SC 0.97 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 HN 0.82 KP 0.99 LA 1.02 ! MK 1.01 NL 1.19 OV 0.87 PT 0.88 ! SC 0.93 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.04 FD 0.99 HN 0.87 KP 1.00 ! LA 0.97 MK 0.89 NL 0.97 OV 0.98 ! PT 0.99 SC 0.95 ! ! ! Fit before self-cal, rms=0.051386Jy sigma=0.461687 ! Fit after self-cal, rms=0.049433Jy sigma=0.458994 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9822 mas, bmaj=1.431 mas, bpa=-15.95 degrees ! Estimated noise=0.243287 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000991137 Jy ! Component: 100 - total flux cleaned = 0.00124087 Jy ! Component: 150 - total flux cleaned = 0.00142201 Jy ! Component: 200 - total flux cleaned = 0.00153935 Jy ! Total flux subtracted in 200 components = 0.00153935 Jy ! Clean residual min=-0.001152 max=0.001321 Jy/beam ! Clean residual mean=0.000006 rms=0.000301 Jy/beam ! Combined flux in latest and established models = 0.102416 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 130 components and 0.102416 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.049405Jy sigma=0.458728 ! Fit after self-cal, rms=0.049416Jy sigma=0.458601 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.049416Jy sigma=0.458601 ! Fit after self-cal, rms=0.049659Jy sigma=0.455260 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9617 mas, bmaj=1.399 mas, bpa=-14.8 degrees ! Estimated noise=0.238724 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000564895 Jy ! Component: 100 - total flux cleaned = 0.000800957 Jy ! Component: 150 - total flux cleaned = 0.000939026 Jy ! Component: 200 - total flux cleaned = 0.00101348 Jy ! Total flux subtracted in 200 components = 0.00101348 Jy ! Clean residual min=-0.000568 max=0.000761 Jy/beam ! Clean residual mean=-0.000000 rms=0.000138 Jy/beam ! Combined flux in latest and established models = 0.10343 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 145 components and 0.10343 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.049644Jy sigma=0.455085 ! Fit after self-cal, rms=0.049702Jy sigma=0.454919 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (5, 18.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00061867 Jy ! Component: 100 - total flux cleaned = 0.000803127 Jy ! Component: 150 - total flux cleaned = 0.000883198 Jy ! Component: 200 - total flux cleaned = 0.000953139 Jy ! Total flux subtracted in 200 components = 0.000953139 Jy ! Clean residual min=-0.000551 max=0.000576 Jy/beam ! Clean residual mean=-0.000000 rms=0.000132 Jy/beam ! Combined flux in latest and established models = 0.104383 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 157 components and 0.104383 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.049692Jy sigma=0.454828 ! Fit after self-cal, rms=0.049690Jy sigma=0.454812 ! Inverting map ! Added new window around map position (-27.2, -25.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000512353 Jy ! Component: 100 - total flux cleaned = 0.00068664 Jy ! Component: 150 - total flux cleaned = 0.000676171 Jy ! Component: 200 - total flux cleaned = 0.00067664 Jy ! Total flux subtracted in 200 components = 0.00067664 Jy ! Clean residual min=-0.000553 max=0.000529 Jy/beam ! Clean residual mean=0.000000 rms=0.000129 Jy/beam ! Combined flux in latest and established models = 0.105059 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 169 components and 0.105059 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.049682Jy sigma=0.454745 ! Fit after self-cal, rms=0.049679Jy sigma=0.454738 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.049679Jy sigma=0.454738 ! Fit after self-cal, rms=0.049301Jy sigma=0.454650 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9513 mas, bmaj=1.382 mas, bpa=-14.6 degrees ! Estimated noise=0.235882 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000346335 Jy ! Component: 100 - total flux cleaned = 0.000568222 Jy ! Component: 150 - total flux cleaned = 0.000732629 Jy ! Component: 200 - total flux cleaned = 0.000876382 Jy ! Total flux subtracted in 200 components = 0.000876382 Jy ! Clean residual min=-0.000500 max=0.000488 Jy/beam ! Clean residual mean=-0.000000 rms=0.000118 Jy/beam ! Combined flux in latest and established models = 0.105936 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 171 components and 0.105936 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.049293Jy sigma=0.454571 ! Fit after self-cal, rms=0.049296Jy sigma=0.454562 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000158468 Jy ! Component: 100 - total flux cleaned = 0.000246762 Jy ! Component: 150 - total flux cleaned = 0.000283146 Jy ! Component: 200 - total flux cleaned = 0.000317717 Jy ! Total flux subtracted in 200 components = 0.000317717 Jy ! Clean residual min=-0.000504 max=0.000488 Jy/beam ! Clean residual mean=0.000000 rms=0.000117 Jy/beam ! Combined flux in latest and established models = 0.106254 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 177 components and 0.106254 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.049293Jy sigma=0.454530 ! Fit after self-cal, rms=0.049292Jy sigma=0.454528 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.049292Jy sigma=0.454528 ! Fit after self-cal, rms=0.048937Jy sigma=0.454499 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.206 mas, bmaj=2.521 mas, bpa=-30.8 degrees ! Estimated noise=0.303221 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000416995 Jy ! Component: 100 - total flux cleaned = 0.000651806 Jy ! Component: 150 - total flux cleaned = 0.000777327 Jy ! Component: 200 - total flux cleaned = 0.000824509 Jy ! Total flux subtracted in 200 components = 0.000824509 Jy ! Clean residual min=-0.000553 max=0.000549 Jy/beam ! Clean residual mean=0.000000 rms=0.000140 Jy/beam ! Combined flux in latest and established models = 0.107078 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 196 components and 0.107078 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.048935Jy sigma=0.454480 ! Fit after self-cal, rms=0.048934Jy sigma=0.454474 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.35287e-05 Jy ! Component: 100 - total flux cleaned = 9.72096e-05 Jy ! Component: 150 - total flux cleaned = 0.000128091 Jy ! Component: 200 - total flux cleaned = 0.000156785 Jy ! Total flux subtracted in 200 components = 0.000156785 Jy ! Clean residual min=-0.000556 max=0.000542 Jy/beam ! Clean residual mean=0.000000 rms=0.000139 Jy/beam ! Combined flux in latest and established models = 0.107235 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 197 components and 0.107235 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.048933Jy sigma=0.454465 ! Fit after self-cal, rms=0.048932Jy sigma=0.454463 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9442 mas, bmaj=1.371 mas, bpa=-14.56 degrees ! Estimated noise=0.23389 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9442 x 1.371 at -14.56 degrees (North through East) ! Clean map min=-0.00043476 max=0.046256 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.707 mas, bmaj=1.007 mas, bpa=-14.9 degrees ! Estimated noise=0.597691 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0307998 Jy ! Component: 100 - total flux cleaned = 0.0473148 Jy ! Component: 150 - total flux cleaned = 0.0580439 Jy ! Component: 200 - total flux cleaned = 0.0658272 Jy ! Total flux subtracted in 200 components = 0.0658272 Jy ! Clean residual min=-0.002035 max=0.004532 Jy/beam ! Clean residual mean=0.000008 rms=0.000510 Jy/beam ! Combined flux in latest and established models = 0.0658272 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 40 model components to the UV plane model. ! The established model now contains 40 components and 0.0658272 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9442 mas, bmaj=1.371 mas, bpa=-14.56 degrees ! Estimated noise=0.23389 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0120563 Jy ! Component: 100 - total flux cleaned = 0.0194177 Jy ! Component: 150 - total flux cleaned = 0.0243443 Jy ! Component: 200 - total flux cleaned = 0.0278271 Jy ! Total flux subtracted in 200 components = 0.0278271 Jy ! Clean residual min=-0.000922 max=0.001974 Jy/beam ! Clean residual mean=0.000000 rms=0.000293 Jy/beam ! Combined flux in latest and established models = 0.0936543 Jy ! Adding 62 model components to the UV plane model. ! The established model now contains 84 components and 0.0936542 Jy ! Inverting map ! Added new window around map position (-0.6, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00255024 Jy ! Component: 100 - total flux cleaned = 0.00448003 Jy ! Component: 150 - total flux cleaned = 0.00596861 Jy ! Component: 200 - total flux cleaned = 0.00717209 Jy ! Total flux subtracted in 200 components = 0.00717209 Jy ! Clean residual min=-0.000630 max=0.000917 Jy/beam ! Clean residual mean=0.000000 rms=0.000161 Jy/beam ! Combined flux in latest and established models = 0.100826 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 115 components and 0.100826 Jy ! Inverting map ! Added new window around map position (0, 2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00104666 Jy ! Component: 100 - total flux cleaned = 0.00190042 Jy ! Component: 150 - total flux cleaned = 0.00262186 Jy ! Component: 200 - total flux cleaned = 0.00323531 Jy ! Total flux subtracted in 200 components = 0.00323531 Jy ! Clean residual min=-0.000543 max=0.000522 Jy/beam ! Clean residual mean=0.000000 rms=0.000126 Jy/beam ! Combined flux in latest and established models = 0.104062 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 138 components and 0.104062 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.206 mas, bmaj=2.521 mas, bpa=-30.8 degrees ! Estimated noise=0.303221 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000910255 Jy ! Component: 100 - total flux cleaned = 0.0015017 Jy ! Component: 150 - total flux cleaned = 0.00195941 Jy ! Component: 200 - total flux cleaned = 0.00232088 Jy ! Total flux subtracted in 200 components = 0.00232088 Jy ! Clean residual min=-0.000572 max=0.000531 Jy/beam ! Clean residual mean=0.000000 rms=0.000145 Jy/beam ! Combined flux in latest and established models = 0.106382 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000287192 Jy ! Component: 100 - total flux cleaned = 0.000482944 Jy ! Component: 150 - total flux cleaned = 0.000562164 Jy ! Component: 200 - total flux cleaned = 0.000625156 Jy ! Total flux subtracted in 200 components = 0.000625156 Jy ! Clean residual min=-0.000553 max=0.000535 Jy/beam ! Clean residual mean=0.000000 rms=0.000140 Jy/beam ! Combined flux in latest and established models = 0.107008 Jy ! Adding 84 model components to the UV plane model. ! The established model now contains 202 components and 0.107008 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9442 mas, bmaj=1.371 mas, bpa=-14.56 degrees ! Estimated noise=0.23389 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000135361 Jy ! Component: 100 - total flux cleaned = 0.000135319 Jy ! Component: 150 - total flux cleaned = 0.000114917 Jy ! Component: 200 - total flux cleaned = 0.000133884 Jy ! Total flux subtracted in 200 components = 0.000133884 Jy ! Clean residual min=-0.000481 max=0.000473 Jy/beam ! Clean residual mean=0.000000 rms=0.000110 Jy/beam ! Combined flux in latest and established models = 0.107142 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 225 components and 0.107142 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.048927Jy sigma=0.454427 ! Fit after self-cal, rms=0.048916Jy sigma=0.454384 wmodel J2040+4527_X_a_map.mod ! Writing 225 model components to file: J2040+4527_X_a_map.mod wobs J2040+4527_X_a_uvs.fits ! Writing UV FITS file: J2040+4527_X_a_uvs.fits wwins J2040+4527_X_a_map.win ! wwins: Wrote 9 windows to J2040+4527_X_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 5.74003e-07 Jy ! Component: 100 - total flux cleaned = -4.88537e-05 Jy ! Component: 150 - total flux cleaned = -8.0872e-05 Jy ! Component: 200 - total flux cleaned = -0.000104251 Jy ! Component: 250 - total flux cleaned = -0.000104215 Jy ! Component: 300 - total flux cleaned = -9.67034e-05 Jy ! Component: 350 - total flux cleaned = -0.000118677 Jy ! Component: 400 - total flux cleaned = -0.000118631 Jy ! Component: 450 - total flux cleaned = -0.00013987 Jy ! Component: 500 - total flux cleaned = -0.000139824 Jy ! Component: 550 - total flux cleaned = -0.000146635 Jy ! Component: 600 - total flux cleaned = -0.000139832 Jy ! Component: 650 - total flux cleaned = -0.000119779 Jy ! Component: 700 - total flux cleaned = -0.000133076 Jy ! Component: 750 - total flux cleaned = -0.000126606 Jy ! Component: 800 - total flux cleaned = -0.000120234 Jy ! Component: 850 - total flux cleaned = -0.000133114 Jy ! Component: 900 - total flux cleaned = -0.00012689 Jy ! Component: 950 - total flux cleaned = -0.000145687 Jy ! Component: 1000 - total flux cleaned = -0.000139557 Jy ! Component: 1050 - total flux cleaned = -0.000145658 Jy ! Component: 1100 - total flux cleaned = -0.000121344 Jy ! Component: 1150 - total flux cleaned = -0.000139432 Jy ! Component: 1200 - total flux cleaned = -0.000139483 Jy ! Component: 1250 - total flux cleaned = -0.000151299 Jy ! Component: 1300 - total flux cleaned = -0.000151315 Jy ! Component: 1350 - total flux cleaned = -0.00016296 Jy ! Component: 1400 - total flux cleaned = -0.000186081 Jy ! Component: 1450 - total flux cleaned = -0.000191739 Jy ! Component: 1500 - total flux cleaned = -0.000208835 Jy ! Component: 1550 - total flux cleaned = -0.000197535 Jy ! Component: 1600 - total flux cleaned = -0.00020319 Jy ! Component: 1650 - total flux cleaned = -0.000192002 Jy ! Component: 1700 - total flux cleaned = -0.00018644 Jy ! Component: 1750 - total flux cleaned = -0.000213992 Jy ! Component: 1800 - total flux cleaned = -0.000219506 Jy ! Component: 1850 - total flux cleaned = -0.0002412 Jy ! Component: 1900 - total flux cleaned = -0.000235772 Jy ! Component: 1950 - total flux cleaned = -0.000235814 Jy ! Component: 2000 - total flux cleaned = -0.000230482 Jy ! Component: 2050 - total flux cleaned = -0.000246287 Jy ! Component: 2100 - total flux cleaned = -0.000246334 Jy ! Component: 2150 - total flux cleaned = -0.000251561 Jy ! Component: 2200 - total flux cleaned = -0.000267094 Jy ! Component: 2250 - total flux cleaned = -0.000272272 Jy ! Component: 2300 - total flux cleaned = -0.000267145 Jy ! Component: 2350 - total flux cleaned = -0.000277395 Jy ! Component: 2400 - total flux cleaned = -0.000292685 Jy ! Component: 2450 - total flux cleaned = -0.000297671 Jy ! Component: 2500 - total flux cleaned = -0.000312814 Jy ! Component: 2550 - total flux cleaned = -0.000307791 Jy ! Component: 2600 - total flux cleaned = -0.000302828 Jy ! Component: 2650 - total flux cleaned = -0.000322691 Jy ! Component: 2700 - total flux cleaned = -0.000327642 Jy ! Component: 2750 - total flux cleaned = -0.00033257 Jy ! Component: 2800 - total flux cleaned = -0.000342343 Jy ! Component: 2850 - total flux cleaned = -0.000337475 Jy ! Component: 2900 - total flux cleaned = -0.000366558 Jy ! Component: 2950 - total flux cleaned = -0.000385859 Jy ! Component: 3000 - total flux cleaned = -0.000385847 Jy ! Component: 3050 - total flux cleaned = -0.000409741 Jy ! Component: 3100 - total flux cleaned = -0.000390629 Jy ! Component: 3150 - total flux cleaned = -0.000400112 Jy ! Component: 3200 - total flux cleaned = -0.000390672 Jy ! Component: 3250 - total flux cleaned = -0.000386008 Jy ! Component: 3300 - total flux cleaned = -0.000423486 Jy ! Component: 3350 - total flux cleaned = -0.000432799 Jy ! Component: 3400 - total flux cleaned = -0.000442102 Jy ! Component: 3450 - total flux cleaned = -0.000418952 Jy ! Component: 3500 - total flux cleaned = -0.000409748 Jy ! Component: 3550 - total flux cleaned = -0.000414358 Jy ! Component: 3600 - total flux cleaned = -0.000437236 Jy ! Component: 3650 - total flux cleaned = -0.000437228 Jy ! Component: 3700 - total flux cleaned = -0.000441751 Jy ! Component: 3750 - total flux cleaned = -0.000432692 Jy ! Component: 3800 - total flux cleaned = -0.000437194 Jy ! Component: 3850 - total flux cleaned = -0.000446179 Jy ! Component: 3900 - total flux cleaned = -0.000432768 Jy ! Component: 3950 - total flux cleaned = -0.000446127 Jy ! Component: 4000 - total flux cleaned = -0.000459475 Jy ! Component: 4050 - total flux cleaned = -0.000450633 Jy ! Total flux subtracted in 4096 components = -0.000455038 Jy ! Clean residual min=-0.000251 max=0.000238 Jy/beam ! Clean residual mean=0.000000 rms=0.000076 Jy/beam ! Combined flux in latest and established models = 0.106686 Jy keep ! Adding 325 model components to the UV plane model. ! The established model now contains 550 components and 0.106686 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uvm//J2040+4527_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9442 x 1.371 at -14.56 degrees (North through East) ! Clean map min=-0.00038207 max=0.046072 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uvm//J2040+4527_X_a_map.fits wmodel /image_prod/ug002_uvm//J2040+4527_X_a_map.mod ! Writing 550 model components to file: /image_prod/ug002_uvm//J2040+4527_X_a_map.mod wobs /image_prod/ug002_uvm//J2040+4527_X_a_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uvm//J2040+4527_X_a_uvs.fits wwins /image_prod/ug002_uvm//J2040+4527_X_a_map.win ! wwins: Wrote 10 windows to /image_prod/ug002_uvm//J2040+4527_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0460724 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 7.64238e-05 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.497633 0.497633 0.995267 1.99053 3.98107 7.96213 15.9243 31.8485 63.6971 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0002 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.046 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 602.853 quit ! Quitting program ! Log file /image_prod/ug002_uvm//J2040+4527_X_a_dfm.log closed on Wed Mar 4 17:40:32 2020