! Started logfile: /image_prod/ug002_uvm//J1548+7845_X_a_dfm.log on Wed Mar 4 17:24:13 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uvm//J1548+7845_X_a_uvm.fits ! Reading UV FITS file: /image_prod/ug002_uvm//J1548+7845_X_a_uvm.fits ! AN table 1: 50 integrations on 28 of 28 possible baselines. ! AN table 2: 150 integrations on 28 of 28 possible baselines. ! AN table 3: 75 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.888554 visibilities/baseline/integration-bin. ! Found source: J1548+7845 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 121 lines of history. ! ! Reading 88500 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1548+7845_X_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 50 telescope corrections were flagged in sub-array 2. ! A total of 75 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 50 telescope corrections were flagged in sub-array 2. ! A total of 75 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 50 telescope corrections were flagged in sub-array 2. ! A total of 75 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 50 telescope corrections were flagged in sub-array 2. ! A total of 75 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 5. ! A total of 50 telescope corrections were flagged in sub-array 2. ! A total of 75 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 6. ! A total of 50 telescope corrections were flagged in sub-array 2. ! A total of 75 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 7. ! A total of 50 telescope corrections were flagged in sub-array 2. ! A total of 75 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 8. ! A total of 50 telescope corrections were flagged in sub-array 2. ! A total of 75 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 9. ! A total of 50 telescope corrections were flagged in sub-array 2. ! A total of 75 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 10. ! A total of 50 telescope corrections were flagged in sub-array 2. ! A total of 75 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 11. ! A total of 50 telescope corrections were flagged in sub-array 2. ! A total of 75 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 12. ! A total of 50 telescope corrections were flagged in sub-array 2. ! A total of 75 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=1.002003Jy sigma=9.080787 ! Fit after self-cal, rms=0.960355Jy sigma=8.700241 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.657 mas, bmaj=0.892 mas, bpa=-82.96 degrees ! Estimated noise=0.696623 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0305172 Jy ! Component: 100 - total flux cleaned = 0.0376256 Jy ! Total flux subtracted in 100 components = 0.0376256 Jy ! Clean residual min=-0.002157 max=0.003448 Jy/beam ! Clean residual mean=0.000000 rms=0.000456 Jy/beam ! Combined flux in latest and established models = 0.0376256 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.0376256 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056436Jy sigma=0.486045 ! Fit after self-cal, rms=0.054940Jy sigma=0.472390 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00485643 Jy ! Component: 100 - total flux cleaned = 0.00713218 Jy ! Total flux subtracted in 100 components = 0.00713218 Jy ! Clean residual min=-0.001798 max=0.003572 Jy/beam ! Clean residual mean=-0.000000 rms=0.000417 Jy/beam ! Combined flux in latest and established models = 0.0447578 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0447578 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054450Jy sigma=0.467374 ! Fit after self-cal, rms=0.054459Jy sigma=0.467253 ! Inverting map ! Added new window around map position (2.6, 1.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00311406 Jy ! Component: 100 - total flux cleaned = 0.00484432 Jy ! Total flux subtracted in 100 components = 0.00484432 Jy ! Clean residual min=-0.001907 max=0.001921 Jy/beam ! Clean residual mean=-0.000000 rms=0.000398 Jy/beam ! Combined flux in latest and established models = 0.0496021 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 14 components and 0.0496021 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054231Jy sigma=0.464811 ! Fit after self-cal, rms=0.054191Jy sigma=0.464357 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8947 mas, bmaj=1.222 mas, bpa=-80.56 degrees ! Estimated noise=0.266354 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00244108 Jy ! Component: 100 - total flux cleaned = 0.0037325 Jy ! Component: 150 - total flux cleaned = 0.004545 Jy ! Component: 200 - total flux cleaned = 0.00477496 Jy ! Total flux subtracted in 200 components = 0.00477496 Jy ! Clean residual min=-0.001240 max=0.001331 Jy/beam ! Clean residual mean=-0.000003 rms=0.000263 Jy/beam ! Combined flux in latest and established models = 0.0543771 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 24 components and 0.0543771 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054087Jy sigma=0.463220 ! Fit after self-cal, rms=0.054068Jy sigma=0.462942 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8947 x 1.222 at -80.56 degrees (North through East) ! Clean map min=-0.0011841 max=0.043395 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.06 KP 0.96 MK 1.05 ! NL 1.20 OV 0.91 PT 0.93 SC 0.88 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 0.98 HN 1.07 KP 1.05 ! MK 1.03 NL 1.22 OV 0.89 SC 0.96 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.08 FD 1.06 KP 1.07 LA 1.09 ! MK 1.07 NL 0.77 OV 1.15 PT 1.01 ! SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.03 KP 1.03 MK 1.03 ! NL 1.20 OV 0.96 PT 0.89 SC 0.89 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 FD 1.04 HN 1.01 KP 1.05 ! MK 1.06 NL 1.24 OV 0.90 SC 0.87 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.03 FD 1.07 KP 1.09 LA 1.07 ! MK 0.98 NL 0.74 OV 1.04 PT 1.03 ! SC 0.92 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.04 KP 1.03 MK 1.06 ! NL 1.08 OV 0.95 PT 0.86 SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 0.98 HN 1.02 KP 1.03 ! MK 1.11 NL 1.16 OV 0.91 SC 0.93 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 FD 1.14 KP 1.06 LA 1.10 ! MK 1.11 NL 0.85 OV 0.99 PT 1.03 ! SC 0.89 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.98 KP 1.00 MK 1.11 ! NL 1.12 OV 0.98 PT 0.93 SC 0.90 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 1.01 HN 1.04 KP 1.00 ! MK 1.01 NL 1.23 OV 0.91 SC 0.98 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 FD 1.06 KP 1.02 LA 1.12 ! MK 1.10 NL 0.81 OV 1.09 PT 1.07 ! SC 0.92 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.92 KP 0.94 MK 1.06 ! NL 1.23 OV 0.93 PT 0.96 SC 0.89 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.96 FD 1.05 HN 0.96 KP 1.02 ! MK 1.05 NL 1.22 OV 0.92 SC 0.94 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 1.10 KP 1.05 LA 1.12 ! MK 1.00 NL 0.67 OV 1.03 PT 0.98 ! SC 0.95 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.01 KP 0.92 MK 1.06 ! NL 1.10 OV 0.92 PT 0.89 SC 0.92 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 1.01 HN 0.98 KP 1.01 ! MK 1.08 NL 1.26 OV 0.90 SC 0.92 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.11 FD 1.07 KP 1.10 LA 1.07 ! MK 1.03 NL 0.72 OV 1.16 PT 1.05 ! SC 0.91 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.99 KP 1.00 MK 0.97 ! NL 1.28 OV 0.89 PT 0.91 SC 0.85 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 1.04 HN 0.94 KP 1.02 ! MK 1.02 NL 1.24 OV 0.93 SC 0.90 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 1.07 KP 1.08 LA 1.12 ! MK 1.04 NL 0.75 OV 1.07 PT 1.03 ! SC 0.89 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.05 KP 0.99 MK 0.98 ! NL 1.07 OV 0.94 PT 0.83 SC 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.96 FD 1.01 HN 1.00 KP 1.05 ! MK 1.02 NL 1.17 OV 0.87 SC 0.93 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.01 FD 1.02 KP 1.16 LA 1.06 ! MK 1.08 NL 0.74 OV 1.06 PT 1.02 ! SC 0.88 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.97 KP 0.97 MK 1.04 ! NL 1.16 OV 0.94 PT 0.87 SC 0.95 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.00 HN 1.00 KP 1.06 ! MK 1.02 NL 1.26 OV 0.85 SC 0.95 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 1.10 KP 1.15 LA 1.03 ! MK 1.01 NL 0.70 OV 1.08 PT 1.12 ! SC 0.86 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.07 KP 0.95 MK 1.06 ! NL 1.12 OV 0.90 PT 0.96 SC 0.84 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 FD 1.08 HN 0.93 KP 1.02 ! MK 1.04 NL 1.14 OV 0.88 SC 0.92 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.95 FD 1.02 KP 1.14 LA 1.11 ! MK 0.93 NL 0.74 OV 1.15 PT 1.00 ! SC 0.88 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00 KP 0.96 MK 1.05 ! NL 1.17 OV 0.93 PT 0.91 SC 0.86 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.93 FD 1.02 HN 1.03 KP 1.01 ! MK 1.01 NL 1.15 OV 0.90 SC 0.93 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.10 FD 1.00 KP 1.13 LA 1.16 ! MK 1.07 NL 0.70 OV 1.13 PT 1.08 ! SC 0.83 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.83 FD 1.05 KP 0.89 MK 0.91 ! NL 1.15 OV 0.93 PT 0.95 SC 0.88 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.91 FD 1.05 HN 0.98 KP 1.00 ! MK 0.97 NL 1.17 OV 0.92 SC 0.81 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.93 FD 1.07 KP 1.03 LA 1.06 ! MK 0.93 NL 0.72 OV 1.07 PT 1.00 ! SC 0.86 ! ! ! Fit before self-cal, rms=0.054068Jy sigma=0.462942 ! Fit after self-cal, rms=0.051567Jy sigma=0.458976 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8864 mas, bmaj=1.215 mas, bpa=-81.65 degrees ! Estimated noise=0.262922 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000945377 Jy ! Component: 100 - total flux cleaned = 0.0012737 Jy ! Component: 150 - total flux cleaned = 0.00134686 Jy ! Component: 200 - total flux cleaned = 0.00141196 Jy ! Total flux subtracted in 200 components = 0.00141196 Jy ! Clean residual min=-0.000654 max=0.000765 Jy/beam ! Clean residual mean=-0.000000 rms=0.000150 Jy/beam ! Combined flux in latest and established models = 0.0557891 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 30 components and 0.0557891 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051548Jy sigma=0.458844 ! Fit after self-cal, rms=0.051766Jy sigma=0.457944 ! Inverting map ! Added new window around map position (0.4, 2.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00045625 Jy ! Component: 100 - total flux cleaned = 0.000473936 Jy ! Component: 150 - total flux cleaned = 0.000462533 Jy ! Component: 200 - total flux cleaned = 0.000438747 Jy ! Total flux subtracted in 200 components = 0.000438747 Jy ! Clean residual min=-0.000676 max=0.000752 Jy/beam ! Clean residual mean=-0.000001 rms=0.000155 Jy/beam ! Combined flux in latest and established models = 0.0562278 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 46 components and 0.0562278 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051755Jy sigma=0.457828 ! Fit after self-cal, rms=0.051764Jy sigma=0.457777 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051764Jy sigma=0.457777 ! Fit after self-cal, rms=0.052148Jy sigma=0.456540 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8841 mas, bmaj=1.214 mas, bpa=-81.66 degrees ! Estimated noise=0.262384 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000528853 Jy ! Component: 100 - total flux cleaned = 0.000719068 Jy ! Component: 150 - total flux cleaned = 0.000840174 Jy ! Component: 200 - total flux cleaned = 0.000934661 Jy ! Total flux subtracted in 200 components = 0.000934661 Jy ! Clean residual min=-0.000536 max=0.000564 Jy/beam ! Clean residual mean=-0.000000 rms=0.000121 Jy/beam ! Combined flux in latest and established models = 0.0571625 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 59 components and 0.0571625 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052139Jy sigma=0.456468 ! Fit after self-cal, rms=0.052311Jy sigma=0.456205 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (28.6, -24.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00027602 Jy ! Component: 100 - total flux cleaned = 0.000249556 Jy ! Component: 150 - total flux cleaned = 0.000283127 Jy ! Component: 200 - total flux cleaned = 0.000332631 Jy ! Total flux subtracted in 200 components = 0.000332631 Jy ! Clean residual min=-0.000538 max=0.000553 Jy/beam ! Clean residual mean=-0.000001 rms=0.000120 Jy/beam ! Combined flux in latest and established models = 0.0574951 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 70 components and 0.0574951 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052304Jy sigma=0.456145 ! Fit after self-cal, rms=0.052306Jy sigma=0.456135 ! Inverting map ! Added new window around map position (-25, 31.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000419697 Jy ! Component: 100 - total flux cleaned = 0.000469935 Jy ! Component: 150 - total flux cleaned = 0.00053253 Jy ! Component: 200 - total flux cleaned = 0.000561093 Jy ! Total flux subtracted in 200 components = 0.000561093 Jy ! Clean residual min=-0.000592 max=0.000522 Jy/beam ! Clean residual mean=-0.000001 rms=0.000118 Jy/beam ! Combined flux in latest and established models = 0.0580562 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 80 components and 0.0580562 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052299Jy sigma=0.456080 ! Fit after self-cal, rms=0.052301Jy sigma=0.456070 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052301Jy sigma=0.456070 ! Fit after self-cal, rms=0.052819Jy sigma=0.455989 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8816 mas, bmaj=1.213 mas, bpa=-81.38 degrees ! Estimated noise=0.262533 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000395747 Jy ! Component: 100 - total flux cleaned = 0.000664337 Jy ! Component: 150 - total flux cleaned = 0.000832526 Jy ! Component: 200 - total flux cleaned = 0.000934683 Jy ! Total flux subtracted in 200 components = 0.000934683 Jy ! Clean residual min=-0.000534 max=0.000546 Jy/beam ! Clean residual mean=0.000000 rms=0.000118 Jy/beam ! Combined flux in latest and established models = 0.0589909 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 83 components and 0.0589909 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052814Jy sigma=0.455945 ! Fit after self-cal, rms=0.052914Jy sigma=0.455895 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.95597e-05 Jy ! Component: 100 - total flux cleaned = 0.000127532 Jy ! Component: 150 - total flux cleaned = 0.000172039 Jy ! Component: 200 - total flux cleaned = 0.000214218 Jy ! Total flux subtracted in 200 components = 0.000214218 Jy ! Clean residual min=-0.000539 max=0.000525 Jy/beam ! Clean residual mean=-0.000000 rms=0.000117 Jy/beam ! Combined flux in latest and established models = 0.0592051 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 85 components and 0.0592051 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052911Jy sigma=0.455873 ! Fit after self-cal, rms=0.052913Jy sigma=0.455870 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052913Jy sigma=0.455870 ! Fit after self-cal, rms=0.053277Jy sigma=0.455846 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.143 mas, bmaj=2.622 mas, bpa=-81.49 degrees ! Estimated noise=0.352701 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000484382 Jy ! Component: 100 - total flux cleaned = 0.000811919 Jy ! Component: 150 - total flux cleaned = 0.00106439 Jy ! Component: 200 - total flux cleaned = 0.00126935 Jy ! Total flux subtracted in 200 components = 0.00126935 Jy ! Clean residual min=-0.000567 max=0.000662 Jy/beam ! Clean residual mean=-0.000000 rms=0.000154 Jy/beam ! Combined flux in latest and established models = 0.0604745 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 98 components and 0.0604745 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053275Jy sigma=0.455839 ! Fit after self-cal, rms=0.053326Jy sigma=0.455808 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000204746 Jy ! Component: 100 - total flux cleaned = 0.000366546 Jy ! Component: 150 - total flux cleaned = 0.000485612 Jy ! Component: 200 - total flux cleaned = 0.000551032 Jy ! Total flux subtracted in 200 components = 0.000551032 Jy ! Clean residual min=-0.000537 max=0.000627 Jy/beam ! Clean residual mean=-0.000000 rms=0.000151 Jy/beam ! Combined flux in latest and established models = 0.0610255 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 107 components and 0.0610255 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053325Jy sigma=0.455813 ! Fit after self-cal, rms=0.053326Jy sigma=0.455810 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8792 mas, bmaj=1.213 mas, bpa=-81.19 degrees ! Estimated noise=0.262807 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8792 x 1.213 at -81.19 degrees (North through East) ! Clean map min=-0.00062517 max=0.042829 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6467 mas, bmaj=0.8917 mas, bpa=-83.28 degrees ! Estimated noise=0.674858 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0307305 Jy ! Component: 100 - total flux cleaned = 0.0390501 Jy ! Component: 150 - total flux cleaned = 0.0437951 Jy ! Component: 200 - total flux cleaned = 0.046943 Jy ! Total flux subtracted in 200 components = 0.046943 Jy ! Clean residual min=-0.001734 max=0.001824 Jy/beam ! Clean residual mean=0.000001 rms=0.000359 Jy/beam ! Combined flux in latest and established models = 0.046943 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.046943 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8792 mas, bmaj=1.213 mas, bpa=-81.19 degrees ! Estimated noise=0.262807 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0039689 Jy ! Component: 100 - total flux cleaned = 0.00637147 Jy ! Component: 150 - total flux cleaned = 0.00797373 Jy ! Component: 200 - total flux cleaned = 0.00914082 Jy ! Total flux subtracted in 200 components = 0.00914082 Jy ! Clean residual min=-0.000698 max=0.000733 Jy/beam ! Clean residual mean=0.000000 rms=0.000142 Jy/beam ! Combined flux in latest and established models = 0.0560838 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 33 components and 0.0560838 Jy ! Inverting map ! Added new window around map position (2.4, 2.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000945498 Jy ! Component: 100 - total flux cleaned = 0.00157602 Jy ! Component: 150 - total flux cleaned = 0.00206341 Jy ! Component: 200 - total flux cleaned = 0.00237537 Jy ! Total flux subtracted in 200 components = 0.00237537 Jy ! Clean residual min=-0.000612 max=0.000560 Jy/beam ! Clean residual mean=0.000000 rms=0.000126 Jy/beam ! Combined flux in latest and established models = 0.0584592 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 46 components and 0.0584592 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.143 mas, bmaj=2.622 mas, bpa=-81.49 degrees ! Estimated noise=0.352701 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000757211 Jy ! Component: 100 - total flux cleaned = 0.00128944 Jy ! Component: 150 - total flux cleaned = 0.00170181 Jy ! Component: 200 - total flux cleaned = 0.00200507 Jy ! Total flux subtracted in 200 components = 0.00200507 Jy ! Clean residual min=-0.000570 max=0.000622 Jy/beam ! Clean residual mean=-0.000000 rms=0.000152 Jy/beam ! Combined flux in latest and established models = 0.0604642 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000198775 Jy ! Component: 100 - total flux cleaned = 0.000371499 Jy ! Component: 150 - total flux cleaned = 0.000514838 Jy ! Component: 200 - total flux cleaned = 0.000612319 Jy ! Total flux subtracted in 200 components = 0.000612319 Jy ! Clean residual min=-0.000561 max=0.000619 Jy/beam ! Clean residual mean=-0.000000 rms=0.000149 Jy/beam ! Combined flux in latest and established models = 0.0610766 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 81 components and 0.0610766 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8792 mas, bmaj=1.213 mas, bpa=-81.19 degrees ! Estimated noise=0.262807 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000162919 Jy ! Component: 100 - total flux cleaned = -0.000148061 Jy ! Component: 150 - total flux cleaned = -0.000118989 Jy ! Component: 200 - total flux cleaned = -0.00010606 Jy ! Total flux subtracted in 200 components = -0.00010606 Jy ! Clean residual min=-0.000562 max=0.000545 Jy/beam ! Clean residual mean=-0.000000 rms=0.000117 Jy/beam ! Combined flux in latest and established models = 0.0609705 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 94 components and 0.0609705 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053327Jy sigma=0.455857 ! Fit after self-cal, rms=0.053326Jy sigma=0.455841 wmodel J1548+7845_X_a_map.mod ! Writing 94 model components to file: J1548+7845_X_a_map.mod wobs J1548+7845_X_a_uvs.fits ! Writing UV FITS file: J1548+7845_X_a_uvs.fits wwins J1548+7845_X_a_map.win ! wwins: Wrote 6 windows to J1548+7845_X_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 5.31392e-05 Jy ! Component: 100 - total flux cleaned = 0.000116563 Jy ! Component: 150 - total flux cleaned = 0.000134159 Jy ! Component: 200 - total flux cleaned = 0.000125735 Jy ! Component: 250 - total flux cleaned = 0.000101117 Jy ! Component: 300 - total flux cleaned = 6.89578e-05 Jy ! Component: 350 - total flux cleaned = 4.53063e-05 Jy ! Component: 400 - total flux cleaned = 2.98303e-05 Jy ! Component: 450 - total flux cleaned = -8.31987e-06 Jy ! Component: 500 - total flux cleaned = -4.58868e-05 Jy ! Component: 550 - total flux cleaned = -6.81523e-05 Jy ! Component: 600 - total flux cleaned = -8.28129e-05 Jy ! Component: 650 - total flux cleaned = -0.000104412 Jy ! Component: 700 - total flux cleaned = -9.00365e-05 Jy ! Component: 750 - total flux cleaned = -0.000104311 Jy ! Component: 800 - total flux cleaned = -0.000111311 Jy ! Component: 850 - total flux cleaned = -0.000111379 Jy ! Component: 900 - total flux cleaned = -0.000139085 Jy ! Component: 950 - total flux cleaned = -0.000139184 Jy ! Component: 1000 - total flux cleaned = -0.000152761 Jy ! Component: 1050 - total flux cleaned = -0.000159579 Jy ! Component: 1100 - total flux cleaned = -0.000173027 Jy ! Component: 1150 - total flux cleaned = -0.000166386 Jy ! Component: 1200 - total flux cleaned = -0.000199382 Jy ! Component: 1250 - total flux cleaned = -0.000192801 Jy ! Component: 1300 - total flux cleaned = -0.000218847 Jy ! Component: 1350 - total flux cleaned = -0.00021234 Jy ! Component: 1400 - total flux cleaned = -0.000231644 Jy ! Component: 1450 - total flux cleaned = -0.000237966 Jy ! Component: 1500 - total flux cleaned = -0.000237946 Jy ! Component: 1550 - total flux cleaned = -0.000237909 Jy ! Component: 1600 - total flux cleaned = -0.000231621 Jy ! Component: 1650 - total flux cleaned = -0.000231586 Jy ! Component: 1700 - total flux cleaned = -0.000237789 Jy ! Component: 1750 - total flux cleaned = -0.000231611 Jy ! Component: 1800 - total flux cleaned = -0.000213252 Jy ! Component: 1850 - total flux cleaned = -0.0002559 Jy ! Component: 1900 - total flux cleaned = -0.000225555 Jy ! Component: 1950 - total flux cleaned = -0.000225517 Jy ! Component: 2000 - total flux cleaned = -0.000219457 Jy ! Component: 2050 - total flux cleaned = -0.000201592 Jy ! Component: 2100 - total flux cleaned = -0.000225364 Jy ! Component: 2150 - total flux cleaned = -0.000225313 Jy ! Component: 2200 - total flux cleaned = -0.000219377 Jy ! Component: 2250 - total flux cleaned = -0.000219321 Jy ! Component: 2300 - total flux cleaned = -0.000201815 Jy ! Component: 2350 - total flux cleaned = -0.000213422 Jy ! Component: 2400 - total flux cleaned = -0.000224939 Jy ! Component: 2450 - total flux cleaned = -0.000230721 Jy ! Component: 2500 - total flux cleaned = -0.000236395 Jy ! Component: 2550 - total flux cleaned = -0.000264829 Jy ! Component: 2600 - total flux cleaned = -0.000259172 Jy ! Component: 2650 - total flux cleaned = -0.000264797 Jy ! Component: 2700 - total flux cleaned = -0.000281662 Jy ! Component: 2750 - total flux cleaned = -0.000287257 Jy ! Component: 2800 - total flux cleaned = -0.000281673 Jy ! Component: 2850 - total flux cleaned = -0.000309367 Jy ! Component: 2900 - total flux cleaned = -0.000331449 Jy ! Component: 2950 - total flux cleaned = -0.000276492 Jy ! Component: 3000 - total flux cleaned = -0.000298398 Jy ! Component: 3050 - total flux cleaned = -0.000309305 Jy ! Component: 3100 - total flux cleaned = -0.00033102 Jy ! Component: 3150 - total flux cleaned = -0.00029309 Jy ! Component: 3200 - total flux cleaned = -0.000309224 Jy ! Component: 3250 - total flux cleaned = -0.00031459 Jy ! Component: 3300 - total flux cleaned = -0.000309252 Jy ! Component: 3350 - total flux cleaned = -0.000303924 Jy ! Component: 3400 - total flux cleaned = -0.000314546 Jy ! Component: 3450 - total flux cleaned = -0.000314559 Jy ! Component: 3500 - total flux cleaned = -0.000282907 Jy ! Component: 3550 - total flux cleaned = -0.000293415 Jy ! Component: 3600 - total flux cleaned = -0.000277715 Jy ! Component: 3650 - total flux cleaned = -0.000282895 Jy ! Component: 3700 - total flux cleaned = -0.000282883 Jy ! Component: 3750 - total flux cleaned = -0.000267322 Jy ! Component: 3800 - total flux cleaned = -0.000262139 Jy ! Component: 3850 - total flux cleaned = -0.000262136 Jy ! Component: 3900 - total flux cleaned = -0.000272401 Jy ! Component: 3950 - total flux cleaned = -0.000262166 Jy ! Component: 4000 - total flux cleaned = -0.000241783 Jy ! Component: 4050 - total flux cleaned = -0.000241749 Jy ! Total flux subtracted in 4096 components = -0.000236711 Jy ! Clean residual min=-0.000278 max=0.000292 Jy/beam ! Clean residual mean=-0.000000 rms=0.000085 Jy/beam ! Combined flux in latest and established models = 0.0607338 Jy keep ! Adding 338 model components to the UV plane model. ! The established model now contains 432 components and 0.0607338 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uvm//J1548+7845_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8792 x 1.213 at -81.19 degrees (North through East) ! Clean map min=-0.00049626 max=0.042678 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uvm//J1548+7845_X_a_map.fits wmodel /image_prod/ug002_uvm//J1548+7845_X_a_map.mod ! Writing 432 model components to file: /image_prod/ug002_uvm//J1548+7845_X_a_map.mod wobs /image_prod/ug002_uvm//J1548+7845_X_a_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uvm//J1548+7845_X_a_uvs.fits wwins /image_prod/ug002_uvm//J1548+7845_X_a_map.win ! wwins: Wrote 7 windows to /image_prod/ug002_uvm//J1548+7845_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0426776 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 8.51209e-05 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.598352 0.598352 1.1967 2.39341 4.78682 9.57364 19.1473 38.2946 76.5891 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0002 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.042 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 501.376 quit ! Quitting program ! Log file /image_prod/ug002_uvm//J1548+7845_X_a_dfm.log closed on Wed Mar 4 17:24:22 2020