! Started logfile: /image_prod/ug002_uvm//J1804-3017_X_a_dfm.log on Wed Mar  4 17:34:52 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /image_prod/ug002_uvm//J1804-3017_X_a_uvm.fits
! Reading UV FITS file: /image_prod/ug002_uvm//J1804-3017_X_a_uvm.fits
! AN table 1: 175 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.937959 visibilities/baseline/integration-bin.
! Found source: J1804-3017
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 41364 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1804-3017_X_a]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.001462Jy  sigma=8.225644
! Fit after  self-cal, rms=0.968898Jy  sigma=7.962253
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.939 mas, bmaj=6.766 mas, bpa=-3.701 degrees
! Estimated noise=1.27209 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0245565 Jy
! Component: 100  -  total flux cleaned = 0.0301889 Jy
! Total flux subtracted in 100 components = 0.0301889 Jy
! Clean residual min=-0.002818 max=0.002517 Jy/beam
! Clean residual mean=0.000003 rms=0.000692 Jy/beam
! Combined flux in latest and established models = 0.0301889 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.0301889 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055915Jy  sigma=0.430463
! Fit after  self-cal, rms=0.054400Jy  sigma=0.417748
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00332873 Jy
! Component: 100  -  total flux cleaned = 0.00343356 Jy
! Total flux subtracted in 100 components = 0.00343356 Jy
! Clean residual min=-0.002153 max=0.002607 Jy/beam
! Clean residual mean=0.000004 rms=0.000666 Jy/beam
! Combined flux in latest and established models = 0.0336224 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 33 components and 0.0336224 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054100Jy  sigma=0.415421
! Fit after  self-cal, rms=0.054062Jy  sigma=0.415188
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.378 mas, bmaj=7.638 mas, bpa=-2.372 degrees
! Estimated noise=0.43052 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00191242 Jy
! Component: 100  -  total flux cleaned = 0.00238766 Jy
! Component: 150  -  total flux cleaned = 0.00234444 Jy
! Component: 200  -  total flux cleaned = 0.00232798 Jy
! Total flux subtracted in 200 components = 0.00232798 Jy
! Clean residual min=-0.001270 max=0.001777 Jy/beam
! Clean residual mean=0.000002 rms=0.000411 Jy/beam
! Combined flux in latest and established models = 0.0359504 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 63 components and 0.0359504 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053988Jy  sigma=0.414751
! Fit after  self-cal, rms=0.053980Jy  sigma=0.414643
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.378 x 7.638 at -2.372 degrees (North through East)
! Clean map  min=-0.0012719  max=0.035122 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.02     KP        1.23     LA        0.98     
!   NL        1.04     OV        1.00     PT        0.98     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     KP        1.19     LA        1.01     
!   NL        1.05     OV        1.05     PT        0.97     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.02     KP        1.09     LA        1.02     
!   NL        1.08     OV        0.99     PT        1.01     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.98     KP        1.19     LA        0.94     
!   NL        1.09     OV        1.06     PT        1.01     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     FD        1.02     KP        1.13     LA        1.01     
!   NL        1.01     OV        1.04     PT        0.95     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.90     FD        1.04     KP        1.18     LA        0.98     
!   NL        0.93     OV        1.03     PT        1.00     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     FD        0.96     KP        1.15     LA        1.06     
!   NL        0.96     OV        0.99     PT        0.94     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     FD        0.99     KP        1.21     LA        1.02     
!   NL        1.00     OV        0.90     PT        0.93     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.91     FD        0.89     KP        1.13     LA        0.99     
!   NL        1.05     OV        0.98     PT        0.95     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        0.93     KP        1.14     LA        1.02     
!   NL        0.94     OV        0.99     PT        0.90     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.89     FD        0.95     KP        1.07     LA        0.98     
!   NL        0.90     OV        0.98     PT        0.95     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.86     FD        0.89     KP        1.14     LA        0.92     
!   NL        0.95     OV        0.95     PT        0.88     
! 
! 
! Fit before self-cal, rms=0.053980Jy  sigma=0.414643
! Fit after  self-cal, rms=0.051961Jy  sigma=0.413431
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.369 mas, bmaj=7.569 mas, bpa=-1.723 degrees
! Estimated noise=0.426843 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000549065 Jy
! Component: 100  -  total flux cleaned = 0.000595298 Jy
! Component: 150  -  total flux cleaned = 0.000630836 Jy
! Component: 200  -  total flux cleaned = 0.000670131 Jy
! Total flux subtracted in 200 components = 0.000670131 Jy
! Clean residual min=-0.001154 max=0.001064 Jy/beam
! Clean residual mean=0.000000 rms=0.000293 Jy/beam
! Combined flux in latest and established models = 0.0366205 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 81 components and 0.0366205 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051952Jy  sigma=0.413360
! Fit after  self-cal, rms=0.051880Jy  sigma=0.412949
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051880Jy  sigma=0.412949
! Fit after  self-cal, rms=0.051852Jy  sigma=0.411618
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.365 mas, bmaj=7.552 mas, bpa=-1.626 degrees
! Estimated noise=0.426326 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000183811 Jy
! Component: 100  -  total flux cleaned = 0.000233695 Jy
! Component: 150  -  total flux cleaned = 0.000274741 Jy
! Component: 200  -  total flux cleaned = 0.000302397 Jy
! Total flux subtracted in 200 components = 0.000302397 Jy
! Clean residual min=-0.000888 max=0.000927 Jy/beam
! Clean residual mean=0.000000 rms=0.000232 Jy/beam
! Combined flux in latest and established models = 0.0369229 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 92 components and 0.0369229 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051849Jy  sigma=0.411592
! Fit after  self-cal, rms=0.051918Jy  sigma=0.411190
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (6.2, 1.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00017413 Jy
! Component: 100  -  total flux cleaned = 5.60789e-05 Jy
! Component: 150  -  total flux cleaned = -5.34345e-05 Jy
! Component: 200  -  total flux cleaned = -0.000168717 Jy
! Total flux subtracted in 200 components = -0.000168717 Jy
! Clean residual min=-0.000797 max=0.000772 Jy/beam
! Clean residual mean=-0.000000 rms=0.000195 Jy/beam
! Combined flux in latest and established models = 0.0367542 Jy
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 133 components and 0.0367542 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051896Jy  sigma=0.410971
! Fit after  self-cal, rms=0.051885Jy  sigma=0.410864
! Inverting map 
! Added new window around map position (11.6, 42.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000564993 Jy
! Component: 100  -  total flux cleaned = 0.000699065 Jy
! Component: 150  -  total flux cleaned = 0.0007369 Jy
! Component: 200  -  total flux cleaned = 0.000735918 Jy
! Total flux subtracted in 200 components = 0.000735918 Jy
! Clean residual min=-0.000704 max=0.000710 Jy/beam
! Clean residual mean=0.000000 rms=0.000176 Jy/beam
! Combined flux in latest and established models = 0.0374901 Jy
! Performing phase self-cal
! Adding 51 model components to the UV plane model.
! The established model now contains 179 components and 0.0374901 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051869Jy  sigma=0.410711
! Fit after  self-cal, rms=0.051856Jy  sigma=0.410645
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051856Jy  sigma=0.410645
! Fit after  self-cal, rms=0.052265Jy  sigma=0.410294
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.361 mas, bmaj=7.547 mas, bpa=-1.604 degrees
! Estimated noise=0.426251 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000368041 Jy
! Component: 100  -  total flux cleaned = 0.000489932 Jy
! Component: 150  -  total flux cleaned = 0.000531316 Jy
! Component: 200  -  total flux cleaned = 0.000567864 Jy
! Total flux subtracted in 200 components = 0.000567864 Jy
! Clean residual min=-0.000632 max=0.000544 Jy/beam
! Clean residual mean=0.000000 rms=0.000151 Jy/beam
! Combined flux in latest and established models = 0.038058 Jy
selfcal
! Performing phase self-cal
! Adding 50 model components to the UV plane model.
! The established model now contains 219 components and 0.038058 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.052255Jy  sigma=0.410210
! Fit after  self-cal, rms=0.052292Jy  sigma=0.410045
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000158989 Jy
! Component: 100  -  total flux cleaned = 0.000248429 Jy
! Component: 150  -  total flux cleaned = 0.000316948 Jy
! Component: 200  -  total flux cleaned = 0.000348316 Jy
! Total flux subtracted in 200 components = 0.000348316 Jy
! Clean residual min=-0.000597 max=0.000542 Jy/beam
! Clean residual mean=0.000000 rms=0.000150 Jy/beam
! Combined flux in latest and established models = 0.0384063 Jy
! Performing phase self-cal
! Adding 48 model components to the UV plane model.
! The established model now contains 242 components and 0.0384063 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.052286Jy  sigma=0.409997
! Fit after  self-cal, rms=0.052282Jy  sigma=0.409987
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.052282Jy  sigma=0.409987
! Fit after  self-cal, rms=0.052342Jy  sigma=0.409947
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.78 mas, bmaj=8.022 mas, bpa=-0.2427 degrees
! Estimated noise=0.432992 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000202159 Jy
! Component: 100  -  total flux cleaned = 0.000273895 Jy
! Component: 150  -  total flux cleaned = 0.000291646 Jy
! Component: 200  -  total flux cleaned = 0.000274365 Jy
! Total flux subtracted in 200 components = 0.000274365 Jy
! Clean residual min=-0.000556 max=0.000547 Jy/beam
! Clean residual mean=0.000001 rms=0.000151 Jy/beam
! Combined flux in latest and established models = 0.0386807 Jy
selfcal
! Performing phase self-cal
! Adding 56 model components to the UV plane model.
! The established model now contains 278 components and 0.0386807 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.052338Jy  sigma=0.409911
! Fit after  self-cal, rms=0.052352Jy  sigma=0.409875
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.52514e-05 Jy
! Component: 100  -  total flux cleaned = 8.42345e-05 Jy
! Component: 150  -  total flux cleaned = 0.000109297 Jy
! Component: 200  -  total flux cleaned = 0.000109397 Jy
! Total flux subtracted in 200 components = 0.000109397 Jy
! Clean residual min=-0.000571 max=0.000560 Jy/beam
! Clean residual mean=0.000001 rms=0.000150 Jy/beam
! Combined flux in latest and established models = 0.0387901 Jy
! Performing phase self-cal
! Adding 46 model components to the UV plane model.
! The established model now contains 291 components and 0.0387901 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.052349Jy  sigma=0.409851
! Fit after  self-cal, rms=0.052348Jy  sigma=0.409834
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.359 mas, bmaj=7.549 mas, bpa=-1.655 degrees
! Estimated noise=0.425301 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.359 x 7.549 at -1.655 degrees (North through East)
! Clean map  min=-0.0015849  max=0.034726 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.919 mas, bmaj=6.695 mas, bpa=-2.937 degrees
! Estimated noise=1.23967 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0257406 Jy
! Component: 100  -  total flux cleaned = 0.0317526 Jy
! Component: 150  -  total flux cleaned = 0.0330149 Jy
! Component: 200  -  total flux cleaned = 0.0335977 Jy
! Total flux subtracted in 200 components = 0.0335977 Jy
! Clean residual min=-0.001992 max=0.002023 Jy/beam
! Clean residual mean=-0.000000 rms=0.000554 Jy/beam
! Combined flux in latest and established models = 0.0335977 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 39 model components to the UV plane model.
! The established model now contains 39 components and 0.0335977 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.359 mas, bmaj=7.549 mas, bpa=-1.655 degrees
! Estimated noise=0.425301 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00202644 Jy
! Component: 100  -  total flux cleaned = 0.00320259 Jy
! Component: 150  -  total flux cleaned = 0.00385415 Jy
! Component: 200  -  total flux cleaned = 0.00417491 Jy
! Total flux subtracted in 200 components = 0.00417491 Jy
! Clean residual min=-0.000932 max=0.000774 Jy/beam
! Clean residual mean=-0.000001 rms=0.000234 Jy/beam
! Combined flux in latest and established models = 0.0377726 Jy
! Adding 40 model components to the UV plane model.
! The established model now contains 79 components and 0.0377726 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.78 mas, bmaj=8.022 mas, bpa=-0.2427 degrees
! Estimated noise=0.432992 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000560958 Jy
! Component: 100  -  total flux cleaned = 0.000858196 Jy
! Component: 150  -  total flux cleaned = 0.00103004 Jy
! Component: 200  -  total flux cleaned = 0.00118034 Jy
! Total flux subtracted in 200 components = 0.00118034 Jy
! Clean residual min=-0.000758 max=0.000668 Jy/beam
! Clean residual mean=-0.000000 rms=0.000200 Jy/beam
! Combined flux in latest and established models = 0.0389529 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000134392 Jy
! Component: 100  -  total flux cleaned = 0.000254251 Jy
! Component: 150  -  total flux cleaned = 0.000284875 Jy
! Component: 200  -  total flux cleaned = 0.000326625 Jy
! Total flux subtracted in 200 components = 0.000326625 Jy
! Clean residual min=-0.000689 max=0.000577 Jy/beam
! Clean residual mean=-0.000000 rms=0.000178 Jy/beam
! Combined flux in latest and established models = 0.0392796 Jy
! Adding 93 model components to the UV plane model.
! The established model now contains 164 components and 0.0392796 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.359 mas, bmaj=7.549 mas, bpa=-1.655 degrees
! Estimated noise=0.425301 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.26314e-05 Jy
! Component: 100  -  total flux cleaned = -5.44249e-05 Jy
! Component: 150  -  total flux cleaned = -3.0264e-05 Jy
! Component: 200  -  total flux cleaned = -7.29162e-05 Jy
! Total flux subtracted in 200 components = -7.29162e-05 Jy
! Clean residual min=-0.000685 max=0.000527 Jy/beam
! Clean residual mean=-0.000000 rms=0.000157 Jy/beam
! Combined flux in latest and established models = 0.0392067 Jy
selfcal
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 196 components and 0.0392067 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.052351Jy  sigma=0.409878
! Fit after  self-cal, rms=0.052352Jy  sigma=0.409836
wmodel J1804-3017_X_a_map.mod
! Writing 196 model components to file: J1804-3017_X_a_map.mod
wobs   J1804-3017_X_a_uvs.fits
! Writing UV FITS file: J1804-3017_X_a_uvs.fits
wwins  J1804-3017_X_a_map.win
! wwins: Wrote 3 windows to J1804-3017_X_a_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000104881 Jy
! Component: 100  -  total flux cleaned = 3.42818e-05 Jy
! Component: 150  -  total flux cleaned = 0.000145617 Jy
! Component: 200  -  total flux cleaned = 0.000249778 Jy
! Component: 250  -  total flux cleaned = 0.000310645 Jy
! Component: 300  -  total flux cleaned = 0.000332233 Jy
! Component: 350  -  total flux cleaned = 0.000325027 Jy
! Component: 400  -  total flux cleaned = 0.000324978 Jy
! Component: 450  -  total flux cleaned = 0.000312095 Jy
! Component: 500  -  total flux cleaned = 0.000299624 Jy
! Component: 550  -  total flux cleaned = 0.000275437 Jy
! Component: 600  -  total flux cleaned = 0.000263759 Jy
! Component: 650  -  total flux cleaned = 0.000252247 Jy
! Component: 700  -  total flux cleaned = 0.000224413 Jy
! Component: 750  -  total flux cleaned = 0.000197384 Jy
! Component: 800  -  total flux cleaned = 0.000197298 Jy
! Component: 850  -  total flux cleaned = 0.000176631 Jy
! Component: 900  -  total flux cleaned = 0.000166586 Jy
! Component: 950  -  total flux cleaned = 0.000156688 Jy
! Component: 1000  -  total flux cleaned = 0.000127566 Jy
! Component: 1050  -  total flux cleaned = 0.000103806 Jy
! Component: 1100  -  total flux cleaned = 0.000103844 Jy
! Component: 1150  -  total flux cleaned = 8.54434e-05 Jy
! Component: 1200  -  total flux cleaned = 7.20076e-05 Jy
! Component: 1250  -  total flux cleaned = 7.20522e-05 Jy
! Component: 1300  -  total flux cleaned = 7.1874e-05 Jy
! Component: 1350  -  total flux cleaned = 4.59343e-05 Jy
! Component: 1400  -  total flux cleaned = 3.32671e-05 Jy
! Component: 1450  -  total flux cleaned = 2.08e-05 Jy
! Component: 1500  -  total flux cleaned = 4.38164e-06 Jy
! Component: 1550  -  total flux cleaned = 1.26271e-05 Jy
! Component: 1600  -  total flux cleaned = 1.66855e-05 Jy
! Component: 1650  -  total flux cleaned = 1.27401e-05 Jy
! Component: 1700  -  total flux cleaned = 1.27696e-05 Jy
! Component: 1750  -  total flux cleaned = 2.0537e-05 Jy
! Component: 1800  -  total flux cleaned = 2.81694e-05 Jy
! Component: 1850  -  total flux cleaned = 3.57086e-05 Jy
! Component: 1900  -  total flux cleaned = 4.31893e-05 Jy
! Component: 1950  -  total flux cleaned = 4.68368e-05 Jy
! Component: 2000  -  total flux cleaned = 5.7741e-05 Jy
! Component: 2050  -  total flux cleaned = 5.04711e-05 Jy
! Component: 2100  -  total flux cleaned = 3.62135e-05 Jy
! Component: 2150  -  total flux cleaned = 2.56791e-05 Jy
! Component: 2200  -  total flux cleaned = 4.32029e-05 Jy
! Component: 2250  -  total flux cleaned = 2.93112e-05 Jy
! Component: 2300  -  total flux cleaned = 3.61971e-05 Jy
! Component: 2350  -  total flux cleaned = 3.27902e-05 Jy
! Component: 2400  -  total flux cleaned = 3.27516e-05 Jy
! Component: 2450  -  total flux cleaned = 1.93956e-05 Jy
! Component: 2500  -  total flux cleaned = 2.60251e-05 Jy
! Component: 2550  -  total flux cleaned = 2.27179e-05 Jy
! Component: 2600  -  total flux cleaned = 2.5982e-05 Jy
! Component: 2650  -  total flux cleaned = 1.95187e-05 Jy
! Component: 2700  -  total flux cleaned = 1.95254e-05 Jy
! Component: 2750  -  total flux cleaned = 2.58275e-05 Jy
! Component: 2800  -  total flux cleaned = 1.32207e-05 Jy
! Component: 2850  -  total flux cleaned = 6.96189e-06 Jy
! Component: 2900  -  total flux cleaned = 7.69255e-07 Jy
! Component: 2950  -  total flux cleaned = 7.69123e-07 Jy
! Component: 3000  -  total flux cleaned = 3.84298e-06 Jy
! Component: 3050  -  total flux cleaned = 3.89089e-06 Jy
! Component: 3100  -  total flux cleaned = 6.91117e-06 Jy
! Component: 3150  -  total flux cleaned = 1.29018e-05 Jy
! Component: 3200  -  total flux cleaned = 4.00922e-06 Jy
! Component: 3250  -  total flux cleaned = 6.96261e-06 Jy
! Component: 3300  -  total flux cleaned = 1.11235e-06 Jy
! Component: 3350  -  total flux cleaned = 2.14865e-05 Jy
! Component: 3400  -  total flux cleaned = 2.14736e-05 Jy
! Component: 3450  -  total flux cleaned = 3.009e-05 Jy
! Component: 3500  -  total flux cleaned = 3.57984e-05 Jy
! Component: 3550  -  total flux cleaned = 4.42998e-05 Jy
! Component: 3600  -  total flux cleaned = 3.30317e-05 Jy
! Component: 3650  -  total flux cleaned = 4.98962e-05 Jy
! Component: 3700  -  total flux cleaned = 5.8235e-05 Jy
! Component: 3750  -  total flux cleaned = 6.10155e-05 Jy
! Component: 3800  -  total flux cleaned = 7.20422e-05 Jy
! Component: 3850  -  total flux cleaned = 7.47788e-05 Jy
! Component: 3900  -  total flux cleaned = 8.568e-05 Jy
! Component: 3950  -  total flux cleaned = 9.11024e-05 Jy
! Component: 4000  -  total flux cleaned = 9.65022e-05 Jy
! Component: 4050  -  total flux cleaned = 0.000101877 Jy
! Total flux subtracted in 4096 components = 0.000120571 Jy
! Clean residual min=-0.000152 max=0.000189 Jy/beam
! Clean residual mean=-0.000000 rms=0.000059 Jy/beam
! Combined flux in latest and established models = 0.0393272 Jy
keep
! Adding 451 model components to the UV plane model.
! The established model now contains 647 components and 0.0393273 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uvm//J1804-3017_X_a_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.359 x 7.549 at -1.655 degrees (North through East)
! Clean map  min=-0.0014923  max=0.034258 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uvm//J1804-3017_X_a_map.fits
wmodel /image_prod/ug002_uvm//J1804-3017_X_a_map.mod
! Writing 647 model components to file: /image_prod/ug002_uvm//J1804-3017_X_a_map.mod
wobs   /image_prod/ug002_uvm//J1804-3017_X_a_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uvm//J1804-3017_X_a_uvs.fits
wwins  /image_prod/ug002_uvm//J1804-3017_X_a_map.win
! wwins: Wrote 4 windows to /image_prod/ug002_uvm//J1804-3017_X_a_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0342581 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 5.82261e-05 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.50989 0.50989 1.01978 2.03956 4.07912 8.15824 16.3165 32.633 65.2659
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0001 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.034 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  588.362 
quit
! Quitting program
! Log file /image_prod/ug002_uvm//J1804-3017_X_a_dfm.log closed on Wed Mar  4 17:34:59 2020