! Started logfile: /image_prod/ug002_uvm//J1522-2730_X_b_dfm.log on Wed Mar 4 17:23:19 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uvm//J1522-2730_X_b_uvm.fits ! Reading UV FITS file: /image_prod/ug002_uvm//J1522-2730_X_b_uvm.fits ! AN table 1: 24 integrations on 36 of 36 possible baselines. ! AN table 2: 8 integrations on 21 of 21 possible baselines. ! AN table 3: 40 integrations on 45 of 45 possible baselines. ! AN table 4: 18 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.72482 visibilities/baseline/integration-bin. ! Found source: J1522-2730 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 121 lines of history. ! ! Reading 29016 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1522-2730_X_b] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 41 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 71 telescope corrections were flagged in sub-array 3. ! A total of 20 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 2. ! A total of 41 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 71 telescope corrections were flagged in sub-array 3. ! A total of 20 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 3. ! A total of 41 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 71 telescope corrections were flagged in sub-array 3. ! A total of 20 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 4. ! A total of 41 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 71 telescope corrections were flagged in sub-array 3. ! A total of 20 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 5. ! A total of 41 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 71 telescope corrections were flagged in sub-array 3. ! A total of 20 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 6. ! A total of 41 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 71 telescope corrections were flagged in sub-array 3. ! A total of 20 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 7. ! A total of 41 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 71 telescope corrections were flagged in sub-array 3. ! A total of 20 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 8. ! A total of 41 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 71 telescope corrections were flagged in sub-array 3. ! A total of 20 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 9. ! A total of 41 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 71 telescope corrections were flagged in sub-array 3. ! A total of 20 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 10. ! A total of 41 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 71 telescope corrections were flagged in sub-array 3. ! A total of 20 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 11. ! A total of 41 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 71 telescope corrections were flagged in sub-array 3. ! A total of 20 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 12. ! A total of 41 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 71 telescope corrections were flagged in sub-array 3. ! A total of 20 telescope corrections were flagged in sub-array 4. ! ! Fit before self-cal, rms=1.116954Jy sigma=8.020279 ! Fit after self-cal, rms=0.546591Jy sigma=3.925392 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6021 mas, bmaj=1.587 mas, bpa=-1.527 degrees ! Estimated noise=0.9966 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.34727 Jy ! Component: 100 - total flux cleaned = 0.425146 Jy ! Total flux subtracted in 100 components = 0.425146 Jy ! Clean residual min=-0.012832 max=0.031985 Jy/beam ! Clean residual mean=0.000008 rms=0.002687 Jy/beam ! Combined flux in latest and established models = 0.425146 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.425146 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.134898Jy sigma=0.907610 ! Fit after self-cal, rms=0.134883Jy sigma=0.907432 ! Inverting map ! Added new window around map position (0.8, 1.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0340452 Jy ! Component: 100 - total flux cleaned = 0.0544497 Jy ! Total flux subtracted in 100 components = 0.0544497 Jy ! Clean residual min=-0.014164 max=0.026482 Jy/beam ! Clean residual mean=0.000011 rms=0.002305 Jy/beam ! Combined flux in latest and established models = 0.479596 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 14 components and 0.479596 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.120039Jy sigma=0.792400 ! Fit after self-cal, rms=0.119757Jy sigma=0.789742 ! Inverting map ! Added new window around map position (-1.4, -0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.024318 Jy ! Component: 100 - total flux cleaned = 0.0394011 Jy ! Total flux subtracted in 100 components = 0.0394011 Jy ! Clean residual min=-0.011278 max=0.014343 Jy/beam ! Clean residual mean=0.000015 rms=0.002072 Jy/beam ! Combined flux in latest and established models = 0.518997 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 23 components and 0.518997 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.111810Jy sigma=0.731050 ! Fit after self-cal, rms=0.111375Jy sigma=0.728186 ! Inverting map ! Added new window around map position (-0.8, 0.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0141819 Jy ! Component: 100 - total flux cleaned = 0.0240366 Jy ! Total flux subtracted in 100 components = 0.0240366 Jy ! Clean residual min=-0.010803 max=0.011969 Jy/beam ! Clean residual mean=0.000016 rms=0.001965 Jy/beam ! Combined flux in latest and established models = 0.543033 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 36 components and 0.543033 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.108579Jy sigma=0.708135 ! Fit after self-cal, rms=0.108467Jy sigma=0.707269 ! Inverting map ! Added new window around map position (-2, -7.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0114234 Jy ! Component: 100 - total flux cleaned = 0.0171537 Jy ! Total flux subtracted in 100 components = 0.0171537 Jy ! Clean residual min=-0.010400 max=0.010394 Jy/beam ! Clean residual mean=0.000018 rms=0.001899 Jy/beam ! Combined flux in latest and established models = 0.560187 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 49 components and 0.560187 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.107323Jy sigma=0.698140 ! Fit after self-cal, rms=0.107250Jy sigma=0.697405 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8079 mas, bmaj=2.051 mas, bpa=-0.8133 degrees ! Estimated noise=0.603576 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00858545 Jy ! Component: 100 - total flux cleaned = 0.0139498 Jy ! Component: 150 - total flux cleaned = 0.0159722 Jy ! Component: 200 - total flux cleaned = 0.0170941 Jy ! Total flux subtracted in 200 components = 0.0170941 Jy ! Clean residual min=-0.010930 max=0.010662 Jy/beam ! Clean residual mean=0.000022 rms=0.002349 Jy/beam ! Combined flux in latest and established models = 0.577281 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 68 components and 0.577281 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.106325Jy sigma=0.690932 ! Fit after self-cal, rms=0.106297Jy sigma=0.690695 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8079 x 2.051 at -0.8133 degrees (North through East) ! Clean map min=-0.010374 max=0.44624 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.96 HN 1.36 KP 0.98 ! MK 1.09 NL 1.08 OV 0.88 PT 0.96 ! SC 1.00 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 0.96 HN 1.32 KP 1.04 ! NL 1.04 OV 0.89 SC 1.11 ! ! A total of 21 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.93 FD 0.93 HN 1.10 KP 0.98 ! LA 1.07 MK 0.96 NL 0.99 OV 0.93 ! PT 0.94 SC 0.94 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.14 FD 1.10 KP 1.05 LA 1.12 ! MK 1.00 NL 0.98 PT 1.10 SC 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.97 HN 1.30 KP 0.96 ! MK 1.10 NL 1.13 OV 0.88 PT 0.96 ! SC 0.98 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 0.99 HN 1.41 KP 0.98 ! NL 1.08 OV 0.92 SC 1.11 ! ! A total of 21 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.94 FD 0.92 HN 1.08 KP 0.97 ! LA 1.06 MK 0.98 NL 0.99 OV 0.92 ! PT 0.95 SC 0.94 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.16 FD 1.12 KP 1.08 LA 1.13 ! MK 1.02 NL 0.99 PT 1.12 SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.99 HN 1.26 KP 0.96 ! MK 1.11 NL 1.06 OV 0.88 PT 0.93 ! SC 1.00 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 0.98 HN 1.33 KP 1.05 ! NL 1.03 OV 0.91 SC 1.08 ! ! A total of 21 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.93 FD 0.92 HN 1.09 KP 0.97 ! LA 1.08 MK 0.96 NL 0.99 OV 0.95 ! PT 0.95 SC 0.95 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.12 FD 1.15 KP 1.07 LA 1.13 ! MK 1.04 NL 0.98 PT 1.10 SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.98 HN 1.27 KP 0.94 ! MK 1.10 NL 1.06 OV 0.91 PT 0.95 ! SC 1.00 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 0.98 HN 1.39 KP 1.03 ! NL 1.01 OV 0.93 SC 1.10 ! ! A total of 21 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.94 FD 0.93 HN 1.07 KP 0.98 ! LA 1.05 MK 0.97 NL 1.00 OV 0.93 ! PT 0.95 SC 0.93 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.12 FD 1.08 KP 1.09 LA 1.14 ! MK 1.05 NL 1.00 PT 1.09 SC 0.98 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.98 HN 1.28 KP 0.95 ! MK 1.08 NL 1.10 OV 0.91 PT 0.98 ! SC 1.03 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 0.99 HN 1.29 KP 1.02 ! NL 1.00 OV 0.95 SC 1.10 ! ! A total of 21 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.94 FD 0.92 HN 1.08 KP 0.99 ! LA 1.06 MK 0.95 NL 0.98 OV 0.94 ! PT 0.94 SC 0.94 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.06 FD 1.11 KP 1.09 LA 1.14 ! MK 1.02 NL 0.94 PT 1.19 SC 1.07 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.01 HN 1.36 KP 0.97 ! MK 1.10 NL 1.09 OV 0.90 PT 0.92 ! SC 1.02 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.06 FD 1.00 HN 1.31 KP 1.04 ! NL 1.04 OV 0.93 SC 1.07 ! ! A total of 21 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.93 FD 0.93 HN 1.12 KP 0.99 ! LA 1.08 MK 0.96 NL 0.99 OV 0.94 ! PT 0.95 SC 0.94 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.92 FD 1.14 KP 1.07 LA 1.13 ! MK 1.03 NL 0.96 PT 1.12 SC 0.96 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.96 HN 1.28 KP 0.96 ! MK 1.10 NL 1.08 OV 0.92 PT 0.96 ! SC 1.00 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 0.98 HN 1.28 KP 1.04 ! NL 1.01 OV 0.94 SC 1.13 ! ! A total of 21 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.92 FD 0.93 HN 1.06 KP 0.98 ! LA 1.06 MK 0.98 NL 0.98 OV 0.95 ! PT 0.96 SC 0.96 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.13 FD 1.11 KP 1.07 LA 1.13 ! MK 1.04 NL 0.96 PT 1.14 SC 0.95 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.98 HN 1.34 KP 0.95 ! MK 1.09 NL 1.08 OV 0.90 PT 0.90 ! SC 1.05 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 0.98 HN 1.27 KP 1.03 ! NL 1.03 OV 0.94 SC 1.08 ! ! A total of 21 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.94 FD 0.93 HN 1.11 KP 0.99 ! LA 1.06 MK 0.96 NL 0.98 OV 0.95 ! PT 0.95 SC 0.95 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.27 FD 1.10 KP 1.06 LA 1.14 ! MK 1.07 NL 1.03 PT 1.15 SC 0.99 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.99 HN 1.34 KP 0.96 ! MK 1.13 NL 1.09 OV 0.91 PT 0.92 ! SC 1.03 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.04 FD 0.99 HN 1.29 KP 1.03 ! NL 1.04 OV 0.90 SC 1.13 ! ! A total of 21 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.95 FD 0.92 HN 1.09 KP 0.98 ! LA 1.06 MK 0.99 NL 1.00 OV 0.94 ! PT 0.95 SC 0.96 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.06 FD 1.12 KP 1.07 LA 1.12 ! MK 1.05 NL 1.00 PT 1.16 SC 0.98 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.03 HN 1.35 KP 0.96 ! MK 1.14 NL 1.07 OV 0.89 PT 1.01 ! SC 1.00 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 0.95 HN 1.26 KP 1.02 ! NL 1.06 OV 0.94 SC 1.11 ! ! A total of 21 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.94 FD 0.93 HN 1.07 KP 0.98 ! LA 1.07 MK 0.97 NL 1.03 OV 0.95 ! PT 0.96 SC 0.96 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.10 FD 1.10 KP 1.07 LA 1.11 ! MK 1.06 NL 0.96 PT 1.14 SC 0.96 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.99 HN 1.44 KP 0.97 ! MK 1.11 NL 1.16 OV 0.90 PT 0.93 ! SC 1.01 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.05 FD 0.98 HN 1.29 KP 1.04 ! NL 0.99 OV 0.96 SC 1.16 ! ! A total of 21 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.95 FD 0.91 HN 1.12 KP 0.98 ! LA 1.08 MK 0.98 NL 0.98 OV 0.95 ! PT 0.96 SC 0.95 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.15 FD 1.12 KP 1.08 LA 1.09 ! MK 1.02 NL 0.97 PT 1.15 SC 0.98 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.03 HN 1.33 KP 0.94 ! MK 1.17 NL 1.11 OV 0.89 PT 0.98 ! SC 1.02 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 0.95 HN 1.35 KP 1.00 ! NL 1.01 OV 0.94 SC 1.10 ! ! A total of 21 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.94 FD 0.92 HN 1.11 KP 0.98 ! LA 1.07 MK 0.98 NL 0.97 OV 0.96 ! PT 0.97 SC 0.96 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.08 FD 1.15 KP 1.08 LA 1.11 ! MK 1.02 NL 1.00 PT 1.11 SC 1.03 ! ! ! Fit before self-cal, rms=0.106297Jy sigma=0.690695 ! Fit after self-cal, rms=0.093966Jy sigma=0.567588 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8086 mas, bmaj=2.058 mas, bpa=0.02203 degrees ! Estimated noise=0.610733 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00344314 Jy ! Component: 100 - total flux cleaned = -0.00477992 Jy ! Component: 150 - total flux cleaned = -0.00557025 Jy ! Component: 200 - total flux cleaned = -0.00623601 Jy ! Total flux subtracted in 200 components = -0.00623601 Jy ! Clean residual min=-0.006040 max=0.006894 Jy/beam ! Clean residual mean=-0.000008 rms=0.001438 Jy/beam ! Combined flux in latest and established models = 0.571045 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 82 components and 0.571045 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.093158Jy sigma=0.562922 ! Fit after self-cal, rms=0.093203Jy sigma=0.562569 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.093203Jy sigma=0.562569 ! Fit after self-cal, rms=0.082502Jy sigma=0.480107 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8083 mas, bmaj=2.068 mas, bpa=-0.2108 degrees ! Estimated noise=0.612557 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00433352 Jy ! Component: 100 - total flux cleaned = -0.00526571 Jy ! Component: 150 - total flux cleaned = -0.00564456 Jy ! Component: 200 - total flux cleaned = -0.00572778 Jy ! Total flux subtracted in 200 components = -0.00572778 Jy ! Clean residual min=-0.003743 max=0.003855 Jy/beam ! Clean residual mean=0.000005 rms=0.000627 Jy/beam ! Combined flux in latest and established models = 0.565317 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 94 components and 0.565318 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082117Jy sigma=0.477626 ! Fit after self-cal, rms=0.082134Jy sigma=0.477450 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2.4, -0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00134524 Jy ! Component: 100 - total flux cleaned = 0.000981151 Jy ! Component: 150 - total flux cleaned = 0.00073417 Jy ! Component: 200 - total flux cleaned = 0.000586762 Jy ! Total flux subtracted in 200 components = 0.000586762 Jy ! Clean residual min=-0.003514 max=0.002684 Jy/beam ! Clean residual mean=0.000006 rms=0.000601 Jy/beam ! Combined flux in latest and established models = 0.565904 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 107 components and 0.565904 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081904Jy sigma=0.475530 ! Fit after self-cal, rms=0.081900Jy sigma=0.475452 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081900Jy sigma=0.475452 ! Fit after self-cal, rms=0.082268Jy sigma=0.470561 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8079 mas, bmaj=2.069 mas, bpa=-0.2293 degrees ! Estimated noise=0.611868 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0028484 Jy ! Component: 100 - total flux cleaned = -0.00333253 Jy ! Component: 150 - total flux cleaned = -0.00354845 Jy ! Component: 200 - total flux cleaned = -0.00367733 Jy ! Total flux subtracted in 200 components = -0.00367733 Jy ! Clean residual min=-0.003063 max=0.002227 Jy/beam ! Clean residual mean=-0.000001 rms=0.000485 Jy/beam ! Combined flux in latest and established models = 0.562227 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 111 components and 0.562227 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082081Jy sigma=0.469432 ! Fit after self-cal, rms=0.082084Jy sigma=0.469395 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000264664 Jy ! Component: 100 - total flux cleaned = -0.000325964 Jy ! Component: 150 - total flux cleaned = -0.000381943 Jy ! Component: 200 - total flux cleaned = -0.000434348 Jy ! Total flux subtracted in 200 components = -0.000434348 Jy ! Clean residual min=-0.002963 max=0.002197 Jy/beam ! Clean residual mean=-0.000001 rms=0.000476 Jy/beam ! Combined flux in latest and established models = 0.561792 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 116 components and 0.561793 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082002Jy sigma=0.468862 ! Fit after self-cal, rms=0.081995Jy sigma=0.468841 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081995Jy sigma=0.468841 ! Fit after self-cal, rms=0.082161Jy sigma=0.468532 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.195 mas, bmaj=5.041 mas, bpa=1.515 degrees ! Estimated noise=0.806836 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00193262 Jy ! Component: 100 - total flux cleaned = -0.00274933 Jy ! Component: 150 - total flux cleaned = -0.00286042 Jy ! Component: 200 - total flux cleaned = -0.00292642 Jy ! Total flux subtracted in 200 components = -0.00292642 Jy ! Clean residual min=-0.003007 max=0.002345 Jy/beam ! Clean residual mean=-0.000002 rms=0.000607 Jy/beam ! Combined flux in latest and established models = 0.558866 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 128 components and 0.558866 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082093Jy sigma=0.468280 ! Fit after self-cal, rms=0.082082Jy sigma=0.468232 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000331783 Jy ! Component: 100 - total flux cleaned = -0.000391253 Jy ! Component: 150 - total flux cleaned = -0.000476379 Jy ! Component: 200 - total flux cleaned = -0.000530504 Jy ! Total flux subtracted in 200 components = -0.000530504 Jy ! Clean residual min=-0.002804 max=0.002336 Jy/beam ! Clean residual mean=-0.000003 rms=0.000595 Jy/beam ! Combined flux in latest and established models = 0.558336 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 130 components and 0.558336 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082059Jy sigma=0.468177 ! Fit after self-cal, rms=0.082054Jy sigma=0.468161 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8076 mas, bmaj=2.07 mas, bpa=-0.2312 degrees ! Estimated noise=0.611475 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8076 x 2.07 at -0.2312 degrees (North through East) ! Clean map min=-0.0026853 max=0.45406 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.601 mas, bmaj=1.598 mas, bpa=-0.866 degrees ! Estimated noise=1.00147 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.346835 Jy ! Component: 100 - total flux cleaned = 0.424373 Jy ! Component: 150 - total flux cleaned = 0.458581 Jy ! Component: 200 - total flux cleaned = 0.481482 Jy ! Total flux subtracted in 200 components = 0.481482 Jy ! Clean residual min=-0.005468 max=0.012661 Jy/beam ! Clean residual mean=-0.000005 rms=0.001078 Jy/beam ! Combined flux in latest and established models = 0.481482 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.481482 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8076 mas, bmaj=2.07 mas, bpa=-0.2312 degrees ! Estimated noise=0.611475 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0286987 Jy ! Component: 100 - total flux cleaned = 0.0446614 Jy ! Component: 150 - total flux cleaned = 0.0543 Jy ! Component: 200 - total flux cleaned = 0.0609143 Jy ! Total flux subtracted in 200 components = 0.0609143 Jy ! Clean residual min=-0.003141 max=0.004377 Jy/beam ! Clean residual mean=-0.000009 rms=0.000621 Jy/beam ! Combined flux in latest and established models = 0.542396 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 49 components and 0.542396 Jy ! Inverting map ! Added new window around map position (1.6, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00499759 Jy ! Component: 100 - total flux cleaned = 0.00865293 Jy ! Component: 150 - total flux cleaned = 0.0114161 Jy ! Component: 200 - total flux cleaned = 0.0127426 Jy ! Total flux subtracted in 200 components = 0.0127426 Jy ! Clean residual min=-0.002954 max=0.002400 Jy/beam ! Clean residual mean=-0.000003 rms=0.000460 Jy/beam ! Combined flux in latest and established models = 0.555139 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 75 components and 0.555139 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.195 mas, bmaj=5.041 mas, bpa=1.515 degrees ! Estimated noise=0.806836 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00242026 Jy ! Component: 100 - total flux cleaned = 0.00339903 Jy ! Component: 150 - total flux cleaned = 0.00356831 Jy ! Component: 200 - total flux cleaned = 0.00350922 Jy ! Total flux subtracted in 200 components = 0.00350922 Jy ! Clean residual min=-0.002699 max=0.002375 Jy/beam ! Clean residual mean=-0.000004 rms=0.000587 Jy/beam ! Combined flux in latest and established models = 0.558648 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.34275e-05 Jy ! Component: 100 - total flux cleaned = -7.74383e-05 Jy ! Component: 150 - total flux cleaned = -7.76843e-05 Jy ! Component: 200 - total flux cleaned = -0.000100357 Jy ! Total flux subtracted in 200 components = -0.000100357 Jy ! Clean residual min=-0.002654 max=0.002392 Jy/beam ! Clean residual mean=-0.000004 rms=0.000580 Jy/beam ! Combined flux in latest and established models = 0.558548 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 105 components and 0.558548 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8076 mas, bmaj=2.07 mas, bpa=-0.2312 degrees ! Estimated noise=0.611475 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000166935 Jy ! Component: 100 - total flux cleaned = -5.70799e-06 Jy ! Component: 150 - total flux cleaned = 0.000138096 Jy ! Component: 200 - total flux cleaned = 0.000226493 Jy ! Total flux subtracted in 200 components = 0.000226493 Jy ! Clean residual min=-0.002591 max=0.002265 Jy/beam ! Clean residual mean=-0.000001 rms=0.000428 Jy/beam ! Combined flux in latest and established models = 0.558774 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 121 components and 0.558774 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081909Jy sigma=0.467061 ! Fit after self-cal, rms=0.081848Jy sigma=0.466690 wmodel J1522-2730_X_b_map.mod ! Writing 121 model components to file: J1522-2730_X_b_map.mod wobs J1522-2730_X_b_uvs.fits ! Writing UV FITS file: J1522-2730_X_b_uvs.fits wwins J1522-2730_X_b_map.win ! wwins: Wrote 7 windows to J1522-2730_X_b_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000848768 Jy ! Component: 100 - total flux cleaned = -0.00123795 Jy ! Component: 150 - total flux cleaned = -0.00168101 Jy ! Component: 200 - total flux cleaned = -0.00196531 Jy ! Component: 250 - total flux cleaned = -0.00214801 Jy ! Component: 300 - total flux cleaned = -0.0022954 Jy ! Component: 350 - total flux cleaned = -0.00241038 Jy ! Component: 400 - total flux cleaned = -0.00255131 Jy ! Component: 450 - total flux cleaned = -0.00268916 Jy ! Component: 500 - total flux cleaned = -0.00282427 Jy ! Component: 550 - total flux cleaned = -0.00293061 Jy ! Component: 600 - total flux cleaned = -0.003035 Jy ! Component: 650 - total flux cleaned = -0.00316404 Jy ! Component: 700 - total flux cleaned = -0.0033166 Jy ! Component: 750 - total flux cleaned = -0.00344213 Jy ! Component: 800 - total flux cleaned = -0.00361553 Jy ! Component: 850 - total flux cleaned = -0.00371336 Jy ! Component: 900 - total flux cleaned = -0.00390692 Jy ! Component: 950 - total flux cleaned = -0.00397851 Jy ! Component: 1000 - total flux cleaned = -0.00416779 Jy ! Component: 1050 - total flux cleaned = -0.00435487 Jy ! Component: 1100 - total flux cleaned = -0.00447025 Jy ! Component: 1150 - total flux cleaned = -0.00458469 Jy ! Component: 1200 - total flux cleaned = -0.00467555 Jy ! Component: 1250 - total flux cleaned = -0.00476534 Jy ! Component: 1300 - total flux cleaned = -0.00494321 Jy ! Component: 1350 - total flux cleaned = -0.00500915 Jy ! Component: 1400 - total flux cleaned = -0.00507451 Jy ! Component: 1450 - total flux cleaned = -0.00503078 Jy ! Component: 1500 - total flux cleaned = -0.00513819 Jy ! Component: 1550 - total flux cleaned = -0.00509556 Jy ! Component: 1600 - total flux cleaned = -0.00518024 Jy ! Component: 1650 - total flux cleaned = -0.00509636 Jy ! Component: 1700 - total flux cleaned = -0.00520046 Jy ! Component: 1750 - total flux cleaned = -0.00522102 Jy ! Component: 1800 - total flux cleaned = -0.00517992 Jy ! Component: 1850 - total flux cleaned = -0.00530202 Jy ! Component: 1900 - total flux cleaned = -0.00522115 Jy ! Component: 1950 - total flux cleaned = -0.0051811 Jy ! Component: 2000 - total flux cleaned = -0.00520122 Jy ! Component: 2050 - total flux cleaned = -0.00524096 Jy ! Component: 2100 - total flux cleaned = -0.00530005 Jy ! Component: 2150 - total flux cleaned = -0.00533914 Jy ! Component: 2200 - total flux cleaned = -0.00531963 Jy ! Component: 2250 - total flux cleaned = -0.0052809 Jy ! Component: 2300 - total flux cleaned = -0.00531922 Jy ! Component: 2350 - total flux cleaned = -0.00543404 Jy ! Component: 2400 - total flux cleaned = -0.00535782 Jy ! Component: 2450 - total flux cleaned = -0.00535806 Jy ! Component: 2500 - total flux cleaned = -0.00548968 Jy ! Component: 2550 - total flux cleaned = -0.00552681 Jy ! Component: 2600 - total flux cleaned = -0.00558248 Jy ! Component: 2650 - total flux cleaned = -0.00560109 Jy ! Component: 2700 - total flux cleaned = -0.00561948 Jy ! Component: 2750 - total flux cleaned = -0.00578361 Jy ! Component: 2800 - total flux cleaned = -0.0057835 Jy ! Component: 2850 - total flux cleaned = -0.00583777 Jy ! Component: 2900 - total flux cleaned = -0.00592759 Jy ! Component: 2950 - total flux cleaned = -0.0059453 Jy ! Component: 3000 - total flux cleaned = -0.00592744 Jy ! Component: 3050 - total flux cleaned = -0.00601591 Jy ! Component: 3100 - total flux cleaned = -0.00615651 Jy ! Component: 3150 - total flux cleaned = -0.00608663 Jy ! Component: 3200 - total flux cleaned = -0.00613886 Jy ! Component: 3250 - total flux cleaned = -0.00617337 Jy ! Component: 3300 - total flux cleaned = -0.00624228 Jy ! Component: 3350 - total flux cleaned = -0.0061909 Jy ! Component: 3400 - total flux cleaned = -0.00622513 Jy ! Component: 3450 - total flux cleaned = -0.00637789 Jy ! Component: 3500 - total flux cleaned = -0.00647919 Jy ! Component: 3550 - total flux cleaned = -0.00644556 Jy ! Component: 3600 - total flux cleaned = -0.00647907 Jy ! Component: 3650 - total flux cleaned = -0.00651239 Jy ! Component: 3700 - total flux cleaned = -0.00656218 Jy ! Component: 3750 - total flux cleaned = -0.00662832 Jy ! Component: 3800 - total flux cleaned = -0.00666108 Jy ! Component: 3850 - total flux cleaned = -0.00669377 Jy ! Component: 3900 - total flux cleaned = -0.00671002 Jy ! Component: 3950 - total flux cleaned = -0.00680745 Jy ! Component: 4000 - total flux cleaned = -0.00685584 Jy ! Component: 4050 - total flux cleaned = -0.00690408 Jy ! Total flux subtracted in 4096 components = -0.00693614 Jy ! Clean residual min=-0.000964 max=0.000800 Jy/beam ! Clean residual mean=-0.000000 rms=0.000277 Jy/beam ! Combined flux in latest and established models = 0.551838 Jy keep ! Adding 307 model components to the UV plane model. ! The established model now contains 428 components and 0.551839 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uvm//J1522-2730_X_b_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8076 x 2.07 at -0.2312 degrees (North through East) ! Clean map min=-0.0020451 max=0.45694 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uvm//J1522-2730_X_b_map.fits wmodel /image_prod/ug002_uvm//J1522-2730_X_b_map.mod ! Writing 428 model components to file: /image_prod/ug002_uvm//J1522-2730_X_b_map.mod wobs /image_prod/ug002_uvm//J1522-2730_X_b_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uvm//J1522-2730_X_b_uvs.fits wwins /image_prod/ug002_uvm//J1522-2730_X_b_map.win ! wwins: Wrote 8 windows to /image_prod/ug002_uvm//J1522-2730_X_b_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.456944 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000277088 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.181919 0.181919 0.363837 0.727674 1.45535 2.9107 5.82139 11.6428 23.2856 46.5711 93.1423 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.456 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1649.09 quit ! Quitting program ! Log file /image_prod/ug002_uvm//J1522-2730_X_b_dfm.log closed on Wed Mar 4 17:23:25 2020