! Started logfile: /image_prod/ug002_uvm//J1506+3730_X_a_dfm.log on Wed Mar 4 17:21:28 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uvm//J1506+3730_X_a_uvm.fits ! Reading UV FITS file: /image_prod/ug002_uvm//J1506+3730_X_a_uvm.fits ! AN table 1: 30 integrations on 36 of 36 possible baselines. ! AN table 2: 12 integrations on 28 of 28 possible baselines. ! AN table 3: 18 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.813118 visibilities/baseline/integration-bin. ! Found source: J1506+3730 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 121 lines of history. ! ! Reading 21720 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1506+3730_X_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 26 telescope corrections were flagged in sub-array 1. ! A total of 8 telescope corrections were flagged in sub-array 2. ! A total of 24 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 26 telescope corrections were flagged in sub-array 1. ! A total of 8 telescope corrections were flagged in sub-array 2. ! A total of 24 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 26 telescope corrections were flagged in sub-array 1. ! A total of 8 telescope corrections were flagged in sub-array 2. ! A total of 24 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 26 telescope corrections were flagged in sub-array 1. ! A total of 8 telescope corrections were flagged in sub-array 2. ! A total of 24 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 5. ! A total of 26 telescope corrections were flagged in sub-array 1. ! A total of 8 telescope corrections were flagged in sub-array 2. ! A total of 24 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 6. ! A total of 26 telescope corrections were flagged in sub-array 1. ! A total of 8 telescope corrections were flagged in sub-array 2. ! A total of 24 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 7. ! A total of 26 telescope corrections were flagged in sub-array 1. ! A total of 8 telescope corrections were flagged in sub-array 2. ! A total of 24 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 8. ! A total of 26 telescope corrections were flagged in sub-array 1. ! A total of 8 telescope corrections were flagged in sub-array 2. ! A total of 24 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 9. ! A total of 26 telescope corrections were flagged in sub-array 1. ! A total of 8 telescope corrections were flagged in sub-array 2. ! A total of 24 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 10. ! A total of 26 telescope corrections were flagged in sub-array 1. ! A total of 8 telescope corrections were flagged in sub-array 2. ! A total of 24 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 11. ! A total of 26 telescope corrections were flagged in sub-array 1. ! A total of 8 telescope corrections were flagged in sub-array 2. ! A total of 24 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 12. ! A total of 26 telescope corrections were flagged in sub-array 1. ! A total of 8 telescope corrections were flagged in sub-array 2. ! A total of 24 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=1.137349Jy sigma=9.983247 ! Fit after self-cal, rms=0.497771Jy sigma=4.556682 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7619 mas, bmaj=1.487 mas, bpa=-18.47 degrees ! Estimated noise=0.846156 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.363921 Jy ! Component: 100 - total flux cleaned = 0.477323 Jy ! Total flux subtracted in 100 components = 0.477323 Jy ! Clean residual min=-0.014098 max=0.048342 Jy/beam ! Clean residual mean=-0.000018 rms=0.003127 Jy/beam ! Combined flux in latest and established models = 0.477323 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.477323 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.147963Jy sigma=1.216283 ! Fit after self-cal, rms=0.147713Jy sigma=1.213562 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.052258 Jy ! Component: 100 - total flux cleaned = 0.0806859 Jy ! Total flux subtracted in 100 components = 0.0806859 Jy ! Clean residual min=-0.010643 max=0.037532 Jy/beam ! Clean residual mean=-0.000014 rms=0.002334 Jy/beam ! Combined flux in latest and established models = 0.558008 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 16 components and 0.558008 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.112748Jy sigma=0.925923 ! Fit after self-cal, rms=0.112609Jy sigma=0.924408 ! Inverting map ! Added new window around map position (-1.2, -1.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0317964 Jy ! Component: 100 - total flux cleaned = 0.0493119 Jy ! Total flux subtracted in 100 components = 0.0493119 Jy ! Clean residual min=-0.009114 max=0.016351 Jy/beam ! Clean residual mean=-0.000011 rms=0.001906 Jy/beam ! Combined flux in latest and established models = 0.60732 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 30 components and 0.60732 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.096595Jy sigma=0.789603 ! Fit after self-cal, rms=0.095647Jy sigma=0.780657 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0151911 Jy ! Component: 100 - total flux cleaned = 0.0264157 Jy ! Total flux subtracted in 100 components = 0.0264157 Jy ! Clean residual min=-0.008203 max=0.011849 Jy/beam ! Clean residual mean=-0.000009 rms=0.001742 Jy/beam ! Combined flux in latest and established models = 0.633736 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 41 components and 0.633736 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.090112Jy sigma=0.737167 ! Fit after self-cal, rms=0.089967Jy sigma=0.735500 ! Inverting map ! Added new window around map position (1.2, 1.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0115722 Jy ! Component: 100 - total flux cleaned = 0.0206769 Jy ! Total flux subtracted in 100 components = 0.0206769 Jy ! Clean residual min=-0.007922 max=0.009524 Jy/beam ! Clean residual mean=-0.000008 rms=0.001655 Jy/beam ! Combined flux in latest and established models = 0.654413 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 51 components and 0.654413 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.086670Jy sigma=0.709382 ! Fit after self-cal, rms=0.086631Jy sigma=0.709119 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.005 mas, bmaj=1.819 mas, bpa=-16.7 degrees ! Estimated noise=0.566846 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2.2, -1.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.015062 Jy ! Component: 100 - total flux cleaned = 0.0255517 Jy ! Component: 150 - total flux cleaned = 0.0314795 Jy ! Component: 200 - total flux cleaned = 0.03637 Jy ! Total flux subtracted in 200 components = 0.03637 Jy ! Clean residual min=-0.008504 max=0.008669 Jy/beam ! Clean residual mean=-0.000024 rms=0.001970 Jy/beam ! Combined flux in latest and established models = 0.690783 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 78 components and 0.690783 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082450Jy sigma=0.678461 ! Fit after self-cal, rms=0.082389Jy sigma=0.677812 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.005 x 1.819 at -16.7 degrees (North through East) ! Clean map min=-0.0081445 max=0.4945 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.01 HN 1.00 KP 1.07 ! LA 1.00 MK 1.04 NL 1.04 OV 0.92 ! PT 0.91 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 FD 0.98 HN 0.94 KP 1.07 ! LA 1.00 MK 1.00 NL 1.56 OV 0.91 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.95 FD 1.02 HN 0.97 KP 1.09 ! LA 1.01 MK 0.98 NL 1.08 OV 1.02 ! PT 0.91 SC 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.99 HN 0.99 KP 1.08 ! LA 0.98 MK 1.03 NL 1.06 OV 0.92 ! PT 0.92 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 FD 0.97 HN 0.93 KP 1.06 ! LA 1.02 MK 1.01 NL 1.55 OV 0.90 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.95 FD 0.99 HN 0.99 KP 1.09 ! LA 1.00 MK 1.01 NL 1.09 OV 1.02 ! PT 0.89 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.99 HN 0.99 KP 1.08 ! LA 1.00 MK 1.03 NL 1.05 OV 0.91 ! PT 0.90 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 FD 0.97 HN 0.95 KP 1.06 ! LA 1.03 MK 1.00 NL 1.56 OV 0.88 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.94 FD 0.99 HN 0.99 KP 1.09 ! LA 1.00 MK 0.97 NL 1.08 OV 1.03 ! PT 0.91 SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.98 HN 1.01 KP 1.08 ! LA 0.99 MK 1.03 NL 1.06 OV 0.91 ! PT 0.90 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 FD 0.99 HN 0.95 KP 1.06 ! LA 1.03 MK 1.01 NL 1.49 OV 0.90 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.94 FD 1.00 HN 0.97 KP 1.10 ! LA 1.00 MK 0.99 NL 1.07 OV 1.02 ! PT 0.91 SC 1.00 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00 HN 0.97 KP 1.07 ! LA 0.98 MK 1.03 NL 1.05 OV 0.90 ! PT 0.90 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 FD 1.00 HN 0.94 KP 1.07 ! LA 1.03 MK 1.01 NL 1.53 OV 0.90 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.96 FD 1.02 HN 0.98 KP 1.09 ! LA 1.01 MK 1.00 NL 1.08 OV 1.02 ! PT 0.90 SC 1.00 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00 HN 1.00 KP 1.06 ! LA 0.98 MK 1.02 NL 1.06 OV 0.91 ! PT 0.90 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.96 FD 1.01 HN 0.95 KP 1.05 ! LA 0.98 MK 1.01 NL 1.58 OV 0.90 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.95 FD 1.01 HN 0.98 KP 1.10 ! LA 1.02 MK 0.99 NL 1.08 OV 1.02 ! PT 0.91 SC 1.01 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.99 HN 0.99 KP 1.09 ! LA 0.99 MK 1.01 NL 1.05 OV 0.90 ! PT 0.91 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 FD 0.99 HN 0.94 KP 1.06 ! LA 1.03 MK 1.01 NL 1.52 OV 0.89 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.95 FD 1.01 HN 1.02 KP 1.10 ! LA 1.00 MK 1.01 NL 1.06 OV 1.03 ! PT 0.91 SC 1.02 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.99 HN 0.96 KP 1.06 ! LA 0.99 MK 1.03 NL 1.05 OV 0.90 ! PT 0.90 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 FD 1.02 HN 0.92 KP 1.05 ! LA 1.00 MK 1.04 NL 1.51 OV 0.89 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.95 FD 1.01 HN 0.98 KP 1.08 ! LA 1.00 MK 0.97 NL 1.07 OV 1.04 ! PT 0.91 SC 1.04 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.99 HN 1.00 KP 1.06 ! LA 0.98 MK 1.00 NL 1.04 OV 0.91 ! PT 0.91 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.96 FD 1.00 HN 0.93 KP 1.03 ! LA 1.03 MK 1.00 NL 1.54 OV 0.88 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.96 FD 1.01 HN 0.99 KP 1.09 ! LA 1.00 MK 1.00 NL 1.08 OV 1.03 ! PT 0.92 SC 1.00 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00 HN 0.99 KP 1.06 ! LA 0.97 MK 1.01 NL 1.04 OV 0.91 ! PT 0.91 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.96 FD 1.00 HN 0.96 KP 1.06 ! LA 1.02 MK 1.00 NL 1.57 OV 0.87 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.94 FD 1.02 HN 1.01 KP 1.10 ! LA 1.00 MK 1.02 NL 1.06 OV 1.02 ! PT 0.90 SC 1.03 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.98 HN 0.98 KP 1.06 ! LA 0.98 MK 1.02 NL 1.04 OV 0.90 ! PT 0.92 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.93 FD 0.99 HN 0.95 KP 1.04 ! LA 1.04 MK 0.98 NL 1.49 OV 0.89 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.96 FD 1.00 HN 1.00 KP 1.09 ! LA 1.00 MK 0.99 NL 1.07 OV 1.04 ! PT 0.92 SC 1.02 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.99 HN 0.98 KP 1.06 ! LA 0.97 MK 1.01 NL 1.04 OV 0.90 ! PT 0.90 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 FD 0.97 HN 0.99 KP 1.02 ! LA 1.04 MK 0.98 NL 1.53 OV 0.90 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.96 FD 1.00 HN 1.02 KP 1.08 ! LA 1.01 MK 0.97 NL 1.07 OV 1.04 ! PT 0.90 SC 1.03 ! ! ! Fit before self-cal, rms=0.082389Jy sigma=0.677812 ! Fit after self-cal, rms=0.063623Jy sigma=0.527798 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.01 mas, bmaj=1.82 mas, bpa=-16.61 degrees ! Estimated noise=0.565937 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00665735 Jy ! Component: 100 - total flux cleaned = -0.0082896 Jy ! Component: 150 - total flux cleaned = -0.00884309 Jy ! Component: 200 - total flux cleaned = -0.00939231 Jy ! Total flux subtracted in 200 components = -0.00939231 Jy ! Clean residual min=-0.004283 max=0.006676 Jy/beam ! Clean residual mean=0.000002 rms=0.000838 Jy/beam ! Combined flux in latest and established models = 0.68139 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 96 components and 0.68139 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062626Jy sigma=0.518559 ! Fit after self-cal, rms=0.062686Jy sigma=0.518298 ! Inverting map ! Added new window around map position (-8.4, -8.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00608607 Jy ! Component: 100 - total flux cleaned = 0.00977602 Jy ! Component: 150 - total flux cleaned = 0.0117371 Jy ! Component: 200 - total flux cleaned = 0.0130037 Jy ! Total flux subtracted in 200 components = 0.0130037 Jy ! Clean residual min=-0.003792 max=0.004111 Jy/beam ! Clean residual mean=-0.000000 rms=0.000719 Jy/beam ! Combined flux in latest and established models = 0.694394 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 130 components and 0.694394 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061954Jy sigma=0.511779 ! Fit after self-cal, rms=0.061882Jy sigma=0.511268 ! Inverting map ! Added new window around map position (8.2, -25). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00288356 Jy ! Component: 100 - total flux cleaned = 0.00359374 Jy ! Component: 150 - total flux cleaned = 0.00394858 Jy ! Component: 200 - total flux cleaned = 0.00410995 Jy ! Total flux subtracted in 200 components = 0.00410995 Jy ! Clean residual min=-0.003599 max=0.003594 Jy/beam ! Clean residual mean=-0.000001 rms=0.000682 Jy/beam ! Combined flux in latest and established models = 0.698504 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 152 components and 0.698504 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061554Jy sigma=0.508394 ! Fit after self-cal, rms=0.061532Jy sigma=0.508138 ! Inverting map ! Added new window around map position (-3.2, -5.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00360536 Jy ! Component: 100 - total flux cleaned = 0.00556847 Jy ! Component: 150 - total flux cleaned = 0.00644195 Jy ! Component: 200 - total flux cleaned = 0.00680331 Jy ! Total flux subtracted in 200 components = 0.00680331 Jy ! Clean residual min=-0.003401 max=0.003048 Jy/beam ! Clean residual mean=-0.000000 rms=0.000639 Jy/beam ! Combined flux in latest and established models = 0.705307 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 172 components and 0.705307 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061251Jy sigma=0.505627 ! Fit after self-cal, rms=0.061234Jy sigma=0.505523 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061234Jy sigma=0.505523 ! Fit after self-cal, rms=0.059088Jy sigma=0.483829 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.01 mas, bmaj=1.822 mas, bpa=-16.61 degrees ! Estimated noise=0.566156 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00335839 Jy ! Component: 100 - total flux cleaned = -0.00388882 Jy ! Component: 150 - total flux cleaned = -0.00373088 Jy ! Component: 200 - total flux cleaned = -0.00336868 Jy ! Total flux subtracted in 200 components = -0.00336868 Jy ! Clean residual min=-0.002241 max=0.001961 Jy/beam ! Clean residual mean=0.000001 rms=0.000445 Jy/beam ! Combined flux in latest and established models = 0.701939 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 186 components and 0.701939 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058788Jy sigma=0.480868 ! Fit after self-cal, rms=0.058785Jy sigma=0.480827 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000543308 Jy ! Component: 100 - total flux cleaned = 0.000724559 Jy ! Component: 150 - total flux cleaned = 0.000999225 Jy ! Component: 200 - total flux cleaned = 0.0012035 Jy ! Total flux subtracted in 200 components = 0.0012035 Jy ! Clean residual min=-0.002083 max=0.001935 Jy/beam ! Clean residual mean=0.000001 rms=0.000427 Jy/beam ! Combined flux in latest and established models = 0.703142 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 199 components and 0.703142 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058692Jy sigma=0.479905 ! Fit after self-cal, rms=0.058686Jy sigma=0.479882 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058686Jy sigma=0.479882 ! Fit after self-cal, rms=0.058657Jy sigma=0.479046 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.01 mas, bmaj=1.823 mas, bpa=-16.6 degrees ! Estimated noise=0.565959 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00256848 Jy ! Component: 100 - total flux cleaned = -0.0035848 Jy ! Component: 150 - total flux cleaned = -0.00353439 Jy ! Component: 200 - total flux cleaned = -0.00338151 Jy ! Total flux subtracted in 200 components = -0.00338151 Jy ! Clean residual min=-0.001825 max=0.001809 Jy/beam ! Clean residual mean=0.000001 rms=0.000391 Jy/beam ! Combined flux in latest and established models = 0.699761 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 205 components and 0.699761 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058512Jy sigma=0.477577 ! Fit after self-cal, rms=0.058508Jy sigma=0.477560 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (5.8, -10.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.73377e-05 Jy ! Component: 100 - total flux cleaned = -1.09902e-06 Jy ! Component: 150 - total flux cleaned = 0.000140511 Jy ! Component: 200 - total flux cleaned = 0.000318045 Jy ! Total flux subtracted in 200 components = 0.000318045 Jy ! Clean residual min=-0.001770 max=0.001676 Jy/beam ! Clean residual mean=0.000001 rms=0.000376 Jy/beam ! Combined flux in latest and established models = 0.700079 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 220 components and 0.700079 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058414Jy sigma=0.476664 ! Fit after self-cal, rms=0.058411Jy sigma=0.476637 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058411Jy sigma=0.476637 ! Fit after self-cal, rms=0.058401Jy sigma=0.476248 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.225 mas, bmaj=2.58 mas, bpa=-10.09 degrees ! Estimated noise=0.709098 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00112996 Jy ! Component: 100 - total flux cleaned = -0.000869436 Jy ! Component: 150 - total flux cleaned = -0.000718182 Jy ! Component: 200 - total flux cleaned = -0.000634877 Jy ! Total flux subtracted in 200 components = -0.000634877 Jy ! Clean residual min=-0.002153 max=0.001999 Jy/beam ! Clean residual mean=0.000002 rms=0.000441 Jy/beam ! Combined flux in latest and established models = 0.699444 Jy selfcal ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 252 components and 0.699444 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058339Jy sigma=0.475701 ! Fit after self-cal, rms=0.058338Jy sigma=0.475673 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000378987 Jy ! Component: 100 - total flux cleaned = 0.000487029 Jy ! Component: 150 - total flux cleaned = 0.000521467 Jy ! Component: 200 - total flux cleaned = 0.000582184 Jy ! Total flux subtracted in 200 components = 0.000582184 Jy ! Clean residual min=-0.002111 max=0.001977 Jy/beam ! Clean residual mean=0.000002 rms=0.000427 Jy/beam ! Combined flux in latest and established models = 0.700026 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 268 components and 0.700026 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058322Jy sigma=0.475524 ! Fit after self-cal, rms=0.058322Jy sigma=0.475514 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=1.009 mas, bmaj=1.823 mas, bpa=-16.61 degrees ! Estimated noise=0.565618 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.009 x 1.823 at -16.61 degrees (North through East) ! Clean map min=-0.0022125 max=0.49242 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7629 mas, bmaj=1.488 mas, bpa=-18.49 degrees ! Estimated noise=0.848004 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.364359 Jy ! Component: 100 - total flux cleaned = 0.481184 Jy ! Component: 150 - total flux cleaned = 0.536591 Jy ! Component: 200 - total flux cleaned = 0.568832 Jy ! Total flux subtracted in 200 components = 0.568832 Jy ! Clean residual min=-0.004858 max=0.016823 Jy/beam ! Clean residual mean=-0.000008 rms=0.001268 Jy/beam ! Combined flux in latest and established models = 0.568833 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.568833 Jy ! Inverting map and beam ! Estimated beam: bmin=1.009 mas, bmaj=1.823 mas, bpa=-16.61 degrees ! Estimated noise=0.565618 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0327195 Jy ! Component: 100 - total flux cleaned = 0.05127 Jy ! Component: 150 - total flux cleaned = 0.0632987 Jy ! Component: 200 - total flux cleaned = 0.0722749 Jy ! Total flux subtracted in 200 components = 0.0722749 Jy ! Clean residual min=-0.002977 max=0.005309 Jy/beam ! Clean residual mean=-0.000009 rms=0.000877 Jy/beam ! Combined flux in latest and established models = 0.641108 Jy ! Adding 58 model components to the UV plane model. ! The established model now contains 63 components and 0.641108 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0072465 Jy ! Component: 100 - total flux cleaned = 0.0133457 Jy ! Component: 150 - total flux cleaned = 0.0185482 Jy ! Component: 200 - total flux cleaned = 0.0230492 Jy ! Total flux subtracted in 200 components = 0.0230492 Jy ! Clean residual min=-0.002443 max=0.003018 Jy/beam ! Clean residual mean=-0.000004 rms=0.000608 Jy/beam ! Combined flux in latest and established models = 0.664157 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 100 components and 0.664157 Jy ! Inverting map ! Added new window around map position (-6.6, -6.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00403026 Jy ! Component: 100 - total flux cleaned = 0.0075891 Jy ! Component: 150 - total flux cleaned = 0.0107841 Jy ! Component: 200 - total flux cleaned = 0.0136817 Jy ! Total flux subtracted in 200 components = 0.0136817 Jy ! Clean residual min=-0.002318 max=0.002272 Jy/beam ! Clean residual mean=-0.000002 rms=0.000484 Jy/beam ! Combined flux in latest and established models = 0.677839 Jy ! Adding 57 model components to the UV plane model. ! The established model now contains 135 components and 0.677839 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.225 mas, bmaj=2.58 mas, bpa=-10.09 degrees ! Estimated noise=0.709098 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00443558 Jy ! Component: 100 - total flux cleaned = 0.007929 Jy ! Component: 150 - total flux cleaned = 0.0108318 Jy ! Component: 200 - total flux cleaned = 0.0132868 Jy ! Total flux subtracted in 200 components = 0.0132868 Jy ! Clean residual min=-0.002019 max=0.001791 Jy/beam ! Clean residual mean=0.000000 rms=0.000535 Jy/beam ! Combined flux in latest and established models = 0.691125 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00169589 Jy ! Component: 100 - total flux cleaned = 0.00304043 Jy ! Component: 150 - total flux cleaned = 0.00410265 Jy ! Component: 200 - total flux cleaned = 0.00493958 Jy ! Total flux subtracted in 200 components = 0.00493958 Jy ! Clean residual min=-0.002017 max=0.001736 Jy/beam ! Clean residual mean=0.000001 rms=0.000463 Jy/beam ! Combined flux in latest and established models = 0.696065 Jy ! Adding 130 model components to the UV plane model. ! The established model now contains 235 components and 0.696065 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.009 mas, bmaj=1.823 mas, bpa=-16.61 degrees ! Estimated noise=0.565618 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000398951 Jy ! Component: 100 - total flux cleaned = 5.23814e-08 Jy ! Component: 150 - total flux cleaned = 0.000153816 Jy ! Component: 200 - total flux cleaned = 0.000297141 Jy ! Total flux subtracted in 200 components = 0.000297141 Jy ! Clean residual min=-0.001969 max=0.001594 Jy/beam ! Clean residual mean=0.000001 rms=0.000355 Jy/beam ! Combined flux in latest and established models = 0.696362 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 262 components and 0.696362 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058338Jy sigma=0.475638 ! Fit after self-cal, rms=0.058265Jy sigma=0.475087 wmodel J1506+3730_X_a_map.mod ! Writing 262 model components to file: J1506+3730_X_a_map.mod wobs J1506+3730_X_a_uvs.fits ! Writing UV FITS file: J1506+3730_X_a_uvs.fits wwins J1506+3730_X_a_map.win ! wwins: Wrote 9 windows to J1506+3730_X_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000182807 Jy ! Component: 100 - total flux cleaned = -0.000295951 Jy ! Component: 150 - total flux cleaned = -0.000589024 Jy ! Component: 200 - total flux cleaned = -0.000666257 Jy ! Component: 250 - total flux cleaned = -0.000740919 Jy ! Component: 300 - total flux cleaned = -0.000740727 Jy ! Component: 350 - total flux cleaned = -0.000740564 Jy ! Component: 400 - total flux cleaned = -0.000694235 Jy ! Component: 450 - total flux cleaned = -0.000763238 Jy ! Component: 500 - total flux cleaned = -0.000763157 Jy ! Component: 550 - total flux cleaned = -0.000740857 Jy ! Component: 600 - total flux cleaned = -0.000740709 Jy ! Component: 650 - total flux cleaned = -0.000740878 Jy ! Component: 700 - total flux cleaned = -0.000825824 Jy ! Component: 750 - total flux cleaned = -0.000909061 Jy ! Component: 800 - total flux cleaned = -0.000867699 Jy ! Component: 850 - total flux cleaned = -0.00090882 Jy ! Component: 900 - total flux cleaned = -0.000949404 Jy ! Component: 950 - total flux cleaned = -0.000989192 Jy ! Component: 1000 - total flux cleaned = -0.00104821 Jy ! Component: 1050 - total flux cleaned = -0.00104828 Jy ! Component: 1100 - total flux cleaned = -0.00114463 Jy ! Component: 1150 - total flux cleaned = -0.00112527 Jy ! Component: 1200 - total flux cleaned = -0.00110637 Jy ! Component: 1250 - total flux cleaned = -0.0011626 Jy ! Component: 1300 - total flux cleaned = -0.00112584 Jy ! Component: 1350 - total flux cleaned = -0.00119945 Jy ! Component: 1400 - total flux cleaned = -0.00127217 Jy ! Component: 1450 - total flux cleaned = -0.00127196 Jy ! Component: 1500 - total flux cleaned = -0.00130792 Jy ! Component: 1550 - total flux cleaned = -0.00137884 Jy ! Component: 1600 - total flux cleaned = -0.00132596 Jy ! Component: 1650 - total flux cleaned = -0.00136104 Jy ! Component: 1700 - total flux cleaned = -0.00139565 Jy ! Component: 1750 - total flux cleaned = -0.00143022 Jy ! Component: 1800 - total flux cleaned = -0.00141309 Jy ! Component: 1850 - total flux cleaned = -0.0014302 Jy ! Component: 1900 - total flux cleaned = -0.00146416 Jy ! Component: 1950 - total flux cleaned = -0.00148086 Jy ! Component: 2000 - total flux cleaned = -0.00146424 Jy ! Component: 2050 - total flux cleaned = -0.00153048 Jy ! Component: 2100 - total flux cleaned = -0.00159613 Jy ! Component: 2150 - total flux cleaned = -0.00161237 Jy ! Component: 2200 - total flux cleaned = -0.0015962 Jy ! Component: 2250 - total flux cleaned = -0.00161238 Jy ! Component: 2300 - total flux cleaned = -0.0016124 Jy ! Component: 2350 - total flux cleaned = -0.00161248 Jy ! Component: 2400 - total flux cleaned = -0.00172311 Jy ! Component: 2450 - total flux cleaned = -0.00177049 Jy ! Component: 2500 - total flux cleaned = -0.00177032 Jy ! Component: 2550 - total flux cleaned = -0.00175483 Jy ! Component: 2600 - total flux cleaned = -0.00172399 Jy ! Component: 2650 - total flux cleaned = -0.00183171 Jy ! Component: 2700 - total flux cleaned = -0.00184694 Jy ! Component: 2750 - total flux cleaned = -0.00184707 Jy ! Component: 2800 - total flux cleaned = -0.00175632 Jy ! Component: 2850 - total flux cleaned = -0.00184658 Jy ! Component: 2900 - total flux cleaned = -0.00189155 Jy ! Component: 2950 - total flux cleaned = -0.00186156 Jy ! Component: 3000 - total flux cleaned = -0.00192093 Jy ! Component: 3050 - total flux cleaned = -0.0019505 Jy ! Component: 3100 - total flux cleaned = -0.00206799 Jy ! Component: 3150 - total flux cleaned = -0.00209726 Jy ! Component: 3200 - total flux cleaned = -0.0020826 Jy ! Component: 3250 - total flux cleaned = -0.00212604 Jy ! Component: 3300 - total flux cleaned = -0.00214032 Jy ! Component: 3350 - total flux cleaned = -0.00219759 Jy ! Component: 3400 - total flux cleaned = -0.00216903 Jy ! Component: 3450 - total flux cleaned = -0.00228257 Jy ! Component: 3500 - total flux cleaned = -0.0022261 Jy ! Component: 3550 - total flux cleaned = -0.0022402 Jy ! Component: 3600 - total flux cleaned = -0.00233825 Jy ! Component: 3650 - total flux cleaned = -0.00236618 Jy ! Component: 3700 - total flux cleaned = -0.00240777 Jy ! Component: 3750 - total flux cleaned = -0.0023525 Jy ! Component: 3800 - total flux cleaned = -0.00238005 Jy ! Component: 3850 - total flux cleaned = -0.00247583 Jy ! Component: 3900 - total flux cleaned = -0.00251684 Jy ! Component: 3950 - total flux cleaned = -0.00248971 Jy ! Component: 4000 - total flux cleaned = -0.00240856 Jy ! Component: 4050 - total flux cleaned = -0.00248943 Jy ! Total flux subtracted in 4096 components = -0.00256998 Jy ! Clean residual min=-0.000760 max=0.000706 Jy/beam ! Clean residual mean=-0.000000 rms=0.000242 Jy/beam ! Combined flux in latest and established models = 0.693792 Jy keep ! Adding 336 model components to the UV plane model. ! The established model now contains 597 components and 0.693792 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uvm//J1506+3730_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.009 x 1.823 at -16.61 degrees (North through East) ! Clean map min=-0.0015796 max=0.49327 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uvm//J1506+3730_X_a_map.fits wmodel /image_prod/ug002_uvm//J1506+3730_X_a_map.mod ! Writing 597 model components to file: /image_prod/ug002_uvm//J1506+3730_X_a_map.mod wobs /image_prod/ug002_uvm//J1506+3730_X_a_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uvm//J1506+3730_X_a_uvs.fits wwins /image_prod/ug002_uvm//J1506+3730_X_a_map.win ! wwins: Wrote 10 windows to /image_prod/ug002_uvm//J1506+3730_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.493266 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000241469 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.146859 0.146859 0.293719 0.587438 1.17488 2.34975 4.6995 9.399 18.798 37.596 75.192 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.493 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2042.77 quit ! Quitting program ! Log file /image_prod/ug002_uvm//J1506+3730_X_a_dfm.log closed on Wed Mar 4 17:21:35 2020