! Started logfile: /image_prod/ug002_uvm//J1353+6324_X_a_dfm.log on Wed Mar 4 17:15:36 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uvm//J1353+6324_X_a_uvm.fits ! Reading UV FITS file: /image_prod/ug002_uvm//J1353+6324_X_a_uvm.fits ! AN table 1: 150 integrations on 28 of 28 possible baselines. ! AN table 2: 75 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.880924 visibilities/baseline/integration-bin. ! Found source: J1353+6324 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 108 lines of history. ! ! Reading 80076 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1353+6324_X_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 100 telescope corrections were flagged in sub-array 1. ! A total of 25 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 100 telescope corrections were flagged in sub-array 1. ! A total of 25 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 100 telescope corrections were flagged in sub-array 1. ! A total of 25 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 100 telescope corrections were flagged in sub-array 1. ! A total of 25 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 100 telescope corrections were flagged in sub-array 1. ! A total of 25 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 100 telescope corrections were flagged in sub-array 1. ! A total of 25 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 100 telescope corrections were flagged in sub-array 1. ! A total of 25 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 100 telescope corrections were flagged in sub-array 1. ! A total of 25 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 9. ! A total of 100 telescope corrections were flagged in sub-array 1. ! A total of 25 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 10. ! A total of 100 telescope corrections were flagged in sub-array 1. ! A total of 25 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 11. ! A total of 100 telescope corrections were flagged in sub-array 1. ! A total of 25 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 12. ! A total of 100 telescope corrections were flagged in sub-array 1. ! A total of 25 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.002242Jy sigma=9.136125 ! Fit after self-cal, rms=0.959256Jy sigma=8.724741 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7408 mas, bmaj=0.9143 mas, bpa=34.21 degrees ! Estimated noise=0.694069 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0279056 Jy ! Component: 100 - total flux cleaned = 0.0376884 Jy ! Total flux subtracted in 100 components = 0.0376884 Jy ! Clean residual min=-0.002289 max=0.007188 Jy/beam ! Clean residual mean=-0.000002 rms=0.000611 Jy/beam ! Combined flux in latest and established models = 0.0376884 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0376884 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059784Jy sigma=0.515448 ! Fit after self-cal, rms=0.058558Jy sigma=0.504901 ! Inverting map ! Added new window around map position (-0.4, -1.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00856702 Jy ! Component: 100 - total flux cleaned = 0.0143773 Jy ! Total flux subtracted in 100 components = 0.0143773 Jy ! Clean residual min=-0.002107 max=0.006138 Jy/beam ! Clean residual mean=-0.000001 rms=0.000511 Jy/beam ! Combined flux in latest and established models = 0.0520656 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 20 components and 0.0520656 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056414Jy sigma=0.480600 ! Fit after self-cal, rms=0.056219Jy sigma=0.478742 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00584703 Jy ! Component: 100 - total flux cleaned = 0.00982479 Jy ! Total flux subtracted in 100 components = 0.00982479 Jy ! Clean residual min=-0.001782 max=0.004559 Jy/beam ! Clean residual mean=-0.000001 rms=0.000440 Jy/beam ! Combined flux in latest and established models = 0.0618904 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 24 components and 0.0618904 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055186Jy sigma=0.466960 ! Fit after self-cal, rms=0.055059Jy sigma=0.465731 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0041533 Jy ! Component: 100 - total flux cleaned = 0.00697442 Jy ! Total flux subtracted in 100 components = 0.00697442 Jy ! Clean residual min=-0.001761 max=0.003648 Jy/beam ! Clean residual mean=-0.000001 rms=0.000400 Jy/beam ! Combined flux in latest and established models = 0.0688648 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 29 components and 0.0688648 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054533Jy sigma=0.459716 ! Fit after self-cal, rms=0.054471Jy sigma=0.459089 ! Inverting map ! Added new window around map position (0.4, 1.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00342999 Jy ! Component: 100 - total flux cleaned = 0.00573347 Jy ! Total flux subtracted in 100 components = 0.00573347 Jy ! Clean residual min=-0.001713 max=0.002365 Jy/beam ! Clean residual mean=-0.000001 rms=0.000372 Jy/beam ! Combined flux in latest and established models = 0.0745983 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 34 components and 0.0745983 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054140Jy sigma=0.455386 ! Fit after self-cal, rms=0.054106Jy sigma=0.455092 ! Inverting map ! Added new window around map position (-1, -0.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00260828 Jy ! Component: 100 - total flux cleaned = 0.00446943 Jy ! Total flux subtracted in 100 components = 0.00446943 Jy ! Clean residual min=-0.001687 max=0.001582 Jy/beam ! Clean residual mean=-0.000001 rms=0.000358 Jy/beam ! Combined flux in latest and established models = 0.0790677 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 40 components and 0.0790677 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053927Jy sigma=0.453116 ! Fit after self-cal, rms=0.053908Jy sigma=0.452952 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9753 mas, bmaj=1.259 mas, bpa=37.75 degrees ! Estimated noise=0.278808 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00254424 Jy ! Component: 100 - total flux cleaned = 0.00416959 Jy ! Component: 150 - total flux cleaned = 0.00528496 Jy ! Component: 200 - total flux cleaned = 0.00609224 Jy ! Total flux subtracted in 200 components = 0.00609224 Jy ! Clean residual min=-0.001256 max=0.001324 Jy/beam ! Clean residual mean=-0.000001 rms=0.000283 Jy/beam ! Combined flux in latest and established models = 0.08516 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 50 components and 0.08516 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053776Jy sigma=0.451547 ! Fit after self-cal, rms=0.053758Jy sigma=0.451359 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9753 x 1.259 at 37.75 degrees (North through East) ! Clean map min=-0.0012296 max=0.039118 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.93 HN 0.96 KP 1.01 ! MK 1.14 NL 1.19 OV 0.91 SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.96 FD 0.99 HN 1.02 KP 0.97 ! LA 0.98 MK 1.06 NL 1.02 OV 1.05 ! PT 0.98 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.97 HN 1.00 KP 1.02 ! MK 1.01 NL 1.28 OV 0.93 SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 1.01 HN 0.98 KP 0.99 ! LA 0.96 MK 1.08 NL 0.98 OV 1.03 ! PT 0.95 SC 0.92 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.01 HN 0.99 KP 1.04 ! MK 1.03 NL 1.21 OV 0.90 SC 1.04 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.02 HN 0.92 KP 1.02 ! LA 0.94 MK 1.14 NL 1.06 OV 1.00 ! PT 0.95 SC 0.93 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.97 HN 1.01 KP 1.07 ! MK 1.09 NL 1.13 OV 0.94 SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 0.99 HN 0.94 KP 0.97 ! LA 0.99 MK 1.07 NL 1.00 OV 1.01 ! PT 1.02 SC 0.98 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.98 HN 0.99 KP 1.02 ! MK 1.06 NL 1.14 OV 0.93 SC 1.06 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.03 HN 0.91 KP 1.00 ! LA 0.97 MK 1.05 NL 0.96 OV 1.01 ! PT 0.95 SC 1.03 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.97 HN 0.98 KP 1.01 ! MK 1.06 NL 1.17 OV 0.88 SC 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.93 FD 1.01 HN 0.90 KP 1.04 ! LA 0.95 MK 1.11 NL 0.99 OV 1.02 ! PT 1.02 SC 0.94 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.03 HN 1.02 KP 0.99 ! MK 1.01 NL 1.15 OV 0.94 SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 FD 1.03 HN 0.88 KP 1.05 ! LA 0.97 MK 1.08 NL 1.04 OV 1.01 ! PT 1.01 SC 0.96 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.94 HN 0.96 KP 1.07 ! MK 1.07 NL 1.17 OV 0.91 SC 0.95 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.93 FD 1.00 HN 0.89 KP 1.01 ! LA 1.03 MK 1.15 NL 0.99 OV 1.01 ! PT 0.99 SC 0.83 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.97 HN 0.95 KP 1.01 ! MK 1.04 NL 1.23 OV 0.90 SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 1.06 HN 0.93 KP 1.04 ! LA 0.95 MK 1.00 NL 0.98 OV 0.94 ! PT 0.96 SC 0.90 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00 HN 0.91 KP 1.03 ! MK 1.06 NL 1.18 OV 0.91 SC 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.93 FD 1.02 HN 0.92 KP 1.06 ! LA 0.99 MK 0.95 NL 1.05 OV 1.00 ! PT 0.98 SC 0.94 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.96 HN 0.94 KP 1.07 ! MK 1.00 NL 1.16 OV 0.88 SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 0.99 HN 0.91 KP 1.01 ! LA 0.98 MK 0.92 NL 0.93 OV 1.04 ! PT 0.95 SC 0.87 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.95 HN 0.98 KP 1.00 ! MK 1.01 NL 1.17 OV 0.91 SC 0.93 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 1.04 HN 0.82 KP 1.09 ! LA 1.00 MK 0.96 NL 0.91 OV 0.98 ! PT 0.95 SC 0.83 ! ! ! Fit before self-cal, rms=0.053758Jy sigma=0.451359 ! Fit after self-cal, rms=0.051857Jy sigma=0.449311 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9761 mas, bmaj=1.255 mas, bpa=38.27 degrees ! Estimated noise=0.27506 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000267695 Jy ! Component: 100 - total flux cleaned = 0.000491442 Jy ! Component: 150 - total flux cleaned = 0.000701911 Jy ! Component: 200 - total flux cleaned = 0.000841637 Jy ! Total flux subtracted in 200 components = 0.000841637 Jy ! Clean residual min=-0.000831 max=0.000945 Jy/beam ! Clean residual mean=-0.000000 rms=0.000204 Jy/beam ! Combined flux in latest and established models = 0.0860016 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 53 components and 0.0860016 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051838Jy sigma=0.449136 ! Fit after self-cal, rms=0.051848Jy sigma=0.448917 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051848Jy sigma=0.448917 ! Fit after self-cal, rms=0.051555Jy sigma=0.447591 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9773 mas, bmaj=1.239 mas, bpa=36.85 degrees ! Estimated noise=0.270557 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000312128 Jy ! Component: 100 - total flux cleaned = 0.0005359 Jy ! Component: 150 - total flux cleaned = 0.000649714 Jy ! Component: 200 - total flux cleaned = 0.000741537 Jy ! Total flux subtracted in 200 components = 0.000741537 Jy ! Clean residual min=-0.000760 max=0.000752 Jy/beam ! Clean residual mean=0.000000 rms=0.000168 Jy/beam ! Combined flux in latest and established models = 0.0867431 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 58 components and 0.0867432 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051541Jy sigma=0.447457 ! Fit after self-cal, rms=0.051566Jy sigma=0.447286 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.4, -18.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000805014 Jy ! Component: 100 - total flux cleaned = 0.00134693 Jy ! Component: 150 - total flux cleaned = 0.00166852 Jy ! Component: 200 - total flux cleaned = 0.00193402 Jy ! Total flux subtracted in 200 components = 0.00193402 Jy ! Clean residual min=-0.000739 max=0.000738 Jy/beam ! Clean residual mean=-0.000000 rms=0.000162 Jy/beam ! Combined flux in latest and established models = 0.0886772 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 75 components and 0.0886772 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051549Jy sigma=0.447120 ! Fit after self-cal, rms=0.051548Jy sigma=0.447091 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051548Jy sigma=0.447091 ! Fit after self-cal, rms=0.051287Jy sigma=0.447043 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9765 mas, bmaj=1.236 mas, bpa=37.06 degrees ! Estimated noise=0.268669 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000358361 Jy ! Component: 100 - total flux cleaned = 0.000674883 Jy ! Component: 150 - total flux cleaned = 0.000964025 Jy ! Component: 200 - total flux cleaned = 0.00118011 Jy ! Total flux subtracted in 200 components = 0.00118011 Jy ! Clean residual min=-0.000717 max=0.000706 Jy/beam ! Clean residual mean=-0.000000 rms=0.000156 Jy/beam ! Combined flux in latest and established models = 0.0898573 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 81 components and 0.0898573 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051276Jy sigma=0.446947 ! Fit after self-cal, rms=0.051280Jy sigma=0.446934 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000256847 Jy ! Component: 100 - total flux cleaned = 0.000425022 Jy ! Component: 150 - total flux cleaned = 0.000554522 Jy ! Component: 200 - total flux cleaned = 0.000684145 Jy ! Total flux subtracted in 200 components = 0.000684145 Jy ! Clean residual min=-0.000716 max=0.000681 Jy/beam ! Clean residual mean=-0.000000 rms=0.000154 Jy/beam ! Combined flux in latest and established models = 0.0905414 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 84 components and 0.0905414 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051274Jy sigma=0.446885 ! Fit after self-cal, rms=0.051274Jy sigma=0.446879 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051274Jy sigma=0.446879 ! Fit after self-cal, rms=0.051044Jy sigma=0.446862 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.043 mas, bmaj=2.377 mas, bpa=67.67 degrees ! Estimated noise=0.345776 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000662312 Jy ! Component: 100 - total flux cleaned = 0.00109649 Jy ! Component: 150 - total flux cleaned = 0.00138341 Jy ! Component: 200 - total flux cleaned = 0.0015608 Jy ! Total flux subtracted in 200 components = 0.0015608 Jy ! Clean residual min=-0.001037 max=0.000949 Jy/beam ! Clean residual mean=-0.000002 rms=0.000244 Jy/beam ! Combined flux in latest and established models = 0.0921022 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 97 components and 0.0921022 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051043Jy sigma=0.446850 ! Fit after self-cal, rms=0.051042Jy sigma=0.446834 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000269501 Jy ! Component: 100 - total flux cleaned = 0.000425351 Jy ! Component: 150 - total flux cleaned = 0.000562534 Jy ! Component: 200 - total flux cleaned = 0.000669487 Jy ! Total flux subtracted in 200 components = 0.000669487 Jy ! Clean residual min=-0.001025 max=0.000922 Jy/beam ! Clean residual mean=-0.000002 rms=0.000240 Jy/beam ! Combined flux in latest and established models = 0.0927717 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 101 components and 0.0927717 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051042Jy sigma=0.446841 ! Fit after self-cal, rms=0.051041Jy sigma=0.446833 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9758 mas, bmaj=1.233 mas, bpa=37.4 degrees ! Estimated noise=0.267468 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9758 x 1.233 at 37.4 degrees (North through East) ! Clean map min=-0.00063648 max=0.037091 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7437 mas, bmaj=0.8991 mas, bpa=32.36 degrees ! Estimated noise=0.654221 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0272025 Jy ! Component: 100 - total flux cleaned = 0.0410995 Jy ! Component: 150 - total flux cleaned = 0.0505665 Jy ! Component: 200 - total flux cleaned = 0.0574673 Jy ! Total flux subtracted in 200 components = 0.0574673 Jy ! Clean residual min=-0.001903 max=0.004000 Jy/beam ! Clean residual mean=-0.000001 rms=0.000451 Jy/beam ! Combined flux in latest and established models = 0.0574673 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.0574673 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9758 mas, bmaj=1.233 mas, bpa=37.4 degrees ! Estimated noise=0.267468 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00917353 Jy ! Component: 100 - total flux cleaned = 0.0150337 Jy ! Component: 150 - total flux cleaned = 0.0190832 Jy ! Component: 200 - total flux cleaned = 0.021945 Jy ! Total flux subtracted in 200 components = 0.021945 Jy ! Clean residual min=-0.000952 max=0.001607 Jy/beam ! Clean residual mean=-0.000000 rms=0.000241 Jy/beam ! Combined flux in latest and established models = 0.0794123 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 47 components and 0.0794123 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00207166 Jy ! Component: 100 - total flux cleaned = 0.00363946 Jy ! Component: 150 - total flux cleaned = 0.0048819 Jy ! Component: 200 - total flux cleaned = 0.00590171 Jy ! Total flux subtracted in 200 components = 0.00590171 Jy ! Clean residual min=-0.000787 max=0.000736 Jy/beam ! Clean residual mean=0.000000 rms=0.000176 Jy/beam ! Combined flux in latest and established models = 0.085314 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 67 components and 0.085314 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.043 mas, bmaj=2.377 mas, bpa=67.67 degrees ! Estimated noise=0.345776 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00158894 Jy ! Component: 100 - total flux cleaned = 0.00275111 Jy ! Component: 150 - total flux cleaned = 0.00366051 Jy ! Component: 200 - total flux cleaned = 0.0043879 Jy ! Total flux subtracted in 200 components = 0.0043879 Jy ! Clean residual min=-0.001067 max=0.000862 Jy/beam ! Clean residual mean=-0.000001 rms=0.000253 Jy/beam ! Combined flux in latest and established models = 0.0897019 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00059013 Jy ! Component: 100 - total flux cleaned = 0.00107502 Jy ! Component: 150 - total flux cleaned = 0.00147643 Jy ! Component: 200 - total flux cleaned = 0.00181063 Jy ! Total flux subtracted in 200 components = 0.00181063 Jy ! Clean residual min=-0.001043 max=0.000897 Jy/beam ! Clean residual mean=-0.000002 rms=0.000242 Jy/beam ! Combined flux in latest and established models = 0.0915125 Jy ! Adding 78 model components to the UV plane model. ! The established model now contains 128 components and 0.0915125 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9758 mas, bmaj=1.233 mas, bpa=37.4 degrees ! Estimated noise=0.267468 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000261817 Jy ! Component: 100 - total flux cleaned = 0.000410787 Jy ! Component: 150 - total flux cleaned = 0.000509222 Jy ! Component: 200 - total flux cleaned = 0.000571871 Jy ! Total flux subtracted in 200 components = 0.000571871 Jy ! Clean residual min=-0.000761 max=0.000597 Jy/beam ! Clean residual mean=-0.000001 rms=0.000151 Jy/beam ! Combined flux in latest and established models = 0.0920844 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 142 components and 0.0920844 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051050Jy sigma=0.446933 ! Fit after self-cal, rms=0.051041Jy sigma=0.446828 wmodel J1353+6324_X_a_map.mod ! Writing 142 model components to file: J1353+6324_X_a_map.mod wobs J1353+6324_X_a_uvs.fits ! Writing UV FITS file: J1353+6324_X_a_uvs.fits wwins J1353+6324_X_a_map.win ! wwins: Wrote 5 windows to J1353+6324_X_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000317239 Jy ! Component: 100 - total flux cleaned = -0.000478215 Jy ! Component: 150 - total flux cleaned = -0.000576698 Jy ! Component: 200 - total flux cleaned = -0.000629475 Jy ! Component: 250 - total flux cleaned = -0.000649911 Jy ! Component: 300 - total flux cleaned = -0.000659963 Jy ! Component: 350 - total flux cleaned = -0.000669792 Jy ! Component: 400 - total flux cleaned = -0.000660391 Jy ! Component: 450 - total flux cleaned = -0.00066062 Jy ! Component: 500 - total flux cleaned = -0.000697921 Jy ! Component: 550 - total flux cleaned = -0.000716098 Jy ! Component: 600 - total flux cleaned = -0.000752158 Jy ! Component: 650 - total flux cleaned = -0.000787769 Jy ! Component: 700 - total flux cleaned = -0.000831839 Jy ! Component: 750 - total flux cleaned = -0.000884025 Jy ! Component: 800 - total flux cleaned = -0.000909876 Jy ! Component: 850 - total flux cleaned = -0.000944009 Jy ! Component: 900 - total flux cleaned = -0.000969275 Jy ! Component: 950 - total flux cleaned = -0.00100268 Jy ! Component: 1000 - total flux cleaned = -0.00104403 Jy ! Component: 1050 - total flux cleaned = -0.0010522 Jy ! Component: 1100 - total flux cleaned = -0.00109263 Jy ! Component: 1150 - total flux cleaned = -0.00112465 Jy ! Component: 1200 - total flux cleaned = -0.00115644 Jy ! Component: 1250 - total flux cleaned = -0.00118786 Jy ! Component: 1300 - total flux cleaned = -0.00122687 Jy ! Component: 1350 - total flux cleaned = -0.00125782 Jy ! Component: 1400 - total flux cleaned = -0.00128073 Jy ! Component: 1450 - total flux cleaned = -0.0012884 Jy ! Component: 1500 - total flux cleaned = -0.00131099 Jy ! Component: 1550 - total flux cleaned = -0.0013485 Jy ! Component: 1600 - total flux cleaned = -0.00136337 Jy ! Component: 1650 - total flux cleaned = -0.0013781 Jy ! Component: 1700 - total flux cleaned = -0.00142197 Jy ! Component: 1750 - total flux cleaned = -0.00141477 Jy ! Component: 1800 - total flux cleaned = -0.00145086 Jy ! Component: 1850 - total flux cleaned = -0.00145808 Jy ! Component: 1900 - total flux cleaned = -0.00147946 Jy ! Component: 1950 - total flux cleaned = -0.00147955 Jy ! Component: 2000 - total flux cleaned = -0.00151471 Jy ! Component: 2050 - total flux cleaned = -0.00150082 Jy ! Component: 2100 - total flux cleaned = -0.0015355 Jy ! Component: 2150 - total flux cleaned = -0.00154232 Jy ! Component: 2200 - total flux cleaned = -0.0015286 Jy ! Component: 2250 - total flux cleaned = -0.00153539 Jy ! Component: 2300 - total flux cleaned = -0.00153543 Jy ! Component: 2350 - total flux cleaned = -0.00156237 Jy ! Component: 2400 - total flux cleaned = -0.00156235 Jy ! Component: 2450 - total flux cleaned = -0.00154909 Jy ! Component: 2500 - total flux cleaned = -0.00154906 Jy ! Component: 2550 - total flux cleaned = -0.00152946 Jy ! Component: 2600 - total flux cleaned = -0.00156214 Jy ! Component: 2650 - total flux cleaned = -0.00158816 Jy ! Component: 2700 - total flux cleaned = -0.00158165 Jy ! Component: 2750 - total flux cleaned = -0.00160091 Jy ! Component: 2800 - total flux cleaned = -0.00160097 Jy ! Component: 2850 - total flux cleaned = -0.00158827 Jy ! Component: 2900 - total flux cleaned = -0.00159459 Jy ! Component: 2950 - total flux cleaned = -0.00160084 Jy ! Component: 3000 - total flux cleaned = -0.00160081 Jy ! Component: 3050 - total flux cleaned = -0.00161946 Jy ! Component: 3100 - total flux cleaned = -0.00158227 Jy ! Component: 3150 - total flux cleaned = -0.00158845 Jy ! Component: 3200 - total flux cleaned = -0.00161302 Jy ! Component: 3250 - total flux cleaned = -0.00161909 Jy ! Component: 3300 - total flux cleaned = -0.00160694 Jy ! Component: 3350 - total flux cleaned = -0.00158274 Jy ! Component: 3400 - total flux cleaned = -0.00157069 Jy ! Component: 3450 - total flux cleaned = -0.0016007 Jy ! Component: 3500 - total flux cleaned = -0.00160666 Jy ! Component: 3550 - total flux cleaned = -0.001565 Jy ! Component: 3600 - total flux cleaned = -0.00154727 Jy ! Component: 3650 - total flux cleaned = -0.00155317 Jy ! Component: 3700 - total flux cleaned = -0.00154732 Jy ! Component: 3750 - total flux cleaned = -0.00153562 Jy ! Component: 3800 - total flux cleaned = -0.00154145 Jy ! Component: 3850 - total flux cleaned = -0.00157623 Jy ! Component: 3900 - total flux cleaned = -0.00156464 Jy ! Component: 3950 - total flux cleaned = -0.00155317 Jy ! Component: 4000 - total flux cleaned = -0.00155889 Jy ! Component: 4050 - total flux cleaned = -0.0015361 Jy ! Total flux subtracted in 4096 components = -0.00155317 Jy ! Clean residual min=-0.000343 max=0.000345 Jy/beam ! Clean residual mean=-0.000000 rms=0.000100 Jy/beam ! Combined flux in latest and established models = 0.0905312 Jy keep ! Adding 358 model components to the UV plane model. ! The established model now contains 500 components and 0.0905313 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uvm//J1353+6324_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9758 x 1.233 at 37.4 degrees (North through East) ! Clean map min=-0.00058694 max=0.036942 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uvm//J1353+6324_X_a_map.fits wmodel /image_prod/ug002_uvm//J1353+6324_X_a_map.mod ! Writing 500 model components to file: /image_prod/ug002_uvm//J1353+6324_X_a_map.mod wobs /image_prod/ug002_uvm//J1353+6324_X_a_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uvm//J1353+6324_X_a_uvs.fits wwins /image_prod/ug002_uvm//J1353+6324_X_a_map.win ! wwins: Wrote 6 windows to /image_prod/ug002_uvm//J1353+6324_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0369425 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 9.96166e-05 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.80896 0.80896 1.61792 3.23584 6.47168 12.9434 25.8867 51.7734 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0002 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.036 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 370.846 quit ! Quitting program ! Log file /image_prod/ug002_uvm//J1353+6324_X_a_dfm.log closed on Wed Mar 4 17:15:44 2020