! Started logfile: /image_prod/ug002_uvm//J1711-3744_X_a_dfm.log on Wed Mar 4 17:30:32 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uvm//J1711-3744_X_a_uvm.fits ! Reading UV FITS file: /image_prod/ug002_uvm//J1711-3744_X_a_uvm.fits ! AN table 1: 50 integrations on 15 of 15 possible baselines. ! AN table 2: 50 integrations on 21 of 21 possible baselines. ! AN table 3: 110 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.860656 visibilities/baseline/integration-bin. ! Found source: J1711-3744 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 50400 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1711-3744_X_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 1 telescope corrections were flagged in sub-array 2. ! A total of 164 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 1 telescope corrections were flagged in sub-array 2. ! A total of 164 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 1 telescope corrections were flagged in sub-array 2. ! A total of 164 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 1 telescope corrections were flagged in sub-array 2. ! A total of 164 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 5. ! A total of 1 telescope corrections were flagged in sub-array 2. ! A total of 164 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 6. ! A total of 1 telescope corrections were flagged in sub-array 2. ! A total of 164 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 7. ! A total of 1 telescope corrections were flagged in sub-array 2. ! A total of 164 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 8. ! A total of 1 telescope corrections were flagged in sub-array 2. ! A total of 164 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 9. ! A total of 1 telescope corrections were flagged in sub-array 2. ! A total of 164 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 10. ! A total of 1 telescope corrections were flagged in sub-array 2. ! A total of 164 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 11. ! A total of 1 telescope corrections were flagged in sub-array 2. ! A total of 164 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 12. ! A total of 1 telescope corrections were flagged in sub-array 2. ! A total of 164 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=1.042155Jy sigma=7.621097 ! Fit after self-cal, rms=0.801630Jy sigma=5.768574 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6008 mas, bmaj=2.282 mas, bpa=16.05 degrees ! Estimated noise=1.21205 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.112349 Jy ! Component: 100 - total flux cleaned = 0.176566 Jy ! Total flux subtracted in 100 components = 0.176566 Jy ! Clean residual min=-0.013036 max=0.035637 Jy/beam ! Clean residual mean=-0.000014 rms=0.004908 Jy/beam ! Combined flux in latest and established models = 0.176566 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 33 components and 0.176566 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.143403Jy sigma=1.064863 ! Fit after self-cal, rms=0.142943Jy sigma=1.062941 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0456441 Jy ! Component: 100 - total flux cleaned = 0.0781106 Jy ! Total flux subtracted in 100 components = 0.0781106 Jy ! Clean residual min=-0.008863 max=0.018672 Jy/beam ! Clean residual mean=-0.000006 rms=0.003024 Jy/beam ! Combined flux in latest and established models = 0.254677 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 54 components and 0.254677 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.103648Jy sigma=0.738210 ! Fit after self-cal, rms=0.103495Jy sigma=0.737953 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0237732 Jy ! Component: 100 - total flux cleaned = 0.0416101 Jy ! Total flux subtracted in 100 components = 0.0416101 Jy ! Clean residual min=-0.007665 max=0.013165 Jy/beam ! Clean residual mean=-0.000003 rms=0.002198 Jy/beam ! Combined flux in latest and established models = 0.296287 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 77 components and 0.296287 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.088897Jy sigma=0.609277 ! Fit after self-cal, rms=0.088880Jy sigma=0.609197 ! Inverting map ! Added new window around map position (-1, -4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0150687 Jy ! Component: 100 - total flux cleaned = 0.0261839 Jy ! Total flux subtracted in 100 components = 0.0261839 Jy ! Clean residual min=-0.007083 max=0.009904 Jy/beam ! Clean residual mean=-0.000002 rms=0.001786 Jy/beam ! Combined flux in latest and established models = 0.322471 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 92 components and 0.322471 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082572Jy sigma=0.552476 ! Fit after self-cal, rms=0.082431Jy sigma=0.551317 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8414 mas, bmaj=2.951 mas, bpa=15.43 degrees ! Estimated noise=0.470165 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0193839 Jy ! Component: 100 - total flux cleaned = 0.0299021 Jy ! Component: 150 - total flux cleaned = 0.0359102 Jy ! Component: 200 - total flux cleaned = 0.0393795 Jy ! Total flux subtracted in 200 components = 0.0393795 Jy ! Clean residual min=-0.007485 max=0.007387 Jy/beam ! Clean residual mean=-0.000004 rms=0.002133 Jy/beam ! Combined flux in latest and established models = 0.36185 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 105 components and 0.361851 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078438Jy sigma=0.510961 ! Fit after self-cal, rms=0.078345Jy sigma=0.510159 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8414 x 2.951 at 15.43 degrees (North through East) ! Clean map min=-0.0072687 max=0.17527 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.03 HN 1.65 KP 1.03 LA 1.06 ! OV 0.92 SC 1.12 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.06 KP 1.03 LA 1.07 MK 1.39 ! OV 0.93 PT 0.90 SC 1.29 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.10 FD 0.94 KP 0.91 LA 1.00* ! NL 1.21 OV 0.93 PT 1.12 SC 1.15 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 1.02 HN 1.78 KP 1.05 LA 1.04 ! OV 0.92 SC 1.07 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.02 KP 1.04 LA 1.07 MK 1.26 ! OV 0.93 PT 0.92 SC 1.24 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.07 FD 0.96 KP 0.92 LA 1.00* ! NL 1.21 OV 0.93 PT 1.10 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 1.04 HN 1.69 KP 1.03 LA 1.04 ! OV 0.92 SC 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.02 KP 1.03 LA 1.07 MK 1.24 ! OV 0.94 PT 0.92 SC 1.22 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.09 FD 0.94 KP 0.92 LA 1.00* ! NL 1.20 OV 0.93 PT 1.11 SC 1.08 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! FD 1.02 HN 1.57 KP 1.03 LA 1.03 ! OV 0.92 SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.05 KP 1.04 LA 1.04 MK 1.23 ! OV 0.92 PT 0.90 SC 1.29 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.11 FD 0.94 KP 0.91 LA 1.00* ! NL 1.18 OV 0.94 PT 1.10 SC 1.06 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! FD 1.02 HN 1.64 KP 1.03 LA 1.02 ! OV 0.91 SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.03 KP 1.03 LA 1.04 MK 1.20 ! OV 0.91 PT 0.90 SC 1.18 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.10 FD 0.93 KP 0.93 LA 1.00* ! NL 1.22 OV 0.94 PT 1.18 SC 1.00 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! FD 1.04 HN 1.76 KP 1.03 LA 1.03 ! OV 0.90 SC 1.06 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.03 KP 1.05 LA 1.07 MK 1.18 ! OV 0.91 PT 0.89 SC 1.09 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.11 FD 0.94 KP 0.93 LA 1.00* ! NL 1.14 OV 0.93 PT 1.10 SC 0.96 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! FD 1.05 HN 1.60 KP 1.04 LA 1.01 ! OV 0.92 SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.04 KP 1.04 LA 1.06 MK 1.20 ! OV 0.90 PT 0.93 SC 1.10 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.10 FD 0.94 KP 0.92 LA 1.00* ! NL 1.14 OV 0.94 PT 1.12 SC 0.95 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! FD 1.04 HN 1.73 KP 1.01 LA 1.03 ! OV 0.91 SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.06 KP 1.02 LA 1.05 MK 1.12 ! OV 0.91 PT 0.91 SC 1.01 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.10 FD 0.93 KP 0.92 LA 1.00* ! NL 1.15 OV 0.92 PT 1.12 SC 0.95 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00 HN 1.58 KP 1.03 LA 1.02 ! OV 0.94 SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.01 KP 1.02 LA 1.03 MK 1.02 ! OV 0.95 PT 0.90 SC 0.95 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.08 FD 0.93 KP 0.92 LA 1.00* ! NL 1.13 OV 0.94 PT 1.11 SC 0.93 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! FD 1.04 HN 1.63 KP 0.99 LA 1.06 ! OV 0.94 SC 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.05 KP 1.03 LA 1.06 MK 1.02 ! OV 0.94 PT 0.89 SC 1.05 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.10 FD 0.92 KP 0.93 LA 1.00* ! NL 1.13 OV 0.94 PT 1.12 SC 0.88 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! FD 1.04 HN 1.61 KP 1.03 LA 1.04 ! OV 0.91 SC 0.91 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.03 KP 1.03 LA 1.07 MK 1.04 ! OV 0.91 PT 0.93 SC 1.08 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.07 FD 0.94 KP 0.93 LA 1.00* ! NL 1.09 OV 0.91 PT 1.13 SC 0.89 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! FD 1.02 HN 1.67 KP 1.05 LA 1.04 ! OV 0.89 SC 0.78 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.03 KP 1.03 LA 1.05 MK 0.96 ! OV 0.92 PT 0.89 SC 0.95 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.08 FD 0.93 KP 0.92 LA 1.00* ! NL 1.11 OV 0.93 PT 1.09 SC 0.84 ! ! ! Fit before self-cal, rms=0.078345Jy sigma=0.510159 ! Fit after self-cal, rms=0.086525Jy sigma=0.467498 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8493 mas, bmaj=3.063 mas, bpa=16.19 degrees ! Estimated noise=0.483968 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0013463 Jy ! Component: 100 - total flux cleaned = -0.00153474 Jy ! Component: 150 - total flux cleaned = -0.00168733 Jy ! Component: 200 - total flux cleaned = -0.00182161 Jy ! Total flux subtracted in 200 components = -0.00182161 Jy ! Clean residual min=-0.003141 max=0.003597 Jy/beam ! Clean residual mean=-0.000003 rms=0.000712 Jy/beam ! Combined flux in latest and established models = 0.360029 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 114 components and 0.360029 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.086302Jy sigma=0.466125 ! Fit after self-cal, rms=0.086699Jy sigma=0.465649 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.086699Jy sigma=0.465649 ! Fit after self-cal, rms=0.087694Jy sigma=0.462765 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8497 mas, bmaj=3.09 mas, bpa=16.58 degrees ! Estimated noise=0.485462 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.12578e-05 Jy ! Component: 100 - total flux cleaned = -7.105e-05 Jy ! Component: 150 - total flux cleaned = -0.000122206 Jy ! Component: 200 - total flux cleaned = -0.000255652 Jy ! Total flux subtracted in 200 components = -0.000255652 Jy ! Clean residual min=-0.002130 max=0.002301 Jy/beam ! Clean residual mean=-0.000002 rms=0.000466 Jy/beam ! Combined flux in latest and established models = 0.359773 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 116 components and 0.359773 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.087591Jy sigma=0.462083 ! Fit after self-cal, rms=0.087598Jy sigma=0.462003 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-16.8, -11.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00114131 Jy ! Component: 100 - total flux cleaned = 0.000816747 Jy ! Component: 150 - total flux cleaned = 0.000681911 Jy ! Component: 200 - total flux cleaned = 0.000567209 Jy ! Total flux subtracted in 200 components = 0.000567209 Jy ! Clean residual min=-0.002012 max=0.001911 Jy/beam ! Clean residual mean=-0.000003 rms=0.000430 Jy/beam ! Combined flux in latest and established models = 0.36034 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 129 components and 0.360341 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.087510Jy sigma=0.461407 ! Fit after self-cal, rms=0.087505Jy sigma=0.461331 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.087505Jy sigma=0.461331 ! Fit after self-cal, rms=0.087690Jy sigma=0.460548 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8493 mas, bmaj=3.108 mas, bpa=16.99 degrees ! Estimated noise=0.485278 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000274142 Jy ! Component: 100 - total flux cleaned = 0.000278406 Jy ! Component: 150 - total flux cleaned = 0.000212325 Jy ! Component: 200 - total flux cleaned = 0.000182933 Jy ! Total flux subtracted in 200 components = 0.000182933 Jy ! Clean residual min=-0.001683 max=0.001783 Jy/beam ! Clean residual mean=-0.000003 rms=0.000351 Jy/beam ! Combined flux in latest and established models = 0.360523 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 139 components and 0.360523 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.087655Jy sigma=0.460306 ! Fit after self-cal, rms=0.087663Jy sigma=0.460287 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.4, 1.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000429576 Jy ! Component: 100 - total flux cleaned = 0.000260499 Jy ! Component: 150 - total flux cleaned = 0.000400947 Jy ! Component: 200 - total flux cleaned = 0.000401965 Jy ! Total flux subtracted in 200 components = 0.000401965 Jy ! Clean residual min=-0.001496 max=0.001598 Jy/beam ! Clean residual mean=-0.000003 rms=0.000318 Jy/beam ! Combined flux in latest and established models = 0.360925 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 153 components and 0.360925 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.087589Jy sigma=0.459778 ! Fit after self-cal, rms=0.087571Jy sigma=0.459738 ! Inverting map ! Added new window around map position (4, -7.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000532806 Jy ! Component: 100 - total flux cleaned = 0.000496733 Jy ! Component: 150 - total flux cleaned = 0.000227047 Jy ! Component: 200 - total flux cleaned = 5.73072e-05 Jy ! Total flux subtracted in 200 components = 5.73072e-05 Jy ! Clean residual min=-0.001417 max=0.001319 Jy/beam ! Clean residual mean=-0.000003 rms=0.000299 Jy/beam ! Combined flux in latest and established models = 0.360983 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 167 components and 0.360983 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.087509Jy sigma=0.459406 ! Fit after self-cal, rms=0.087500Jy sigma=0.459375 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.087500Jy sigma=0.459375 ! Fit after self-cal, rms=0.087304Jy sigma=0.459318 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.465 mas, bmaj=9.06 mas, bpa=8.59 degrees ! Estimated noise=0.597883 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000671783 Jy ! Component: 100 - total flux cleaned = 0.000773563 Jy ! Component: 150 - total flux cleaned = 0.000814512 Jy ! Component: 200 - total flux cleaned = 0.000874715 Jy ! Total flux subtracted in 200 components = 0.000874715 Jy ! Clean residual min=-0.001219 max=0.000994 Jy/beam ! Clean residual mean=-0.000005 rms=0.000318 Jy/beam ! Combined flux in latest and established models = 0.361857 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 178 components and 0.361857 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.087288Jy sigma=0.459268 ! Fit after self-cal, rms=0.087273Jy sigma=0.459257 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000178287 Jy ! Component: 100 - total flux cleaned = 0.000228817 Jy ! Component: 150 - total flux cleaned = 0.000239615 Jy ! Component: 200 - total flux cleaned = 0.000229396 Jy ! Total flux subtracted in 200 components = 0.000229396 Jy ! Clean residual min=-0.001206 max=0.001003 Jy/beam ! Clean residual mean=-0.000005 rms=0.000316 Jy/beam ! Combined flux in latest and established models = 0.362087 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 186 components and 0.362087 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.087263Jy sigma=0.459236 ! Fit after self-cal, rms=0.087256Jy sigma=0.459229 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8478 mas, bmaj=3.115 mas, bpa=17.12 degrees ! Estimated noise=0.484507 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8478 x 3.115 at 17.12 degrees (North through East) ! Clean map min=-0.0016772 max=0.18382 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6057 mas, bmaj=2.397 mas, bpa=17.7 degrees ! Estimated noise=1.2648 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.117898 Jy ! Component: 100 - total flux cleaned = 0.184979 Jy ! Component: 150 - total flux cleaned = 0.231153 Jy ! Component: 200 - total flux cleaned = 0.263678 Jy ! Total flux subtracted in 200 components = 0.263678 Jy ! Clean residual min=-0.007667 max=0.018165 Jy/beam ! Clean residual mean=-0.000008 rms=0.002634 Jy/beam ! Combined flux in latest and established models = 0.263678 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 38 model components to the UV plane model. ! The established model now contains 38 components and 0.263678 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8478 mas, bmaj=3.115 mas, bpa=17.12 degrees ! Estimated noise=0.484507 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0462189 Jy ! Component: 100 - total flux cleaned = 0.0684671 Jy ! Component: 150 - total flux cleaned = 0.0801659 Jy ! Component: 200 - total flux cleaned = 0.0868439 Jy ! Total flux subtracted in 200 components = 0.0868439 Jy ! Clean residual min=-0.002023 max=0.004827 Jy/beam ! Clean residual mean=-0.000004 rms=0.000650 Jy/beam ! Combined flux in latest and established models = 0.350522 Jy ! Adding 86 model components to the UV plane model. ! The established model now contains 112 components and 0.350522 Jy ! Inverting map ! Added new window around map position (-1.2, -0.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00479265 Jy ! Component: 100 - total flux cleaned = 0.00763772 Jy ! Component: 150 - total flux cleaned = 0.00917466 Jy ! Component: 200 - total flux cleaned = 0.00976773 Jy ! Total flux subtracted in 200 components = 0.00976773 Jy ! Clean residual min=-0.001701 max=0.001794 Jy/beam ! Clean residual mean=-0.000002 rms=0.000333 Jy/beam ! Combined flux in latest and established models = 0.360289 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 143 components and 0.360289 Jy ! Inverting map ! Added new window around map position (-6.8, -14.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.62869e-05 Jy ! Component: 100 - total flux cleaned = -1.70659e-05 Jy ! Component: 150 - total flux cleaned = -6.32965e-05 Jy ! Component: 200 - total flux cleaned = -6.30513e-05 Jy ! Total flux subtracted in 200 components = -6.30513e-05 Jy ! Clean residual min=-0.001194 max=0.001129 Jy/beam ! Clean residual mean=-0.000002 rms=0.000294 Jy/beam ! Combined flux in latest and established models = 0.360226 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 168 components and 0.360226 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.465 mas, bmaj=9.06 mas, bpa=8.59 degrees ! Estimated noise=0.597883 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000435425 Jy ! Component: 100 - total flux cleaned = 0.000650112 Jy ! Component: 150 - total flux cleaned = 0.000731149 Jy ! Component: 200 - total flux cleaned = 0.00073196 Jy ! Total flux subtracted in 200 components = 0.00073196 Jy ! Clean residual min=-0.001031 max=0.001136 Jy/beam ! Clean residual mean=-0.000006 rms=0.000320 Jy/beam ! Combined flux in latest and established models = 0.360958 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.25069e-05 Jy ! Component: 100 - total flux cleaned = 4.28206e-05 Jy ! Component: 150 - total flux cleaned = 6.2433e-05 Jy ! Component: 200 - total flux cleaned = 4.37971e-05 Jy ! Total flux subtracted in 200 components = 4.37971e-05 Jy ! Clean residual min=-0.001004 max=0.001084 Jy/beam ! Clean residual mean=-0.000006 rms=0.000310 Jy/beam ! Combined flux in latest and established models = 0.361002 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 195 components and 0.361002 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8478 mas, bmaj=3.115 mas, bpa=17.12 degrees ! Estimated noise=0.484507 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000470833 Jy ! Component: 100 - total flux cleaned = -0.000473449 Jy ! Component: 150 - total flux cleaned = -0.000538744 Jy ! Component: 200 - total flux cleaned = -0.000537217 Jy ! Total flux subtracted in 200 components = -0.000537217 Jy ! Clean residual min=-0.001120 max=0.001029 Jy/beam ! Clean residual mean=-0.000003 rms=0.000263 Jy/beam ! Combined flux in latest and established models = 0.360465 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 215 components and 0.360465 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.087262Jy sigma=0.459000 ! Fit after self-cal, rms=0.087169Jy sigma=0.458789 wmodel J1711-3744_X_a_map.mod ! Writing 215 model components to file: J1711-3744_X_a_map.mod wobs J1711-3744_X_a_uvs.fits ! Writing UV FITS file: J1711-3744_X_a_uvs.fits wwins J1711-3744_X_a_map.win ! wwins: Wrote 7 windows to J1711-3744_X_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -5.58129e-05 Jy ! Component: 100 - total flux cleaned = -3.82354e-05 Jy ! Component: 150 - total flux cleaned = -5.56441e-05 Jy ! Component: 200 - total flux cleaned = -5.81642e-06 Jy ! Component: 250 - total flux cleaned = -5.40218e-06 Jy ! Component: 300 - total flux cleaned = 4.16986e-05 Jy ! Component: 350 - total flux cleaned = 5.71782e-05 Jy ! Component: 400 - total flux cleaned = 7.20253e-05 Jy ! Component: 450 - total flux cleaned = 5.76725e-05 Jy ! Component: 500 - total flux cleaned = 2.91407e-05 Jy ! Component: 550 - total flux cleaned = 1.27849e-06 Jy ! Component: 600 - total flux cleaned = 1.43311e-06 Jy ! Component: 650 - total flux cleaned = -2.56288e-05 Jy ! Component: 700 - total flux cleaned = -2.54788e-05 Jy ! Component: 750 - total flux cleaned = 6.41994e-07 Jy ! Component: 800 - total flux cleaned = 2.63291e-05 Jy ! Component: 850 - total flux cleaned = 2.61406e-05 Jy ! Component: 900 - total flux cleaned = 5.10781e-05 Jy ! Component: 950 - total flux cleaned = 8.7806e-05 Jy ! Component: 1000 - total flux cleaned = 0.000100061 Jy ! Component: 1050 - total flux cleaned = 0.000123943 Jy ! Component: 1100 - total flux cleaned = 0.000147663 Jy ! Component: 1150 - total flux cleaned = 0.0001477 Jy ! Component: 1200 - total flux cleaned = 0.000159386 Jy ! Component: 1250 - total flux cleaned = 0.000193332 Jy ! Component: 1300 - total flux cleaned = 0.000215673 Jy ! Component: 1350 - total flux cleaned = 0.000248946 Jy ! Component: 1400 - total flux cleaned = 0.000248985 Jy ! Component: 1450 - total flux cleaned = 0.000238053 Jy ! Component: 1500 - total flux cleaned = 0.000248919 Jy ! Component: 1550 - total flux cleaned = 0.000259392 Jy ! Component: 1600 - total flux cleaned = 0.000259398 Jy ! Component: 1650 - total flux cleaned = 0.000249096 Jy ! Component: 1700 - total flux cleaned = 0.000238617 Jy ! Component: 1750 - total flux cleaned = 0.000207663 Jy ! Component: 1800 - total flux cleaned = 0.000187373 Jy ! Component: 1850 - total flux cleaned = 0.000237921 Jy ! Component: 1900 - total flux cleaned = 0.000247905 Jy ! Component: 1950 - total flux cleaned = 0.000228016 Jy ! Component: 2000 - total flux cleaned = 0.000218185 Jy ! Component: 2050 - total flux cleaned = 0.000208394 Jy ! Component: 2100 - total flux cleaned = 0.000218089 Jy ! Component: 2150 - total flux cleaned = 0.000218162 Jy ! Component: 2200 - total flux cleaned = 0.000208651 Jy ! Component: 2250 - total flux cleaned = 0.000208699 Jy ! Component: 2300 - total flux cleaned = 0.000265582 Jy ! Component: 2350 - total flux cleaned = 0.0002373 Jy ! Component: 2400 - total flux cleaned = 0.00026529 Jy ! Component: 2450 - total flux cleaned = 0.000283838 Jy ! Component: 2500 - total flux cleaned = 0.000274542 Jy ! Component: 2550 - total flux cleaned = 0.000274501 Jy ! Component: 2600 - total flux cleaned = 0.000283555 Jy ! Component: 2650 - total flux cleaned = 0.000265376 Jy ! Component: 2700 - total flux cleaned = 0.000265384 Jy ! Component: 2750 - total flux cleaned = 0.000283368 Jy ! Component: 2800 - total flux cleaned = 0.000318807 Jy ! Component: 2850 - total flux cleaned = 0.000327576 Jy ! Component: 2900 - total flux cleaned = 0.000318805 Jy ! Component: 2950 - total flux cleaned = 0.000310091 Jy ! Component: 3000 - total flux cleaned = 0.000327457 Jy ! Component: 3050 - total flux cleaned = 0.000344695 Jy ! Component: 3100 - total flux cleaned = 0.000318985 Jy ! Component: 3150 - total flux cleaned = 0.000335988 Jy ! Component: 3200 - total flux cleaned = 0.000319047 Jy ! Component: 3250 - total flux cleaned = 0.000344369 Jy ! Component: 3300 - total flux cleaned = 0.000352844 Jy ! Component: 3350 - total flux cleaned = 0.000344526 Jy ! Component: 3400 - total flux cleaned = 0.000344471 Jy ! Component: 3450 - total flux cleaned = 0.000361041 Jy ! Component: 3500 - total flux cleaned = 0.000385698 Jy ! Component: 3550 - total flux cleaned = 0.000377616 Jy ! Component: 3600 - total flux cleaned = 0.000337023 Jy ! Component: 3650 - total flux cleaned = 0.000369372 Jy ! Component: 3700 - total flux cleaned = 0.000361302 Jy ! Component: 3750 - total flux cleaned = 0.000393344 Jy ! Component: 3800 - total flux cleaned = 0.000369419 Jy ! Component: 3850 - total flux cleaned = 0.000377412 Jy ! Component: 3900 - total flux cleaned = 0.00037743 Jy ! Component: 3950 - total flux cleaned = 0.000408893 Jy ! Component: 4000 - total flux cleaned = 0.00041671 Jy ! Component: 4050 - total flux cleaned = 0.000432243 Jy ! Total flux subtracted in 4096 components = 0.000455508 Jy ! Clean residual min=-0.000437 max=0.000460 Jy/beam ! Clean residual mean=-0.000001 rms=0.000138 Jy/beam ! Combined flux in latest and established models = 0.36092 Jy keep ! Adding 261 model components to the UV plane model. ! The established model now contains 474 components and 0.36092 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uvm//J1711-3744_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8478 x 3.115 at 17.12 degrees (North through East) ! Clean map min=-0.0018335 max=0.19232 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uvm//J1711-3744_X_a_map.fits wmodel /image_prod/ug002_uvm//J1711-3744_X_a_map.mod ! Writing 474 model components to file: /image_prod/ug002_uvm//J1711-3744_X_a_map.mod wobs /image_prod/ug002_uvm//J1711-3744_X_a_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uvm//J1711-3744_X_a_uvs.fits wwins /image_prod/ug002_uvm//J1711-3744_X_a_map.win ! wwins: Wrote 8 windows to /image_prod/ug002_uvm//J1711-3744_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.192324 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000137904 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.215113 0.215113 0.430226 0.860452 1.7209 3.44181 6.88361 13.7672 27.5345 55.0689 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.192 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1394.62 quit ! Quitting program ! Log file /image_prod/ug002_uvm//J1711-3744_X_a_dfm.log closed on Wed Mar 4 17:30:40 2020