! Started logfile: /image_prod/ug002_uvm//J1434+1952_X_a_dfm.log on Wed Mar 4 17:20:20 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uvm//J1434+1952_X_a_uvm.fits ! Reading UV FITS file: /image_prod/ug002_uvm//J1434+1952_X_a_uvm.fits ! AN table 1: 48 integrations on 36 of 36 possible baselines. ! AN table 2: 12 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.835097 visibilities/baseline/integration-bin. ! Found source: J1434+1952 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 121 lines of history. ! ! Reading 22728 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1434+1952_X_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 42 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 42 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 42 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 42 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 42 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 42 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 42 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 42 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 9. ! A total of 42 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 10. ! A total of 42 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 11. ! A total of 42 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 12. ! A total of 42 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.029812Jy sigma=9.627798 ! Fit after self-cal, rms=0.782278Jy sigma=7.306147 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7163 mas, bmaj=1.814 mas, bpa=-14.62 degrees ! Estimated noise=0.789445 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.165143 Jy ! Component: 100 - total flux cleaned = 0.202936 Jy ! Total flux subtracted in 100 components = 0.202936 Jy ! Clean residual min=-0.006322 max=0.014074 Jy/beam ! Clean residual mean=0.000002 rms=0.001267 Jy/beam ! Combined flux in latest and established models = 0.202936 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.202936 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073600Jy sigma=0.657680 ! Fit after self-cal, rms=0.073590Jy sigma=0.657553 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0148616 Jy ! Component: 100 - total flux cleaned = 0.0224303 Jy ! Total flux subtracted in 100 components = 0.0224303 Jy ! Clean residual min=-0.005884 max=0.010010 Jy/beam ! Clean residual mean=0.000001 rms=0.001120 Jy/beam ! Combined flux in latest and established models = 0.225366 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.225366 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069159Jy sigma=0.612572 ! Fit after self-cal, rms=0.069149Jy sigma=0.612441 ! Inverting map ! Added new window around map position (-1.4, -1.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00946735 Jy ! Component: 100 - total flux cleaned = 0.0156101 Jy ! Total flux subtracted in 100 components = 0.0156101 Jy ! Clean residual min=-0.005197 max=0.006813 Jy/beam ! Clean residual mean=0.000001 rms=0.001039 Jy/beam ! Combined flux in latest and established models = 0.240976 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 22 components and 0.240976 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066983Jy sigma=0.589900 ! Fit after self-cal, rms=0.066876Jy sigma=0.588776 ! Inverting map ! Added new window around map position (2.4, 2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00669059 Jy ! Component: 100 - total flux cleaned = 0.00945585 Jy ! Total flux subtracted in 100 components = 0.00945585 Jy ! Clean residual min=-0.005055 max=0.005833 Jy/beam ! Clean residual mean=0.000001 rms=0.000991 Jy/beam ! Combined flux in latest and established models = 0.250432 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 29 components and 0.250432 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065838Jy sigma=0.578741 ! Fit after self-cal, rms=0.065814Jy sigma=0.578542 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9602 mas, bmaj=2.233 mas, bpa=-14.81 degrees ! Estimated noise=0.51163 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2.2, -1.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00777777 Jy ! Component: 100 - total flux cleaned = 0.0129514 Jy ! Component: 150 - total flux cleaned = 0.0160223 Jy ! Component: 200 - total flux cleaned = 0.0182156 Jy ! Total flux subtracted in 200 components = 0.0182156 Jy ! Clean residual min=-0.004449 max=0.005434 Jy/beam ! Clean residual mean=0.000003 rms=0.000994 Jy/beam ! Combined flux in latest and established models = 0.268648 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 55 components and 0.268648 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064632Jy sigma=0.567177 ! Fit after self-cal, rms=0.064607Jy sigma=0.566966 ! Inverting map ! Added new window around map position (-18.8, 17.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00485813 Jy ! Component: 100 - total flux cleaned = 0.00587626 Jy ! Component: 150 - total flux cleaned = 0.00656483 Jy ! Component: 200 - total flux cleaned = 0.00700845 Jy ! Total flux subtracted in 200 components = 0.00700845 Jy ! Clean residual min=-0.004290 max=0.004610 Jy/beam ! Clean residual mean=0.000004 rms=0.000952 Jy/beam ! Combined flux in latest and established models = 0.275656 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 72 components and 0.275656 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064126Jy sigma=0.562362 ! Fit after self-cal, rms=0.064093Jy sigma=0.561992 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9602 x 2.233 at -14.81 degrees (North through East) ! Clean map min=-0.0041172 max=0.21424 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.02 HN 1.01 KP 1.09 ! LA 1.04 MK 1.04 NL 1.15 OV 0.95 ! PT 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.88 FD 0.96 HN 0.93 KP 0.99 ! LA 0.97 MK 0.97 NL 0.93 OV 0.95 ! PT 0.87 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.05 HN 1.03 KP 1.09 ! LA 1.02 MK 1.06 NL 1.13 OV 0.94 ! PT 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.88 FD 0.97 HN 0.94 KP 1.02 ! LA 0.94 MK 0.95 NL 0.95 OV 0.96 ! PT 0.87 SC 0.95 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.03 HN 1.01 KP 1.10 ! LA 1.04 MK 1.04 NL 1.13 OV 0.93 ! PT 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.89 FD 0.95 HN 0.92 KP 1.00 ! LA 0.92 MK 0.92 NL 0.92 OV 0.95 ! PT 0.85 SC 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.02 HN 1.05 KP 1.10 ! LA 1.04 MK 1.05 NL 1.15 OV 0.93 ! PT 0.95 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.90 FD 0.94 HN 0.97 KP 0.98 ! LA 0.95 MK 0.96 NL 0.93 OV 0.98 ! PT 0.86 SC 0.95 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.03 HN 1.04 KP 1.10 ! LA 1.04 MK 1.05 NL 1.14 OV 0.93 ! PT 0.91 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.92 FD 0.93 HN 0.92 KP 1.01 ! LA 0.94 MK 0.95 NL 0.94 OV 0.96 ! PT 0.84 SC 0.97 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.03 HN 1.02 KP 1.10 ! LA 1.03 MK 1.04 NL 1.14 OV 0.92 ! PT 0.92 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.89 FD 0.97 HN 0.99 KP 1.00 ! LA 0.94 MK 0.93 NL 0.93 OV 0.95 ! PT 0.86 SC 0.96 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.03 HN 1.05 KP 1.10 ! LA 1.03 MK 1.02 NL 1.11 OV 0.93 ! PT 0.93 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.88 FD 0.93 HN 0.93 KP 1.01 ! LA 0.96 MK 0.98 NL 0.94 OV 0.95 ! PT 0.86 SC 0.98 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.04 HN 1.01 KP 1.08 ! LA 1.03 MK 1.01 NL 1.15 OV 0.92 ! PT 0.93 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.91 FD 0.92 HN 0.94 KP 1.01 ! LA 0.91 MK 0.94 NL 0.95 OV 0.95 ! PT 0.85 SC 0.96 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.04 HN 1.02 KP 1.07 ! LA 1.04 MK 1.02 NL 1.13 OV 0.91 ! PT 0.93 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.86 FD 0.92 HN 0.92 KP 0.99 ! LA 0.98 MK 0.98 NL 0.90 OV 0.98 ! PT 0.81 SC 0.95 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.03 HN 0.99 KP 1.10 ! LA 1.02 MK 1.00 NL 1.14 OV 0.92 ! PT 0.92 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.88 FD 0.93 HN 0.97 KP 0.98 ! LA 0.93 MK 0.96 NL 0.89 OV 0.97 ! PT 0.85 SC 0.99 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.03 HN 0.99 KP 1.08 ! LA 1.05 MK 1.01 NL 1.14 OV 0.93 ! PT 0.92 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.90 FD 0.93 HN 0.90 KP 1.01 ! LA 0.93 MK 0.96 NL 0.93 OV 0.98 ! PT 0.83 SC 0.98 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.03 HN 1.07 KP 1.07 ! LA 1.03 MK 1.01 NL 1.11 OV 0.93 ! PT 0.92 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.89 FD 0.95 HN 0.94 KP 0.97 ! LA 0.95 MK 0.99 NL 0.90 OV 0.94 ! PT 0.84 SC 0.95 ! ! ! Fit before self-cal, rms=0.064093Jy sigma=0.561992 ! Fit after self-cal, rms=0.059262Jy sigma=0.510898 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9635 mas, bmaj=2.202 mas, bpa=-13.91 degrees ! Estimated noise=0.510753 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00210355 Jy ! Component: 100 - total flux cleaned = -0.00319617 Jy ! Component: 150 - total flux cleaned = -0.00396925 Jy ! Component: 200 - total flux cleaned = -0.00427083 Jy ! Total flux subtracted in 200 components = -0.00427083 Jy ! Clean residual min=-0.002888 max=0.002378 Jy/beam ! Clean residual mean=0.000003 rms=0.000521 Jy/beam ! Combined flux in latest and established models = 0.271386 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 100 components and 0.271386 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058980Jy sigma=0.508149 ! Fit after self-cal, rms=0.059001Jy sigma=0.507977 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059001Jy sigma=0.507977 ! Fit after self-cal, rms=0.058131Jy sigma=0.486329 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.963 mas, bmaj=2.2 mas, bpa=-14.12 degrees ! Estimated noise=0.510861 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00186655 Jy ! Component: 100 - total flux cleaned = -0.00285449 Jy ! Component: 150 - total flux cleaned = -0.00322515 Jy ! Component: 200 - total flux cleaned = -0.00349758 Jy ! Total flux subtracted in 200 components = -0.00349758 Jy ! Clean residual min=-0.001735 max=0.001565 Jy/beam ! Clean residual mean=0.000000 rms=0.000319 Jy/beam ! Combined flux in latest and established models = 0.267888 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 115 components and 0.267888 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058005Jy sigma=0.485094 ! Fit after self-cal, rms=0.058033Jy sigma=0.485001 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000260634 Jy ! Component: 100 - total flux cleaned = -0.000452789 Jy ! Component: 150 - total flux cleaned = -0.000628523 Jy ! Component: 200 - total flux cleaned = -0.000790996 Jy ! Total flux subtracted in 200 components = -0.000790996 Jy ! Clean residual min=-0.001667 max=0.001641 Jy/beam ! Clean residual mean=0.000000 rms=0.000310 Jy/beam ! Combined flux in latest and established models = 0.267097 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 127 components and 0.267097 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057988Jy sigma=0.484584 ! Fit after self-cal, rms=0.057987Jy sigma=0.484567 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057987Jy sigma=0.484567 ! Fit after self-cal, rms=0.058077Jy sigma=0.484172 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9632 mas, bmaj=2.2 mas, bpa=-14.08 degrees ! Estimated noise=0.510759 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00153241 Jy ! Component: 100 - total flux cleaned = -0.00224904 Jy ! Component: 150 - total flux cleaned = -0.00239583 Jy ! Component: 200 - total flux cleaned = -0.00252751 Jy ! Total flux subtracted in 200 components = -0.00252751 Jy ! Clean residual min=-0.001481 max=0.001385 Jy/beam ! Clean residual mean=-0.000000 rms=0.000289 Jy/beam ! Combined flux in latest and established models = 0.264569 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 130 components and 0.264569 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058015Jy sigma=0.483572 ! Fit after self-cal, rms=0.058016Jy sigma=0.483561 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.99429e-05 Jy ! Component: 100 - total flux cleaned = -0.000145282 Jy ! Component: 150 - total flux cleaned = -0.000249964 Jy ! Component: 200 - total flux cleaned = -0.00032298 Jy ! Total flux subtracted in 200 components = -0.00032298 Jy ! Clean residual min=-0.001460 max=0.001359 Jy/beam ! Clean residual mean=-0.000000 rms=0.000284 Jy/beam ! Combined flux in latest and established models = 0.264246 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 139 components and 0.264246 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057992Jy sigma=0.483339 ! Fit after self-cal, rms=0.057992Jy sigma=0.483331 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057992Jy sigma=0.483331 ! Fit after self-cal, rms=0.058048Jy sigma=0.483127 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.216 mas, bmaj=2.968 mas, bpa=-12.09 degrees ! Estimated noise=0.620064 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00110422 Jy ! Component: 100 - total flux cleaned = -0.00135656 Jy ! Component: 150 - total flux cleaned = -0.00147152 Jy ! Component: 200 - total flux cleaned = -0.00154711 Jy ! Total flux subtracted in 200 components = -0.00154711 Jy ! Clean residual min=-0.001372 max=0.001253 Jy/beam ! Clean residual mean=-0.000000 rms=0.000324 Jy/beam ! Combined flux in latest and established models = 0.262699 Jy selfcal ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 171 components and 0.262699 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058027Jy sigma=0.482909 ! Fit after self-cal, rms=0.058027Jy sigma=0.482893 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000107298 Jy ! Component: 100 - total flux cleaned = -0.000150211 Jy ! Component: 150 - total flux cleaned = -0.000225274 Jy ! Component: 200 - total flux cleaned = -0.000225621 Jy ! Total flux subtracted in 200 components = -0.000225621 Jy ! Clean residual min=-0.001336 max=0.001232 Jy/beam ! Clean residual mean=-0.000000 rms=0.000316 Jy/beam ! Combined flux in latest and established models = 0.262474 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 183 components and 0.262474 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058020Jy sigma=0.482835 ! Fit after self-cal, rms=0.058019Jy sigma=0.482827 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9632 mas, bmaj=2.199 mas, bpa=-14.05 degrees ! Estimated noise=0.510718 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9632 x 2.199 at -14.05 degrees (North through East) ! Clean map min=-0.001166 max=0.21407 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.715 mas, bmaj=1.777 mas, bpa=-13.8 degrees ! Estimated noise=0.786699 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.164446 Jy ! Component: 100 - total flux cleaned = 0.201992 Jy ! Component: 150 - total flux cleaned = 0.216413 Jy ! Component: 200 - total flux cleaned = 0.224905 Jy ! Total flux subtracted in 200 components = 0.224905 Jy ! Clean residual min=-0.002553 max=0.004666 Jy/beam ! Clean residual mean=-0.000000 rms=0.000578 Jy/beam ! Combined flux in latest and established models = 0.224905 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.224905 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9632 mas, bmaj=2.199 mas, bpa=-14.05 degrees ! Estimated noise=0.510718 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0109549 Jy ! Component: 100 - total flux cleaned = 0.0172178 Jy ! Component: 150 - total flux cleaned = 0.0214925 Jy ! Component: 200 - total flux cleaned = 0.0248073 Jy ! Total flux subtracted in 200 components = 0.0248073 Jy ! Clean residual min=-0.001398 max=0.002049 Jy/beam ! Clean residual mean=-0.000001 rms=0.000375 Jy/beam ! Combined flux in latest and established models = 0.249713 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 58 components and 0.249713 Jy ! Inverting map ! Added new window around map position (1.6, 0.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00266401 Jy ! Component: 100 - total flux cleaned = 0.00484091 Jy ! Component: 150 - total flux cleaned = 0.00665306 Jy ! Component: 200 - total flux cleaned = 0.0081181 Jy ! Total flux subtracted in 200 components = 0.0081181 Jy ! Clean residual min=-0.001266 max=0.001431 Jy/beam ! Clean residual mean=-0.000001 rms=0.000295 Jy/beam ! Combined flux in latest and established models = 0.257831 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 86 components and 0.257831 Jy ! Inverting map ! Added new window around map position (-6.8, -4.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0011448 Jy ! Component: 100 - total flux cleaned = 0.00177529 Jy ! Component: 150 - total flux cleaned = 0.00221514 Jy ! Component: 200 - total flux cleaned = 0.00257965 Jy ! Total flux subtracted in 200 components = 0.00257965 Jy ! Clean residual min=-0.001124 max=0.001343 Jy/beam ! Clean residual mean=-0.000001 rms=0.000273 Jy/beam ! Combined flux in latest and established models = 0.260411 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 106 components and 0.260411 Jy ! Inverting map ! Added new window around map position (2.4, 25.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000848893 Jy ! Component: 100 - total flux cleaned = 0.00113877 Jy ! Component: 150 - total flux cleaned = 0.00134162 Jy ! Component: 200 - total flux cleaned = 0.00153349 Jy ! Total flux subtracted in 200 components = 0.00153349 Jy ! Clean residual min=-0.001111 max=0.001158 Jy/beam ! Clean residual mean=-0.000001 rms=0.000263 Jy/beam ! Combined flux in latest and established models = 0.261944 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 123 components and 0.261944 Jy ! Inverting map ! Added new window around map position (-11, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00092076 Jy ! Component: 100 - total flux cleaned = 0.00121933 Jy ! Component: 150 - total flux cleaned = 0.00138867 Jy ! Component: 200 - total flux cleaned = 0.00157616 Jy ! Total flux subtracted in 200 components = 0.00157616 Jy ! Clean residual min=-0.001055 max=0.001057 Jy/beam ! Clean residual mean=-0.000001 rms=0.000255 Jy/beam ! Combined flux in latest and established models = 0.26352 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 144 components and 0.26352 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.216 mas, bmaj=2.968 mas, bpa=-12.09 degrees ! Estimated noise=0.620064 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00062491 Jy ! Component: 100 - total flux cleaned = 0.000945567 Jy ! Component: 150 - total flux cleaned = 0.00112978 Jy ! Component: 200 - total flux cleaned = 0.00125286 Jy ! Total flux subtracted in 200 components = 0.00125286 Jy ! Clean residual min=-0.001126 max=0.000987 Jy/beam ! Clean residual mean=-0.000001 rms=0.000287 Jy/beam ! Combined flux in latest and established models = 0.264773 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000113101 Jy ! Component: 100 - total flux cleaned = 0.000201207 Jy ! Component: 150 - total flux cleaned = 0.0002984 Jy ! Component: 200 - total flux cleaned = 0.000343705 Jy ! Total flux subtracted in 200 components = 0.000343705 Jy ! Clean residual min=-0.001092 max=0.000981 Jy/beam ! Clean residual mean=-0.000001 rms=0.000284 Jy/beam ! Combined flux in latest and established models = 0.265117 Jy ! Adding 58 model components to the UV plane model. ! The established model now contains 191 components and 0.265117 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9632 mas, bmaj=2.199 mas, bpa=-14.05 degrees ! Estimated noise=0.510718 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000400289 Jy ! Component: 100 - total flux cleaned = -0.000376655 Jy ! Component: 150 - total flux cleaned = -0.000311239 Jy ! Component: 200 - total flux cleaned = -0.000352666 Jy ! Total flux subtracted in 200 components = -0.000352666 Jy ! Clean residual min=-0.001038 max=0.001054 Jy/beam ! Clean residual mean=-0.000001 rms=0.000247 Jy/beam ! Combined flux in latest and established models = 0.264764 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 206 components and 0.264764 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057921Jy sigma=0.482054 ! Fit after self-cal, rms=0.057911Jy sigma=0.481923 wmodel J1434+1952_X_a_map.mod ! Writing 206 model components to file: J1434+1952_X_a_map.mod wobs J1434+1952_X_a_uvs.fits ! Writing UV FITS file: J1434+1952_X_a_uvs.fits wwins J1434+1952_X_a_map.win ! wwins: Wrote 9 windows to J1434+1952_X_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 7.60466e-05 Jy ! Component: 100 - total flux cleaned = 7.70463e-05 Jy ! Component: 150 - total flux cleaned = -4.55527e-05 Jy ! Component: 200 - total flux cleaned = -0.00014697 Jy ! Component: 250 - total flux cleaned = -0.000179934 Jy ! Component: 300 - total flux cleaned = -0.000212191 Jy ! Component: 350 - total flux cleaned = -0.000227989 Jy ! Component: 400 - total flux cleaned = -0.000243393 Jy ! Component: 450 - total flux cleaned = -0.000273807 Jy ! Component: 500 - total flux cleaned = -0.000273868 Jy ! Component: 550 - total flux cleaned = -0.000288823 Jy ! Component: 600 - total flux cleaned = -0.000391475 Jy ! Component: 650 - total flux cleaned = -0.000376733 Jy ! Component: 700 - total flux cleaned = -0.000434496 Jy ! Component: 750 - total flux cleaned = -0.00046306 Jy ! Component: 800 - total flux cleaned = -0.000547883 Jy ! Component: 850 - total flux cleaned = -0.000575957 Jy ! Component: 900 - total flux cleaned = -0.000659461 Jy ! Component: 950 - total flux cleaned = -0.000755906 Jy ! Component: 1000 - total flux cleaned = -0.000837851 Jy ! Component: 1050 - total flux cleaned = -0.00089208 Jy ! Component: 1100 - total flux cleaned = -0.000999728 Jy ! Component: 1150 - total flux cleaned = -0.00106649 Jy ! Component: 1200 - total flux cleaned = -0.00107978 Jy ! Component: 1250 - total flux cleaned = -0.00117214 Jy ! Component: 1300 - total flux cleaned = -0.00122455 Jy ! Component: 1350 - total flux cleaned = -0.00128967 Jy ! Component: 1400 - total flux cleaned = -0.0013156 Jy ! Component: 1450 - total flux cleaned = -0.00137991 Jy ! Component: 1500 - total flux cleaned = -0.0014693 Jy ! Component: 1550 - total flux cleaned = -0.00148199 Jy ! Component: 1600 - total flux cleaned = -0.0015451 Jy ! Component: 1650 - total flux cleaned = -0.00157027 Jy ! Component: 1700 - total flux cleaned = -0.00168254 Jy ! Component: 1750 - total flux cleaned = -0.00170733 Jy ! Component: 1800 - total flux cleaned = -0.00176895 Jy ! Component: 1850 - total flux cleaned = -0.00180576 Jy ! Component: 1900 - total flux cleaned = -0.00187904 Jy ! Component: 1950 - total flux cleaned = -0.00191541 Jy ! Component: 2000 - total flux cleaned = -0.00191533 Jy ! Component: 2050 - total flux cleaned = -0.00201167 Jy ! Component: 2100 - total flux cleaned = -0.00204762 Jy ! Component: 2150 - total flux cleaned = -0.0021431 Jy ! Component: 2200 - total flux cleaned = -0.00216678 Jy ! Component: 2250 - total flux cleaned = -0.00220227 Jy ! Component: 2300 - total flux cleaned = -0.00224942 Jy ! Component: 2350 - total flux cleaned = -0.00230813 Jy ! Component: 2400 - total flux cleaned = -0.00235476 Jy ! Component: 2450 - total flux cleaned = -0.00240124 Jy ! Component: 2500 - total flux cleaned = -0.0024129 Jy ! Component: 2550 - total flux cleaned = -0.00245895 Jy ! Component: 2600 - total flux cleaned = -0.0025164 Jy ! Component: 2650 - total flux cleaned = -0.00257355 Jy ! Component: 2700 - total flux cleaned = -0.00253941 Jy ! Component: 2750 - total flux cleaned = -0.00253945 Jy ! Component: 2800 - total flux cleaned = -0.00257339 Jy ! Component: 2850 - total flux cleaned = -0.00262965 Jy ! Component: 2900 - total flux cleaned = -0.00264085 Jy ! Component: 2950 - total flux cleaned = -0.00269678 Jy ! Component: 3000 - total flux cleaned = -0.00273016 Jy ! Component: 3050 - total flux cleaned = -0.00270801 Jy ! Component: 3100 - total flux cleaned = -0.0027853 Jy ! Component: 3150 - total flux cleaned = -0.00284033 Jy ! Component: 3200 - total flux cleaned = -0.0028074 Jy ! Component: 3250 - total flux cleaned = -0.0028511 Jy ! Component: 3300 - total flux cleaned = -0.00288379 Jy ! Component: 3350 - total flux cleaned = -0.00292717 Jy ! Component: 3400 - total flux cleaned = -0.00290553 Jy ! Component: 3450 - total flux cleaned = -0.00291625 Jy ! Component: 3500 - total flux cleaned = -0.00295923 Jy ! Component: 3550 - total flux cleaned = -0.00295924 Jy ! Component: 3600 - total flux cleaned = -0.00295934 Jy ! Component: 3650 - total flux cleaned = -0.00300175 Jy ! Component: 3700 - total flux cleaned = -0.00298059 Jy ! Component: 3750 - total flux cleaned = -0.00309666 Jy ! Component: 3800 - total flux cleaned = -0.00307564 Jy ! Component: 3850 - total flux cleaned = -0.00310703 Jy ! Component: 3900 - total flux cleaned = -0.0031279 Jy ! Component: 3950 - total flux cleaned = -0.00319034 Jy ! Component: 4000 - total flux cleaned = -0.00322152 Jy ! Component: 4050 - total flux cleaned = -0.00322147 Jy ! Total flux subtracted in 4096 components = -0.00324206 Jy ! Clean residual min=-0.000689 max=0.000608 Jy/beam ! Clean residual mean=-0.000001 rms=0.000187 Jy/beam ! Combined flux in latest and established models = 0.261522 Jy keep ! Adding 340 model components to the UV plane model. ! The established model now contains 546 components and 0.261522 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uvm//J1434+1952_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9632 x 2.199 at -14.05 degrees (North through East) ! Clean map min=-0.00088329 max=0.21456 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uvm//J1434+1952_X_a_map.fits wmodel /image_prod/ug002_uvm//J1434+1952_X_a_map.mod ! Writing 546 model components to file: /image_prod/ug002_uvm//J1434+1952_X_a_map.mod wobs /image_prod/ug002_uvm//J1434+1952_X_a_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uvm//J1434+1952_X_a_uvs.fits wwins /image_prod/ug002_uvm//J1434+1952_X_a_map.win ! wwins: Wrote 10 windows to /image_prod/ug002_uvm//J1434+1952_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.214557 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00018722 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.261777 0.261777 0.523555 1.04711 2.09422 4.18844 8.37688 16.7538 33.5075 67.015 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.214 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1146.01 quit ! Quitting program ! Log file /image_prod/ug002_uvm//J1434+1952_X_a_dfm.log closed on Wed Mar 4 17:20:26 2020