! Started logfile: /image_prod/ug002_uvm//J1408-0752_X_a_dfm.log on Wed Mar 4 17:17:21 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uvm//J1408-0752_X_a_uvm.fits ! Reading UV FITS file: /image_prod/ug002_uvm//J1408-0752_X_a_uvm.fits ! AN table 1: 12 integrations on 36 of 36 possible baselines. ! AN table 2: 34 integrations on 45 of 45 possible baselines. ! AN table 3: 6 integrations on 15 of 15 possible baselines. ! Apparent sampling: 0.788499 visibilities/baseline/integration-bin. ! Found source: J1408-0752 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 121 lines of history. ! ! Reading 19416 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1408-0752_X_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 22 telescope corrections were flagged in sub-array 1. ! A total of 48 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 22 telescope corrections were flagged in sub-array 1. ! A total of 48 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 22 telescope corrections were flagged in sub-array 1. ! A total of 48 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 22 telescope corrections were flagged in sub-array 1. ! A total of 48 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 5. ! A total of 22 telescope corrections were flagged in sub-array 1. ! A total of 48 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 6. ! A total of 22 telescope corrections were flagged in sub-array 1. ! A total of 48 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 7. ! A total of 22 telescope corrections were flagged in sub-array 1. ! A total of 48 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 8. ! A total of 22 telescope corrections were flagged in sub-array 1. ! A total of 48 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 9. ! A total of 22 telescope corrections were flagged in sub-array 1. ! A total of 48 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 10. ! A total of 22 telescope corrections were flagged in sub-array 1. ! A total of 48 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 11. ! A total of 22 telescope corrections were flagged in sub-array 1. ! A total of 48 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 12. ! A total of 22 telescope corrections were flagged in sub-array 1. ! A total of 48 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=1.713674Jy sigma=8.534864 ! Fit after self-cal, rms=0.451161Jy sigma=2.173973 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6782 mas, bmaj=1.748 mas, bpa=-7.626 degrees ! Estimated noise=1.56437 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.02011 Jy ! Component: 100 - total flux cleaned = 1.24735 Jy ! Total flux subtracted in 100 components = 1.24735 Jy ! Clean residual min=-0.035788 max=0.078765 Jy/beam ! Clean residual mean=-0.000103 rms=0.007271 Jy/beam ! Combined flux in latest and established models = 1.24735 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 1.24735 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.278955Jy sigma=1.359551 ! Fit after self-cal, rms=0.278898Jy sigma=1.359392 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0852346 Jy ! Component: 100 - total flux cleaned = 0.1307 Jy ! Total flux subtracted in 100 components = 0.1307 Jy ! Clean residual min=-0.036244 max=0.061772 Jy/beam ! Clean residual mean=-0.000056 rms=0.006377 Jy/beam ! Combined flux in latest and established models = 1.37805 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 11 components and 1.37805 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.229051Jy sigma=1.161714 ! Fit after self-cal, rms=0.228720Jy sigma=1.160030 ! Inverting map ! Added new window around map position (-1.6, -1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0578371 Jy ! Component: 100 - total flux cleaned = 0.0856847 Jy ! Total flux subtracted in 100 components = 0.0856847 Jy ! Clean residual min=-0.030960 max=0.050345 Jy/beam ! Clean residual mean=-0.000024 rms=0.005807 Jy/beam ! Combined flux in latest and established models = 1.46373 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 20 components and 1.46373 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.204252Jy sigma=1.049742 ! Fit after self-cal, rms=0.202665Jy sigma=1.041631 ! Inverting map ! Added new window around map position (2.6, 1.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0431019 Jy ! Component: 100 - total flux cleaned = 0.0668323 Jy ! Total flux subtracted in 100 components = 0.0668323 Jy ! Clean residual min=-0.029407 max=0.033903 Jy/beam ! Clean residual mean=0.000002 rms=0.005399 Jy/beam ! Combined flux in latest and established models = 1.53056 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 28 components and 1.53056 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.189461Jy sigma=0.981491 ! Fit after self-cal, rms=0.188882Jy sigma=0.978412 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8867 mas, bmaj=2.153 mas, bpa=-6.528 degrees ! Estimated noise=1.06248 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.6, 1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0416324 Jy ! Component: 100 - total flux cleaned = 0.0576117 Jy ! Component: 150 - total flux cleaned = 0.0633897 Jy ! Component: 200 - total flux cleaned = 0.0633798 Jy ! Total flux subtracted in 200 components = 0.0633798 Jy ! Clean residual min=-0.030482 max=0.025765 Jy/beam ! Clean residual mean=0.000042 rms=0.006284 Jy/beam ! Combined flux in latest and established models = 1.59394 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 53 components and 1.59394 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.177196Jy sigma=0.922514 ! Fit after self-cal, rms=0.177053Jy sigma=0.921769 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8867 x 2.153 at -6.528 degrees (North through East) ! Clean map min=-0.028437 max=1.3236 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.04 HN 0.97 KP 1.09 ! LA 1.05 MK 1.10 NL 1.55 OV 0.92 ! PT 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 FD 1.00 HN 0.97 KP 1.04 ! LA 0.97 MK 1.01 NL 1.05 OV 0.99 ! PT 0.90 SC 1.01 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.90 FD 1.07 KP 1.06 LA 1.07 ! MK 0.94 PT 0.95 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.03 HN 0.98 KP 1.08 ! LA 1.07 MK 1.10 NL 1.50 OV 0.92 ! PT 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 FD 0.98 HN 0.96 KP 1.04 ! LA 0.97 MK 1.01 NL 1.03 OV 0.99 ! PT 0.89 SC 1.01 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.92 FD 1.06 KP 1.04 LA 1.08 ! MK 0.93 PT 0.98 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.02 HN 1.00 KP 1.09 ! LA 1.05 MK 1.10 NL 1.46 OV 0.92 ! PT 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 FD 0.99 HN 0.96 KP 1.05 ! LA 0.98 MK 0.99 NL 1.03 OV 0.99 ! PT 0.89 SC 1.01 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.89 FD 1.07 KP 1.03 LA 1.07 ! MK 0.93 PT 0.97 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.06 HN 1.02 KP 1.06 ! LA 1.06 MK 1.10 NL 1.47 OV 0.92 ! PT 0.95 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 FD 0.98 HN 0.95 KP 1.03 ! LA 0.97 MK 1.01 NL 1.04 OV 0.99 ! PT 0.89 SC 1.03 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.91 FD 1.11 KP 1.01 LA 1.10 ! MK 0.96 PT 0.96 ! ! ! Correcting IF 5. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.08 HN 0.99 KP 1.07 ! LA 1.07 MK 1.11 NL 1.52 OV 0.91 ! PT 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 FD 1.01 HN 0.98 KP 1.05 ! LA 0.97 MK 1.01 NL 1.04 OV 0.99 ! PT 0.89 SC 1.01 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.87 FD 1.13 KP 1.02 LA 1.03 ! MK 0.94 PT 0.96 ! ! ! Correcting IF 6. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.04 HN 1.00 KP 1.05 ! LA 1.04 MK 1.11 NL 1.58 OV 0.93 ! PT 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 FD 0.99 HN 0.98 KP 1.05 ! LA 0.97 MK 1.00 NL 1.04 OV 0.98 ! PT 0.90 SC 1.02 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.92 FD 1.08 KP 1.01 LA 1.03 ! MK 0.91 PT 0.93 ! ! ! Correcting IF 7. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.03 HN 0.99 KP 1.06 ! LA 1.06 MK 1.13 NL 1.46 OV 0.90 ! PT 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 FD 0.99 HN 0.97 KP 1.04 ! LA 0.97 MK 1.00 NL 1.05 OV 1.00 ! PT 0.89 SC 1.02 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.90 FD 1.08 KP 1.01 LA 1.06 ! MK 0.98 PT 0.91 ! ! ! Correcting IF 8. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.05 HN 0.99 KP 1.04 ! LA 1.05 MK 1.12 NL 1.47 OV 0.92 ! PT 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.96 FD 0.99 HN 0.98 KP 1.04 ! LA 0.97 MK 1.00 NL 1.03 OV 0.99 ! PT 0.89 SC 1.03 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.90 FD 1.07 KP 1.03 LA 1.07 ! MK 0.91 PT 0.94 ! ! ! Correcting IF 9. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.04 HN 0.96 KP 1.08 ! LA 1.06 MK 1.08 NL 1.51 OV 0.91 ! PT 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 FD 0.98 HN 0.98 KP 1.04 ! LA 0.98 MK 1.01 NL 1.03 OV 0.99 ! PT 0.89 SC 1.01 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.90 FD 1.07 KP 1.00 LA 1.06 ! MK 0.91 PT 0.95 ! ! ! Correcting IF 10. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.04 HN 0.98 KP 1.05 ! LA 1.06 MK 1.12 NL 1.56 OV 0.89 ! PT 0.95 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 FD 1.00 HN 0.98 KP 1.04 ! LA 0.97 MK 1.01 NL 1.04 OV 1.00 ! PT 0.90 SC 0.99 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.93 FD 1.11 KP 1.03 LA 1.02 ! MK 0.95 PT 0.95 ! ! ! Correcting IF 11. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.04 HN 1.00 KP 1.07 ! LA 1.06 MK 1.09 NL 1.57 OV 0.91 ! PT 0.93 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 0.99 HN 0.99 KP 1.04 ! LA 0.97 MK 1.01 NL 1.03 OV 1.00 ! PT 0.89 SC 1.04 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.91 FD 1.05 KP 1.02 LA 1.04 ! MK 0.91 PT 0.96 ! ! ! Correcting IF 12. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.06 HN 1.02 KP 1.03 ! LA 1.07 MK 1.06 NL 1.47 OV 0.93 ! PT 0.95 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 FD 0.99 HN 1.00 KP 1.03 ! LA 0.97 MK 1.03 NL 1.03 OV 1.00 ! PT 0.89 SC 1.03 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.86 FD 1.00 KP 1.03 LA 1.02 ! MK 0.96 PT 0.91 ! ! ! Fit before self-cal, rms=0.177053Jy sigma=0.921769 ! Fit after self-cal, rms=0.112704Jy sigma=0.547523 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.889 mas, bmaj=2.149 mas, bpa=-6.182 degrees ! Estimated noise=1.06206 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0159101 Jy ! Component: 100 - total flux cleaned = -0.0232965 Jy ! Component: 150 - total flux cleaned = -0.0283073 Jy ! Component: 200 - total flux cleaned = -0.0312401 Jy ! Total flux subtracted in 200 components = -0.0312401 Jy ! Clean residual min=-0.013219 max=0.014871 Jy/beam ! Clean residual mean=-0.000033 rms=0.002752 Jy/beam ! Combined flux in latest and established models = 1.5627 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 72 components and 1.5627 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.106607Jy sigma=0.519757 ! Fit after self-cal, rms=0.106511Jy sigma=0.518977 ! Inverting map ! Added new window around map position (-7.4, -0.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.014004 Jy ! Component: 100 - total flux cleaned = 0.0156606 Jy ! Component: 150 - total flux cleaned = 0.0163502 Jy ! Component: 200 - total flux cleaned = 0.0169669 Jy ! Total flux subtracted in 200 components = 0.0169669 Jy ! Clean residual min=-0.011643 max=0.012020 Jy/beam ! Clean residual mean=-0.000027 rms=0.002548 Jy/beam ! Combined flux in latest and established models = 1.57967 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 89 components and 1.57967 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.103534Jy sigma=0.505473 ! Fit after self-cal, rms=0.103387Jy sigma=0.504838 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.103387Jy sigma=0.504838 ! Fit after self-cal, rms=0.080240Jy sigma=0.386001 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8887 mas, bmaj=2.156 mas, bpa=-6.111 degrees ! Estimated noise=1.06018 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0122346 Jy ! Component: 100 - total flux cleaned = -0.0133818 Jy ! Component: 150 - total flux cleaned = -0.0133881 Jy ! Component: 200 - total flux cleaned = -0.0129183 Jy ! Total flux subtracted in 200 components = -0.0129183 Jy ! Clean residual min=-0.006492 max=0.007976 Jy/beam ! Clean residual mean=-0.000038 rms=0.001401 Jy/beam ! Combined flux in latest and established models = 1.56675 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 100 components and 1.56675 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.077416Jy sigma=0.372152 ! Fit after self-cal, rms=0.077353Jy sigma=0.371852 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-10.6, -3.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00583281 Jy ! Component: 100 - total flux cleaned = 0.0077948 Jy ! Component: 150 - total flux cleaned = 0.00913063 Jy ! Component: 200 - total flux cleaned = 0.0101723 Jy ! Total flux subtracted in 200 components = 0.0101723 Jy ! Clean residual min=-0.006158 max=0.005681 Jy/beam ! Clean residual mean=-0.000034 rms=0.001285 Jy/beam ! Combined flux in latest and established models = 1.57692 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 123 components and 1.57692 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076224Jy sigma=0.366086 ! Fit after self-cal, rms=0.076175Jy sigma=0.365852 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076175Jy sigma=0.365852 ! Fit after self-cal, rms=0.074934Jy sigma=0.360573 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.888 mas, bmaj=2.155 mas, bpa=-6.062 degrees ! Estimated noise=1.0587 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00892368 Jy ! Component: 100 - total flux cleaned = -0.00997918 Jy ! Component: 150 - total flux cleaned = -0.00938743 Jy ! Component: 200 - total flux cleaned = -0.00835937 Jy ! Total flux subtracted in 200 components = -0.00835937 Jy ! Clean residual min=-0.005355 max=0.004945 Jy/beam ! Clean residual mean=-0.000032 rms=0.001103 Jy/beam ! Combined flux in latest and established models = 1.56857 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 130 components and 1.56857 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073459Jy sigma=0.353290 ! Fit after self-cal, rms=0.073427Jy sigma=0.353130 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00060676 Jy ! Component: 100 - total flux cleaned = 0.00163249 Jy ! Component: 150 - total flux cleaned = 0.00245261 Jy ! Component: 200 - total flux cleaned = 0.00309626 Jy ! Total flux subtracted in 200 components = 0.00309626 Jy ! Clean residual min=-0.005276 max=0.004899 Jy/beam ! Clean residual mean=-0.000030 rms=0.001066 Jy/beam ! Combined flux in latest and established models = 1.57166 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 140 components and 1.57166 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072945Jy sigma=0.350699 ! Fit after self-cal, rms=0.072928Jy sigma=0.350625 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072928Jy sigma=0.350625 ! Fit after self-cal, rms=0.072284Jy sigma=0.347983 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.098 mas, bmaj=3.636 mas, bpa=0.5421 degrees ! Estimated noise=1.41261 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00244061 Jy ! Component: 100 - total flux cleaned = -0.00148155 Jy ! Component: 150 - total flux cleaned = -0.000863725 Jy ! Component: 200 - total flux cleaned = -0.000145799 Jy ! Total flux subtracted in 200 components = -0.000145799 Jy ! Clean residual min=-0.005178 max=0.005022 Jy/beam ! Clean residual mean=-0.000059 rms=0.001361 Jy/beam ! Combined flux in latest and established models = 1.57152 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 172 components and 1.57152 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071968Jy sigma=0.346827 ! Fit after self-cal, rms=0.071952Jy sigma=0.346643 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000760936 Jy ! Component: 100 - total flux cleaned = 0.00129643 Jy ! Component: 150 - total flux cleaned = 0.00160518 Jy ! Component: 200 - total flux cleaned = 0.00188243 Jy ! Total flux subtracted in 200 components = 0.00188243 Jy ! Clean residual min=-0.005157 max=0.004993 Jy/beam ! Clean residual mean=-0.000057 rms=0.001338 Jy/beam ! Combined flux in latest and established models = 1.5734 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 183 components and 1.5734 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071801Jy sigma=0.345993 ! Fit after self-cal, rms=0.071799Jy sigma=0.345931 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8874 mas, bmaj=2.153 mas, bpa=-6.027 degrees ! Estimated noise=1.05766 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8874 x 2.153 at -6.027 degrees (North through East) ! Clean map min=-0.0071655 max=1.3225 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071799Jy sigma=0.345931 ! Fit after self-cal, rms=0.066110Jy sigma=0.306937 ! Inverting map and beam ! Estimated beam: bmin=0.8877 mas, bmaj=2.154 mas, bpa=-6.02 degrees ! Estimated noise=1.05832 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00517339 Jy ! Component: 100 - total flux cleaned = -0.00537159 Jy ! Component: 150 - total flux cleaned = -0.00522225 Jy ! Component: 200 - total flux cleaned = -0.00508192 Jy ! Total flux subtracted in 200 components = -0.00508192 Jy ! Clean residual min=-0.004114 max=0.004297 Jy/beam ! Clean residual mean=-0.000027 rms=0.000872 Jy/beam ! Combined flux in latest and established models = 1.56832 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 189 components and 1.56832 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065223Jy sigma=0.302288 ! Fit after self-cal, rms=0.065195Jy sigma=0.302191 ! Inverting map ! Added new window around map position (-2, 18). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000284145 Jy ! Component: 100 - total flux cleaned = -0.000125135 Jy ! Component: 150 - total flux cleaned = 3.28757e-06 Jy ! Component: 200 - total flux cleaned = -0.000345599 Jy ! Total flux subtracted in 200 components = -0.000345599 Jy ! Clean residual min=-0.003691 max=0.003694 Jy/beam ! Clean residual mean=-0.000028 rms=0.000830 Jy/beam ! Combined flux in latest and established models = 1.56797 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 199 components and 1.56797 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064622Jy sigma=0.299415 ! Fit after self-cal, rms=0.064600Jy sigma=0.299308 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064600Jy sigma=0.299308 ! Fit after self-cal, rms=0.064218Jy sigma=0.298007 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6802 mas, bmaj=1.752 mas, bpa=-7.133 degrees ! Estimated noise=1.55653 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.01331 Jy ! Component: 100 - total flux cleaned = 1.23764 Jy ! Component: 150 - total flux cleaned = 1.32477 Jy ! Component: 200 - total flux cleaned = 1.37834 Jy ! Total flux subtracted in 200 components = 1.37834 Jy ! Clean residual min=-0.010598 max=0.029792 Jy/beam ! Clean residual mean=-0.000082 rms=0.002262 Jy/beam ! Combined flux in latest and established models = 1.37834 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 1.37834 Jy ! Inverting map and beam ! Estimated beam: bmin=0.887 mas, bmaj=2.153 mas, bpa=-6.011 degrees ! Estimated noise=1.05724 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0583763 Jy ! Component: 100 - total flux cleaned = 0.0899977 Jy ! Component: 150 - total flux cleaned = 0.109723 Jy ! Component: 200 - total flux cleaned = 0.12466 Jy ! Total flux subtracted in 200 components = 0.12466 Jy ! Clean residual min=-0.006217 max=0.008834 Jy/beam ! Clean residual mean=-0.000050 rms=0.001503 Jy/beam ! Combined flux in latest and established models = 1.503 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 37 components and 1.503 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.011921 Jy ! Component: 100 - total flux cleaned = 0.0216815 Jy ! Component: 150 - total flux cleaned = 0.029851 Jy ! Component: 200 - total flux cleaned = 0.0367758 Jy ! Total flux subtracted in 200 components = 0.0367758 Jy ! Clean residual min=-0.004985 max=0.004907 Jy/beam ! Clean residual mean=-0.000036 rms=0.001064 Jy/beam ! Combined flux in latest and established models = 1.53977 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 69 components and 1.53977 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.1 mas, bmaj=3.635 mas, bpa=0.6138 degrees ! Estimated noise=1.4124 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00997493 Jy ! Component: 100 - total flux cleaned = 0.016607 Jy ! Component: 150 - total flux cleaned = 0.0209961 Jy ! Component: 200 - total flux cleaned = 0.0236208 Jy ! Total flux subtracted in 200 components = 0.0236208 Jy ! Clean residual min=-0.004536 max=0.004246 Jy/beam ! Clean residual mean=-0.000057 rms=0.001260 Jy/beam ! Combined flux in latest and established models = 1.56339 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00116188 Jy ! Component: 100 - total flux cleaned = 0.00203959 Jy ! Component: 150 - total flux cleaned = 0.00249558 Jy ! Component: 200 - total flux cleaned = 0.00270812 Jy ! Total flux subtracted in 200 components = 0.00270812 Jy ! Clean residual min=-0.004361 max=0.004017 Jy/beam ! Clean residual mean=-0.000055 rms=0.001169 Jy/beam ! Combined flux in latest and established models = 1.5661 Jy ! Adding 83 model components to the UV plane model. ! The established model now contains 142 components and 1.5661 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.887 mas, bmaj=2.153 mas, bpa=-6.011 degrees ! Estimated noise=1.05724 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000447276 Jy ! Component: 100 - total flux cleaned = 0.000592878 Jy ! Component: 150 - total flux cleaned = 0.000708162 Jy ! Component: 200 - total flux cleaned = 0.000587606 Jy ! Total flux subtracted in 200 components = 0.000587606 Jy ! Clean residual min=-0.003384 max=0.003466 Jy/beam ! Clean residual mean=-0.000025 rms=0.000777 Jy/beam ! Combined flux in latest and established models = 1.56669 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 161 components and 1.56669 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063649Jy sigma=0.295645 ! Fit after self-cal, rms=0.063498Jy sigma=0.294737 wmodel J1408-0752_X_a_map.mod ! Writing 161 model components to file: J1408-0752_X_a_map.mod wobs J1408-0752_X_a_uvs.fits ! Writing UV FITS file: J1408-0752_X_a_uvs.fits wwins J1408-0752_X_a_map.win ! wwins: Wrote 7 windows to J1408-0752_X_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00120402 Jy ! Component: 100 - total flux cleaned = 0.00144834 Jy ! Component: 150 - total flux cleaned = 0.00156453 Jy ! Component: 200 - total flux cleaned = 0.00161955 Jy ! Component: 250 - total flux cleaned = 0.00140602 Jy ! Component: 300 - total flux cleaned = 0.0011463 Jy ! Component: 350 - total flux cleaned = 0.000893715 Jy ! Component: 400 - total flux cleaned = 0.000793404 Jy ! Component: 450 - total flux cleaned = 0.000501481 Jy ! Component: 500 - total flux cleaned = 0.000357844 Jy ! Component: 550 - total flux cleaned = 0.000122348 Jy ! Component: 600 - total flux cleaned = -6.28463e-05 Jy ! Component: 650 - total flux cleaned = -0.000290928 Jy ! Component: 700 - total flux cleaned = -0.000470579 Jy ! Component: 750 - total flux cleaned = -0.000648192 Jy ! Component: 800 - total flux cleaned = -0.000823927 Jy ! Component: 850 - total flux cleaned = -0.000954623 Jy ! Component: 900 - total flux cleaned = -0.00108306 Jy ! Component: 950 - total flux cleaned = -0.00137803 Jy ! Component: 1000 - total flux cleaned = -0.00137768 Jy ! Component: 1050 - total flux cleaned = -0.00145978 Jy ! Component: 1100 - total flux cleaned = -0.00154155 Jy ! Component: 1150 - total flux cleaned = -0.00162308 Jy ! Component: 1200 - total flux cleaned = -0.00174263 Jy ! Component: 1250 - total flux cleaned = -0.00170323 Jy ! Component: 1300 - total flux cleaned = -0.00170315 Jy ! Component: 1350 - total flux cleaned = -0.00178072 Jy ! Component: 1400 - total flux cleaned = -0.00189463 Jy ! Component: 1450 - total flux cleaned = -0.00193244 Jy ! Component: 1500 - total flux cleaned = -0.00200733 Jy ! Component: 1550 - total flux cleaned = -0.00208147 Jy ! Component: 1600 - total flux cleaned = -0.00219197 Jy ! Component: 1650 - total flux cleaned = -0.0023013 Jy ! Component: 1700 - total flux cleaned = -0.00244595 Jy ! Component: 1750 - total flux cleaned = -0.00244565 Jy ! Component: 1800 - total flux cleaned = -0.00258822 Jy ! Component: 1850 - total flux cleaned = -0.00286969 Jy ! Component: 1900 - total flux cleaned = -0.0029047 Jy ! Component: 1950 - total flux cleaned = -0.00287011 Jy ! Component: 2000 - total flux cleaned = -0.0032478 Jy ! Component: 2050 - total flux cleaned = -0.00324753 Jy ! Component: 2100 - total flux cleaned = -0.00328101 Jy ! Component: 2150 - total flux cleaned = -0.00354924 Jy ! Component: 2200 - total flux cleaned = -0.00351614 Jy ! Component: 2250 - total flux cleaned = -0.00358197 Jy ! Component: 2300 - total flux cleaned = -0.00384366 Jy ! Component: 2350 - total flux cleaned = -0.00390896 Jy ! Component: 2400 - total flux cleaned = -0.00403769 Jy ! Component: 2450 - total flux cleaned = -0.00416556 Jy ! Component: 2500 - total flux cleaned = -0.00410205 Jy ! Component: 2550 - total flux cleaned = -0.00432345 Jy ! Component: 2600 - total flux cleaned = -0.00447979 Jy ! Component: 2650 - total flux cleaned = -0.00451087 Jy ! Component: 2700 - total flux cleaned = -0.00460359 Jy ! Component: 2750 - total flux cleaned = -0.00466519 Jy ! Component: 2800 - total flux cleaned = -0.00472607 Jy ! Component: 2850 - total flux cleaned = -0.00478659 Jy ! Component: 2900 - total flux cleaned = -0.00496694 Jy ! Component: 2950 - total flux cleaned = -0.00493726 Jy ! Component: 3000 - total flux cleaned = -0.00496687 Jy ! Component: 3050 - total flux cleaned = -0.0052024 Jy ! Component: 3100 - total flux cleaned = -0.00517343 Jy ! Component: 3150 - total flux cleaned = -0.00505753 Jy ! Component: 3200 - total flux cleaned = -0.0051153 Jy ! Component: 3250 - total flux cleaned = -0.00523047 Jy ! Component: 3300 - total flux cleaned = -0.00531606 Jy ! Component: 3350 - total flux cleaned = -0.00531614 Jy ! Component: 3400 - total flux cleaned = -0.00537241 Jy ! Component: 3450 - total flux cleaned = -0.00528831 Jy ! Component: 3500 - total flux cleaned = -0.00542707 Jy ! Component: 3550 - total flux cleaned = -0.00539942 Jy ! Component: 3600 - total flux cleaned = -0.00534441 Jy ! Component: 3650 - total flux cleaned = -0.00542653 Jy ! Component: 3700 - total flux cleaned = -0.00529071 Jy ! Component: 3750 - total flux cleaned = -0.00539848 Jy ! Component: 3800 - total flux cleaned = -0.00547896 Jy ! Component: 3850 - total flux cleaned = -0.00555909 Jy ! Component: 3900 - total flux cleaned = -0.00555921 Jy ! Component: 3950 - total flux cleaned = -0.0055855 Jy ! Component: 4000 - total flux cleaned = -0.00550672 Jy ! Component: 4050 - total flux cleaned = -0.00561116 Jy ! Total flux subtracted in 4096 components = -0.00548147 Jy ! Clean residual min=-0.001403 max=0.001313 Jy/beam ! Clean residual mean=-0.000013 rms=0.000472 Jy/beam ! Combined flux in latest and established models = 1.56121 Jy keep ! Adding 334 model components to the UV plane model. ! The established model now contains 494 components and 1.56121 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uvm//J1408-0752_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.887 x 2.153 at -6.011 degrees (North through East) ! Clean map min=-0.0030151 max=1.3286 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uvm//J1408-0752_X_a_map.fits wmodel /image_prod/ug002_uvm//J1408-0752_X_a_map.mod ! Writing 494 model components to file: /image_prod/ug002_uvm//J1408-0752_X_a_map.mod wobs /image_prod/ug002_uvm//J1408-0752_X_a_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uvm//J1408-0752_X_a_uvs.fits wwins /image_prod/ug002_uvm//J1408-0752_X_a_map.win ! wwins: Wrote 8 windows to /image_prod/ug002_uvm//J1408-0752_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 1.32858 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000471592 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.106488 0.106488 0.212976 0.425953 0.851906 1.70381 3.40762 6.81524 13.6305 27.261 54.522 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak= ", int(1000*peak_flux)/1000 ! peak= 1.328 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2817.21 quit ! Quitting program ! Log file /image_prod/ug002_uvm//J1408-0752_X_a_dfm.log closed on Wed Mar 4 17:17:27 2020