! Started logfile: /image_prod/ug002_uvm//J1358+8340_X_a_dfm.log on Wed Mar 4 17:16:28 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uvm//J1358+8340_X_a_uvm.fits ! Reading UV FITS file: /image_prod/ug002_uvm//J1358+8340_X_a_uvm.fits ! AN table 1: 15 integrations on 15 of 15 possible baselines. ! AN table 2: 45 integrations on 36 of 36 possible baselines. ! AN table 3: 100 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.786042 visibilities/baseline/integration-bin. ! Found source: J1358+8340 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 51360 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1358+8340_X_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 60 telescope corrections were flagged in sub-array 2. ! A total of 150 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 60 telescope corrections were flagged in sub-array 2. ! A total of 150 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 60 telescope corrections were flagged in sub-array 2. ! A total of 150 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 60 telescope corrections were flagged in sub-array 2. ! A total of 150 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 5. ! A total of 60 telescope corrections were flagged in sub-array 2. ! A total of 150 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 6. ! A total of 60 telescope corrections were flagged in sub-array 2. ! A total of 150 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 7. ! A total of 60 telescope corrections were flagged in sub-array 2. ! A total of 150 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 8. ! A total of 60 telescope corrections were flagged in sub-array 2. ! A total of 150 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 9. ! A total of 60 telescope corrections were flagged in sub-array 2. ! A total of 150 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 10. ! A total of 60 telescope corrections were flagged in sub-array 2. ! A total of 150 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 11. ! A total of 60 telescope corrections were flagged in sub-array 2. ! A total of 150 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 12. ! A total of 60 telescope corrections were flagged in sub-array 2. ! A total of 150 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=1.002300Jy sigma=9.181386 ! Fit after self-cal, rms=0.967101Jy sigma=8.863663 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8512 mas, bmaj=1.515 mas, bpa=-82.98 degrees ! Estimated noise=0.799373 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0250423 Jy ! Component: 100 - total flux cleaned = 0.0322824 Jy ! Total flux subtracted in 100 components = 0.0322824 Jy ! Clean residual min=-0.002256 max=0.005159 Jy/beam ! Clean residual mean=0.000001 rms=0.000531 Jy/beam ! Combined flux in latest and established models = 0.0322824 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.0322824 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056880Jy sigma=0.474240 ! Fit after self-cal, rms=0.055299Jy sigma=0.459170 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00570154 Jy ! Component: 100 - total flux cleaned = 0.00894404 Jy ! Total flux subtracted in 100 components = 0.00894404 Jy ! Clean residual min=-0.001964 max=0.005220 Jy/beam ! Clean residual mean=0.000001 rms=0.000488 Jy/beam ! Combined flux in latest and established models = 0.0412264 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.0412264 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054462Jy sigma=0.450340 ! Fit after self-cal, rms=0.054439Jy sigma=0.450029 ! Inverting map ! Added new window around map position (1.8, -1.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00444982 Jy ! Component: 100 - total flux cleaned = 0.00674159 Jy ! Total flux subtracted in 100 components = 0.00674159 Jy ! Clean residual min=-0.001786 max=0.003436 Jy/beam ! Clean residual mean=-0.000000 rms=0.000434 Jy/beam ! Combined flux in latest and established models = 0.047968 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 23 components and 0.047968 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054022Jy sigma=0.445546 ! Fit after self-cal, rms=0.053920Jy sigma=0.444553 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00262393 Jy ! Component: 100 - total flux cleaned = 0.00380873 Jy ! Total flux subtracted in 100 components = 0.00380873 Jy ! Clean residual min=-0.001866 max=0.002589 Jy/beam ! Clean residual mean=-0.000000 rms=0.000418 Jy/beam ! Combined flux in latest and established models = 0.0517768 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 28 components and 0.0517768 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053780Jy sigma=0.443072 ! Fit after self-cal, rms=0.053736Jy sigma=0.442661 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.175 mas, bmaj=1.801 mas, bpa=-80.5 degrees ! Estimated noise=0.364671 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00200113 Jy ! Component: 100 - total flux cleaned = 0.00303476 Jy ! Component: 150 - total flux cleaned = 0.00352221 Jy ! Component: 200 - total flux cleaned = 0.00368658 Jy ! Total flux subtracted in 200 components = 0.00368658 Jy ! Clean residual min=-0.001151 max=0.001818 Jy/beam ! Clean residual mean=-0.000001 rms=0.000265 Jy/beam ! Combined flux in latest and established models = 0.0554633 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 36 components and 0.0554633 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053666Jy sigma=0.441881 ! Fit after self-cal, rms=0.053633Jy sigma=0.441588 ! Inverting map ! Added new window around map position (4.4, -1.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00162301 Jy ! Component: 100 - total flux cleaned = 0.00242097 Jy ! Component: 150 - total flux cleaned = 0.00278187 Jy ! Component: 200 - total flux cleaned = 0.00294 Jy ! Total flux subtracted in 200 components = 0.00294 Jy ! Clean residual min=-0.001067 max=0.001253 Jy/beam ! Clean residual mean=-0.000001 rms=0.000244 Jy/beam ! Combined flux in latest and established models = 0.0584033 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 59 components and 0.0584033 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053579Jy sigma=0.441035 ! Fit after self-cal, rms=0.053545Jy sigma=0.440775 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.175 x 1.801 at -80.5 degrees (North through East) ! Clean map min=-0.00099723 max=0.034093 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 HN 0.82 KP 1.21 LA 0.86 ! NL 1.34 OV 0.82 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 0.98 HN 1.03 KP 1.04 ! LA 1.01 MK 1.20 OV 0.95 PT 0.95 ! SC 1.02 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.04 FD 1.00 HN 1.05 KP 1.01 ! LA 1.00* NL 1.03 OV 1.04 PT 0.98 ! SC 0.89 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 HN 0.83 KP 1.01 LA 1.28 ! NL 1.56 OV 0.89 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.06 FD 1.02 HN 0.93 KP 0.98 ! LA 1.08 MK 1.11 OV 0.90 PT 1.00 ! SC 0.92 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.05 FD 1.06 HN 1.03 KP 0.97 ! LA 1.00* NL 1.14 OV 1.03 PT 0.99 ! SC 0.89 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 HN 0.84 KP 1.01 LA 1.08 ! NL 1.30 OV 0.87 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.05 FD 1.05 HN 0.88 KP 1.04 ! LA 1.06 MK 1.20 OV 0.95 PT 1.01 ! SC 1.12 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 1.08 HN 1.02 KP 0.96 ! LA 1.00* NL 1.09 OV 1.03 PT 1.06 ! SC 0.92 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 HN 1.05 KP 1.08 LA 1.09 ! NL 1.22 OV 0.87 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 FD 1.03 HN 0.96 KP 1.06 ! LA 1.02 MK 1.03 OV 0.86 PT 0.98 ! SC 0.95 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.05 FD 1.03 HN 1.02 KP 0.98 ! LA 1.00* NL 1.08 OV 1.04 PT 1.04 ! SC 0.88 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 HN 0.83 KP 0.99 LA 0.97 ! NL 1.16 OV 1.05 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.11 FD 0.95 HN 0.93 KP 1.06 ! LA 0.99 MK 1.25 OV 0.93 PT 0.91 ! SC 0.93 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 1.03 HN 0.99 KP 0.96 ! LA 1.00* NL 1.09 OV 1.10 PT 0.77 ! SC 0.82 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 HN 0.81 KP 1.17 LA 0.91 ! NL 1.29 OV 0.92 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 1.01 HN 1.01 KP 1.00 ! LA 1.03 MK 1.10 OV 0.99 PT 0.98 ! SC 1.07 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.97 FD 1.07 HN 1.02 KP 0.97 ! LA 1.00* NL 1.07 OV 1.03 PT 0.97 ! SC 0.87 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.84 HN 0.70 KP 0.97 LA 1.07 ! NL 1.12 OV 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 1.05 HN 0.98 KP 1.04 ! LA 1.00 MK 1.29 OV 0.88 PT 0.96 ! SC 0.95 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 1.06 HN 1.14 KP 1.03 ! LA 1.00* NL 1.12 OV 1.04 PT 0.99 ! SC 0.88 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 HN 0.91 KP 1.03 LA 0.95 ! NL 1.14 OV 0.95 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 1.06 HN 0.91 KP 1.06 ! LA 1.06 MK 1.18 OV 0.89 PT 0.94 ! SC 0.82 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.07 FD 0.96 HN 1.00 KP 1.04 ! LA 1.00* NL 1.00 OV 1.07 PT 1.02 ! SC 0.83 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 HN 0.76 KP 1.08 LA 0.95 ! NL 1.07 OV 0.84 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.96 FD 1.07 HN 0.75 KP 1.08 ! LA 1.04 MK 1.14 OV 0.97 PT 0.93 ! SC 1.00 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 1.07 HN 1.00 KP 0.96 ! LA 1.00* NL 1.02 OV 1.04 PT 1.04 ! SC 0.80 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 HN 0.92 KP 1.10 LA 0.93 ! NL 1.14 OV 0.82 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.93 FD 1.02 HN 0.84 KP 1.03 ! LA 0.95 MK 1.11 OV 0.98 PT 0.90 ! SC 0.77 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 1.04 HN 1.09 KP 0.94 ! LA 1.00* NL 0.95 OV 1.05 PT 1.05 ! SC 0.80 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 HN 0.64 KP 1.08 LA 0.98 ! NL 1.33 OV 0.90 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 0.92 HN 0.95 KP 1.08 ! LA 1.00 MK 1.01 OV 0.95 PT 0.95 ! SC 0.77 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.97 FD 1.12 HN 1.06 KP 0.98 ! LA 1.00* NL 0.96 OV 0.98 PT 1.02 ! SC 0.76 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 HN 0.87 KP 0.84 LA 1.05 ! NL 0.85 OV 0.88 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.93 FD 1.02 HN 0.81 KP 0.99 ! LA 1.09 MK 1.11 OV 0.87 PT 0.93 ! SC 0.86 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.92 FD 0.99 HN 0.99 KP 0.94 ! LA 1.00* NL 1.09 OV 0.98 PT 0.97 ! SC 0.86 ! ! ! Fit before self-cal, rms=0.053545Jy sigma=0.440775 ! Fit after self-cal, rms=0.051207Jy sigma=0.439241 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.162 mas, bmaj=1.751 mas, bpa=-80 degrees ! Estimated noise=0.361912 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000674015 Jy ! Component: 100 - total flux cleaned = 0.000973045 Jy ! Component: 150 - total flux cleaned = 0.00117797 Jy ! Component: 200 - total flux cleaned = 0.00127378 Jy ! Total flux subtracted in 200 components = 0.00127378 Jy ! Clean residual min=-0.000871 max=0.000954 Jy/beam ! Clean residual mean=-0.000001 rms=0.000196 Jy/beam ! Combined flux in latest and established models = 0.0596771 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 70 components and 0.0596771 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051186Jy sigma=0.439044 ! Fit after self-cal, rms=0.051177Jy sigma=0.438671 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051177Jy sigma=0.438671 ! Fit after self-cal, rms=0.051129Jy sigma=0.436992 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.154 mas, bmaj=1.729 mas, bpa=-80.17 degrees ! Estimated noise=0.359543 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00031056 Jy ! Component: 100 - total flux cleaned = 0.000471837 Jy ! Component: 150 - total flux cleaned = 0.000557364 Jy ! Component: 200 - total flux cleaned = 0.000594087 Jy ! Total flux subtracted in 200 components = 0.000594087 Jy ! Clean residual min=-0.000719 max=0.000795 Jy/beam ! Clean residual mean=0.000001 rms=0.000167 Jy/beam ! Combined flux in latest and established models = 0.0602712 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 82 components and 0.0602712 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051118Jy sigma=0.436898 ! Fit after self-cal, rms=0.051190Jy sigma=0.436531 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (5, 22.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000660861 Jy ! Component: 100 - total flux cleaned = 0.000790579 Jy ! Component: 150 - total flux cleaned = 0.000897799 Jy ! Component: 200 - total flux cleaned = 0.00100438 Jy ! Total flux subtracted in 200 components = 0.00100438 Jy ! Clean residual min=-0.000698 max=0.000669 Jy/beam ! Clean residual mean=0.000001 rms=0.000164 Jy/beam ! Combined flux in latest and established models = 0.0612756 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 96 components and 0.0612756 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051175Jy sigma=0.436417 ! Fit after self-cal, rms=0.051173Jy sigma=0.436383 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051173Jy sigma=0.436383 ! Fit after self-cal, rms=0.051315Jy sigma=0.436280 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.149 mas, bmaj=1.714 mas, bpa=-80.05 degrees ! Estimated noise=0.356886 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00040458 Jy ! Component: 100 - total flux cleaned = 0.000631028 Jy ! Component: 150 - total flux cleaned = 0.00079241 Jy ! Component: 200 - total flux cleaned = 0.000921095 Jy ! Total flux subtracted in 200 components = 0.000921095 Jy ! Clean residual min=-0.000669 max=0.000634 Jy/beam ! Clean residual mean=0.000001 rms=0.000158 Jy/beam ! Combined flux in latest and established models = 0.0621967 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 97 components and 0.0621967 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051304Jy sigma=0.436193 ! Fit after self-cal, rms=0.051332Jy sigma=0.436118 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000239749 Jy ! Component: 100 - total flux cleaned = 0.000347556 Jy ! Component: 150 - total flux cleaned = 0.00041917 Jy ! Component: 200 - total flux cleaned = 0.000430392 Jy ! Total flux subtracted in 200 components = 0.000430392 Jy ! Clean residual min=-0.000669 max=0.000636 Jy/beam ! Clean residual mean=0.000001 rms=0.000158 Jy/beam ! Combined flux in latest and established models = 0.0626271 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 98 components and 0.0626271 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051325Jy sigma=0.436071 ! Fit after self-cal, rms=0.051321Jy sigma=0.436052 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051321Jy sigma=0.436052 ! Fit after self-cal, rms=0.051226Jy sigma=0.436015 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.448 mas, bmaj=2.768 mas, bpa=-73.47 degrees ! Estimated noise=0.433645 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000418531 Jy ! Component: 100 - total flux cleaned = 0.000528935 Jy ! Component: 150 - total flux cleaned = 0.000614348 Jy ! Component: 200 - total flux cleaned = 0.000647953 Jy ! Total flux subtracted in 200 components = 0.000647953 Jy ! Clean residual min=-0.000637 max=0.000682 Jy/beam ! Clean residual mean=0.000002 rms=0.000177 Jy/beam ! Combined flux in latest and established models = 0.063275 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 110 components and 0.063275 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051224Jy sigma=0.435989 ! Fit after self-cal, rms=0.051235Jy sigma=0.435960 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.47218e-05 Jy ! Component: 100 - total flux cleaned = 8.66003e-05 Jy ! Component: 150 - total flux cleaned = 9.44124e-05 Jy ! Component: 200 - total flux cleaned = 0.000101594 Jy ! Total flux subtracted in 200 components = 0.000101594 Jy ! Clean residual min=-0.000655 max=0.000679 Jy/beam ! Clean residual mean=0.000001 rms=0.000177 Jy/beam ! Combined flux in latest and established models = 0.0633766 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 116 components and 0.0633766 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051234Jy sigma=0.435956 ! Fit after self-cal, rms=0.051234Jy sigma=0.435951 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=1.145 mas, bmaj=1.705 mas, bpa=-79.98 degrees ! Estimated noise=0.354614 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.145 x 1.705 at -79.98 degrees (North through East) ! Clean map min=-0.00065173 max=0.032385 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8458 mas, bmaj=1.437 mas, bpa=-82.46 degrees ! Estimated noise=0.755477 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0243683 Jy ! Component: 100 - total flux cleaned = 0.034687 Jy ! Component: 150 - total flux cleaned = 0.0414979 Jy ! Component: 200 - total flux cleaned = 0.0461359 Jy ! Total flux subtracted in 200 components = 0.0461359 Jy ! Clean residual min=-0.001565 max=0.002599 Jy/beam ! Clean residual mean=0.000002 rms=0.000417 Jy/beam ! Combined flux in latest and established models = 0.0461359 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.0461359 Jy ! Inverting map and beam ! Estimated beam: bmin=1.145 mas, bmaj=1.705 mas, bpa=-79.98 degrees ! Estimated noise=0.354614 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0047729 Jy ! Component: 100 - total flux cleaned = 0.00783432 Jy ! Component: 150 - total flux cleaned = 0.0099874 Jy ! Component: 200 - total flux cleaned = 0.0116072 Jy ! Total flux subtracted in 200 components = 0.0116072 Jy ! Clean residual min=-0.000853 max=0.000962 Jy/beam ! Clean residual mean=0.000002 rms=0.000194 Jy/beam ! Combined flux in latest and established models = 0.0577431 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 53 components and 0.0577431 Jy ! Inverting map ! Added new window around map position (-1.6, 0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00126802 Jy ! Component: 100 - total flux cleaned = 0.00228767 Jy ! Component: 150 - total flux cleaned = 0.00311959 Jy ! Component: 200 - total flux cleaned = 0.00376157 Jy ! Total flux subtracted in 200 components = 0.00376157 Jy ! Clean residual min=-0.000752 max=0.000679 Jy/beam ! Clean residual mean=0.000001 rms=0.000165 Jy/beam ! Combined flux in latest and established models = 0.0615047 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 72 components and 0.0615047 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.448 mas, bmaj=2.768 mas, bpa=-73.47 degrees ! Estimated noise=0.433645 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000777186 Jy ! Component: 100 - total flux cleaned = 0.00126414 Jy ! Component: 150 - total flux cleaned = 0.00162219 Jy ! Component: 200 - total flux cleaned = 0.00181564 Jy ! Total flux subtracted in 200 components = 0.00181564 Jy ! Clean residual min=-0.000670 max=0.000658 Jy/beam ! Clean residual mean=0.000001 rms=0.000179 Jy/beam ! Combined flux in latest and established models = 0.0633203 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.6465e-05 Jy ! Component: 100 - total flux cleaned = 0.000127437 Jy ! Component: 150 - total flux cleaned = 0.000150168 Jy ! Component: 200 - total flux cleaned = 0.000143174 Jy ! Total flux subtracted in 200 components = 0.000143174 Jy ! Clean residual min=-0.000672 max=0.000666 Jy/beam ! Clean residual mean=0.000001 rms=0.000177 Jy/beam ! Combined flux in latest and established models = 0.0634635 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 117 components and 0.0634635 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.145 mas, bmaj=1.705 mas, bpa=-79.98 degrees ! Estimated noise=0.354614 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000177934 Jy ! Component: 100 - total flux cleaned = -7.04547e-05 Jy ! Component: 150 - total flux cleaned = 2.32016e-05 Jy ! Component: 200 - total flux cleaned = 0.000143679 Jy ! Total flux subtracted in 200 components = 0.000143679 Jy ! Clean residual min=-0.000682 max=0.000612 Jy/beam ! Clean residual mean=0.000001 rms=0.000154 Jy/beam ! Combined flux in latest and established models = 0.0636072 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 131 components and 0.0636072 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051226Jy sigma=0.435916 ! Fit after self-cal, rms=0.051212Jy sigma=0.435853 wmodel J1358+8340_X_a_map.mod ! Writing 131 model components to file: J1358+8340_X_a_map.mod wobs J1358+8340_X_a_uvs.fits ! Writing UV FITS file: J1358+8340_X_a_uvs.fits wwins J1358+8340_X_a_map.win ! wwins: Wrote 5 windows to J1358+8340_X_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00011283 Jy ! Component: 100 - total flux cleaned = -0.000113215 Jy ! Component: 150 - total flux cleaned = -9.1495e-05 Jy ! Component: 200 - total flux cleaned = -4.93415e-05 Jy ! Component: 250 - total flux cleaned = -1.84937e-05 Jy ! Component: 300 - total flux cleaned = 1.1667e-05 Jy ! Component: 350 - total flux cleaned = 6.10943e-05 Jy ! Component: 400 - total flux cleaned = 9.99968e-05 Jy ! Component: 450 - total flux cleaned = 0.000128775 Jy ! Component: 500 - total flux cleaned = 0.000147767 Jy ! Component: 550 - total flux cleaned = 0.000185137 Jy ! Component: 600 - total flux cleaned = 0.000194398 Jy ! Component: 650 - total flux cleaned = 0.000240151 Jy ! Component: 700 - total flux cleaned = 0.000294148 Jy ! Component: 750 - total flux cleaned = 0.000347602 Jy ! Component: 800 - total flux cleaned = 0.000356442 Jy ! Component: 850 - total flux cleaned = 0.0004002 Jy ! Component: 900 - total flux cleaned = 0.000426206 Jy ! Component: 950 - total flux cleaned = 0.000460649 Jy ! Component: 1000 - total flux cleaned = 0.000477656 Jy ! Component: 1050 - total flux cleaned = 0.000494438 Jy ! Component: 1100 - total flux cleaned = 0.000486249 Jy ! Component: 1150 - total flux cleaned = 0.000519421 Jy ! Component: 1200 - total flux cleaned = 0.000535789 Jy ! Component: 1250 - total flux cleaned = 0.000503135 Jy ! Component: 1300 - total flux cleaned = 0.0005517 Jy ! Component: 1350 - total flux cleaned = 0.000511476 Jy ! Component: 1400 - total flux cleaned = 0.000511518 Jy ! Component: 1450 - total flux cleaned = 0.000527354 Jy ! Component: 1500 - total flux cleaned = 0.000519516 Jy ! Component: 1550 - total flux cleaned = 0.000542936 Jy ! Component: 1600 - total flux cleaned = 0.000550635 Jy ! Component: 1650 - total flux cleaned = 0.000535234 Jy ! Component: 1700 - total flux cleaned = 0.000527662 Jy ! Component: 1750 - total flux cleaned = 0.000519965 Jy ! Component: 1800 - total flux cleaned = 0.000565354 Jy ! Component: 1850 - total flux cleaned = 0.000520208 Jy ! Component: 1900 - total flux cleaned = 0.000535158 Jy ! Component: 1950 - total flux cleaned = 0.0005278 Jy ! Component: 2000 - total flux cleaned = 0.000542521 Jy ! Component: 2050 - total flux cleaned = 0.000542536 Jy ! Component: 2100 - total flux cleaned = 0.000520684 Jy ! Component: 2150 - total flux cleaned = 0.000556938 Jy ! Component: 2200 - total flux cleaned = 0.000520931 Jy ! Component: 2250 - total flux cleaned = 0.000528118 Jy ! Component: 2300 - total flux cleaned = 0.00052101 Jy ! Component: 2350 - total flux cleaned = 0.000549389 Jy ! Component: 2400 - total flux cleaned = 0.000535352 Jy ! Component: 2450 - total flux cleaned = 0.000556371 Jy ! Component: 2500 - total flux cleaned = 0.000549412 Jy ! Component: 2550 - total flux cleaned = 0.000542447 Jy ! Component: 2600 - total flux cleaned = 0.000542507 Jy ! Component: 2650 - total flux cleaned = 0.000563069 Jy ! Component: 2700 - total flux cleaned = 0.000576755 Jy ! Component: 2750 - total flux cleaned = 0.000583584 Jy ! Component: 2800 - total flux cleaned = 0.00059711 Jy ! Component: 2850 - total flux cleaned = 0.000563505 Jy ! Component: 2900 - total flux cleaned = 0.000583609 Jy ! Component: 2950 - total flux cleaned = 0.000636815 Jy ! Component: 3000 - total flux cleaned = 0.000643458 Jy ! Component: 3050 - total flux cleaned = 0.000610425 Jy ! Component: 3100 - total flux cleaned = 0.000610381 Jy ! Component: 3150 - total flux cleaned = 0.000649518 Jy ! Component: 3200 - total flux cleaned = 0.000643007 Jy ! Component: 3250 - total flux cleaned = 0.000636555 Jy ! Component: 3300 - total flux cleaned = 0.000655932 Jy ! Component: 3350 - total flux cleaned = 0.000662293 Jy ! Component: 3400 - total flux cleaned = 0.000700535 Jy ! Component: 3450 - total flux cleaned = 0.000694144 Jy ! Component: 3500 - total flux cleaned = 0.000700429 Jy ! Component: 3550 - total flux cleaned = 0.000687858 Jy ! Component: 3600 - total flux cleaned = 0.000737961 Jy ! Component: 3650 - total flux cleaned = 0.000750417 Jy ! Component: 3700 - total flux cleaned = 0.000744209 Jy ! Component: 3750 - total flux cleaned = 0.000756538 Jy ! Component: 3800 - total flux cleaned = 0.000774993 Jy ! Component: 3850 - total flux cleaned = 0.000793331 Jy ! Component: 3900 - total flux cleaned = 0.000781152 Jy ! Component: 3950 - total flux cleaned = 0.000787197 Jy ! Component: 4000 - total flux cleaned = 0.000799294 Jy ! Component: 4050 - total flux cleaned = 0.000823422 Jy ! Total flux subtracted in 4096 components = 0.00085942 Jy ! Clean residual min=-0.000414 max=0.000340 Jy/beam ! Clean residual mean=0.000000 rms=0.000107 Jy/beam ! Combined flux in latest and established models = 0.0644666 Jy keep ! Adding 345 model components to the UV plane model. ! The established model now contains 476 components and 0.0644666 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uvm//J1358+8340_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.145 x 1.705 at -79.98 degrees (North through East) ! Clean map min=-0.00054972 max=0.031989 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uvm//J1358+8340_X_a_map.fits wmodel /image_prod/ug002_uvm//J1358+8340_X_a_map.mod ! Writing 476 model components to file: /image_prod/ug002_uvm//J1358+8340_X_a_map.mod wobs /image_prod/ug002_uvm//J1358+8340_X_a_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uvm//J1358+8340_X_a_uvs.fits wwins /image_prod/ug002_uvm//J1358+8340_X_a_map.win ! wwins: Wrote 6 windows to /image_prod/ug002_uvm//J1358+8340_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0319888 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000106545 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.999212 0.999212 1.99842 3.99685 7.99369 15.9874 31.9748 63.9496 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.031 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 300.236 quit ! Quitting program ! Log file /image_prod/ug002_uvm//J1358+8340_X_a_dfm.log closed on Wed Mar 4 17:16:35 2020