! Started logfile: /image_prod/ug002_uvm//J1410+6216_X_a_dfm.log on Wed Mar 4 17:17:37 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uvm//J1410+6216_X_a_uvm.fits ! Reading UV FITS file: /image_prod/ug002_uvm//J1410+6216_X_a_uvm.fits ! AN table 1: 200 integrations on 45 of 45 possible baselines. ! AN table 2: 40 integrations on 28 of 28 possible baselines. ! AN table 3: 20 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.9147 visibilities/baseline/integration-bin. ! Found source: J1410+6216 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 117228 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1410+6216_X_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 100 telescope corrections were flagged in sub-array 1. ! A total of 21 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 100 telescope corrections were flagged in sub-array 1. ! A total of 21 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 100 telescope corrections were flagged in sub-array 1. ! A total of 21 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 100 telescope corrections were flagged in sub-array 1. ! A total of 21 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 5. ! A total of 100 telescope corrections were flagged in sub-array 1. ! A total of 21 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 6. ! A total of 100 telescope corrections were flagged in sub-array 1. ! A total of 21 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 7. ! A total of 100 telescope corrections were flagged in sub-array 1. ! A total of 21 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 8. ! A total of 100 telescope corrections were flagged in sub-array 1. ! A total of 21 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 9. ! A total of 100 telescope corrections were flagged in sub-array 1. ! A total of 21 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 10. ! A total of 100 telescope corrections were flagged in sub-array 1. ! A total of 21 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 11. ! A total of 100 telescope corrections were flagged in sub-array 1. ! A total of 21 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 12. ! A total of 100 telescope corrections were flagged in sub-array 1. ! A total of 21 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=1.003711Jy sigma=9.199550 ! Fit after self-cal, rms=0.935884Jy sigma=8.571480 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7807 mas, bmaj=1.006 mas, bpa=5.633 degrees ! Estimated noise=0.552934 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0455715 Jy ! Component: 100 - total flux cleaned = 0.0620396 Jy ! Total flux subtracted in 100 components = 0.0620396 Jy ! Clean residual min=-0.003157 max=0.011917 Jy/beam ! Clean residual mean=-0.000001 rms=0.000662 Jy/beam ! Combined flux in latest and established models = 0.0620396 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.0620396 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061102Jy sigma=0.520229 ! Fit after self-cal, rms=0.060386Jy sigma=0.514071 ! Inverting map ! Added new window around map position (-1, -0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.01215 Jy ! Component: 100 - total flux cleaned = 0.018021 Jy ! Total flux subtracted in 100 components = 0.018021 Jy ! Clean residual min=-0.002635 max=0.003753 Jy/beam ! Clean residual mean=0.000002 rms=0.000478 Jy/beam ! Combined flux in latest and established models = 0.0800606 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 8 components and 0.0800606 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057768Jy sigma=0.488379 ! Fit after self-cal, rms=0.057539Jy sigma=0.486492 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00458571 Jy ! Component: 100 - total flux cleaned = 0.00569725 Jy ! Total flux subtracted in 100 components = 0.00569725 Jy ! Clean residual min=-0.002217 max=0.002856 Jy/beam ! Clean residual mean=0.000003 rms=0.000445 Jy/beam ! Combined flux in latest and established models = 0.0857579 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 12 components and 0.0857579 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057261Jy sigma=0.484114 ! Fit after self-cal, rms=0.057215Jy sigma=0.483747 ! Inverting map ! Added new window around map position (1.8, 1.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00276332 Jy ! Component: 100 - total flux cleaned = 0.00283127 Jy ! Total flux subtracted in 100 components = 0.00283127 Jy ! Clean residual min=-0.001921 max=0.002033 Jy/beam ! Clean residual mean=0.000003 rms=0.000430 Jy/beam ! Combined flux in latest and established models = 0.0885892 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 20 components and 0.0885892 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057143Jy sigma=0.483171 ! Fit after self-cal, rms=0.057128Jy sigma=0.483069 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.059 mas, bmaj=1.329 mas, bpa=10.14 degrees ! Estimated noise=0.230514 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000631402 Jy ! Component: 100 - total flux cleaned = -0.000725694 Jy ! Component: 150 - total flux cleaned = -0.000778005 Jy ! Component: 200 - total flux cleaned = -0.00084777 Jy ! Total flux subtracted in 200 components = -0.00084777 Jy ! Clean residual min=-0.002000 max=0.002454 Jy/beam ! Clean residual mean=0.000013 rms=0.000487 Jy/beam ! Combined flux in latest and established models = 0.0877414 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 28 components and 0.0877414 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057098Jy sigma=0.482773 ! Fit after self-cal, rms=0.057091Jy sigma=0.482752 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.059 x 1.329 at 10.14 degrees (North through East) ! Clean map min=-0.0019545 max=0.061472 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.92 HN 1.01 KP 1.04 ! LA 1.07 MK 0.99 NL 1.21 OV 0.95 ! PT 1.04 SC 0.89 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 0.96 HN 0.96 KP 0.99 ! NL 0.93 OV 1.01 PT 0.94 SC 0.90 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.96 FD 0.99 HN 1.02 KP 0.94 ! LA 1.00* NL 0.93 OV 0.98 PT 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.90 HN 1.01 KP 1.05 ! LA 1.07 MK 0.98 NL 1.19 OV 0.94 ! PT 1.06 SC 0.88 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 FD 0.95 HN 1.00 KP 1.01 ! NL 0.93 OV 1.05 PT 0.96 SC 1.01 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.88 FD 0.96 HN 0.98 KP 0.92 ! LA 1.00* NL 0.95 OV 0.97 PT 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.90 HN 0.96 KP 1.03 ! LA 1.09 MK 0.98 NL 1.19 OV 0.94 ! PT 1.06 SC 0.91 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.05 FD 0.96 HN 0.95 KP 0.96 ! NL 0.94 OV 1.05 PT 0.96 SC 1.01 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.93 FD 0.96 HN 0.94 KP 0.95 ! LA 1.00* NL 0.93 OV 0.96 PT 1.07 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.93 HN 1.00 KP 1.05 ! LA 1.06 MK 1.00 NL 1.19 OV 0.95 ! PT 1.03 SC 0.87 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 0.94 HN 0.97 KP 0.99 ! NL 0.92 OV 1.00 PT 0.94 SC 1.02 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 0.98 HN 0.97 KP 0.89 ! LA 1.00* NL 0.93 OV 0.92 PT 0.95 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.93 HN 1.02 KP 1.06 ! LA 1.07 MK 1.00 NL 1.17 OV 0.94 ! PT 1.03 SC 0.91 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 1.05 HN 0.96 KP 1.01 ! NL 0.96 OV 1.00 PT 0.91 SC 1.00 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.91 FD 0.99 HN 0.94 KP 0.91 ! LA 1.00* NL 0.93 OV 1.00 PT 0.90 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.91 HN 1.01 KP 1.07 ! LA 1.07 MK 0.99 NL 1.20 OV 0.95 ! PT 1.03 SC 0.85 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 0.98 HN 0.97 KP 0.99 ! NL 0.95 OV 0.98 PT 1.00 SC 0.91 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.94 FD 0.95 HN 0.96 KP 0.96 ! LA 1.00* NL 0.88 OV 0.98 PT 0.92 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.92 HN 0.99 KP 1.03 ! LA 1.08 MK 0.98 NL 1.17 OV 0.95 ! PT 1.02 SC 0.95 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 0.96 HN 0.92 KP 0.97 ! NL 0.94 OV 0.98 PT 0.95 SC 0.95 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.92 FD 0.93 HN 0.96 KP 1.00 ! LA 1.00* NL 0.88 OV 0.93 PT 1.04 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.91 HN 1.02 KP 1.05 ! LA 1.04 MK 0.97 NL 1.19 OV 0.93 ! PT 1.06 SC 0.88 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 FD 1.00 HN 1.00 KP 1.02 ! NL 0.95 OV 0.99 PT 0.99 SC 0.97 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.95 FD 1.04 HN 0.89 KP 0.95 ! LA 1.00* NL 0.90 OV 0.98 PT 1.03 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.89 HN 0.98 KP 1.04 ! LA 1.08 MK 1.04 NL 1.20 OV 0.93 ! PT 1.03 SC 0.88 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 0.95 HN 0.98 KP 0.99 ! NL 0.94 OV 1.03 PT 0.95 SC 0.92 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.87 FD 0.99 HN 0.95 KP 0.98 ! LA 1.00* NL 0.87 OV 0.94 PT 1.09 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.91 HN 1.04 KP 1.01 ! LA 1.08 MK 1.01 NL 1.18 OV 0.94 ! PT 1.01 SC 0.89 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.07 FD 0.96 HN 0.95 KP 0.99 ! NL 0.93 OV 1.00 PT 0.97 SC 0.91 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.93 FD 0.99 HN 0.95 KP 1.05 ! LA 1.00* NL 0.88 OV 0.89 PT 1.02 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.87 HN 1.00 KP 1.04 ! LA 1.07 MK 0.93 NL 1.19 OV 0.94 ! PT 1.05 SC 0.92 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 0.94 HN 1.02 KP 1.00 ! NL 0.93 OV 0.95 PT 0.96 SC 1.00 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.95 FD 0.99 HN 0.98 KP 1.03 ! LA 1.00* NL 0.92 OV 0.94 PT 0.95 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.93 HN 0.98 KP 1.01 ! LA 1.08 MK 0.93 NL 1.21 OV 0.91 ! PT 1.07 SC 0.83 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.04 FD 0.98 HN 0.90 KP 0.95 ! NL 0.94 OV 0.99 PT 0.93 SC 1.07 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.95 FD 0.99 HN 1.07 KP 0.96 ! LA 1.00* NL 0.92 OV 0.89 PT 0.98 ! ! ! Fit before self-cal, rms=0.057091Jy sigma=0.482752 ! Fit after self-cal, rms=0.054845Jy sigma=0.477588 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.039 mas, bmaj=1.311 mas, bpa=11.59 degrees ! Estimated noise=0.228514 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000517875 Jy ! Component: 100 - total flux cleaned = 0.000551696 Jy ! Component: 150 - total flux cleaned = 0.000576861 Jy ! Component: 200 - total flux cleaned = 0.000576675 Jy ! Total flux subtracted in 200 components = 0.000576675 Jy ! Clean residual min=-0.001421 max=0.001530 Jy/beam ! Clean residual mean=0.000010 rms=0.000374 Jy/beam ! Combined flux in latest and established models = 0.0883181 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 42 components and 0.0883181 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054813Jy sigma=0.477316 ! Fit after self-cal, rms=0.054825Jy sigma=0.477134 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054825Jy sigma=0.477134 ! Fit after self-cal, rms=0.055997Jy sigma=0.471785 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.02 mas, bmaj=1.323 mas, bpa=11.61 degrees ! Estimated noise=0.226758 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000150878 Jy ! Component: 100 - total flux cleaned = 0.000171595 Jy ! Component: 150 - total flux cleaned = 0.000188913 Jy ! Component: 200 - total flux cleaned = 0.000205214 Jy ! Total flux subtracted in 200 components = 0.000205214 Jy ! Clean residual min=-0.000651 max=0.001032 Jy/beam ! Clean residual mean=-0.000001 rms=0.000160 Jy/beam ! Combined flux in latest and established models = 0.0885233 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 48 components and 0.0885233 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055980Jy sigma=0.471634 ! Fit after self-cal, rms=0.056057Jy sigma=0.471456 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (23.8, -5.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000971996 Jy ! Component: 100 - total flux cleaned = 0.00134766 Jy ! Component: 150 - total flux cleaned = 0.00146617 Jy ! Component: 200 - total flux cleaned = 0.00155308 Jy ! Total flux subtracted in 200 components = 0.00155308 Jy ! Clean residual min=-0.000627 max=0.000943 Jy/beam ! Clean residual mean=-0.000001 rms=0.000150 Jy/beam ! Combined flux in latest and established models = 0.0900763 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 59 components and 0.0900763 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056037Jy sigma=0.471272 ! Fit after self-cal, rms=0.056034Jy sigma=0.471255 ! Inverting map ! Added new window around map position (8, -3.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000848367 Jy ! Component: 100 - total flux cleaned = 0.00134708 Jy ! Component: 150 - total flux cleaned = 0.00168878 Jy ! Component: 200 - total flux cleaned = 0.0018753 Jy ! Total flux subtracted in 200 components = 0.0018753 Jy ! Clean residual min=-0.000581 max=0.000825 Jy/beam ! Clean residual mean=-0.000001 rms=0.000139 Jy/beam ! Combined flux in latest and established models = 0.0919516 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 77 components and 0.0919516 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056019Jy sigma=0.471096 ! Fit after self-cal, rms=0.056016Jy sigma=0.471085 ! Inverting map ! Added new window around map position (1.4, -0.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000591388 Jy ! Component: 100 - total flux cleaned = 0.000720429 Jy ! Component: 150 - total flux cleaned = 0.000865447 Jy ! Component: 200 - total flux cleaned = 0.0010235 Jy ! Total flux subtracted in 200 components = 0.0010235 Jy ! Clean residual min=-0.000564 max=0.000687 Jy/beam ! Clean residual mean=-0.000000 rms=0.000133 Jy/beam ! Combined flux in latest and established models = 0.0929751 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 86 components and 0.0929751 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056005Jy sigma=0.470968 ! Fit after self-cal, rms=0.056004Jy sigma=0.470954 ! Inverting map ! Added new window around map position (26.2, -4.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000655634 Jy ! Component: 100 - total flux cleaned = 0.000968734 Jy ! Component: 150 - total flux cleaned = 0.00117907 Jy ! Component: 200 - total flux cleaned = 0.0013314 Jy ! Total flux subtracted in 200 components = 0.0013314 Jy ! Clean residual min=-0.000567 max=0.000634 Jy/beam ! Clean residual mean=-0.000000 rms=0.000127 Jy/beam ! Combined flux in latest and established models = 0.0943065 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 106 components and 0.0943065 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055994Jy sigma=0.470856 ! Fit after self-cal, rms=0.055994Jy sigma=0.470846 ! Inverting map ! Added new window around map position (29.4, -0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000577203 Jy ! Component: 100 - total flux cleaned = 0.000895557 Jy ! Component: 150 - total flux cleaned = 0.00107185 Jy ! Component: 200 - total flux cleaned = 0.00118002 Jy ! Total flux subtracted in 200 components = 0.00118002 Jy ! Clean residual min=-0.000554 max=0.000483 Jy/beam ! Clean residual mean=-0.000000 rms=0.000121 Jy/beam ! Combined flux in latest and established models = 0.0954865 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 123 components and 0.0954865 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055986Jy sigma=0.470767 ! Fit after self-cal, rms=0.055985Jy sigma=0.470763 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055985Jy sigma=0.470763 ! Fit after self-cal, rms=0.056081Jy sigma=0.470664 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.015 mas, bmaj=1.323 mas, bpa=11.6 degrees ! Estimated noise=0.22583 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00029461 Jy ! Component: 100 - total flux cleaned = 0.000439726 Jy ! Component: 150 - total flux cleaned = 0.000634504 Jy ! Component: 200 - total flux cleaned = 0.000812406 Jy ! Total flux subtracted in 200 components = 0.000812406 Jy ! Clean residual min=-0.000511 max=0.000470 Jy/beam ! Clean residual mean=-0.000000 rms=0.000112 Jy/beam ! Combined flux in latest and established models = 0.0962989 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 134 components and 0.0962989 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056074Jy sigma=0.470607 ! Fit after self-cal, rms=0.056077Jy sigma=0.470601 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000122899 Jy ! Component: 100 - total flux cleaned = 0.000248994 Jy ! Component: 150 - total flux cleaned = 0.000357975 Jy ! Component: 200 - total flux cleaned = 0.000461 Jy ! Total flux subtracted in 200 components = 0.000461 Jy ! Clean residual min=-0.000512 max=0.000465 Jy/beam ! Clean residual mean=-0.000000 rms=0.000111 Jy/beam ! Combined flux in latest and established models = 0.0967599 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 140 components and 0.09676 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056075Jy sigma=0.470574 ! Fit after self-cal, rms=0.056074Jy sigma=0.470575 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056074Jy sigma=0.470575 ! Fit after self-cal, rms=0.056050Jy sigma=0.470564 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.293 mas, bmaj=2.579 mas, bpa=42.39 degrees ! Estimated noise=0.293072 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000321506 Jy ! Component: 100 - total flux cleaned = 0.000577372 Jy ! Component: 150 - total flux cleaned = 0.000784799 Jy ! Component: 200 - total flux cleaned = 0.000929379 Jy ! Total flux subtracted in 200 components = 0.000929379 Jy ! Clean residual min=-0.000542 max=0.000596 Jy/beam ! Clean residual mean=-0.000001 rms=0.000144 Jy/beam ! Combined flux in latest and established models = 0.0976893 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 161 components and 0.0976893 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056049Jy sigma=0.470551 ! Fit after self-cal, rms=0.056048Jy sigma=0.470551 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000150846 Jy ! Component: 100 - total flux cleaned = 0.000260981 Jy ! Component: 150 - total flux cleaned = 0.000360346 Jy ! Component: 200 - total flux cleaned = 0.000451202 Jy ! Total flux subtracted in 200 components = 0.000451202 Jy ! Clean residual min=-0.000533 max=0.000581 Jy/beam ! Clean residual mean=-0.000001 rms=0.000142 Jy/beam ! Combined flux in latest and established models = 0.0981405 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 167 components and 0.0981405 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056048Jy sigma=0.470548 ! Fit after self-cal, rms=0.056048Jy sigma=0.470546 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=1.012 mas, bmaj=1.323 mas, bpa=11.58 degrees ! Estimated noise=0.225541 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.012 x 1.323 at 11.58 degrees (North through East) ! Clean map min=-0.00042708 max=0.059917 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7506 mas, bmaj=1.014 mas, bpa=7.861 degrees ! Estimated noise=0.520407 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0445854 Jy ! Component: 100 - total flux cleaned = 0.0638633 Jy ! Component: 150 - total flux cleaned = 0.0735286 Jy ! Component: 200 - total flux cleaned = 0.0789019 Jy ! Total flux subtracted in 200 components = 0.0789019 Jy ! Clean residual min=-0.001601 max=0.002678 Jy/beam ! Clean residual mean=-0.000001 rms=0.000340 Jy/beam ! Combined flux in latest and established models = 0.0789018 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0789018 Jy ! Inverting map and beam ! Estimated beam: bmin=1.012 mas, bmaj=1.323 mas, bpa=11.58 degrees ! Estimated noise=0.225541 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00493409 Jy ! Component: 100 - total flux cleaned = 0.00741438 Jy ! Component: 150 - total flux cleaned = 0.00903524 Jy ! Component: 200 - total flux cleaned = 0.0102723 Jy ! Total flux subtracted in 200 components = 0.0102723 Jy ! Clean residual min=-0.000675 max=0.000736 Jy/beam ! Clean residual mean=-0.000001 rms=0.000155 Jy/beam ! Combined flux in latest and established models = 0.0891742 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 31 components and 0.0891741 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00100597 Jy ! Component: 100 - total flux cleaned = 0.0018678 Jy ! Component: 150 - total flux cleaned = 0.00261813 Jy ! Component: 200 - total flux cleaned = 0.0032805 Jy ! Total flux subtracted in 200 components = 0.0032805 Jy ! Clean residual min=-0.000562 max=0.000510 Jy/beam ! Clean residual mean=-0.000001 rms=0.000130 Jy/beam ! Combined flux in latest and established models = 0.0924546 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 60 components and 0.0924546 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.293 mas, bmaj=2.579 mas, bpa=42.39 degrees ! Estimated noise=0.293072 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000942751 Jy ! Component: 100 - total flux cleaned = 0.00167775 Jy ! Component: 150 - total flux cleaned = 0.00228405 Jy ! Component: 200 - total flux cleaned = 0.00279943 Jy ! Total flux subtracted in 200 components = 0.00279943 Jy ! Clean residual min=-0.000567 max=0.000572 Jy/beam ! Clean residual mean=-0.000002 rms=0.000160 Jy/beam ! Combined flux in latest and established models = 0.0952541 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00044779 Jy ! Component: 100 - total flux cleaned = 0.000840351 Jy ! Component: 150 - total flux cleaned = 0.00118588 Jy ! Component: 200 - total flux cleaned = 0.00149135 Jy ! Total flux subtracted in 200 components = 0.00149135 Jy ! Clean residual min=-0.000543 max=0.000565 Jy/beam ! Clean residual mean=-0.000001 rms=0.000148 Jy/beam ! Combined flux in latest and established models = 0.0967454 Jy ! Adding 91 model components to the UV plane model. ! The established model now contains 142 components and 0.0967454 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.012 mas, bmaj=1.323 mas, bpa=11.58 degrees ! Estimated noise=0.225541 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.97431e-05 Jy ! Component: 100 - total flux cleaned = 0.000185596 Jy ! Component: 150 - total flux cleaned = 0.000342931 Jy ! Component: 200 - total flux cleaned = 0.000421082 Jy ! Total flux subtracted in 200 components = 0.000421082 Jy ! Clean residual min=-0.000471 max=0.000478 Jy/beam ! Clean residual mean=-0.000000 rms=0.000111 Jy/beam ! Combined flux in latest and established models = 0.0971665 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 160 components and 0.0971665 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056050Jy sigma=0.470571 ! Fit after self-cal, rms=0.056045Jy sigma=0.470532 wmodel J1410+6216_X_a_map.mod ! Writing 160 model components to file: J1410+6216_X_a_map.mod wobs J1410+6216_X_a_uvs.fits ! Writing UV FITS file: J1410+6216_X_a_uvs.fits wwins J1410+6216_X_a_map.win ! wwins: Wrote 8 windows to J1410+6216_X_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 1.75171e-05 Jy ! Component: 100 - total flux cleaned = 9.45045e-06 Jy ! Component: 150 - total flux cleaned = -6.84411e-05 Jy ! Component: 200 - total flux cleaned = -0.000121519 Jy ! Component: 250 - total flux cleaned = -0.000128888 Jy ! Component: 300 - total flux cleaned = -0.000150803 Jy ! Component: 350 - total flux cleaned = -0.000200896 Jy ! Component: 400 - total flux cleaned = -0.000207855 Jy ! Component: 450 - total flux cleaned = -0.000242699 Jy ! Component: 500 - total flux cleaned = -0.000283919 Jy ! Component: 550 - total flux cleaned = -0.000304284 Jy ! Component: 600 - total flux cleaned = -0.000324351 Jy ! Component: 650 - total flux cleaned = -0.00032437 Jy ! Component: 700 - total flux cleaned = -0.00034406 Jy ! Component: 750 - total flux cleaned = -0.000369966 Jy ! Component: 800 - total flux cleaned = -0.000395661 Jy ! Component: 850 - total flux cleaned = -0.000401909 Jy ! Component: 900 - total flux cleaned = -0.00040824 Jy ! Component: 950 - total flux cleaned = -0.000426905 Jy ! Component: 1000 - total flux cleaned = -0.000420709 Jy ! Component: 1050 - total flux cleaned = -0.000445274 Jy ! Component: 1100 - total flux cleaned = -0.000426935 Jy ! Component: 1150 - total flux cleaned = -0.000463216 Jy ! Component: 1200 - total flux cleaned = -0.000475158 Jy ! Component: 1250 - total flux cleaned = -0.000475227 Jy ! Component: 1300 - total flux cleaned = -0.000492916 Jy ! Component: 1350 - total flux cleaned = -0.000492932 Jy ! Component: 1400 - total flux cleaned = -0.000527837 Jy ! Component: 1450 - total flux cleaned = -0.000527849 Jy ! Component: 1500 - total flux cleaned = -0.000527843 Jy ! Component: 1550 - total flux cleaned = -0.000545005 Jy ! Component: 1600 - total flux cleaned = -0.000578992 Jy ! Component: 1650 - total flux cleaned = -0.000590158 Jy ! Component: 1700 - total flux cleaned = -0.00057341 Jy ! Component: 1750 - total flux cleaned = -0.000601179 Jy ! Component: 1800 - total flux cleaned = -0.000623225 Jy ! Component: 1850 - total flux cleaned = -0.000650595 Jy ! Component: 1900 - total flux cleaned = -0.00066145 Jy ! Component: 1950 - total flux cleaned = -0.000661467 Jy ! Component: 2000 - total flux cleaned = -0.000672266 Jy ! Component: 2050 - total flux cleaned = -0.000704349 Jy ! Component: 2100 - total flux cleaned = -0.000688367 Jy ! Component: 2150 - total flux cleaned = -0.00071484 Jy ! Component: 2200 - total flux cleaned = -0.000741219 Jy ! Component: 2250 - total flux cleaned = -0.000762123 Jy ! Component: 2300 - total flux cleaned = -0.000741285 Jy ! Component: 2350 - total flux cleaned = -0.00078272 Jy ! Component: 2400 - total flux cleaned = -0.000782717 Jy ! Component: 2450 - total flux cleaned = -0.000757135 Jy ! Component: 2500 - total flux cleaned = -0.000777524 Jy ! Component: 2550 - total flux cleaned = -0.000777525 Jy ! Component: 2600 - total flux cleaned = -0.000797763 Jy ! Component: 2650 - total flux cleaned = -0.000797771 Jy ! Component: 2700 - total flux cleaned = -0.000802763 Jy ! Component: 2750 - total flux cleaned = -0.000812754 Jy ! Component: 2800 - total flux cleaned = -0.000792922 Jy ! Component: 2850 - total flux cleaned = -0.000797888 Jy ! Component: 2900 - total flux cleaned = -0.000812675 Jy ! Component: 2950 - total flux cleaned = -0.000827337 Jy ! Component: 3000 - total flux cleaned = -0.000837112 Jy ! Component: 3050 - total flux cleaned = -0.000827436 Jy ! Component: 3100 - total flux cleaned = -0.000841949 Jy ! Component: 3150 - total flux cleaned = -0.000870828 Jy ! Component: 3200 - total flux cleaned = -0.000861231 Jy ! Component: 3250 - total flux cleaned = -0.000851691 Jy ! Component: 3300 - total flux cleaned = -0.000861163 Jy ! Component: 3350 - total flux cleaned = -0.000875386 Jy ! Component: 3400 - total flux cleaned = -0.000880131 Jy ! Component: 3450 - total flux cleaned = -0.000880129 Jy ! Component: 3500 - total flux cleaned = -0.000884778 Jy ! Component: 3550 - total flux cleaned = -0.000889447 Jy ! Component: 3600 - total flux cleaned = -0.000898753 Jy ! Component: 3650 - total flux cleaned = -0.000908004 Jy ! Component: 3700 - total flux cleaned = -0.000921853 Jy ! Component: 3750 - total flux cleaned = -0.00090342 Jy ! Component: 3800 - total flux cleaned = -0.000917166 Jy ! Component: 3850 - total flux cleaned = -0.000917156 Jy ! Component: 3900 - total flux cleaned = -0.000944492 Jy ! Component: 3950 - total flux cleaned = -0.000939968 Jy ! Component: 4000 - total flux cleaned = -0.000939958 Jy ! Component: 4050 - total flux cleaned = -0.000930956 Jy ! Total flux subtracted in 4096 components = -0.000962426 Jy ! Clean residual min=-0.000267 max=0.000258 Jy/beam ! Clean residual mean=-0.000000 rms=0.000078 Jy/beam ! Combined flux in latest and established models = 0.0962041 Jy keep ! Adding 358 model components to the UV plane model. ! The established model now contains 518 components and 0.0962041 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uvm//J1410+6216_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.012 x 1.323 at 11.58 degrees (North through East) ! Clean map min=-0.00037836 max=0.059696 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uvm//J1410+6216_X_a_map.fits wmodel /image_prod/ug002_uvm//J1410+6216_X_a_map.mod ! Writing 518 model components to file: /image_prod/ug002_uvm//J1410+6216_X_a_map.mod wobs /image_prod/ug002_uvm//J1410+6216_X_a_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uvm//J1410+6216_X_a_uvs.fits wwins /image_prod/ug002_uvm//J1410+6216_X_a_map.win ! wwins: Wrote 9 windows to /image_prod/ug002_uvm//J1410+6216_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0596961 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 7.80256e-05 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.392114 0.392114 0.784227 1.56845 3.13691 6.27382 12.5476 25.0953 50.1906 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0002 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.059 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 765.084 quit ! Quitting program ! Log file /image_prod/ug002_uvm//J1410+6216_X_a_dfm.log closed on Wed Mar 4 17:17:48 2020