! Started logfile: /image_prod/ug002_uvm//J1500+4751_X_a_dfm.log on Wed Mar 4 17:21:04 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uvm//J1500+4751_X_a_uvm.fits ! Reading UV FITS file: /image_prod/ug002_uvm//J1500+4751_X_a_uvm.fits ! AN table 1: 6 integrations on 36 of 36 possible baselines. ! AN table 2: 14 integrations on 45 of 45 possible baselines. ! AN table 3: 20 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.876756 visibilities/baseline/integration-bin. ! Found source: J1500+4751 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 121 lines of history. ! ! Reading 16476 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1500+4751_X_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 16 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 16 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 16 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 16 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 5. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 16 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 6. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 16 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 7. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 16 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 8. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 16 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 9. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 16 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 10. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 16 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 11. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 16 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 12. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 16 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=1.031335Jy sigma=10.253592 ! Fit after self-cal, rms=0.799239Jy sigma=7.958143 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7164 mas, bmaj=1.259 mas, bpa=-17.88 degrees ! Estimated noise=0.925901 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.14574 Jy ! Component: 100 - total flux cleaned = 0.200923 Jy ! Total flux subtracted in 100 components = 0.200923 Jy ! Clean residual min=-0.012388 max=0.049548 Jy/beam ! Clean residual mean=-0.000004 rms=0.002897 Jy/beam ! Combined flux in latest and established models = 0.200923 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.200923 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.114105Jy sigma=1.108405 ! Fit after self-cal, rms=0.113676Jy sigma=1.104386 ! Inverting map ! Added new window around map position (1, 0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0453825 Jy ! Component: 100 - total flux cleaned = 0.0693609 Jy ! Total flux subtracted in 100 components = 0.0693609 Jy ! Clean residual min=-0.009420 max=0.016465 Jy/beam ! Clean residual mean=-0.000005 rms=0.002005 Jy/beam ! Combined flux in latest and established models = 0.270284 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 11 components and 0.270284 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.089143Jy sigma=0.872631 ! Fit after self-cal, rms=0.087576Jy sigma=0.858043 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0191067 Jy ! Component: 100 - total flux cleaned = 0.0308959 Jy ! Total flux subtracted in 100 components = 0.0308959 Jy ! Clean residual min=-0.007840 max=0.009129 Jy/beam ! Clean residual mean=-0.000005 rms=0.001692 Jy/beam ! Combined flux in latest and established models = 0.30118 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 16 components and 0.30118 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082353Jy sigma=0.812823 ! Fit after self-cal, rms=0.081985Jy sigma=0.809211 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9049 mas, bmaj=1.505 mas, bpa=-14.73 degrees ! Estimated noise=0.589688 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00952317 Jy ! Component: 100 - total flux cleaned = 0.0133953 Jy ! Component: 150 - total flux cleaned = 0.0136725 Jy ! Component: 200 - total flux cleaned = 0.0135613 Jy ! Total flux subtracted in 200 components = 0.0135613 Jy ! Clean residual min=-0.008495 max=0.012449 Jy/beam ! Clean residual mean=-0.000019 rms=0.002645 Jy/beam ! Combined flux in latest and established models = 0.314741 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 25 components and 0.314741 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080677Jy sigma=0.799181 ! Fit after self-cal, rms=0.080510Jy sigma=0.797671 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9049 x 1.505 at -14.73 degrees (North through East) ! Clean map min=-0.0083297 max=0.19747 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 HN 0.90 KP 1.06 LA 0.95 ! MK 1.08 NL 1.10 OV 0.88 PT 0.87 ! SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 0.99 HN 0.80 KP 1.93 ! LA 1.00 MK 1.04 NL 1.19 OV 0.86 ! PT 0.85 SC 1.05 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.97 FD 0.98 HN 0.91 KP 1.02 ! LA 1.04 MK 1.07 OV 0.90 PT 0.91 ! SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 HN 0.86 KP 1.05 LA 0.97 ! MK 1.04 NL 1.10 OV 0.86 PT 0.87 ! SC 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.93 FD 0.97 HN 0.80 KP 2.12 ! LA 0.98 MK 0.98 NL 1.16 OV 0.88 ! PT 0.88 SC 1.02 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 FD 1.00 HN 0.91 KP 1.01 ! LA 1.03 MK 1.05 OV 0.90 PT 0.89 ! SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 HN 0.84 KP 1.07 LA 0.95 ! MK 1.04 NL 1.10 OV 0.87 PT 0.89 ! SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 FD 0.96 HN 0.84 KP 2.17 ! LA 0.98 MK 1.01 NL 1.17 OV 0.87 ! PT 0.86 SC 1.01 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 0.99 HN 0.90 KP 1.03 ! LA 1.04 MK 1.13 OV 0.89 PT 0.91 ! SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 HN 0.85 KP 1.07 LA 0.98 ! MK 1.09 NL 1.14 OV 0.90 PT 0.88 ! SC 0.92 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.93 FD 0.99 HN 0.83 KP 2.15 ! LA 0.99 MK 1.05 NL 1.21 OV 0.89 ! PT 0.86 SC 1.01 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 1.01 HN 0.91 KP 1.02 ! LA 1.01 MK 1.10 OV 0.91 PT 0.90 ! SC 0.94 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 HN 0.89 KP 1.02 LA 0.96 ! MK 1.07 NL 1.09 OV 0.90 PT 0.86 ! SC 0.93 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 FD 0.98 HN 0.80 KP 2.04 ! LA 0.99 MK 0.94 NL 1.18 OV 0.88 ! PT 0.87 SC 0.98 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 1.00 HN 0.94 KP 1.03 ! LA 1.03 MK 1.06 OV 0.92 PT 0.91 ! SC 0.96 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 HN 0.88 KP 1.09 LA 0.99 ! MK 1.04 NL 1.10 OV 0.88 PT 0.87 ! SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 0.97 HN 0.79 KP 2.01 ! LA 0.98 MK 1.00 NL 1.18 OV 0.89 ! PT 0.88 SC 0.97 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 1.01 HN 0.96 KP 1.05 ! LA 1.03 MK 1.10 OV 0.90 PT 0.89 ! SC 0.97 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 HN 0.93 KP 1.04 LA 0.99 ! MK 1.13 NL 1.06 OV 0.89 PT 0.87 ! SC 0.93 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 0.99 HN 0.79 KP 1.98 ! LA 0.98 MK 1.02 NL 1.18 OV 0.88 ! PT 0.86 SC 1.04 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 1.01 HN 0.89 KP 1.03 ! LA 1.03 MK 1.05 OV 0.90 PT 0.91 ! SC 1.01 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 HN 0.98 KP 1.06 LA 0.98 ! MK 1.08 NL 1.12 OV 0.88 PT 0.85 ! SC 1.06 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 0.97 HN 0.85 KP 1.96 ! LA 0.97 MK 1.02 NL 1.17 OV 0.89 ! PT 0.85 SC 0.98 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.01 FD 0.99 HN 0.93 KP 1.03 ! LA 1.02 MK 1.04 OV 0.92 PT 0.90 ! SC 0.96 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 HN 0.99 KP 1.06 LA 0.98 ! MK 1.08 NL 1.12 OV 0.88 PT 0.87 ! SC 1.04 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 FD 0.97 HN 0.83 KP 2.03 ! LA 0.98 MK 0.98 NL 1.21 OV 0.92 ! PT 0.87 SC 1.02 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 0.98 HN 0.89 KP 1.02 ! LA 1.01 MK 1.05 OV 0.92 PT 0.92 ! SC 0.98 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 HN 0.92 KP 1.08 LA 0.96 ! MK 1.10 NL 1.09 OV 0.91 PT 0.90 ! SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 FD 0.99 HN 0.84 KP 1.96 ! LA 0.99 MK 0.98 NL 1.22 OV 0.86 ! PT 0.87 SC 1.06 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 1.00 HN 0.92 KP 1.00 ! LA 1.02 MK 1.10 OV 0.93 PT 0.91 ! SC 0.99 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 HN 0.89 KP 1.06 LA 0.99 ! MK 1.09 NL 1.09 OV 0.88 PT 0.88 ! SC 1.05 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 0.96 HN 0.84 KP 1.94 ! LA 0.95 MK 1.00 NL 1.18 OV 0.89 ! PT 0.90 SC 1.00 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 0.99 HN 0.94 KP 1.04 ! LA 1.01 MK 1.08 OV 0.90 PT 0.92 ! SC 0.96 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 HN 0.94 KP 1.04 LA 0.99 ! MK 0.98 NL 1.11 OV 0.90 PT 0.90 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 0.98 HN 0.84 KP 1.85 ! LA 0.98 MK 1.01 NL 1.17 OV 0.93 ! PT 0.85 SC 1.04 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.96 FD 0.99 HN 0.88 KP 1.04 ! LA 1.04 MK 1.17 OV 0.91 PT 0.92 ! SC 0.98 ! ! ! Fit before self-cal, rms=0.080510Jy sigma=0.797671 ! Fit after self-cal, rms=0.090966Jy sigma=0.651150 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9075 mas, bmaj=1.496 mas, bpa=-14.81 degrees ! Estimated noise=0.583657 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00420541 Jy ! Component: 100 - total flux cleaned = 0.00429512 Jy ! Component: 150 - total flux cleaned = 0.00429993 Jy ! Component: 200 - total flux cleaned = 0.00424564 Jy ! Total flux subtracted in 200 components = 0.00424564 Jy ! Clean residual min=-0.006190 max=0.005947 Jy/beam ! Clean residual mean=-0.000007 rms=0.001531 Jy/beam ! Combined flux in latest and established models = 0.318987 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 32 components and 0.318987 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.090704Jy sigma=0.648114 ! Fit after self-cal, rms=0.090753Jy sigma=0.646627 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.090753Jy sigma=0.646627 ! Fit after self-cal, rms=0.122695Jy sigma=0.540800 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9065 mas, bmaj=1.489 mas, bpa=-15.08 degrees ! Estimated noise=0.583351 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0014339 Jy ! Component: 100 - total flux cleaned = 0.0014365 Jy ! Component: 150 - total flux cleaned = 0.00148542 Jy ! Component: 200 - total flux cleaned = 0.00156901 Jy ! Total flux subtracted in 200 components = 0.00156901 Jy ! Clean residual min=-0.001915 max=0.003609 Jy/beam ! Clean residual mean=-0.000002 rms=0.000447 Jy/beam ! Combined flux in latest and established models = 0.320556 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 38 components and 0.320556 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.122627Jy sigma=0.539107 ! Fit after self-cal, rms=0.122883Jy sigma=0.538263 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (6.6, 1.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00274742 Jy ! Component: 100 - total flux cleaned = 0.00374642 Jy ! Component: 150 - total flux cleaned = 0.0046387 Jy ! Component: 200 - total flux cleaned = 0.00503844 Jy ! Total flux subtracted in 200 components = 0.00503844 Jy ! Clean residual min=-0.001688 max=0.001963 Jy/beam ! Clean residual mean=-0.000001 rms=0.000397 Jy/beam ! Combined flux in latest and established models = 0.325594 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 48 components and 0.325594 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.122759Jy sigma=0.536063 ! Fit after self-cal, rms=0.122725Jy sigma=0.535709 ! Inverting map ! Added new window around map position (1, -31.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000807197 Jy ! Component: 100 - total flux cleaned = 0.00121795 Jy ! Component: 150 - total flux cleaned = 0.00146854 Jy ! Component: 200 - total flux cleaned = 0.0016827 Jy ! Total flux subtracted in 200 components = 0.0016827 Jy ! Clean residual min=-0.001705 max=0.001654 Jy/beam ! Clean residual mean=0.000000 rms=0.000379 Jy/beam ! Combined flux in latest and established models = 0.327277 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 58 components and 0.327277 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.122673Jy sigma=0.534562 ! Fit after self-cal, rms=0.122657Jy sigma=0.534437 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.122657Jy sigma=0.534437 ! Fit after self-cal, rms=0.123291Jy sigma=0.533928 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9073 mas, bmaj=1.49 mas, bpa=-15 degrees ! Estimated noise=0.583141 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00104569 Jy ! Component: 100 - total flux cleaned = 0.00181443 Jy ! Component: 150 - total flux cleaned = 0.00215878 Jy ! Component: 200 - total flux cleaned = 0.00234463 Jy ! Total flux subtracted in 200 components = 0.00234463 Jy ! Clean residual min=-0.001638 max=0.001667 Jy/beam ! Clean residual mean=-0.000002 rms=0.000352 Jy/beam ! Combined flux in latest and established models = 0.329622 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 63 components and 0.329622 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.123252Jy sigma=0.533102 ! Fit after self-cal, rms=0.123247Jy sigma=0.532976 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000160663 Jy ! Component: 100 - total flux cleaned = 0.000493516 Jy ! Component: 150 - total flux cleaned = 0.000691809 Jy ! Component: 200 - total flux cleaned = 0.000875072 Jy ! Total flux subtracted in 200 components = 0.000875072 Jy ! Clean residual min=-0.001602 max=0.001596 Jy/beam ! Clean residual mean=-0.000002 rms=0.000344 Jy/beam ! Combined flux in latest and established models = 0.330497 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 68 components and 0.330497 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.123226Jy sigma=0.532499 ! Fit after self-cal, rms=0.123220Jy sigma=0.532416 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.123220Jy sigma=0.532416 ! Fit after self-cal, rms=0.123013Jy sigma=0.532314 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.163 mas, bmaj=2.472 mas, bpa=-21.22 degrees ! Estimated noise=0.775686 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00151473 Jy ! Component: 100 - total flux cleaned = 0.00190712 Jy ! Component: 150 - total flux cleaned = 0.00202071 Jy ! Component: 200 - total flux cleaned = 0.00215288 Jy ! Total flux subtracted in 200 components = 0.00215288 Jy ! Clean residual min=-0.001491 max=0.001623 Jy/beam ! Clean residual mean=-0.000005 rms=0.000390 Jy/beam ! Combined flux in latest and established models = 0.33265 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 83 components and 0.33265 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.123000Jy sigma=0.532109 ! Fit after self-cal, rms=0.123000Jy sigma=0.532028 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000148569 Jy ! Component: 100 - total flux cleaned = 0.0003983 Jy ! Component: 150 - total flux cleaned = 0.000529854 Jy ! Component: 200 - total flux cleaned = 0.000657921 Jy ! Total flux subtracted in 200 components = 0.000657921 Jy ! Clean residual min=-0.001484 max=0.001605 Jy/beam ! Clean residual mean=-0.000004 rms=0.000386 Jy/beam ! Combined flux in latest and established models = 0.333307 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 89 components and 0.333307 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.122995Jy sigma=0.531919 ! Fit after self-cal, rms=0.122991Jy sigma=0.531861 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.908 mas, bmaj=1.49 mas, bpa=-14.93 degrees ! Estimated noise=0.583369 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.908 x 1.49 at -14.93 degrees (North through East) ! Clean map min=-0.0014045 max=0.19241 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7227 mas, bmaj=1.251 mas, bpa=-17.9 degrees ! Estimated noise=0.904846 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.145326 Jy ! Component: 100 - total flux cleaned = 0.209978 Jy ! Component: 150 - total flux cleaned = 0.247004 Jy ! Component: 200 - total flux cleaned = 0.270223 Jy ! Total flux subtracted in 200 components = 0.270223 Jy ! Clean residual min=-0.004256 max=0.012244 Jy/beam ! Clean residual mean=-0.000002 rms=0.001061 Jy/beam ! Combined flux in latest and established models = 0.270223 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.270223 Jy ! Inverting map and beam ! Estimated beam: bmin=0.908 mas, bmaj=1.49 mas, bpa=-14.93 degrees ! Estimated noise=0.583369 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0215854 Jy ! Component: 100 - total flux cleaned = 0.0336866 Jy ! Component: 150 - total flux cleaned = 0.0412054 Jy ! Component: 200 - total flux cleaned = 0.0465141 Jy ! Total flux subtracted in 200 components = 0.0465141 Jy ! Clean residual min=-0.002058 max=0.003416 Jy/beam ! Clean residual mean=-0.000006 rms=0.000468 Jy/beam ! Combined flux in latest and established models = 0.316737 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 43 components and 0.316737 Jy ! Inverting map ! Added new window around map position (1.8, 0.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00406204 Jy ! Component: 100 - total flux cleaned = 0.00716575 Jy ! Component: 150 - total flux cleaned = 0.00962034 Jy ! Component: 200 - total flux cleaned = 0.0115825 Jy ! Total flux subtracted in 200 components = 0.0115825 Jy ! Clean residual min=-0.001558 max=0.001871 Jy/beam ! Clean residual mean=-0.000003 rms=0.000354 Jy/beam ! Combined flux in latest and established models = 0.328319 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 54 components and 0.328319 Jy ! Inverting map ! Added new window around map position (-1, -0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00096291 Jy ! Component: 100 - total flux cleaned = 0.00174465 Jy ! Component: 150 - total flux cleaned = 0.00232563 Jy ! Component: 200 - total flux cleaned = 0.00279538 Jy ! Total flux subtracted in 200 components = 0.00279538 Jy ! Clean residual min=-0.001436 max=0.001482 Jy/beam ! Clean residual mean=-0.000003 rms=0.000332 Jy/beam ! Combined flux in latest and established models = 0.331115 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 68 components and 0.331115 Jy ! Inverting map ! Added new window around map position (43.8, 16.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00115606 Jy ! Component: 100 - total flux cleaned = 0.00156002 Jy ! Component: 150 - total flux cleaned = 0.0017872 Jy ! Component: 200 - total flux cleaned = 0.0020008 Jy ! Total flux subtracted in 200 components = 0.0020008 Jy ! Clean residual min=-0.001422 max=0.001463 Jy/beam ! Clean residual mean=-0.000003 rms=0.000322 Jy/beam ! Combined flux in latest and established models = 0.333115 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 84 components and 0.333115 Jy ! Inverting map ! Added new window around map position (50.2, 27.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000838716 Jy ! Component: 100 - total flux cleaned = 0.00111282 Jy ! Component: 150 - total flux cleaned = 0.00124251 Jy ! Component: 200 - total flux cleaned = 0.00136677 Jy ! Total flux subtracted in 200 components = 0.00136677 Jy ! Clean residual min=-0.001393 max=0.001351 Jy/beam ! Clean residual mean=-0.000002 rms=0.000315 Jy/beam ! Combined flux in latest and established models = 0.334482 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 98 components and 0.334482 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.163 mas, bmaj=2.472 mas, bpa=-21.22 degrees ! Estimated noise=0.775686 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000526441 Jy ! Component: 100 - total flux cleaned = 0.000684641 Jy ! Component: 150 - total flux cleaned = 0.000757382 Jy ! Component: 200 - total flux cleaned = 0.000800054 Jy ! Total flux subtracted in 200 components = 0.000800054 Jy ! Clean residual min=-0.001358 max=0.001568 Jy/beam ! Clean residual mean=-0.000003 rms=0.000370 Jy/beam ! Combined flux in latest and established models = 0.335282 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000109397 Jy ! Component: 100 - total flux cleaned = 0.000222295 Jy ! Component: 150 - total flux cleaned = 0.000323631 Jy ! Component: 200 - total flux cleaned = 0.000402978 Jy ! Total flux subtracted in 200 components = 0.000402978 Jy ! Clean residual min=-0.001375 max=0.001555 Jy/beam ! Clean residual mean=-0.000003 rms=0.000366 Jy/beam ! Combined flux in latest and established models = 0.335685 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 138 components and 0.335685 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.908 mas, bmaj=1.49 mas, bpa=-14.93 degrees ! Estimated noise=0.583369 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000152184 Jy ! Component: 100 - total flux cleaned = -2.03e-05 Jy ! Component: 150 - total flux cleaned = -4.62247e-05 Jy ! Component: 200 - total flux cleaned = 5.29157e-06 Jy ! Total flux subtracted in 200 components = 5.29157e-06 Jy ! Clean residual min=-0.001368 max=0.001329 Jy/beam ! Clean residual mean=-0.000001 rms=0.000308 Jy/beam ! Combined flux in latest and established models = 0.33569 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 151 components and 0.33569 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.122899Jy sigma=0.529764 ! Fit after self-cal, rms=0.122890Jy sigma=0.529436 wmodel J1500+4751_X_a_map.mod ! Writing 151 model components to file: J1500+4751_X_a_map.mod wobs J1500+4751_X_a_uvs.fits ! Writing UV FITS file: J1500+4751_X_a_uvs.fits wwins J1500+4751_X_a_map.win ! wwins: Wrote 8 windows to J1500+4751_X_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000158235 Jy ! Component: 100 - total flux cleaned = -0.000157141 Jy ! Component: 150 - total flux cleaned = -0.000180126 Jy ! Component: 200 - total flux cleaned = -0.000246787 Jy ! Component: 250 - total flux cleaned = -0.000289774 Jy ! Component: 300 - total flux cleaned = -0.000248023 Jy ! Component: 350 - total flux cleaned = -0.000227827 Jy ! Component: 400 - total flux cleaned = -0.00016752 Jy ! Component: 450 - total flux cleaned = -0.00016755 Jy ! Component: 500 - total flux cleaned = -0.000108987 Jy ! Component: 550 - total flux cleaned = -7.09242e-05 Jy ! Component: 600 - total flux cleaned = -7.12518e-05 Jy ! Component: 650 - total flux cleaned = -5.25997e-05 Jy ! Component: 700 - total flux cleaned = -3.38682e-05 Jy ! Component: 750 - total flux cleaned = -1.53953e-05 Jy ! Component: 800 - total flux cleaned = 2.46924e-06 Jy ! Component: 850 - total flux cleaned = 3.83151e-05 Jy ! Component: 900 - total flux cleaned = 7.3646e-05 Jy ! Component: 950 - total flux cleaned = 3.88179e-05 Jy ! Component: 1000 - total flux cleaned = 0.000125851 Jy ! Component: 1050 - total flux cleaned = 0.000160597 Jy ! Component: 1100 - total flux cleaned = 0.000262952 Jy ! Component: 1150 - total flux cleaned = 0.00021185 Jy ! Component: 1200 - total flux cleaned = 0.000262411 Jy ! Component: 1250 - total flux cleaned = 0.000312449 Jy ! Component: 1300 - total flux cleaned = 0.000345572 Jy ! Component: 1350 - total flux cleaned = 0.000394588 Jy ! Component: 1400 - total flux cleaned = 0.000476053 Jy ! Component: 1450 - total flux cleaned = 0.000492304 Jy ! Component: 1500 - total flux cleaned = 0.00046017 Jy ! Component: 1550 - total flux cleaned = 0.000619399 Jy ! Component: 1600 - total flux cleaned = 0.000587593 Jy ! Component: 1650 - total flux cleaned = 0.000603288 Jy ! Component: 1700 - total flux cleaned = 0.000665939 Jy ! Component: 1750 - total flux cleaned = 0.000681292 Jy ! Component: 1800 - total flux cleaned = 0.000758482 Jy ! Component: 1850 - total flux cleaned = 0.000727981 Jy ! Component: 1900 - total flux cleaned = 0.000819431 Jy ! Component: 1950 - total flux cleaned = 0.000819364 Jy ! Component: 2000 - total flux cleaned = 0.000894675 Jy ! Component: 2050 - total flux cleaned = 0.000924615 Jy ! Component: 2100 - total flux cleaned = 0.000909633 Jy ! Component: 2150 - total flux cleaned = 0.00092443 Jy ! Component: 2200 - total flux cleaned = 0.000968646 Jy ! Component: 2250 - total flux cleaned = 0.000924641 Jy ! Component: 2300 - total flux cleaned = 0.00107021 Jy ! Component: 2350 - total flux cleaned = 0.0010558 Jy ! Component: 2400 - total flux cleaned = 0.00101262 Jy ! Component: 2450 - total flux cleaned = 0.00106989 Jy ! Component: 2500 - total flux cleaned = 0.00115542 Jy ! Component: 2550 - total flux cleaned = 0.00118362 Jy ! Component: 2600 - total flux cleaned = 0.00119775 Jy ! Component: 2650 - total flux cleaned = 0.00121174 Jy ! Component: 2700 - total flux cleaned = 0.00125369 Jy ! Component: 2750 - total flux cleaned = 0.00130937 Jy ! Component: 2800 - total flux cleaned = 0.00132318 Jy ! Component: 2850 - total flux cleaned = 0.00132318 Jy ! Component: 2900 - total flux cleaned = 0.00133694 Jy ! Component: 2950 - total flux cleaned = 0.00135061 Jy ! Component: 3000 - total flux cleaned = 0.00137768 Jy ! Component: 3050 - total flux cleaned = 0.00136409 Jy ! Component: 3100 - total flux cleaned = 0.0013641 Jy ! Component: 3150 - total flux cleaned = 0.00140435 Jy ! Component: 3200 - total flux cleaned = 0.00140426 Jy ! Component: 3250 - total flux cleaned = 0.00139094 Jy ! Component: 3300 - total flux cleaned = 0.00141748 Jy ! Component: 3350 - total flux cleaned = 0.0014571 Jy ! Component: 3400 - total flux cleaned = 0.00149647 Jy ! Component: 3450 - total flux cleaned = 0.00147028 Jy ! Component: 3500 - total flux cleaned = 0.00148324 Jy ! Component: 3550 - total flux cleaned = 0.0014703 Jy ! Component: 3600 - total flux cleaned = 0.00145743 Jy ! Component: 3650 - total flux cleaned = 0.00147025 Jy ! Component: 3700 - total flux cleaned = 0.00149584 Jy ! Component: 3750 - total flux cleaned = 0.00147041 Jy ! Component: 3800 - total flux cleaned = 0.0014705 Jy ! Component: 3850 - total flux cleaned = 0.00147044 Jy ! Component: 3900 - total flux cleaned = 0.00150815 Jy ! Component: 3950 - total flux cleaned = 0.0015332 Jy ! Component: 4000 - total flux cleaned = 0.00149575 Jy ! Component: 4050 - total flux cleaned = 0.00145847 Jy ! Total flux subtracted in 4096 components = 0.00144603 Jy ! Clean residual min=-0.000800 max=0.000872 Jy/beam ! Clean residual mean=-0.000001 rms=0.000214 Jy/beam ! Combined flux in latest and established models = 0.337137 Jy keep ! Adding 341 model components to the UV plane model. ! The established model now contains 491 components and 0.337137 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uvm//J1500+4751_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.908 x 1.49 at -14.93 degrees (North through East) ! Clean map min=-0.0012833 max=0.19218 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uvm//J1500+4751_X_a_map.fits wmodel /image_prod/ug002_uvm//J1500+4751_X_a_map.mod ! Writing 491 model components to file: /image_prod/ug002_uvm//J1500+4751_X_a_map.mod wobs /image_prod/ug002_uvm//J1500+4751_X_a_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uvm//J1500+4751_X_a_uvs.fits wwins /image_prod/ug002_uvm//J1500+4751_X_a_map.win ! wwins: Wrote 9 windows to /image_prod/ug002_uvm//J1500+4751_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.192175 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000213135 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.33272 0.33272 0.665439 1.33088 2.66176 5.32351 10.647 21.2941 42.5881 85.1762 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.192 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 901.66 quit ! Quitting program ! Log file /image_prod/ug002_uvm//J1500+4751_X_a_dfm.log closed on Wed Mar 4 17:21:09 2020