! Started logfile: /image_prod/ug002_uvm//J1849+6705_X_b_dfm.log on Wed Mar 4 17:36:58 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uvm//J1849+6705_X_b_uvm.fits ! Reading UV FITS file: /image_prod/ug002_uvm//J1849+6705_X_b_uvm.fits ! AN table 1: 7 integrations on 36 of 36 possible baselines. ! AN table 2: 8 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.89916 visibilities/baseline/integration-bin. ! Found source: J1849+6705 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 5136 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1849+6705_X_b] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 9. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 10. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 11. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 12. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.290603Jy sigma=11.430148 ! Fit after self-cal, rms=0.368494Jy sigma=3.423256 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6845 mas, bmaj=2.142 mas, bpa=61.17 degrees ! Estimated noise=1.81961 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.560084 Jy ! Component: 100 - total flux cleaned = 0.686722 Jy ! Total flux subtracted in 100 components = 0.686722 Jy ! Clean residual min=-0.047050 max=0.103589 Jy/beam ! Clean residual mean=-0.000041 rms=0.015142 Jy/beam ! Combined flux in latest and established models = 0.686722 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.686722 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.282351Jy sigma=2.548939 ! Fit after self-cal, rms=0.282141Jy sigma=2.547224 ! Inverting map ! Added new window around map position (-5.4, -2.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0875439 Jy ! Component: 100 - total flux cleaned = 0.121198 Jy ! Total flux subtracted in 100 components = 0.121198 Jy ! Clean residual min=-0.051385 max=0.085962 Jy/beam ! Clean residual mean=-0.000048 rms=0.013051 Jy/beam ! Combined flux in latest and established models = 0.80792 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 18 components and 0.80792 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.244917Jy sigma=2.221466 ! Fit after self-cal, rms=0.241529Jy sigma=2.194051 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.847 mas, bmaj=2.248 mas, bpa=58.93 degrees ! Estimated noise=1.1445 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0666931 Jy ! Component: 100 - total flux cleaned = 0.0974941 Jy ! Component: 150 - total flux cleaned = 0.109838 Jy ! Component: 200 - total flux cleaned = 0.121547 Jy ! Total flux subtracted in 200 components = 0.121547 Jy ! Clean residual min=-0.049628 max=0.074869 Jy/beam ! Clean residual mean=-0.000061 rms=0.014145 Jy/beam ! Combined flux in latest and established models = 0.929467 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 29 components and 0.929467 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.213723Jy sigma=1.964206 ! Fit after self-cal, rms=0.212908Jy sigma=1.957923 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.847 x 2.248 at 58.93 degrees (North through East) ! Clean map min=-0.050068 max=0.70208 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.91 HN 0.93 LA 1.07 ! MK 1.00 NL 4.50 OV 0.86 PT 0.93 ! SC 1.04 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 0.97 HN 0.95 KP 0.97 ! NL 0.82 OV 0.92 PT 0.94 SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.89 HN 0.92 LA 1.07 ! MK 1.01 NL 4.81 OV 0.88 PT 0.93 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 0.96 HN 0.93 KP 0.99 ! NL 0.83 OV 0.94 PT 0.95 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.87 HN 0.91 LA 1.06 ! MK 0.99 NL 4.87 OV 0.88 PT 0.93 ! SC 1.04 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 0.95 HN 0.98 KP 0.96 ! NL 0.82 OV 0.94 PT 0.94 SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.90 HN 0.93 LA 1.06 ! MK 1.03 NL 4.59 OV 0.86 PT 0.91 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.96 FD 0.97 HN 0.94 KP 0.97 ! NL 0.83 OV 0.94 PT 0.93 SC 1.05 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.86 HN 0.91 LA 1.08 ! MK 1.00 NL 4.86 OV 0.90 PT 0.95 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 0.96 HN 0.96 KP 1.00 ! NL 0.81 OV 0.92 PT 0.96 SC 0.99 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.86 HN 0.91 LA 1.08 ! MK 1.00 NL 4.53 OV 0.88 PT 0.94 ! SC 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 0.98 HN 0.96 KP 0.97 ! NL 0.82 OV 0.92 PT 0.94 SC 1.03 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.87 HN 0.92 LA 1.07 ! MK 0.99 NL 4.21 OV 0.90 PT 0.93 ! SC 1.04 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 0.97 HN 0.97 KP 0.99 ! NL 0.84 OV 0.94 PT 0.93 SC 1.03 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.87 HN 0.93 LA 1.07 ! MK 0.98 NL 4.84 OV 0.88 PT 0.93 ! SC 1.04 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 0.97 HN 0.99 KP 0.96 ! NL 0.83 OV 0.94 PT 0.92 SC 1.03 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.90 HN 0.93 LA 1.07 ! MK 1.00 NL 4.71 OV 0.89 PT 0.92 ! SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 0.98 HN 0.99 KP 0.96 ! NL 0.84 OV 0.92 PT 0.91 SC 1.02 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.86 HN 0.92 LA 1.06 ! MK 0.97 NL 4.76 OV 0.90 PT 0.93 ! SC 1.04 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 0.96 HN 0.96 KP 0.97 ! NL 0.84 OV 0.93 PT 0.93 SC 1.04 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.87 HN 0.93 LA 1.07 ! MK 0.96 NL 4.79 OV 0.91 PT 0.93 ! SC 1.05 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 0.96 HN 0.97 KP 0.94 ! NL 0.83 OV 0.93 PT 0.92 SC 1.02 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.88 HN 0.95 LA 1.08 ! MK 0.99 NL 4.50 OV 0.88 PT 0.92 ! SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 0.95 HN 0.99 KP 0.96 ! NL 0.83 OV 0.94 PT 0.92 SC 1.04 ! ! ! Fit before self-cal, rms=0.212908Jy sigma=1.957923 ! Fit after self-cal, rms=0.272619Jy sigma=1.009854 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8462 mas, bmaj=2.192 mas, bpa=57.81 degrees ! Estimated noise=1.16662 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00707992 Jy ! Component: 100 - total flux cleaned = -0.00785955 Jy ! Component: 150 - total flux cleaned = -0.00918797 Jy ! Component: 200 - total flux cleaned = -0.0086225 Jy ! Total flux subtracted in 200 components = -0.0086225 Jy ! Clean residual min=-0.022652 max=0.020957 Jy/beam ! Clean residual mean=-0.000008 rms=0.004296 Jy/beam ! Combined flux in latest and established models = 0.920844 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 38 components and 0.920844 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.267930Jy sigma=0.904121 ! Fit after self-cal, rms=0.268025Jy sigma=0.896039 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.268025Jy sigma=0.896039 ! Fit after self-cal, rms=0.277697Jy sigma=0.886231 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8449 mas, bmaj=2.187 mas, bpa=57.69 degrees ! Estimated noise=1.1606 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00483825 Jy ! Component: 100 - total flux cleaned = -0.00741843 Jy ! Component: 150 - total flux cleaned = -0.00696976 Jy ! Component: 200 - total flux cleaned = -0.00656515 Jy ! Total flux subtracted in 200 components = -0.00656515 Jy ! Clean residual min=-0.016760 max=0.017576 Jy/beam ! Clean residual mean=-0.000006 rms=0.003508 Jy/beam ! Combined flux in latest and established models = 0.914279 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 42 components and 0.914279 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.275983Jy sigma=0.837006 ! Fit after self-cal, rms=0.275667Jy sigma=0.833025 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2.8, -6.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00932301 Jy ! Component: 100 - total flux cleaned = 0.0102185 Jy ! Component: 150 - total flux cleaned = 0.00983713 Jy ! Component: 200 - total flux cleaned = 0.0101621 Jy ! Total flux subtracted in 200 components = 0.0101621 Jy ! Clean residual min=-0.013885 max=0.013999 Jy/beam ! Clean residual mean=-0.000005 rms=0.002917 Jy/beam ! Combined flux in latest and established models = 0.924442 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 58 components and 0.924441 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.274559Jy sigma=0.796700 ! Fit after self-cal, rms=0.274452Jy sigma=0.795417 ! Inverting map ! Added new window around map position (-0.2, 1.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0103856 Jy ! Component: 100 - total flux cleaned = 0.0143923 Jy ! Component: 150 - total flux cleaned = 0.0166735 Jy ! Component: 200 - total flux cleaned = 0.0177018 Jy ! Total flux subtracted in 200 components = 0.0177018 Jy ! Clean residual min=-0.011442 max=0.012398 Jy/beam ! Clean residual mean=-0.000004 rms=0.002485 Jy/beam ! Combined flux in latest and established models = 0.942143 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 82 components and 0.942143 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.273597Jy sigma=0.771320 ! Fit after self-cal, rms=0.273527Jy sigma=0.770503 ! Inverting map ! Added new window around map position (5.4, 2.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0088525 Jy ! Component: 100 - total flux cleaned = 0.00881619 Jy ! Component: 150 - total flux cleaned = 0.010925 Jy ! Component: 200 - total flux cleaned = 0.0111307 Jy ! Total flux subtracted in 200 components = 0.0111307 Jy ! Clean residual min=-0.009762 max=0.007847 Jy/beam ! Clean residual mean=-0.000007 rms=0.002203 Jy/beam ! Combined flux in latest and established models = 0.953274 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 100 components and 0.953274 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.272675Jy sigma=0.753990 ! Fit after self-cal, rms=0.272559Jy sigma=0.752137 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.272559Jy sigma=0.752137 ! Fit after self-cal, rms=0.281066Jy sigma=0.746390 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8437 mas, bmaj=2.183 mas, bpa=57.64 degrees ! Estimated noise=1.15697 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00482846 Jy ! Component: 100 - total flux cleaned = -0.00524319 Jy ! Component: 150 - total flux cleaned = -0.00543576 Jy ! Component: 200 - total flux cleaned = -0.00525545 Jy ! Total flux subtracted in 200 components = -0.00525545 Jy ! Clean residual min=-0.008136 max=0.006742 Jy/beam ! Clean residual mean=-0.000005 rms=0.001808 Jy/beam ! Combined flux in latest and established models = 0.948018 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 114 components and 0.948018 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.280744Jy sigma=0.736573 ! Fit after self-cal, rms=0.280670Jy sigma=0.735724 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.64873e-05 Jy ! Component: 100 - total flux cleaned = -0.000357598 Jy ! Component: 150 - total flux cleaned = -0.000810242 Jy ! Component: 200 - total flux cleaned = -0.000815316 Jy ! Total flux subtracted in 200 components = -0.000815316 Jy ! Clean residual min=-0.007716 max=0.006216 Jy/beam ! Clean residual mean=-0.000005 rms=0.001678 Jy/beam ! Combined flux in latest and established models = 0.947203 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 125 components and 0.947203 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.280450Jy sigma=0.730823 ! Fit after self-cal, rms=0.280410Jy sigma=0.730310 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.280410Jy sigma=0.730310 ! Fit after self-cal, rms=0.281541Jy sigma=0.729275 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.859 mas, bmaj=2.763 mas, bpa=59.59 degrees ! Estimated noise=1.57708 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00494459 Jy ! Component: 100 - total flux cleaned = -0.00512597 Jy ! Component: 150 - total flux cleaned = -0.00543235 Jy ! Component: 200 - total flux cleaned = -0.00543023 Jy ! Total flux subtracted in 200 components = -0.00543023 Jy ! Clean residual min=-0.010095 max=0.008007 Jy/beam ! Clean residual mean=-0.000008 rms=0.002387 Jy/beam ! Combined flux in latest and established models = 0.941773 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 141 components and 0.941773 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.281400Jy sigma=0.725735 ! Fit after self-cal, rms=0.281360Jy sigma=0.725338 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000286397 Jy ! Component: 100 - total flux cleaned = 0.00029069 Jy ! Component: 150 - total flux cleaned = 0.000531461 Jy ! Component: 200 - total flux cleaned = 0.00064335 Jy ! Total flux subtracted in 200 components = 0.00064335 Jy ! Clean residual min=-0.009379 max=0.007611 Jy/beam ! Clean residual mean=-0.000007 rms=0.002240 Jy/beam ! Combined flux in latest and established models = 0.942416 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 149 components and 0.942416 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.281271Jy sigma=0.724010 ! Fit after self-cal, rms=0.281256Jy sigma=0.723845 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8435 mas, bmaj=2.182 mas, bpa=57.64 degrees ! Estimated noise=1.15383 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8435 x 2.182 at 57.64 degrees (North through East) ! Clean map min=-0.014192 max=0.71025 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.281256Jy sigma=0.723845 ! Fit after self-cal, rms=0.829059Jy sigma=0.504460 ! Inverting map and beam ! Estimated beam: bmin=0.8439 mas, bmaj=2.18 mas, bpa=57.66 degrees ! Estimated noise=1.15454 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00307122 Jy ! Component: 100 - total flux cleaned = -0.00499522 Jy ! Component: 150 - total flux cleaned = -0.00565793 Jy ! Component: 200 - total flux cleaned = -0.00590398 Jy ! Total flux subtracted in 200 components = -0.00590398 Jy ! Clean residual min=-0.006649 max=0.004720 Jy/beam ! Clean residual mean=-0.000004 rms=0.001323 Jy/beam ! Combined flux in latest and established models = 0.936512 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 162 components and 0.936512 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.829036Jy sigma=0.498186 ! Fit after self-cal, rms=0.829055Jy sigma=0.497729 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00105881 Jy ! Component: 100 - total flux cleaned = -0.00128867 Jy ! Component: 150 - total flux cleaned = -0.00150318 Jy ! Component: 200 - total flux cleaned = -0.00181219 Jy ! Total flux subtracted in 200 components = -0.00181219 Jy ! Clean residual min=-0.006163 max=0.004530 Jy/beam ! Clean residual mean=-0.000003 rms=0.001249 Jy/beam ! Combined flux in latest and established models = 0.9347 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 172 components and 0.9347 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.829045Jy sigma=0.494068 ! Fit after self-cal, rms=0.829066Jy sigma=0.493819 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.829066Jy sigma=0.493819 ! Fit after self-cal, rms=0.843276Jy sigma=0.493051 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6776 mas, bmaj=2.071 mas, bpa=60.33 degrees ! Estimated noise=1.83266 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.563804 Jy ! Component: 100 - total flux cleaned = 0.688399 Jy ! Component: 150 - total flux cleaned = 0.73856 Jy ! Component: 200 - total flux cleaned = 0.774028 Jy ! Total flux subtracted in 200 components = 0.774028 Jy ! Clean residual min=-0.017541 max=0.022353 Jy/beam ! Clean residual mean=-0.000009 rms=0.003747 Jy/beam ! Combined flux in latest and established models = 0.774028 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.774028 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8438 mas, bmaj=2.179 mas, bpa=57.66 degrees ! Estimated noise=1.15293 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.039868 Jy ! Component: 100 - total flux cleaned = 0.0653156 Jy ! Component: 150 - total flux cleaned = 0.0837288 Jy ! Component: 200 - total flux cleaned = 0.0984155 Jy ! Total flux subtracted in 200 components = 0.0984155 Jy ! Clean residual min=-0.010497 max=0.013323 Jy/beam ! Clean residual mean=-0.000005 rms=0.002544 Jy/beam ! Combined flux in latest and established models = 0.872444 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 38 components and 0.872444 Jy ! Inverting map ! Added new window around map position (0.6, 9.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0119057 Jy ! Component: 100 - total flux cleaned = 0.0187538 Jy ! Component: 150 - total flux cleaned = 0.0222404 Jy ! Component: 200 - total flux cleaned = 0.0256456 Jy ! Total flux subtracted in 200 components = 0.0256456 Jy ! Clean residual min=-0.008139 max=0.007809 Jy/beam ! Clean residual mean=-0.000002 rms=0.001843 Jy/beam ! Combined flux in latest and established models = 0.89809 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 70 components and 0.898089 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.859 mas, bmaj=2.76 mas, bpa=59.55 degrees ! Estimated noise=1.57564 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00789735 Jy ! Component: 100 - total flux cleaned = 0.0119488 Jy ! Component: 150 - total flux cleaned = 0.0145403 Jy ! Component: 200 - total flux cleaned = 0.0165522 Jy ! Total flux subtracted in 200 components = 0.0165522 Jy ! Clean residual min=-0.009401 max=0.007227 Jy/beam ! Clean residual mean=-0.000001 rms=0.002255 Jy/beam ! Combined flux in latest and established models = 0.914642 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00179209 Jy ! Component: 100 - total flux cleaned = 0.00338584 Jy ! Component: 150 - total flux cleaned = 0.00500566 Jy ! Component: 200 - total flux cleaned = 0.00615904 Jy ! Total flux subtracted in 200 components = 0.00615904 Jy ! Clean residual min=-0.007754 max=0.005761 Jy/beam ! Clean residual mean=-0.000001 rms=0.001899 Jy/beam ! Combined flux in latest and established models = 0.920801 Jy ! Adding 64 model components to the UV plane model. ! The established model now contains 124 components and 0.920801 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8438 mas, bmaj=2.179 mas, bpa=57.66 degrees ! Estimated noise=1.15293 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00249602 Jy ! Component: 100 - total flux cleaned = -0.0012402 Jy ! Component: 150 - total flux cleaned = -0.000497111 Jy ! Component: 200 - total flux cleaned = 0.000515088 Jy ! Total flux subtracted in 200 components = 0.000515088 Jy ! Clean residual min=-0.005508 max=0.004891 Jy/beam ! Clean residual mean=-0.000001 rms=0.001190 Jy/beam ! Combined flux in latest and established models = 0.921316 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 146 components and 0.921316 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.843491Jy sigma=0.492888 ! Fit after self-cal, rms=0.843283Jy sigma=0.489506 wmodel J1849+6705_X_b_map.mod ! Writing 146 model components to file: J1849+6705_X_b_map.mod wobs J1849+6705_X_b_uvs.fits ! Writing UV FITS file: J1849+6705_X_b_uvs.fits wwins J1849+6705_X_b_map.win ! wwins: Wrote 6 windows to J1849+6705_X_b_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00238324 Jy ! Component: 100 - total flux cleaned = -0.00360933 Jy ! Component: 150 - total flux cleaned = -0.00436696 Jy ! Component: 200 - total flux cleaned = -0.00486894 Jy ! Component: 250 - total flux cleaned = -0.00541065 Jy ! Component: 300 - total flux cleaned = -0.00579972 Jy ! Component: 350 - total flux cleaned = -0.00648703 Jy ! Component: 400 - total flux cleaned = -0.00678794 Jy ! Component: 450 - total flux cleaned = -0.00713786 Jy ! Component: 500 - total flux cleaned = -0.00730732 Jy ! Component: 550 - total flux cleaned = -0.00741769 Jy ! Component: 600 - total flux cleaned = -0.00763231 Jy ! Component: 650 - total flux cleaned = -0.00752733 Jy ! Component: 700 - total flux cleaned = -0.00752702 Jy ! Component: 750 - total flux cleaned = -0.00752835 Jy ! Component: 800 - total flux cleaned = -0.00752886 Jy ! Component: 850 - total flux cleaned = -0.00767277 Jy ! Component: 900 - total flux cleaned = -0.00771886 Jy ! Component: 950 - total flux cleaned = -0.00771902 Jy ! Component: 1000 - total flux cleaned = -0.007583 Jy ! Component: 1050 - total flux cleaned = -0.00749519 Jy ! Component: 1100 - total flux cleaned = -0.00749599 Jy ! Component: 1150 - total flux cleaned = -0.00741127 Jy ! Component: 1200 - total flux cleaned = -0.00736945 Jy ! Component: 1250 - total flux cleaned = -0.0072864 Jy ! Component: 1300 - total flux cleaned = -0.00708284 Jy ! Component: 1350 - total flux cleaned = -0.00704367 Jy ! Component: 1400 - total flux cleaned = -0.00688634 Jy ! Component: 1450 - total flux cleaned = -0.00669353 Jy ! Component: 1500 - total flux cleaned = -0.00673242 Jy ! Component: 1550 - total flux cleaned = -0.00654562 Jy ! Component: 1600 - total flux cleaned = -0.00647262 Jy ! Component: 1650 - total flux cleaned = -0.00636314 Jy ! Component: 1700 - total flux cleaned = -0.00625608 Jy ! Component: 1750 - total flux cleaned = -0.00615058 Jy ! Component: 1800 - total flux cleaned = -0.00608059 Jy ! Component: 1850 - total flux cleaned = -0.00594314 Jy ! Component: 1900 - total flux cleaned = -0.00594336 Jy ! Component: 1950 - total flux cleaned = -0.00607764 Jy ! Component: 2000 - total flux cleaned = -0.00597752 Jy ! Component: 2050 - total flux cleaned = -0.0059119 Jy ! Component: 2100 - total flux cleaned = -0.00600928 Jy ! Component: 2150 - total flux cleaned = -0.00588026 Jy ! Component: 2200 - total flux cleaned = -0.00581623 Jy ! Component: 2250 - total flux cleaned = -0.00569106 Jy ! Component: 2300 - total flux cleaned = -0.00559725 Jy ! Component: 2350 - total flux cleaned = -0.00550553 Jy ! Component: 2400 - total flux cleaned = -0.00547521 Jy ! Component: 2450 - total flux cleaned = -0.00529504 Jy ! Component: 2500 - total flux cleaned = -0.00541456 Jy ! Component: 2550 - total flux cleaned = -0.00544401 Jy ! Component: 2600 - total flux cleaned = -0.00529763 Jy ! Component: 2650 - total flux cleaned = -0.00526871 Jy ! Component: 2700 - total flux cleaned = -0.0052968 Jy ! Component: 2750 - total flux cleaned = -0.00506979 Jy ! Component: 2800 - total flux cleaned = -0.00506977 Jy ! Component: 2850 - total flux cleaned = -0.00498644 Jy ! Component: 2900 - total flux cleaned = -0.00501437 Jy ! Component: 2950 - total flux cleaned = -0.00504136 Jy ! Component: 3000 - total flux cleaned = -0.004987 Jy ! Component: 3050 - total flux cleaned = -0.00498729 Jy ! Component: 3100 - total flux cleaned = -0.00501417 Jy ! Component: 3150 - total flux cleaned = -0.00501451 Jy ! Component: 3200 - total flux cleaned = -0.0050408 Jy ! Component: 3250 - total flux cleaned = -0.00511891 Jy ! Component: 3300 - total flux cleaned = -0.00522247 Jy ! Component: 3350 - total flux cleaned = -0.00529965 Jy ! Component: 3400 - total flux cleaned = -0.00527436 Jy ! Component: 3450 - total flux cleaned = -0.00535025 Jy ! Component: 3500 - total flux cleaned = -0.00540042 Jy ! Component: 3550 - total flux cleaned = -0.00547513 Jy ! Component: 3600 - total flux cleaned = -0.0056235 Jy ! Component: 3650 - total flux cleaned = -0.00559864 Jy ! Component: 3700 - total flux cleaned = -0.0055985 Jy ! Component: 3750 - total flux cleaned = -0.00564685 Jy ! Component: 3800 - total flux cleaned = -0.00567081 Jy ! Component: 3850 - total flux cleaned = -0.00569454 Jy ! Component: 3900 - total flux cleaned = -0.00571825 Jy ! Component: 3950 - total flux cleaned = -0.0057652 Jy ! Component: 4000 - total flux cleaned = -0.00576532 Jy ! Component: 4050 - total flux cleaned = -0.00578891 Jy ! Total flux subtracted in 4096 components = -0.00581235 Jy ! Clean residual min=-0.001321 max=0.001373 Jy/beam ! Clean residual mean=-0.000000 rms=0.000418 Jy/beam ! Combined flux in latest and established models = 0.915504 Jy keep ! Adding 311 model components to the UV plane model. ! The established model now contains 456 components and 0.915503 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uvm//J1849+6705_X_b_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8438 x 2.179 at 57.66 degrees (North through East) ! Clean map min=-0.0051088 max=0.72793 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uvm//J1849+6705_X_b_map.fits wmodel /image_prod/ug002_uvm//J1849+6705_X_b_map.mod ! Writing 456 model components to file: /image_prod/ug002_uvm//J1849+6705_X_b_map.mod wobs /image_prod/ug002_uvm//J1849+6705_X_b_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uvm//J1849+6705_X_b_uvs.fits wwins /image_prod/ug002_uvm//J1849+6705_X_b_map.win ! wwins: Wrote 7 windows to /image_prod/ug002_uvm//J1849+6705_X_b_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.727927 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00041377 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.170527 0.170527 0.341054 0.682107 1.36421 2.72843 5.45686 10.9137 21.8274 43.6549 87.3097 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.727 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1759.25 quit ! Quitting program ! Log file /image_prod/ug002_uvm//J1849+6705_X_b_dfm.log closed on Wed Mar 4 17:37:02 2020