! Started logfile: /image_prod/ug002_uvm//J1357-1527_X_a_dfm.log on Wed Mar 4 17:16:10 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uvm//J1357-1527_X_a_uvm.fits ! Reading UV FITS file: /image_prod/ug002_uvm//J1357-1527_X_a_uvm.fits ! AN table 1: 24 integrations on 36 of 36 possible baselines. ! AN table 2: 6 integrations on 28 of 28 possible baselines. ! AN table 3: 20 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.90735 visibilities/baseline/integration-bin. ! Found source: J1357-1527 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 121 lines of history. ! ! Reading 21036 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1357-1527_X_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 10 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 9 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 10 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 9 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 10 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 9 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 10 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 9 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 5. ! A total of 10 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 9 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 6. ! A total of 10 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 9 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 7. ! A total of 10 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 9 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 8. ! A total of 10 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 9 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 9. ! A total of 10 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 9 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 10. ! A total of 10 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 9 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 11. ! A total of 10 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 9 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 12. ! A total of 10 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 9 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=1.058773Jy sigma=11.245419 ! Fit after self-cal, rms=0.669574Jy sigma=7.084409 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6254 mas, bmaj=1.797 mas, bpa=-8.861 degrees ! Estimated noise=0.890543 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.246537 Jy ! Component: 100 - total flux cleaned = 0.304065 Jy ! Total flux subtracted in 100 components = 0.304065 Jy ! Clean residual min=-0.009443 max=0.022335 Jy/beam ! Clean residual mean=-0.000008 rms=0.002049 Jy/beam ! Combined flux in latest and established models = 0.304065 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.304065 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.089859Jy sigma=0.919378 ! Fit after self-cal, rms=0.089852Jy sigma=0.919286 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0236135 Jy ! Component: 100 - total flux cleaned = 0.0359341 Jy ! Total flux subtracted in 100 components = 0.0359341 Jy ! Clean residual min=-0.007133 max=0.014698 Jy/beam ! Clean residual mean=-0.000006 rms=0.001560 Jy/beam ! Combined flux in latest and established models = 0.339999 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 10 components and 0.339999 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.079733Jy sigma=0.800837 ! Fit after self-cal, rms=0.079729Jy sigma=0.800734 ! Inverting map ! Added new window around map position (1.6, 0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0131221 Jy ! Component: 100 - total flux cleaned = 0.020508 Jy ! Total flux subtracted in 100 components = 0.020508 Jy ! Clean residual min=-0.006990 max=0.012230 Jy/beam ! Clean residual mean=-0.000005 rms=0.001353 Jy/beam ! Combined flux in latest and established models = 0.360507 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 24 components and 0.360507 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075988Jy sigma=0.758244 ! Fit after self-cal, rms=0.075710Jy sigma=0.754593 ! Inverting map ! Added new window around map position (-1.6, -0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00914165 Jy ! Component: 100 - total flux cleaned = 0.0152632 Jy ! Total flux subtracted in 100 components = 0.0152632 Jy ! Clean residual min=-0.006796 max=0.005379 Jy/beam ! Clean residual mean=-0.000004 rms=0.001205 Jy/beam ! Combined flux in latest and established models = 0.37577 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 41 components and 0.37577 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073685Jy sigma=0.730757 ! Fit after self-cal, rms=0.073664Jy sigma=0.730473 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8579 mas, bmaj=2.401 mas, bpa=-10.58 degrees ! Estimated noise=0.489219 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0100387 Jy ! Component: 100 - total flux cleaned = 0.0168122 Jy ! Component: 150 - total flux cleaned = 0.021641 Jy ! Component: 200 - total flux cleaned = 0.0251603 Jy ! Total flux subtracted in 200 components = 0.0251603 Jy ! Clean residual min=-0.007311 max=0.006384 Jy/beam ! Clean residual mean=-0.000006 rms=0.001576 Jy/beam ! Combined flux in latest and established models = 0.400931 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 71 components and 0.400931 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072111Jy sigma=0.710941 ! Fit after self-cal, rms=0.072109Jy sigma=0.710871 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8579 x 2.401 at -10.57 degrees (North through East) ! Clean map min=-0.0070657 max=0.32444 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.02 HN 1.00 KP 1.06 ! LA 1.01 MK 1.01 NL 1.04 OV 0.90 ! PT 0.87 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 0.99 HN 0.97 KP 1.06 ! LA 1.04 MK 1.08 NL 1.42 OV 0.91 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.97 FD 1.03 HN 1.00 KP 1.06 ! LA 1.01 MK 1.00 NL 0.99 OV 0.97 ! PT 0.89 SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.03 HN 1.00 KP 1.05 ! LA 1.00 MK 0.99 NL 1.05 OV 0.90 ! PT 0.88 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 FD 1.02 HN 0.99 KP 1.04 ! LA 1.02 MK 1.07 NL 1.39 OV 0.94 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.96 FD 1.01 HN 0.99 KP 1.09 ! LA 1.00 MK 0.99 NL 1.00 OV 0.96 ! PT 0.88 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.02 HN 1.03 KP 1.04 ! LA 1.00 MK 0.99 NL 1.06 OV 0.91 ! PT 0.88 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.01 HN 1.02 KP 1.04 ! LA 1.01 MK 1.08 NL 1.38 OV 0.94 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 1.02 HN 0.99 KP 1.07 ! LA 1.01 MK 0.97 NL 0.99 OV 0.96 ! PT 0.89 SC 1.04 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.99 HN 0.98 KP 1.07 ! LA 1.01 MK 1.02 NL 1.05 OV 0.91 ! PT 0.89 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.08 HN 0.93 KP 1.08 ! LA 1.02 MK 1.09 NL 1.34 OV 0.90 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 0.99 HN 0.98 KP 1.08 ! LA 1.00 MK 0.99 NL 1.01 OV 0.97 ! PT 0.90 SC 1.01 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.01 HN 1.03 KP 1.05 ! LA 1.02 MK 1.02 NL 1.04 OV 0.90 ! PT 0.83 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 1.05 HN 0.93 KP 1.07 ! LA 1.02 MK 1.06 NL 1.52 OV 0.91 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 1.01 HN 1.02 KP 1.07 ! LA 0.99 MK 0.95 NL 1.01 OV 0.98 ! PT 0.89 SC 1.01 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.02 HN 1.02 KP 1.05 ! LA 1.00 MK 1.01 NL 1.07 OV 0.90 ! PT 0.89 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.04 HN 1.01 KP 1.06 ! LA 1.04 MK 1.07 NL 1.50 OV 0.93 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 1.02 HN 1.00 KP 1.06 ! LA 1.02 MK 0.98 NL 1.00 OV 1.00 ! PT 0.87 SC 1.01 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.01 HN 0.97 KP 1.06 ! LA 1.01 MK 1.02 NL 1.07 OV 0.93 ! PT 0.88 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 1.06 HN 0.99 KP 1.07 ! LA 1.09 MK 1.07 NL 1.49 OV 0.87 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 1.01 HN 1.00 KP 1.05 ! LA 1.03 MK 0.97 NL 0.99 OV 0.96 ! PT 0.91 SC 1.03 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.01 HN 1.02 KP 1.07 ! LA 1.01 MK 1.01 NL 1.06 OV 0.92 ! PT 0.89 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 1.00 HN 0.95 KP 1.04 ! LA 1.05 MK 1.09 NL 1.36 OV 0.91 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.97 FD 1.02 HN 1.03 KP 1.09 ! LA 1.01 MK 0.97 NL 0.99 OV 0.98 ! PT 0.90 SC 1.04 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.05 HN 1.03 KP 1.06 ! LA 1.02 MK 1.01 NL 1.04 OV 0.91 ! PT 0.90 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 1.04 HN 0.94 KP 1.05 ! LA 1.06 MK 1.02 NL 1.37 OV 0.94 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.95 FD 1.01 HN 1.01 KP 1.04 ! LA 1.00 MK 1.00 NL 1.02 OV 0.96 ! PT 0.93 SC 1.03 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.01 HN 0.98 KP 1.08 ! LA 1.00 MK 1.00 NL 1.06 OV 0.89 ! PT 0.90 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.06 HN 0.91 KP 1.08 ! LA 1.07 MK 1.08 NL 1.58 OV 0.88 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 1.02 HN 1.01 KP 1.07 ! LA 1.01 MK 0.97 NL 0.99 OV 0.97 ! PT 0.90 SC 1.02 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.01 HN 1.03 KP 1.08 ! LA 1.02 MK 1.03 NL 1.04 OV 0.89 ! PT 0.93 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.04 FD 1.02 HN 1.05 KP 1.02 ! LA 1.05 MK 1.07 NL 1.44 OV 0.88 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.97 FD 1.03 HN 0.99 KP 1.07 ! LA 1.01 MK 0.97 NL 1.00 OV 1.00 ! PT 0.92 SC 1.04 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.02 HN 1.01 KP 1.08 ! LA 1.02 MK 1.02 NL 1.05 OV 0.90 ! PT 0.89 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 1.05 HN 1.04 KP 0.93 ! LA 1.08 MK 1.09 NL 1.63 OV 0.87 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 1.03 HN 1.02 KP 1.07 ! LA 1.03 MK 0.99 NL 0.99 OV 0.98 ! PT 0.90 SC 1.05 ! ! ! Fit before self-cal, rms=0.072109Jy sigma=0.710871 ! Fit after self-cal, rms=0.066911Jy sigma=0.638419 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8622 mas, bmaj=2.411 mas, bpa=-10.53 degrees ! Estimated noise=0.487439 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00423356 Jy ! Component: 100 - total flux cleaned = -0.0064958 Jy ! Component: 150 - total flux cleaned = -0.00762313 Jy ! Component: 200 - total flux cleaned = -0.00824579 Jy ! Total flux subtracted in 200 components = -0.00824579 Jy ! Clean residual min=-0.003361 max=0.002924 Jy/beam ! Clean residual mean=-0.000006 rms=0.000661 Jy/beam ! Combined flux in latest and established models = 0.392685 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 87 components and 0.392685 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066586Jy sigma=0.635821 ! Fit after self-cal, rms=0.066629Jy sigma=0.635662 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066629Jy sigma=0.635662 ! Fit after self-cal, rms=0.066064Jy sigma=0.619451 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8625 mas, bmaj=2.411 mas, bpa=-10.57 degrees ! Estimated noise=0.487642 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00238166 Jy ! Component: 100 - total flux cleaned = -0.00339515 Jy ! Component: 150 - total flux cleaned = -0.00386453 Jy ! Component: 200 - total flux cleaned = -0.00408989 Jy ! Total flux subtracted in 200 components = -0.00408989 Jy ! Clean residual min=-0.002619 max=0.002729 Jy/beam ! Clean residual mean=-0.000003 rms=0.000511 Jy/beam ! Combined flux in latest and established models = 0.388595 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 91 components and 0.388595 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065950Jy sigma=0.618290 ! Fit after self-cal, rms=0.065967Jy sigma=0.618256 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.6, 6.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0024422 Jy ! Component: 100 - total flux cleaned = 0.0028658 Jy ! Component: 150 - total flux cleaned = 0.00286247 Jy ! Component: 200 - total flux cleaned = 0.00289841 Jy ! Total flux subtracted in 200 components = 0.00289841 Jy ! Clean residual min=-0.002332 max=0.002152 Jy/beam ! Clean residual mean=-0.000004 rms=0.000458 Jy/beam ! Combined flux in latest and established models = 0.391493 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 117 components and 0.391493 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065852Jy sigma=0.616907 ! Fit after self-cal, rms=0.065843Jy sigma=0.616799 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065843Jy sigma=0.616799 ! Fit after self-cal, rms=0.065850Jy sigma=0.616262 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8629 mas, bmaj=2.41 mas, bpa=-10.54 degrees ! Estimated noise=0.487457 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00127638 Jy ! Component: 100 - total flux cleaned = -0.00143174 Jy ! Component: 150 - total flux cleaned = -0.00139319 Jy ! Component: 200 - total flux cleaned = -0.00135739 Jy ! Total flux subtracted in 200 components = -0.00135739 Jy ! Clean residual min=-0.002174 max=0.001968 Jy/beam ! Clean residual mean=-0.000004 rms=0.000412 Jy/beam ! Combined flux in latest and established models = 0.390136 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 125 components and 0.390136 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065780Jy sigma=0.615544 ! Fit after self-cal, rms=0.065779Jy sigma=0.615526 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000287927 Jy ! Component: 100 - total flux cleaned = 0.000258119 Jy ! Component: 150 - total flux cleaned = 0.000175376 Jy ! Component: 200 - total flux cleaned = 0.000124658 Jy ! Total flux subtracted in 200 components = 0.000124658 Jy ! Clean residual min=-0.002116 max=0.001923 Jy/beam ! Clean residual mean=-0.000004 rms=0.000405 Jy/beam ! Combined flux in latest and established models = 0.390261 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 136 components and 0.390261 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065753Jy sigma=0.615306 ! Fit after self-cal, rms=0.065753Jy sigma=0.615296 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065753Jy sigma=0.615296 ! Fit after self-cal, rms=0.065780Jy sigma=0.615030 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.168 mas, bmaj=4.49 mas, bpa=-1.202 degrees ! Estimated noise=0.614385 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00136398 Jy ! Component: 100 - total flux cleaned = -0.00156891 Jy ! Component: 150 - total flux cleaned = -0.00157311 Jy ! Component: 200 - total flux cleaned = -0.00152955 Jy ! Total flux subtracted in 200 components = -0.00152955 Jy ! Clean residual min=-0.002798 max=0.002063 Jy/beam ! Clean residual mean=-0.000006 rms=0.000527 Jy/beam ! Combined flux in latest and established models = 0.388731 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 148 components and 0.388731 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065753Jy sigma=0.614887 ! Fit after self-cal, rms=0.065752Jy sigma=0.614865 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.16937e-05 Jy ! Component: 100 - total flux cleaned = 0.000219717 Jy ! Component: 150 - total flux cleaned = 0.000233562 Jy ! Component: 200 - total flux cleaned = 0.000246479 Jy ! Total flux subtracted in 200 components = 0.000246479 Jy ! Clean residual min=-0.002717 max=0.002070 Jy/beam ! Clean residual mean=-0.000006 rms=0.000518 Jy/beam ! Combined flux in latest and established models = 0.388978 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 156 components and 0.388978 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065742Jy sigma=0.614807 ! Fit after self-cal, rms=0.065742Jy sigma=0.614796 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8631 mas, bmaj=2.408 mas, bpa=-10.52 degrees ! Estimated noise=0.487275 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8631 x 2.408 at -10.52 degrees (North through East) ! Clean map min=-0.0018279 max=0.32484 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6279 mas, bmaj=1.8 mas, bpa=-8.791 degrees ! Estimated noise=0.895214 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.247771 Jy ! Component: 100 - total flux cleaned = 0.304926 Jy ! Component: 150 - total flux cleaned = 0.32808 Jy ! Component: 200 - total flux cleaned = 0.340571 Jy ! Total flux subtracted in 200 components = 0.340571 Jy ! Clean residual min=-0.003727 max=0.006429 Jy/beam ! Clean residual mean=-0.000003 rms=0.000852 Jy/beam ! Combined flux in latest and established models = 0.340571 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.340571 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8631 mas, bmaj=2.408 mas, bpa=-10.52 degrees ! Estimated noise=0.487275 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.014155 Jy ! Component: 100 - total flux cleaned = 0.0227611 Jy ! Component: 150 - total flux cleaned = 0.0283952 Jy ! Component: 200 - total flux cleaned = 0.0325857 Jy ! Total flux subtracted in 200 components = 0.0325857 Jy ! Clean residual min=-0.002728 max=0.003101 Jy/beam ! Clean residual mean=-0.000004 rms=0.000577 Jy/beam ! Combined flux in latest and established models = 0.373156 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 50 components and 0.373156 Jy ! Inverting map ! Added new window around map position (1.4, 3.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00346941 Jy ! Component: 100 - total flux cleaned = 0.00615993 Jy ! Component: 150 - total flux cleaned = 0.00834312 Jy ! Component: 200 - total flux cleaned = 0.00979911 Jy ! Total flux subtracted in 200 components = 0.00979911 Jy ! Clean residual min=-0.002303 max=0.001914 Jy/beam ! Clean residual mean=-0.000004 rms=0.000415 Jy/beam ! Combined flux in latest and established models = 0.382955 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 83 components and 0.382955 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.168 mas, bmaj=4.49 mas, bpa=-1.202 degrees ! Estimated noise=0.614385 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00223305 Jy ! Component: 100 - total flux cleaned = 0.0036519 Jy ! Component: 150 - total flux cleaned = 0.00433921 Jy ! Component: 200 - total flux cleaned = 0.0047605 Jy ! Total flux subtracted in 200 components = 0.0047605 Jy ! Clean residual min=-0.002382 max=0.001902 Jy/beam ! Clean residual mean=-0.000006 rms=0.000507 Jy/beam ! Combined flux in latest and established models = 0.387716 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000359423 Jy ! Component: 100 - total flux cleaned = 0.000654881 Jy ! Component: 150 - total flux cleaned = 0.000869418 Jy ! Component: 200 - total flux cleaned = 0.000969074 Jy ! Total flux subtracted in 200 components = 0.000969074 Jy ! Clean residual min=-0.002393 max=0.001959 Jy/beam ! Clean residual mean=-0.000006 rms=0.000499 Jy/beam ! Combined flux in latest and established models = 0.388685 Jy ! Adding 64 model components to the UV plane model. ! The established model now contains 132 components and 0.388685 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8631 mas, bmaj=2.408 mas, bpa=-10.52 degrees ! Estimated noise=0.487275 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000505445 Jy ! Component: 100 - total flux cleaned = -0.000476175 Jy ! Component: 150 - total flux cleaned = -0.000447198 Jy ! Component: 200 - total flux cleaned = -0.000419645 Jy ! Total flux subtracted in 200 components = -0.000419645 Jy ! Clean residual min=-0.002001 max=0.001670 Jy/beam ! Clean residual mean=-0.000004 rms=0.000368 Jy/beam ! Combined flux in latest and established models = 0.388265 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 152 components and 0.388265 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065705Jy sigma=0.614489 ! Fit after self-cal, rms=0.065702Jy sigma=0.614444 wmodel J1357-1527_X_a_map.mod ! Writing 152 model components to file: J1357-1527_X_a_map.mod wobs J1357-1527_X_a_uvs.fits ! Writing UV FITS file: J1357-1527_X_a_uvs.fits wwins J1357-1527_X_a_map.win ! wwins: Wrote 5 windows to J1357-1527_X_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000440847 Jy ! Component: 100 - total flux cleaned = -0.000724562 Jy ! Component: 150 - total flux cleaned = -0.00101337 Jy ! Component: 200 - total flux cleaned = -0.00128553 Jy ! Component: 250 - total flux cleaned = -0.00147361 Jy ! Component: 300 - total flux cleaned = -0.00160985 Jy ! Component: 350 - total flux cleaned = -0.00169806 Jy ! Component: 400 - total flux cleaned = -0.00174146 Jy ! Component: 450 - total flux cleaned = -0.00182449 Jy ! Component: 500 - total flux cleaned = -0.00180415 Jy ! Component: 550 - total flux cleaned = -0.00184389 Jy ! Component: 600 - total flux cleaned = -0.0019215 Jy ! Component: 650 - total flux cleaned = -0.00192129 Jy ! Component: 700 - total flux cleaned = -0.00197763 Jy ! Component: 750 - total flux cleaned = -0.00199633 Jy ! Component: 800 - total flux cleaned = -0.00203293 Jy ! Component: 850 - total flux cleaned = -0.00206865 Jy ! Component: 900 - total flux cleaned = -0.00206833 Jy ! Component: 950 - total flux cleaned = -0.00206831 Jy ! Component: 1000 - total flux cleaned = -0.00208553 Jy ! Component: 1050 - total flux cleaned = -0.00211983 Jy ! Component: 1100 - total flux cleaned = -0.00217017 Jy ! Component: 1150 - total flux cleaned = -0.00218666 Jy ! Component: 1200 - total flux cleaned = -0.00223609 Jy ! Component: 1250 - total flux cleaned = -0.00223598 Jy ! Component: 1300 - total flux cleaned = -0.00225205 Jy ! Component: 1350 - total flux cleaned = -0.00228384 Jy ! Component: 1400 - total flux cleaned = -0.0022524 Jy ! Component: 1450 - total flux cleaned = -0.00226806 Jy ! Component: 1500 - total flux cleaned = -0.00222185 Jy ! Component: 1550 - total flux cleaned = -0.00226762 Jy ! Component: 1600 - total flux cleaned = -0.00223735 Jy ! Component: 1650 - total flux cleaned = -0.00229735 Jy ! Component: 1700 - total flux cleaned = -0.00228234 Jy ! Component: 1750 - total flux cleaned = -0.0022823 Jy ! Component: 1800 - total flux cleaned = -0.00229715 Jy ! Component: 1850 - total flux cleaned = -0.00231172 Jy ! Component: 1900 - total flux cleaned = -0.00231184 Jy ! Component: 1950 - total flux cleaned = -0.00232618 Jy ! Component: 2000 - total flux cleaned = -0.00234021 Jy ! Component: 2050 - total flux cleaned = -0.00231211 Jy ! Component: 2100 - total flux cleaned = -0.00236798 Jy ! Component: 2150 - total flux cleaned = -0.00231257 Jy ! Component: 2200 - total flux cleaned = -0.00229894 Jy ! Component: 2250 - total flux cleaned = -0.00235354 Jy ! Component: 2300 - total flux cleaned = -0.00234011 Jy ! Component: 2350 - total flux cleaned = -0.00236703 Jy ! Component: 2400 - total flux cleaned = -0.00235367 Jy ! Component: 2450 - total flux cleaned = -0.00236693 Jy ! Component: 2500 - total flux cleaned = -0.00235374 Jy ! Component: 2550 - total flux cleaned = -0.00241908 Jy ! Component: 2600 - total flux cleaned = -0.00241906 Jy ! Component: 2650 - total flux cleaned = -0.00245781 Jy ! Component: 2700 - total flux cleaned = -0.00249611 Jy ! Component: 2750 - total flux cleaned = -0.00252142 Jy ! Component: 2800 - total flux cleaned = -0.00253407 Jy ! Component: 2850 - total flux cleaned = -0.0025718 Jy ! Component: 2900 - total flux cleaned = -0.0026092 Jy ! Component: 2950 - total flux cleaned = -0.00265895 Jy ! Component: 3000 - total flux cleaned = -0.00270813 Jy ! Component: 3050 - total flux cleaned = -0.00273261 Jy ! Component: 3100 - total flux cleaned = -0.00272063 Jy ! Component: 3150 - total flux cleaned = -0.00280531 Jy ! Component: 3200 - total flux cleaned = -0.00285323 Jy ! Component: 3250 - total flux cleaned = -0.00286521 Jy ! Component: 3300 - total flux cleaned = -0.00287712 Jy ! Component: 3350 - total flux cleaned = -0.002948 Jy ! Component: 3400 - total flux cleaned = -0.00297144 Jy ! Component: 3450 - total flux cleaned = -0.00301814 Jy ! Component: 3500 - total flux cleaned = -0.00302968 Jy ! Component: 3550 - total flux cleaned = -0.00308745 Jy ! Component: 3600 - total flux cleaned = -0.00312193 Jy ! Component: 3650 - total flux cleaned = -0.00312185 Jy ! Component: 3700 - total flux cleaned = -0.00311053 Jy ! Component: 3750 - total flux cleaned = -0.00314436 Jy ! Component: 3800 - total flux cleaned = -0.00315556 Jy ! Component: 3850 - total flux cleaned = -0.00313313 Jy ! Component: 3900 - total flux cleaned = -0.00317766 Jy ! Component: 3950 - total flux cleaned = -0.00314437 Jy ! Component: 4000 - total flux cleaned = -0.00319948 Jy ! Component: 4050 - total flux cleaned = -0.00321045 Jy ! Total flux subtracted in 4096 components = -0.00319945 Jy ! Clean residual min=-0.000723 max=0.000605 Jy/beam ! Clean residual mean=-0.000001 rms=0.000197 Jy/beam ! Combined flux in latest and established models = 0.385066 Jy keep ! Adding 330 model components to the UV plane model. ! The established model now contains 482 components and 0.385066 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uvm//J1357-1527_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8631 x 2.408 at -10.52 degrees (North through East) ! Clean map min=-0.0011467 max=0.32624 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uvm//J1357-1527_X_a_map.fits wmodel /image_prod/ug002_uvm//J1357-1527_X_a_map.mod ! Writing 482 model components to file: /image_prod/ug002_uvm//J1357-1527_X_a_map.mod wobs /image_prod/ug002_uvm//J1357-1527_X_a_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uvm//J1357-1527_X_a_uvs.fits wwins /image_prod/ug002_uvm//J1357-1527_X_a_map.win ! wwins: Wrote 6 windows to /image_prod/ug002_uvm//J1357-1527_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.326241 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000194289 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.178661 0.178661 0.357322 0.714645 1.42929 2.85858 5.71716 11.4343 22.8686 45.7373 91.4745 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.326 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1679.16 quit ! Quitting program ! Log file /image_prod/ug002_uvm//J1357-1527_X_a_dfm.log closed on Wed Mar 4 17:16:16 2020