! Started logfile: /image_prod/ug002_uvm//J1711-3744_S_a_dfm.log on Wed Mar  4 17:30:26 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uvm//J1711-3744_S_a_uvm.fits
! Reading UV FITS file: /image_prod/ug002_uvm//J1711-3744_S_a_uvm.fits
! AN table 1: 100 integrations on 15 of 15 possible baselines.
! AN table 2: 110 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.729396 visibilities/baseline/integration-bin.
! Found source: J1711-3744
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 8337 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1711-3744_S_a]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 106 telescope corrections were flagged in sub-array 1.
!  A total of 104 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 106 telescope corrections were flagged in sub-array 1.
!  A total of 104 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 106 telescope corrections were flagged in sub-array 1.
!  A total of 104 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.012549Jy  sigma=5.988551
! Fit after  self-cal, rms=0.874431Jy  sigma=5.052538
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.744 mas, bmaj=37.83 mas, bpa=3.259 degrees
! Estimated noise=3.09334 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.103869 Jy
! Component: 100  -  total flux cleaned = 0.151534 Jy
! Total flux subtracted in 100 components = 0.151534 Jy
! Clean residual min=-0.016652 max=0.024265 Jy/beam
! Clean residual mean=-0.000009 rms=0.005786 Jy/beam
! Combined flux in latest and established models = 0.151534 Jy
! Performing phase self-cal
! Adding 42 model components to the UV plane model.
! The established model now contains 42 components and 0.151534 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.109255Jy  sigma=0.602802
! Fit after  self-cal, rms=0.107941Jy  sigma=0.598174
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=9.92 mas, bmaj=45.48 mas, bpa=5.941 degrees
! Estimated noise=1.37396 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0404321 Jy
! Component: 100  -  total flux cleaned = 0.0638273 Jy
! Component: 150  -  total flux cleaned = 0.078561 Jy
! Component: 200  -  total flux cleaned = 0.0887759 Jy
! Total flux subtracted in 200 components = 0.0887759 Jy
! Clean residual min=-0.008797 max=0.010221 Jy/beam
! Clean residual mean=-0.000107 rms=0.002632 Jy/beam
! Combined flux in latest and established models = 0.24031 Jy
! Performing phase self-cal
! Adding 116 model components to the UV plane model.
! The established model now contains 152 components and 0.24031 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.093807Jy  sigma=0.474678
! Fit after  self-cal, rms=0.093045Jy  sigma=0.471430
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 9.92 x 45.48 at 5.941 degrees (North through East)
! Clean map  min=-0.0076571  max=0.14293 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.82     FD        0.90     KP        1.03     LA        0.94     
!   OV        1.01     PT        1.02     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.50     FD        0.96     KP        0.97     LA        0.95     
!   NL        1.29     OV        1.05     PT        0.92     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     KP        1.02     LA        0.92     
!   OV        1.01     PT        0.90     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        2.38     FD        0.93     KP        0.99     LA        0.91     
!   NL        1.04     OV        1.04     PT        0.95     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.94     KP        0.99     LA        0.99     
!   OV        0.92     PT        1.01     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.79     FD        1.01     KP        0.95     LA        0.89     
!   NL        1.04     OV        1.04     PT        0.93     
! 
! 
! Fit before self-cal, rms=0.093045Jy  sigma=0.471430
! Fit after  self-cal, rms=0.115103Jy  sigma=0.455143
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=10.32 mas, bmaj=47.1 mas, bpa=5.705 degrees
! Estimated noise=1.37086 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00300173 Jy
! Component: 100  -  total flux cleaned = 0.00328425 Jy
! Component: 150  -  total flux cleaned = 0.00369916 Jy
! Component: 200  -  total flux cleaned = 0.00414766 Jy
! Total flux subtracted in 200 components = 0.00414766 Jy
! Clean residual min=-0.003660 max=0.006133 Jy/beam
! Clean residual mean=0.000089 rms=0.001482 Jy/beam
! Combined flux in latest and established models = 0.244458 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 170 components and 0.244458 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.114934Jy  sigma=0.453927
! Fit after  self-cal, rms=0.115123Jy  sigma=0.453723
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.115123Jy  sigma=0.453723
! Fit after  self-cal, rms=0.114573Jy  sigma=0.452345
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=10.28 mas, bmaj=47.05 mas, bpa=5.686 degrees
! Estimated noise=1.36847 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00176893 Jy
! Component: 100  -  total flux cleaned = 0.00206125 Jy
! Component: 150  -  total flux cleaned = 0.00239296 Jy
! Component: 200  -  total flux cleaned = 0.00269347 Jy
! Total flux subtracted in 200 components = 0.00269347 Jy
! Clean residual min=-0.003621 max=0.005517 Jy/beam
! Clean residual mean=0.000086 rms=0.001314 Jy/beam
! Combined flux in latest and established models = 0.247151 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 187 components and 0.247151 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.114481Jy  sigma=0.451649
! Fit after  self-cal, rms=0.114438Jy  sigma=0.451615
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000401398 Jy
! Component: 100  -  total flux cleaned = 0.000618437 Jy
! Component: 150  -  total flux cleaned = 0.000864819 Jy
! Component: 200  -  total flux cleaned = 0.00109254 Jy
! Total flux subtracted in 200 components = 0.00109254 Jy
! Clean residual min=-0.003655 max=0.005005 Jy/beam
! Clean residual mean=0.000093 rms=0.001264 Jy/beam
! Combined flux in latest and established models = 0.248244 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 199 components and 0.248244 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.114385Jy  sigma=0.451290
! Fit after  self-cal, rms=0.114374Jy  sigma=0.451272
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.114374Jy  sigma=0.451272
! Fit after  self-cal, rms=0.113554Jy  sigma=0.450913
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=10.26 mas, bmaj=47.35 mas, bpa=5.743 degrees
! Estimated noise=1.36483 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000296986 Jy
! Component: 100  -  total flux cleaned = 0.000450927 Jy
! Component: 150  -  total flux cleaned = 0.000680347 Jy
! Component: 200  -  total flux cleaned = 0.000849854 Jy
! Total flux subtracted in 200 components = 0.000849854 Jy
! Clean residual min=-0.003411 max=0.004842 Jy/beam
! Clean residual mean=0.000081 rms=0.001168 Jy/beam
! Combined flux in latest and established models = 0.249094 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 213 components and 0.249094 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.113508Jy  sigma=0.450581
! Fit after  self-cal, rms=0.113481Jy  sigma=0.450563
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000205641 Jy
! Component: 100  -  total flux cleaned = 0.000365783 Jy
! Component: 150  -  total flux cleaned = 0.000515562 Jy
! Component: 200  -  total flux cleaned = 0.000621392 Jy
! Total flux subtracted in 200 components = 0.000621392 Jy
! Clean residual min=-0.003407 max=0.004525 Jy/beam
! Clean residual mean=0.000085 rms=0.001139 Jy/beam
! Combined flux in latest and established models = 0.249715 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 223 components and 0.249715 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.113446Jy  sigma=0.450395
! Fit after  self-cal, rms=0.113437Jy  sigma=0.450382
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.113437Jy  sigma=0.450382
! Fit after  self-cal, rms=0.113013Jy  sigma=0.450342
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=11.28 mas, bmaj=51.61 mas, bpa=6.436 degrees
! Estimated noise=1.33938 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000611212 Jy
! Component: 100  -  total flux cleaned = 0.000649061 Jy
! Component: 150  -  total flux cleaned = 0.000718439 Jy
! Component: 200  -  total flux cleaned = 0.000750354 Jy
! Total flux subtracted in 200 components = 0.000750354 Jy
! Clean residual min=-0.002982 max=0.004172 Jy/beam
! Clean residual mean=0.000091 rms=0.001105 Jy/beam
! Combined flux in latest and established models = 0.250465 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 232 components and 0.250465 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.112993Jy  sigma=0.450165
! Fit after  self-cal, rms=0.112977Jy  sigma=0.450155
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000196233 Jy
! Component: 100  -  total flux cleaned = 0.000164212 Jy
! Component: 150  -  total flux cleaned = 0.000163233 Jy
! Component: 200  -  total flux cleaned = 0.000163856 Jy
! Total flux subtracted in 200 components = 0.000163856 Jy
! Clean residual min=-0.002956 max=0.003899 Jy/beam
! Clean residual mean=0.000093 rms=0.001080 Jy/beam
! Combined flux in latest and established models = 0.250629 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 237 components and 0.250629 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.112963Jy  sigma=0.450064
! Fit after  self-cal, rms=0.112955Jy  sigma=0.450057
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=10.25 mas, bmaj=47.55 mas, bpa=5.791 degrees
! Estimated noise=1.36228 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 10.25 x 47.55 at 5.791 degrees (North through East)
! Clean map  min=-0.0032335  max=0.14136 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.998 mas, bmaj=38.9 mas, bpa=3.569 degrees
! Estimated noise=3.1048 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.10459 Jy
! Component: 100  -  total flux cleaned = 0.154383 Jy
! Component: 150  -  total flux cleaned = 0.182685 Jy
! Component: 200  -  total flux cleaned = 0.201048 Jy
! Total flux subtracted in 200 components = 0.201048 Jy
! Clean residual min=-0.009224 max=0.012085 Jy/beam
! Clean residual mean=0.000029 rms=0.002825 Jy/beam
! Combined flux in latest and established models = 0.201048 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 68 model components to the UV plane model.
! The established model now contains 68 components and 0.201048 Jy
! Inverting map and beam 
! Estimated beam: bmin=10.25 mas, bmaj=47.55 mas, bpa=5.791 degrees
! Estimated noise=1.36228 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0165492 Jy
! Component: 100  -  total flux cleaned = 0.0267927 Jy
! Component: 150  -  total flux cleaned = 0.0337999 Jy
! Component: 200  -  total flux cleaned = 0.0388055 Jy
! Total flux subtracted in 200 components = 0.0388055 Jy
! Clean residual min=-0.005367 max=0.007522 Jy/beam
! Clean residual mean=0.000037 rms=0.001524 Jy/beam
! Combined flux in latest and established models = 0.239853 Jy
! Adding 99 model components to the UV plane model.
! The established model now contains 165 components and 0.239853 Jy
! Inverting map 
! Added new window around map position (-13.5, 1.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00346501 Jy
! Component: 100  -  total flux cleaned = 0.006092 Jy
! Component: 150  -  total flux cleaned = 0.00729699 Jy
! Component: 200  -  total flux cleaned = 0.00769798 Jy
! Total flux subtracted in 200 components = 0.00769798 Jy
! Clean residual min=-0.003308 max=0.003497 Jy/beam
! Clean residual mean=0.000067 rms=0.001052 Jy/beam
! Combined flux in latest and established models = 0.247551 Jy
! Adding 65 model components to the UV plane model.
! The established model now contains 229 components and 0.247551 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=11.28 mas, bmaj=51.61 mas, bpa=6.436 degrees
! Estimated noise=1.33938 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000766125 Jy
! Component: 100  -  total flux cleaned = 0.00101509 Jy
! Component: 150  -  total flux cleaned = 0.00117884 Jy
! Component: 200  -  total flux cleaned = 0.00131847 Jy
! Total flux subtracted in 200 components = 0.00131847 Jy
! Clean residual min=-0.002709 max=0.002695 Jy/beam
! Clean residual mean=0.000082 rms=0.000968 Jy/beam
! Combined flux in latest and established models = 0.24887 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000122095 Jy
! Component: 100  -  total flux cleaned = 0.000271511 Jy
! Component: 150  -  total flux cleaned = 0.000341564 Jy
! Component: 200  -  total flux cleaned = 0.000408705 Jy
! Total flux subtracted in 200 components = 0.000408705 Jy
! Clean residual min=-0.002614 max=0.002725 Jy/beam
! Clean residual mean=0.000084 rms=0.000944 Jy/beam
! Combined flux in latest and established models = 0.249278 Jy
! Adding 98 model components to the UV plane model.
! The established model now contains 297 components and 0.249278 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=10.25 mas, bmaj=47.55 mas, bpa=5.791 degrees
! Estimated noise=1.36228 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000121858 Jy
! Component: 100  -  total flux cleaned = -7.37075e-05 Jy
! Component: 150  -  total flux cleaned = -2.72962e-05 Jy
! Component: 200  -  total flux cleaned = 0.000106815 Jy
! Total flux subtracted in 200 components = 0.000106815 Jy
! Clean residual min=-0.002857 max=0.002757 Jy/beam
! Clean residual mean=0.000074 rms=0.000945 Jy/beam
! Combined flux in latest and established models = 0.249385 Jy
selfcal
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 336 components and 0.249385 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.112976Jy  sigma=0.449105
! Fit after  self-cal, rms=0.112877Jy  sigma=0.448834
wmodel J1711-3744_S_a_map.mod
! Writing 336 model components to file: J1711-3744_S_a_map.mod
wobs   J1711-3744_S_a_uvs.fits
! Writing UV FITS file: J1711-3744_S_a_uvs.fits
wwins  J1711-3744_S_a_map.win
! wwins: Wrote 2 windows to J1711-3744_S_a_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 8.21998e-05 Jy
! Component: 100  -  total flux cleaned = 0.000614699 Jy
! Component: 150  -  total flux cleaned = 0.00134154 Jy
! Component: 200  -  total flux cleaned = 0.0018314 Jy
! Component: 250  -  total flux cleaned = 0.00208214 Jy
! Component: 300  -  total flux cleaned = 0.00221935 Jy
! Component: 350  -  total flux cleaned = 0.00228636 Jy
! Component: 400  -  total flux cleaned = 0.00238199 Jy
! Component: 450  -  total flux cleaned = 0.00247322 Jy
! Component: 500  -  total flux cleaned = 0.00253134 Jy
! Component: 550  -  total flux cleaned = 0.0025867 Jy
! Component: 600  -  total flux cleaned = 0.0026684 Jy
! Component: 650  -  total flux cleaned = 0.00277375 Jy
! Component: 700  -  total flux cleaned = 0.0028251 Jy
! Component: 750  -  total flux cleaned = 0.0027505 Jy
! Component: 800  -  total flux cleaned = 0.00270176 Jy
! Component: 850  -  total flux cleaned = 0.00260798 Jy
! Component: 900  -  total flux cleaned = 0.00260821 Jy
! Component: 950  -  total flux cleaned = 0.0025405 Jy
! Component: 1000  -  total flux cleaned = 0.00247453 Jy
! Component: 1050  -  total flux cleaned = 0.00236829 Jy
! Component: 1100  -  total flux cleaned = 0.0023479 Jy
! Component: 1150  -  total flux cleaned = 0.00226645 Jy
! Component: 1200  -  total flux cleaned = 0.00216735 Jy
! Component: 1250  -  total flux cleaned = 0.0020897 Jy
! Component: 1300  -  total flux cleaned = 0.00197517 Jy
! Component: 1350  -  total flux cleaned = 0.00190054 Jy
! Component: 1400  -  total flux cleaned = 0.00190069 Jy
! Component: 1450  -  total flux cleaned = 0.00184592 Jy
! Component: 1500  -  total flux cleaned = 0.00179245 Jy
! Component: 1550  -  total flux cleaned = 0.00180976 Jy
! Component: 1600  -  total flux cleaned = 0.00182651 Jy
! Component: 1650  -  total flux cleaned = 0.00180958 Jy
! Component: 1700  -  total flux cleaned = 0.00179347 Jy
! Component: 1750  -  total flux cleaned = 0.00181016 Jy
! Component: 1800  -  total flux cleaned = 0.00184251 Jy
! Component: 1850  -  total flux cleaned = 0.0018741 Jy
! Component: 1900  -  total flux cleaned = 0.00188966 Jy
! Component: 1950  -  total flux cleaned = 0.00190511 Jy
! Component: 2000  -  total flux cleaned = 0.00195023 Jy
! Component: 2050  -  total flux cleaned = 0.00196505 Jy
! Component: 2100  -  total flux cleaned = 0.00202304 Jy
! Component: 2150  -  total flux cleaned = 0.00209451 Jy
! Component: 2200  -  total flux cleaned = 0.00213674 Jy
! Component: 2250  -  total flux cleaned = 0.00220615 Jy
! Component: 2300  -  total flux cleaned = 0.00224737 Jy
! Component: 2350  -  total flux cleaned = 0.002315 Jy
! Component: 2400  -  total flux cleaned = 0.00238157 Jy
! Component: 2450  -  total flux cleaned = 0.00243422 Jy
! Component: 2500  -  total flux cleaned = 0.00251245 Jy
! Component: 2550  -  total flux cleaned = 0.00253821 Jy
! Component: 2600  -  total flux cleaned = 0.00260151 Jy
! Component: 2650  -  total flux cleaned = 0.00262669 Jy
! Component: 2700  -  total flux cleaned = 0.00270108 Jy
! Component: 2750  -  total flux cleaned = 0.00272548 Jy
! Component: 2800  -  total flux cleaned = 0.00268906 Jy
! Component: 2850  -  total flux cleaned = 0.00268906 Jy
! Component: 2900  -  total flux cleaned = 0.00273659 Jy
! Component: 2950  -  total flux cleaned = 0.00273667 Jy
! Component: 3000  -  total flux cleaned = 0.00278323 Jy
! Component: 3050  -  total flux cleaned = 0.00280617 Jy
! Component: 3100  -  total flux cleaned = 0.00281759 Jy
! Component: 3150  -  total flux cleaned = 0.00281756 Jy
! Component: 3200  -  total flux cleaned = 0.00289626 Jy
! Component: 3250  -  total flux cleaned = 0.00289627 Jy
! Component: 3300  -  total flux cleaned = 0.00292934 Jy
! Component: 3350  -  total flux cleaned = 0.00295129 Jy
! Component: 3400  -  total flux cleaned = 0.00297302 Jy
! Component: 3450  -  total flux cleaned = 0.0029839 Jy
! Component: 3500  -  total flux cleaned = 0.00300524 Jy
! Component: 3550  -  total flux cleaned = 0.0030475 Jy
! Component: 3600  -  total flux cleaned = 0.00304747 Jy
! Component: 3650  -  total flux cleaned = 0.00305791 Jy
! Component: 3700  -  total flux cleaned = 0.00308904 Jy
! Component: 3750  -  total flux cleaned = 0.00310958 Jy
! Component: 3800  -  total flux cleaned = 0.00313006 Jy
! Component: 3850  -  total flux cleaned = 0.00318079 Jy
! Component: 3900  -  total flux cleaned = 0.00319077 Jy
! Component: 3950  -  total flux cleaned = 0.00322074 Jy
! Component: 4000  -  total flux cleaned = 0.00322074 Jy
! Component: 4050  -  total flux cleaned = 0.00326028 Jy
! Total flux subtracted in 4096 components = 0.00328974 Jy
! Clean residual min=-0.000528 max=0.000549 Jy/beam
! Clean residual mean=0.000006 rms=0.000230 Jy/beam
! Combined flux in latest and established models = 0.252675 Jy
keep
! Adding 509 model components to the UV plane model.
! The established model now contains 845 components and 0.252675 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uvm//J1711-3744_S_a_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 10.25 x 47.55 at 5.791 degrees (North through East)
! Clean map  min=-0.0025952  max=0.14031 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uvm//J1711-3744_S_a_map.fits
wmodel /image_prod/ug002_uvm//J1711-3744_S_a_map.mod
! Writing 845 model components to file: /image_prod/ug002_uvm//J1711-3744_S_a_map.mod
wobs   /image_prod/ug002_uvm//J1711-3744_S_a_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uvm//J1711-3744_S_a_uvs.fits
wwins  /image_prod/ug002_uvm//J1711-3744_S_a_map.win
! wwins: Wrote 3 windows to /image_prod/ug002_uvm//J1711-3744_S_a_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.140311 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000220145 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.470694 0.470694 0.941388 1.88278 3.76555 7.53111 15.0622 30.1244 60.2489
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.14 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  637.356 
quit
! Quitting program
! Log file /image_prod/ug002_uvm//J1711-3744_S_a_dfm.log closed on Wed Mar  4 17:30:31 2020