! Started logfile: /image_prod/ug002_uvm//J1616+0459_X_a_dfm.log on Wed Mar 4 17:26:49 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uvm//J1616+0459_X_a_uvm.fits ! Reading UV FITS file: /image_prod/ug002_uvm//J1616+0459_X_a_uvm.fits ! AN table 1: 6 integrations on 28 of 28 possible baselines. ! AN table 2: 6 integrations on 28 of 28 possible baselines. ! AN table 3: 6 integrations on 45 of 45 possible baselines. ! AN table 4: 24 integrations on 36 of 36 possible baselines. ! AN table 5: 6 integrations on 28 of 28 possible baselines. ! AN table 6: 6 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.820598 visibilities/baseline/integration-bin. ! Found source: J1616+0459 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 121 lines of history. ! ! Reading 17784 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1616+0459_X_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 8 telescope corrections were flagged in sub-array 2. ! A total of 5 telescope corrections were flagged in sub-array 3. ! A total of 28 telescope corrections were flagged in sub-array 4. ! A total of 4 telescope corrections were flagged in sub-array 5. ! A total of 5 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 2. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 8 telescope corrections were flagged in sub-array 2. ! A total of 5 telescope corrections were flagged in sub-array 3. ! A total of 28 telescope corrections were flagged in sub-array 4. ! A total of 4 telescope corrections were flagged in sub-array 5. ! A total of 5 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 3. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 8 telescope corrections were flagged in sub-array 2. ! A total of 5 telescope corrections were flagged in sub-array 3. ! A total of 28 telescope corrections were flagged in sub-array 4. ! A total of 4 telescope corrections were flagged in sub-array 5. ! A total of 5 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 4. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 8 telescope corrections were flagged in sub-array 2. ! A total of 5 telescope corrections were flagged in sub-array 3. ! A total of 28 telescope corrections were flagged in sub-array 4. ! A total of 4 telescope corrections were flagged in sub-array 5. ! A total of 5 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 5. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 8 telescope corrections were flagged in sub-array 2. ! A total of 5 telescope corrections were flagged in sub-array 3. ! A total of 28 telescope corrections were flagged in sub-array 4. ! A total of 4 telescope corrections were flagged in sub-array 5. ! A total of 5 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 6. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 8 telescope corrections were flagged in sub-array 2. ! A total of 5 telescope corrections were flagged in sub-array 3. ! A total of 28 telescope corrections were flagged in sub-array 4. ! A total of 4 telescope corrections were flagged in sub-array 5. ! A total of 5 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 7. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 8 telescope corrections were flagged in sub-array 2. ! A total of 5 telescope corrections were flagged in sub-array 3. ! A total of 28 telescope corrections were flagged in sub-array 4. ! A total of 4 telescope corrections were flagged in sub-array 5. ! A total of 5 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 8. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 8 telescope corrections were flagged in sub-array 2. ! A total of 5 telescope corrections were flagged in sub-array 3. ! A total of 28 telescope corrections were flagged in sub-array 4. ! A total of 4 telescope corrections were flagged in sub-array 5. ! A total of 5 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 9. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 8 telescope corrections were flagged in sub-array 2. ! A total of 5 telescope corrections were flagged in sub-array 3. ! A total of 28 telescope corrections were flagged in sub-array 4. ! A total of 4 telescope corrections were flagged in sub-array 5. ! A total of 5 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 10. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 8 telescope corrections were flagged in sub-array 2. ! A total of 5 telescope corrections were flagged in sub-array 3. ! A total of 28 telescope corrections were flagged in sub-array 4. ! A total of 4 telescope corrections were flagged in sub-array 5. ! A total of 5 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 11. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 8 telescope corrections were flagged in sub-array 2. ! A total of 5 telescope corrections were flagged in sub-array 3. ! A total of 28 telescope corrections were flagged in sub-array 4. ! A total of 4 telescope corrections were flagged in sub-array 5. ! A total of 5 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 12. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 8 telescope corrections were flagged in sub-array 2. ! A total of 5 telescope corrections were flagged in sub-array 3. ! A total of 28 telescope corrections were flagged in sub-array 4. ! A total of 4 telescope corrections were flagged in sub-array 5. ! A total of 5 telescope corrections were flagged in sub-array 6. ! ! Fit before self-cal, rms=1.224606Jy sigma=12.110082 ! Fit after self-cal, rms=0.362010Jy sigma=3.526999 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6861 mas, bmaj=1.717 mas, bpa=-1.834 degrees ! Estimated noise=0.855074 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.483989 Jy ! Component: 100 - total flux cleaned = 0.604597 Jy ! Total flux subtracted in 100 components = 0.604597 Jy ! Clean residual min=-0.020114 max=0.050296 Jy/beam ! Clean residual mean=-0.000021 rms=0.004563 Jy/beam ! Combined flux in latest and established models = 0.604597 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.604597 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.189605Jy sigma=1.833998 ! Fit after self-cal, rms=0.189556Jy sigma=1.833227 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0603495 Jy ! Component: 100 - total flux cleaned = 0.0994115 Jy ! Total flux subtracted in 100 components = 0.0994115 Jy ! Clean residual min=-0.015783 max=0.030029 Jy/beam ! Clean residual mean=-0.000014 rms=0.003580 Jy/beam ! Combined flux in latest and established models = 0.704008 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 19 components and 0.704008 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.145814Jy sigma=1.390849 ! Fit after self-cal, rms=0.145430Jy sigma=1.385392 ! Inverting map ! Added new window around map position (1.6, 1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0323996 Jy ! Component: 100 - total flux cleaned = 0.0562542 Jy ! Total flux subtracted in 100 components = 0.0562542 Jy ! Clean residual min=-0.014598 max=0.028212 Jy/beam ! Clean residual mean=-0.000012 rms=0.003199 Jy/beam ! Combined flux in latest and established models = 0.760263 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 29 components and 0.760263 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.128200Jy sigma=1.214331 ! Fit after self-cal, rms=0.127856Jy sigma=1.209943 ! Inverting map ! Added new window around map position (-1.6, -1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0258246 Jy ! Component: 100 - total flux cleaned = 0.0451053 Jy ! Total flux subtracted in 100 components = 0.0451053 Jy ! Clean residual min=-0.013706 max=0.017642 Jy/beam ! Clean residual mean=-0.000010 rms=0.002925 Jy/beam ! Combined flux in latest and established models = 0.805368 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 46 components and 0.805368 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.116420Jy sigma=1.096800 ! Fit after self-cal, rms=0.116240Jy sigma=1.094933 ! Inverting map ! Added new window around map position (-2.6, -1.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0187657 Jy ! Component: 100 - total flux cleaned = 0.0335848 Jy ! Total flux subtracted in 100 components = 0.0335848 Jy ! Clean residual min=-0.012940 max=0.016634 Jy/beam ! Clean residual mean=-0.000009 rms=0.002769 Jy/beam ! Combined flux in latest and established models = 0.838953 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 58 components and 0.838953 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.110065Jy sigma=1.035735 ! Fit after self-cal, rms=0.109907Jy sigma=1.033895 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8884 mas, bmaj=2.03 mas, bpa=-0.609 degrees ! Estimated noise=0.576792 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.8, -1.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0265049 Jy ! Component: 100 - total flux cleaned = 0.0434528 Jy ! Component: 150 - total flux cleaned = 0.052289 Jy ! Component: 200 - total flux cleaned = 0.0576506 Jy ! Total flux subtracted in 200 components = 0.0576506 Jy ! Clean residual min=-0.013532 max=0.016362 Jy/beam ! Clean residual mean=0.000006 rms=0.002996 Jy/beam ! Combined flux in latest and established models = 0.896603 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 91 components and 0.896603 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.102119Jy sigma=0.951864 ! Fit after self-cal, rms=0.101997Jy sigma=0.950388 ! Inverting map ! Added new window around map position (4.6, -14.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0146246 Jy ! Component: 100 - total flux cleaned = 0.0188535 Jy ! Component: 150 - total flux cleaned = 0.0215645 Jy ! Component: 200 - total flux cleaned = 0.0232855 Jy ! Total flux subtracted in 200 components = 0.0232855 Jy ! Clean residual min=-0.012997 max=0.015191 Jy/beam ! Clean residual mean=0.000006 rms=0.002820 Jy/beam ! Combined flux in latest and established models = 0.919889 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 118 components and 0.919889 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.099714Jy sigma=0.922109 ! Fit after self-cal, rms=0.099526Jy sigma=0.920098 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8884 x 2.03 at -0.609 degrees (North through East) ! Clean map min=-0.011997 max=0.63978 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.98 HN 0.92 KP 1.01 ! LA 1.00 MK 0.98 NL 1.45 OV 0.90 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.90 FD 0.98 HN 1.08 KP 1.00 ! LA 0.98 NL 0.99 OV 0.96 PT 0.86 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 1.02 HN 0.95 KP 1.05 ! LA 1.04 MK 0.97 NL 1.08 OV 0.92 ! PT 0.96 SC 0.94 ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.99 FD 1.06 HN 1.00 KP 1.04 ! LA 1.03 MK 0.98 OV 0.93 PT 0.93 ! SC 1.02 ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.99 FD 1.05 HN 0.90 KP 1.06 ! LA 1.05 OV 0.91 PT 0.92 SC 1.00 ! ! A total of 3 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 0.92 FD 1.01 HN 1.36 KP 1.01 ! MK 1.02 NL 1.04 OV 0.91 SC 1.01 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.98 HN 0.86 KP 1.01 ! LA 0.99 MK 1.01 NL 1.42 OV 0.88 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.91 FD 0.99 HN 1.09 KP 0.98 ! LA 0.96 NL 0.97 OV 0.96 PT 0.85 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.01 FD 1.05 HN 0.97 KP 1.04 ! LA 1.01 MK 0.99 NL 1.07 OV 0.94 ! PT 0.95 SC 0.96 ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.98 FD 1.06 HN 1.03 KP 1.04 ! LA 1.03 MK 0.95 OV 0.93 PT 0.92 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.00 FD 1.02 HN 0.90 KP 1.06 ! LA 1.03 OV 0.92 PT 0.95 SC 0.96 ! ! A total of 3 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 0.89 FD 1.02 HN 1.33 KP 1.00 ! MK 1.05 NL 1.08 OV 0.92 SC 0.99 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.98 HN 0.90 KP 1.03 ! LA 1.00 MK 0.98 NL 1.44 OV 0.88 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.91 FD 0.97 HN 1.10 KP 1.00 ! LA 0.97 NL 0.99 OV 0.96 PT 0.85 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 1.02 HN 0.97 KP 1.05 ! LA 1.01 MK 0.98 NL 1.06 OV 0.94 ! PT 0.96 SC 0.96 ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.00 FD 1.04 HN 0.99 KP 1.04 ! LA 1.03 MK 0.97 OV 0.94 PT 0.94 ! SC 1.06 ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.01 FD 1.00 HN 0.90 KP 1.08 ! LA 1.03 OV 0.91 PT 0.94 SC 0.99 ! ! A total of 3 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 0.95 FD 1.03 HN 1.22 KP 1.01 ! MK 1.04 NL 1.05 OV 0.91 SC 0.99 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.99 HN 0.91 KP 1.01 ! LA 0.99 MK 1.02 NL 1.40 OV 0.87 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.91 FD 0.99 HN 1.05 KP 1.00 ! LA 1.00 NL 0.96 OV 0.96 PT 0.85 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 FD 1.03 HN 0.97 KP 1.03 ! LA 1.04 MK 0.97 NL 1.07 OV 0.93 ! PT 0.96 SC 0.93 ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.98 FD 1.06 HN 0.99 KP 1.04 ! LA 1.03 MK 1.01 OV 0.93 PT 0.94 ! SC 1.07 ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.01 FD 1.01 HN 0.91 KP 1.07 ! LA 1.02 OV 0.91 PT 0.93 SC 0.99 ! ! A total of 3 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 0.91 FD 1.03 HN 1.21 KP 0.99 ! MK 1.02 NL 1.01 OV 0.92 SC 1.02 ! ! ! Correcting IF 5. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.00 HN 0.91 KP 1.04 ! LA 1.01 MK 1.03 NL 1.47 OV 0.88 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.93 FD 0.99 HN 1.09 KP 0.99 ! LA 0.96 NL 0.99 OV 0.98 PT 0.85 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 FD 1.04 HN 0.97 KP 1.03 ! LA 1.02 MK 0.98 NL 1.08 OV 0.94 ! PT 0.96 SC 0.95 ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.99 FD 1.06 HN 1.01 KP 1.04 ! LA 1.04 MK 1.01 OV 0.95 PT 0.94 ! SC 1.06 ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.04 FD 1.02 HN 0.91 KP 1.07 ! LA 1.01 OV 0.93 PT 0.90 SC 1.01 ! ! A total of 3 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 0.92 FD 1.02 HN 1.30 KP 1.01 ! MK 1.02 NL 1.07 OV 0.93 SC 1.02 ! ! ! Correcting IF 6. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00 HN 0.93 KP 1.02 ! LA 1.00 MK 1.02 NL 1.51 OV 0.88 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.92 FD 0.99 HN 1.09 KP 1.00 ! LA 0.98 NL 1.02 OV 0.98 PT 0.85 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 FD 1.01 HN 0.97 KP 1.04 ! LA 1.03 MK 0.99 NL 1.09 OV 0.88 ! PT 0.97 SC 0.97 ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.98 FD 1.04 HN 1.03 KP 1.04 ! LA 1.02 MK 1.00 OV 0.93 PT 0.94 ! SC 1.06 ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.02 FD 1.04 HN 0.92 KP 1.06 ! LA 1.01 OV 0.92 PT 0.92 SC 0.99 ! ! A total of 3 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 0.93 FD 1.04 HN 1.35 KP 1.02 ! MK 1.04 NL 1.05 OV 0.92 SC 1.02 ! ! ! Correcting IF 7. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.02 HN 0.92 KP 1.03 ! LA 1.01 MK 1.04 NL 1.36 OV 0.88 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.91 FD 0.98 HN 1.08 KP 1.00 ! LA 0.99 NL 1.00 OV 0.98 PT 0.86 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 FD 1.06 HN 0.98 KP 1.03 ! LA 1.02 MK 0.98 NL 1.07 OV 0.94 ! PT 0.95 SC 0.97 ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.99 FD 1.05 HN 1.02 KP 1.03 ! LA 1.05 MK 1.02 OV 0.93 PT 0.93 ! SC 1.08 ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.01 FD 1.04 HN 0.93 KP 1.05 ! LA 1.03 OV 0.93 PT 0.93 SC 1.01 ! ! A total of 3 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 0.94 FD 1.03 HN 1.34 KP 1.01 ! MK 1.04 NL 1.06 OV 0.94 SC 1.00 ! ! ! Correcting IF 8. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00 HN 0.90 KP 1.01 ! LA 1.00 MK 1.03 NL 1.37 OV 0.89 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.92 FD 0.98 HN 1.07 KP 1.00 ! LA 0.98 NL 1.02 OV 0.99 PT 0.86 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.03 FD 1.03 HN 0.96 KP 1.06 ! LA 1.01 MK 1.00 NL 1.08 OV 0.93 ! PT 0.97 SC 0.99 ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.96 FD 1.05 HN 0.99 KP 1.06 ! LA 1.05 MK 1.02 OV 0.93 PT 0.94 ! SC 1.10 ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.03 FD 1.04 HN 0.92 KP 1.05 ! LA 1.03 OV 0.92 PT 0.93 SC 1.01 ! ! A total of 3 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 0.93 FD 1.03 HN 1.26 KP 1.01 ! MK 1.04 NL 1.03 OV 0.94 SC 1.04 ! ! ! Correcting IF 9. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00 HN 0.89 KP 1.03 ! LA 1.02 MK 1.01 NL 1.41 OV 0.88 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.90 FD 0.98 HN 1.08 KP 1.02 ! LA 0.99 NL 0.98 OV 0.98 PT 0.87 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 FD 1.04 HN 0.96 KP 1.06 ! LA 1.03 MK 0.96 NL 1.09 OV 0.95 ! PT 0.97 SC 0.97 ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.97 FD 1.04 HN 1.01 KP 1.05 ! LA 1.03 MK 1.02 OV 0.93 PT 0.95 ! SC 1.06 ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.04 FD 1.03 HN 0.95 KP 1.06 ! LA 1.02 OV 0.96 PT 0.94 SC 1.01 ! ! A total of 3 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 0.93 FD 1.03 HN 1.34 KP 1.02 ! MK 1.05 NL 1.06 OV 0.93 SC 1.09 ! ! ! Correcting IF 10. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.98 HN 0.93 KP 1.02 ! LA 1.00 MK 1.04 NL 1.58 OV 0.88 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.90 FD 1.00 HN 1.10 KP 1.01 ! LA 0.98 NL 1.01 OV 1.00 PT 0.85 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 FD 1.06 HN 0.98 KP 1.03 ! LA 1.03 MK 1.01 NL 1.06 OV 0.93 ! PT 0.98 SC 0.99 ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.01 FD 1.06 HN 1.04 KP 1.04 ! LA 1.03 MK 1.03 OV 0.93 PT 0.94 ! SC 1.12 ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.04 FD 1.05 HN 0.93 KP 1.04 ! LA 1.02 OV 0.94 PT 0.93 SC 1.05 ! ! A total of 3 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 0.93 FD 1.09 HN 1.30 KP 1.03 ! MK 1.04 NL 1.04 OV 0.94 SC 1.02 ! ! ! Correcting IF 11. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00 HN 0.93 KP 1.05 ! LA 1.02 MK 1.03 NL 1.51 OV 0.87 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 FD 1.02 HN 1.03 KP 1.00 ! LA 0.98 NL 0.99 OV 1.02 PT 0.86 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.01 FD 1.08 HN 0.97 KP 1.05 ! LA 1.01 MK 0.99 NL 1.08 OV 0.94 ! PT 0.95 SC 1.01 ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.99 FD 1.05 HN 1.01 KP 1.06 ! LA 1.03 MK 1.05 OV 0.94 PT 0.96 ! SC 1.13 ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.00 FD 1.02 HN 0.96 KP 1.06 ! LA 1.03 OV 0.93 PT 0.96 SC 1.06 ! ! A total of 3 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 0.92 FD 1.06 HN 1.38 KP 1.01 ! MK 1.04 NL 1.09 OV 0.94 SC 1.08 ! ! ! Correcting IF 12. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00 HN 0.94 KP 0.99 ! LA 1.03 MK 1.01 NL 1.46 OV 0.89 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.92 FD 1.00 HN 1.16 KP 1.01 ! LA 1.00 NL 0.99 OV 0.98 PT 0.85 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 1.02 HN 0.97 KP 1.07 ! LA 1.03 MK 0.99 NL 1.07 OV 0.97 ! PT 0.94 SC 1.00 ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.00 FD 1.06 HN 1.04 KP 1.06 ! LA 1.02 MK 1.07 OV 0.94 PT 0.92 ! SC 1.12 ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.06 FD 1.03 HN 0.95 KP 1.07 ! LA 1.03 OV 0.90 PT 0.92 SC 1.08 ! ! A total of 3 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 0.90 FD 1.07 HN 1.47 KP 1.01 ! MK 1.10 NL 1.08 OV 0.95 SC 1.03 ! ! ! Fit before self-cal, rms=0.099526Jy sigma=0.920098 ! Fit after self-cal, rms=0.078144Jy sigma=0.643033 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8992 mas, bmaj=2.042 mas, bpa=-0.5772 degrees ! Estimated noise=0.580947 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00876614 Jy ! Component: 100 - total flux cleaned = -0.0128587 Jy ! Component: 150 - total flux cleaned = -0.0163811 Jy ! Component: 200 - total flux cleaned = -0.0178306 Jy ! Total flux subtracted in 200 components = -0.0178306 Jy ! Clean residual min=-0.007632 max=0.005976 Jy/beam ! Clean residual mean=0.000000 rms=0.001218 Jy/beam ! Combined flux in latest and established models = 0.902058 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 147 components and 0.902058 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076234Jy sigma=0.625947 ! Fit after self-cal, rms=0.076202Jy sigma=0.625231 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076202Jy sigma=0.625231 ! Fit after self-cal, rms=0.068763Jy sigma=0.584534 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8971 mas, bmaj=2.044 mas, bpa=-0.6302 degrees ! Estimated noise=0.58 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00769682 Jy ! Component: 100 - total flux cleaned = -0.0103024 Jy ! Component: 150 - total flux cleaned = -0.0126453 Jy ! Component: 200 - total flux cleaned = -0.0138934 Jy ! Total flux subtracted in 200 components = -0.0138934 Jy ! Clean residual min=-0.005439 max=0.003970 Jy/beam ! Clean residual mean=0.000001 rms=0.000872 Jy/beam ! Combined flux in latest and established models = 0.888165 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 156 components and 0.888165 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067566Jy sigma=0.570399 ! Fit after self-cal, rms=0.067575Jy sigma=0.570129 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000835573 Jy ! Component: 100 - total flux cleaned = -0.00213426 Jy ! Component: 150 - total flux cleaned = -0.00296028 Jy ! Component: 200 - total flux cleaned = -0.00371921 Jy ! Total flux subtracted in 200 components = -0.00371921 Jy ! Clean residual min=-0.004775 max=0.003705 Jy/beam ! Clean residual mean=0.000001 rms=0.000819 Jy/beam ! Combined flux in latest and established models = 0.884445 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 163 components and 0.884445 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067183Jy sigma=0.565504 ! Fit after self-cal, rms=0.067161Jy sigma=0.565295 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067161Jy sigma=0.565295 ! Fit after self-cal, rms=0.066967Jy sigma=0.560081 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8961 mas, bmaj=2.046 mas, bpa=-0.646 degrees ! Estimated noise=0.579218 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00503944 Jy ! Component: 100 - total flux cleaned = -0.00702206 Jy ! Component: 150 - total flux cleaned = -0.00838366 Jy ! Component: 200 - total flux cleaned = -0.0092526 Jy ! Total flux subtracted in 200 components = -0.0092526 Jy ! Clean residual min=-0.003913 max=0.003298 Jy/beam ! Clean residual mean=0.000001 rms=0.000689 Jy/beam ! Combined flux in latest and established models = 0.875193 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 167 components and 0.875193 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066372Jy sigma=0.552867 ! Fit after self-cal, rms=0.066361Jy sigma=0.552708 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000584259 Jy ! Component: 100 - total flux cleaned = -0.00153164 Jy ! Component: 150 - total flux cleaned = -0.00230709 Jy ! Component: 200 - total flux cleaned = -0.00301872 Jy ! Total flux subtracted in 200 components = -0.00301872 Jy ! Clean residual min=-0.003496 max=0.003132 Jy/beam ! Clean residual mean=0.000001 rms=0.000654 Jy/beam ! Combined flux in latest and established models = 0.872174 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 176 components and 0.872174 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066142Jy sigma=0.550198 ! Fit after self-cal, rms=0.066124Jy sigma=0.550022 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066124Jy sigma=0.550022 ! Fit after self-cal, rms=0.066122Jy sigma=0.547996 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.183 mas, bmaj=3.11 mas, bpa=6.093 degrees ! Estimated noise=0.743753 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00455301 Jy ! Component: 100 - total flux cleaned = -0.00730294 Jy ! Component: 150 - total flux cleaned = -0.00822184 Jy ! Component: 200 - total flux cleaned = -0.00907893 Jy ! Total flux subtracted in 200 components = -0.00907893 Jy ! Clean residual min=-0.004147 max=0.003159 Jy/beam ! Clean residual mean=0.000002 rms=0.000780 Jy/beam ! Combined flux in latest and established models = 0.863095 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 196 components and 0.863095 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065925Jy sigma=0.545325 ! Fit after self-cal, rms=0.065904Jy sigma=0.545192 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000644992 Jy ! Component: 100 - total flux cleaned = -0.00132173 Jy ! Component: 150 - total flux cleaned = -0.00190818 Jy ! Component: 200 - total flux cleaned = -0.00238045 Jy ! Total flux subtracted in 200 components = -0.00238045 Jy ! Clean residual min=-0.003848 max=0.003006 Jy/beam ! Clean residual mean=0.000002 rms=0.000747 Jy/beam ! Combined flux in latest and established models = 0.860715 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 207 components and 0.860715 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065862Jy sigma=0.544475 ! Fit after self-cal, rms=0.065848Jy sigma=0.544359 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8957 mas, bmaj=2.046 mas, bpa=-0.6289 degrees ! Estimated noise=0.578525 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8957 x 2.046 at -0.6289 degrees (North through East) ! Clean map min=-0.0036568 max=0.64691 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065848Jy sigma=0.544359 ! Fit after self-cal, rms=0.060476Jy sigma=0.505042 ! Inverting map and beam ! Estimated beam: bmin=0.8953 mas, bmaj=2.046 mas, bpa=-0.6151 degrees ! Estimated noise=0.577891 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00211594 Jy ! Component: 100 - total flux cleaned = -0.00322203 Jy ! Component: 150 - total flux cleaned = -0.00409041 Jy ! Component: 200 - total flux cleaned = -0.00458556 Jy ! Total flux subtracted in 200 components = -0.00458556 Jy ! Clean residual min=-0.002385 max=0.002742 Jy/beam ! Clean residual mean=0.000000 rms=0.000508 Jy/beam ! Combined flux in latest and established models = 0.856129 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 211 components and 0.856129 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060244Jy sigma=0.502163 ! Fit after self-cal, rms=0.060233Jy sigma=0.502029 ! Inverting map ! Added new window around map position (-0.8, -15.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00154579 Jy ! Component: 100 - total flux cleaned = 0.00132491 Jy ! Component: 150 - total flux cleaned = 0.00112646 Jy ! Component: 200 - total flux cleaned = 0.000941592 Jy ! Total flux subtracted in 200 components = 0.000941592 Jy ! Clean residual min=-0.002171 max=0.002406 Jy/beam ! Clean residual mean=0.000001 rms=0.000488 Jy/beam ! Combined flux in latest and established models = 0.857071 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 222 components and 0.857071 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060062Jy sigma=0.500164 ! Fit after self-cal, rms=0.060048Jy sigma=0.500072 ! Inverting map ! Added new window around map position (-1.4, -6.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00216785 Jy ! Component: 100 - total flux cleaned = 0.00264731 Jy ! Component: 150 - total flux cleaned = 0.00295194 Jy ! Component: 200 - total flux cleaned = 0.00318022 Jy ! Total flux subtracted in 200 components = 0.00318022 Jy ! Clean residual min=-0.001955 max=0.002175 Jy/beam ! Clean residual mean=0.000001 rms=0.000462 Jy/beam ! Combined flux in latest and established models = 0.860251 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 237 components and 0.860251 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059876Jy sigma=0.498606 ! Fit after self-cal, rms=0.059871Jy sigma=0.498551 ! Inverting map ! Added new window around map position (11, 47.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00124003 Jy ! Component: 100 - total flux cleaned = 0.00151661 Jy ! Component: 150 - total flux cleaned = 0.00166944 Jy ! Component: 200 - total flux cleaned = 0.00176741 Jy ! Total flux subtracted in 200 components = 0.00176741 Jy ! Clean residual min=-0.001900 max=0.002091 Jy/beam ! Clean residual mean=0.000001 rms=0.000447 Jy/beam ! Combined flux in latest and established models = 0.862018 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 245 components and 0.862018 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059765Jy sigma=0.497400 ! Fit after self-cal, rms=0.059759Jy sigma=0.497336 ! Inverting map ! Added new window around map position (2.6, 6.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00143245 Jy ! Component: 100 - total flux cleaned = 0.00203736 Jy ! Component: 150 - total flux cleaned = 0.00263531 Jy ! Component: 200 - total flux cleaned = 0.00282261 Jy ! Total flux subtracted in 200 components = 0.00282261 Jy ! Clean residual min=-0.001892 max=0.002059 Jy/beam ! Clean residual mean=0.000000 rms=0.000433 Jy/beam ! Combined flux in latest and established models = 0.864841 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 258 components and 0.864841 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059652Jy sigma=0.496302 ! Fit after self-cal, rms=0.059653Jy sigma=0.496251 ! Inverting map ! Added new window around map position (-5.4, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.59582e-08 Jy ! Component: 100 - total flux cleaned = 0.000110726 Jy ! Component: 150 - total flux cleaned = 0.000364549 Jy ! Component: 200 - total flux cleaned = 0.000554557 Jy ! Total flux subtracted in 200 components = 0.000554557 Jy ! Clean residual min=-0.001761 max=0.001834 Jy/beam ! Clean residual mean=0.000001 rms=0.000413 Jy/beam ! Combined flux in latest and established models = 0.865395 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 272 components and 0.865395 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059530Jy sigma=0.495028 ! Fit after self-cal, rms=0.059527Jy sigma=0.494988 ! Inverting map ! Added new window around map position (-21.6, 26.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00124194 Jy ! Component: 100 - total flux cleaned = 0.0013828 Jy ! Component: 150 - total flux cleaned = 0.00164115 Jy ! Component: 200 - total flux cleaned = 0.00184748 Jy ! Total flux subtracted in 200 components = 0.00184748 Jy ! Clean residual min=-0.001703 max=0.001734 Jy/beam ! Clean residual mean=0.000001 rms=0.000399 Jy/beam ! Combined flux in latest and established models = 0.867243 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 290 components and 0.867243 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059446Jy sigma=0.494224 ! Fit after self-cal, rms=0.059444Jy sigma=0.494196 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059444Jy sigma=0.494196 ! Fit after self-cal, rms=0.059452Jy sigma=0.493373 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.685 mas, bmaj=1.723 mas, bpa=-1.879 degrees ! Estimated noise=0.868323 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.488914 Jy ! Component: 100 - total flux cleaned = 0.618914 Jy ! Component: 150 - total flux cleaned = 0.686132 Jy ! Component: 200 - total flux cleaned = 0.728896 Jy ! Total flux subtracted in 200 components = 0.728896 Jy ! Clean residual min=-0.009878 max=0.022969 Jy/beam ! Clean residual mean=-0.000007 rms=0.001888 Jy/beam ! Combined flux in latest and established models = 0.728896 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.728896 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8952 mas, bmaj=2.047 mas, bpa=-0.5917 degrees ! Estimated noise=0.577831 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0474975 Jy ! Component: 100 - total flux cleaned = 0.0746742 Jy ! Component: 150 - total flux cleaned = 0.0913998 Jy ! Component: 200 - total flux cleaned = 0.102073 Jy ! Total flux subtracted in 200 components = 0.102073 Jy ! Clean residual min=-0.003899 max=0.006075 Jy/beam ! Clean residual mean=-0.000001 rms=0.000814 Jy/beam ! Combined flux in latest and established models = 0.830969 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 55 components and 0.830969 Jy ! Inverting map ! Added new window around map position (0.6, 2.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00726729 Jy ! Component: 100 - total flux cleaned = 0.0124009 Jy ! Component: 150 - total flux cleaned = 0.015627 Jy ! Component: 200 - total flux cleaned = 0.0182109 Jy ! Total flux subtracted in 200 components = 0.0182109 Jy ! Clean residual min=-0.002942 max=0.002857 Jy/beam ! Clean residual mean=-0.000000 rms=0.000529 Jy/beam ! Combined flux in latest and established models = 0.84918 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 86 components and 0.84918 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.185 mas, bmaj=3.114 mas, bpa=6.204 degrees ! Estimated noise=0.742825 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00355018 Jy ! Component: 100 - total flux cleaned = 0.00616197 Jy ! Component: 150 - total flux cleaned = 0.00802099 Jy ! Component: 200 - total flux cleaned = 0.00923489 Jy ! Total flux subtracted in 200 components = 0.00923489 Jy ! Clean residual min=-0.002404 max=0.002372 Jy/beam ! Clean residual mean=0.000000 rms=0.000539 Jy/beam ! Combined flux in latest and established models = 0.858415 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00102024 Jy ! Component: 100 - total flux cleaned = 0.00175592 Jy ! Component: 150 - total flux cleaned = 0.00237348 Jy ! Component: 200 - total flux cleaned = 0.00300703 Jy ! Total flux subtracted in 200 components = 0.00300703 Jy ! Clean residual min=-0.002195 max=0.002062 Jy/beam ! Clean residual mean=0.000001 rms=0.000500 Jy/beam ! Combined flux in latest and established models = 0.861422 Jy ! Adding 65 model components to the UV plane model. ! The established model now contains 145 components and 0.861422 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8952 mas, bmaj=2.047 mas, bpa=-0.5917 degrees ! Estimated noise=0.577831 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00129982 Jy ! Component: 100 - total flux cleaned = -0.0014041 Jy ! Component: 150 - total flux cleaned = -0.00130767 Jy ! Component: 200 - total flux cleaned = -0.00130713 Jy ! Total flux subtracted in 200 components = -0.00130713 Jy ! Clean residual min=-0.002337 max=0.002013 Jy/beam ! Clean residual mean=0.000000 rms=0.000437 Jy/beam ! Combined flux in latest and established models = 0.860115 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 170 components and 0.860115 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059984Jy sigma=0.497928 ! Fit after self-cal, rms=0.059920Jy sigma=0.497195 wmodel J1616+0459_X_a_map.mod ! Writing 170 model components to file: J1616+0459_X_a_map.mod wobs J1616+0459_X_a_uvs.fits ! Writing UV FITS file: J1616+0459_X_a_uvs.fits wwins J1616+0459_X_a_map.win ! wwins: Wrote 13 windows to J1616+0459_X_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000773061 Jy ! Component: 100 - total flux cleaned = -0.0012947 Jy ! Component: 150 - total flux cleaned = -0.00182724 Jy ! Component: 200 - total flux cleaned = -0.00233573 Jy ! Component: 250 - total flux cleaned = -0.00285616 Jy ! Component: 300 - total flux cleaned = -0.00332583 Jy ! Component: 350 - total flux cleaned = -0.00372055 Jy ! Component: 400 - total flux cleaned = -0.00410538 Jy ! Component: 450 - total flux cleaned = -0.00436584 Jy ! Component: 500 - total flux cleaned = -0.0045927 Jy ! Component: 550 - total flux cleaned = -0.00484311 Jy ! Component: 600 - total flux cleaned = -0.00506165 Jy ! Component: 650 - total flux cleaned = -0.00527683 Jy ! Component: 700 - total flux cleaned = -0.00548915 Jy ! Component: 750 - total flux cleaned = -0.00572435 Jy ! Component: 800 - total flux cleaned = -0.0058274 Jy ! Component: 850 - total flux cleaned = -0.00600551 Jy ! Component: 900 - total flux cleaned = -0.00603086 Jy ! Component: 950 - total flux cleaned = -0.00618026 Jy ! Component: 1000 - total flux cleaned = -0.00625374 Jy ! Component: 1050 - total flux cleaned = -0.00639995 Jy ! Component: 1100 - total flux cleaned = -0.00654449 Jy ! Component: 1150 - total flux cleaned = -0.00663982 Jy ! Component: 1200 - total flux cleaned = -0.00673442 Jy ! Component: 1250 - total flux cleaned = -0.0068514 Jy ! Component: 1300 - total flux cleaned = -0.00694447 Jy ! Component: 1350 - total flux cleaned = -0.00701329 Jy ! Component: 1400 - total flux cleaned = -0.00708207 Jy ! Component: 1450 - total flux cleaned = -0.00712712 Jy ! Component: 1500 - total flux cleaned = -0.00719454 Jy ! Component: 1550 - total flux cleaned = -0.00723904 Jy ! Component: 1600 - total flux cleaned = -0.00723897 Jy ! Component: 1650 - total flux cleaned = -0.00737026 Jy ! Component: 1700 - total flux cleaned = -0.00737029 Jy ! Component: 1750 - total flux cleaned = -0.00745652 Jy ! Component: 1800 - total flux cleaned = -0.00741352 Jy ! Component: 1850 - total flux cleaned = -0.00747691 Jy ! Component: 1900 - total flux cleaned = -0.00749804 Jy ! Component: 1950 - total flux cleaned = -0.00758162 Jy ! Component: 2000 - total flux cleaned = -0.00758155 Jy ! Component: 2050 - total flux cleaned = -0.00756065 Jy ! Component: 2100 - total flux cleaned = -0.00762214 Jy ! Component: 2150 - total flux cleaned = -0.00754039 Jy ! Component: 2200 - total flux cleaned = -0.00764175 Jy ! Component: 2250 - total flux cleaned = -0.00758114 Jy ! Component: 2300 - total flux cleaned = -0.00758098 Jy ! Component: 2350 - total flux cleaned = -0.00758097 Jy ! Component: 2400 - total flux cleaned = -0.00756115 Jy ! Component: 2450 - total flux cleaned = -0.00756116 Jy ! Component: 2500 - total flux cleaned = -0.00760013 Jy ! Component: 2550 - total flux cleaned = -0.00756122 Jy ! Component: 2600 - total flux cleaned = -0.0075419 Jy ! Component: 2650 - total flux cleaned = -0.0075993 Jy ! Component: 2700 - total flux cleaned = -0.00752315 Jy ! Component: 2750 - total flux cleaned = -0.00746622 Jy ! Component: 2800 - total flux cleaned = -0.00752274 Jy ! Component: 2850 - total flux cleaned = -0.00744785 Jy ! Component: 2900 - total flux cleaned = -0.00737341 Jy ! Component: 2950 - total flux cleaned = -0.00741025 Jy ! Component: 3000 - total flux cleaned = -0.00741033 Jy ! Component: 3050 - total flux cleaned = -0.00726385 Jy ! Component: 3100 - total flux cleaned = -0.00726369 Jy ! Component: 3150 - total flux cleaned = -0.00719121 Jy ! Component: 3200 - total flux cleaned = -0.00715526 Jy ! Component: 3250 - total flux cleaned = -0.00715516 Jy ! Component: 3300 - total flux cleaned = -0.00706592 Jy ! Component: 3350 - total flux cleaned = -0.0070483 Jy ! Component: 3400 - total flux cleaned = -0.00699549 Jy ! Component: 3450 - total flux cleaned = -0.00694276 Jy ! Component: 3500 - total flux cleaned = -0.00689029 Jy ! Component: 3550 - total flux cleaned = -0.00694245 Jy ! Component: 3600 - total flux cleaned = -0.00682134 Jy ! Component: 3650 - total flux cleaned = -0.0068211 Jy ! Component: 3700 - total flux cleaned = -0.00676972 Jy ! Component: 3750 - total flux cleaned = -0.00670159 Jy ! Component: 3800 - total flux cleaned = -0.00668459 Jy ! Component: 3850 - total flux cleaned = -0.00665081 Jy ! Component: 3900 - total flux cleaned = -0.00655003 Jy ! Component: 3950 - total flux cleaned = -0.00653325 Jy ! Component: 4000 - total flux cleaned = -0.00646675 Jy ! Component: 4050 - total flux cleaned = -0.00648338 Jy ! Total flux subtracted in 4096 components = -0.00640087 Jy ! Clean residual min=-0.001071 max=0.000977 Jy/beam ! Clean residual mean=0.000000 rms=0.000289 Jy/beam ! Combined flux in latest and established models = 0.853714 Jy keep ! Adding 311 model components to the UV plane model. ! The established model now contains 472 components and 0.853714 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uvm//J1616+0459_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8952 x 2.047 at -0.5917 degrees (North through East) ! Clean map min=-0.0020441 max=0.6506 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uvm//J1616+0459_X_a_map.fits wmodel /image_prod/ug002_uvm//J1616+0459_X_a_map.mod ! Writing 472 model components to file: /image_prod/ug002_uvm//J1616+0459_X_a_map.mod wobs /image_prod/ug002_uvm//J1616+0459_X_a_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uvm//J1616+0459_X_a_uvs.fits wwins /image_prod/ug002_uvm//J1616+0459_X_a_map.win ! wwins: Wrote 14 windows to /image_prod/ug002_uvm//J1616+0459_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.650599 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000288768 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.133155 0.133155 0.26631 0.532619 1.06524 2.13048 4.26095 8.52191 17.0438 34.0876 68.1753 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.65 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2253.02 quit ! Quitting program ! Log file /image_prod/ug002_uvm//J1616+0459_X_a_dfm.log closed on Wed Mar 4 17:26:55 2020