! Started logfile: /image_prod/ug002_uvm//J1343+6602_X_a_dfm.log on Wed Mar 4 17:14:12 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uvm//J1343+6602_X_a_uvm.fits ! Reading UV FITS file: /image_prod/ug002_uvm//J1343+6602_X_a_uvm.fits ! AN table 1: 38 integrations on 36 of 36 possible baselines. ! AN table 2: 12 integrations on 28 of 28 possible baselines. ! AN table 3: 30 integrations on 28 of 28 possible baselines. ! AN table 4: 12 integrations on 21 of 21 possible baselines. ! AN table 5: 20 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.861201 visibilities/baseline/integration-bin. ! Found source: J1343+6602 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 121 lines of history. ! ! Reading 38196 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1343+6602_X_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 12 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 24 telescope corrections were flagged in sub-array 3. ! A total of 2 telescope corrections were flagged in sub-array 4. ! A total of 20 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 2. ! A total of 12 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 24 telescope corrections were flagged in sub-array 3. ! A total of 2 telescope corrections were flagged in sub-array 4. ! A total of 20 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 3. ! A total of 12 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 24 telescope corrections were flagged in sub-array 3. ! A total of 2 telescope corrections were flagged in sub-array 4. ! A total of 20 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 24 telescope corrections were flagged in sub-array 3. ! A total of 2 telescope corrections were flagged in sub-array 4. ! A total of 20 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 5. ! A total of 12 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 24 telescope corrections were flagged in sub-array 3. ! A total of 2 telescope corrections were flagged in sub-array 4. ! A total of 20 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 6. ! A total of 12 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 24 telescope corrections were flagged in sub-array 3. ! A total of 2 telescope corrections were flagged in sub-array 4. ! A total of 20 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 7. ! A total of 12 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 24 telescope corrections were flagged in sub-array 3. ! A total of 2 telescope corrections were flagged in sub-array 4. ! A total of 20 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 8. ! A total of 12 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 24 telescope corrections were flagged in sub-array 3. ! A total of 2 telescope corrections were flagged in sub-array 4. ! A total of 20 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 9. ! A total of 12 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 24 telescope corrections were flagged in sub-array 3. ! A total of 2 telescope corrections were flagged in sub-array 4. ! A total of 20 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 10. ! A total of 12 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 24 telescope corrections were flagged in sub-array 3. ! A total of 2 telescope corrections were flagged in sub-array 4. ! A total of 20 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 11. ! A total of 12 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 24 telescope corrections were flagged in sub-array 3. ! A total of 2 telescope corrections were flagged in sub-array 4. ! A total of 20 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 12. ! A total of 12 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 24 telescope corrections were flagged in sub-array 3. ! A total of 2 telescope corrections were flagged in sub-array 4. ! A total of 20 telescope corrections were flagged in sub-array 5. ! ! Fit before self-cal, rms=1.014871Jy sigma=8.996502 ! Fit after self-cal, rms=0.838845Jy sigma=7.403645 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7455 mas, bmaj=0.9236 mas, bpa=20.35 degrees ! Estimated noise=0.68816 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.117084 Jy ! Component: 100 - total flux cleaned = 0.151341 Jy ! Total flux subtracted in 100 components = 0.151341 Jy ! Clean residual min=-0.004844 max=0.017418 Jy/beam ! Clean residual mean=-0.000009 rms=0.001157 Jy/beam ! Combined flux in latest and established models = 0.151341 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.151341 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.086546Jy sigma=0.745338 ! Fit after self-cal, rms=0.086243Jy sigma=0.742241 ! Inverting map ! Added new window around map position (1, 0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0186444 Jy ! Component: 100 - total flux cleaned = 0.0295503 Jy ! Total flux subtracted in 100 components = 0.0295503 Jy ! Clean residual min=-0.005273 max=0.008448 Jy/beam ! Clean residual mean=-0.000005 rms=0.001012 Jy/beam ! Combined flux in latest and established models = 0.180891 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 18 components and 0.180891 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.079265Jy sigma=0.673897 ! Fit after self-cal, rms=0.079009Jy sigma=0.671733 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00885639 Jy ! Component: 100 - total flux cleaned = 0.0147566 Jy ! Total flux subtracted in 100 components = 0.0147566 Jy ! Clean residual min=-0.005454 max=0.006667 Jy/beam ! Clean residual mean=-0.000004 rms=0.000967 Jy/beam ! Combined flux in latest and established models = 0.195648 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 27 components and 0.195648 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076893Jy sigma=0.650603 ! Fit after self-cal, rms=0.076762Jy sigma=0.649441 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9669 mas, bmaj=1.162 mas, bpa=15.09 degrees ! Estimated noise=0.416336 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0114378 Jy ! Component: 100 - total flux cleaned = 0.018633 Jy ! Component: 150 - total flux cleaned = 0.0235258 Jy ! Component: 200 - total flux cleaned = 0.0269059 Jy ! Total flux subtracted in 200 components = 0.0269059 Jy ! Clean residual min=-0.005097 max=0.007204 Jy/beam ! Clean residual mean=-0.000006 rms=0.000969 Jy/beam ! Combined flux in latest and established models = 0.222554 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 41 components and 0.222554 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074903Jy sigma=0.630903 ! Fit after self-cal, rms=0.074766Jy sigma=0.629495 ! Inverting map ! Added new window around map position (-1.6, 0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00616562 Jy ! Component: 100 - total flux cleaned = 0.010164 Jy ! Component: 150 - total flux cleaned = 0.0131526 Jy ! Component: 200 - total flux cleaned = 0.0154318 Jy ! Total flux subtracted in 200 components = 0.0154318 Jy ! Clean residual min=-0.004881 max=0.004754 Jy/beam ! Clean residual mean=-0.000001 rms=0.000908 Jy/beam ! Combined flux in latest and established models = 0.237986 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 60 components and 0.237986 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074157Jy sigma=0.623707 ! Fit after self-cal, rms=0.074127Jy sigma=0.623253 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9669 x 1.162 at 15.09 degrees (North through East) ! Clean map min=-0.0044291 max=0.15419 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.01 HN 0.95 KP 1.04 ! LA 0.96 MK 0.95 OV 0.88 PT 0.89 ! SC 0.92 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.93 FD 0.93 KP 1.04 MK 0.93 ! NL 1.83 OV 0.82 PT 0.85 SC 0.81 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.93 FD 0.92 HN 0.87 KP 1.01 ! MK 0.96 NL 1.33 OV 0.87 SC 0.94 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.95 KP 1.04 LA 1.02 MK 0.92 ! NL 1.01 OV 0.85 SC 1.31 ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.01 FD 1.05 HN 0.96 KP 1.07 ! LA 1.03 MK 1.04 NL 1.07 OV 1.05 ! PT 0.98 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.98 HN 0.93 KP 1.03 ! LA 0.98 MK 0.96 OV 0.89 PT 0.87 ! SC 0.91 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.89 FD 0.98 KP 1.01 MK 0.89 ! NL 1.83 OV 0.88 PT 0.85 SC 0.83 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.89 FD 0.94 HN 0.91 KP 0.98 ! MK 0.93 NL 1.34 OV 0.89 SC 0.92 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.91 KP 1.00 LA 1.05 MK 0.90 ! NL 1.00 OV 0.87 SC 1.25 ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.02 FD 0.99 HN 0.91 KP 1.10 ! LA 1.02 MK 0.99 NL 1.10 OV 1.03 ! PT 1.02 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.99 HN 0.95 KP 1.04 ! LA 0.99 MK 1.02 OV 0.90 PT 0.89 ! SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 FD 1.00 KP 0.97 MK 0.95 ! NL 1.79 OV 0.82 PT 0.85 SC 0.92 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.91 FD 0.96 HN 0.89 KP 0.99 ! MK 0.94 NL 1.33 OV 0.87 SC 0.91 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.93 KP 1.10 LA 1.03 MK 0.92 ! NL 1.02 OV 0.87 SC 1.34 ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.01 FD 1.03 HN 0.97 KP 1.06 ! LA 1.05 MK 1.06 NL 1.04 OV 1.02 ! PT 0.98 SC 0.98 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.99 HN 1.06 KP 1.03 ! LA 0.98 MK 1.21 OV 0.89 PT 0.86 ! SC 1.07 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 FD 0.96 KP 0.96 MK 0.88 ! NL 1.78 OV 0.86 PT 0.87 SC 0.88 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.94 FD 0.94 HN 0.92 KP 0.97 ! MK 0.92 NL 1.33 OV 0.88 SC 0.96 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.94 KP 1.01 LA 1.02 MK 0.91 ! NL 1.04 OV 0.91 SC 1.25 ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.03 FD 1.02 HN 0.95 KP 1.04 ! LA 1.05 MK 1.03 NL 1.10 OV 1.05 ! PT 1.01 SC 0.99 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.03 HN 1.32 KP 1.01 ! LA 0.99 MK 1.22 OV 0.92 PT 0.87 ! SC 1.06 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.92 FD 0.96 KP 0.97 MK 0.90 ! NL 1.87 OV 0.88 PT 0.89 SC 0.92 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.90 FD 0.95 HN 0.92 KP 0.98 ! MK 0.90 NL 1.34 OV 0.90 SC 0.90 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.93 KP 1.00 LA 1.07 MK 0.89 ! NL 1.01 OV 0.87 SC 1.34 ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.01 FD 1.03 HN 0.90 KP 1.05 ! LA 1.06 MK 1.00 NL 1.04 OV 1.05 ! PT 1.00 SC 1.00 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.01 HN 1.30 KP 1.03 ! LA 0.99 MK 1.15 OV 0.92 PT 0.86 ! SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.90 FD 0.96 KP 0.98 MK 0.91 ! NL 1.86 OV 0.90 PT 0.83 SC 0.89 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.94 FD 0.94 HN 0.93 KP 0.98 ! MK 0.89 NL 1.30 OV 0.90 SC 0.94 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.92 KP 1.05 LA 1.02 MK 0.89 ! NL 1.05 OV 0.91 SC 1.37 ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.01 FD 1.04 HN 0.92 KP 1.05 ! LA 1.06 MK 0.98 NL 1.09 OV 1.06 ! PT 0.97 SC 1.00 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.07 HN 1.10 KP 1.02 ! LA 1.02 MK 1.05 OV 0.93 PT 0.88 ! SC 1.04 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.92 FD 0.97 KP 0.98 MK 0.91 ! NL 1.74 OV 0.88 PT 0.90 SC 0.89 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.90 FD 0.95 HN 0.95 KP 0.96 ! MK 0.97 NL 1.27 OV 0.93 SC 0.97 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.95 KP 1.04 LA 1.05 MK 0.91 ! NL 0.99 OV 0.89 SC 1.33 ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.02 FD 1.07 HN 0.95 KP 1.02 ! LA 1.04 MK 1.02 NL 1.08 OV 1.07 ! PT 1.02 SC 0.92 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.08 HN 1.05 KP 1.04 ! LA 1.00 MK 1.07 OV 0.98 PT 0.90 ! SC 1.13 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 1.01 KP 0.95 MK 0.92 ! NL 1.78 OV 0.85 PT 0.87 SC 0.89 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.92 FD 0.95 HN 0.90 KP 1.02 ! MK 0.95 NL 1.31 OV 0.91 SC 0.91 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.88 KP 0.99 LA 1.02 MK 0.93 ! NL 1.07 OV 0.90 SC 1.54 ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.03 FD 1.04 HN 0.97 KP 1.03 ! LA 1.00 MK 1.04 NL 1.10 OV 1.03 ! PT 1.02 SC 0.97 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.30 FD 1.09 HN 1.12 KP 1.05 ! LA 1.02 MK 1.05 OV 1.04 PT 0.89 ! SC 1.19 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.93 FD 1.01 KP 1.00 MK 0.88 ! NL 1.79 OV 0.88 PT 0.86 SC 0.88 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.90 FD 0.95 HN 0.90 KP 1.01 ! MK 0.98 NL 1.34 OV 0.88 SC 0.94 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.93 KP 1.02 LA 1.03 MK 0.95 ! NL 1.04 OV 0.85 SC 1.35 ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.99 FD 1.02 HN 0.95 KP 1.06 ! LA 1.06 MK 0.98 NL 1.05 OV 1.06 ! PT 1.00 SC 1.00 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.31 FD 1.08 HN 1.18 KP 1.05 ! LA 1.04 MK 1.07 OV 1.09 PT 0.88 ! SC 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.88 FD 1.00 KP 0.96 MK 0.91 ! NL 1.81 OV 0.89 PT 0.88 SC 0.85 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.91 FD 0.94 HN 0.90 KP 0.95 ! MK 0.94 NL 1.37 OV 0.89 SC 0.96 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.99 KP 1.05 LA 1.04 MK 0.91 ! NL 1.02 OV 0.90 SC 1.36 ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.97 FD 1.05 HN 0.96 KP 1.08 ! LA 1.06 MK 0.99 NL 1.07 OV 1.06 ! PT 0.97 SC 0.97 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.30 FD 1.07 HN 1.34 KP 1.05 ! LA 1.04 MK 1.10 OV 1.11 PT 0.89 ! SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.91 FD 0.94 KP 0.99 MK 0.97 ! NL 1.86 OV 0.89 PT 0.85 SC 0.88 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.93 FD 0.96 HN 0.90 KP 1.00 ! MK 0.96 NL 1.36 OV 0.89 SC 0.91 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.94 KP 1.06 LA 1.06 MK 0.91 ! NL 1.05 OV 0.82 SC 1.26 ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.01 FD 1.05 HN 0.95 KP 1.07 ! LA 1.03 MK 1.02 NL 1.05 OV 1.05 ! PT 1.02 SC 0.97 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.26 FD 1.10 HN 1.14 KP 1.05 ! LA 1.04 MK 1.14 OV 1.13 PT 0.87 ! SC 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.92 FD 0.95 KP 1.02 MK 0.95 ! NL 1.74 OV 0.88 PT 0.87 SC 0.94 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.93 FD 0.95 HN 0.96 KP 0.93 ! MK 0.98 NL 1.30 OV 0.88 SC 0.91 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.97 KP 1.07 LA 1.05 MK 0.91 ! NL 1.02 OV 0.84 SC 1.43 ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.01 FD 1.02 HN 1.00 KP 1.03 ! LA 1.08 MK 0.98 NL 1.00 OV 1.04 ! PT 1.03 SC 0.96 ! ! ! Fit before self-cal, rms=0.074127Jy sigma=0.623253 ! Fit after self-cal, rms=0.077250Jy sigma=0.576106 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9687 mas, bmaj=1.159 mas, bpa=16.79 degrees ! Estimated noise=0.420538 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00140711 Jy ! Component: 100 - total flux cleaned = -0.0018985 Jy ! Component: 150 - total flux cleaned = -0.00215821 Jy ! Component: 200 - total flux cleaned = -0.00219732 Jy ! Total flux subtracted in 200 components = -0.00219732 Jy ! Clean residual min=-0.003363 max=0.003297 Jy/beam ! Clean residual mean=0.000001 rms=0.000714 Jy/beam ! Combined flux in latest and established models = 0.235788 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 74 components and 0.235788 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.077179Jy sigma=0.575443 ! Fit after self-cal, rms=0.077302Jy sigma=0.575034 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.077302Jy sigma=0.575034 ! Fit after self-cal, rms=0.135776Jy sigma=0.501688 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9662 mas, bmaj=1.165 mas, bpa=17.31 degrees ! Estimated noise=0.42165 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000366616 Jy ! Component: 100 - total flux cleaned = -0.000614527 Jy ! Component: 150 - total flux cleaned = -0.000916276 Jy ! Component: 200 - total flux cleaned = -0.0011397 Jy ! Total flux subtracted in 200 components = -0.0011397 Jy ! Clean residual min=-0.001246 max=0.001510 Jy/beam ! Clean residual mean=0.000001 rms=0.000323 Jy/beam ! Combined flux in latest and established models = 0.234648 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 83 components and 0.234649 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.135750Jy sigma=0.500998 ! Fit after self-cal, rms=0.136845Jy sigma=0.500013 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-16.4, 40.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000807941 Jy ! Component: 100 - total flux cleaned = 0.000730113 Jy ! Component: 150 - total flux cleaned = 0.000590679 Jy ! Component: 200 - total flux cleaned = 0.000497277 Jy ! Total flux subtracted in 200 components = 0.000497277 Jy ! Clean residual min=-0.001211 max=0.001419 Jy/beam ! Clean residual mean=0.000001 rms=0.000317 Jy/beam ! Combined flux in latest and established models = 0.235146 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 88 components and 0.235146 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.136809Jy sigma=0.499657 ! Fit after self-cal, rms=0.136806Jy sigma=0.499621 ! Inverting map ! Added new window around map position (2, 6.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00101783 Jy ! Component: 100 - total flux cleaned = 0.00147016 Jy ! Component: 150 - total flux cleaned = 0.00159156 Jy ! Component: 200 - total flux cleaned = 0.00159211 Jy ! Total flux subtracted in 200 components = 0.00159211 Jy ! Clean residual min=-0.001227 max=0.001438 Jy/beam ! Clean residual mean=0.000000 rms=0.000313 Jy/beam ! Combined flux in latest and established models = 0.236738 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 98 components and 0.236738 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.136777Jy sigma=0.499294 ! Fit after self-cal, rms=0.136768Jy sigma=0.499265 ! Inverting map ! Added new window around map position (1.4, 27.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00101812 Jy ! Component: 100 - total flux cleaned = 0.00137527 Jy ! Component: 150 - total flux cleaned = 0.00154241 Jy ! Component: 200 - total flux cleaned = 0.00156909 Jy ! Total flux subtracted in 200 components = 0.00156909 Jy ! Clean residual min=-0.001212 max=0.001270 Jy/beam ! Clean residual mean=0.000001 rms=0.000309 Jy/beam ! Combined flux in latest and established models = 0.238307 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 112 components and 0.238307 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.136736Jy sigma=0.499047 ! Fit after self-cal, rms=0.136731Jy sigma=0.499021 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.136731Jy sigma=0.499021 ! Fit after self-cal, rms=0.144503Jy sigma=0.498804 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9637 mas, bmaj=1.167 mas, bpa=16.74 degrees ! Estimated noise=0.42102 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000336906 Jy ! Component: 100 - total flux cleaned = -0.000274027 Jy ! Component: 150 - total flux cleaned = -0.00015993 Jy ! Component: 200 - total flux cleaned = -0.000212057 Jy ! Total flux subtracted in 200 components = -0.000212057 Jy ! Clean residual min=-0.001137 max=0.001288 Jy/beam ! Clean residual mean=0.000001 rms=0.000304 Jy/beam ! Combined flux in latest and established models = 0.238095 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 117 components and 0.238095 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.144486Jy sigma=0.498553 ! Fit after self-cal, rms=0.144546Jy sigma=0.498539 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.66223e-05 Jy ! Component: 100 - total flux cleaned = 7.59726e-05 Jy ! Component: 150 - total flux cleaned = 7.60712e-05 Jy ! Component: 200 - total flux cleaned = 7.66702e-05 Jy ! Total flux subtracted in 200 components = 7.66702e-05 Jy ! Clean residual min=-0.001126 max=0.001277 Jy/beam ! Clean residual mean=0.000001 rms=0.000302 Jy/beam ! Combined flux in latest and established models = 0.238172 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 120 components and 0.238172 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.144533Jy sigma=0.498410 ! Fit after self-cal, rms=0.144535Jy sigma=0.498405 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.144535Jy sigma=0.498405 ! Fit after self-cal, rms=0.145503Jy sigma=0.498362 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.27 mas, bmaj=2.544 mas, bpa=56.35 degrees ! Estimated noise=0.550487 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.19054e-05 Jy ! Component: 100 - total flux cleaned = 8.51881e-05 Jy ! Component: 150 - total flux cleaned = 8.67232e-05 Jy ! Component: 200 - total flux cleaned = 0.0001239 Jy ! Total flux subtracted in 200 components = 0.0001239 Jy ! Clean residual min=-0.001595 max=0.001791 Jy/beam ! Clean residual mean=0.000003 rms=0.000440 Jy/beam ! Combined flux in latest and established models = 0.238295 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 138 components and 0.238296 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.145491Jy sigma=0.498304 ! Fit after self-cal, rms=0.145500Jy sigma=0.498289 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.11203e-05 Jy ! Component: 100 - total flux cleaned = 8.4528e-05 Jy ! Component: 150 - total flux cleaned = 0.000130527 Jy ! Component: 200 - total flux cleaned = 0.000129726 Jy ! Total flux subtracted in 200 components = 0.000129726 Jy ! Clean residual min=-0.001583 max=0.001785 Jy/beam ! Clean residual mean=0.000002 rms=0.000438 Jy/beam ! Combined flux in latest and established models = 0.238425 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 146 components and 0.238425 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.145494Jy sigma=0.498280 ! Fit after self-cal, rms=0.145530Jy sigma=0.498261 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9624 mas, bmaj=1.168 mas, bpa=16.37 degrees ! Estimated noise=0.420532 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9624 x 1.168 at 16.37 degrees (North through East) ! Clean map min=-0.0010611 max=0.15564 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7376 mas, bmaj=0.9284 mas, bpa=22.86 degrees ! Estimated noise=0.69833 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.118206 Jy ! Component: 100 - total flux cleaned = 0.155511 Jy ! Component: 150 - total flux cleaned = 0.175765 Jy ! Component: 200 - total flux cleaned = 0.187244 Jy ! Total flux subtracted in 200 components = 0.187244 Jy ! Clean residual min=-0.002217 max=0.006033 Jy/beam ! Clean residual mean=-0.000004 rms=0.000527 Jy/beam ! Combined flux in latest and established models = 0.187244 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.187244 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9624 mas, bmaj=1.168 mas, bpa=16.37 degrees ! Estimated noise=0.420532 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0143017 Jy ! Component: 100 - total flux cleaned = 0.0226334 Jy ! Component: 150 - total flux cleaned = 0.0280356 Jy ! Component: 200 - total flux cleaned = 0.0318631 Jy ! Total flux subtracted in 200 components = 0.0318631 Jy ! Clean residual min=-0.001407 max=0.002472 Jy/beam ! Clean residual mean=-0.000003 rms=0.000373 Jy/beam ! Combined flux in latest and established models = 0.219107 Jy ! Adding 55 model components to the UV plane model. ! The established model now contains 60 components and 0.219107 Jy ! Inverting map ! Added new window around map position (1.6, -0.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00291522 Jy ! Component: 100 - total flux cleaned = 0.00521885 Jy ! Component: 150 - total flux cleaned = 0.00719068 Jy ! Component: 200 - total flux cleaned = 0.0089137 Jy ! Total flux subtracted in 200 components = 0.0089137 Jy ! Clean residual min=-0.001264 max=0.001546 Jy/beam ! Clean residual mean=-0.000001 rms=0.000320 Jy/beam ! Combined flux in latest and established models = 0.228021 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 96 components and 0.228021 Jy ! Inverting map ! Added new window around map position (1, 2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00167271 Jy ! Component: 100 - total flux cleaned = 0.00303836 Jy ! Component: 150 - total flux cleaned = 0.00424287 Jy ! Component: 200 - total flux cleaned = 0.00527756 Jy ! Total flux subtracted in 200 components = 0.00527756 Jy ! Clean residual min=-0.001178 max=0.001332 Jy/beam ! Clean residual mean=-0.000000 rms=0.000303 Jy/beam ! Combined flux in latest and established models = 0.233298 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 117 components and 0.233298 Jy ! Inverting map ! Added new window around map position (-20, 22). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00106952 Jy ! Component: 100 - total flux cleaned = 0.00168144 Jy ! Component: 150 - total flux cleaned = 0.00224722 Jy ! Component: 200 - total flux cleaned = 0.00274017 Jy ! Total flux subtracted in 200 components = 0.00274017 Jy ! Clean residual min=-0.001181 max=0.001254 Jy/beam ! Clean residual mean=0.000000 rms=0.000296 Jy/beam ! Combined flux in latest and established models = 0.236039 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 140 components and 0.236039 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.27 mas, bmaj=2.544 mas, bpa=56.35 degrees ! Estimated noise=0.550487 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00115614 Jy ! Component: 100 - total flux cleaned = 0.00179631 Jy ! Component: 150 - total flux cleaned = 0.00213231 Jy ! Component: 200 - total flux cleaned = 0.00234781 Jy ! Total flux subtracted in 200 components = 0.00234781 Jy ! Clean residual min=-0.001474 max=0.001766 Jy/beam ! Clean residual mean=0.000002 rms=0.000434 Jy/beam ! Combined flux in latest and established models = 0.238386 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000219668 Jy ! Component: 100 - total flux cleaned = 0.000399395 Jy ! Component: 150 - total flux cleaned = 0.000524334 Jy ! Component: 200 - total flux cleaned = 0.000660687 Jy ! Total flux subtracted in 200 components = 0.000660687 Jy ! Clean residual min=-0.001483 max=0.001777 Jy/beam ! Clean residual mean=0.000003 rms=0.000431 Jy/beam ! Combined flux in latest and established models = 0.239047 Jy ! Adding 72 model components to the UV plane model. ! The established model now contains 204 components and 0.239047 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9624 mas, bmaj=1.168 mas, bpa=16.37 degrees ! Estimated noise=0.420532 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.29715e-05 Jy ! Component: 100 - total flux cleaned = 1.09417e-06 Jy ! Component: 150 - total flux cleaned = 1.42676e-06 Jy ! Component: 200 - total flux cleaned = 4.60632e-05 Jy ! Total flux subtracted in 200 components = 4.60632e-05 Jy ! Clean residual min=-0.001194 max=0.001267 Jy/beam ! Clean residual mean=0.000001 rms=0.000290 Jy/beam ! Combined flux in latest and established models = 0.239093 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 216 components and 0.239093 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.145463Jy sigma=0.497480 ! Fit after self-cal, rms=0.145584Jy sigma=0.497330 wmodel J1343+6602_X_a_map.mod ! Writing 216 model components to file: J1343+6602_X_a_map.mod wobs J1343+6602_X_a_uvs.fits ! Writing UV FITS file: J1343+6602_X_a_uvs.fits wwins J1343+6602_X_a_map.win ! wwins: Wrote 9 windows to J1343+6602_X_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000398345 Jy ! Component: 100 - total flux cleaned = 0.000814223 Jy ! Component: 150 - total flux cleaned = 0.00121383 Jy ! Component: 200 - total flux cleaned = 0.00156132 Jy ! Component: 250 - total flux cleaned = 0.00190082 Jy ! Component: 300 - total flux cleaned = 0.00217554 Jy ! Component: 350 - total flux cleaned = 0.00244629 Jy ! Component: 400 - total flux cleaned = 0.00275146 Jy ! Component: 450 - total flux cleaned = 0.00293981 Jy ! Component: 500 - total flux cleaned = 0.00308925 Jy ! Component: 550 - total flux cleaned = 0.00329297 Jy ! Component: 600 - total flux cleaned = 0.0034947 Jy ! Component: 650 - total flux cleaned = 0.00365832 Jy ! Component: 700 - total flux cleaned = 0.00383863 Jy ! Component: 750 - total flux cleaned = 0.00396397 Jy ! Component: 800 - total flux cleaned = 0.00415949 Jy ! Component: 850 - total flux cleaned = 0.00428313 Jy ! Component: 900 - total flux cleaned = 0.00444108 Jy ! Component: 950 - total flux cleaned = 0.00459791 Jy ! Component: 1000 - total flux cleaned = 0.00477108 Jy ! Component: 1050 - total flux cleaned = 0.00494316 Jy ! Component: 1100 - total flux cleaned = 0.00507989 Jy ! Component: 1150 - total flux cleaned = 0.00523287 Jy ! Component: 1200 - total flux cleaned = 0.00535113 Jy ! Component: 1250 - total flux cleaned = 0.00553593 Jy ! Component: 1300 - total flux cleaned = 0.00568626 Jy ! Component: 1350 - total flux cleaned = 0.00580258 Jy ! Component: 1400 - total flux cleaned = 0.00595156 Jy ! Component: 1450 - total flux cleaned = 0.0060996 Jy ! Component: 1500 - total flux cleaned = 0.00621422 Jy ! Component: 1550 - total flux cleaned = 0.00634461 Jy ! Component: 1600 - total flux cleaned = 0.00649065 Jy ! Component: 1650 - total flux cleaned = 0.0066843 Jy ! Component: 1700 - total flux cleaned = 0.0067807 Jy ! Component: 1750 - total flux cleaned = 0.00686064 Jy ! Component: 1800 - total flux cleaned = 0.00697217 Jy ! Component: 1850 - total flux cleaned = 0.00713085 Jy ! Component: 1900 - total flux cleaned = 0.00724152 Jy ! Component: 1950 - total flux cleaned = 0.00728867 Jy ! Component: 2000 - total flux cleaned = 0.00742978 Jy ! Component: 2050 - total flux cleaned = 0.00758578 Jy ! Component: 2100 - total flux cleaned = 0.00767898 Jy ! Component: 2150 - total flux cleaned = 0.00783387 Jy ! Component: 2200 - total flux cleaned = 0.00791095 Jy ! Component: 2250 - total flux cleaned = 0.00812608 Jy ! Component: 2300 - total flux cleaned = 0.00815665 Jy ! Component: 2350 - total flux cleaned = 0.00832437 Jy ! Component: 2400 - total flux cleaned = 0.00843069 Jy ! Component: 2450 - total flux cleaned = 0.0084912 Jy ! Component: 2500 - total flux cleaned = 0.00858173 Jy ! Component: 2550 - total flux cleaned = 0.00876214 Jy ! Component: 2600 - total flux cleaned = 0.00892667 Jy ! Component: 2650 - total flux cleaned = 0.00903114 Jy ! Component: 2700 - total flux cleaned = 0.00906086 Jy ! Component: 2750 - total flux cleaned = 0.00919426 Jy ! Component: 2800 - total flux cleaned = 0.00937149 Jy ! Component: 2850 - total flux cleaned = 0.00950391 Jy ! Component: 2900 - total flux cleaned = 0.00954789 Jy ! Component: 2950 - total flux cleaned = 0.00975241 Jy ! Component: 3000 - total flux cleaned = 0.00982514 Jy ! Component: 3050 - total flux cleaned = 0.00994124 Jy ! Component: 3100 - total flux cleaned = 0.00999911 Jy ! Component: 3150 - total flux cleaned = 0.0101578 Jy ! Component: 3200 - total flux cleaned = 0.0103159 Jy ! Component: 3250 - total flux cleaned = 0.0104306 Jy ! Component: 3300 - total flux cleaned = 0.0104877 Jy ! Component: 3350 - total flux cleaned = 0.0105732 Jy ! Component: 3400 - total flux cleaned = 0.0107153 Jy ! Component: 3450 - total flux cleaned = 0.0108144 Jy ! Component: 3500 - total flux cleaned = 0.0109415 Jy ! Component: 3550 - total flux cleaned = 0.0110683 Jy ! Component: 3600 - total flux cleaned = 0.0111246 Jy ! Component: 3650 - total flux cleaned = 0.0112226 Jy ! Component: 3700 - total flux cleaned = 0.0113483 Jy ! Component: 3750 - total flux cleaned = 0.0114877 Jy ! Component: 3800 - total flux cleaned = 0.0115433 Jy ! Component: 3850 - total flux cleaned = 0.0116127 Jy ! Component: 3900 - total flux cleaned = 0.0117094 Jy ! Component: 3950 - total flux cleaned = 0.0118474 Jy ! Component: 4000 - total flux cleaned = 0.0119162 Jy ! Component: 4050 - total flux cleaned = 0.0120397 Jy ! Total flux subtracted in 4096 components = 0.0121082 Jy ! Clean residual min=-0.000796 max=0.000807 Jy/beam ! Clean residual mean=0.000000 rms=0.000242 Jy/beam ! Combined flux in latest and established models = 0.251201 Jy keep ! Adding 373 model components to the UV plane model. ! The established model now contains 589 components and 0.251201 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uvm//J1343+6602_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9624 x 1.168 at 16.37 degrees (North through East) ! Clean map min=-0.0010655 max=0.15673 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uvm//J1343+6602_X_a_map.fits wmodel /image_prod/ug002_uvm//J1343+6602_X_a_map.mod ! Writing 589 model components to file: /image_prod/ug002_uvm//J1343+6602_X_a_map.mod wobs /image_prod/ug002_uvm//J1343+6602_X_a_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uvm//J1343+6602_X_a_uvs.fits wwins /image_prod/ug002_uvm//J1343+6602_X_a_map.win ! wwins: Wrote 10 windows to /image_prod/ug002_uvm//J1343+6602_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.156726 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000241946 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.463124 0.463124 0.926249 1.8525 3.70499 7.40999 14.82 29.64 59.2799 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.156 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 647.774 quit ! Quitting program ! Log file /image_prod/ug002_uvm//J1343+6602_X_a_dfm.log closed on Wed Mar 4 17:14:19 2020