! Started logfile: /image_prod/ug002_uvm//J1742-3341_S_a_dfm.log on Wed Mar  4 17:32:29 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uvm//J1742-3341_S_a_uvm.fits
! Reading UV FITS file: /image_prod/ug002_uvm//J1742-3341_S_a_uvm.fits
! AN table 1: 74 integrations on 3 of 3 possible baselines.
! AN table 2: 120 integrations on 10 of 10 possible baselines.
! Apparent sampling: 0.778481 visibilities/baseline/integration-bin.
! Found source: J1742-3341
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 36 lines of history.
! 
! Reading 3321 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1742-3341_S_a]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 111 telescope corrections were flagged in sub-array 1.
!  A total of 60 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 111 telescope corrections were flagged in sub-array 1.
!  A total of 60 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 111 telescope corrections were flagged in sub-array 1.
!  A total of 60 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.004897Jy  sigma=7.286632
! Fit after  self-cal, rms=0.945779Jy  sigma=6.918552
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=16.11 mas, bmaj=59.93 mas, bpa=2.033 degrees
! Estimated noise=1.99465 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.041587 Jy
! Component: 100  -  total flux cleaned = 0.0556361 Jy
! Total flux subtracted in 100 components = 0.0556361 Jy
! Clean residual min=-0.005190 max=0.006566 Jy/beam
! Clean residual mean=-0.000219 rms=0.002180 Jy/beam
! Combined flux in latest and established models = 0.0556361 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 27 components and 0.0556361 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064142Jy  sigma=0.395747
! Fit after  self-cal, rms=0.062974Jy  sigma=0.386594
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=16.85 mas, bmaj=61.72 mas, bpa=2.498 degrees
! Estimated noise=1.74529 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00835054 Jy
! Component: 100  -  total flux cleaned = 0.0130718 Jy
! Component: 150  -  total flux cleaned = 0.0158063 Jy
! Component: 200  -  total flux cleaned = 0.0169946 Jy
! Total flux subtracted in 200 components = 0.0169946 Jy
! Clean residual min=-0.001940 max=0.001968 Jy/beam
! Clean residual mean=-0.000071 rms=0.000952 Jy/beam
! Combined flux in latest and established models = 0.0726307 Jy
! Performing phase self-cal
! Adding 93 model components to the UV plane model.
! The established model now contains 118 components and 0.0726307 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060931Jy  sigma=0.377244
! Fit after  self-cal, rms=0.060698Jy  sigma=0.376253
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 16.85 x 61.72 at 2.498 degrees (North through East)
! Clean map  min=-0.0032424  max=0.050931 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 111 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.00*    KP        0.00*    OV        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.11     KP        1.01     LA        0.97     OV        1.09     
!   PT        0.95     
! 
! 
! Correcting IF 2.
!  A total of 111 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.00*    KP        0.00*    OV        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.01     KP        1.04     LA        0.95     OV        1.00     
!   PT        0.92     
! 
! 
! Correcting IF 3.
!  A total of 111 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.00*    KP        0.00*    OV        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.99     KP        1.03     LA        0.97     OV        0.93     
!   PT        0.98     
! 
! 
! Fit before self-cal, rms=0.060698Jy  sigma=0.376253
! Fit after  self-cal, rms=0.050773Jy  sigma=0.379415
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=16.76 mas, bmaj=66.1 mas, bpa=1.466 degrees
! Estimated noise=1.74258 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00248392 Jy
! Component: 100  -  total flux cleaned = 0.00288859 Jy
! Component: 150  -  total flux cleaned = 0.00353769 Jy
! Component: 200  -  total flux cleaned = 0.00423436 Jy
! Total flux subtracted in 200 components = 0.00423436 Jy
! Clean residual min=-0.000724 max=0.000720 Jy/beam
! Clean residual mean=0.000009 rms=0.000333 Jy/beam
! Combined flux in latest and established models = 0.0768651 Jy
! Performing phase self-cal
! Adding 103 model components to the UV plane model.
! The established model now contains 221 components and 0.0768651 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.050590Jy  sigma=0.378139
! Fit after  self-cal, rms=0.050550Jy  sigma=0.377757
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.050550Jy  sigma=0.377757
! Fit after  self-cal, rms=0.050360Jy  sigma=0.377734
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=16.76 mas, bmaj=66.18 mas, bpa=1.43 degrees
! Estimated noise=1.73466 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00138705 Jy
! Component: 100  -  total flux cleaned = 0.00196893 Jy
! Component: 150  -  total flux cleaned = 0.00216605 Jy
! Component: 200  -  total flux cleaned = 0.00237066 Jy
! Total flux subtracted in 200 components = 0.00237066 Jy
! Clean residual min=-0.000540 max=0.000540 Jy/beam
! Clean residual mean=0.000012 rms=0.000243 Jy/beam
! Combined flux in latest and established models = 0.0792358 Jy
selfcal
! Performing phase self-cal
! Adding 109 model components to the UV plane model.
! The established model now contains 323 components and 0.0792358 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.050273Jy  sigma=0.377158
! Fit after  self-cal, rms=0.050222Jy  sigma=0.376970
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000885205 Jy
! Component: 100  -  total flux cleaned = 0.0011224 Jy
! Component: 150  -  total flux cleaned = 0.00145424 Jy
! Component: 200  -  total flux cleaned = 0.00171876 Jy
! Total flux subtracted in 200 components = 0.00171876 Jy
! Clean residual min=-0.000467 max=0.000464 Jy/beam
! Clean residual mean=0.000009 rms=0.000212 Jy/beam
! Combined flux in latest and established models = 0.0809545 Jy
! Performing phase self-cal
! Adding 114 model components to the UV plane model.
! The established model now contains 432 components and 0.0809545 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.050163Jy  sigma=0.376601
! Fit after  self-cal, rms=0.050134Jy  sigma=0.376520
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.050134Jy  sigma=0.376520
! Fit after  self-cal, rms=0.049797Jy  sigma=0.375878
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=16.77 mas, bmaj=65.96 mas, bpa=1.392 degrees
! Estimated noise=1.72831 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000395251 Jy
! Component: 100  -  total flux cleaned = 0.000233463 Jy
! Component: 150  -  total flux cleaned = 0.000206044 Jy
! Component: 200  -  total flux cleaned = 0.000225949 Jy
! Total flux subtracted in 200 components = 0.000225949 Jy
! Clean residual min=-0.000358 max=0.000361 Jy/beam
! Clean residual mean=0.000000 rms=0.000173 Jy/beam
! Combined flux in latest and established models = 0.0811805 Jy
selfcal
! Performing phase self-cal
! Adding 121 model components to the UV plane model.
! The established model now contains 548 components and 0.0811805 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.049760Jy  sigma=0.375688
! Fit after  self-cal, rms=0.049764Jy  sigma=0.375283
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000117854 Jy
! Component: 100  -  total flux cleaned = 6.48584e-05 Jy
! Component: 150  -  total flux cleaned = 0.000133186 Jy
! Component: 200  -  total flux cleaned = 0.000311223 Jy
! Total flux subtracted in 200 components = 0.000311223 Jy
! Clean residual min=-0.000364 max=0.000363 Jy/beam
! Clean residual mean=0.000002 rms=0.000178 Jy/beam
! Combined flux in latest and established models = 0.0814917 Jy
! Performing phase self-cal
! Adding 134 model components to the UV plane model.
! The established model now contains 670 components and 0.0814917 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.049736Jy  sigma=0.375126
! Fit after  self-cal, rms=0.049730Jy  sigma=0.375101
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.049730Jy  sigma=0.375101
! Fit after  self-cal, rms=0.049678Jy  sigma=0.375064
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=17.33 mas, bmaj=65.45 mas, bpa=1.433 degrees
! Estimated noise=1.72503 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000206108 Jy
! Component: 100  -  total flux cleaned = -0.000114313 Jy
! Component: 150  -  total flux cleaned = 2.75477e-05 Jy
! Component: 200  -  total flux cleaned = 8.54318e-05 Jy
! Total flux subtracted in 200 components = 8.54318e-05 Jy
! Clean residual min=-0.000314 max=0.000313 Jy/beam
! Clean residual mean=-0.000001 rms=0.000148 Jy/beam
! Combined flux in latest and established models = 0.0815771 Jy
selfcal
! Performing phase self-cal
! Adding 111 model components to the UV plane model.
! The established model now contains 771 components and 0.0815771 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.049655Jy  sigma=0.374949
! Fit after  self-cal, rms=0.049669Jy  sigma=0.374926
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000155728 Jy
! Component: 100  -  total flux cleaned = -0.000116045 Jy
! Component: 150  -  total flux cleaned = -5.82104e-06 Jy
! Component: 200  -  total flux cleaned = 0.00015252 Jy
! Total flux subtracted in 200 components = 0.00015252 Jy
! Clean residual min=-0.000292 max=0.000290 Jy/beam
! Clean residual mean=-0.000001 rms=0.000141 Jy/beam
! Combined flux in latest and established models = 0.0817296 Jy
! Performing phase self-cal
! Adding 127 model components to the UV plane model.
! The established model now contains 872 components and 0.0817296 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.049652Jy  sigma=0.374837
! Fit after  self-cal, rms=0.049649Jy  sigma=0.374828
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=16.76 mas, bmaj=65.86 mas, bpa=1.379 degrees
! Estimated noise=1.7253 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 16.76 x 65.86 at 1.379 degrees (North through East)
! Clean map  min=-0.0014774  max=0.048935 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=15.81 mas, bmaj=65.63 mas, bpa=0.6455 degrees
! Estimated noise=1.96351 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0381726 Jy
! Component: 100  -  total flux cleaned = 0.0507306 Jy
! Component: 150  -  total flux cleaned = 0.0542545 Jy
! Component: 200  -  total flux cleaned = 0.0577688 Jy
! Total flux subtracted in 200 components = 0.0577688 Jy
! Clean residual min=-0.002693 max=0.002709 Jy/beam
! Clean residual mean=-0.000098 rms=0.001284 Jy/beam
! Combined flux in latest and established models = 0.0577688 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 96 model components to the UV plane model.
! The established model now contains 96 components and 0.0577688 Jy
! Inverting map and beam 
! Estimated beam: bmin=16.76 mas, bmaj=65.86 mas, bpa=1.379 degrees
! Estimated noise=1.7253 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00350028 Jy
! Component: 100  -  total flux cleaned = 0.00463348 Jy
! Component: 150  -  total flux cleaned = 0.00522545 Jy
! Component: 200  -  total flux cleaned = 0.00579032 Jy
! Total flux subtracted in 200 components = 0.00579032 Jy
! Clean residual min=-0.001237 max=0.001223 Jy/beam
! Clean residual mean=-0.000018 rms=0.000675 Jy/beam
! Combined flux in latest and established models = 0.0635591 Jy
! Adding 151 model components to the UV plane model.
! The established model now contains 245 components and 0.0635591 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=17.33 mas, bmaj=65.45 mas, bpa=1.433 degrees
! Estimated noise=1.72503 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000339467 Jy
! Component: 100  -  total flux cleaned = 0.000624946 Jy
! Component: 150  -  total flux cleaned = 0.00123009 Jy
! Component: 200  -  total flux cleaned = 0.00176949 Jy
! Total flux subtracted in 200 components = 0.00176949 Jy
! Clean residual min=-0.000711 max=0.000709 Jy/beam
! Clean residual mean=-0.000005 rms=0.000396 Jy/beam
! Combined flux in latest and established models = 0.0653286 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000571397 Jy
! Component: 100  -  total flux cleaned = 0.00108617 Jy
! Component: 150  -  total flux cleaned = 0.00152168 Jy
! Component: 200  -  total flux cleaned = 0.00174172 Jy
! Total flux subtracted in 200 components = 0.00174172 Jy
! Clean residual min=-0.000503 max=0.000513 Jy/beam
! Clean residual mean=0.000000 rms=0.000277 Jy/beam
! Combined flux in latest and established models = 0.0670703 Jy
! Adding 221 model components to the UV plane model.
! The established model now contains 462 components and 0.0670703 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=16.76 mas, bmaj=65.86 mas, bpa=1.379 degrees
! Estimated noise=1.7253 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.29727e-05 Jy
! Component: 100  -  total flux cleaned = 0.000240689 Jy
! Component: 150  -  total flux cleaned = 0.000491846 Jy
! Component: 200  -  total flux cleaned = 0.000712015 Jy
! Total flux subtracted in 200 components = 0.000712015 Jy
! Clean residual min=-0.000401 max=0.000402 Jy/beam
! Clean residual mean=-0.000001 rms=0.000214 Jy/beam
! Combined flux in latest and established models = 0.0677824 Jy
selfcal
! Performing phase self-cal
! Adding 118 model components to the UV plane model.
! The established model now contains 578 components and 0.0677824 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.049697Jy  sigma=0.375241
! Fit after  self-cal, rms=0.049667Jy  sigma=0.375029
wmodel J1742-3341_S_a_map.mod
! Writing 578 model components to file: J1742-3341_S_a_map.mod
wobs   J1742-3341_S_a_uvs.fits
! Writing UV FITS file: J1742-3341_S_a_uvs.fits
wwins  J1742-3341_S_a_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap   /image_prod/ug002_uvm//J1742-3341_S_a_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 16.76 x 65.86 at 1.379 degrees (North through East)
! Clean map  min=-0.0021678  max=0.046962 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uvm//J1742-3341_S_a_map.fits
wmodel /image_prod/ug002_uvm//J1742-3341_S_a_map.mod
! Writing 578 model components to file: /image_prod/ug002_uvm//J1742-3341_S_a_map.mod
wobs   /image_prod/ug002_uvm//J1742-3341_S_a_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uvm//J1742-3341_S_a_uvs.fits
wwins  /image_prod/ug002_uvm//J1742-3341_S_a_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
! 
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0469622 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000236269 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.50931 1.50931 3.01862 6.03725 12.0745 24.149 48.298 96.5959
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.046 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  198.766 
quit
! Quitting program
! Log file /image_prod/ug002_uvm//J1742-3341_S_a_dfm.log closed on Wed Mar  4 17:32:33 2020