! Started logfile: /image_prod/ug002_uvm//J1636-4102_S_a_dfm.log on Wed Mar  4 17:27:28 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uvm//J1636-4102_S_a_uvm.fits
! Reading UV FITS file: /image_prod/ug002_uvm//J1636-4102_S_a_uvm.fits
! AN table 1: 37 integrations on 3 of 3 possible baselines.
! AN table 2: 37 integrations on 3 of 3 possible baselines.
! AN table 3: 120 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.991098 visibilities/baseline/integration-bin.
! Found source: J1636-4102
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 36 lines of history.
! 
! Reading 6012 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1636-4102_S_a]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  A total of 4 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  A total of 4 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  A total of 4 telescope corrections were flagged in sub-array 3.
! 
! Fit before self-cal, rms=1.037130Jy  sigma=5.837857
! Fit after  self-cal, rms=0.825975Jy  sigma=4.529245
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.529 mas, bmaj=57.99 mas, bpa=-1.834 degrees
! Estimated noise=2.45413 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.123674 Jy
! Component: 100  -  total flux cleaned = 0.152437 Jy
! Total flux subtracted in 100 components = 0.152437 Jy
! Clean residual min=-0.057543 max=0.057339 Jy/beam
! Clean residual mean=0.001860 rms=0.021423 Jy/beam
! Combined flux in latest and established models = 0.152437 Jy
! Performing phase self-cal
! Adding 52 model components to the UV plane model.
! The established model now contains 52 components and 0.152437 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.231302Jy  sigma=1.310887
! Fit after  self-cal, rms=0.228621Jy  sigma=1.293840
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=9.965 mas, bmaj=67.17 mas, bpa=-2.769 degrees
! Estimated noise=1.67882 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0210169 Jy
! Component: 100  -  total flux cleaned = -0.0147148 Jy
! Component: 150  -  total flux cleaned = -0.00533136 Jy
! Component: 200  -  total flux cleaned = 0.00509354 Jy
! Total flux subtracted in 200 components = 0.00509354 Jy
! Clean residual min=-0.031804 max=0.031559 Jy/beam
! Clean residual mean=0.001347 rms=0.014905 Jy/beam
! Combined flux in latest and established models = 0.157531 Jy
! Performing phase self-cal
! Adding 132 model components to the UV plane model.
! The established model now contains 182 components and 0.157531 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.156032Jy  sigma=0.847954
! Fit after  self-cal, rms=0.153773Jy  sigma=0.835709
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 9.965 x 67.17 at -2.769 degrees (North through East)
! Clean map  min=-0.12984  max=0.21111 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 111 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.00*    KP        0.00*    OV        0.00*    
! 
!  A total of 108 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.00*    KP        0.00*    NL        0.00*    
! 
!  Telescope amplitude corrections in sub-array 3:
!   FD        1.04     KP        0.85     LA        0.90     NL        2.16     
!   OV        0.88     PT        0.83     
! 
! 
! Correcting IF 2.
!  A total of 111 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.00*    KP        0.00*    OV        0.00*    
! 
!  A total of 108 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.00*    KP        0.00*    NL        0.00*    
! 
!  Telescope amplitude corrections in sub-array 3:
!   FD        0.94     KP        0.83     LA        0.90     NL        1.78     
!   OV        0.93     PT        0.84     
! 
! 
! Correcting IF 3.
!  A total of 111 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.00*    KP        0.00*    OV        0.00*    
! 
!  A total of 108 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.00*    KP        0.00*    NL        0.00*    
! 
!  Telescope amplitude corrections in sub-array 3:
!   FD        0.93     KP        0.81     LA        0.92     NL        1.56     
!   OV        0.91     PT        0.90     
! 
! 
! Fit before self-cal, rms=0.153773Jy  sigma=0.835709
! Fit after  self-cal, rms=0.149800Jy  sigma=0.735093
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=11.25 mas, bmaj=69.58 mas, bpa=-1.491 degrees
! Estimated noise=1.60125 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0169287 Jy
! Component: 100  -  total flux cleaned = 0.0290251 Jy
! Component: 150  -  total flux cleaned = 0.0348402 Jy
! Component: 200  -  total flux cleaned = 0.0391139 Jy
! Total flux subtracted in 200 components = 0.0391139 Jy
! Clean residual min=-0.012967 max=0.013078 Jy/beam
! Clean residual mean=0.000418 rms=0.006624 Jy/beam
! Combined flux in latest and established models = 0.196645 Jy
! Performing phase self-cal
! Adding 97 model components to the UV plane model.
! The established model now contains 279 components and 0.196645 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.135467Jy  sigma=0.576232
! Fit after  self-cal, rms=0.134824Jy  sigma=0.571557
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.134824Jy  sigma=0.571557
! Fit after  self-cal, rms=0.135509Jy  sigma=0.549101
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=11.34 mas, bmaj=70.39 mas, bpa=-1.578 degrees
! Estimated noise=1.55285 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.43146e-05 Jy
! Component: 100  -  total flux cleaned = 0.000511292 Jy
! Component: 150  -  total flux cleaned = 0.00408204 Jy
! Component: 200  -  total flux cleaned = 0.00680479 Jy
! Total flux subtracted in 200 components = 0.00680479 Jy
! Clean residual min=-0.007218 max=0.007216 Jy/beam
! Clean residual mean=0.000100 rms=0.003730 Jy/beam
! Combined flux in latest and established models = 0.203449 Jy
selfcal
! Performing phase self-cal
! Adding 98 model components to the UV plane model.
! The established model now contains 368 components and 0.203449 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.131134Jy  sigma=0.496012
! Fit after  self-cal, rms=0.130758Jy  sigma=0.494111
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00381035 Jy
! Component: 100  -  total flux cleaned = 0.00540644 Jy
! Component: 150  -  total flux cleaned = 0.00617313 Jy
! Component: 200  -  total flux cleaned = 0.00680515 Jy
! Total flux subtracted in 200 components = 0.00680515 Jy
! Clean residual min=-0.005016 max=0.005019 Jy/beam
! Clean residual mean=0.000007 rms=0.002592 Jy/beam
! Combined flux in latest and established models = 0.210255 Jy
! Performing phase self-cal
! Adding 120 model components to the UV plane model.
! The established model now contains 477 components and 0.210255 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.128552Jy  sigma=0.472802
! Fit after  self-cal, rms=0.128325Jy  sigma=0.472002
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.128325Jy  sigma=0.472002
! Fit after  self-cal, rms=0.122241Jy  sigma=0.468136
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=11.23 mas, bmaj=70.08 mas, bpa=-1.808 degrees
! Estimated noise=1.53397 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000619914 Jy
! Component: 100  -  total flux cleaned = 0.000173382 Jy
! Component: 150  -  total flux cleaned = 0.0011498 Jy
! Component: 200  -  total flux cleaned = 0.000689266 Jy
! Total flux subtracted in 200 components = 0.000689266 Jy
! Clean residual min=-0.003550 max=0.003585 Jy/beam
! Clean residual mean=-0.000035 rms=0.001773 Jy/beam
! Combined flux in latest and established models = 0.210944 Jy
selfcal
! Performing phase self-cal
! Adding 103 model components to the UV plane model.
! The established model now contains 575 components and 0.210944 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.120833Jy  sigma=0.457470
! Fit after  self-cal, rms=0.120696Jy  sigma=0.457127
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000481794 Jy
! Component: 100  -  total flux cleaned = -8.59392e-05 Jy
! Component: 150  -  total flux cleaned = -0.00044436 Jy
! Component: 200  -  total flux cleaned = -0.00043857 Jy
! Total flux subtracted in 200 components = -0.00043857 Jy
! Clean residual min=-0.002780 max=0.002784 Jy/beam
! Clean residual mean=-0.000047 rms=0.001391 Jy/beam
! Combined flux in latest and established models = 0.210505 Jy
! Performing phase self-cal
! Adding 96 model components to the UV plane model.
! The established model now contains 659 components and 0.210505 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.119892Jy  sigma=0.452137
! Fit after  self-cal, rms=0.119691Jy  sigma=0.451962
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.119691Jy  sigma=0.451962
! Fit after  self-cal, rms=0.113637Jy  sigma=0.451252
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=12.32 mas, bmaj=73.7 mas, bpa=-1.424 degrees
! Estimated noise=1.46278 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000276295 Jy
! Component: 100  -  total flux cleaned = -0.000428573 Jy
! Component: 150  -  total flux cleaned = 2.71474e-05 Jy
! Component: 200  -  total flux cleaned = -0.00011533 Jy
! Total flux subtracted in 200 components = -0.00011533 Jy
! Clean residual min=-0.002236 max=0.002224 Jy/beam
! Clean residual mean=-0.000042 rms=0.001088 Jy/beam
! Combined flux in latest and established models = 0.21039 Jy
selfcal
! Performing phase self-cal
! Adding 88 model components to the UV plane model.
! The established model now contains 726 components and 0.21039 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.113050Jy  sigma=0.447767
! Fit after  self-cal, rms=0.112966Jy  sigma=0.447639
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000174552 Jy
! Component: 100  -  total flux cleaned = -0.000561412 Jy
! Component: 150  -  total flux cleaned = -0.00125045 Jy
! Component: 200  -  total flux cleaned = -0.00168846 Jy
! Total flux subtracted in 200 components = -0.00168846 Jy
! Clean residual min=-0.001797 max=0.001803 Jy/beam
! Clean residual mean=-0.000043 rms=0.000888 Jy/beam
! Combined flux in latest and established models = 0.208702 Jy
! Performing phase self-cal
! Adding 97 model components to the UV plane model.
! The established model now contains 805 components and 0.208702 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.112553Jy  sigma=0.445754
! Fit after  self-cal, rms=0.112499Jy  sigma=0.445669
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=11.14 mas, bmaj=69.82 mas, bpa=-1.873 degrees
! Estimated noise=1.52355 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 11.14 x 69.82 at -1.873 degrees (North through East)
! Clean map  min=-0.10216  max=0.19276 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.736 mas, bmaj=61.91 mas, bpa=-1.047 degrees
! Estimated noise=2.20976 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0537618 Jy
! Component: 100  -  total flux cleaned = 0.0838896 Jy
! Component: 150  -  total flux cleaned = 0.0952538 Jy
! Component: 200  -  total flux cleaned = 0.101492 Jy
! Total flux subtracted in 200 components = 0.101492 Jy
! Clean residual min=-0.030981 max=0.031135 Jy/beam
! Clean residual mean=0.001249 rms=0.014103 Jy/beam
! Combined flux in latest and established models = 0.101492 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 116 model components to the UV plane model.
! The established model now contains 116 components and 0.101492 Jy
! Inverting map and beam 
! Estimated beam: bmin=11.14 mas, bmaj=69.82 mas, bpa=-1.873 degrees
! Estimated noise=1.52355 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00802859 Jy
! Component: 100  -  total flux cleaned = 0.0214913 Jy
! Component: 150  -  total flux cleaned = 0.0299855 Jy
! Component: 200  -  total flux cleaned = 0.0385743 Jy
! Total flux subtracted in 200 components = 0.0385743 Jy
! Clean residual min=-0.019065 max=0.018978 Jy/beam
! Clean residual mean=0.000766 rms=0.009423 Jy/beam
! Combined flux in latest and established models = 0.140066 Jy
! Adding 106 model components to the UV plane model.
! The established model now contains 219 components and 0.140066 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=12.32 mas, bmaj=73.7 mas, bpa=-1.424 degrees
! Estimated noise=1.46278 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00672923 Jy
! Component: 100  -  total flux cleaned = 0.00853241 Jy
! Component: 150  -  total flux cleaned = 0.00770084 Jy
! Component: 200  -  total flux cleaned = 0.00925015 Jy
! Total flux subtracted in 200 components = 0.00925015 Jy
! Clean residual min=-0.011547 max=0.011551 Jy/beam
! Clean residual mean=0.000331 rms=0.006003 Jy/beam
! Combined flux in latest and established models = 0.149317 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00203613 Jy
! Component: 100  -  total flux cleaned = 0.0049917 Jy
! Component: 150  -  total flux cleaned = 0.00650475 Jy
! Component: 200  -  total flux cleaned = 0.00507573 Jy
! Total flux subtracted in 200 components = 0.00507573 Jy
! Clean residual min=-0.007424 max=0.007397 Jy/beam
! Clean residual mean=0.000123 rms=0.004019 Jy/beam
! Combined flux in latest and established models = 0.154392 Jy
! Adding 232 model components to the UV plane model.
! The established model now contains 432 components and 0.154392 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=11.14 mas, bmaj=69.82 mas, bpa=-1.873 degrees
! Estimated noise=1.52355 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00128048 Jy
! Component: 100  -  total flux cleaned = -0.00288029 Jy
! Component: 150  -  total flux cleaned = -0.00138508 Jy
! Component: 200  -  total flux cleaned = 0.000660582 Jy
! Total flux subtracted in 200 components = 0.000660582 Jy
! Clean residual min=-0.005423 max=0.005413 Jy/beam
! Clean residual mean=-0.000004 rms=0.002935 Jy/beam
! Combined flux in latest and established models = 0.155053 Jy
selfcal
! Performing phase self-cal
! Adding 101 model components to the UV plane model.
! The established model now contains 530 components and 0.155053 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.115902Jy  sigma=0.473568
! Fit after  self-cal, rms=0.115511Jy  sigma=0.471831
wmodel J1636-4102_S_a_map.mod
! Writing 530 model components to file: J1636-4102_S_a_map.mod
wobs   J1636-4102_S_a_uvs.fits
! Writing UV FITS file: J1636-4102_S_a_uvs.fits
wwins  J1636-4102_S_a_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap   /image_prod/ug002_uvm//J1636-4102_S_a_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 11.14 x 69.82 at -1.873 degrees (North through East)
! Clean map  min=-0.092752  max=0.17579 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uvm//J1636-4102_S_a_map.fits
wmodel /image_prod/ug002_uvm//J1636-4102_S_a_map.mod
! Writing 530 model components to file: /image_prod/ug002_uvm//J1636-4102_S_a_map.mod
wobs   /image_prod/ug002_uvm//J1636-4102_S_a_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uvm//J1636-4102_S_a_uvs.fits
wwins  /image_prod/ug002_uvm//J1636-4102_S_a_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
! 
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.175795 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00286739 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -4.8933 4.8933 9.78661 19.5732 39.1464 78.2929
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0086 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.175 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  61.308 
quit
! Quitting program
! Log file /image_prod/ug002_uvm//J1636-4102_S_a_dfm.log closed on Wed Mar  4 17:27:33 2020