! Started logfile: /image_prod/ug002_uvm//J1608+1029_X_a_dfm.log on Wed Mar 4 17:26:01 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uvm//J1608+1029_X_a_uvm.fits ! Reading UV FITS file: /image_prod/ug002_uvm//J1608+1029_X_a_uvm.fits ! AN table 1: 6 integrations on 36 of 36 possible baselines. ! AN table 2: 12 integrations on 28 of 28 possible baselines. ! AN table 3: 18 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.84141 visibilities/baseline/integration-bin. ! Found source: J1608+1029 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 121 lines of history. ! ! Reading 13752 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1608+1029_X_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! A total of 12 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! A total of 12 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! A total of 12 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! A total of 12 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 5. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! A total of 12 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 6. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! A total of 12 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 7. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! A total of 12 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 8. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! A total of 12 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 9. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! A total of 12 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 10. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! A total of 12 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 11. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! A total of 12 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 12. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! A total of 12 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=1.377905Jy sigma=11.067797 ! Fit after self-cal, rms=0.170154Jy sigma=1.353479 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6989 mas, bmaj=1.736 mas, bpa=-4.26 degrees ! Estimated noise=1.09608 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.730526 Jy ! Component: 100 - total flux cleaned = 0.891305 Jy ! Total flux subtracted in 100 components = 0.891305 Jy ! Clean residual min=-0.030204 max=0.056436 Jy/beam ! Clean residual mean=0.000001 rms=0.005101 Jy/beam ! Combined flux in latest and established models = 0.891306 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.891306 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.178019Jy sigma=1.392653 ! Fit after self-cal, rms=0.177994Jy sigma=1.392453 ! Inverting map ! Added new window around map position (-1.2, 1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0613821 Jy ! Component: 100 - total flux cleaned = 0.0993392 Jy ! Total flux subtracted in 100 components = 0.0993392 Jy ! Clean residual min=-0.027497 max=0.032912 Jy/beam ! Clean residual mean=0.000005 rms=0.004097 Jy/beam ! Combined flux in latest and established models = 0.990645 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 12 components and 0.990645 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.147556Jy sigma=1.143268 ! Fit after self-cal, rms=0.146792Jy sigma=1.135978 ! Inverting map ! Added new window around map position (2, 0.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0317931 Jy ! Component: 100 - total flux cleaned = 0.0541888 Jy ! Total flux subtracted in 100 components = 0.0541888 Jy ! Clean residual min=-0.023362 max=0.024892 Jy/beam ! Clean residual mean=0.000008 rms=0.003675 Jy/beam ! Combined flux in latest and established models = 1.04483 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 20 components and 1.04483 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.136704Jy sigma=1.047261 ! Fit after self-cal, rms=0.136575Jy sigma=1.046342 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8813 mas, bmaj=2.064 mas, bpa=-5.018 degrees ! Estimated noise=0.795055 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (6.6, -8.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0299821 Jy ! Component: 100 - total flux cleaned = 0.0503569 Jy ! Component: 150 - total flux cleaned = 0.0663313 Jy ! Component: 200 - total flux cleaned = 0.0792581 Jy ! Total flux subtracted in 200 components = 0.0792581 Jy ! Clean residual min=-0.022302 max=0.025055 Jy/beam ! Clean residual mean=0.000011 rms=0.004401 Jy/beam ! Combined flux in latest and established models = 1.12409 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 53 components and 1.12409 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.127798Jy sigma=0.967725 ! Fit after self-cal, rms=0.127287Jy sigma=0.962752 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8813 x 2.064 at -5.018 degrees (North through East) ! Clean map min=-0.021177 max=0.93379 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.03 HN 0.92 KP 1.08 ! LA 0.99 MK 1.04 NL 1.08 OV 0.97 ! PT 0.90 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 1.02 HN 0.93 KP 1.08 ! LA 1.05 MK 1.09 NL 1.42 OV 0.92 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.95 FD 1.00 HN 0.98 KP 1.04 ! LA 0.96 MK 1.02 NL 1.02 OV 0.99 ! PT 0.88 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.03 HN 0.93 KP 1.07 ! LA 0.98 MK 1.03 NL 1.10 OV 0.94 ! PT 0.92 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 1.02 HN 0.93 KP 1.05 ! LA 1.04 MK 1.10 NL 1.39 OV 0.93 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.95 FD 0.98 HN 0.98 KP 1.04 ! LA 0.95 MK 1.02 NL 1.03 OV 0.99 ! PT 0.87 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.03 HN 0.96 KP 1.07 ! LA 0.98 MK 1.04 NL 1.12 OV 0.94 ! PT 0.91 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.01 HN 0.97 KP 1.06 ! LA 1.03 MK 1.09 NL 1.36 OV 0.94 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.95 FD 0.97 HN 0.99 KP 1.04 ! LA 0.97 MK 0.98 NL 1.02 OV 0.99 ! PT 0.87 SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.00 HN 0.94 KP 1.08 ! LA 0.99 MK 1.04 NL 1.10 OV 0.95 ! PT 0.91 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.03 HN 0.95 KP 1.05 ! LA 1.03 MK 1.10 NL 1.37 OV 0.93 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.95 FD 0.97 HN 0.96 KP 1.04 ! LA 0.97 MK 1.01 NL 1.01 OV 1.00 ! PT 0.87 SC 1.00 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.02 HN 0.92 KP 1.06 ! LA 0.97 MK 1.02 NL 1.10 OV 0.96 ! PT 0.96 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 1.04 HN 0.94 KP 1.04 ! LA 1.05 MK 1.11 NL 1.45 OV 0.91 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.96 FD 0.98 HN 0.98 KP 1.05 ! LA 0.97 MK 1.01 NL 1.02 OV 1.00 ! PT 0.87 SC 0.99 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.03 HN 0.92 KP 1.06 ! LA 0.99 MK 1.01 NL 1.10 OV 0.93 ! PT 0.91 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 1.02 HN 0.94 KP 1.05 ! LA 1.02 MK 1.10 NL 1.47 OV 0.93 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.96 FD 0.98 HN 0.99 KP 1.03 ! LA 0.96 MK 1.02 NL 1.02 OV 0.99 ! PT 0.88 SC 1.00 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.03 HN 0.92 KP 1.06 ! LA 0.98 MK 1.01 NL 1.08 OV 0.93 ! PT 0.91 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 1.03 HN 0.93 KP 1.05 ! LA 1.03 MK 1.12 NL 1.39 OV 0.92 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.95 FD 0.99 HN 0.99 KP 1.04 ! LA 0.98 MK 1.01 NL 1.03 OV 0.99 ! PT 0.87 SC 1.01 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.00 HN 0.91 KP 1.05 ! LA 1.00 MK 1.01 NL 1.11 OV 0.94 ! PT 0.90 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 1.04 HN 0.94 KP 1.03 ! LA 1.04 MK 1.10 NL 1.40 OV 0.91 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.97 FD 0.98 HN 0.99 KP 1.04 ! LA 0.97 MK 1.02 NL 1.02 OV 0.98 ! PT 0.86 SC 1.01 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.00 HN 0.92 KP 1.03 ! LA 0.99 MK 1.01 NL 1.06 OV 0.93 ! PT 0.92 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 1.02 HN 0.92 KP 1.06 ! LA 1.06 MK 1.10 NL 1.44 OV 0.90 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.95 FD 0.99 HN 1.01 KP 1.04 ! LA 0.97 MK 1.02 NL 1.01 OV 0.99 ! PT 0.88 SC 0.99 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.02 HN 0.93 KP 1.05 ! LA 0.98 MK 1.00 NL 1.07 OV 0.93 ! PT 0.90 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 1.03 HN 0.93 KP 1.05 ! LA 1.03 MK 1.11 NL 1.50 OV 0.91 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.96 FD 0.99 HN 1.01 KP 1.03 ! LA 0.97 MK 1.02 NL 1.02 OV 0.99 ! PT 0.87 SC 0.98 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.03 HN 0.91 KP 1.07 ! LA 0.97 MK 0.98 NL 1.05 OV 0.94 ! PT 0.91 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.03 HN 0.95 KP 1.04 ! LA 1.07 MK 1.08 NL 1.42 OV 0.91 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.97 FD 0.99 HN 1.01 KP 1.04 ! LA 0.97 MK 1.04 NL 1.02 OV 1.00 ! PT 0.87 SC 0.99 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.02 HN 0.92 KP 1.06 ! LA 1.00 MK 1.02 NL 1.07 OV 0.92 ! PT 0.91 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.02 HN 0.97 KP 1.02 ! LA 1.05 MK 1.18 NL 1.38 OV 0.93 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.95 FD 0.99 HN 1.03 KP 1.00 ! LA 0.96 MK 1.03 NL 1.01 OV 1.01 ! PT 0.86 SC 1.01 ! ! ! Fit before self-cal, rms=0.127287Jy sigma=0.962752 ! Fit after self-cal, rms=0.077575Jy sigma=0.585874 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8825 mas, bmaj=2.06 mas, bpa=-4.675 degrees ! Estimated noise=0.791351 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0025052 Jy ! Component: 100 - total flux cleaned = -0.00315206 Jy ! Component: 150 - total flux cleaned = -0.00365281 Jy ! Component: 200 - total flux cleaned = -0.00518189 Jy ! Total flux subtracted in 200 components = -0.00518189 Jy ! Clean residual min=-0.007183 max=0.008235 Jy/beam ! Clean residual mean=0.000005 rms=0.001511 Jy/beam ! Combined flux in latest and established models = 1.11891 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 70 components and 1.11891 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074460Jy sigma=0.569221 ! Fit after self-cal, rms=0.074356Jy sigma=0.567902 ! Inverting map ! Added new window around map position (-2.4, 2.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00744507 Jy ! Component: 100 - total flux cleaned = 0.00860461 Jy ! Component: 150 - total flux cleaned = 0.00781569 Jy ! Component: 200 - total flux cleaned = 0.00678884 Jy ! Total flux subtracted in 200 components = 0.00678884 Jy ! Clean residual min=-0.005910 max=0.006583 Jy/beam ! Clean residual mean=0.000006 rms=0.001408 Jy/beam ! Combined flux in latest and established models = 1.1257 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 88 components and 1.1257 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072758Jy sigma=0.558372 ! Fit after self-cal, rms=0.072693Jy sigma=0.557879 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072693Jy sigma=0.557879 ! Fit after self-cal, rms=0.061324Jy sigma=0.479662 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8827 mas, bmaj=2.057 mas, bpa=-4.666 degrees ! Estimated noise=0.790635 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00503094 Jy ! Component: 100 - total flux cleaned = -0.00714934 Jy ! Component: 150 - total flux cleaned = -0.00822242 Jy ! Component: 200 - total flux cleaned = -0.0084534 Jy ! Total flux subtracted in 200 components = -0.0084534 Jy ! Clean residual min=-0.004377 max=0.004778 Jy/beam ! Clean residual mean=0.000000 rms=0.000780 Jy/beam ! Combined flux in latest and established models = 1.11725 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 102 components and 1.11725 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060556Jy sigma=0.473276 ! Fit after self-cal, rms=0.060515Jy sigma=0.472980 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.4, 8.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00307889 Jy ! Component: 100 - total flux cleaned = 0.0038291 Jy ! Component: 150 - total flux cleaned = 0.00421564 Jy ! Component: 200 - total flux cleaned = 0.00447732 Jy ! Total flux subtracted in 200 components = 0.00447732 Jy ! Clean residual min=-0.004032 max=0.003267 Jy/beam ! Clean residual mean=0.000000 rms=0.000727 Jy/beam ! Combined flux in latest and established models = 1.12172 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 124 components and 1.12172 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060120Jy sigma=0.469682 ! Fit after self-cal, rms=0.060110Jy sigma=0.469612 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060110Jy sigma=0.469612 ! Fit after self-cal, rms=0.059894Jy sigma=0.468012 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8826 mas, bmaj=2.056 mas, bpa=-4.626 degrees ! Estimated noise=0.789764 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00382998 Jy ! Component: 100 - total flux cleaned = -0.00491077 Jy ! Component: 150 - total flux cleaned = -0.00483118 Jy ! Component: 200 - total flux cleaned = -0.00483184 Jy ! Total flux subtracted in 200 components = -0.00483184 Jy ! Clean residual min=-0.003597 max=0.003210 Jy/beam ! Clean residual mean=-0.000000 rms=0.000655 Jy/beam ! Combined flux in latest and established models = 1.11689 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 136 components and 1.11689 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059552Jy sigma=0.465328 ! Fit after self-cal, rms=0.059543Jy sigma=0.465272 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000180456 Jy ! Component: 100 - total flux cleaned = -0.000245913 Jy ! Component: 150 - total flux cleaned = -0.000116858 Jy ! Component: 200 - total flux cleaned = -5.40967e-05 Jy ! Total flux subtracted in 200 components = -5.40967e-05 Jy ! Clean residual min=-0.003366 max=0.003066 Jy/beam ! Clean residual mean=-0.000000 rms=0.000640 Jy/beam ! Combined flux in latest and established models = 1.11684 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 145 components and 1.11684 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059412Jy sigma=0.464239 ! Fit after self-cal, rms=0.059408Jy sigma=0.464217 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059408Jy sigma=0.464217 ! Fit after self-cal, rms=0.059275Jy sigma=0.463235 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.094 mas, bmaj=3.017 mas, bpa=-6.874 degrees ! Estimated noise=1.03034 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0015604 Jy ! Component: 100 - total flux cleaned = -0.00203112 Jy ! Component: 150 - total flux cleaned = -0.00203417 Jy ! Component: 200 - total flux cleaned = -0.00209144 Jy ! Total flux subtracted in 200 components = -0.00209144 Jy ! Clean residual min=-0.003421 max=0.004138 Jy/beam ! Clean residual mean=0.000001 rms=0.000889 Jy/beam ! Combined flux in latest and established models = 1.11475 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 174 components and 1.11475 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059134Jy sigma=0.462361 ! Fit after self-cal, rms=0.059127Jy sigma=0.462295 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.2, -7.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00285232 Jy ! Component: 100 - total flux cleaned = 0.00303683 Jy ! Component: 150 - total flux cleaned = 0.00311214 Jy ! Component: 200 - total flux cleaned = 0.00283777 Jy ! Total flux subtracted in 200 components = 0.00283777 Jy ! Clean residual min=-0.003013 max=0.002793 Jy/beam ! Clean residual mean=0.000000 rms=0.000813 Jy/beam ! Combined flux in latest and established models = 1.11758 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 215 components and 1.11758 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058936Jy sigma=0.460688 ! Fit after self-cal, rms=0.058929Jy sigma=0.460631 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8824 mas, bmaj=2.055 mas, bpa=-4.591 degrees ! Estimated noise=0.789132 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8824 x 2.055 at -4.591 degrees (North through East) ! Clean map min=-0.0029443 max=0.93028 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058929Jy sigma=0.460631 ! Fit after self-cal, rms=0.055445Jy sigma=0.429975 ! Inverting map and beam ! Estimated beam: bmin=0.8824 mas, bmaj=2.056 mas, bpa=-4.595 degrees ! Estimated noise=0.788855 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00158486 Jy ! Component: 100 - total flux cleaned = -0.0019327 Jy ! Component: 150 - total flux cleaned = -0.00208658 Jy ! Component: 200 - total flux cleaned = -0.00209007 Jy ! Total flux subtracted in 200 components = -0.00209007 Jy ! Clean residual min=-0.002428 max=0.001999 Jy/beam ! Clean residual mean=-0.000001 rms=0.000515 Jy/beam ! Combined flux in latest and established models = 1.11549 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 233 components and 1.11549 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055228Jy sigma=0.427830 ! Fit after self-cal, rms=0.055222Jy sigma=0.427791 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.12872e-06 Jy ! Component: 100 - total flux cleaned = -0.000191016 Jy ! Component: 150 - total flux cleaned = -0.00018986 Jy ! Component: 200 - total flux cleaned = -0.000296032 Jy ! Total flux subtracted in 200 components = -0.000296032 Jy ! Clean residual min=-0.002289 max=0.001964 Jy/beam ! Clean residual mean=-0.000001 rms=0.000499 Jy/beam ! Combined flux in latest and established models = 1.1152 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 245 components and 1.1152 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055115Jy sigma=0.426787 ! Fit after self-cal, rms=0.055112Jy sigma=0.426770 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055112Jy sigma=0.426770 ! Fit after self-cal, rms=0.055048Jy sigma=0.426469 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7008 mas, bmaj=1.726 mas, bpa=-3.743 degrees ! Estimated noise=1.08697 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.724073 Jy ! Component: 100 - total flux cleaned = 0.882878 Jy ! Component: 150 - total flux cleaned = 0.940579 Jy ! Component: 200 - total flux cleaned = 0.975247 Jy ! Total flux subtracted in 200 components = 0.975247 Jy ! Clean residual min=-0.008350 max=0.018176 Jy/beam ! Clean residual mean=-0.000006 rms=0.001687 Jy/beam ! Combined flux in latest and established models = 0.975247 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.975247 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8823 mas, bmaj=2.055 mas, bpa=-4.579 degrees ! Estimated noise=0.788465 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0346366 Jy ! Component: 100 - total flux cleaned = 0.0561594 Jy ! Component: 150 - total flux cleaned = 0.0712303 Jy ! Component: 200 - total flux cleaned = 0.0825509 Jy ! Total flux subtracted in 200 components = 0.0825509 Jy ! Clean residual min=-0.004269 max=0.006652 Jy/beam ! Clean residual mean=-0.000006 rms=0.001084 Jy/beam ! Combined flux in latest and established models = 1.0578 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 48 components and 1.0578 Jy ! Inverting map ! Added new window around map position (-2, -0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0087791 Jy ! Component: 100 - total flux cleaned = 0.0157598 Jy ! Component: 150 - total flux cleaned = 0.0214376 Jy ! Component: 200 - total flux cleaned = 0.026161 Jy ! Total flux subtracted in 200 components = 0.026161 Jy ! Clean residual min=-0.003303 max=0.003615 Jy/beam ! Clean residual mean=-0.000003 rms=0.000731 Jy/beam ! Combined flux in latest and established models = 1.08396 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 69 components and 1.08396 Jy ! Inverting map ! Added new window around map position (-12.4, 11.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00403513 Jy ! Component: 100 - total flux cleaned = 0.00650599 Jy ! Component: 150 - total flux cleaned = 0.00885093 Jy ! Component: 200 - total flux cleaned = 0.0109817 Jy ! Total flux subtracted in 200 components = 0.0109817 Jy ! Clean residual min=-0.002749 max=0.002628 Jy/beam ! Clean residual mean=-0.000002 rms=0.000619 Jy/beam ! Combined flux in latest and established models = 1.09494 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 100 components and 1.09494 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.095 mas, bmaj=3.017 mas, bpa=-6.832 degrees ! Estimated noise=1.0292 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00438475 Jy ! Component: 100 - total flux cleaned = 0.00785071 Jy ! Component: 150 - total flux cleaned = 0.0102071 Jy ! Component: 200 - total flux cleaned = 0.0114533 Jy ! Total flux subtracted in 200 components = 0.0114533 Jy ! Clean residual min=-0.002838 max=0.002956 Jy/beam ! Clean residual mean=-0.000001 rms=0.000789 Jy/beam ! Combined flux in latest and established models = 1.10639 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000658122 Jy ! Component: 100 - total flux cleaned = 0.0010874 Jy ! Component: 150 - total flux cleaned = 0.00155478 Jy ! Component: 200 - total flux cleaned = 0.00184412 Jy ! Total flux subtracted in 200 components = 0.00184412 Jy ! Clean residual min=-0.002611 max=0.002461 Jy/beam ! Clean residual mean=-0.000001 rms=0.000721 Jy/beam ! Combined flux in latest and established models = 1.10824 Jy ! Adding 77 model components to the UV plane model. ! The established model now contains 166 components and 1.10824 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8823 mas, bmaj=2.055 mas, bpa=-4.579 degrees ! Estimated noise=0.788465 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000926563 Jy ! Component: 100 - total flux cleaned = -0.00117775 Jy ! Component: 150 - total flux cleaned = -0.00132907 Jy ! Component: 200 - total flux cleaned = -0.0011816 Jy ! Total flux subtracted in 200 components = -0.0011816 Jy ! Clean residual min=-0.002205 max=0.002008 Jy/beam ! Clean residual mean=-0.000001 rms=0.000494 Jy/beam ! Combined flux in latest and established models = 1.10706 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 191 components and 1.10706 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055086Jy sigma=0.426818 ! Fit after self-cal, rms=0.055045Jy sigma=0.426432 wmodel J1608+1029_X_a_map.mod ! Writing 191 model components to file: J1608+1029_X_a_map.mod wobs J1608+1029_X_a_uvs.fits ! Writing UV FITS file: J1608+1029_X_a_uvs.fits wwins J1608+1029_X_a_map.win ! wwins: Wrote 9 windows to J1608+1029_X_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000840957 Jy ! Component: 100 - total flux cleaned = -0.00154074 Jy ! Component: 150 - total flux cleaned = -0.00189194 Jy ! Component: 200 - total flux cleaned = -0.00199253 Jy ! Component: 250 - total flux cleaned = -0.00205783 Jy ! Component: 300 - total flux cleaned = -0.001995 Jy ! Component: 350 - total flux cleaned = -0.00205672 Jy ! Component: 400 - total flux cleaned = -0.00196549 Jy ! Component: 450 - total flux cleaned = -0.00196576 Jy ! Component: 500 - total flux cleaned = -0.00193599 Jy ! Component: 550 - total flux cleaned = -0.00190649 Jy ! Component: 600 - total flux cleaned = -0.00184932 Jy ! Component: 650 - total flux cleaned = -0.00190612 Jy ! Component: 700 - total flux cleaned = -0.00190629 Jy ! Component: 750 - total flux cleaned = -0.00193368 Jy ! Component: 800 - total flux cleaned = -0.00198797 Jy ! Component: 850 - total flux cleaned = -0.00204127 Jy ! Component: 900 - total flux cleaned = -0.00206758 Jy ! Component: 950 - total flux cleaned = -0.00217237 Jy ! Component: 1000 - total flux cleaned = -0.00219795 Jy ! Component: 1050 - total flux cleaned = -0.00222314 Jy ! Component: 1100 - total flux cleaned = -0.00217252 Jy ! Component: 1150 - total flux cleaned = -0.00222271 Jy ! Component: 1200 - total flux cleaned = -0.00219771 Jy ! Component: 1250 - total flux cleaned = -0.00224676 Jy ! Component: 1300 - total flux cleaned = -0.00222282 Jy ! Component: 1350 - total flux cleaned = -0.00227102 Jy ! Component: 1400 - total flux cleaned = -0.00234253 Jy ! Component: 1450 - total flux cleaned = -0.00243715 Jy ! Component: 1500 - total flux cleaned = -0.0024371 Jy ! Component: 1550 - total flux cleaned = -0.00255327 Jy ! Component: 1600 - total flux cleaned = -0.00264548 Jy ! Component: 1650 - total flux cleaned = -0.00262254 Jy ! Component: 1700 - total flux cleaned = -0.0026678 Jy ! Component: 1750 - total flux cleaned = -0.00287064 Jy ! Component: 1800 - total flux cleaned = -0.00287089 Jy ! Component: 1850 - total flux cleaned = -0.00291539 Jy ! Component: 1900 - total flux cleaned = -0.0030694 Jy ! Component: 1950 - total flux cleaned = -0.00317869 Jy ! Component: 2000 - total flux cleaned = -0.00319999 Jy ! Component: 2050 - total flux cleaned = -0.00332939 Jy ! Component: 2100 - total flux cleaned = -0.00339346 Jy ! Component: 2150 - total flux cleaned = -0.00347833 Jy ! Component: 2200 - total flux cleaned = -0.00356277 Jy ! Component: 2250 - total flux cleaned = -0.00366755 Jy ! Component: 2300 - total flux cleaned = -0.00375093 Jy ! Component: 2350 - total flux cleaned = -0.00383366 Jy ! Component: 2400 - total flux cleaned = -0.003957 Jy ! Component: 2450 - total flux cleaned = -0.00403841 Jy ! Component: 2500 - total flux cleaned = -0.0040589 Jy ! Component: 2550 - total flux cleaned = -0.0040588 Jy ! Component: 2600 - total flux cleaned = -0.00413903 Jy ! Component: 2650 - total flux cleaned = -0.00415903 Jy ! Component: 2700 - total flux cleaned = -0.00413917 Jy ! Component: 2750 - total flux cleaned = -0.00417858 Jy ! Component: 2800 - total flux cleaned = -0.00423734 Jy ! Component: 2850 - total flux cleaned = -0.00419838 Jy ! Component: 2900 - total flux cleaned = -0.00425653 Jy ! Component: 2950 - total flux cleaned = -0.00431419 Jy ! Component: 3000 - total flux cleaned = -0.0043142 Jy ! Component: 3050 - total flux cleaned = -0.00437139 Jy ! Component: 3100 - total flux cleaned = -0.00440915 Jy ! Component: 3150 - total flux cleaned = -0.00437168 Jy ! Component: 3200 - total flux cleaned = -0.00442779 Jy ! Component: 3250 - total flux cleaned = -0.00444626 Jy ! Component: 3300 - total flux cleaned = -0.0045387 Jy ! Component: 3350 - total flux cleaned = -0.00453867 Jy ! Component: 3400 - total flux cleaned = -0.00448377 Jy ! Component: 3450 - total flux cleaned = -0.00448386 Jy ! Component: 3500 - total flux cleaned = -0.00452018 Jy ! Component: 3550 - total flux cleaned = -0.00455644 Jy ! Component: 3600 - total flux cleaned = -0.00455646 Jy ! Component: 3650 - total flux cleaned = -0.00461011 Jy ! Component: 3700 - total flux cleaned = -0.00462802 Jy ! Component: 3750 - total flux cleaned = -0.00464581 Jy ! Component: 3800 - total flux cleaned = -0.00473379 Jy ! Component: 3850 - total flux cleaned = -0.00469882 Jy ! Component: 3900 - total flux cleaned = -0.00471626 Jy ! Component: 3950 - total flux cleaned = -0.00473343 Jy ! Component: 4000 - total flux cleaned = -0.00475046 Jy ! Component: 4050 - total flux cleaned = -0.00469883 Jy ! Total flux subtracted in 4096 components = -0.00475013 Jy ! Clean residual min=-0.000949 max=0.001035 Jy/beam ! Clean residual mean=-0.000000 rms=0.000311 Jy/beam ! Combined flux in latest and established models = 1.10231 Jy keep ! Adding 340 model components to the UV plane model. ! The established model now contains 530 components and 1.10231 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uvm//J1608+1029_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8823 x 2.055 at -4.579 degrees (North through East) ! Clean map min=-0.0024657 max=0.93231 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uvm//J1608+1029_X_a_map.fits wmodel /image_prod/ug002_uvm//J1608+1029_X_a_map.mod ! Writing 530 model components to file: /image_prod/ug002_uvm//J1608+1029_X_a_map.mod wobs /image_prod/ug002_uvm//J1608+1029_X_a_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uvm//J1608+1029_X_a_uvs.fits wwins /image_prod/ug002_uvm//J1608+1029_X_a_map.win ! wwins: Wrote 10 windows to /image_prod/ug002_uvm//J1608+1029_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.93231 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000310805 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.100011 0.100011 0.200023 0.400045 0.800091 1.60018 3.20036 6.40073 12.8015 25.6029 51.2058 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.932 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2999.66 quit ! Quitting program ! Log file /image_prod/ug002_uvm//J1608+1029_X_a_dfm.log closed on Wed Mar 4 17:26:08 2020